all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 267.78 KiB | February 09 2015 | |||
1 | Cover Letter(s) | February 09 2015 | ||||||
1 | External Photos | February 09 2015 | ||||||
1 | Internal Photos | February 09 2015 | ||||||
1 | ID Label/Location Info | February 09 2015 | ||||||
1 | Cover Letter(s) | February 09 2015 | ||||||
1 | Test Report | February 09 2015 | ||||||
1 | Test Setup Photos | February 09 2015 |
1 | User Manual | Users Manual | 267.78 KiB | February 09 2015 |
Lumidigm V-Series V371 Fingerprint Reader PLT-02470 A.0 Disclaimer: The V371 Fingerprint Reader, as sold, does not perform match-on-card functionality. Match-on-card functionality may be covered by one or more patents owned by third parties, including US Patents RE43,333 and RE44,034. The V371 should not be used to perform match-on-card functionality without first determining whether a license is needed and obtaining such a license as appropriate. 1 System Requirements The V371 Software supports the following operating systems: Microsoft Windows 7/8 (64-bit)*, and Windows 7/8 (32-bit)*
*The Lumidigm Device Service 5.30.xx must be installed in order to run the V371 reader on the PC. The V371 Demo and V371 Demo source code only supports MIFARE Classic 1K and MIFARE Classic 4K smart cards with default MIFARE key values (0xFF 0xFF 0xFF 0xFF 0xFF 0xFF). The V371 Demo source code may be extended and modified to support additional smart card types and key values. Note: Windows XP is not officially supported in this release. However, 32-bit Windows XP installers are provided for the Lumidigm Device Service and the V31x device drivers. See the Lumidigm Install Guide v5.30.pdf for more information about installing onto Windows XP. 2 Installation Instructions Verify that the logged on user has full administrative privileges. 1. 2. Verify that the User Account Control Settings are set to Default Notify me only when programs try to make changes to my computer. If not, right-click on the setup exes and select run as administrator. 3. Make sure you do not have the following Lumidigm sensors plugged into the system during the installation process. V31x, M31x, and V371 4. Uninstall any previous versions of the Lumidigm Device Service. If you have version 5.10.32, 5.10.33 or 5.10.34 installed, uninstall the Lumidigm Device Service Packages v5.10.3x. Note: DO NOT uninstall Lumidigm Device Service Win 7/8 v5.10.3x program. Uninstalling the packages will remove this program automatically. If you are on version 5.00.17 or earlier, uninstall the Lumidigm Device Service Win 7/8 vX.XX.XX where XX.XX.XX is your version. 5. Run the LumidigmDeviceServicePackagesSetup_5.30.xx .exe setup (required for the fingerprint scanner embedded in the V371 reader). To download the most recent software package, see:
http://www.hidglobal.com/developer-center/lumidigm-developer-center. Select Complete install. This installer will install the required Windows service and device drivers for the V31x and M31x sensors. Note: If you uninstall the LumidigmDeviceServicePackages, the V31x and M31x device drivers will also be uninstalled. This installer only supports Windows 7/8 (32 and 64 bit). 6. Run the Lumidigm V371 VCOM_32-bit_5.30.xx.exe. This installer will install the Lumidigm VCOM Integration Kit along with the V371 Demo source code and compiled V371 Demo. Plug the HID Global Lumidigm V371 Fingerprint Reader into the PC. 7. The device drivers for the card reader should load automatically The device drivers for the fingerprint scanner should load automatically In the Device Manager, the smart card reader should now display as OMNIKEY 5x21 under the Smart card readers group. If it does not display, right-click the device, and select Update Driver Software. In the Device Manager, the fingerprint scanner should display as a Lumidigm V31x Fingerprint Reader under the Lumidigm Biometric Sensor group. 8. Run the compiled version. See the User Guide and Section 2: Installation Instructions for more information. The compiled version of the V371 demo is installed in C:\Program Files (x86)\HID Global\Lumidigm Release v5.30. xx\VCOM-Integration-Kit\bin\install\V371Demo.exe. Note: This can be run from the Start menu > All Programs > HID Global > Lumidigm Release v5.30.xx > VCOM Integration Kit 32-bit > V371 Demo. 9. Build the V371 source code. See Section 4: Build the V371 Demo Source Code. hidglobal.com INSTALLATION GUIDEAn ASSA ABLOY Group brandThis Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output are fictitious. Specifications are subject to change without notice. 2015 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS SE are trademarks or registered trademarks of HID Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. Note: When a smart card is inserted into the card reader slot of the V371, smart card Plug and Play detection may not work as expected. You may receive a windows message stating that the driver software was not installed correctly. The smart card will work as expected in this situation even with this message. If this message needs to be suppressed, follow these instructions to disable smart card plug and play in the local group policy. Make sure that this is the correct course of action for your deployment. From Microsoft: http://technet.microsoft.com/en-us/library/dd979547%28v=ws.10%29.aspx Each time a smart card is inserted in the computer, Windows attempts to download and install the smart card driver if it is not already available on the computer. You may see a Plug and Play error when you insert a non-Plug and Play smart card on the computer. This does not necessarily mean that there is a problem with the smart card. If your deployment uses only non-Plug and Play smart card solutions, smart card Plug and Play can be disabled by a local administrator on a client computer. Disabling smart card Plug and Play prevents smart card drivers, also known as smart card mini-drivers, from downloading and prevents smart card Plug and Play prompts. 3 To Disable Smart Card Plug and Play in Local Group Policy Enter gpedit.msc in the Search programs and files box, and press Enter. In the console tree under Computer Configuration, click Administrative Templates. In the details pane, double-click Windows Components, and Double-click Smart Card. 1. On a client computer, click Start. 2. 3. 4. 5. Right-click Turn on Smart Card Plug and Play service, and click Edit. 6. Click Disabled. 7. Click OK, and reboot system for changes to take effect (Reboot may be required) For enterprise deployments, smart card Plug and Play can be disabled by deploying a Group Policy. For information about administrative templates, see Administrative templates overview for GPMC (http://go.microsoft.com/fwlink/?LinkId=152390). 4 Build the V371 Demo Source Code 1. The solution and project files are Visual Studio 2005. You may need to convert to your version of Visual Studio and make additional changes for the source code to work. 2. Open the V371Demo solution file located in C:\Program Files (x86)\HID Global\Lumidigm Release v5.30.xx \VCOM-
Integration-Kit\SampleCode\V371Demo\Build. Set the V371Demo project as the StartUp project. Set the working directory to ..\..\..\bin or C:\Program Files (x86)\HID Global\Lumidigm Release v5.30.xx \VCOM-
Integration-Kit\bin. Note: Be sure to build as Win32. 3. 4. 5 V371 Demo Overview The HID Global Lumidigm V371 Demo provides an insight into the enrollment and verification capabilities of the HID Global Lumidigm V371 using a MIFARE Classic 1K and MIFARE Classic 4K Smart cards. The application is a simple MFC C++ GUI program developed using Visual Studio 2005. The application utilizes the Lumidigm VCOM API to interface with the fingerprint sensor (HID Lumidigm V310 Sensor) and communicates with the smart card reader (HID OMNIKEY CardMan 5x21-CL) using the Microsoft PC SC API. FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Any changes or modifications to this devise not explicitly approved by the manufacturer could void your authority to operate this equipment. Canada Radio CeRtiFiCation This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
(1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Ce MaRking HID Global hereby declares that these proximity readers are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Por el presente, HID Global declara que estos lectores de proximidad cumplen con los requisitos esenciales y otras disposiciones relevantes de la Directiva 1999/5/EC. HID Global dclare par la prsente que ces lecteurs proximit sont conformes aux exigences essentielles et aux autres stipulations pertinentes de la Directive 1999/5/CE. A HID Global, por meio deste, declara que estes leitores de proximidade esto em conformidade com as exigncias essenciais e outras condies da diretiva 1999/5/EC. HID Global besttigt hiermit, dass die Leser die wesentlichen Anforderungen und anderen relevanten Bestimmungen der Richtlinie 1999/5/EG erfllen. HID Global dichiara che i lettori di prossimit sono conformi ai requisiti essenziali e ad altre misure rilevanti come previsto dalla Direttiva europea 1999/5/EC. Download copies of the R&TTE Declaration of Conformity (DoC) at http://www.hidglobal.com/certifications. HID Global Americas & Corporate 611 Center Ridge Drive Austin, TX 78758 USA Support:
Fax:
866-607-7339 949-732-2120 Asia Pacific 19/F 625 King's Road North Point, Island East Hong Kong Support:
Fax:
852-3160-9833 852-3160-4809 Europe, Middle East & Africa Phoenix Road Haverhill, Suffolk CB9 7AE England Support:
Fax:
55 11 5514-7100 55 11 5514-7109 For additional offices around the world, see www.hidglobal.com corporate offices. HID Global Customer Support: support.hidglobal.com hidglobal.com Page 2 An ASSA ABLOY Group brandINSTALLATION GUIDELumidigm V-Series V371 Fingerprint Reader PLT-02470 A.0 Lumidigm V-Series V371 Lecteur d'empreintes digitales Avis de non-responsabilit: Le V371 lecteur d'empreintes digitales, tel qu'il est vendu, ne prend pas en charge la fonctionnalit Match On Card. La fonctionnalit Match On Card est possiblement couverte par un ou plusieurs brevets dtenus par des tierces parties, dont les brevets amricains RE43,333 et RE44,034. Le V371 ne doit pas tre utilis pour excuter la fonctionnalit Match On Card sans qu'il soit d'abord dtermin si une licence est ncessaire et sans l'obtention d'une telle licence, le cas chant. 1 Configuration requise Le logiciel du V371 prend en charge les systmes d'exploitation suivants:
Microsoft Windows 7/8 (64 bits)*
Microsoft Windows 7/8 (32 bits)*
*Lumidigm Device Service 5.30.xx doit tre install afin de pouvoir lancer le lecteur V371 sur l'ordinateur. La version dmo du V371 et le code source de la version dmo du V371 prennent uniquement en charge les cartes puce MIFARE Classic 1K et MIFARE Classic 4K avec les valeurs de cl MIFARE par dfaut (0xFF 0xFF 0xFF 0xFF 0xFF 0xFF). Le code source de la version dmo du V371 peut tre tendu et modifi afin de prendre en charge d'autres types de cartes puce et d'autres valeurs de cl. Note: Windows XP n'est pas officiellement pris en charge dans cette version. Des programmes d'installation pour Windows XP 32 bits sont cependant fournis pour Lumidigm Device Service et pour les pilotes de priphrique du V31x. Consultez le fichier Lumidigm Install Guide v5.30.pdf pour plus d'informations sur l'installation sur Windows XP. 2 Instructions d'installation Vrifiez que l'utilisateur connect dispose de tous les privilges d'administration. 1. 2. Vrifiez que les Paramtres de contrle de compte d'utilisateur sont rgls sur Par dfaut. M'avertir uniquement quand des programmes tentent d'apporter des modifications mon ordinateur. Sinon, cliquez avec le bouton droit de la souris sur le fichier setup.exe et slectionnez Excuter en tant qu'administrateur. 3. Assurez-vous que les capteurs Lumidigm suivants ne sont pas connects votre systme pendant l'installation. V31x, M31x et V371 4. Dsinstallez toute version prcdente de Lumidigm Device Service. Si la version 5.10.32, 5.10.33 ou 5.10.34 est installe sur votre systme, dsinstallez Lumidigm Device Service Packages v5.10.3x. Note: NE PAS dsinstaller le programme Lumidigm Device Service Win 7/8 v5.10.3x . Ce programme sera supprim automatiquement lors de la dsinstallation des packages. Si vous utilisez la version 5.00.17 ou une version antrieure, dsinstallez Lumidigm Device Service Win 7/8 vX.XX.XX where XX.XX.XX est le numro de votre version. 5. Excutez le fichier d'installation LumidigmDeviceServicePackagesSetup_5.30.xx .exe (ncessaire pour le scanneur d'empreintes digitales intgr dans le lecteur V371). Pour tlcharger le logiciel le plus rcent, voir:
http://www.hidglobal.com/developer-center/lumidigm-developer-center. Slectionnez Complete install. Le programme d'installation installera les services Windows et les pilotes de priphrique pour les capteurs V31x et M31x. Note: Si vous dsinstallez les packages Lumidigm Device Service, les pilotes de priphrique V31x et M31x seront galement dsinstalls. Ce programme d'installation ne prend en charge que Windows 7/8 (32 and 64 bits). 6. 7. Excutez le fichier V371 VCOM_32-bit_5.30.xx.exe. Ce programme d'installation installera le kit d'intgration Lumidigm VCOM ainsi que le code source de la version dmo du V371 et la version dmo compile du V371. Connectez le lecteur d'empreintes digitales HID Global Lumidigm V371 l'ordinateur. Les pilotes de priphrique pour le lecteur de cartes devraient tre chargs automatiquement. Les pilotes de priphrique pour le scanneur d'empreintes digitales devraient tre chargs automatiquement. Dans le Gestionnaire de priphriques, le lecteur de cartes puce devrait maintenant tre affich sous le nom OMNIKEY 5x21 dans le groupe Lecteurs de cartes puce. S'il n'apparat pas, cliquez avec le bouton droit de la souris sur le priphrique, puis slectionnez l'option Mettre jour le pilote. Dans le Gestionnaire de priphriques, le scanneur d'empreintes digitales devrait maintenant tre affich sous le nom Lumidigm V31x Fingerprint Reader dans le groupe Lumidigm Biometric Sensor. hidglobal.com Page 3 INSTALLATION GUIDEAn ASSA ABLOY Group brandThis Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output are fictitious. Specifications are subject to change without notice. 2015 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS SE are trademarks or registered trademarks of HID Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. Lumidigm V-Series V371 Fingerprint Reader PLT-02470 A.0 8. Excutez la version compile. Pour plus d'informations, voir le guide de l'utilisateur et la Section 2: Instructions d'installation. La version compile et la version dmo du V371 sont installes sous C:\Program Files (x86)\HID Global\Lumidigm Release v5.30.xx\VCOM-Integration-Kit\bin\install\V371Demo.exe. Note: Le programme peut tre lanc depuis le menu suivant: Start> All Programs > HID Global > Lumidigm Release v5.30.xx > VCOM Integration Kit 32-bit > V371 Demo. 9. Compilez le code source du V371. Voir la Section 4: Compiler le code source de la version dmo du V371. Note: Lorsque vous insrez une carte puce dans la fente du lecteur de cartes V371, il est possible que la dtection Plug-and-
Play de cartes puce ne fonctionne pas comme prvu. Il est possible que vous receviez un message Windows vous signalant que le pilote n'a pas t install correctement. Dans ce cas, la carte puce ne fonctionnera pas comme prvu, mme avec ce message. Si ce message doit tre supprim, suivez ces instructions pour dsactiver la fonction Plug-and-Play de cartes puce dans la stratgie de groupe locale. Assurez-vous qu'il s'agit de la bonne mesure pour la mise en uvre de votre systme. Pour Microsoft: http://technet.microsoft.com/en-us/library/dd979547%28v=ws.10%29.aspx Chaque fois qu'une carte puce est insre dans l'ordinateur, Windows tente de tlcharger et d'installer le pilote de cartes puce si celui-ci n'est pas dj disponible sur l'ordinateur. Il est possible qu'une erreur de Plug-and-Play survienne lorsque vous insrez une carte puce non Plug-and-Play dans l'ordinateur. Cela ne signifie pas ncessairement qu'il y a un problme avec la carte puce. Si votre systme n'utilise que des solutions de cartes puce non Plug-and-Play, la fonction Plug-and-Play pour cartes puce peut tre dsactive par un administrateur local sur un ordinateur client. La dsactivation de la fonction Plug-and-Play pour cartes puce empche le tlchargement des pilotes de cartes puce, galement connus sous le terme de minipilotes, ainsi que l'affichage d'invites Plug-and-Play pour cartes puce. 3 Dsactiver la fonction Plug-and-Play pour cartes puce dans la stratgie de groupe Sur un ordinateur client, cliquez sur Dmarrer. Entrez gpedit.msc dans le champ Rechercher les programmes et fichiers, puis appuyez sur Entre. locale. 1. 2. 3. Dans l'arborescence de la console apparaissant sous Configuration ordinateur, cliquez sur Modles d'administration. 4. Dans le volet de dtails, double-cliquez sur Composants Windows. 5. Double-cliquez sur Carte puce. 6. Cliquez avec le bouton droit de la souris sur Activer le service Plug-and-Play de la carte puce. 7. 8. Cliquez sur Dsactiv. 9. Cliquez sur OK. 10. Redmarrez le systme pour que les changements prennent effet (le redmarrage peut tre ncessaire) Cliquez sur Modifier. Pour la mise en uvre de systmes en entreprise, la fonction Plug-and-Play pour cartes puce peut tre dsactive l'aide d'une stratgie de groupe. Pour plus d'informations sur les modles d'administration, voir la page Vue d'ensemble des modles d'administration pour GPMC (http://go.microsoft.com/fwlink/?LinkId=152390). hidglobal.com Page 4 INSTALLATION GUIDEAn ASSA ABLOY Group brandThis Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output are fictitious. Specifications are subject to change without notice. 2015 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS SE are trademarks or registered trademarks of HID Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. Lumidigm V-Series V371 Fingerprint Reader PLT-02470 A.0 Lumidigm V-Series V371 Fingerabdruck-Lesegert Haftungsausschluss Das zum Verkauf verfgbareV371 Fingerabdruck-Lesegert bietet keine Match-on-Card-Technologie. Match-on-Card-Funktionen werden ggf. ber ein oder mehrere Patente von Drittanbietern bereit gestellt, u. a. ber die US-
amerikanischen Patente RE43,333 und RE44,034. Das V371 sollte nicht zusammen mit Match-on-Card-Technologie zum Einsatz kommen, wenn nicht zunchst abgeklrt ist, ob dazu eine Lizenz bentigt und dementsprechend bei Bedarf eine solche erworben wird. 1 Systemanforderungen Die V371 -Software untersttzt die folgenden Betriebssysteme:
Microsoft Windows 7/8 (64-Bit)*
Microsoft Windows 7/8 (32-Bit)*
*Der Lumidigm Device Service 5.30.xx muss installiert sein, damit das V371 -Lesegert mit einem PC genutzt werden kann. Die V371 -Demo und der V371 -Demo-Quellcode untersttzt MIFARE Classic 1K- und MIFARE Classic 4K- Smartcards mit standardmigen MIFARE -Schlsselwerten (0xFF 0xFF 0xFF 0xFF 0xFF 0xFF). Der V371-Demo-Quellcode kann zur Untersttzung zustzlicher Smartcardtypen und Schlsselwerte ggf. erweitert und angepasst werden. Hinweis: Windows XP wird mit dieser Version offiziell nicht untersttzt. Allerdings werden fr den Lumidigm-Gertedienst und die V31x-Gertetreiber 32-Bit-Windows XP-Installationsprogramme bereitgestellt. In der Lumidigm Install Guide v5.30.pdf finden Sie weitere Informationen zur Installation unter Windows XP. 2 Installationsanweisungen berprfen Sie, ob der angemeldete Nutzer ber vollstndige administrative Berechtigungen verfgt. 1. 2. berprfen Sie, ob die Einstellungen der Benutzerkontensteuerung auf Standard Benachrichtigung, wenn Programme versuchen, nderungen am Computer vorzunehmen gesetzt sind. Wenn dies nicht der Fall ist, klicken Sie mit der rechten Maustaste auf die Datei setup.exe und whlen die Option Als Administrator ausfhren. Stellen Sie sicher, dass whrend der Installation die folgenden Lumidigm-Sensoren ans System angeschlossen sind. 3. V31x, M31x und V371 4. Deinstallieren Sie smtliche frheren Versionen des Lumidigm-Gertedienstes. Wenn die Versionen 5.10.32, 5.10.33 oder 5.10.34 installiert sind, deinstallieren Sie die Lumidigm Device Service Packages v5.10.3x. Hinweis: Deinstallieren Sie NICHT das Lumidigm Device Service Win 7/8 v5.10.3x -Programm. Durch die Deinstallation der Pakete wird dieses Programm automatisch entfernt. Falls Sie die Version 5.00.17 oder eine frhere nutzen, deinstallieren Sie die Lumidigm Device Service Win 7/8 vX.XX. XX where XX.XX.XX, bei derLumidigm Device Service Win 7/8 vX.XX.XX where XX.XX.XX Ihre Version ist. 5. Fhren Sie das LumidigmDeviceServicePackagesSetup_5.30.xx .exe-Setup aus (notwendig fr den Fingerabdruck-Scanner im V371-Lesegert). Um die neuesten Software-Paket herunterladen, finden Sie unter:
http://www.hidglobal.com/developer-center/lumidigm-developer-center. When Sie Vollstndig (Complete) bei der Installation aus. Durch dieses Installationsprogramm werden der bentigte Windows-Dienst und die Gertetreiber fr die V31x- und M31x-Sensoren installiert. Hinweis: Falls Sie die Lumidigm-Gertedienstpakete deinstallieren, werden die V31x- und M31x-Gertetreiber ebenfalls deinstalliert. Das Installationsprogramm untersttzt lediglich Windows 7/8 (32- und 64-Bit). 6. 7. Fhren Sie die Lumidigm V371 VCOM_32-bit_5.30.xx.exe-Datei aus. Durch dieses Installationsprogramm wird das Lumidigm VCOM Integration Kit zusammen mit dem V371-Demo-Quellcode und der kompilierten V371-Demo installiert. Verbinden Sie das HID Global Lumidigm V371-Fingerabdruck-Lesegert mit dem PC. Die Gertetreiber fr das Kartenlesegert sollten automatisch geladen werden. Die Gertetreiber fr den Fingerabdruckscanner sollten automatisch geladen werden. Das Smartcard-Lesegert sollte nun im Gertemanager unter der Smartcard-Lesegertegruppe als OMNIKEY 5x21 angezeigt werden. Falls es nicht angezeigt wird, klicken Sie mit der rechten Maustaste auf das Gert und whlen Treibersoftware aktualisieren. Der Fingerabdruck-Scanner sollte im Gertemanager unter der Lumidigm Biometric-Sensorengruppe als Lumidigm V31x-Fingerabdruck-Lesegert angezeigt werden. hidglobal.com Page 5 INSTALLATION GUIDEAn ASSA ABLOY Group brandThis Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output are fictitious. Specifications are subject to change without notice. 2015 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS SE are trademarks or registered trademarks of HID Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. Lumidigm V-Series V371 Fingerprint Reader PLT-02470 A.0 8. Fhren Sie die kompilierte Version aus. Im Benutzerhandbuch und im Abschnitt2: Installationsanweisungen finden Sie dazu weitere Informationen. Die kompilierte Version der V371-Demo wird ber C:\Program Files (x86)\HID Global\Lumidigm Release v5.30.xx\
VCOM-Integration-Kit\bin\install\V371Demo.exe installiert. Hinweis: Dies kann ber das Start -Men > All Programs > HID Global > Lumidigm Release v5.30.xx > VCOM Integration Kit 32-bit > V371 Demo ausgefhrt werden. 9. Erstellen Sie den V371-Quellcode. Informationen dazu finden Sie unter Abschnitt4: Erstellen des V371-Demo-Quellcodes. Hinweis: Wenn eine Smartcard in den Steckkplatz des V371-Lesegerts geschoben wird, erfolgt die Plug-and-Play-Erkennung ggf. nicht wie erwartet. Sie erhalten mitunter eine Windows-Meldung mit dem Hinweis, dass die Treibersoftware nicht ordnungsgem installiert wurde. Die Smartcard wird trotz dieser Meldung aber dennoch erwartungsgem funktionieren. Wenn diese Meldung unterdrckt werden soll, befolgen Sie folgende Anweisungen, um die Smartcard-Plug-and-Play-Funktion in der lokalen Gruppenrichtlinie zu deaktivieren. Vergewissern Sie sich, dass diese die korrekte Vorgehensweise fr Ihre Bereitstellung ist. Von Microsoft: http://technet.microsoft.com/en-us/library/dd979547%28v=ws.10%29.aspx Bei jedem Einlegen einer Smartcard in den Steckplatz eines Computers versucht Windows, den Smartcard-Treiber herunterzuladen und zu installieren, wenn dieser nicht bereits auf dem Computer zur Verfgung steht. Eventuell wird Ihnen ein Plug-and-Play-Fehler angezeigt, wenn Sie eine nicht Plug-und-Play-fhige Smartcard in den Steckplatz des Computers einlegen. Dies bedeutet aber nicht unbedingt, dass es ein Problem mit der Smartcard gibt. Falls fr Ihren Einsatz von Smartcards lediglich nicht Plug-and-Play-fhige Smartcard-Lsungen vorgesehen sind, kann Plug-and-
Play vom zustndigen Administrator auf einem Client-Computer deaktiviert werden. Durch die Deaktivierung der Smartcard-
Plug-and-Play-Funktion wird verhindert, dass Smartcard-Treiber (auch bekannt als Smartcard-Minitreiber) heruntergeladen und Plug-and-Play-Meldungen angezeigt werden. 3 Deaktivieren der Smartcard-Plug-and-Play-Funktion in der lokalen Gruppenrichtlinie Klicken Sie auf einem Client-Computer auf Start. 1. 2. Geben Sie in das Suchfeld fr Programme und Dateien gpedit.msc ein und drcken dann die Eingabetaste. 3. Klicken Sie in der Konsolenstruktur unter Computerkonfiguration auf Administrative Vorlagen. 4. Doppelklicken Sie in der Detailansicht auf Windows-Komponenten. 5. Doppelklicken Sie auf Smartcard. 6. Klicken Sie mit der rechten Maustaste auf Aktivieren des Smartcard-Plug-and-Play-Dienstes. Klicken Sie auf Bearbeiten. 7. 8. Klicken Sie auf Deaktiviert. 9. Klicken Sie auf OK. 10. Starten Sie das System neu, damit die nderungen wirksam werden (dazu ist ggf. ein Neustart notwendig). Bei unternehmensweiten Bereitstellungen kann der Smartcard-Plug-and-Play-Dienst durch eine Gruppenrichtlinie deaktiviert werden. Weitere Informationen zu administrativen Vorlagen finden Sie in der bersicht zu administrativen Vorlagen fr GPMC
(http://go.microsoft.com/fwlink/?LinkId=152390). 4 Erstellen des V371-Demo-Quellcodes 1. Visual Studio 2005 sind die Lsungs- und Projektdateien. Eventuell mssen Sie eine Konvertierung auf Ihre Visual Studio-
Version und zustzliche nderungen vornehmen, damit der Quellcode ordnungsgem funktioniert. 2. ffnen Sie die V371-Demo-Lsungsdatei unter C:\Program Files (x86)\HID Global\Lumidigm Release v5.30.xx \VCOM-
Integration-Kit\SampleCode\V371Demo\Build. 3. Richten Sie das V371-Demo-Projekt als das StartUp-Projekt ein. 4. Legen Sie den Pfad des Arbeitsverzeichnisses fest (..\..\..\bin or C:\Program Files (x86)\HID Global\Lumidigm Release v5.30.xx \VCOM-Integration-Kit\bin). Hinweis: Stellen Sie sicher, dass eine Win32-Programmierung erfolgt. 5 V371-Demo-bersicht Die HID Global Lumidigm V371-Demo bietet einen Einblick in Anmeldungs- und Verifizierungsfunktionen des HID Global Lumidigm V371, das eine MIFARE Classic 1K und MIFARE Classic 4K-Smartcards verwendet. Bei der Anwendung handelt es sich um ein einfaches MFC C++-GUI-Programm, das mit Visual Studio 2005 entwickelt wurde. Die Anwendung nutzt die Lumidigm VCOM-Programmierschnittstelle zum Fingerabdrucksensor (HID Lumidigm V310 -Sensor) und kommuniziert mit dem Smartcard-
Lesegert (HID OMNIKEY CardMan 5x21-CL) ber die Microsoft PC SC-Programmierschnittstelle. hidglobal.com Page 6 INSTALLATION GUIDEAn ASSA ABLOY Group brandThis Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output are fictitious. Specifications are subject to change without notice. 2015 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS SE are trademarks or registered trademarks of HID Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. Lumidigm V-Series V371 Fingerprint Reader PLT-02470 A.0 Lumidigm V-Series V371 Lettore di impronte digitali Disclaimer: Il V371 lettore di impronte digitali, nella forma in cui viene venduto, non offre la funzionalit Match-on-Card. La funzionalit Match-on-Card pu essere coperta da uno o pi brevetti di propriet di terze parti, inclusi i brevetti statunitensi RE43,333 e RE44,034. V371 non deve essere utilizzato per adempiere alla funzionalit Match-on-Card senza prima determinare se sia necessaria una licenza ed averla ottenuta in modo opportuno. 1 Requisiti di sistema Il software V371 supporta i seguenti sistemi operativi:
Microsoft Windows 7/8 (64 bit)*
Microsoft Windows 7/8 (32 bit)*
*Per poter eseguire il lettore V371 sul PC, necessario installare Lumidigm Device Service 5.30.xx. Il codice sorgente del demo di V371 e del demo di V371 supporta solo smart card MIFARE Classic 1K e MIFARE Classic 4K con valori chiave predefiniti MIFARE (0xFF 0xFF 0xFF 0xFF 0xFF 0xFF). Il codice sorgente del demo di V371 pu essere esteso e modificato per il supporto di tipologie agggiuntive di smart card e valori chiave. Nota: Windows XP non supportato ufficialmente in questa versione. Tuttavia, i programmi di installazione di Windows XP a 32 bit sono forniti per Lumidigm Device Service e per i driver del dispositivo V31x. Per ulteriori informazioni in merito allinstallazione su Windows XP, consultare Lumidigm Install Guide v5.30.pdf . 2 Istruzioni di installazione Verificare che lutente connesso disponga di privilegi di amministrazione completi. 1. 2. Verificare che Impostazioni di Controllo account utente siano impostate su Un programma tenta di eseguire modifiche nel computer (impostazione predefinita). In caso contrario, fare clic con il pulsante destro del mouse sullexe di configurazione e selezionare Esegui come amministratore. 3. Assicurarsi di non aver collegato al sistema i seguenti sensori Lumidigm durante il processo di installazione. V31x, M31x e V371 4. Disinstallare qualsiasi versione precedente di Lumidigm Device Service. Se stata installata la versione 5.10.32, 5.10.33 o 5.10.34, disinstallare Lumidigm Device Service Packages v5.10.3x. Nota: NON disinstallare il programma Lumidigm Device Service Win 7/8 v5.10.3x . La disinstallazione dei pacchetti rimuover automaticamente questo programma. Se si utilizza la versione 5.00.17 o una precedente, disinstallare Lumidigm Device Service Win 7/8 vX.XX.XX where XX.XX.XX rappresenta la versione dellutente. 5. Eseguire il programma di installazione LumidigmDeviceServicePackagesSetup_5.30.xx .exe (necessario per il lettore di impronte digitali integrato nel lettore V371). Per scaricare il pacchetto software pi recente, si veda:
http://www.hidglobal.com/developer-center/lumidigm-developer-center. Selezionare Complete install. Il programma di installazione installer il servizio Windows e i driver dispositivo necessari per i sensori V31x e M31x. Nota: se si disinstalla LumidigmDeviceServicePackages, saranno disinstallati anche i driver dei dispositivi V31x e M31x. Questo programma di installazione supporta solo Windows 7/8 (32 e 64 bit). 6. Eseguire Lumidigm V371 VCOM_32-bit_5.30.xx.exe. Il programma di installazione installer Lumidigm VCOM Integration Kit, insieme al codice sorgente demo di V371 e al demo compilato di V371. 7. Collegare il lettore di impronte digitali HID Global Lumidigm V371 al PC. I driver di dispositivo per il lettore di schede dovrebbero caricarsi automaticamente I driver di dispositivo per il lettore di impronte digitali dovrebbero caricarsi automaticamente In Gestione dispositivi, il lettore di smart card dovrebbe essere visualizzato adesso come OMNIKEY 5x21 nel gruppo lettori Smart card. Se non presente, fare clic con il pulsante destro del mouse sul dispositivo, quindi selezionare Aggiornamento software driver. In Gestione dispositivi, lo scanner di impronte digitali dovrebbe essere visualizzato come Lumidigm V31x Fingerprint Reader nel gruppo Lumidigm Biometric Sensor. 8. Eseguire la versione compilata. Per ulteriori informazioni, vedere la Guida utente e la Sezione 2: Istruzioni di installazione. La versione compilata del demo di V371 installata su C:\Program Files (x86)\HID Global\Lumidigm Release v5.30. xx\VCOM-Integration-Kit\bin\install\V371Demo.exe. Nota: questo pu essere eseguito dal menu Start > All Programs > HID Global > Lumidigm Release v5.30.xx >
VCOM Integration Kit 32-bit > V371 Demo. 9. Compilazione del codice sorgente V371. Vedere la Sezione 4: Compilazione del codice sorgente demo V371. hidglobal.com Page 7 INSTALLATION GUIDEAn ASSA ABLOY Group brandThis Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output are fictitious. Specifications are subject to change without notice. 2015 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS SE are trademarks or registered trademarks of HID Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. Lumidigm V-Series V371 Fingerprint Reader PLT-02470 A.0 Nota: quando una smart card inserita nello slot del lettore schede di V371, il rilevamento Plug and Play della smart card potrebbe non funzionare come previsto. Lutente potrebbe ricevere un messaggio Windows, il quale indica lerrata installazione del software del driver. La smart card funzioner come previsto in questa situazione, persino con questo messaggio. Se il messaggio deve essere eliminato, attenersi alle seguenti istruzioni per disabilitare il plug and play della smart card nel criterio del gruppo locale. Accertarsi che sia lazione corretta da eseguire per la distribuzione. Da Microsoft: http://technet.microsoft.com/en-us/library/dd979547%28v=ws.10%29.aspx Ogni volta che una smart card viene inserita nel computer, Windows tenta di scaricarla e di installare il driver della smart card, se non gi presente nel computer. Al momento di inserire una smart card non Plug and Play nel computer, possibile visualizzare un errore Plug and Play. Questo non implica necessariamente che vi sia un problema con la smart card. Se la distribuzione dellutente si basa esclusivamente su soluzioni smart card non Plug and Play, il Plug and Play della smart card pu essere disabilitato da un amministratore locale su un computer client. La disabilitazione del Plug and Play della smart card impedisce anche il download dei relativi driver, noti anche come mini driver della smart card, impedendo i prompt del Plug and Play. 3 Disabilitazione del Plug and Play della smart card nel criterio del gruppo locale Su un computer client, fare clic su Start. 1. 2. Digitare gpedit.msc nella casella Cerca programmi e file, quindi premere Invio. 3. Nella struttura della console sotto Configurazione computer, fare clic su Modelli amministrativi. 4. Nel riquadro dettagli, fare doppio clic su Componenti di Windows. 5. 6. 7. 8. 9. 10. Affinch le modifiche abbiano effetto, riavviare il sistema (potrebbe essere necessario effettuare il riavvio) Fare doppio clic su Smart Card. Fare clic con il pulsante destro del mouse su Attiva il servizio Plug and Play della smart card. Fare clic su Modifica. Fare clic su Disattivato. Fare clic su OK. Per le distribuzioni aziendali, il Plug and Play della smart card pu essere disabilitando mediante la distribuzione di un criterio di gruppo. Per informazioni in merito ai modelli amministrativi, vedere la panoramica dei modelli amministrativi per GPMC (http://
go.microsoft.com/fwlink/?LinkId=152390). 4 Compilazione del codice sorgente demo V371 1. I file della soluzione e del progetto sono Visual Studio 2005. Affinch il codice sorgente funzioni, potrebbe essere necessario effettuare la conversione della versione di Visual Studio in uso ed effettuare ulteriori modifiche. 2. Aprire il file della soluzione V371Demo situato in C:\Program Files (x86)\HID Global\Lumidigm Release v5.30.xx \VCOM-
3. 4. Integration-Kit\SampleCode\V371Demo\Build. Impostare il progetto V371Demo come progetto StartUp. Impostare come directory di lavoro ..\..\..\bin or C:\Program Files (x86)\HID Global\Lumidigm Release v5.30.xx \
VCOM-Integration-Kit\bin Nota: assicurarsi di compilare come Win32. 5 V371 Panoramica demo Il demo di HID Global Lumidigm V371 offre un approfondimento delle funzionalit di registrazione e verifica di HID Global Lumidigm V371 utilizzando le smart card MIFARE Classic 1K e MIFARE Classic 4K. Lapplicazione un programma GUI MFC C++
semplice, sviluppato utilizzando Visual Studio 2005. Lapplicazione utilizza lAPI Lumidigm VCOM per interfacciarsi con il sensore delle impronte digitali (sensoreHID Lumidigm V310 ) e comunica con il lettore di smart card (HID OMNIKEY CardMan 5x21-CL) utilizzando lAPI Microsoft PC SC. hidglobal.com Page 8 INSTALLATION GUIDEAn ASSA ABLOY Group brandThis Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output are fictitious. Specifications are subject to change without notice. 2015 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS SE are trademarks or registered trademarks of HID Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. Lumidigm V-Series V371 Fingerprint Reader PLT-02470 A.0 Lumidigm V-Series V371 Leitor de impresso digital Iseno de responsabilidade: O leitor de impresso digital V371 , conforme vendido, no executa a funcionalidade match-on-card. A funcionalidade match-on-card pode estar protegida por uma ou mais patentes pertencentes a terceiros, incluindo as patentes americanas RE43,333 e RE44,034. O V371 no deve ser usado para executar a funcionalidade match-on-card sem antes determinar se necessria uma licena e obter essa mesma licena, conforme apropriado. 1 Requisitos do sistema O software V371 suporta os seguintes sistemas operacionais:
Microsoft Windows 7/8 (64 bits)*
Microsoft Windows 7/8 (32 bits)*
*O Lumidigm Device Service 5.30.xx deve ser instalado para executar o leitor V371 no PC. O cdigo-fonte de demonstrao do V371 e V371 suporta apenas cartes inteligentes MIFARE Classic 1K e MIFARE Classic 4K com valores de chave MIFARE padro (0xFF 0xFF 0xFF 0xFF 0xFF 0xFF). O cdigo-fonte de demonstrao do V371 pode ser estendido e modificado para suportar tipos de carto inteligente e valores de chave adicionais. Nota: Windows XP no oficialmente suportado nesta verso. No entanto, so fornecidos instaladores do Windows XP de 32 bits para drivers de dispositivo V31x e Lumidigm Device Service. Consulte o Lumidigm Install Guide v5.30.pdf para obter maiores informaes sobre a instalao em Windows XP. 2 Instrues de instalao Verifique se o usurio logado tem privilgios administrativos completos. 1. 2. Certifique-se de que as User Account Control Settings esto definidas para Default Notify me only when programs try to make changes to my computer. Caso contrrio, clique com o boto direito no arquivo executvel de configurao e selecione a opo de executar como administrador. 3. Certifique-se de que voc no tem os seguintes sensores Lumidigm conectados no sistema durante o processo de instalao. V31x, M31x e V371 4. Desinstale qualquer verso anterior do Lumidigm Device Service. Se voc tem a verso 5.10.32, 5.10.33 ou 5.10.34 instalada, desinstale os Lumidigm Device Service Packages v5.10.3x. Nota: NO desinstale o programa Lumidigm Device Service Win 7/8 v5.10.3x . A desinstalao dos pacotes remover este programa automaticamente. Se voc tiver a verso 5.00.17 ou anterior, desinstale o Lumidigm Device Service Win 7/8 vX.XX.XX where XX.XX.XX sua verso. 5. Execute a configurao do LumidigmDeviceServicePackagesSetup_5.30.xx .exe (necessrio para o scanner de impresso digital incorporado no leitor V371). Para baixar o pacote de software mais recente, consulte:
http://www.hidglobal.com/developer-center/lumidigm-developer-center. Selecione a instalao completa. Este instalador far a instalao dos drivers de dispositivo e servio do Windows necessrios para os sensores V31x e M31x. Nota: Se voc desinstalar os LumidigmDeviceServicePackages, os drivers de dispositivo V31x e M31x tambm sero desinstalados. Este instalador suporta somente o Windows 7/8 (32 e 64 bits). 6. 7. Execute o Lumidigm V371 VCOM_32-bit_5.30.xx.exe. Este instalador far a instalao do Lumidigm VCOM Integration Kit juntamente com o cdigo-fonte de demonstrao V371 e a demonstrao compilada do V371. Conecte o leitor de impresso digital HID Global Lumidigm V371 ao PC. Os drivers de dispositivo para o leitor de cartes devem ser carregados automaticamente. Os drivers de dispositivo para o scanner de impresso digital devem ser carregados automaticamente. No Device Manager, o leitor de cartes inteligentes deve agora ser exibido como OMNIKEY 5x21 no grupo de leitores de cartes inteligentes. Se ele no for exibido, clique com o boto direito no dispositivo e selecione Update Driver Software. No Device Manager, o scanner de impresso digital deve agora ser exibido como um Lumidigm V31x Fingerprint Reader no grupo Lumidigm Biometric Sensor. 8. Execute a verso compilada. Consulte o guia do usurio e a Seo 2: Instrues de instalao para obter mais informaes. A verso compilada da demonstrao do V371 est instalada em C:\Program Files (x86)\HID Global\Lumidigm Release v5.30.xx\VCOM-Integration-Kit\bin\install\V371Demo.exe. Nota: Isso pode ser executado a partir do menu Start > All Programs > HID Global > Lumidigm Release v5.30.xx >
VCOM Integration Kit 32-bit > V371 Demo. hidglobal.com Page 9 INSTALLATION GUIDEAn ASSA ABLOY Group brandThis Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output are fictitious. Specifications are subject to change without notice. 2015 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS SE are trademarks or registered trademarks of HID Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. Lumidigm V-Series V371 Fingerprint Reader PLT-02470 A.0 9. Crie o cdigo-fonte do V371. Consulte a Seo 4; Criar o cdigo-fonte de demonstrao do V371. Nota: Quando um carto inteligente inserido no slot do leitor de cartes do V371, a deteco de Plug and Play de carto inteligente pode no funcionar conforme esperado. Voc pode receber uma mensagem do Windows informando que o software de driver no foi instalado corretamente. O carto inteligente no funcionar conforme esperado nesta situao mesmo com esta mensagem. Se esta mensagem precisar ser suprimida, siga estas instrues para desativar o Plug and Play de carto inteligente na poltica de grupo local. Certifique-se de que esta a linha de procedimento correta para sua implantao. Da Microsoft: http://technet.microsoft.com/en-us/library/dd979547%28v=ws.10%29.aspx Cada vez que um carto inteligente inserido no computador, o Windows solicita que seja baixado e instalado o driver de carto inteligente, caso ainda no esteja disponvel no computador. Pode ocorrer um erro de Plug and Play quando inserir um carto inteligente que no de Plug and Play no computador. Isso no significa, necessariamente, que existe um problema no carto inteligente. Se sua implantao usa somente solues de carto inteligente que no de Plug and Play, o Plug and Play de carto inteligente pode ser desabilitado por um administrador local em um computador cliente. A desativao do Plug and Play de carto inteligente previne o download por parte de drivers de carto inteligente, tambm conhecidos como minidrivers de carto inteligente, e previne avisos de Plug and Play desse tipo. 3 Para desativar o Plug and Play de carto inteligente na poltica de grupo local Em um computador cliente, clique em Start. 1. 2. Digite gpedit.msc na caixa de pesquisa de programas e arquivos e pressione Enter. 3. Na rvore de console em Computer Configuration, clique em Administrative Templates. 4. No painel de detalhes, clique duas vezes em Windows Components. 5. Clique duas vezes em Smart Card. 6. Clique com o boto direito em Turn on Smart Card Plug and Play service. 7. 8. Clique em Disabled. 9. Clique em OK. 10. Reinicie o sistema para que as alteraes produzam efeito (a reinicializao pode ser necessria). Clique em Edit. Para implantaes de empresas, o Plug and Play de carto inteligente pode ser desabilitado por meio da implantao de uma poltica de grupo. Para obter informaes sobre modelos administrativos, consulte a viso geral de modelos administrativos para GPMC (http://go.microsoft.com/fwlink/?LinkId=152390). 4 Criar o cdigo-fonte de demonstrao do V371 1. Os arquivos de projetos e solues so do Visual Studio 2005. Pode ser necessrio converter para sua verso do Visual Studio e fazer alteraes adicionais para que o cdigo-fonte funcione. 2. Abra o arquivo de soluo V371Demo localizado em C:\Program Files (x86)\HID Global\Lumidigm Release v5.30.xx \
VCOM-Integration-Kit\SampleCode\V371Demo\Build. 3. Defina o projeto V371Demo como um projeto de inicializao. 4. Defina o diretrio de trabalho para ..\..\..\bin or C:\Program Files (x86)\HID Global\Lumidigm Release v5.30.xx \VCOM-
Integration-Kit\bin Nota: Certifique-se de que cria como Win32. 5 V371 Viso geral de demonstrao A demonstrao do HID Global Lumidigm V371 permite conhecer melhor as capacidades de verificao e registro do HID Global Lumidigm V371 usando cartes inteligentes MIFARE Classic 1K e MIFARE Classic 4K. O aplicativo um programa GUI MFC C++
simples, desenvolvido usando o Visual Studio 2005. O aplicativo utiliza a API Lumidigm VCOM como interface com o sensor de impresso digital (sensorHID Lumidigm V310) e comunica com o leitor de cartes inteligentes (HID OMNIKEY CardMan 5x21-CL) usando a API Microsoft PC/SC. hidglobal.com Page 10 INSTALLATION GUIDEAn ASSA ABLOY Group brandThis Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output are fictitious. Specifications are subject to change without notice. 2015 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS SE are trademarks or registered trademarks of HID Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. Lumidigm V-Series V371 Fingerprint Reader PLT-02470 A.0 Lumidigm V-Series V371 Lector de huellas digitales Declinacin de responsabilidades El V371 lector de huellas digitales no realiza la funcin match-on-card tal como se vende. La funcin match-on-card puede estar cubierta por una o ms patentes de terceros, incluyendo patentes de los EE.UU. RE43,333 y RE44,034. No debe usarse el V371 para realizar la funcin match-on-card sin antes determinar si se requiere una licencia y, en su caso, obtener tal licencia. 1 Requerimientos de sistema El software de V371 es compatible con los sistemas operativos siguientes:
Microsoft Windows 7/8 (64 bits)*
Microsoft Windows 7/8 (32 bits)*
*Debe instalarse Lumidigm Device Service 5.30.xx para ejecutar el lector V371 en la PC. El V371 Demo y el cdigo fuente del V371 Demo solo son compatibles con tarjetas inteligentes MIFARE Classic 1K y MIFARE Classic 4K con MIFARE valores clave predeterminados (0xFF 0xFF 0xFF 0xFF 0xFF 0xFF). Puede extenderse y modificarse el cdigo fuente del V371 Demo para hacerlo compatible con tipos de tarjetas inteligentes y valores clave adicionales. Nota: Oficialmente, Windows XP no es compatible con esta versin. Sin embargo, se incluyen instaladores de Lumidigm Device Service para Windows XP de 32 bits y los controladores del dispositivoV31x. Consulte el Lumidigm Install Guide v5.30.pdf para obtener ms informacin acerca de la instalacin en Windows XP. 2 Instrucciones de instalacin Cercirese de que el usuario con el que se inici la sesin tiene derechos de administracin completos. 1. 2. Cercirese de que la Configuracin de control de cuentas de usuarios est establecida como Predeterminada: notificarme solo cuando los programas intentan realizar cambios en mi PC. Si no, haga clic derecho en los archivos exe y seleccione ejecutar como administrador. 3. Cercirese de que los sensores Lumidigm siguientes no se encuentran conectados al sistema durante el proceso de instalacin. V31x, M31x y V371 4. Desinstale todas las versiones anteriores de Lumidigm Device Service. Si tiene instalada la versin 5.10.32, 5.10.33 o 5.10.34, desinstale el Lumidigm Device Service Packages v5.10.3x. Nota: NO desinstale el programa Lumidigm Device Service Win 7/8 v5.10.3x . Desinstalar los paquetes eliminar este programa automticamente. Si se encuentra en la versin 5.00.17 o anterior, desinstale el Lumidigm Device Service Win 7/8 vX.XX.XX where XX.XX.XX es su versin. 5. Ejecute el instalador de LumidigmDeviceServicePackagesSetup_5.30.xx .exe (necesario para el escner de huellas digitales que est instalado en el lector V371). Para descargar el paquete de software ms reciente, consulte:
http://www.hidglobal.com/developer-center/lumidigm-developer-center. Seleccione Finalizar instalacin. El instalador instalar los controladores de servicio y de dispositivo necesarios para los sensores V31x y M31x. Nota: Si usted desinstala los LumidigmDeviceServicePackages, Tambin se desinstalarn los controladores de dispositivo V31x y M31x. Este instalador su es compatible con Windows 7/8 (32 y 64 bits). 6. 7. Ejecute el V371 VCOM_32-bit_5.30.xx.exe Lumidigm. Este instalador instalar el Kit de integracin Lumidigm VCOM junto con el V371 cdigo fuente de Demo y el V371 Demo compilado. Conecte el HID Global Lumidigm V371 Lector de huellas digitales a la PC. Los controladores de dispositivo del lector de tarjetas deben cargarse automticamente Los controladores de dispositivo del escner de huellas digitales deben cargarse automticamente En el Administrador de dispositivos, el lector de tarjetas inteligentes debe mostrarse ahora como OMNIKEY 5x21 en el grupo de lectores de tarjetas inteligentes. Si no se muestra, haga clic derecho en el dispositivo y seleccione Actualizar software controlador. En el Administrador de dispositivos, el escner de huellas digitales debe mostrarse como Lumidigm V31x Fingerprint Reader en el grupo de Sensores biomtricos Lumidigm. 8. Ejecute la versin compilada. Consulte la Gua del usuario y la Seccin 2: Instrucciones de instalacin para obtener ms instalacin. La versin compilada del demo V371 se encuentra instalada en C:\Program Files (x86)\HID Global\Lumidigm Release v5.30.xx\VCOM-Integration-Kit\bin\install\V371Demo.exe. Nota: Puede ejecutarse desde el Start men > All Programs > HID Global > Lumidigm Release v5.30.xx > VCOM Integration Kit 32-bit > V371 Demo. hidglobal.com Page 11 INSTALLATION GUIDEAn ASSA ABLOY Group brandThis Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output are fictitious. Specifications are subject to change without notice. 2015 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS SE are trademarks or registered trademarks of HID Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. Lumidigm V-Series V371 Fingerprint Reader PLT-02470 A.0 9. Genere el cdigo fuente de V371. Consulte la Seccin 4: Genere el cdigo fuente de V371 Demo. Nota: Cuando se inserta una tarjeta inteligente en la ranura lectora de tarjetas del V371, la deteccin plug and play de tarjetas inteligentes puede no funcionar como se espera. Puede que reciba un mensaje de Windows que dice que el software controlador no se instal correctamente. La tarjeta inteligente funcionar correctamente en esta situacin (a pesar de este mensaje). Si necesita suprimir el mensaje, siga estas instrucciones para desactivar el plug and play de tarjetas inteligentes en pliza colectiva local. Cercirese de que esta es la mejor lnea de accin para su implementacin. Desde Microsoft: http://technet.microsoft.com/en-us/library/dd979547%28v=ws.10%29.aspx Cada vez que se inserta una tarjeta inteligente en la computadora, Windows intenta descargar e instalar el controlador de tarjetas inteligentes si este no se encuentra disponible en la PC. Puede que vea un error de plug and play cuando inserta una tarjeta inteligente que no cuenta con esa caracterstica en la PC. Esto no quiere decir necesariamente que exista un problema con la tarjeta inteligente. Si su implementacin solo utiliza soluciones de tarjetas inteligentes que no son plug and play, un administrador local puede deshabilitar esta funcin en una computadora de cliente. Deshabilitar el plug and play de tarjetas inteligentes evita que se descarguen los controladores de tarjetas inteligentes, tambin conocidos como minicontroladores de tarjetas inteligentes, y tambin evitar que se muestren las instrucciones de plug and play de tarjetas inteligentes. 3 Desactivacin de plug and play de tarjetas inteligentes en pliza colectiva local En una computadora de cliente, haga clic en Iniciar Introduzca gpedit.msc en la casilla de bsqueda de programas y archivos y presione Introducir. En el rbol de consola de Configuracin de PC, haga clic en Plantillas administrativas. 1. 2. 3. 4. En el recuadro de detalles, haga doble clic en Componentes de Windows. 5. Haga doble clic en Tarjeta inteligente. 6. Haga clic derecho en Activar plug and play de tarjetas inteligentes. 7. Haga clic en Editar. 8. Haga clic en Deshabilitado. 9. Haga clic en Aceptar. 10. Reinicio del sistema para que los cambios tengan efecto (el reinicio puede ser necesario) En las implementaciones empresariales, el plug and play de tarjetas inteligentes puede deshabilitarse al implementar una pliza colectiva. Para obtener informacin acerca de las plantillas administrativas, consulte el Resumen de plantillas administrativas de GPMC (http://go.microsoft.com/fwlink/?LinkId=152390). 4 Generacin del cdigo fuente de V371 Demo 1. Los archivos de solucin y de proyecto son Visual Studio 2005. Puede que sea necesario convertirlos a su versin de Visual Studio y hacer cambios adicionales para que el cdigo fuente funcione. 2. Abra el archivo de solucin V371Demo ubicado en C:\Program Files (x86)\HID Global\Lumidigm Release v5.30.xx \
VCOM-Integration-Kit\SampleCode\V371Demo\Build. Establezca el proyecto V371Demo como proyecto de inicio. 3. 4. Establezca el directorio de trabajo a ..\..\..\bin or C:\Program Files (x86)\HID Global\Lumidigm Release v5.30.xx \
VCOM-Integration-Kit\bin Nota: Cercirese de compilar como Win32. 5 V371 Resumen de demo El Demo HID Global Lumidigm V371 brinda el conocimiento de la capacidad de registro y verificacin del HID Global Lumidigm V371 usando tarjetas inteligentes MIFARE Classic 1K y MIFARE Classic 4K. La aplicacin es un programa MFC C++ GUI sencillo desarrollado utilizando Visual Studio 2005. La aplicacin utiliza el Lumidigm VCOMAPI como interfaz para conectarse al sensor de huellas digitales (sensorHID Lumidigm V310) y se comunica con el lector de tarjetas inteligentes (HID OMNIKEY CardMan 5x21-CL) mediante Microsoft PC SC API. hidglobal.com Page 12 INSTALLATION GUIDEAn ASSA ABLOY Group brandThis Installation Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output are fictitious. Specifications are subject to change without notice. 2015 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID logo, and iCLASS SE are trademarks or registered trademarks of HID Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. Lumidigm V-Series V371 Fingerprint Reader PLT-02470 A.0
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-09-02 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2015-09-02
|
||||
1 | Applicant's complete, legal business name |
HID Global Corporation
|
||||
1 | FCC Registration Number (FRN) |
0005004122
|
||||
1 | Physical Address |
611 Center Ridge Dr.
|
||||
1 |
Austin, TX
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@siemic.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
JQ6
|
||||
1 | Equipment Product Code |
V371
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
R**** C******
|
||||
1 | Title |
Compliance Engineering Manager
|
||||
1 | Telephone Number |
303-4********
|
||||
1 | Fax Number |
303-4********
|
||||
1 |
r******@hidglobal.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Lumidigm V-Series V371 Fingerprint Reader | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Bureau Veritas Consumer Products Services, Inc.
|
||||
1 | Name |
L******** B********
|
||||
1 | Telephone Number |
408-5********
|
||||
1 | Fax Number |
408 5********
|
||||
1 |
l******@siemic.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 13.56000000 | 13.56000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC