Check the box contents QUICK START GUIDE Kf Look in the box and make sure you have the following:
La Me) 1 DOCSIS Probe CGN-DP2 , ' 4 ~
D CGN-DP2 POWER ADAPTER ele eae Camel) 7) F-CONNECTOR
. ADAPTER QUICK START GUIDE BATTERY hitron Install the battery Charge the battery STEP Use the screws to install the battery. STEP Use the power adapter (16V) to fully charge the battery. W) 3 Charge LED: oS }
Steady Red Status
=> Charge Battery is charging Een!
Disconnect the power adapter Turn on the unit rT When the battery is fully charged, you may disconnect the unit SEZ = The power button is located on the bottom of the unit. 4 from the power adapter. Charge LED off: Status Seca 5 Battery-H/M/L:
Battery-M Charge Battery-L y Battery is fully charged Charge Completed Erna v Install the app and connect the unit AY Install the Hitron probe app through your cable operators 6 internal deployment method. Once installed, open the app and click this icon to survey available SSIDs. Select Wi-Fi SSID Select Wi-Fi SSID CGNDP-01E0 CGNOP-01E0
(ohm ary LED Display Green-Steady :Device is running. off :Device is in charge or damaged. Please check battery status. Green-Blinking:Data transmit between cellphone and device. Green-Steady :Wifi connect between cellphone and device. off :Device damaged. Green-Blinking:Device is searching for the downstream frequency. Green-Steady :Downstream frequency is locked. Green-Blinking:Device is searching for the upstream frequency. Green-Steady :Upstream frequency is locked. S Connect options Cellphone S Safety Warning WARNING Risk of electrical shock. Do not expose the device to water or moisture. The device is a high-performance communications device designed for home and office environments. Keep the device in an environment between 0C ~ 25C. The manufacturer assumes no liabilities for damage caused by any improper use of the device. DISCLAIMER The manufacturer assumes no liabilities with respect to the contents of this document. The manufacturer also reserves the right to revise this document or update the content thereof without any obligation to notify any person of such revisions or amendments. Specifications subject to change without notice. CAUTION The cable distribution system should be grounded (earthed) ina accordance with ANS/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable. S IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. COPYRIGHT 2016 HITRON TECHNOLOGIES, INC. Green-Blinking:Registration is in progress with cable companys head-end. Green-Steady :Device is operational. off :Device is offline. Red-Blinking :Charge error. Red-Steady :Charge in process. off :Charge complete. Green-Blinking: Charge in process. (with AC power) Green-Blinking: Discharge. (without AC power) Green-Steady :Charge complete to 100 %. Green-Blinking: Charge in process. (with AC power) Green-Blinking: Discharge. (without AC power) Green-Steady :Charge complete to 66 %. Green-Blinking: Charge in process. (with AC power) Green-Blinking: Discharge. (without AC power) Green-Steady :Charge complete to 33 %. Dy, Oe Q USB Dongle Power adapter ri
Computer FCC Statement:
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
e Reorient or relocate the receiving antenna. e Increase the separation between the equipment and receiver. e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. e Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received
, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.
P/N:0440010230N0(1A)