TOUCH 7 Dual-mode video baby monitor User Guide babysense Touch+1 - 1 Camera babysense Touch+2 - 2 Cameras For any product related question please contact us at:
[email protected] www.babysensemonitors.com Thank you for choosing Babysense Video Monitor from Hisense Ltd. Safety Instructions 2 Warnings and Safety Instructions Follow these safety precautions to prevent fire, injury or damage to the product. Read and keep instructions: It is very important that you read all the safety and operating instructions before the Babysense Video Monitor is operated. Please retain your purchase receipt as you will need to produce it if warranty service is required. WARNINGS STRANGULATION HAZARD: Children can become entangled in cords. Make sure the Baby Unit, Parent Unit and mains adaptor cables are kept out of reach of your baby and other young children at all times, at least 6 feet away. CHOKING HAZARD: This product contains small parts which may cause choking. Exercise care when unpacking and assembling the product and keep the small parts away from children. RISK OF SUFFOCATION: Keep all packaging materials and protective foils out of reach of children. DANGER FROM POWER CORDS: To avoid possible danger from power cords, the cords should be secured and never be hung on or near the crib. Never place the Baby unit or Parent unit inside your baby's crib, bed or playpen. DO NOT HANDLE ROUGHLY, DROP OR THROW: Babysense video monitor is a high-quality electronic device which must be handled with care. This product is designed for INDOOR USE ONLY. WATER AND MOISTURE: The product should not be exposed to rain, moisture, or splashing. Never use or place the product in or near moisture or water. Safety Instructions 3 THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION: Your video monitor is designed to be an aid and should not be used as a substitute for responsible and proper adult supervision of a child. POWER SOURCE: This product should only be used with the AC power adapters supplied by the manufacturer, as included in this package. VENTILATION: This product should not be used on a bed, sofa, rug or similar surface that may block the ventilation or speaker openings, or be placed in an enclosed area, such as a bookcase or drawer that may impede air flow. Never cover the product with clothes, towels, blankets or any other item. THIS PRODUCT IS NOT A TOY: It should be kept out of children's reach. KEEP AWAY FROM SOURCES OF HEAT: This unit should not be exposed to direct heat sources such as a candle, stove, radiator, heat register or other appliance that emit heat. The unit should not be left in direct sunlight. BATTERY: Before you use the product, we recommend you fully charge the battery of the Parent Unit, so that it continues to work if you disconnect it from the power supply to carry it to another location. INSTALLATION LOCATION: The installation location plays an important role in ensuring proper operation. Therefore, maintain a distance of at least 5 feet from other
cause interference. If this occurs, move the baby and parent units to another location. RANGE: Range of all baby monitors is always measured in an open space. The actual range may be shortened due to environmental obstacles (such as concrete walls). DAMAGE REQUIRING SERVICE: This product should be serviced by qualified personnel only. DO NOT TRY TO OPEN AND REPAIR THE PRODUCT: If you have any problems with the product, please contact the authorized distributor. In case of unusual noises or smells originating from the device, immediately disconnect the product from the power outlet and contact authorized distributor. If the product becomes dirty, use a lightly damp soft cloth to wipe surfaces, taking care to not allow water into any openings. IMPORTANT: Babysense Video Monitor is designed only for hearing the babys voice and seeing the images of the baby. This product is not a medical device and should not be used as a substitute for responsible adult supervision. It is important that you regularly check on your baby personally. Safety Instructions 4 Safety Instructions for AC Power Adapter The adapter should not be exposed to direct heat sources such as a candle, stove, radiator, heat register or other appliance that emit heat. During continual use, the power adapters may become warm to the touch. This is normal and should not be a cause of concern. Examine the condition of the power cord and its plug. The adapter must be handled with care: do not handle roughly, drop or throw. When removing the power adapter from the wall outlet, hold and pull from the receptacle. Do not pull on the cable itself or bend the cable as that will put additional stress on the cable and could lead to damages. Do not touch the power adapter with wet hands or allow liquids to spill on it. Make sure the adaptor cables are kept out of reach of your baby and other young children at all times. To avoid possible danger from power cords, the cords should be secured and never be hung on or near the crib. Do not replace the plugs or cable on your power adapter. This product should only be used with the AC power adapters supplied by the manufacturer, as included in this package. Never cut, damage or bend the power cord. Do not put any objects on top of the power cord, which could cause overheating, damage, combustion and electrocution. Do not leave the power adapter connected to the wall outlet when it is not plugged into the Baby or Parent Unit. WARNING:
Do not replace the AC power adapter with non-original substitutes. Improper connection may cause electrocution. Do not place the AC power adapter cable in a high wear and tear location. Never use a frayed or compromised cord. Intended for indoor use only. Safety Instructions 5 Safety Instructions for Li-ion battery (Non removable pre-installed battery) Do not attempt to repair or adjust any of the electrical or mechanical functions of the unit. Do not dismantle, cut, open, crush, bend, puncture, or shred cells or batteries. If a battery leaks, do not let the battery liquid touch skin or eyes. If this happens, immediately flush the affected areas with water, and seek medical assistance. The battery should not be exposed to direct sunlight or heat sources such as a candle, stove, radiator, heat register or other appliance that emit heat. Do not modify, remanufacture, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids. Batteries may explode if damaged. Use only the battery pack supplied with the product or the same type, sold by the manufacturer or its authorized distributors. Improper use or use of unapproved batteries may present a risk of fire, explosion, or other hazards, and may invalidate the warranty. If you believe the battery is damaged, remove product from the charger and stop using the product. Never use a damaged battery. Devices charged with non-authorized AC power adapter, may cause a possible significant deterioration to the battery and/or may result in the battery swelling, exploding or significant damage. Information on disposal of product Always dispose of your product (with the non removable pre-installed battery) at the end of their life in an environmentally responsible way and in accordance with your local waste disposal requirements. All cardboard and paper packaging materials should be recycled in accordance with your local What's Included Touch +1 6 Monitor x 1 Camera x 1 Power Adapter x 2 USB Cable A to C x2 Drywall Anchors x 3 Screws x 3 Wall Mount x1 Mounting Bracket x 1 User Guide x 1 Touch +2 Monitor x 1 Camera x 2 Power Adapter x 3 USB Cable A to C x3 Drywall Anchors x 6 Screws x 6 Wall Mount x 2 Mounting Bracket x 2 User Guide x 1 Overview 7 1 2 3 4 5 6 7 8 7 9 1 2 3 4 5 6 7 8 9 Infrared LEDs Lens Microphone Night Light Speaker Reset Power Port Temperature & Humidity Sensor TF Card 10 11 12 13 14 10 11 12 13 14 Microphone Light Sensor Power Button Speaker Power Port ICONS 8 Monitor Status Camera Status Time Temp. Hum. Battery status Tap to Center Pan-Tilt Zoom Night Light Pan-Tilt-Zoom Menu Brightness Lullabies Display mode Volume 2-Way Talk Monitor Status Camera Status Display mode Camera and monitor are connected directly Camera and monitor are connected to Wi-Fi Connected directly Camera 1 Connected via Wi-Fi Split Mode Offline Patrol Mode Menu Main Menu Lullabies Play lullabies or soothing sounds. Adjust the playback volume. Select play mode and playback time. About System Info Contact us 9 Camera Settings Turn on/off cry detection Turn on/off face covered detection Turn on/off auto tracking Camera calibration General Settings Wi-Fi Setting Turn on/off low battery alert tone Turn on/off no link alert tone Factory reset Firmware update Camera manage Monitor Settings Temperature setting Feeding reminder setting Sleep mode delay Screen brightness Time setting Pair to Cheego Monitor 10 The camera is paired to the Parent Unit when supplied. There is no need to pair the units again unless the camera loses its link with the Parent Unit. To renew the pairing of your units or pair a new/additional camera, Tap "Menu > Tools > Add/Remove cameras"
on the monitor You can purchase extra cameras to add to the system, supporting up to four cameras in total. NOTE: Before you begin pairing, ensure the Camera and Parent Units are side by side and turned on. Camera Parent Unit Download APP For Mobile Access 11 Scan QR Code Install Babysense Smart Nursery app. Follow app steps to complete the camera connection. Note: Camera supports 2.4GHz network only Specifications 12 General:
Camera:
Connectivity:
Transmission Range:
Camera Channels:
Power:
Working Temperature:
Product model:
Power Adapter Wi-Fi 2.4GHz 802.11b/g/n/ax+BLE5.0 1000 feet (open space) Up to 4 DC5V / 2A 32F~104F VDM70 Input: 100-240VAC 50 / 60Hz, 200mA Max;
Output: 5V, 2A; (Model: xxxxxxxxxxx) Resolution:
Lens :
Field of View:
Pan/Tilt Range:
Support System:
Connectivity:
Storage:
Mounting Type:
Dimensions:
Item Weight:
2560*1440 3.0mm / F2.0; 6.3mm / F2.0 110~18 (diagonal) 240/70 Android 11.0/IOS 13.0 or above WIFI 2.4GHz 802.11b/g/n/ax+BLE5.0 32GB TF Cardnot for sale Wall Mount 2.68 x 2.56 x 4.33 inches 7.05 ounces Monitor:
Display:
Rechargeable battery Connectivity:
Duration:
Time to Full Charge:
Dimensions:
Item Weight:
7" IPS touch screen 5200mAH (pre-installed in Parent Unit) WIFI 2.4GHz 802.11b/g/n/ax+BLE5.0 15 hours(standby)/6hours(screen on) 6 hourspower off 7.094.132.17 inches 14.1 ounces Maintenance 13 All of the following maintenance procedures should only be performed when Baby and Parent Units are unplugged and off. Clean the surfaces of the Baby and Parent Units with a soft, fluff-free cloth. Never use cleaning agents or solvents. If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care not to allow water into any openings. Troubleshooting QR Code IMPORTANT: If the above troubleshooting guide did not help you solve your problem, please contact our customer service via:
Email - [email protected] Toll Free Number (833) 568-2229 (USA ONLY) Statements 14 FCC Statements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Warranty Warranty Terms 15 We take quality very seriously. This is why all of our products come with a one-year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues, please contact our customer service. Customer Support If you have any problems setting up or using this product, you will find useful tips and information in the Troubleshooting section of this user guide. If you have any further questions about using the product after reviewing the resources above or would like to purchase replacement parts or accessories, please contact us via:
Email - [email protected] Toll Free Number (833) 568-2229 (USA ONLY) NOTE: You can always find our contact details in the setting menu in your Parent Unit on the customer service page. IMPORTANT:
Please retain your purchase receipt and attach to the back page of this user manual as you will need to produce this if warranty service is required. BSTouch.UG.01.(US).10.25 FCC warning statements:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
