FCC ID: 2AJOTTA-1338 Multi-band GSM/WCDMA/LTE phone with Bluetooth, WLAN

Get Started Nokia G10 Camera Flash Front camera Earpiece Microphone Headset connector SIM and memory card slot Google Assistant/

Google Search key*

USB connector Loudspeaker Microphone Both SIM cards are available at the same time when the device is not being used, but while one SIM card is active, for example, making a call, the other may be unavailable. Volume keys Power/Lock key, Fingerprint sensor

*Google Assistant is not available in certain languages and countries. Where not available, Google Assistant is replaced by Google Search. Check availability at https://support.google.com/assistant. 2. Charge the battery and switch the phone on Plug a compatible charger into a wall outlet, and connect the cable to your phone. Your phone supports the USB-C cable. You can also charge your phone from a computer with a USB cable, but it may take a longer time. If the battery is completely discharged, it may take several minutes before the charging indicator is displayed. To switch your phone on, press and hold the power key until the phone vibrates. The phone guides you through the setup. USB-C USB micro-B For an online user guide and troubleshooting help, go to www.nokia.com/mobile-support. TA-1338/TA-1346 EN-LATAM 1. Insert the SIM and memory card 1. Open the SIM card tray: push the tray opener pin in the tray hole and slide the tray out. 2. Put the nano-SIM in the SIM slot on the tray with the contact area face down. 3. If you have a dual-SIM phone, put the second SIM in the SIM2 slot. Tip: To find out if your phone can use 2 SIM cards, see the label on the sales box. If there are 2 IMEI codes on the label, you have a dual-SIM phone. 4. If you have a memory card, put it in the memory card slot. 5. Slide the tray back in. Use only original nano-SIM cards. Use of incompatible SIM cards may damage the card or the device, and may corrupt data stored on the card. Use only compatible memory cards approved for use with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card. Important: Do not remove the memory card when an app is using it. Doing so may damage the memory card and the device and corrupt data stored on the card. 711608049311 V1.0 xxxxxxxxxx T-Ratings: Rating for inductive coupling with hearing aids in telecoil mode. Not all phones have been rated. A phone is considered hearing aid compatible under FCC rules if it is rated M3 or M4 for acoustic coupling and T3 or T4 for inductive coupling. These ratings are given on a scale from one to four, where four is the most compatible. Your phone meets the M3/T3 level rating. However, hearing aid compatibility ratings don't guarantee that interference to your hearing aids won't happen. Results will vary, depending on the level of immunity of your hearing device and the degree of your hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs. This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer. Hearing devices may also be rated. Your hearing device manufacturer or hearing health professional may help you find this rating. For more information about FCC Hearing Aid Compatibility, please go to http://www.fcc.gov/cgb/dro. This device has an electronic label for certification information. To access it, select Settings > System > Certification. 2021 HMD Global. HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of Nokia Corporation. Android, Google and other related marks and logos are trademarks of Google LLC. Product and safety info Important: For important info on the safe use of your device and battery, read the Product and safety info booklet before you take your device into use. You can only use your device on the GSM 850, 900, 1800, 1900;

WCDMA 1, 2, 4, 5, 8; LTE 1, 2, 3, 4, 5, 7, 8, 12, 17, 28, 66 networks. You need a subscription with a service provider. Important: 4G/LTE might not be supported by your network service provider or by the service provider you are using when traveling. In these cases, you may not be able to make or receive calls, send or receive messages or use mobile data connections. To make sure your device works seamlessly when full 4G/LTE service is not available, it is recommended that you change the highest connection speed from 4G to 3G. To do this, on the home screen, tap Settings > Network & Internet > Mobile network, and switch Preferred network type to 3G. For more info, contact your network service provider. Your device has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery or back cover, as you may damage the device. To replace the battery, take the device to the nearest authorised service facility. Charge your device with the CH-21X (UK plug) / CH-21U, PA-US5V2A-

036 (US plug) / CH-21E (EU plug) / CH-21A (Australia plug) / CH-21B

(Brazil plug) / PA-AR5V2A-058 (Argentina plug) / CH-21N (India plug) chargers. HMD Global may make additional battery or charger models available for this device. Charging time can vary depending on device capability. Some of the accessories mentioned in this user guide, such as charger, headset, or data cable, may be sold separately. Electrical Information of the Charger The following electrical information corresponds to the above-

mentioned charger models:

Input: 100 Vca - 240 Vca, 50 Hz - 60 Hz; 0,3 A Output: 5 Vcc; 2,0 A Charger safety instructions The charger is suitable to be used only with compatible devices. The charger should not be used in extremely high or low temperatures. Ventilation should not be obstructed by covering the charger with magazines, blankets, curtains etc. Open flames, such as candles, should not be placed above the charger. The charger and the wall outlet shall be easily accessible at all times. In case the cable or the plugs are damaged, stop using them. The charger requires very low maintenance. If you want to clean it, use a dry cloth or a brush. Meaning of the symbols:

For internal use only The charger should not be disposed as unsorted municipal waste. It should be recycled. The surface of the device is nickel-free. Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic stripe cards near the device for extended periods of time, since the cards may be damaged. Note: Pre-installed system software and apps use a significant part of memory space. Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a photo. Certification information (SAR) This mobile device meets guidelines for exposure to radio waves as set forth by the Federal Communications Commission (FCC). Refer to the following. FCC RF Exposure Information Your handset is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientific organization through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this handset model as reported to the FCC when tested for use at the ear is 0,72 W/kg (TA-1338)/0,93 W/kg (TA-1346), and when worn on the body in a holder or carry case, is 0,97 W/kg (TA-1338)/1,00 W/kg

(TA-1346). Body-worn Operation; This device was tested for typical body-worn operations with the handset kept 1,0 cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1,0 cm separation distance between the users body and the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this handset model with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this handset model is on file with the FCC and can be found under the FCC ID Search section of www.fcc.gov/oet/ea/ after searching on FCC ID 2AJOTTA-1338 and 2AJOTTA-1346. Additional information on Specific Absorption Rates (SAR) can be found on the FCC website at www.fcc.gov/general/radio-

frequency-safety-0. To send data or messages, a good connection to the network is needed. Sending may be delayed until such a connection is available. Follow the separation distance instructions until the sending is finished. During general use, the SAR values are usually well below the values stated above. This is because, for purposes of system efficiency and to minimise interference on the network, the operating power of your mobile is automatically decreased when full power is not needed for the call. The lower the power output, the lower the SAR value. Device models may have different versions and more than one value. Component and design changes may occur over time and some changes could affect SAR values. For more info, go to www.sar-tick.com. Note that mobile devices may be transmitting even if you are not making a voice call. Your mobile device is also designed to meet the United States Federal Communications Commission (FCC) guidelines. FCC ratings for your device and more information on SAR can be found at http:/

/transition.fcc.gov/oet/rfsafety/sar.html. The World Health Organization (WHO) has stated that current scientific information does not indicate the need for any special precautions when using mobile devices. If you are interested in reducing your exposure, they recommend you limit your usage or use a hands-free kit to keep the device away from your head and body. For more information and explanations and discussions on RF exposure, go to the WHO website at www.who.int/peh-emf/en. Copyrights and other notices FCC notice:

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For more info, go to www.fcc.gov/

engineering-technology/electromagnetic-compatibility-division/

radio-frequency-safety/faq/rf-safety. Any changes or modifications not expressly approved by HMD Global could void the users authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. HAC notice:

Your phone is compliant with the FCC Hearing Aid Compatibility requirements. The FCC has adopted HAC rules for digital wireless phones. These rules require certain phones to be tested and rated under the American National Standard Institute (ANSI) C63.19-2011 hearing aid compatibility standards. The ANSI standard for hearing aid compatibility contains two types of ratings:

M-Ratings: Rating for less radio frequency interference to enable acoustic coupling with hearing aids.

Designed by HMD Global Oy Bertel Jungin aukio 9, 02600 Espoo, Finland Model TA-1338 FCC ID: 2AJOTTA-1338, Made in China Hecho en China p

Date: April 9, 2021 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request permission to use GSM/UMTS/LTE/Wi-Fi/BT test results from Model TA-1346 in our applications for model TA-1338 FCC ID: 2AJOTTA-1338 To whom it may concern:

We,SAICT,according to the TA-1338-Declaration of changes from Initial to Variant supplied by HMD Global Oy. request permission to partially use GSM/UMTS/LTE/Wi-Fi/BT test results from model TA-1346 (FCC ID:

2AJOTTA-1346) in our applications for model TA-1338(FCC ID: 2AJOTTA-1338). You can find details next page:

For the above, we performed full test for SARHAC and partially re-used the test results of TA-1346 for other parts, shown as below. For details, please refer to the relevant test reports. Item GSM Part GSM mobile phone FCC certification GSM part 22/24 UMTS mobile phone FCC certification UMTS 22/24/27 LTE mobile phone FCC certification LTE 22/24/27 UMTS Part LTE Part BT Part BT LE with EDR FCC certification part15C testing WiFi Part WiFi 802.11b/g/n 2.4G FCC certification part15C testing Test done on the new model GSM850PCS1900 Spot Check of Output Power and Spot Check of Radiated Emission Band IIBandVBand IV Spot Check of Output Power and Spot Check of Radiated Emission Band2Band4Band5Band7 Band12Band17Band66 Spot Check of Output Power and Spot Check of Radiated Emission Spot Check of Output Power, Spot Check of Radiated Emission Spot Check of Output Power, Spot Check of Radiated 15B Part HAC part SAR part SAICT RE All retest All retest All retest Building G, Shenzhen International Innovation Center, No.1006 Shennan Road, Futian District, Shenzhen, Guangdong,China Tel:0755-33322000-8383 Fax: Email:chenliang@caict.an.cn

Company letterhead Declaration of pre-install of OTT voice service We, HMD Global Oy, as the manufacturer of FCC ID: 2AJOTTA-1338Model:

TA-1338, declares that this model supports Wi-Fi Calling and only pre-installs Google DUO of OTT service with Android OSand doesnt support any other OTT services. We tested DUO using the software from Google according to KDB 285076 D02v03 Guidance for performing T-Coil tests for air interfaces supporting VOIP to support CMRS based telephone services. APPROVED BY:

Projects Manager: Rosario Casillo Signature:

Company name: HMD Global Oy Date: 2021-4-7

Declaration of changes from TA1346 to TA-1338 SOFTWARE MODIFICATIONS:

Protocol Stack changes: No MMS/STK/USAT/USIM changes: YES TA1338 dual SIM TA1346 single SIM DM/SUPL/VT/FUMO/SWP/HCI: No Other changes detailed:No HARDWARE MODIFICATIONS:

Band changes: NO PCB Layout changes: NO Main components changes:

Transc Antenna eiver Power Amplifier GSM850 GSM900 GSM1800 GSM1900 UMTS2100 UMTS1900 UMTS1700 UMTS850 UMTS900 LTE 1 LTE 2 LTE 3 LTE 4 LTE 5 LTE 7 LTE 8 LTE 12 LTE 17 LTE 28 LTE 66 Bluetooth WiFi NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO BaseBa nd IC Duplex er ASM Rx SAW Filter NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO Tx SAW Filter NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO FM changes: NO Other components changes:

LCD/ Speaker/ Camera/ Vibrator changes: NO Other changes detailed: NO MECHANICAL MODIFICATIONS:

Use new metal front/back cover or keypad: No Mechanical shell changes:No Whole size of EUT: No Distance of Ear reference point to bottom of handset: No Other trinkets to change the surface of handset: No Other changes detailed:No APPROVED BY:

Contact Person: Rosario Casillo Title: Director Technology and Compliance E-mail: rosario.casillo@hmdglobal.com Date:2021-04-07

HMD Global Oy Bertel Jungin aukio 9 02600 Espoo Finland Tel +358 86 4213499 Fax +358 45 2133756 March 10, 2021 Declaration of Authorization HMD global Oy Bertel Jungin aukio 9, 02600 EspooFinland Finland Name Representative of agent: Chen Liang Agent Company name: SAICT Address: Building G, Shenzhen International Innovation Center, No. 1006 Shennan Road is authorized to apply for Certification of the following product(s):

Product description: Multi-band GSM/WCDMA/LTE phone with Bluetooth and WLAN We Name:

Address:

Country:

Declare that:

City: Shenzhen Country: China FCC ID2AJOTTA-1338 Validity/ expiry date: NA on our behalf. Contact Person: Rosario Casillo Title: Director Technology and Compliance E-mail: rosario.casillo@hmdglobal.com HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of the Nokia Corporation.

HMD Global Oy Bertel Jungin aukio 9 02600 Espoo Finland Tel +358 86 4213499 Fax +358 45 2133756 March 10, 2021 Federal Communications Commission Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD. 21046 Attention: Equipment Authorization Branch REQUEST FOR CONFIDENTIALITY Pursuant to Sections 0.457 (d) (l) (ii) and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of some of the information accompanying this Application of FCC ID: 2AJOTTA-1338 and as outlined below:

Exhibit 4: Block Diagram Exhibit 5: Schematic Diagrams Exhibit 10: List of Active Devices and Tune-Up Procedure Exhibit 12: Theory of Operation / Description of Circuitry These materials contain trade secrets and proprietary information not customarily released to the public and the public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. HMD global Oy, Contact Person: Rosario Casillo Position: Director Technology and Compliance E-mail: rosario.casillo@hmdglobal.com HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of the Nokia Corporation.

02600 Espoo, Finland HMD global Oy Bertel Jungin aukio 9 02600 Expoo Finland Tel +358 86 4213499 Fax +358 45 2133756 March 10, 2021 Federal Communications Commission Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD. 21046 Attention: Equipment Authorization Branch REQUEST FOR SHORT TERM CONFIDENTIALITY Pursuant to Section 0.459 of the Commissions Rules and Public Notice DA 04-1705 of June 15, 2004, the Applicant hereby requests for 0 days short term 18 confidential treatment of some of the information accompanying this application of FCC ID: 2AJOTTA-1338 and as outlined below:

- Exhibit 3: External photos

- Exhibit 7: Test setup photos

- Exhibit 8: User's manual

- Exhibit 9: Internal photos HMD global Oy, These materials contain proprietary information not yet released to the public and the public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. Contact Person: Rosario Casillo Position: Director Technology and Compliance E-mail: rosario.casillo@hmdglobal.com HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of the Nokia Corporation.