FCC ID: W9HLCDC0013 Part15 Subpart B-LCD Monitor

Innovation for life HOSPITALITY LED TELEVISION MODEL NO. LHD32K21MH ES-G112064 ii Important safety instructions Warnings Cautions Accessories Installing and removing the stand Installing the stand Attaching the TV to the desk Removing the stand Installing a wall-mount bracket TV components Front and side controls Back connections Remote control Using the remote control Installing remote control batteries Aiming the remote control Making connections Connecting the power Selecting a location Connecting an HDMI device Connecting a component video device Connecting an antenna,cable TV,or satellite TV box Connecting a VCR, camcorder, or game console Connecting a computer Connecting a home theater system Connecting headphones Connecting devices with USB interface Understanding the basics Selecting the video input source Selecting a channel Adjusting the volume Displaying program information Navigating the menus On-screen menu overview Adjusting the picture Choosing the display format (aspect ratio) Adjusting the sound Selecting the audio mode Adjusting the Features Adjusting the Installation Troubleshooting Video and audio Remote control General Maintenance Cleaning Legal notices Adjusting hotel settings 2 2 3 3 3 3 4 4 4 4 4 5 5 6 6 6 7 7 7 7 7 8 8 8 9 9 9 9 9 9 9 9 10 10 10 12 12 12 12 12 14 14 15 15 15 16 16 16 16 17 LHD32K21MH 1 f It makes a difference how and where you use CHILD SAFETY your flat panel display As you enjoy your new product, keep these safety tips in mind The issue The home theater entertainment experience is a growing trend, and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturers recommendations. We and the consumer electronics industry are committed to making home entertainment enjoyable and safe. TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and cause injury. Tune into safety One size of TV stand does not fit all. Use only a TV stand rated for the weight of your TV. Carefully read and understand all enclosed instructions for proper use of this product. Dont let children climb on or play with entertainment system furniture and TVs. Dont place TVs on furniture that can easily be used as steps, such as a crate or chest of drawers. Remember that children can become excited while watching a program, especially on a larger-than-life TV. Make sure that you place or install the TV where it cannot be pushed, pulled over, or knocked down. Make sure that you route all cords and cables so that they cannot be pulled or grabbed by curious children. Wall mounting If you decide to wall mount your TV, always remember:

One size of wall mount does not fit all. Use only a wall mount rated for the weight of your TV and that has been recommended by this TV manufacturer, listed in this manual, or otherwise listed by an independent laboratory as suitable for your TV. Follow all instructions supplied by the TV and wall mount manufacturers. If you have any doubts about your ability to safely wall mount your TV, get help from a professional installer. Make sure that the wall where you are mounting the TV is appropriate. Some wall mounts are not designed to be mounted to walls backed with steel studs or cinder blocks. If you are unsure, ask a professional installer. TVs can be heavy. At least two people are required for safe wall mount installation. 2 LHD32K21MH Important safety instructions Important safety instructions 18 The apparatus should not be exposed to dripping or splashing, on the apparatus. Warnings Electric shock hazard ric shock, do not remove any cover or expose the device to rain or moisture. No user-serviceable parts are Lightning For added protection for your device receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the power outlet and disconnect any antenna or cable system. This helps prevent property damage and personal injury from lightning and power line surges. Power lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. Handling the LED panel Your TVs screen is made of glass. Do not drop your TV or hit, jolt, or press hard against the LED panel. If the screen breaks, be careful of broken glass. If the LED panel is broken, make absolutely sure that you do not If the liquid gets in your mouth, immediately gargle, rinse, and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water. Replacement parts When replacement parts are required, make sure that the service have the same characteristics as the original part. Unauthorized hazards. Safety check After completing any service or repair to this device, ask the service technician to perform routine safety checks to determine that your TV is in correct operating condition. Power source Operate your TV only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult an electrician or your local power company. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with a dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8 Do not install near any heat sources such as radiators, heat produce heat. 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 12 Use only with a cart, stand, tripod, bracket, or the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. S3125A 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15 The wall plug is the disconnecting device. The plug must remain readily operable. 16 An apparatus with a three-prong, grounding-type plug is a Class I apparatus, which needs to be grounded to prevent possible electric shock. Make sure that you connect this Class I television to a grounding-type, three-prong outlet. 17 Remote control batteries should not be exposed to excessive heat Installing and removing the stand LHD32K21MH 3 Cautions Damage requiring service Unplug this TV from the power outl service personnel under the following conditions:

When the power supply cord or plug is damaged or frayed. If liquid has been spilled or objects have fallen into your TV. If your TV has been exposed to rain or water. If your TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because incorrect adjustment of other controls may result in damage and will often require extensive nician to restore your TV to its normal operation. If your TV has been dropped or damaged in any way. When your TV exhibits a distinct change in performance. Condensation may also form during the summer if the TV is exposed to the breeze from an air conditioner. In such cases, change the location of the TV. Mobile telephone warning To avoid interference with your TV picture and sound, operating problems, or even damage, keep your cordless and cellular telephones away from the TV. End of life directives small amount of mercury. Disposal of these materials may be regulated for environmental reasons. Your TV also contains material that can be recycled and reused. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance at www.eia.org to Outdoor antenna grounding Non-active pixels If an outside antenna or cable system is connected to your TV, make sure that the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to correct grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of the antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. E provide exceptionally sharp video quality. Occasionally, a few of your TV, and are not considered defects. Accessories Make sure the following accessories are included in the box with your TV:

Remote control 1 2 3 4 5 6 7 Antenna lead-in wire Grounding clamp Antenna discharge unit Grounding conductors Ground clamps Power service grounding electrode system Electric service equipment 1 2 3 4 5 6 7 Note to CATV system installer Article 820 of the National Electrical Code, ANSI/NFPA No. 40 provides it states that the cable ground must be connected to the grounding system of the building as close to the point of cable entry as practical. Condensation Moisture will form on the TV if the TV is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, the TV's performance may be impaired. To prevent this, let the TV stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. AC power cord AAA batteries (2) Stand Quick Setup Guide Installing and removing the stand You must install your TV into the stand in order for it to stand upright on or other vertical surface, you must remove the stand . Warning: Before attampting assembly or removal of the stand, unplug the AC power cord. Cautions:

Read these instructions carefully before you try to assemble the stand or remove the stand . Make sure that you handle the TV carefully when attempting to assemble or remove the stand. If you are not sure of your ability to do this, contact a professional installer or service technician. Hisense is not responsible for any damages or injuries that occur because of mishandling or incorrect assembly. Use a soft cushion or covering to prevent scratching or damage to the TV screen or cabinet. Installing the stand Note To install the stand:

1. Insert the stand column into the base plate, aligning the ridge on the column with the groove in the base plate. Making sure the FRONT of stand column match the FRONT of base plate. Secure the stand column to the base plate with the four screws

(M4, 12mm) provided. 4 LHD32K21MH TV components 2 3 Secure the stand column to the stand cover vertically with the 2 screws (M4,12mm) provided. Secure the stand column to the stand cover horizontally with the 2 screws (ST4,14mm) provided. Insert the stand cover into the slot of TV bottom side and secure the stand to the TV with the four provided screws (M5, 12 mm). Installing a wall-mount bracket If you want to attach the TV to a wall-mount bracket (not provided), you Warning only. To reduce the risk of hazards, do not perform any servicing other than that contained in the operating instructions unless you are To install a wall-mount bracket:

1 Lay your TV face down on a table or bench. Make sure that you put down a soft cushion or cloth so that your TV is not scratched. 2 Remove the pedestal stand. See Removing the stand above. 3 Secure the wall-mount bracket to the back of your TV using the four screws provided with the bracket. Attaching the TV to a desk The TV must be attached to desk so it cannot be pulled in a forward/backward direction,potentially causing injury or damaging the product. Screws:M5L(table depth + 8~10mm) Example:Table depth = 15mm Screws:M525 11.97inch(304mm) i h c n 2 7

. 4

) m m 0 2 1

4-Screws NOTE:

Be sure to follow the instructions,in correct installation of the stand

(pedestal) may result in the TV falling over. Removing the stand You must remove the stand before you can wall-mount the TV. 2 1 Note TV components Front and side controls Desk 3 4 5 6 7 To remove the stand:

1 Lay the TV (screen down) on the edge of the table or bench. Make sure that you put a soft cloth or cushion between the table or bench and the TV. 2 Remove the 4 screws holding the stand to the TV, then remove the stand. Item Name Description 1 2 3 4 5 6 7 Power indicator Remote control sensor MENU INPUT VOL / VOL CH /CH

(power) The light shows whether the TV is on or standby mode. Receives signals from the remote control. Please do not block. Display the onscreen display(OSD) or Exit to close the OSD. Select the INPUT menu. Volume adjusting bottom,to increase or decrease the volume. Channel selection bottom,to increase or decrease the channel.

(standby mode). TV components LHD32K21MH 5 Back connections Remote control E N O H P D A E H B S U

) X A M A 5

. 0 V 5 C D 2 1 J R R P B P Y R L 3 I M D H 2 I M D H I T N E N P M O C 10 1 11 4 6 DIGITAL AUDIO OUT ANT 75 PC AUDIO VGA HDMI 1 VIDEO L R 7 2 5 9 6 TV INPUT CCD MTS/SAP ASPECT SLEEP SOUND PICTURE INFO GUIDE VOL MUTE DMP CH MENU EXIT ENTER 1 4 7 7 2 5 8 8 0 0 3 6 9 LAST Item Name USB Description Thise unit has USB interface and can be connected the stand avd USB 1.1 and USB 2.0 USB FLASH STICK. 1 2 3 4 5 6 7 8 9 ANT IN jack Connect an antenna or cable TV to this jack. SERVICE Service only, don't use. EN-31205 COMP1 COMP2 PC AUDIO jacks VGA jack Connect component video devices to these jacks. Connect a computer (audio and video) to these jacks. HDMI 1/2/3 Connect an HDMI device to one of these jacks. Item Name DIGITAL AUDIO OUT jack Connect a digital coaxial cable to this connector, then to a digital sound system. 1 POWER AUDIO OUT AV jack Connect a audio cable to this connector. Connect a standard AV device, such as a camcorder or game console, to these jacks. 2 MTS/SAP Description Press to turn on the TV or put the TV in standby mode. Caution: The TV continues to receive power even in standby mode. Unplug the power cord to disconnect power. In analog TV mode, press to select STEREO, SAP (secondary audio language), or MONO. In digital TV mode (DTV), press to select the audio track. For more information. 10

(headphone) jack Plug headphones into this jack. 11 RJ12 Connect a RJ-12 Cable to this jack, then to an external control device(such as acomputer or A/V control system), to control theTV functions externally. 3 4 5 6 CCD SOUND PICTURE more information. Press to select the sound mode. You can select standard , custon , music and clear voice. Press to select the video mode. You can select Standard, Custom, Vivid, Game, Cinema and Power Saver. VOL / VOL Press to increase or decrease the volume. 6 LHD32K21MH Using the remote control Item Name MENU 7 8 Description Display the main menu. Go back to preview menu. Press menus. Press menus or to adjust menu settings. or or to move up or down in on-screen to move left or right in on-screen 9 ENTER or to open sub-menus. 10 Numbers Press the number buttons to enter channel numbers or the parental control password. dash) Program guide

(EPG) function buttons Press to select a digital sub-channel. After pressing the GUIDE button in the digital TV channel option, the same color buttons will appear with explanations in the on-screen display (OSD). Follow the steps shown in the OSD. 11 12 13 When you are listening to music and enjoy pictures.You can switch between playing and pause through this button. Exit the current state. Press to select the TV as the video input source. Press to open the INPUT SOURCE menu, then press or to select the video input source you want. Select screen mode. Press to set the sleep timer. Press to open the DTV program guide(if available). 14 TV 15 INPUT 16 17 ASPECT SLEEP 18 GUIDE 19 20 INFO Display the current channel number. CH

/ CH Press to go to the next or previous channel in the channel list. MUTE 21 DMP 22 EXIT 23 LAST Press to mute the sound. Press again to restore the sound. Press to browse Music and Phone on USB stick plugged into TV. Press to close the on-screen menu. Return to previous channel. Using the remote control Installing remote control batteries To install remote control batteries:

1 Press down on the battery compartment cover lock, then remove the remote control cover. 2 Insert two AAA batteries into the battery compartment. Make sure that the + and symbols on the batteries match the +

and symbols in the battery compartment. 3 Replace the cover. Make sure that the lock snaps into place. 4 Install screw. Battery precautions:

Dispose of batteries as hazardous waste. Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and can cause old batteries to leak. Remove batteries as soon as they become inoperable. Chemicals that can leak from the batteries can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If the remote control is not used for an extended period of time, remove the batteries. Do not expose batteries to excessiv other heat sources. Aiming the remote control To aim the remote control:

Point the remote control towards the remote sensor on the front of your TV. TV INPUT CCD MTS/SAP ASPECT SLEEP SOUND PICTURE INFO GUIDE VOL MUTE DMP CH MENU EXIT ENTER 1 4 7 7 2 5 8 8 0 0 3 6 9 LAST EN-31205 Notes:

Do not expose the remote control to shock or liquids. Do not use the remote control in an area with high humidity. Do not place the remote control in direct sunlight. Do not place objects, such as furniture, between the remote control and the remote sensor. The remote control may not work if direct sunlight or bright light shines on the remote sensor. Either move your TV or change the angle at which you use the remote control. Making connections LHD32K21MH 7 Making connections Before you make any connections:

Check the plugs on the ends of cables to make sure that they are the correct type before you try plugging them into jacks on the TV. Make sure that all plugs are securely inserted into the jacks. Loose connections can result in image or color problems. When connecting devices to the TV, make sure that the TV and unplugged. Connecting the power To connect the power cord:

Connect the power cable to the AC IN jack on the back of the TV, then connect the other end to a power outlet. Power outlet HDMI device HDMI cable HDMI 2 HDMI 3 L R Y PB PR RJ12 USB HEADPHONE DC 5V 0.5A(MAX) COMPINENT Note: To connect a DVI device, use a DVI to HDMI adapter cable to connect to the HDMI jack on the TV, then connect an audio cable to the PC AUDIO jack on the back of the TV. To play from the HDMI device:

1 Turn on the TV, then press INPUT. The INPUT SOURCE menu or to select HDMI1,HDMI2,HDMI3, then press opens. 2 Press ENTER. 3 Turn on the HDMI device, then set it to the correct mode. Refer to the instructions that came with the HDMI device. Power cord Connecting a component video device Notes:

Make sure that you only use the type of power source indicated on the marking label. Always unplug the power cord when not using the TV for a long period of time. Selecting a location You should select a location for the TV:

Where direct light does That has indirect and soft lighting Where the TV has access to an antenna or cable TV connection Where the TV has access to a power outlet Note:

may cause eye strain. Connecting an HDMI device Note: If your device has an HDMI connection, we recommend you use it to get the best picture and sound quality possible. To connect an HDMI device:

Connect one end of an HDMI cable (not included) to the HDMI 1 or HDMI 2 jack on Or HDMI3 on the side of your TV. then connect the other end of the cable to the HDMI OUT jack on the HDMI device. Component cables often have red, green, and blue color-coded video connectors and red and white audio connectors. Match the colors when making connections. To connect a component video device:

1 Make sure that your TVs power cord is unplugged and the 2 Connect a component video cable to the COMPONENT OUT jacks on the component video device. HDMI 2 HDMI 3 L R Y PB PR RJ12 USB HEADPHONE DC 5V 0.5A(MAX) L COMPINENT R R Y B l e b a c o d u A i i l e b a c o e d v t n e n o p m o C Component video device 3 Connect the other end of the component video cable to the COMPONENT jacks on the back/side of your TV. 4 Connect an audio cable to the AUDIO OUT jacks (L/R) on the component device. 5 Connect the other end of the audio cable to the COMPONENT AUDIO-R and AUDIO-L jacks on the back/side of your TV. 8 LHD32K21MH Edited by Foxit Reader Copyright(C) by Foxit Software Company,2005-2008 For Evaluation Only. Making connections To play from the component video device:

1 Turn on the TV, then press INPUT. The INPUT SOURCE menu opens. 2 Press 3 Turn on the component video device and start playback. Refer to to select Component then press ENTER. or the instructions that came with the component video device. Connecting an antenna, cable TV, or satellite TV box If you are connecting a satellite TV or cable box, you can use one of the following (if available):

Best - HDMI cable Better - Video component cables Good - Video composite cable Acceptable - 75-ohm coaxial cable. To connect an antenna, cable TV, or satellite TV box:

Connect one end of a 75-Ohm, coaxial cable to the jack on the back of the TV, then connect the other end of the cable to the antenna or cable TV wall jack. ANT IN Home antenna terminal

(75 ohm) ANT IN jack on the side of the TV Antenna, cable TV, or satellite box 75-Ohm coaxial cable DIGITAL AUDIO OUT ANT 75 PC AUDIO VGA HDMI 1 VIDEO L R Notes:

We recommend using a 75-Ohm, coaxial cable to reduce interference and noise that may be caused by radio wave transmissions. Do not bundle the coaxial cable with the power cord or any other cables. If you are using an antenna and reception is not good, contact a service technician to adjust the antenna. Connecting a VCR, camcorder, or game console Note: If the VCR, camcorder, or game console has component jacks

(better), or an HDMI jack (best), connect them using the best available connection. To connect a VCR, camcorder, or game console:

1 Make sure that your TVs power cord is unplugged and the VCR, 2 Connect one end of a standard AV cable (not included) into the AV video jack on the back of the TV, then connect the other end of the cable to the AV OUT VIDEO jack on the external device. 3 Connect the audio connectors of the AV cable (the red and white connectors) to the AV OUT AUDIO jacks of the external device, then connect them to the AV L and R jacks on the back of your TV. DIGITAL AUDIO OUT ANT 75 PC AUDIO VGA HDMI 1 VIDEO L R Note: Cables are often color-coded to connectors. Connect yellow to yellow, red to red, and white to white. AV cable VCR, camcorder, or game console To play the external AV device:

1 Turn on the TV, then press INPUT. The INPUT SOURCE menu opens. 2 Press 3 Turn on the device, then start playback on the device. to select Video, then press ENTER. or Connecting a computer To connect a computer:

1 Make sure that your TVs power cord is unplugged and the 2 Connect one end of a VGA cable (not included) to the VGA jack on the side of the TV, then connect the other end of the cable to the VGA jack on the computer. The D-Sub cable will not supplied with the product. We strongly recommend to use D-Sub cable with 2 cores as shown DIGITAL AUDIO OUT ANT 75 PC AUDIO VGA HDMI 1 VIDEO L R Audio cable VGA cable Computer 3 Connect one end of an audio cable with a stereo mini-plug (not included) to the PC AUDIO jack on the side of the TV, then connect the other end of the cable to the AUDIO OUT jack on the computer. To play video from the computer:

1 Turn on the TV, then press INPUT. The INPUT SOURCE menu opens. 2 Press 3 Turn on the computer, then adjust the computer display to select PC, then press ENTER. or properties as needed. Understanding the basics Edited by Foxit Reader Copyright(C) by Foxit Software Company,2005-2008 For Evaluation Only. LHD32K21MH 9 Connecting a home theater system Connecting using a digital audio cable To connect using a digital coaxial cable:

1 Make sure that your TVs power cord is unplugged and the home HDMI 2 HDMI 3 L R Y PB PR RJ12 USB HEADPHONE DC 5V 0.5A(MAX) COMPINENT 2 Connect one end of a digital coaxial audio cable (not included) to the DIGITAL AUDIO OUT jack on the back of the TV. Understanding the basics DIGITAL AUDIO OUT Digital coaxial cable Home theater system 3 Connect the other end of the audio cable to the digital coaxial input jack on the home theater system. To play TV sound through a home theater system:

1 Turn on the TV and select a program to watch. 2 Turn on the home theater system and select the TV sound source, then adjust the volume to a comfortable level. 1 Plug the power cord into an AC power outlet. 2 Press 3

(power). Your TV turns on. goes into standby mode. Warning: When your TV is in standby mode, it is still receiving power. To completely disconnect power, unplug the power cord. Note: If your TV does not receive an input signal for several minutes, it automatically goes into standby mode. Selecting the video input source To select the video input source:

1 Turn on your TV, then press INPUT on the remote control or on the TV. The INPUT SOURCE menu opens. 2 Press or to highlight the video source you want, then press ENTER. Options include TV,Video,Component ,PC(computer) HDMI1,HDMI2,HDMI3,DMP. Connecting headphones Selecting a channel Warning: When using headphones, adjust the headphone volume to avoid excessively loud volume which can damage your hearing. Tip: If you are using a cable or satellite box, use the remote control that came with that device to change channels. To connect headphones:

Plug the headphones (not included) into the jack on the back of the TV. Note: The TV sound automatically mutes when headphones are

(headphone) HDMI 2 HDMI 3 L R Y PB PR RJ12 USB HEADPHONE DC 5V 0.5A(MAX) COMPINENT Connecting devices with USB interface Plug the USB stick into USB port on the side of TV. 1. The USB detect message will pop out when you plug in USB stick into TV. Select "OK" to review content on USB. 2. Or you can press INPUT button on the remote control or on the TV and select DMP in source list. To select a channel:

Press CH Press the number buttons to enter the channel number you want, then wait for the channel to change, or press ENTER to change the channel immediately. to go to the next or previous channel.

/CH To select a digital channel, press the number buttons to select the main digital channel, then press the dash(-). button, then the number buttons again to select the sub-channel. Wait for the channel to change or press ENTER to change the channel. Note: Button presses must be within three seconds of each other. Press LAST to go to the last channel viewed. Press GUIDE to display a list of memorized channels, press or to select the channel you want from the list, then press ENTER to go to that channel. Note: If the list has more than one page, press the pages. or to scroll through Adjusting the volume To adjust the volume:

/VOL Press VOL Press MUTE to restore the sound. to increase or decrease the volume. MUTE again 10 LHD32K21MH Understanding the basics Displaying program information To display program information:

Press INFO to show an information banner. The information banner shows current program information such as channel number, video input source, and resolution. Digital signal informationDisplays channel number, station name, channel label (if preset), broadcast program name, signal type, audio information, resolution,and current program start and end times when watching a digital channel. Analog signal informationDisplays channel number, channel label (if preset), signal type, audio information, and resolution when watching an analog channel. Press GUIDE to show the digital program guide, which may show a list of available programs, program times, and program summaries, depending on the in formation provided by the broadcaster. Navigating the menus MENU Press to display the Main menu. Press to select menus, to adjust selected items, or move on-screen cursor left or right. 1 Picture Preset Mode conditions. Contrast Brightness Backlight Saturation Hue Sharpness Color Temperature Lets you adjust the level of picture contrast. Increasing the contrast adds more light to the white areas of the picture. Lets you adjust the level of brightness on the screen. Increasing brightness can add more light to dark areas of the picture. Lets you control panel overall brightness and background. Lets you adjust the level of color intensity. Adjusts the color balance of the picture.Use this control to make skin tone look more natural. Lets you adjust the focus of the picture. Increase sharpness for a clearer picture, or decrease sharpness for a smoother picture. Lets you select one of three preset color temperature settings: Cool, Normalor Warm. Sound TV Sound mode Standard Equalizer >>>

Balance Digital audio language English 0 ENTER ENTER Press to select the menu items. Sound mode Lets you select one of preset sound mode or Move:

Enter: OK Exit: EXIT 2 ENTER sub-menu. EXIT Press to close the menu. On-screen menu overview your TV. To access the menu, press MENU. The menus and their corresponding functions are described in the following table:

Picture TV Picture mode Standard Contrast Brightne Backlight Saturation Hue Sharpness Color temperature Normal

. 50 50 5 50 0 5 Move:

Enter: OK Exit: EXIT Equalizer Lets you select the audio frequency you want to adjust and change its value. Balance 2 Sound Lets you adjust the balance between the left and right speakers. Digital audio language Lets you select the language track you prefer for viewing digital TV programs. Available options depend on your digital TV provider. Features TV Caption settings >>>

Sleep time 0 Power on >>>

Power off >>>

V-Chip >>>

Transpaerncy 0 OSD Timeout >>>

Move:

Enter: OK Exit: EXIT Caption settings programs. 3 closed 3 Features Sleep time Lets you select sleep timer among 0 to 180 minutes. Power on Lets you set the TV on time of every day. Understanding the basics LHD32K21MH 11 V-Chip Lets you select certain programs to be blocked. 3 Features Transparency Lets you adjust Menu transparency. OSD Timeout Set display time of Menu. Installation TV Language English Channels >>>

Time >>>

Source Labels >>>

Reset AV settings Start now DMP DMP Slide time Long Transitions None Rotate 0 Zoom 1X Move:

Enter: OK Exit: EXIT 6 Slide time Transitions Rotate Zoom Lets you select the photo slide time: Long, Medium or Shot. Lets you select photo transitions way from current picture to next picture. Lets you rotate picture. Lets you zoom in/out picture. 6 DMP Move:

Enter: OK Exit: EXIT 4 DMP Function Introduction Signal mode support format Pcture Music JPEG MP3 Language Lets you select the lanugage for the On-Screen Display. Choose from English, French, or Spanish. Channels 4 Installation Time Lets you select RF signal source for your TV. And lets you initiate an automatic channel scan to search the available channels on your TV. settings and daylight saving.

, Source Labels Lets you name each input. Reset AV settings Change setting back to default. (picture and sound only) PC PC Auto adjustment Start now Clock Phase Horizontal shift Vertical shift Standby time 0 15 30 15 0 Move:

Enter: OK Exit: EXIT 5 Auto adjustment Clock Phase Horizontal shift Vertical shift Standby time Adjust the position of image on screen automatically. Adjust the clock used to synchronizing the image. Adjust the phase of the clock used for synchronizing the image. Adjust the horizontal position of the image. Adjust the vertical position of the image. input. 5 PC 12 LHD32K21MH Adjusting picture and sound Adjusting the picture To adjust the picture:

In TV mode, you can adjust:

1 Press MENU. The Main menu opens. 2 Press ENTER or

. The Picture menu opens. erutciP erutciP Picture TV Picture mode Standard Contrast Brightness Backlight Saturation Hue Sharpness Color temperature Normal

. 50 50 5 50 0 5 Move:

Enter: OK Exit: EXIT Zoom2 Enlarges the picture but may crop the top and bottom of picture. And no black bar on right and left. Panorama Stretches the picture at the edges, but maintains a good aspect ratio at the center of the screen. Note: In analog TV mode, allows you to select all aspect modes. In digital TV mode, allows you to select Normal mode and full-

screen mode. Zoom and panorama modes are not available. Adjusting the sound To adjust the sound:

In TV mode, you can adjust:

1 Press MENU. The Main menu opens. 2 Press to highlight sound, then press ENTER or or

. The sound menu opens. Sound TV 3 Press or to highlight an option, then press or to access ENTER the option, and press or to adjust the option. You can select:

Picture ModeSelects the picture mode. You can select:

Vivid (a bright and vivid picture) Standard (a standard picture) Game(a nely detailed picture) Cinema(the brightness is decreaced) Power saver(decrease the backlight for to save energy) 3 Standard Sound mode Equalizer >>>

Balance Digital audio language English 0 Move:

Enter: OK Exit: EXIT Note

: You can also press PICTURE on the remote control to select the picture mode. Contrast Lets you increase or decrease the contrast of the picture. Increase the contrast to adjust the white areas of the picture or decrease the contrast to adjust the black areas of the picture. Brightness Lets you increase or decrease the brightness of the picture. Increasing the brightness can add more light to dark areas of the picture, while decreasing the brightness can add more darkness to light areas of the picture. Backlight Lets you control panel overall brightness. Increasing the backlight can add more light to overall screen picture and the TV uses more power consumption. While decreasing the backlight can add more darkness to overall screen picture and the TV uses less power consumption. Saturation Lets you adjust the intensity of the colors. Hue Lets you adjust the overall color of the picture (only supported in TV/AV mode). SharpnessLets you increase the sharpness level for clearer images or decrease the sharpness level for smoother images. Color temperature Lets you change the color temperature. You can select the color temperature from three options: Cool, Normal or Warm. to return to the previous menu, or press to EXIT ENTER Set the users' mode of sound, press [

Press or to highlight an option, then press or to access the option, and press or to adjust the option. You can select:

Sound mode Press [ / ] to select between 3 different pre-adjusted sound modes:Standard,music,and Clear voice. The User mode preserves your preferred sound settings after using the Equalizer available under the Sound submenu. Equalizer

] button to select the sound component of 120HZ, 500HZ, 1.5K, 5K, and 10K. Press [

proper value. Balance audio channels. Digital audio language to select the audio language for a program. In analog TV mode, you can't see this option Adjusts the balance between the left and right

] button to weaken or enlarge the sound to the In digital TV mode,allows you to return to the previous menu, or press EXIT

to

4 Press close the menu. Selecting the audio mode To select the audio mode:

Press SOUND on the remote control one or more times to cycle through the available sound modes. Options include:

(for normal programs). Standard Music (for music programs). Clear Voice (for news or sports programs). Custom (for a customized sound mode). 4 Press close the menu. Choosing the display format (aspect ratio) To choose the display format:

1 Press ASPECT on the remote control repeatedly to cycle through the available display formats. Options include:

Normal Selects the 4:3 aspect ratio to show a picture with black bar on both right and left hand side. Full ScreenShows a full-screen picture. Zoom1 Enlarges the picture but may crop the top and bottom of picture. And has less black bar on right and left than Normal aspect mode. Adjusting the Features In TV mode, you can adjust:

1 Press MENU. The Main menu opens. 2 Press or to highlight Features, then press ENTER or

. The Features menu opens Changing channel settings LHD32K21MH 13 Features TV Caption settings >>>

Sleep time 0 Power on >>>

Power off >>>

V-Chip >>>

Change PIN >>>

Transpaerncy 0 OSD Timeout >>>

Move:

Enter: OK Exit: EXIT 3 Press or to highlight an option, then press or to access ENTER the option, and press or to adjust the option. You can select:

Caption settings Lets you set up closed captions (CC). Settings include Closed captions On/Off, Analog caption service, Digital caption service and Digital caption options. Closed captions - Lets you select On, Off or On during mute. Analog caption service - Lets you select one CC server among CC-1, CC-2,CC-3,CC-4,T-1,T-2,T-3 and T-4. Digital caption service: Lets you select one cc server among CS-1,CS-2, CS-3,CS-4,CS-5 and CS-6. Digital caption options: Lets you adjust the CCfont, color, background etc or you can keep default set by the broadcaster. Sleep time Lets you select auto sleep time among 0 to 180 minutes. Power on Lets you set up auto turn TV on time. Power off Lets you set up auto turn TV off time. V-Chip Lets you prevent your children from watching inappropriate material on TV. When set, parental controls read the rating of the program and deny access to programs that exceed the ratings level you select. To watch programs that exceed the selected rating, you must enter a password. Hotel Function Lock TV Function V-Chip TV Off US TV Parental Guid... >>>

Search Lock Off US MPAA Rating Select User Save Lock Off Canadian English Rating Select Picture Lock Off Canadian French Rating Select Audio Lock Off Features Lock Off Installation Lock Off DMP Lock Off

. Move:

Move:

Enter: OK Enter: OK Exit: EXIT Exit: EXIT Access to V-Chip Menu Press the number buttons to enter the four-digit password. The default password is 0532. Press or to highlight an option, then press or to access the option. Press or to highlight a rating and press to lock the rating and all other higher ratings or unlock the rating and and all other lower ratings. Program Block The V-Chip menu opens. ENTER ENTER ARating Enable is on. BU.S. TV Ratings: You can choose TV ratings according to the illustration on the screen. CThe settings for U.S. Movie Ratings, Canada (English) Ratings, and Canada (French) Ratings follow Step B. If you want to block an unrated program, turn on this function. You can select all the ratings listed in the charts below. U.S. TV ratings (age-based) These ratings are determined by the Federal Communications Commission (FCC). TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA All children. Suitable for children 7 and older. General audiences. Parental guidance suggested. Parental guidance strongly suggested. Mature audiences only. U. S. TV ratings (content-based) Fantasy violence. FV Violence. V Sexual situations. S Strong language. L D Suggestive dialog. U.S. movie (MPAA) ratings These ratings are determined by the Motion Picture Association of America (MPAA). G PG PG-13 R General audiences. Parental guidance suggested. Suitable for children 13 and older. Parental guidance suggested for children under 17. Not suitable for children under 17. Adults only. NC-17 X Canadian English ratings These ratings are based on the Canadian Home Video Rating System, determined by the Canadian Motion Picture Distributors Association (CMPDA). C C8+

G PG 14+

18+

Suitable for all children. Suitable for children 8 and older. General audiences. Parental guidance suggested. Suitable for children 14 and older. Adults only. Canadian French ratings General audiences. Suitable for children 8 and older. Suitable for children 13 and older. Suitable for children 16 and older. Adults only. determined by La Rgle du cinma du Qubec. G 8 ans+

13 ans+

16 ans+

18 ans+

The V-Chip can block non rated programs as per "CEA-608-

Note:

E sec. L.3". If the option to block [None], [NR], [E]or [E] programs is used in[U.S,TV ratings ]kk, [U.S.movie(MPAA) ratings]kk, [Canada English ratings]kk or [Canada French ratings ]kk accordingly unusual resultsmay occur, and the unit may not receive emergency bulletins or other types of programming: Emergency Bulletins (Such as EAS messages, weather warnings and others) Locally originated programming News Political Public Service Announcements Religious Sports Weather. 14 LHD32K21MH Changing channel settings Change PINChange the password of the V-Chip function. TranspaerncyAdjust the transparency of menu. OSD Timeout The time it takes the OSD to disappear when no operations are performed. You can change it from Off, 5 seconds, 10seconds, and 30seconds. Adjusting the Installation To change the channel settings:

In TV mode, you can adjust:

1 Press MENU. The Main menu opens. 2 Press to highlight Installation, then press ENTER or

. The or installation menu opens. Installation TV Language English Channels >>>

Time >>>

Source Labels >>>

Reset AV settings Start now Move:

Enter: OK Exit: EXIT 3 Press or to highlight an option, then press or to access the option, and press or to adjust the option. You can select:

ENTER Language You can select the menu's language among English, French and Spanish. Channels You can select the mode of RF input and scan the available channels. Installation Channels TV Autoprogram Start now Installation mode Antenna

. Move:

Enter: OK Exit: EXIT Time Lets you set the exact time. You can setup date,time,time zone and daylight saving. Source LabelsLets you name input source. Reset AV settings Change setting back to default.

(picture and sound only) Note: Menu items that are not selectable are grayed out. Menus in this manual are described in TV mode, unless otherwise indicated. Troubleshooting LHD32K21MH 15 Troubleshooting Before calling for service, check the following information for possible solutions to problems you may experience. If none of these solutions Caution: Do not try to repair the TV yourself. Refer all servicing to Video and audio Problem No picture (screen is not lit) and no sound. Dark, poor, or no picture

(screen is lit), but sound is good. No color, dark picture, or color is not correct. Only snow (noise) appears on the screen. Dotted lines or stripes appear on the screen. Double images. Problem The picture has a few bright or dark spots. Good picture, but no sound. Audio noise. Solution on the TV or the Make sure that the power cord is plugged in. Press POWER remote control. Make sure that the correct video input source is selected. For more information, see Selecting the video input source on page 9. Try another channel. The station may be experiencing problems. Adjust the brightness. For more information, see To adjust the picture: on page 12. Make sure that the correct picture mode is selected. For more information, see To adjust the picture: on page 12. Make sure that the antenna or cable TV is connected correctly and securely. For more information, see Connecting an antenna, cable TV, or satellite TV box on page 8. Adjust the color saturation. For more information, see Adjusting the picture on page 12. Try another channel. The station may be experiencing problems. Make sure that the antenna or cable TV is connected correctly and securely. For more information, see Connecting an antenna, cable TV, or satellite TV box on page 8. Adjust the antenna. Move the TV away from noise sources such as cars, neon signs, or hair dryers. Try using a highly directional outdoor antenna or cable TV. Solution A few bright or dark spots on an LED screen is normal. It does not Make sure that the sound is not muted. Make sure that the sound mode is set to Stereo or Mono. For more information, see Selecting the audio mode on page 12. Make sure that there is no interference with infrared equipment such as a cordless telephone or headphones. Move the infrared equipment away from the TV to eliminate the noise. Remote control Problem Remote control does not work. Trouble programming your existing universal remote control. General Problem One or more channels do not display. Password is lost. Some settings cannot be accessed. TV cabinet creaks. Control buttons on the TV do not work. Solution Make sure that the TV power cord is plugged in. Make sure that there are no obstructions between the remote control and the remote control sensor on the front of the TV. Make sure that the batteries are installed correctly. For more information, see Installing remote control batteries on page 6. Replace the batteries. For more information, see Installing remote control batteries on page 6. See instructions and a table of common codes in Programming a universal remote control to work with your TV on page 7. Codes are subject to change. For up to date codes, go to www.dynexproducts.com. Replace the batteries. For more information, see Installing remote control batteries on page 6. Refer to the User Guide that accompanied your universal remote control and contact the manufacturer if problems persist. Solution Make sure that the channels are not blocked. For more information, see Setting parental controls on page 13. Enter 0532 to access parental controls, then set a new password. For more information, see Setting parental controls on page 13. If a setting is grayed, the setting is not available in the current video input mode. When the TV is in use, the temperature rises naturally and may cause the cabinet to expand or contract which can cause a creaking noise. This is not a malfunction. Disconnect the power cord, wait a few seconds, then reconnect the power cord and turn on the TV. Note: If the problem is not solved by using these troubleshooting 16 LHD32K21MH Edited by Foxit Reader Copyright(C) by Foxit Software Company,2005-2008 For Evaluation Only. Specifications, Legal notices Legal notices FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. that to which the receiver is connected. Consult the dealer or an experienced technician for help. FCC warning responsible for compliance with the FCC Rules could void the users authority to operate this equipment. Cables Connections to this device must be made with shielded cables with metallic RF/EMI connector hoods to maintain compliance with FCC Rules and Regulations. Canada ICES-003 statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. Standard Television Receiving Apparatus Appareil de rception tlvision ordinaire, Canada BETS-7 / NTMR-7 HDMI trademarks or registered trademarks of HDMI Licensing LCC. Maintenance Just like with any other household appliance, the performance and life-expectancy of your TV depends on how well you maintain it. Follow the procedures described here to clean the TV case and the LED screen. Cautions:

disconnected from the power outlet before cleaning the TV. Never spray or pour any liquid directly onto the screen or the case. Cleaning Clean your TV with a soft, dry cloth. If surfaces are extremely dirty, use a soft cloth dampened with a small amount of non-ammonia, non-alcohol-based, non-abrasive detergent solution. Clean the screen with a clean, soft, lint-free cloth. If additional cleaning is necessary, apply a small amount of non-ammonia, non-alcohol-based, non-abrasive detergent solution to the cloth. Weight and dimensions shown are approximate. TV type TV panel TV system NTSC-M, ATSC LED 31.5-inch TFT LED Receiving channels VHF: 2 - 13 UHF: 14 - 69 CATV: 1 - 125 CADTV: 1-135 DTV: 2-69 Audio multiples BTSC system Audio out 6 W x 2 Power requirement AC 120 V, 60 Hz Power consumption Dimensions

(W H D with stand) 70 W (With Max backlight) 29.92 20.90 7.87 inches

(760 531 200 mm) Weight 22.04 lbs.

(10 kg) M4X25 (4 pc) 100 X 100 (mm) Wall Mounting VESA Size Wall-mount screws pattern Input terminals Composite video/L and R audio (1) Component video/L and R audio (2) HDMI (3) VGA/audio (1) ANT/Cable In (1) USB(1) Output terminals Digital Coaxial Audio (1) Control terminals Video Input Component Input Headphone (1) SERVICE PORT (2) NTSC-M 480I/60Hz 480P/60Hz 720P/60Hz 1080I/60Hz 1080P/60Hz PC Input VGA (640 480 60Hz ) SVGA (800 600 60Hz) SGA (1024 768 60Hz) HDMI Input RGB/60Hz (640 480 800 600 1024 768) YUV/60Hz (480I 480P 720P 1080I 1080P) Hotel Settings 17 Edited by Foxit Reader Copyright(C) by Foxit Software Company,2005-2008 For Evaluation Only. LHD32K21MH Adjusting hotel settings To adjust hotel settings:

1 Press MENU. The Main menu opens. 2 Press or to highlight SOUND, then press ENTER or , audio menu opens. Press or to highlight balance, use or to adjust to zero, then press the number buttons to enter the three-

digit password 5 4 8. The Hotel Settings Menu opens.

0

Allows installer to choose one of three options. Choices LOGO are and . WELCOME

: No logo when TV is turned on. TV goes directly to source. OFF, HISENSE OFF HISENSE WELCame

: Displays Hisense TV logo.

: Displays welcome logo. Power On Choices are and Allows installer to select one of three options. LAST, ON Standby.

: TV will return to whatere operation it was in before power LAST out. ON : TV will turn on when power is restored. Standby : TV will be activated but not turned on. Basic Setting Allows installer to active or disable basic settings. ON : TV picture defaults to Normal viewing mode, Normal Audio and Zoom Aspect is full screen. OFF : Installer can go to and adjust settings. FUNCTION Lock Allows installer to lock the following functions. User Save Lock

0

3 Note: Please redo above step if fail when opening Hotel Settings Menu. Press or to highlight an option, then press or to access the option, press or to select a value and press to adjust the option. You can select:

ENTER ENTER HOTEL MODE Allows installer to active or disable hotel options. On

: Hotel options are active.

: Hotel options are disabled.

TV ON SETTING Allows installer to set up of initial options each time a guest turns TV on. kB lock Locks key pad.

ON VOLUME VALUE TV,Video,Component, On Volume In ON mode, can be adjusted from 0 to 100. On Source Input options. Choises include PC(computer),HDMI1,HDMI2,HDMI3 and DMP. LAST TV ON CHANNEL ON CHANNEL NUMBER. On Channel Number channel when TV is turned on. If no desired channel is requested on source will activate selection and will remember previous input source. Allows installer to set up desired ON CHANNEL OFF: Usable. ON : Locked down (disabled). Locks key pad. Search Lock OFF: Usable. ON : Locked down (disabled). User Save Lock Locks hotel guest adjustment. OFF: Menu features can be adjusted by hotel guest and be remembered in TV memory. ON factory default settings. Picture Lock Locks Picture adjustments in menu. OFF: Picture adjustments in menu are allowed by user. ON : Locks all picture adjustments. Audio Lock Locks Audio adjustments in menu. OFF: Audio adjustments in menu are allowed by user. ON : Locks all audio adjustments except Balance. 18 LHD32K21MH Hotel Settings CLONING OPTION 2. A---

B---

C---

D---

E---

F---

G---

H---

J---

k---

Take loaded USB drive to next unit, plug in next installation unit (You do not need to have sources connected). Plug in loaded USB drive. Turn TV on. Go to Menu. Go to Audio menu. Go to Balance. Use arrows to adjust to zero. Enter access code 548 with remote number key. Hotel menu opens. Go to clone near bottom. Choose option Write In. Hit Enter on remote. Cloning option will appear on screen. Select Yes. System will acknowledge download success. TV will be cloned. SSID settingSet or reset SSID code for Pro:Idiom decording. Enter new SSID code. Set SSID Reset SSIDReset SSID code to factory default value. yes No

: Reset to factory default code.

: Maintain current settings. SW Versionshows current software version information. Locks Installation menu adjustment in menu. Feature LockLocks Feature menu adjustment in menu. Installation Lock DMP Lock V-ChipLocks V-Chip function in menu. Info Lock Locks DMP menu adjustment in menu. OFF: Programing name and description (if available) are displayed when info button on remote is touched. Programing info may also be available depending on provider. ON : No detail information on channel. Hotel mute Allows installer to mute TV speaker. ON OFF

: TV is muted. User can not adjust volume.

: TV is not muted. User can adjust volume. Input Selection OFF: Locked down (disabled). ON : Usable. MAX VOLUME Allows installer to adjust max volume from 0 to 100. The volume value can be input by digit-number buttons on remote. MIN VOLUME Allows installer to adjust minimum volume from 0 to 100. The volume value can be input by digit-number buttons on remote. AUTO Standby OFF ON

: TV will stay on with no signal.

: TV goes to Standby mode when there is no signal after 15 mimutes. CHANNEL SETTINGS Allows access to channel setting without exiting hotel settings menu. In channel setting mode, Allows edit and Program Guide Edit remapping and editing of channels available. Using the color keys installer can change channel position and name. Hotel Channel Setting TV Digital Page2/1 NO# Name PHY. Program Skip 1 2 3 4 5 6 7 8 9 10 23 5-1 23 5-2 23 5-3 23 5-4 17 17 29 29 45 45 57 57 69 69-1 69 69-2 Rename: Skip: Copy: Delete: Insert:

Select:

Enter: OK Exit: EXIT CLONE

(copy) settings to any additional units you are installing. A---

B---

C---

First plug in USB driver to unit that is already set up. Select READ OUT which brings up cloning function. Select YES to clone (copy). When complete, TV will show upload success. Hotel Menu will close automatically. CLONING OPTION 1. Plug in new TV. Plug in loaded USB drive. Turn TV on. Press menu. Key in numbers 2 5 6 6 3 on remote. Cloning option will appear on screen. A---

B---

C---

D---

E---

F---