WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6446831.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case QUICK START GUIDE GUA DE INICIO RPIDO CHITA3.1 Read me first!
Lame primero!
Connect to the network Conectar a la red Set up your wireless network Configuracin de redes Wi-Fi 0440010343N0 Check the box contents/ Verificar el contenido Look in the box and make sure you have the following:
Confirmar que en la caja vengan los siguientes articulos :
STEP/ PASO 1 CHITA3.1 POWER ADAPTER ADAPTADOR DE ALIMENTACIN ETHERNET CABLE CABLE ETHERNET QUICK START GUIDE GUA DE INICIO RPIDO Connect the cable port/ Conectar el cable coaxial Connect the power adapter/ Conectar la fuente de poder STEP/ PASO 2 Connect the devices CABLE connector to a cable outlet in your home. Conectar el cable coaxial al conector del dispositivo y al connector de su hogar. STEP/ PASO 3 Connect the included power adapter from the POWER port to a wall outlet. Conectar la fuente de poder incluida al dispositivo y al conector de electricidad en la pared. Access LAN for initial configuration / Configuracion inicial para acceso LAN Wireless Devices (Optional) / Dispositivos Wireless (Opcional) STEP/ PASO 4 To complete initial setup, you can access CHITA3.1 using a laptop connected by a Ethernet cable or any mobile device with the default Wi-Fi network name found on the back label of your new CHITA3.1. Para completar la configuracin inicial, se puede acceder al CHITA3.1 desde una laptop conectada por cable Ethernet o por algn dispositivo mvil conectado a la red Wi-Fi por defecto descrita en la etiqueta de la parte posterior de su nuevo equipo CHITA3.1. Ethernet Method/ Mtodo Ethernet Wi-Fi Method/ Mtodo Wi-Fi Model Name: CHITA3.1 P/N:0123456789AB S/N:AB1234567890 CM MAC:AB9876543210 Made in XXXXX 2.4G SSID:YZ1234567890 5G SSID:YZ1234567890 PassPhrase: 9876543210YZ STEP/ PASO 5 Connect your wireless devices with the correct SSID and Passphrase chosen in label. Conecte sus dispositivos con el SSID y contrasea (Passphrase) descritos en la etiqueta. To connect a wireless device with the Wi-Fi Protected Setup button (WPS), You need to first access the GUI with the user cusadmin and password as password, enter the Wireless page to enable WPS for each band seperately and then save the changes. Press the WPS button on the CHITA3.1 and on the device you wish to connect within 2 minutes of each other while they are in the coverage area. Para conecta un dispositivo con el botn WPS
( Wi-Fi Protected Setup ), se debe acceder a la GUI con el usuario cusadmin y la contrasea password Habilitar la funcin WPS para cada banda de forma separada y guarde los cambios realizados. Precionar el botn WPS en CHITA3.1 y en el dispositivo que desea conectar en un tiempo mnimo de 2 minutos entre ambos y teniendo ambos dispositivos en rango de conexin. Connect a Telephone Device (Optional)/ Conecte un Telfono(opcional) Connect any LINE port to a telephone. This is required only if you have ordered telephone service. Conecte su telfono a cualquier puerto telefnico. Realice este paso en caso de que haya contratado servicio telefnico. STEP/ PASO 6 Setup complete/ Configuracin Exitosa Congratulations! You have successfully set up your CHITA3.1. If you have any problems, see the section below for help identifying the problem. Felicidades! Se ha configurado CHITA3.1 con xito. En caso de haber encontrado algn problema, mire al seccin abajo para identificar el tipo de problema. IP addresses/ Adresses IP If your CHITA3.1 is successfully connected to the network (see LED display) but you cannot access the Internet from a connected device, your devices IP address may be set up incorrectly. Si su CHITA3.1 se ha conectado con xito a su red (referir la seccin Luces LED), pero no tiene acceso a Internet, es posible que la IP de su dispositivo no este configurada correctamente. In your devices control panel, ensure that the device is configured to receive an IP address automatically (recommended) or that it has a static IP address in the following range:
192.168.0.2~192.168.0.253. For more information, consult your operating systems documentation. En el panel de control de si dispositivo, asegrese de que este configurado para obtener una direccin IP automticamente (recomendado) o que tenga una ip statica perteneciente al rango 192.168.0.2~192.168.0.253. Para mas informacin consulte la documentacin de sus sistema operativo. LED display/ Luces LED POWER Green-Steady Verde-Estable Modem is running with AC power. El Modem tiene alimentacin elctrica. Off Apagado Not powered. Sin alimentacin elctrica. ETHERNET Green-Blinking Verde-Itermitente Ethernet is activated. Ethernet activado. Off Apagado Ethernet is disabled. Ethernet desactivado. DS Green-Blinking Verde-Itermitente The modem is searching for the downstream frequency. El modem est buscando frecuencia de bajada. Green-Steady Verde-Estable Downstream frequency is locked. (1 channel only) Frecuencia de bajada sincronizada. (1 solo canal) Blue-Steady Azul-Estable Cyan-Steady Cian-Estable Off Apagado Downstream frequency is locked. (channel bonding) Frecuencia de bajada sincronizada. (bonding de canales) DOCSIS 3.1 OFDM DOCSIS 3.1 OFDM Not scanning. No se escanea por canales. US Green-Blinking Verde-Itermitente The modem is searching for the upstream frequency. El modem est buscando frecuencia de subida. 2.4G Green-Blinking Verde-Itermitente The 2.4GHz wireless network is enabled, and data is being transmitted or received. La red WiFi 2.4GHz est activa y est recibiendo o enviando informacin. Green-Steady Verde-Estable The 2.4GHz wireless network is enabled, and no data is being transmitted or received. La red WiFi 2.4GHz est activa, pero no hay transmisin de informacin. Off Apagado Not powered. Red apagada. 5G Green-Blinking Verde-Itermitente The 5GHz wireless network is enabled, and data is being transmitted or received. La red WiFi 5GHz est activa y est recibiendo o enviando informacin. Green-Steady Verde-Estable The 5GHz wireless network is enabled, and no data is being transmitted or received. La red WiFi 5GHz est activada, pero no hay transmisin de informacin. Green-Steady Verde-Estable Upstream frequency is locked. (1 channel only) Frecuencia de subida sincronizada. (1 solo canal) Off Apagado Not powered. Red apagada. Blue-Steady Azul-Estable Cyan-Steady Cian-Estable Off Apagado Upstream frequency is locked. (channel bonding) Frecuencia de subida sincronizada. (bonding de canales) DOCSIS 3.1 DOCSIS 3.1 Not scanning. No se escanea por canales. STATUS Green-Blinking Verde-Itermitente Registration is in progress with cable companys head-end. Proceso de registro con la compaia de servicios. Green-Steady Verde-Estable Modem is operational. El modem esta operacional. Off Apagado Modem is offline. El modem esta offline. Safety warnings/ Advertencia de Seguridad TEL 1 Green-Blinking Verde-Itermitente The line is in use. La linea est en uso. Green-Steady Verde-Estable The line is activated. La linea esta activada. Off Apagado The line is not activated. La linea est desactivada. TEL 2 Green-Blinking Verde-Itermitente The line is in use. La linea est en uso. Green-Steady Verde-Estable The line is activated. La linea est activada. Off Apagado The line is not activated. La linea no est activada. WARNING/ ADVERTENCIA Risk of electrical shock. Do not expose the device to water or moisture. The device is a high-performance communications device designed for home and office environments. Do not use the device outdoors. Keep the device in an environment between 0C ~ 40C (32F ~104F). To avoid overheating, do NOT place any object on top of the device. Do not restrict the flow of air around the device. The manufacturer assumes no liabilities for damage caused by any improper use of the device. Riesgo de descarga elctrica. No exponga el dispositivo a agua o humedad. Este es una dispositivo de comunicacin de alto rendimiento para oficina y hogar. No usar el dispositivo al aire libre. Mantenga el dispositivo en un ambiente entre 0C ~ 40C (32F ~ 104F). Para evitar sobre calentamiento, NO colocar objetos sobre el dispositivo. No restringir flujo de aire al rededor del dispositivo. El fabricante no se responsabiliza por daos causado por uso indebido de este dispositivo. DISCLAIMER/ AVISO The manufacturer assumes no liabilities with respect to the contents of this document. The manufacturer also reserves the right to revise this document or update the content thereof without any obligation to notify any person of such revisions or amendments. Specifications subject to change without notice. El fabricante no asume responsabilidad con respecto al contenido de este documento. El fabricante se reserva el derecho de modificar y actualizar el contenido este documento sin la obligacin de notificar a ningn ente sobre cambios realizados. CAUTION/ PRECAUCIN The cable distribution system should be grounded (earthed) in a accordance with ANS/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable. La distribucin del cableado tiene que ser subterrneo de acuerdo con ANS/NFPA 70, del Cdigo National Elctrico (NEC), en particular el Articulo 820.93, Puesta a tierra de conductora externa de cable coaxial. La operacin de este equipo est sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. COPYRIGHT 2020 HITRON TECHNOLOGIES, INC. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device is restricted for indoor use. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 41cm between the radiator & your body.