INSTALLATION GUIDE iCLASS SE Reader 13.56 MHz / 2.4 GHz Contactless R10 www.hidglobal.com/PLT-03681 Scan the QR code or visit the link to see the multi-language electronic version of this document. Lisez le code QR ou suivez le lien pour consulter la version franaise de ce document. Escanee el cdigo QR o visite el vnculo para consultar la versin en Espaol de este documento. Scannen Sie den QR-Code oder ffnen Sie den Link fr die deutsche Version dieses Dokuments. Faa a leitura do cdigo QR ou acesse o link da verso em portugus deste documento. Supplied parts PLT-03314, Rev. A.1 Scansiona il codice QR o visita il link della versione Italiana di questo documento. QR-
,
. QR QR QR
. iCLASS SE R10 Reader (1) Installation Guide (1) 0.138-20 x 1.5" screws (2) for installing the reader directly to a wall (no junction box) 0.138-32 x 0.375" screws (3) for Imperial
(US) junction box installation (2) and attaching the reader to the back plate (1) M3.5 x 12mm screws (2) for Metric (EU etc) junction box installation 0.138-32 x 0.375" security screw (1) alternative security screw for attaching the reader to the back plate Recommended parts (not supplied) Cable, 5-9 conductor (Wiegand or Clock-and-Data) Certified DC power supply Metal or plastic junction box Security tool HID 04-0001-03 (for anti-
tamper screw) Drill with various bits for mounting hardware Mounting hardware Reader spacer (PN: 6132AKB) when mounting on or near metal or metal junction boxes - see How to Order Guide IP65 Mounting gasket (PN: IP65GSKT-R10, 10 pcs per kit), recommended for outdoor installation Junction box 2 Wire the reader PIGTAIL DESCRIPTION Yellow Orange Black Red Drain Violet Violet/White White Green Beeper Input LED Input (GRN) Ground (RTN)
+VDC Unused
*Tamper #1
*Tamper #2 Wiegand Data 1 Wiegand Data 0
* Tamper Output. When activated or when the reader is unpowered, the circuit between Tamper#1 and Tamper#2 reader control lines will open. Note: Wiring the reader incorrectly may permanently damage the reader. 9"
(0.23m) 3 Secure the reader to the backplate 1 2 2018 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, the HID Brick logo, the Chain Design, HID Reader Manager, HID Mobile Access, and iCLASS SE are trademarks or registered trademarks of HID Global, ASSA ABLOY AB, or its affiliate(s) in the US and other countries and may not be used without permission. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners. Optional Features Optical Tamper enabled by default Once activated, when the mounting plate is removed, the optical tamper will open the circuit between Tamper#1 and Tamper#2 reader control lines. Tamper#1 and Tamper#2 control lines are interchangeable. Either of these lines can be connected with the reader ground line to reduce the number of cable cores required in the reader cable. The tamper control lines can operate within 0-12 VDC and 0-100 mA. Configuration The reader can be modified to meet the specific requirements of an installation. Configuration options include; audio visual, and CSN outputs. See the HID Reader Manager solution on www.hidglobal.com for further details. 1 Mount the backplate 3 4 1. Align the top of the reader with the top of the backplate. 2. Hook the top of the reader on the top of the backplate. 3. Align the bottom of reader with the bottom of the backplate. 4. Secure the reader to the backplate using one of the supplied screws:
Security/non-tamper screw: 0.138-32 x 0.375" screw (supplied) Non-security/standard screw: 0.138-32 x 0.375" screw (supplied) ATTENTION Observe precautions for handling ELECTROSTATIC SENSITIVE DEVICES 4 Power and test the reader Mounting directly to the wall/
mullion mount Mounting to a junction box Junction box (not supplied) Mud ring required to mount on single gang junction box (not supplied) 1 2 1 2 Use supplied 0.138-20 x 1.5" screws Optional gasket For Imperial (US):
Use supplied 0.138-32 x 0.375" screws For Metric (EU etc):
Use supplied M3.5 x 12mm screws hidglobal.com Turn on the power. The reader should beep and the light bar should flash. Test the reader with a card. The reader should beep and the light bar should flash. An ASSA ABLOY Group brand Specifications INPUT VOLTAGE (VDC) CURRENT STANDBY AVG1 MAX AVG2 PEAK3 OPERATING TEMPERATURE CABLE LENGTH4 12 VDC 46 mA 60 mA 250 mA
-30 F to 150 F
(-35 C to 66 C) Communication Lines (Wiegand) 22 AWG: 500 ft (152 m) REGULATORY REF NUMBER FREQUENCY FCC & IC IDS 1Standby AVG - RMS current draw without a card in the RF field. 2Maximum AVG - RMS current draw during continuous card reads. Not evaluated by UL. 3Peak - highest instantaneous current draw during RF communication. 4 Wiegand Cable Lengths: 500 ft (152 m) 22 AWG @ STANDBY AVG 46 mA, MAX AVG 62.5 mA, PEAK 250 mA FCC-ID: JQ6-iCLASSR10F, IC-ID: 2236B-ICLASSR10F BLE: 2.4 - 2.480 GHz, HF: 13.56 MHz R10FKNN Regulatory UL Connect only to a Listed Access Control / Burglary power-limited power supply. These readers are intended to be used with listed (UL294) control equipment. Suitable for outdoor use. Only Wiegand and Bluetooth communications have been evaluated by UL. iCLASS SE readers are compatible with HID Mobile Access version 3.0.0 and later using mobile devices with BLE version 4.2 and later listed at:
https://www.hidglobal.com/mobile-access-compatible-devices. Install in accordance with NFPA70 (NEC) Local Codes, and authorities having jurisdiction. Follow all National and Local Codes. UL 294 Performance Levels Model #
R10F Access Control Line Security Level Level I Destructive Attack Level Endurance Level Stand-by Power Level Conditions Level I Level IV Level I FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Canada Radio Certification This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. CE Marking HID Global hereby declares that these proximity readers are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Por el presente, HID Global declara que estos lectores de proximidad cumplen con los requisitos esenciales y otras disposiciones relevantes de la Directiva 2014/53/EU. HID Global dclare par la prsente que ces lecteurs proximit sont conformes aux exigences essentielles et aux autres stipulations pertinentes de la Directive 2014/53/EU. A HID Global, por meio deste, declara que estes leitores de proximidade esto em conformidade com as exigncias essenciais e outras condies da diretiva 2014/53/EU. HID Global besttigt hiermit, dass die Leser die wesentlichen Anforderungen und anderen relevanten Bestimmungen der Richtlinie 2014/53/EU erfllen. HID Global dichiara che i lettori di prossimit sono conformi ai requisiti essenziali e ad altre misure rilevanti come previsto dalla Direttiva europea 2014/53/EU. Download copies of the Radio Equipment Directive (RED) Declaration of Conformity (DoC) at: http://www. hidglobal.com/certifications Taiwan According to Administrative Regulations on Low Power Radio Waves Radiated Devices Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency device. The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices. Korean KCC R10F RFID: ASK, NFC: GFSK RFID: 10m 47.544mv DC 12.0V A1D X-tal RFID:13.56 MHz, BLE 2.4 -2.48GHz RFID:13.56 MHz, BLE 2.4 -2.48GHz Russia EAC e-mail Japan MIC
(AC-) RFID Japan Giteki for BLE 140573, , ., , . .
+7 495 223 6008 local.declarant@gmail.com xxx-xxxxxx R Israel
.
, .
, . Brazil Compliance Statement Este produto est homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resoluo 242/2000, e atende aos requisitos tcnicos aplicados. Para maiores informaes, consulte o site da ANATEL - www.anatel.gov.br This product is homologated at ANATEL according to procedure regulated by Resolution 242/2000, and it complies with the applicable technical requirements. For more information, consult ANATEL website -
www.anatel.gov.br RF Warning Statement Per Article 6 of Resolution 506, equipment of restricted radiation must carry the following statement in a visible location:
Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. This equipment operates in secondary character, meaning it does not have the right of protection against harmful interference, even against those the same character, and it cannot cause any interference to systems operating in the primary character. HHHHH-AA-FFFFF UAE Singapore Indonesia TRA REGISTERED NO:
nnnnnnn DEALER NO:
DA37204/14 Complies with IDA Standards DA123456*
(Certificate Number)
(PLG ID Number) South Africa Australia and New Zealand TA XXXX-YYYY APPROVED E4662 hidglobal.com PLT-03314, Rev. A.1 HID Global15Equipment8T2 9ACC Control READERGeneral SignalingEquipmentE4662ABCD12345678BrazilCondomnio Business CenterAv. Ermano Marchetti, 1435Galpo A2 - CEP 05038-001Lapa - So Paulo / SPBrazilPhone: +55 11 5514-7100Asia Pacific19/F 625 King's RoadNorth Point, Island EastHong KongSupport: 852-3160-9833Fax: 852-3160-4809Americas & Corporate611 Center Ridge DriveAustin, TX 78758USASupport: 866-607-7339Fax: 949-732-2120Europe, Middle East & AfricaPhoenix RoadHaverhill, Suffolk CB9 7AEUnited KingdomSupport: 44 (0) 1440 711 822Fax: 44 (0) 1440 714 840An ASSA ABLOY Group brand