Accelerator Disc Folding Display and Use Unfolding your scooter:
Push the hook and lift up the handlebar from the rear fender, then press the folding lever until you hear the click sound. Folding your scooter:
Push the safety button and pull out the folding lever, then put the handlebar into the hook on the rear fender. 3 Speed Power Level Power On/Off Front Light Rear Light Power:
Turn on/off with pressing the power button for 3 seconds. The speed level will be 00, and the LED light is on. Light:
Lightly turn on/off the front and rear lights with pressing the power button, the rear light will flash when brake. 4 8 Accelerator Motor 48V 800W rear-drive,9*5.0 48V 12AH 6-7 50 Disc 54.6 FY1505462000(Shenzhen Fuyuandian Power Co.,Ltd) Front Wheel Charging 9*3.15 non-inflatable solid tire 35 12 12 25 6 To prevent damage from excessive self-consumption due to battery pack storage, and reduce the speed of the internal passivation reaction of the lithium battery. The battery needs to be charged and maintained on time:In a temperature of 252 and a relative humidity of 45%RH, after the battery is assembled into a car, the battery is placed in a half-
saturated state for storage. It is necessary to charge the battery with a certain amount of power every 3 months, and charge it with a 2A charger for 1.5 -2 hours. sixteen Hold the front end of the battery with one hand and pull out until the pack is removed. FY1505462000 (Shenzhen Fuyuandian Power Co., Ltd.) Display 06. : The throttle handle is faulty, you need to check whether the throttle line is connected successfully and stably with the connecting line on the instrument side. If it is determined that the line is connected properly, then replace the throttle handle to see if the fault can be eliminated. If the fault still cannot be eliminated, It is recommended to return to the factory for repair;
Display 07. : Brake failure, you need to check whether the brake cable is successfully and stably connected to the cable at the instrument end. If the cable is connected properly, the failure cannot be eliminated. It is recommended to return to the factory for repair;
Display 08. : Overcurrent protection, when the current of ESX1 models reaches 17A, or when the current of ESX2/3 models reaches 18A, the system will enter overcurrent protection, which needs to be shut down and restarted to recover. If the fault still cannot be eliminated, it is recommended to return to the factory service;
Display 00. : Undervoltage, indicating that the vehicle battery needs to be charged. After charging, the fault can be removed; when the battery voltage is 30V, the undervoltage fault will be displayed;
Display 01. : Overvoltage, indicating that the controller has detected that the current voltage is too high. If charging, please unplug the charger and long press the power button to shut down; when the battery voltage reaches 46V, it will display an overvoltage fault;
Display 02. : The controller is faulty, indicating that the control is faulty. After long pressing the power button to shut down, turn on again. If the fault still cannot be eliminated, it is recommended to return to the factory for repair;
Display 03. : The controller temperature is too high, please suspend the use of the vehicle, if the fault is not repaired after 10 minutes, press and hold the power button to shut down, and then restart, if the fault still cannot be eliminated, it is recommended to return to the factory for repair;
Display 04. : Communication failure, you need to check whether the communication line interface between the instrument and the control terminal is loose or falling off;
if the connection is confirmed to be intact, after the shutdown and restart, the failure cannot be eliminated, it is recommended to return to the factory for repair;
Display 05. : Hall failure, indicating that the Hall wire connecting the controller and the motor is loose or the Hall of the motor itself is damaged; it can be verified by reinserting the connection wire between the controller and the motor. After pulling out, the fault cannot be eliminated, it is recommended to return to the factory for repair;
This appliance can be used by children aged from 16 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision the appliance is only to be used with the unit provided Devices are not intended for use at elevations greater than 2000 m above sea level Prolonged Exposure to UV Rays, Rain and the Elements May Damage the Enclosure Materials, Store Indoors When Not in Use WARNING Risk of Fire No User Serviceable Parts AVERTISSEMENT- Risque dincendie et de choc lectrique - Aucune des pices ne peut tre rpare par lutilisateur