FCC ID: 2AOV3QI-150P WAH0001

by: Hitachi Information & Telecommunication Engineering, Ltd. latest update: 2018-09-19 model: QI-150P

Eight grants have been issued under this FCC ID from 07/25/2018 to 09/19/2018 (this is one of eight releases in 2018 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked password defaults, instructions, troubleshooting guides, warrantee terms, & drivers.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 18
1
2
3
4
5
6
7
8

app s				submitted / available
1 2 3 4 5 6 7 8	Users Manual	Users Manual	pdf	97.31 KiB
1 2 3 4 5 6 7 8		Cover Letter(s)	pdf		March 09 2018
1 2 3 4 5 6 7 8		Cover Letter(s)	pdf		March 09 2018
1 2 3 4 5 6 7 8		Cover Letter(s)	pdf		March 09 2018
1 2 3 4 5 6 7 8		External Photos	pdf		March 09 2018 / March 03 2019
1 2 3 4 5 6 7 8		Cover Letter(s)	pdf		March 09 2018
1 2 3 4 5 6 7 8		RF Exposure Info	pdf		March 09 2018
1 2 3 4 5 6 7 8		Test Report	pdf		March 09 2018
1 2 3 4 5 6 7 8		Test Report	pdf		March 09 2018
1 2 3 4 5 6 7 8		Test Setup Photos	pdf		March 09 2018 / March 03 2019
1 2 3 4 5 6 7 8		Test Report	pdf		March 09 2018
1 2 3 4 5 6 7 8		Test Report	pdf		March 09 2018
1 2 3 4 5 6 7 8		Test Report	pdf		March 09 2018
1 2 3 4 5 6 7 8		Cover Letter(s)	pdf
1 2 3 4 5 6 7 8		External Photos	pdf
1 2 3 4 5 6 7 8		Cover Letter(s)	pdf
1 2 3 4 5 6 7 8		ID Label/Location Info	pdf
1 2 3 4 5 6 7 8		ID Label/Location Info	pdf

exhibit
download
text

1 2 3 4 5 6 7 8

Users Manual

Users Manual

pdf

97.31 KiB

QI-150P Modular User Manual(NA) Model Name: QI-150P Ver. 1.0 2018.07.12 Hitachi Information & Telecomunication Engineering,Ltd. All Rights Reserved,Copyright 2018 Hitachi Information & Telecommunication Engineering,Ltd. 1 Revision history Revision Date Ver. 1.0 July 12, 2018 Description Initial release All Rights Reserved,Copyright 2018 Hitachi Information & Telecommunication Engineering,Ltd. 2 1. Introduction This document describes notes on using wireless communication module (model name:

QI-150P) in North America. Country list:

USA 2. Features WiGig and IEEE 802.11ad-2012 standard compliant

- Supported Frequency Range : 57~64GHz

- Supported Channel: 1~3 (subject to regional regulatory restrictions)

- Supported Data Rate: MCS0, MCS1 (385Mbps) ~ MCS12 (4.6Gbps)

- Supported Modulation: /2-BPSK, /2-QPSK, /2-16QAM

-state) host interface

-S3-A-E form factor: 22 x 30mm

-2700

-2702 following potential applications

- Instant wireless sync

- Wireless display

- Cordless computing (i.e. wireless docking)

- Internet access. All Rights Reserved,Copyright 2018 Hitachi Information & Telecommunication Engineering,Ltd. 3 3. FCC compliance information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/ TV technician for help.

(Section 15.21) CAUTION:

Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.

(FCC 2.1091 and FCC 2.1093) RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. All Rights Reserved,Copyright 2018 Hitachi Information & Telecommunication Engineering,Ltd. 4 End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This radio transmitter FCCID: 2AOV3QI-150P has been approved by FCC to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna List No. Manufacturer Part No. Antenna Type Peak Gain 1 STAF T17-002-1054 Dipole Antenna 3 dBi for 2.4 & 5 GHz Note: The antenna connector is Reverse SMA type. All Rights Reserved,Copyright 2018 Hitachi Information & Telecommunication Engineering,Ltd. 5

		frequency	equipment class	purpose
1	2018-09-19	58320 ~ 62640	DXT - Part 15 Low Power Transceiver, Rx Verified	Class II permissive change or modification of presently authorized equipment
2		5775 ~ 5775	NII - Unlicensed National Information Infrastructure TX
3		2402 ~ 2480	DSS - Part 15 Spread Spectrum Transmitter
4		2422 ~ 2462	DTS - Digital Transmission System
5	2018-07-25	5775 ~ 5775	NII - Unlicensed National Information Infrastructure TX	Change in identification of presently authorized equipment. Original FCC ID: PPD-QCA9008-TBD1 Grant Date: 08/17/2015
6		58320 ~ 62640	DXT - Part 15 Low Power Transceiver, Rx Verified
7		2402 ~ 2480	DSS - Part 15 Spread Spectrum Transmitter
8		2422 ~ 2462	DTS - Digital Transmission System

Application Forms

app s	Applicant Information
1 2 3 4 5 6 7 8	Effective	2018-09-19
1 2 3 4 5 6 7 8	Effective	2018-07-25
1 2 3 4 5 6 7 8	Applicant's complete, legal business name	Hitachi Information & Telecommunication Engineering, Ltd.
1 2 3 4 5 6 7 8	FCC Registration Number (FRN)	0027168301
1 2 3 4 5 6 7 8	Physical Address	Queen's Tower B 22F, 2-3-3, Minatomirai, Nishi-ku
1 2 3 4 5 6 7 8		Yokohama, N/A 220-6122
1 2 3 4 5 6 7 8		Japan

app s	TCB Information
1 2 3 4 5 6 7 8	TCB Application Email Address	c******@telefication.com
1 2 3 4 5 6 7 8	TCB Scope	A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
1 2 3 4 5 6 7 8	TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques

app s	FCC ID
1 2 3 4 5 6 7 8	Grantee Code	2AOV3
1 2 3 4 5 6 7 8	Equipment Product Code	QI-150P

app s	Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6 7 8	Name	T****** K****
1 2 3 4 5 6 7 8	Title	Manager
1 2 3 4 5 6 7 8	Telephone Number	+81-5********
1 2 3 4 5 6 7 8	Fax Number	+81-5********
1 2 3 4 5 6 7 8	E-mail	t******@hitachi.com

app s	Technical Contact
1 2 3 4 5 6 7 8	Firm Name	DEKRA Testing and Certification Co., Ltd.
1 2 3 4 5 6 7 8	Name	V****** W**
1 2 3 4 5 6 7 8	Physical Address	No.5-22, Ruishukeng, Linkou Dist.
1 2 3 4 5 6 7 8		No.5-22, Ruishukeng, Linkou Dist., New Taipei City
1 2 3 4 5 6 7 8		Taiwan
1 2 3 4 5 6 7 8	Telephone Number	886-2********
1 2 3 4 5 6 7 8	Fax Number	886-2********
1 2 3 4 5 6 7 8	E-mail	v******@dekra.com

app s	Non Technical Contact
1 2 3 4 5 6 7 8	Firm Name	DEKRA Testing and Certification Co., Ltd.
1 2 3 4 5 6 7 8	Name	V****** W******
1 2 3 4 5 6 7 8	Physical Address	No.5-22, Ruishukeng, Linkou Dist.
1 2 3 4 5 6 7 8		No.5-22, Ruishukeng, Linkou Dist., New Taipei City
1 2 3 4 5 6 7 8		Taiwan
1 2 3 4 5 6 7 8	Telephone Number	886-2********
1 2 3 4 5 6 7 8	Fax Number	886-2********
1 2 3 4 5 6 7 8	E-mail	v******@dekra.com

app s	Confidentiality (long or short term)
1 2 3 4 5 6 7 8	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
1 2 3 4 5 6 7 8	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2 3 4 5 6 7 8		No
1 2 3 4 5 6 7 8	If so, specify the short-term confidentiality release date (MM/DD/YYYY format)	03/03/2019
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6 7 8	Is this application for software defined/cognitive radio authorization?	No
1 2 3 4 5 6 7 8	Equipment Class	DXT - Part 15 Low Power Transceiver, Rx Verified
1 2 3 4 5 6 7 8		NII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 6 7 8		DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 6 7 8		DTS - Digital Transmission System
1 2 3 4 5 6 7 8	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	WAH0001
1 2 3 4 5 6 7 8	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2 3 4 5 6 7 8	Modular Equipment Type	Single Modular Approval
1 2 3 4 5 6 7 8	Purpose / Application is for	Class II permissive change or modification of presently authorized equipment
1 2 3 4 5 6 7 8	Purpose / Application is for	Change in identification of presently authorized equipment. Original FCC ID: PPD-QCA9008-TBD1 Grant Date: 08/17/2015
1 2 3 4 5 6 7 8	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	Yes
1 2 3 4 5 6 7 8	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1 2 3 4 5 6 7 8	Grant Comments	C2PC: 1. Reduce the output power of Bluetooth by firmware. 2. Add one new antenna of WLAN and Bluetooth with different type and lower gain. The added antenna is used for mobile devices and is not allowed in portable devices except with additional RF exposure evaluation and certification. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.17 W/kg and 0.17 W/kg respectively.
1 2 3 4 5 6 7 8		C2PC: 1. Reduce the output power of Bluetooth by firmware. 2. Add one new antenna of WLAN and Bluetooth with different type and lower gain. The added antenna is used for mobile devices and is not allowed in portable devices except with additional RF exposure evaluation and certification. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5 cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.17 W/kg and 0.17 W/kg respectively.
1 2 3 4 5 6 7 8		C2PC: 1. Reduce the output power of Bluetooth by firmware. 2. Add one new antenna of WLAN and Bluetooth with different type and lower gain. The added antenna is used for mobile devices and is not allowed in portable devices except with additional RF exposure evaluation and certification. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5 cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are < 0.1 W/kg and < 0.1 W/kg respectively.
1 2 3 4 5 6 7 8		Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5 cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.17 W/kg and 0.17 W/kg respectively.
1 2 3 4 5 6 7 8		Output power listed is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable RF exposure category configurations (i.e. antenna to persons separation less than 20 cm) is not allowed. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
1 2 3 4 5 6 7 8		Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.17 W/kg and 0.17 W/kg respectively.
1 2 3 4 5 6 7 8		Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2.5 cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are < 0.1 W/kg and < 0.1 W/kg respectively.
1 2 3 4 5 6 7 8	Is there an equipment authorization waiver associated with this application?	No
1 2 3 4 5 6 7 8	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2 3 4 5 6 7 8	Firm Name	DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
1 2 3 4 5 6 7 8	Firm Name	DEKRA TESTING AND CERTIFICATION Hsin Chu Lab.
1 2 3 4 5 6 7 8	Name	V**** L******
1 2 3 4 5 6 7 8	Name	R**** W******
1 2 3 4 5 6 7 8	Telephone Number	88628******** Extension:
1 2 3 4 5 6 7 8	Telephone Number	886-3******** Extension:
1 2 3 4 5 6 7 8	Fax Number	88628********
1 2 3 4 5 6 7 8	Fax Number	886-3********
1 2 3 4 5 6 7 8	E-mail	v******@dekra.com
1 2 3 4 5 6 7 8	E-mail	r******@dekra.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15C	CC	58320.00000000	62640.00000000	0.0380000
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	15E	38 CC MO	5180	5240	0.074
2	2	15E	38 CC MO	5190	5230	0.057
2	3	15E	38 CC MO	5210	5210	0.012
2	4	15E	38 CC MO	5260	5320	0.075
2	5	15E	38 CC MO	5270	5310	0.057
2	6	15E	38 CC MO	5290	5290	0.014
2	7	15E	38 CC MO	5500	5720	0.07
2	8	15E	38 CC MO	5510	5710	0.055
2	9	15E	38 CC MO	5530	5690	0.037
2	1	15E	38 CC MO	5745	5825	0.071
2	11	15E	38 CC MO	5755	5795	0.044
2	12	15E	38 CC MO	5775	5775	0.013
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
3	1	15C	CC	2402	2480	0.013
3	2	15C	CC	2402	2480	0.009
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
4	1	15C	CC	2402	2480	0.002
4	2	15C	CC MO	2412	2472	0.44
4	3	15C	CC MO	2422	2462	0.417
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
5	1	15E	38 CC MO	5180	5240	0.074
5	2	15E	38 CC MO	5190	5230	0.057
5	3	15E	38 CC MO	5210	5210	0.012
5	4	15E	38 CC MO	5260	5320	0.075
5	5	15E	38 CC MO	5270	5310	0.057
5	6	15E	38 CC MO	5290	5290	0.014
5	7	15E	38 CC MO	5500	5720	0.07
5	8	15E	38 CC MO	5510	5710	0.055
5	9	15E	38 CC MO	5530	5690	0.037
5	1	15E	38 CC MO	5745	5825	0.071
5	11	15E	38 CC MO	5755	5795	0.044
5	12	15E	38 CC MO	5775	5775	0.013
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
6	1	15C		58320.00000000	62640.00000000	0.0380000
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
7	1	15C	CC	2402	2480	0.013
7	2	15C	CC	2402	2480	0.009
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
8	1	15C	CC MO	2402	2480	0.002
8	2	15C	CC MO	2412	2472	0.44
8	3	15C	CC MO	2422	2462	0.417

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: ZZ2-P402W Amcrest Technologies LLC 2BDVP-CTA2 Traintrackr LLC 2ASRT-NPX750 Screeneo Innovation SA ZZ2-P401W Amcrest Technologies LLC 2A9DA-HW8810 SHANTOU CITY CHENGHAI DISTRICT HONGWANG ELECTRONICS CO., LTD