FCC ID: 2A3OZ-SRR4IS Vehicle Radar

[Radar SRR4IS] System Overview 1 Functions of Rear Corner Radar System Function Figure Description BCW Blind-Spot Collision Warning RCCW Rear Cross-Traffic Collision Warning RCCA Rear Cross-Traffic Collision Avoidance Assist SEA Safe Exit Assist BSD : Alert for vehicle or object in the blind areas LCA : Alert for high-speed access vehicle in the rear of the ego vehicle Alert for rear crossing vehicle when the vehicle is backward Braking

Braking function of collision avoidance for rear crossing vehicle Alert for vehicles approaching from the rear when the driver or passenger gets off the vehicle Each function can be turned ON/OFF through USM operation, and when the ignition is OFFON, the previous state is memorized and returned to the previous state. When the first vehicle is produced, all functions are in default ON state. 2 Caution Class B FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient of relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is con-

Increase the separation between the equipment and receiver. nected Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation 3 Notice Notice :

This Device complies with Part 15 of the FCC Rules [and with Industry Canada license exempt RSS standard(s)]

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. Le pr sent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autoris e aux deux conditions suivantes:

(1) lappareil ne diot pas produire de brouillage, et

(2) This device must accept any interference received, including interference that may cause undesired operation. Notice :

Changes or modifications made to this equipment not expressly approved by (HL Klemove Corp.) may void the FCC authorization to operate this equipment. FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 4 FCC Instructions FCC Compliance Statement(Part 15.19 (3)) This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Interference Statement(Part 15.105) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from which the 5 FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Radiation Exposure Statement (Part 2.1091) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. SDoC form will be attached to the manual when placing to the market. 6 IC Industry Canada Statement This device complies with RSS-251 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-251 dIndustrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Industry Canada Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. Dclaration dexposition aux radiations Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non con trl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. 7 CE RED_EU declaration

(This product can be used in which EU members, in accordance with Article 10(10) or this product can be used in at least one EU country, in accordance with Article 10(2)) 8

OEM PART NUMBER suscrmmurcome (P91 -G45000-02(

SUPPLIER CODE | |

SERIAL NUMBER

| YYDDDLLLLLL####

SUPPLIER CODE 112881 DATA MATRIX 7 PRODUCT NAME +| Short Range Radar SUPPLIER PART NUMBER __ _ DATE OF MANUFACTURE XXXXXXXXXX MMMMMM NNNN Cu eI je CUSTOMER LOGO SERIAL NUMBER oft IC : 27992-SRRAIS @

FCC ID : 2A30Z-SRR4IS. Input 12 V===, 1.08 MODEL NAME

+ Model : SRR4IS HL KLEMOVE Made in Korea 4 ahaa Se SL

\_SUPPLIER NAME

HL Klemove Corp. 224, Harmony-ro, Yeonsu-gu, Incheon, Republic of Korea Date: August 13, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Vehicle Radar/SRR4IS/2A3OZ-SRR4IS) To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (below list) required to be submitted with this application be permanently withheld from public review. Permanent Confidential Request

-. Schematics

-. Block Diagram

-. Operational Description

-. Part list

-. Tune-up Procedure SPECIFY REASON FOR REQUEST (i.e. the above documents are company proprietary information that could never get into the possession of your competition). Please contact me if there is any information you may need. Sincerely, Hyung Suk Ham/ Manager

224, Harmony-ro, Yeonsu-gu, Incheon, Republic of Korea HL Klemove Corp. Date: August 13, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Vehicle Radar/SRR4IS/2A3OZ-SRR4IS) To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the the (below list) required to be submitted with this application be short-

term Confidentiality for a period of 180 days after grant is issued. Short-Term Confidential Request

-. External Photos

-. Internal Photos

-. Test set-up photo

-. User Manual SPECIFY REASON FOR REQUEST (i.e. These documents contain detailed system and equipment descriptions and related information about the product, which we considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, we feel that this information would be of benefit to our competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Hyung Suk Ham Manager HL Klemove Corp.