3121-906, Rev B.6 OMNIKEY Smart Card Readers Installation Guide eBase Models 1021, 3021, 3121, 4040, 4121, 4321, 5021, 5022, 5023, 5025, 5027, 5121, 5125, 5127, 5127CK Mini, 5321, 5325, 5326, 5421, 5422, 5427, 6121, 6221, 6321 Drivers and Manuals: www.hidglobal.com/omnikey Asia Pacific 19/F 625 Kings Road North Point, Island East Hong Kong Americas and Corporate 611 Center Ridge Drive Austin, TX 78753 USA Europe, Middle East and Africa Phoenix Road Haverhill, Suffolk CB9 7AE England www.hidglobal.com/support OMNIKEY Smart Card Reader Installation Guide Introduction This guide describes physical behavior and conformities of the OMNIKEY Smart Card Readers. 1021 USB - Desktop smart card reader in a small form factor for desktop and mobile usage. 3021 USB - High-performance smart card reader, with a USB interface and small form factor for desktop and mobile usage. 3121 USB - High-performance smart card reader for desktop use with multiple standing base options in a robust housing. 4040 Mobile PCMCIA - High-performance smart card reader for mobile use in laptops and PDAs with PCMCIA interface. 4121 CL - Mobile ExpressCard 34mm - Contactless Reader with ExpressCard interface for Laptops and mobile devices that reads/writes to 13.56 MHz smart cards. 4321 Mobile ExpressCard 54 - High-performance smart card reader for mobile use in laptops and mobile devices with the ExpressCard interface. 5125 / 5325 USB Prox - Dual interface PC-linked reader that reads contactless (125kHz) HID Prox cards and reads/writes virtually any contact smart card. 5022 CL/ 5121 / 5321 / 5421 / 5422 USB - Dual interface PC-linked reader that reads/writes to 13.56 MHz contactless cards and v irtually any contact sm art card. 5127 / 5427 CK/ 5427 UE USB - Contactless 13.56MHz/125kHz reader with CCID/Keyboard wedge interface. 5021 / 5022 / 5023 / 5027 / 5321 CL USB - Contactless Reader with USB interface for desktop use that reads/writes to 13.56 MHz smart cards. 5023 USB - Contactless Reader with USB interface for desktop use that reads/writes to 13.56 MHz smart cards. With iCLASS and Seos support. 5027 USB - Contactless Reader with USB interface for desktop use that reads/writes to 13.56 MHz smart cards. With iCLASS and Seos support. 5025 CL USB - Contactless Reader with USB CCID-compliant interface for desktop use that reads contactless (125 kHz) Prox cards. With iCLASS/Seos support and Keyboard wedge. 5321 CL SAM USB - Dual interface PC-linked reader that reads/writes to 13.56 MHz contactless cards and virtually any SIM-sized contact smart card. 5326 DFR USB - Contactless Dual Frequency (13.56MHz/125kHz) Reader with CCID interface. 6121 Mobile USB - Dongle-sized smart card reader for SIM-sized smart cards, especially well suited for use with mobile devices. 6221 USB - Dongle-sized reader for SIM-sized smart cards and Micro-SD cards, especially well suited for use with mobile devices. 6321 Mobile USB - Dongle-sized Dual interface PC linked reader that reads/writes to 13.56 MHz contactless smart card and virtually any SIM-sized contact smart card. Parts Smart Card Reader Installation Guide Find drivers, reader documentation supporting various operating systems at:
www.hidglobal.com/omnikey See the application note for card loading and handling instructions at:
www.hidglobal.com/omnikey 2 3120-906 B.6. Installation Guide OMNIKEY Smart Card Reader Specifications and Installation For further information, contact HID support: www.hidglobal.com/support. For driver setup, consult the OMNIKEY Smart Card User Guide. CAUTION: Install the drivers prior to attaching the OMNIKEY reader with the computer. ATTENTON: Vous devez installer le driver avant de connecter le lecteur OMNIKEY lordinateur. USB Connected Reader Specifications Operating Temperature 32 to 131 F/0 to 55 C PC Connector Cable 59.1 in/150 cm - Models 1021, 3021, 3121, 5022, 5028, 5027, 5422 78.7 in/200 cm - Models 5021, 5025, 5421, 5427 CK 70.9 in/180 cm - Other Models Mean Time Between Failures (MTBF) 500,000 Hours Host Interface USB 2.0 CCID (USB 1.1 Com patible) Host Data Transmission Speed 12 Mbps (USB 2.0 Full Speed) Power Supply Bus Powered USB Connected Reader Installation 1. Connect the reader with computer; plug the USB connector into your computers USB port. 2. When the reader is operational, the LED illuminates. 3. For contactless operation, hold the card next to the reader logo. For contact smart cards, insert the card into the reader with contacts facing up. 4. When the reader is exchanging data with a card (reading/writing), the LED blinks. PCMCIA and ExpressCard Reader Specifications Operating Temperature Mean Time Between Failures (MTBF) 4321 4121 4040 32 to 131 F / 0 to 55 C 500,000 Hours Host Interface Express Card 54mm Express Card 34mm PCMCIA Host Data Transmission Speed Power Supply 12 Mbps Bus Powered 16 Mbps PCMCIA PCMCIA and ExpressCard Reader Installation 1. 2. Insert the reader into the compatible interface slot of your Notebook or mobile device. If the reader is operational, observe the reader in your operating systems Device Manager. 3. For contactless operation, hold the card next to the logo on the reader. For contact smart cards, insert the card into the reader with contacts facing up. 3120-906 B.6 3 OMNIKEY Smart Card Reader Installation Guide Regulatory CAUTION: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. ATTENTION: Tout changement ou modification de cet appareil sans approbation explicite du manufacturer vous enlve les droits dusage de cet quipement. FCC (All Readers) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Product Radio Certifications The OMNIKEY 5022 CL and 5127CK MINI Module were tested under the FCC rules and Industry Canada rules for a Modular Approval and therefore the following shall apply: (reference below FCC/IC IDs) Provided that the Antenna and tuning network have not been changed in any way, the Final Product label may contain the HIID Global FCC ID. Provided no other radio devices exist within the final assembly. The end integrator may use these IDs, as long at the original HID Global Label is visible. FCC ID: JQ6-OK5022CL or IC ID: 2236B-OK5022CL FCC ID: JQ6-OK5127CKMINI or IC ID: 2236B-OK5127CKMINI The End User/Manufacturer, will not need to repeat the intentional emissions testing (actual radio certification), however the un-intentional emissions testing will need to meet the FCC and IC requirements with the module installed into the final assembly or product. This also applies to CE Marking as defined by the R&TTE Directive. However, in many cases, the module may need to be retuned, due to the effects of the product enclosure and assemblies within this enclosure, and the de-tuning affect that this may have on the radio circuitry. In this case and if other radios exist, Class 2 Permissive Change is required. In the event that the HID OEM modules Kit is modified in any way, the radio transmitter operating at either 125 kHz, 13.56 MHz and Bluetooth, when the module is integrated into the OEMs final product, Radio Certification is required for the final product. Obtain FCC Certification by submitting the final product to a Telecommunications Certified Body (TCB) laboratory that performs the testing and issue the FCC Grant. Standard: Part 15, Subpart C. Often the same TCB tests to Canada requirements and grants certification as a Certification Body (CB). Standard: RSS-210, RSS-GEN and RSS-310, where applicable. The same laboratory may also be an EU Communications Assessment Body (CAB) that is accredited to test to R&TTE Directive requirements for CE Marking. Applicable standards:
EN 300 330, EN 301 489-3, EN 50130-4, and IEC60950. A laboratory that is a CAB testing to R&TTE Directive requirements will also be testing to Australia and New Zealand requirements because of a common test standard. Standard:
AS/NZS 4268. Asian country certifications are obtained on an individual country basis. OEM Final Product US Dept. of Commerce Bureau of Industry and Security (BIS) approval is required for USA based companies who export and re-export products using encryption. Regulatory Compliance Assistance - HID Global provides technical assistance and laboratory recommendations, as required. 4 3120-906 B.6. Installation Guide OMNIKEY Smart Card Reader CAUTION: Any changes or modifications to this devise not explicitly approved by the manufacturer could void your authority to operate this equipment. Canada Radio Certification (All Readers) This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR dIndustrie Canada applicable aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suiv antes: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible den com promettre le fonctionnement. CE Marking (All Readers) HID Global hereby declares that these proximity readers are in compliance with the essential requirements and other relevant provisions of Directive 2006/95/EC. Por el presente, HID Global declara que estos lectores de proximidad cumplen con los requisitos esenciales y otras disposiciones relevantes de la Directiva 2006/95/EC. HID Global dclare par la prsente que ces lecteurs proxim it sont conformes aux exigences essentielles et aux autres stipulations pertinentes de la Directive 2006/95/EC. A HID Global, por meio deste, declara que estes leitores de proxim idade esto em conform idade com as exigncias essenciais e outras condies da diretiva 2006/95/EC. HID Global besttigt hiermit, dass die Leser die wesentlichen Anforderungen und anderen relevanten Bestimmungen der Richtlinie 2006/95/EC erfllen. HID Global dichiara che i lettori di prossimit sono conformi ai requisiti essenziali e ad altre misure rilevanti come previsto dalla Direttiva europea 2006/95/EC. Download the R&TTE Declaration of Conformity (DoC) at:http://www.hidglobal.com/certifications Brazil (Readers 5022, 5023 and 5027) Este equipamento opera em carter secundrio, isto , no te m direito a proteo contra interferncia prejudicial, mesmo de estaes do mes mo tipo, e no pode causar interferncia a sistemas operando em carter pri mrio Chile (Readers 5022 and 5023) China (Readers 1021, 5022, 5427 and 5027) Hong Kong (Readers 5022, 5023 and 5027) India (Readers 5022 and 5023) Japan MIC (Reader 4121 and 5027) RFID ti 3120-906 B.6 5 OMNIKEY Smart Card Reader Installation Guide Korean KC (Readers 1021, 3121, 4040, 4321, 5021, 5022, 5027, 5325, 5326, 5421, 5427, 6121, 6221,6321) RFID:13.56 MHz RFID:13.56 MHz RFID: 10m 24.19mv DC 5 A1D X-tal AM Mexico (Readers 5022, 5023 and 5027) Singapore (Reader 5427 CK) Taiwan (Readers 5321, 5421 and 5027) According to Administrative Regulations on Low Power Radio Waves Radiated Devices Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices. 6 3120-906 B.6.