HID MOD001 Install Guide Overview This BEEKs BLE Module Install Guide covers the basics of the setup and provisioning of equipment with Bluzone cloud account and project. This install guide is intended for technicians. The HID BEEKs Bluetooth Low Energy (BLE) Module supports transmission of data from wired sensors utilizing a variety of protocols, including UART, SPI, and I2C. Additionally, the built-in 12-bit analog-to-digital converter provides support for analog output sensors. The BEEKs BLE Module therefore enables custom solution development for a wide range of applications. When combined with HID Globals end-to-end IoT ecosystem, which includes BluFi BLE-to-WiFi gateways and the Bluzone cloud services, the BLE Module can be centrally managed remotely through the cloud to transfer new messages and firmware updates. The unique design allows BEEKs BLE Module to broadcast reliably, even in densely populated WiFi environments. The BLE radio enables the module to transmit the data from wired analog and digital sensors for a variety of applications. Bluzone allows you to control the transmitting capabilities of the module. System components Terminology 1 2 3 1 BluFi model BluFi-AC00 Bluetooth to WiFi Gateway 2 Bluzone Cloud Fleet Management and Condition Monitoring dashboard. 3 BLE Module model MOD001 Bluetooth Low Energy Module Best practices Maximum of 15 20 beacons per BluFi for best results Maximum 20 30 meters from beacon to BluFi for best results (distance will decrease for increased interference/
blockages). For RTLS applications, the BEEKS Duress Badge signal must be received by at least three BluFis in the vicinity. Network troubleshooting 2.4 GHz WiFi only HTTPS port 443 must be open DHCP required 1 Mbps upload speed required Captive WiFi portals not compatible Compatible certificate formats: .pem, .der Some networks may require adding the BluFi MAC address to an allowlist 1 2 WiFi WiFi Bluetooth Bluetooth 3 1 Bluzone Secure cloud-based SaaS to centrally manage BEEKs via BluFi gateways. Additionally, monitor, store and analyze performance data collected from deployed fleet. 2 BluFi Gateway Receives data from BEEKs over Bluetooth and sends to Bluzone Cloud.`
3 BLE Module Sends data from wired sensors to BluFi. Prerequisites Set up Bluzone account Download Bluzone mobile app Additional installation guides are available and can be found at: https://hid.gl/HID-BluFi-installation PLT-06387, Rev. A.0 1 January 2022 BLE Modules should be mounted with screws to rigid standoffs using the two through-holes on the printed circuit board assembly (PCBA). 1. Module mounting Hole 1 diameter
(2 mm) 23.50 mm HID MOD001 Install Guide Hole 2 diameter
(2 mm) Hole 1 location
(3.62 mm X 10.03 mm) 30.50 mm Hole 2 location
(5.91 mm X 5.90 mm) The modules may be mounted in a custom enclosure or to a surface that is isolated from contact. It is recommended that the module be covered to avoid damage to the board and components. PLT-06387, Rev. A.0 2 January 2022 PoweringTrusted Identities 2. Initial set up 2.1 Account set up 1. Visit bluzone.io and register a new account. Verify your email by clicking on the link emailed to you. HID MOD001 Install Guide 2.2 Project set up 1. Use the drop-down menu in the top right portion of the screen to create a new project. 2. Go to Settings and send a Product Activation request for your use case e.g. RTLS, Status Monitoring or Advanced Condition Monitoring, depending on the SaaS model you have purchased. Your product features will be activated within 24 hours. PLT-06387, Rev. A.0 3 January 2022 PoweringTrusted Identities 2.3 Bluzone mobile app setup 1. Download the Bluzone mobile app from Google Play or the iOS App Store. 2. Login to your account with Bluzone credentials. 2.4 BEEKs BLE Module provisioning 1. Power on the module with a 3.6 - 30 VDC supply voltage and place the module close to a BluFi (dont install on assets yet). HID MOD001 Install Guide 2. For each module, hold the mobile device close to the module and select the device with highest signal strength (swipe down to refresh list). Continue the steps for each BEEKs module. 3. When prompted for a Template, select the template that corresponds to your custom use-case. 4. Assign the module a name that coincides with the asset on which it is installed. PLT-06387, Rev. A.0 4 January 2022 PoweringTrusted Identities HID MOD001 Install Guide 3. BEEKs and BluFi installation 3.1 BluFi installation BluFi should be installed within 100ft (30m) of monitored assets (shorter distances are required for environments with obstructions). BluFi AC:
3.2 BLE Module 1. Place beacons near the desired assets (dont install yet). 2. In Bluzone console, go to BluFi > {BluFi Name} >
Statistics and scroll down to the Scan Map. 3. Verify that each beacon sees at least one BluFi. (-75 dBm or higher is desired). Move any BluFi, if necessary. 3.3 BLE Module installation 1. Connect the wired sensor (for your use-case) to the BLE 2. Power on the BLE Module using 3.6 - 30 VDC power Module. supply. 3.
(Optional) Connect external antenna to the U.FL coaxial connector. 4. BLE Modules should be mounted with screws to rigid standoffs using the two through-holes on the printed circuit board assembly (PCBA). BluFi DC:
BluFi DC BluFi DC Plenum PLT-06387, Rev. A.0 5 January 2022 PoweringTrusted Identities 5. The modules may be mounted in a custom enclosure or to a surface that is isolated from contact. It is recommended that the module be covered to avoid damage to the board and components. HID MOD001 Install Guide PLT-06387, Rev. A.0 6 January 2022 PoweringTrusted Identities HID MOD001 Install Guide Specifications BEEKs BLE Module Model: MOD001 Available configurations MOD001
(Most comprehensive) MOD001-UART MOD001-Badge Description Base model board with components to support generic data input through I2C, SPI, and analog sensors. Board with components to support serial data input via UART connection; raw data advertised in sBeacon packets. Board with components to support use of module in a badge application for location service use-cases Dimensions 30.5mm x 23.5mm 30.5mm x 23.5mm 30.5mm x 23.5mm Frequency Range 2400-2483.5 MHz Number of Channels 40 Modulation GFSK Mode of operation Half-duplex RF output power (max) +5 dBm Data Rate 1 Mbit/s Antenna PCB antenna, antenna gain 0.30 dBi External Antenna (optional) TAOGLAS WCM.01.0111 2.4GHz Button Antenna. Antenna Gain 0.89 dBi Power Supply Input Voltage 3.630 VDC Operating temperature -22 to +140 F (-30 to +60 C) Power consumption -RX 7.5 mA RX Active Mode Power consumption-TX 6.5 mA TX Active Mode Power consumption-sleep 1.6 A (SRAM retention and RTC running) CPU Dual Code: ARM Cortex M3 (32 bit, 48 MHz) main CPU, ARM Cortex M0 (16 bit) sensor controller Flash Memory 128 KB flash (MCU) 512 KB additional flash Type Feature BLE Stack Bluetooth Low Energy 4.2 compliant single mode protocol stack GAP, SM, GATT, ATT, L2CAP and Link layer protocols Peripheral and broadcaster roles Central role Observer and limited master role Fully embedded software architecture. No bifurcation between Host and Controller Link-Layer Packets per connection interval - Configurable up to 12 Connection parameters update Connection channel map update Connection graceful terminate AES128 Encryption request and response Memory
~54 kB stack and application size (Flash non-volatile memory)
~8 kB RAM requirement No memory Isolation between application and protocol stack PLT-06387, Rev. A.0 7 January 2022 PoweringTrusted Identities HID MOD001 Install Guide Type Feature Advertising Reverse RSSI Configurable interval Configurable adaptive advertisement mode for lower power consumption Operating System Bare metal implementation by HID Application supported iBeacon support sBeacon support Eddystone support Fully open and easily configurable for 3rd party Beacon protocol Security Bluzone Cloud-Key-vault managed security Unique internal key per individual Beacon Internal Device ID per individual Beacon (sBV2ID) Internal UNIX time clock / Timer since on (Manufacture) RSA Private/Public with(Bluzone Cloud - key/vault)-Communication from/to Beacon encrypted use RSA PLT-06387, Rev. A.0 8 January 2022 PoweringTrusted Identities 4. Regulatory information SRD Model: MOD001 RF Specifications Standard protocol BLE 4.2 Frequency band 2400-2483.5 MHz No of RF channels 40 RF output power +5 dBm Modulation GFSK Antenna PCB, 0.30 dBi Communication Regulation The following is a list that applies:
US FCC United States Compliance FCC ID: SL6-MOD001 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT: Changes or modifications to this product not authorized by HID, could void the FCC Certification and negate your authority to operate this product. Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This module is certified pursuant to two Part 15 rules sections(15.247). Integrator / End Product The user manual of the end product should include:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Label of the end product:
The host product must be labeled in a visible area with the following Contains FCC ID: SL6-MOD001. The end product shall bear the following 15.19 statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. HID MOD001 Install Guide Canada Compliance 24824-MOD001 This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et
(2) lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20cm de distance entre la source de rayonnement et votre corps OEM integrator is still responsible for testing their end product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions cannot be met
(for example certain laptop configurations or co-location with another transmitter), then the IC authorization is no longer considered valid and the IC number can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate IC authorization. OEM Integrator Notice End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains transmitter module IC: IC: 24824-MOD001. Contient le module dmission IC: IC: 24824-MOD001 The Host Model Number (HMN) must be indicated at any location on the exterior of the end product or product packaging or product literature which shall be available with the end product or online. This device is intended only for OEM integrators under the following conditions:
1. The antenna must be installed such that 20cm is maintained between the antenna and users, and 2. The transmitter module may not be co-located with any other transmitter or antenna. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1. Lantenne doit tre installe de telle sorte quune distance de 20cm est respecte entre lantenne et les utilisateurs, et 2. Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Australia/ New Zealand Compliance This product conforms to Australia and New Zealand Radio Requirements. Japan 217-220435 UK Compliance PLT-06387, Rev. A.0 9 January 2022 PoweringTrusted Identities European Union Compliance Conformite Europenne (European Community) Hereby, HID Global declares that this Radio Equipment SRD Model number MOD001 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: www.hidglobal/certifications This product operates at the following frequencies:
2.4 GHz band with an RF output power of less than +5 dBm e.i.r.p. Czech Spolenost HID Global tmto prohlauje, e toto radiov zazen, slo modelu MOD001, odpovd poadavkm smrnice 2014/53/EU. pln text EU Prohlen o shod je k dispozici na nsledujc internetov adrese: www. hidglobal/certifications Tento vrobek pouv nsledujc frekvence:
frekvenn psmo 2,4 GHz, piem vstupn RF vkon je ni ne +5dBm EIRP Greek
, HID Global M MOD001 O 2014/53/E.
www.hidglobal/certifications
2,4 GHz (RF)
+5dBm e.i.r.p. ( ) Dutch Hierbij verklaart HID Global dat deze radioapparatuur modelnummer MOD001 in overeenstemming is met Richtlijn 2014/53/EU. De volledige tekst van de Europese conformiteitsverklaring is te vinden op de website:
www.hidglobal/certifications Dit product werkt op de volgende frequenties:
2,4 GHz-band met een RF-uitgangsvermogen van minder dan +5 dBm e.i.r.p. Danish HID Global erklrer hermed, at dette radioudstyr modelnummer MOD001 er i overensstemmelse med direktiv 2014/53/EU. Den fulde tekst i EU- overensstemmelseser- klringen kan lses her: www.hidglobal/
certifications Dette produkt fungerer ved flgende frekvenser:
Estonian Kesolevaga kinnitab HID Global, et see raadioseadmestik mudelinumbriga MOD001 on vastavuses direktiiviga 2014/53/EL. Kogu EL-i vastavusdeklaratsiooni tekst on saadaval jrgmisel internetiaadressil: www. hidglobal/certifications See toode ttab jrgmistel sagedustel. 2,4 GHz ribalaiusel raadiosagedusliku vljundvimsusega vhem kui +5 dBm e.i.r.p. Maltese Hawnhekk, HID Global tiddikjara li dan it-Tagmir tar-Radju bin- numru tal-mudell MOD001 huwa konformi mad-Direttiva 2014/53/UE. It-test si tad- dikjarazzjoni ta konformit tal- UE hu disponibbli fdan l- indirizz fuq l-Internet: www.hidglobal/certifications Dan il-prodott jopera fil- frekwenzi li ejjin:
2.4 GHz band bRF output power ta inqas minn +5 dBm e.i.r.p. HID MOD001 Install Guide German Hiermit erklrt HID Global, dass dieses Funkgertmodell Nr. MOD001 der Richtlinie 2014/53/EU entspricht. Der vollstndige Text der EU- Konformittserklrung steht unter der folgenden Internetadresse zur Verfgung: www.hidglobal/certifications Dieses Produkt arbeitet mit den folgenden Frequenzen:
2,4-GHz-Band mit einer HF-Ausgangsleistung von weniger als +5dBm EIRP Finnish HID Global vakuuttaa tten, ett tm radiolaite, mallinumero MOD001, vastaa direktiivi 2014/53/EU. EU-
vaatimustenmukaisuus- vakuutuksen koko teksti on saatavissa seuraavasta Internet-osoitteesta: www.hidglobal/certiifcations Tm tuote toimii seuraavilla taajuuksilla:
2,4 GHz:n kaista, RF- lhtteho alle +5 dBm EIRP Swedish Hrmed intygar HID Global att denna radioutrustning modell nummer MOD001 verensstmmer med direktiv 2014/53/EU. Den fullstndiga texten med intyg om verensstmmelse fr EU finns p fljande internetadress:
www.hidglobal/certifications Den hr produkten fungerar p fljande frekvenser:
2,4 GHz-band med en RF-uteffekt p mindre n +5dBm e.i.r.p. French Par la prsente, HID Global dclare que cet quipement radio Modle MOD001 est conforme la directive 2014/53/UE. Le texte intgral de la dclaration de conformit de lUE est disponible sur le site Internet: www. hidglobal/certifications Ce produit fonctionne aux frquences suivantes:
dans la bande de 2,4 GHz avec une puissance de sortie RF infrieure
+5dBm PIRE Italian Con il presente documento, HID Global dichiara che la presente apparecchiatura radio modello MOD001 conforme alla direttiva 2014/53/
UE. Il testo completo della dichiarazione UE di conformit disponibile su Internet al seguente indirizzo: www.hidglobal/certifications Questo prodotto funziona alle seguenti frequenze:
Banda a 2,4 GHz con potenza di uscita RF inferiore a +5 dBm EIRP Polish Firma HID Global deklaruje niniejszym, e to urzdzenie radiowe, model numer MOD001, spenia wymogi okrelone w Dyrektywie 2014/53/UE. Peny tekst deklaracji zgodnoci UE jest dostpny pod nastpujcym adresem internetowym: www.hidglobal/certifications w pamie 2,4 GHz z rwnowan moc wyjciow RF wypromieniowan izotropowo (EIRP) mniejsz ni +5dBm. Croatian Ovime tvrtka HID Global izjavljuje da je ova radijska oprema model MOD001 u skladu s Direktivom 2014/53/EU. Cjelokupan tekst europske izjave o sukladnosti dostupan je na sljedeoj internetskoj stranici: www.hidglobal/
certifications Ovaj proizvod radi pri sljedeim frekvencijama:
pri frekvenciji od 2,4 GHz s izlaznom RF snagom manjom od +5dBm e.i.r.p Lithuanian iuo deklaruoja, kad is radijo rangos modeHID Global lis, kurio numeris MOD001, atitinka Direktyv 2014/53/EB. Vis ES atitikties deklaracijos tekst galite rasti iuo interneto adresu: www.hidglobal/certifications is gaminys veikia tokiais daniais:
2,4 GHz danio diapazonas, RD ivesties galia yra maesn nei +5 dBm EIRP. 2,4 GHz-bnd med en RF-udgangseffekt p mindre end +5dBm e.i.r.p. Ten produkt dziaa na nastpujcych czstotliwociach:
PLT-06387, Rev. A.0 10 January 2022 PoweringTrusted Identities Slovenian Druba HID Global izjavlja, da je ta radijska oprema, tevilka modela MOD001, v skladu z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu: www.hidglobal/
certifications Ta izdelek deluje pri naslednjih frekvencah:
2,4 GHz z izhodno mojo RF manj kot +5dBm e.i.m.o. (EIRP) Hungarian A HID Global ezton nyilatkozza, hogy ez az MOD001 tpusszm rdiberendezs megfelel a 2014/53/EU irnyelvnek. Az EU megfelelsgi nyilatkozat teljes szvege elrhet a kvetkez internetes cmen: www. hidglobal/certifications A termk a kvetkez frekvencikon zemel:
2,4 GHz-es sv, mely esetben RF kimeneti teljestmnye kevesebb, mint
+5 dBm EIRP Latvian Ar o uzmums HID Global apliecina, ka radioiekrta, modea numurs MOD001, atbilst Direktvas 2014/53/ES prasbm. Pilnu ES atbilstbas deklarcijas tekstu var skatt vietn www.hidglobal/certifications is izstrdjums darbojas ar dm frekvencm:
2,4 GHz josla; radiofrekvences izvades jauda ir mazka par +5 dBm
(ekvivalent izotropiski izstarot jauda). Slovak Spolonos HID Global tmto vyhlasuje, e toto rdiov zariadenie, model MOD001, je v slade so smernicou 2014/53/E. pln znenie vyhlsenia o zhode so smernicami E je k dispozcii na strnke: www.hidglobal/
certifications Toto zariadenie pracuje pri nasledujcich frekvencich:
2,4 GHz psmo s RF vstupnm vkonom nim ako +5dBm EIRP Romanian Prin prezenta, HID Global declar c acest echipament radio numr model MOD001 ste n conformitate cu Directiva 2014/53/UE. Textul complet al declaraiei de conformitate UE poate fi gsit la urmtoarea adresde internet:
www.hidglobal/certifications Acest produs funcioneazla urmtoarele frecvene:
n banda 2,4 GHz cu o putere de ieire RF de mai puin de +5dBm E.I.R.P. Portuguese Por este meio, a HID Global declara que este modelo de equipamento de rdio, nmero MOD001, est em conformidade com a Diretiva 2014/53/UE. O texto completo da declarao de conformidade da UE est disponvel no seguinte endereo da Internet: www.hidglobal/certifications Este produto opera nas frequncias seguintes:
2,4 GHz com uma potncia de sada de RF inferior a +5dBm e.i.r.p. Spanish Por la presente, HID Global declara que este equipo de radio, modelo nmero MOD001 cumple la Directiva 2014/53/EU. El texto completo de la Declaracin de Conformidad CE est disponible en la siguiente direccin de internet: www.hid global/certifications Este producto opera en las siguientes frecuencias:
Banda de frecuencia de 2,4 GHz con una potencia de salida de RF (PIRE) de menos de +5dBm. HID MOD001 Install Guide 2022 HID Global Corporation/ASSA ABLOY AB. All rights reserved. PLT-06387, Rev. A.0 Part of ASSA ABLOY For technical support, please visit: https://support.hidglobal.com PoweringTrusted Identitieshidglobal.com