FCC ID: 2AQ9F-HLW-TNMP7-R1 WIRELESS CHARGER

Manual Size: 75mm W x 75mm H Printing : Double-sided printing Manual P/N : MFL67903143 Country : USA TOP 4-R3 75 5 7 Green light blinking Charging /Charging complete Red light blinking Charging Error BOTTOM To charge your cell phone, connect the USB cable to the adapter and pad, and then place the phone on the pad. EU DECLARATION OF CONFORMITY 1 Number 2 DoC_HLDS-HLW-TNMP7 Name and address of the Manufacturer3 Hitachi-LG Data Storage Korea, Inc.

(Gasan-dong), 189, Gasandigital 1-ro, Geumcheon-gu, Seoul, Korea This declaration of conformity is issued under the sole responsibility of the manufacturer.4 Object of the declaration5 Product information6 Product Name Super multi wireless charger Model Name

(1)HLW-TNMP7 (2)HLW-TNMP7A (3)HLW-TNMP7B (4)HLW-TNMP7C (5)HLW-TNMP7*

Additional information7 (Where symbol * can be any number, character or blank) The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:8

- References to the relevant harmonised standards used or references to the technical specifications in relation to which conformity is declared 9 Radio Equipment Directive 2014/53/EU ETSI EN 301 489-1 V2.1.1 Final Draft ETSI EN 301 489-3 V2.1.1 ETSI EN 303 417 V1.1.1 EN 62479:2010 EN 62311:2008 LVD Directive 2014/35/EU IEC 60950-1:2005+A1+A2

(EN 60950-1:2006+A11+A1+A12+A2 Ecodesign Directive Regulation N/A RoHS Directive 2011/65/EU EN 50581:2012 The notified body10 Name: America Certification Body Inc. Number: 1588 performed N/A and issued the certificate ATCB023207 Additional information7 H/W Version : 1.0 / S/W Version : 09044C Signed for and on behalf of:11 Hitachi-LG Data Storage Korea, Inc. Authorised Representative:

Hitachi-LG Data Storage Amsterdam Office EU Representative Keienbergweg 77, 1101 GE, Amsterdam, The Nethelands Place of Declaration: Amstelveen Date of issue:

21 Sep. 2018 Name and Surname / Function:

Jae Hyun Do / Director FCC ID Warning:

To assure continued FCC compliance:

Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. Exposure to Radio Frequency Radiation:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated body. with minimum distance 20cm between the device & your FCC Label Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID : 2AQ9F-HLW-TNMP7-R1 CE Conformity Notice:

Hereby, Hitachi-LG Data Storage Inc. declares that this Super multi Wireless Charger is compliant with the essential requirements and other relevant provisions of Directive 2014/53/EU. The complete Declaration of Conformity may be requested through the following postal address : Hitachi-LG Data Storage Inc.Amsterdam office

- Keienbergweg 77, 1101 GE, Amsterdam, The Nethelands www.charge-ai.com For product details and quality assurance, please refer to the link.

50mm Product Manual 8 0 m m HLW-TNMP7 MFL67903118 Product Configuration Wireless Charging Pad Stand USB Cable Manual Name of Each Part Status Indication Light USB-C Adapter Connection Read Before Use Please read this manual before using the product for safe and correct use. The figures in the manual can be different from the actual product and the contents are subject to change without notice for performance improvement. If you want to connect this product to other devices, please check if the devices are compatible with this product. Description of Symbols Caution : Items which require caution to use the product correctly and without damage. Note : Additional information which can allow the user to use the product more easily and conveniently. How to Use the Product 1. 2. 3. Connect the wireless charger to the USB adapter and plug it to the socket. Place the mobile device that supports wireless charging function on the cradle of the product. Charging begins when the products charging base and the mobile devices charging base come in contact. When charging is completed, separate the mobile device from the product. The supplied components are subject to change depending on the manufacturers circumstances. As the components are exclusively made for this product, they may not be compatible with other devices. For performance improvement the products appearance, specifications, etc. are subject to change without notice. Some smartphone may not be charged in portrait mode. In this case, charge the phone in landscape mode or PAD mode. Some mobile devices may not charge depending on the location of the mobile devices charging base. Thick mobile cases may prevent or interfere in the wireless charging performance of the mobile device. Wireless charging function is not supported when wired charger is connected to the mobile devices during wireless charging. Do not place any metallic materials, magnets, cards, etc. between the product and mobile devices. It may interfere with normal charging or cause overheating and malfunction. If the red light is blinking a metallic material might interfere in between the wireless charger and the device. Make sure to only use adapters that are compatible with the products specifications. (ex. Phone adapters certified by international standards) How to Use the Pad and Stand B A Caution on Pad (A) and Stand (B) Assembly OK NG Caution : Do not rotate the wireless charging pad. Only detach and attach the pad vertically. Charging in Vertical Position Caution : When switching the pad position from vertical to horizontal charging, detach the pad from the base, rotate it to 180 degrees and re-attach it. Charging in Horizontal Position Product Specifications Standard Input Voltage Input Current Output Power Output Voltage Frequency Output Level WPC 1.2 5 ~ 12 V DC Max 2 A Up to 15 W Max 12 V @ 15 W 115kHz ~ 130kHz 100.70dBuV/m at 3m (for USA) 16.80dBuA/m at 10m (for Europe) Suitable Temperature

-10 ~ +50 (Use)

-20 ~ +50 (Storage) LED Scenario Color of Indication Light Yellow light is turned on and turned off Green light is blinking Green light is turned on Red light is blinking OFF Status Connected to power Charging Charging complete Charging error Mobile device is separated/power off The display showing the charge complete status may differ depending on the mobile phone. High-speed Wireless Charging Fast charging is supported for mobile devices that have high-speed wireless charging function. For details, refer to the smart phones manual. Recommended adapter specifications for high-speed wireless charging :

15 W : 12 V 2 A (24 W supported) adapter Fast Charging : 9 V 1.67 A / QC2.0 / QC3.0 adapter

(Depending on the adapter specifications, charging power of the wireless charger may differ.) Safety Precautions Please use the product according to correct purpose and method of use. The company is not liable for injuries or damages caused by neglecting usages. Do not use damaged power cords/plugs or loose wall socket. Do not excessively bend or break the power cord. Information may get damaged for products with magnetic properties such as credit cards, bankbooks, and passes due to the products magnetism. Do not touch the product with wet hands. Do not cause severe impact such as dropping the product. Take caution to prevent children, infants, or pets from mouthing or biting the product. Do not use the product for purposes other than its intended use. Place the product in a dry place free of water and moisture. Do not modify or disassemble the product at the users discretion. Do not place mobile devices that do not support wireless charging. It may cause adverse effects. FCC ID Warning:

To assure continued FCC compliance:

Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. Exposure to Radio Frequency Radiation:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the device & your body. FCC Label Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CE Conformity Notice:

Hereby, Hitachi-LG Data Storage Inc. declares that this Super multi Wireless Charger is compliant with the essential requirements and other relevant provisions of Directive 2014/53/EU. The complete Declaration of Conformity may be requested through the following postal address : Hitachi-LG Data Storage Inc.Amsterdam office

- Keienbergweg 77, 1101 GE, Amsterdam, The Nethelands Product Warranty Please check if there are any missing items on the warranty. To receive service, please have this warranty and receipt with you. As this warranty is not issued again, please keep it in a safe place. After purchasing this product, make sure to fill in the information and keep it in a safe place. Model Name Purchased Date Purchased Location Customer Name Warranty Service Exclusion of Warranty Service

- You can receive warranty service for 1 year after the product purchase.

- Upon loss or breakage due to the customers fault or negligence

(damage caused by impact or inserting foreign substance) / Upon breakage due to personal repair or modification other than repair provided by the customer center / Product damage caused by natural disaster / Upon 2 or more registrations of the product without faults

(even during the warranty period)

- For A/S related information, please contact the vendor.

(For vendor information, refer to the label on the back of the product.) Service Consultation B Grade Equipment (Domestic Broadcasting and Communication Equipment) As this device is for domestic use (B Grade) and registered for Electro-Magnetic Compatibility, it is intended for domestic use and can be used in all areas.

Hitachi-LG Data Storage Korea, Inc. WIRELESS CHARGER FCC ID. : 2AQ9F-HLW-TNMP7-R1 EUT Internal Photos Figure 15 Model: HLW-TNMP7A, Internal View (Removed Cover) Figure 16 Model: HLW-TNMP7A, Internal View (Removed Main Board) Hitachi-LG Data Storage Korea, Inc. WIRELESS CHARGER FCC ID. : 2AQ9F-HLW-TNMP7-R1 Figure 17 Model: HLW-TNMP7A, Internal View (Main Board, Front View) Figure 18 Model: HLW-TNMP7A, Internal View (Main Board, Back View) Hitachi-LG Data Storage Korea, Inc. WIRELESS CHARGER FCC ID. : 2AQ9F-HLW-TNMP7-R1 Figure 19 Model: HLW-TNMP7A, Internal View (Removed WPC Antenna) Figure 20 Model: HLW-TNMP7A, Internal View (WPC Antenna)

Hitachi-LG Data Storage Korea, Inc. WIRELESS CHARGER FCC ID. : 2AQ9F-HLW-TNMP7-R1 EUT External Photos Figure 1 Model: HLW-TNMP7A, General Appearance (Front View) Figure 2 Model: HLW-TNMP7A, General Appearance (Back View) Hitachi-LG Data Storage Korea, Inc. WIRELESS CHARGER FCC ID. : 2AQ9F-HLW-TNMP7-R1 Figure 3 Model: HLW-TNMP7A, General Appearance (Side View) Figure 4 Model: HLW-TNMP7A, General Appearance (Side View) Hitachi-LG Data Storage Korea, Inc. WIRELESS CHARGER FCC ID. : 2AQ9F-HLW-TNMP7-R1 Figure 5 Model: HLW-TNMP7A, General Appearance (Side View) Figure 6 Model: HLW-TNMP7A, General Appearance (Side View) Hitachi-LG Data Storage Korea, Inc. WIRELESS CHARGER FCC ID. : 2AQ9F-HLW-TNMP7-R1 Figure 7 Model: HLW-TNMP7A, USB Cable Figure 8 Model: HLW-TNMP7B, General Appearance (Front View) Hitachi-LG Data Storage Korea, Inc. WIRELESS CHARGER FCC ID. : 2AQ9F-HLW-TNMP7-R1 Figure 9 Model: HLW-TNMP7B, General Appearance (Back View) Figure 10 Model: HLW-TNMP7B, General Appearance (Side View) Hitachi-LG Data Storage Korea, Inc. WIRELESS CHARGER FCC ID. : 2AQ9F-HLW-TNMP7-R1 Figure 11 Model: HLW-TNMP7B, General Appearance (Side View) Figure 12 Model: HLW-TNMP7B, General Appearance (Side View) Hitachi-LG Data Storage Korea, Inc. WIRELESS CHARGER FCC ID. : 2AQ9F-HLW-TNMP7-R1 Figure 13 Model: HLW-TNMP7B, General Appearance (Side View) Figure 14 Model: HLW-TNMP7B, USB Cable

Hitachi-LG Data Storage Korea, Inc. Super multi wireless charger FCC ID. : 2AQ9F-HLW-TNMP7-R1 ID Label Location Label Placement Location ID Label Placement Location FCC ID Label Format

Hitachi-LG Data Storage Korea, Inc. WIRELESS CHARGER FCC ID. : 2AQ9F-HLW-TNMP7-R1 ID Label Location Label Placement Location ID Label Placement Location FCC ID Label Format

Letter of Class II Permissive Change August 27th, 2019 Subject: Class II Permissive Change for FCC ID: 2AQ9F-HLW-TNMP7-R1 (Original Grant Date: 05/15/2019) To whom it may concern:

We Hitachi-LG Data Storage Korea, Inc. hereby declare that FCC ID: 2AQ9F-HLW-TNMP7-R1 is applied for:

(1)For model HLW-TNMP7B: To add new product name, brand, appearance and multiple colors, others are totally identical. The differences between this application and original as clarify in following list. Item Original Product name Super multi wireless charger HL Data Storage

(1)HLW-TNMP7 (2)HLW-TNMP7A (3)HLW-TNMP7B this time application WIRELESS CHARGER Charge Ai

(4)HLW-TNMP7C (5)HLW-TNMP7*

HLW-TNMP7B

(Where symbol * can be any number, character or blank) Brand Model Appearance

(2)For model HLW-TNMP7A: to add new product name, brand, appearance and change type C connection, internal parts location and layout, others are totally identical. The differences between this application and original as clarify in following list. Item Original Product name Super multi wireless charger HL Data Storage

(1)HLW-TNMP7 (2)HLW-TNMP7A (3)HLW-TNMP7B this time application WIRELESS CHARGER Charge Ai

(4)HLW-TNMP7C (5)HLW-TNMP7*

HLW-TNMP7A

(Where symbol * can be any number, character or blank) Brand Model Appearance Continued on the next page list Item Original this time application PCB Board Sincerely, Remark

(5) The letter E: To Change Resistor and Switching MOSFET

(1) The letter A: To change part position position

(2) The letter B: Power source for UFL Connector (F Position:

(6) The letter F: Reverse Coil Soldering Position Buzzer U.FL Not Used) Receptacle Connector(Not Used)

(3) The letter C: TVS Diode(Not Use)

(7) The letter G: To change type C connection location

(4) The letter D: To change Capacitor and Resistor position _______________________________________ Young-Jae Lee Chief Research Engineer Hitachi-LG Data Storage Korea, Inc.

Authority to Act as Agent Date: August 29, 2019 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

_____ AUDIX Technology Corporation_______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date:

By:

Title:

On behalf of: ____Hitachi-LG Data Storage Korea, Inc.__ Telephone: ____+82-31-8066-5631____ __________________________ ______Young-Jae Lee______

(Print name) ____Chief Research Engineer__ _____August 29, 2020____

(Company Name)

(Signature1)

Request for Confidentiality Date: August 29, 2019 Federal Communications Commission Authorization and Evaluation Division Subject: Confidentiality Request regarding Application for certification of FCC ID: 2AQ9F-HLW-TNMP7-R1 Gentlemen:

Pursuant to Section 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Functional Block Diagram Operational Description (theory of operation) Schematic Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, _______________________________________ Young-Jae Lee/Chief Research Engineer Hitachi-LG Data Storage Korea, Inc.

Date: May 2, 2019 Subject: Family model declaration letter Product: Super multi wireless charger Model: (1)HLW-TNMP7 (2)HLW-TNMP7A (3)HLW-TNMP7B

(4)HLW-TNMP7C (5)HLW-TNMP7* (Where symbol * can be any number, character or blank) FCC ID: 2AQ9F-HLW-TNMP7-R1 We hereby declare that models (1)HLW-TNMP7 (2)HLW-TNMP7A (3)HLW-TNMP7B (4)HLW-

TNMP7C (5)HLW-TNMP7* we apply for are totally identical except to the sales customer. Sincerely, _______________________________________ Young-Jae Lee Chief Research Engineer Hitachi-LG Data Storage Korea, Inc.

Request for Confidentiality Date: May 2, 2019 Federal Communications Commission Authorization and Evaluation Division Subject: Confidentiality Request regarding Application for certification of FCC ID: 2AQ9F-HLW-TNMP7-R1 Gentlemen:

Pursuant to Section 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Functional Block Diagram Operational Description (theory of operation) Schematic Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, _______________________________________ Young-Jae Lee/Chief Research Engineer Hitachi-LG Data Storage Korea, Inc.