WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6240107.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case 297 mm 420 mm 1 2 3 1.:148(W)x105(H)mm 2. 1.2.3 3.:100P 4.:. CODA5x1xQ QIG P3300072VN42 A3 size,CODA5x1xQ,Ver.2A,EN/FR 1A 100P 2022/05/17 Daisy Wang QUICK START GUIDE GUIDE DE DMARRAGE CODA5x1xQ series Read me first!
Lisez-moi dabord!
Connect to the network Connexion Internet Set up your wireless network Configuration du rseau sans-fil P3300072VN42 Check the box contents/ Vrifiez le contenu de la bote Look in the box and make sure you have the following:
Regardez dans la bote et assurez-vous davoir les items suivants :
STEP/ TAPE 1 CODA5x1xQ POWER ADAPTER bloc d'alimentation ETHERNET CABLE CBLE ETHERNET QUICK START GUIDE GUIDE DE DMARRAGE Connect the cable port/ Branchement du cble Connect the power adapter/ Branchement de lalimentation STEP/ TAPE 2 2 Connect the devices coax CABLE connector to a cable outlet in your home. Branchez le cble coaxial partir du connecteur CBLE du modem jusqu une prise coaxiale de votre maison. STEP/ TAPE 3 Connect the included power adapter from the POWER port to a wall outlet. Branchez le bloc d'alimentation partir du port dALIMENTATION du modem jusqu une prise lectrique. Note:
Battery port is used for communication to a Hitron battery backup unit (Optional). Do not use for any other purpose. Le port Battery est utilis pour la communication avec une unit de batterie de secours Hitron (en option). Ne pas utiliser d'autres fins. Access LAN for initial configuration / Accdez au rseau local pour configuration initiale User configuration/ Configuration du profil d'utilisateur STEP/ TAPE 4 To complete initial setup, your CODA will launch Easy Connect user interface on the first connected device. You can access it using a laptop connected by a Ethernet cable or any mobile device with the default Wi-Fi network name/password found on the back label of your new CODA. STEP/ TAPE 5 Pour complter l'installation initiale, votre CODA affichera l'interface Easy Connect sur le premier appareil connect. Vous pouvez y accder en branchant un ordinateur par le cble Ethernet (fourni) l'un des ports LAN (rseau local) ou en connectant un appreil sans fil au rseau Wi-Fi. Vous trouverez le nom et le mot de passe du rseau Wi-Fi (Default Wi-Fi network/key) sur l'tiquette l'arrire de votre CODA. Ethernet Method/ Mthode Ethernet Wi-Fi Method/ Mthode Wi-Fi Input: 12V 4A FCC ID: 2AHKM-CODA5814Q IC: 10778A-CODA5814Q Model Name: CODA5814Q P/N: 1234567890AB S/N: AB1234567890 Web address: 192.168.0.1 User name: cusadmin Password: (your Wi-Fi password) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Indoor use only. Made in XXXXX CM MAC: AB9876543210 eMTA MAC: AB9876543210 Default Wi-Fi network:
EasyConnectxxxxx Password: 1iIlL0OQDB8 For initial setup, click LETS GO to test your connection and enter your preferred SSID and Passphrase. The Wi-Fi Passphrase will also act as your administrator password (log with username cusadmin the next time you visit 192.168.0.1). Make sure to complete the Easy Connect walk-through so it does not come back. Note: If the CODA receives a factory reset request, the Easy Connect interface will appear again. Pour la configuration initiale, cliquez sur LET'S GO pour tester votre connexion et entrer votre SSID et mot de passe de votre choix. Votre mot de passe Wi-Fi sera galement votre mot de passe administrateur (vous pourrez vous connecter en tant qu'utilisateur cusadmin la prochaine fois que vous visiterez 192.168.0.1). Assurez vous de complter le processus pour qu'il ne revienne pas. Note: Si le CODA est rinitialis avec les valeurs d'usine par dfaut, l'interface Easy Connect s'affichera de nouveau. Connect a telephone device (optional)/ Branchement dun appareil tlphonique (optionnel) Wireless devices (optional) / Priphriques sans-fil (optionnel) STEP/ TAPE 6 Connect any LINE port to a telephone. This is required only if you have ordered telephone service. Branchez n'importe quel port LINE un tlphone. Ceci est requis seulement si vous avez command le service tlphonique. STEP/ TAPE 7 You can now connect your wireless devices with the correct SSID and Passphrase chosen in Step 5. Vous pouvez maintenant connecter vos appareils sans-fil avec votre SSID et Passphrase choisis l'tape 5. OPTIONAL: To connect a wireless device with the Wi-Fi Protected Setup button (WPS), You need to first access the GUI with the user cusadmin and your Wi-Fi Passphrase as password, enter the Wireless page to enable WPS and set Encrypt Mode to AES then save the changes. Press the WPS button on the CODA and on the device you wish to connect. You will have 2 minutes to complete the pairing process. OPTIONNEL : Pour connecter un appareil sans-fil avec le bouton WPS
( Wi-Fi Protected Setup ), vous devez d'abord accder l'interface usager avec l'utilisateur cusadmin et votre mot de passe Wi-Fi, entrez dans la page Sans-Fil pour activer WPS et dfinissez Encrypt Mode to AES puis enregistrez les modifications. Appuyez sur le bouton WPS du CODA et de l'appareil que vous souhaitez connecter. Vous aurez 2 minutes pour complter le processus de jumelage. Setup complete/ Installation termine Congratulations! You have successfully set up your CODA. If you have any problems, see the section below for help identifying the problem. Flicitations! Vous avez configur votre CODA avec succs. Si vous rencontrez un problme, consultez la section ci-dessous pour vous aider en dterminer la nature. IP addresses/ Adresses IP If your CODA is successfully connected to the network (see LED display) but you cannot access the Internet from a connected device, your devices IP address may be set up incorrectly. Si votre CODA est correctement connect au rseau (voir la section Affichage DEL), mais que votre appareil n'a pas accs Internet, il se peut que l'adresse IP de ce dernier ne soit pas configure correctement. In your devices control panel, ensure that the device is configured to receive an IP address automatically (recommended) or that it has a static IP address in the following range:
192.168.0.2~192.168.0.253. For more information, consult your operating systems documentation. Dans le panneau de configuration de votre appareil, assurez-vous que celui-ci soit configur pour recevoir une adresse IP automatiquement (recommand) ou qu'il dispose d'une adresse IP statique dans la plage 192.168.0.2~192.168.0.253. Pour plus de renseignements, consultez la documentation portant sur votre systme d'exploitation. LED display/ Affichage DEL LED Color Couleur de la DEL State tat White (for 2 sec), then Green - Steady Blanche (pour 2 sec), puis Verte Stable Power on Mise en marche Green - Slow Blinking Verte - Clignotement lent Booting Dmarrage White/Green - Alternating Blanche/Verte - En alternance Establishing DOCSIS Connexion DOCSIS en cours White - Slow Blinking Blanche - Clignotement lent Service Provisioning Approvisionnement du service LED Color Couleur de la DEL Blue - Blinking Bleue - Clignotante State tat WPS Sync Synchronisation WPS Blue - Steady (60 seconds) Bleue - Stable (60 secondes) WPS Paired Jumelage WPS complt avec succs Light blue - Steady Bleue ple - Stable Red - Blinking Rouge - Clignotante A phone is off-hook (if equipped) Un tlphone est dcroch (si quip) DOCSIS issue Problme de connexion DOCSIS White - Steady Blanche - Stable Cyan - Steady Cyan - Stable Online &. Active (Normal state) En ligne et prt l'emploi (tat normal) Red - Slow Blinking Rouge - Clignotement lent Service provisioning issue Problme d'approvisionnement du service Online & Active but all WiFi disabled En ligne et prt l'emploi mais WiFi dsactiv Red - Steady Rouge - Stable Hardware failure Dfaillance de l'appareil Cyan - Slow Blinking Cyan - Clignotement lent Software upgrade in progress Mise niveau du logiciel en cours Safety warnings/ Consignes de scurit WARNING/ ATTENTION Risk of electrical shock. Do not expose the device to water or moisture. The device is a high-performance communications device designed for home and office environments. Do not use the device outdoors. Keep the device in an environment between 0C ~ 40C (32F ~104F). To avoid overheating, do NOT place any object on top of the device. Do not restrict the flow of air around the device. The manufacturer assumes no liabilities for damage caused by any improper use of the device. Risque de choc lectrique. Ne pas exposer l'appareil l'eau ou l'humidit. Lappareil est un dispositif de communication de haute performance conu pour les environnements domestiques et de bureau. Ne pas utiliser l'appareil l'extrieur. Gardez l'appareil dans un environnement entre 0C ~ 40C (32F ~ 104F). Pour viter la surchauffe, ne placez aucun objet sur le dessus de l'appareil. Ne pas restreindre la circulation d'air autour de l'appareil. Le fabricant dcline toute responsabilit de dommages causs par une mauvaise utilisation de l'appareil. DISCLAIMER/ AVERTISSEMENT The manufacturer assumes no liabilities with respect to the contents of this document. The manufacturer also reserves the right to revise this document or update the content thereof without any obligation to notify any person of such revisions or amendments. Specifications subject to change without notice. Le fabricant dcline toute responsabilit concernant le contenu de ce document. Le fabricant se rserve le droit de rviser ce document ou mettre jour le contenu de celui-ci sans aucune obligation de notifier toute personne de ces rvisions ou modifications. Spcifications sujettes modification sans pravis. CAUTION/ MISE EN GARDE The cable distribution system should be grounded (earthed) in a accordance with ANS/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable. Le systme de distribution par cble doit tre mis la terre conformment ANS/NFPA 70, le Code national de l'lectricit (NEC), en particulier l'article 820.93, Mise la terre du blindage conducteur externe d'un cble coaxial. COPYRIGHT 2022 HITRON TECHNOLOGIES, INC. 105.0 mm m m 5
. 8 4 1 1.: 100g simile paper 2.: 105x148.5mm 3.: / Double-sided black printing 4. Printed content as attachments CODA581xQ Warning Paper P3300084VN42 Safe arning 1A-**
2022/11/17 Betty Tzeng FCC STATEMENTS FCC STATEMENTS Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This device is restricted for indoor use. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 51cm between the radiator & your body. FCC regulations restrict the operation of this device to indoor use only. Industry Canada statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil contient des metteurs / rcepteurs exempts de licence qui sont conformes au (x) RSS (s) exempts de licence d'Innovation, Sciences et Dveloppement conomique Canada. L'opration est soumise aux deux conditions suivantes:
(1) Cet appareil ne doit pas provoquer d'interfrences.
(2) Cet appareil doit accepter toute interfrence, y compris les interfrences susceptibles de provoquer un fonctionnement indsirable de l'appareil. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 31 cm between the radiator & your body. Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 31 cm de distance entre la source de rayonnement et votre corps. For indoor use only. Pour une utilisation en intrieur uniquement. UL statement Output of the external power source shall complied with ES1 and PS2 requirements, output rating 12 Vdc, minimum 4.5 A with minimum rated ambient temperature 40C and evaluated in accordance to IEC 60950-1 and/or IEC 62368-1. Ensure to connect the power cord of power adapter to a socket-outlet with earthing connection. P3300084VN42