FCC ID: 2AJOTTA-1075 Smart phone

by: HMD global Oy latest update: 2018-06-14 model: TA-1075

Six grants have been issued under this FCC ID on 06/14/2018 (this is one of one hundred and seventy-six releases in 2018 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked warrantee terms, instructions, troubleshooting guides, password defaults, & drivers.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 33
1
2
3
4
5
6

app s				submitted / available
1 2 3 4 5 6	TempConfidential EN EMEA APAC PKCO255001A Nokia5 1 issue1	Users Manual	pdf	593.85 KiB
1 2 3 4 5 6		RF Exposure Info	pdf
1 2 3 4 5 6		RF Exposure Info	pdf
1 2 3 4 5 6		RF Exposure Info	pdf
1 2 3 4 5 6		RF Exposure Info	pdf
1 2 3 4 5 6		Cover Letter(s)	pdf
1 2 3 4 5 6		Cover Letter(s)	pdf
1 2 3 4 5 6		Cover Letter(s)	pdf
1 2 3 4 5 6		Cover Letter(s)	pdf
1 2 3 4 5 6		Test Report	pdf
1 2 3 4 5 6		Test Report	pdf
1 2 3 4 5 6		Test Report	pdf
1 2 3 4 5 6		Cover Letter(s)	pdf
1 2 3 4 5 6		Cover Letter(s)	pdf
1 2 3 4 5 6		ID Label/Location Info	pdf
1 2 3 4 5 6		External Photos	pdf
1 2 3 4 5 6		Internal Photos	pdf
1 2 3 4 5 6		Test Setup Photos	pdf
1 2 3 4 5 6		Test Setup Photos	pdf
1 2 3 4 5 6		Cover Letter(s)	pdf
1 2 3 4 5 6		RF Exposure Info	pdf
1 2 3 4 5 6		Test Report	pdf
1 2 3 4 5 6		Test Report	pdf
1 2 3 4 5 6		Test Report	pdf
1 2 3 4 5 6		Test Report	pdf
1 2 3 4 5 6		Test Report	pdf
1 2 3 4 5 6		Internal Photos	pdf
1 2 3 4 5 6		Test Report	pdf
1 2 3 4 5 6		Test Report	pdf
1 2 3 4 5 6		Test Report	pdf
1 2 3 4 5 6		Test Report	pdf
1 2 3 4 5 6		Test Report	pdf
1 2 3 4 5 6		Test Report	pdf

exhibit
download
text

1 2 3 4 5 6

TempConfidential EN EMEA APAC PKCO255001A Nokia5 1 issue1

Users Manual

pdf

593.85 KiB

Get Started Nokia 5.1 Main camera Flash Fingerprint sensor Headset connector Microphone Front camera Proximity/Ambient light sensor SIM cards Memory card Earpiece USB connector Loudspeaker Microphone Volume keys Power/Lock key TA-1061/TA-1075 EN-EMEA-APAC 1. Insert the SIM and memory card 1. Open the SIM card tray: push the tray opener pin in the tray hole and slide the tray out. 2. Put the nano-SIM in slot 1 on the tray with the contact area face down. If you have a second SIM, put it in slot 2. 3. Open the memory card tray: push the tray opener pin in the tray hole and slide the tray out. 4. Put the memory card in the memory card slot. 5. Slide the trays back in their slots. Use only original nano-SIM cards. Use of incompati-

ble SIM cards may damage the card or the device, and may corrupt data stored on the card. Use only compatible memory cards approved for use with this device. Incompatible cards may dam-

age the card and the device and corrupt data stored on the card. Important: Do not remove the memory card when an app is using it. Doing so may damage the memory card and the device and corrupt data stored on the card. Both SIM cards are available at the same time when the device is not being used, but while one SIM card is active, for example, making a call, the other may be unavailable. PKCO255001A V1.0 xxxxxxxxxx 2. Charge the battery and switch the phone on Plug a compatible charger into a wall outlet, and connect the cable to your phone. Your phone supports the USB micro-B cable. You can also charge your phone from a computer with a USB cable, but it may take a longer time. If the battery is completely discharged, it may take several minutes before the charging indicator is displayed. To switch your phone on, press and hold the power key until the phone vibrates. The phone guides you through the setup. For an online user guide and troubleshooting help, go to www.nokia.com/mobile-support. Note: On dual SIM capable devices, both SIM1 and SIM2 slots support 4G networks. However, if your SIM1 and SIM2 are both LTE SIM cards, the primary SIM supports 4G/3G/2G networks, while the secondary SIM can only support 3G/2G. For more information on your SIM cards, contact your service provider. Product and safety info Important: For important info on the safe use of your device and battery, read the Product and safety info booklet before you take your device into use. You can only use your device on the GSM 850/900/1800/1900;

WCDMA 1, 5, 8; LTE 1, 3, 5, 7, 8, 20, 38, 40 networks. You need a subscription with a service provider. Important: 4G/LTE might not be supported by your network service provider or by the service provider you are using when traveling. In these cases, you may not be able to make or receive calls, send or receive messages or use mobile data connections. To make sure your device works seamlessly when full 4G/LTE service is not available, it is recommended that you change the highest connection speed from 4G to 3G. To do this, on the home screen, tap Settings > Network & Internet > Mobile network, and switch Preferred network type to 2G/3G. For more info, contact your network service provider. Maximum transmit power GSM 850, 900 GSM1800, 1900 WCDMA 1, 5, 8 LTE 1, 3, 5, 7, 8, 20, 38, 40 35 dBm 32 dBm 25dBm 25 dBm Bluetooth 4.2 EIRP 20 dBm NFC WLAN 2.4G WLAN 5G 42 dBuA/m @ 10m EIRP 20 dBm EIRP 20 dBm Your device has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery or back cover, as you may damage the device. To replace the battery, take the device to the nearest authorised service facility. Charge your device with the AD-10WE (EU plug)/AD-10WX (UK plug)/

AD-10WU (US and Taiwan plug)/AD-10WA (Australia plug)/AD-10WN

(India plug)/FC0111 (India plug) charger. HMD Global may make additional battery or charger models available for this device. Charging time can vary depending on device capability. Third-party chargers that comply with the applicable USB requirements, and that can connect to your device USB connector, may also be compatible. Some of the accessories mentioned in this user guide, such as charger, headset, or data cable, may be sold separately. The surface of the device is nickel-free. Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic stripe cards near the device for extended periods of time, since the cards may be damaged. Note: Pre-installed system software and apps use a significant part of memory space. Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a photo. Note: The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range in the following countries:

AT EE IT PT BE FI LV RO BG FR LT SK HR DE LU SI CY EL MT ES CZ HU NL SE DK IE PL UK Certification information

(SAR) This mobile device meets guidelines for exposure to radio waves as set forth by the Council of Europe (CE). Refer to the following. European RF Exposure Information Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2.0 W/kg and the highest SAR value for this device when tested at the ear is 0.29 W/kg*. As mobile devices offer a range of functions, they can be used in other positions, such as on the body. In this case, the highest tested SAR value is 1.80 W/kg* at the separation distance of 0.5 cm from the body. operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device has an electronic label for certification information. To access it, select Settings > System > Certification. 2018 HMD Global. All rights reserved. HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of Nokia Corporation. The Bluetooth word mark is owned by the Bluetooth SIG, Inc. and any use of such mark by HMD Global is under license. For electronic safety, maintain the separation distance with accessories containing no metal, that position handset a minimum of the above distance. Use of other accessories may not ensure compliance with RF exposure guidelines.

*The tests are carried out in accordance with international guidelines for testing. This mobile device meets guidelines for exposure to radio waves as set forth by the Federal Communications Commission (FCC). Refer to the following. FCC RF Exposure Information Your handset is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientific organization through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model handset as reported to the FCC when tested for use at the ear is 1.10 W/kg, and when worn on the body in a holder or carry case, is 1.08 W/kg. Body-worn Operation; This device was tested for typical body-worn operations with the handset kept 1.5 cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.5 cm separation distance between the users body and the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this model handset with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model handset is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/ after searching on FCC ID 2AJOTTA-1061 or 2AJOTTA-1075. Additional information on Specific Absorption Rates (SAR) can be found on the FCC website at www.fcc.gov/general/radio-frequency-

safety-0. To send data or messages, a good connection to the network is needed. Sending may be delayed until such a connection is available. Follow the separation distance instructions until the sending is finished. During general use, the SAR values are usually well below the values stated above. This is because, for purposes of system efficiency and to minimise interference on the network, the operating power of your mobile is automatically decreased when full power is not needed for the call. The lower the power output, the lower the SAR value. Device models may have different versions and more than one value. Component and design changes may occur over time and some changes could affect SAR values. For more info, go to www.sar-tick.com. Note that mobile devices may be transmitting even if you are not making a voice call. Your mobile device is also designed to meet the United States Federal Communications Commission (FCC) guidelines. FCC ratings for your device and more information on SAR can be found at http:/

/transition.fcc.gov/oet/rfsafety/sar.html. The World Health Organization (WHO) has stated that current scientific information does not indicate the need for any special precautions when using mobile devices. If you are interested in reducing your exposure, they recommend you limit your usage or use a hands-free kit to keep the device away from your head and body. For more information and explanations and discussions on RF exposure, go to the WHO website at www.who.int/peh-emf/en. Copyrights and other notices EU Declaration of Conformity Hereby, HMD Global Oy declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the EU Declaration of Conformity can be found at https://

www.nokia.com/en_int/phones/declaration-of-conformity. FCC notice:

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For more info, go to www.fcc.gov/engineering-

technology/electromagnetic-compatibility-division/radio-

frequency-safety/faq/rf-safety. Any changes or modifications not expressly approved by HMD Global could void the users authority to

		frequency	equipment class	purpose
1	2018-06-14	2580 ~ 2610	PCE - PCS Licensed Transmitter held to ear	Original Equipment
2		2412 ~ 2462	DTS - Digital Transmission System
3			JBP - Part 15 Class B Computing Device Peripheral
4		2402 ~ 2480	DSS - Part 15 Spread Spectrum Transmitter
5		5745 ~ 5825	NII - Unlicensed National Information Infrastructure TX
6		13.56 ~ 13.56	DXX - Part 15 Low Power Communication Device Transmitter

Application Forms

app s	Applicant Information
1 2 3 4 5 6	Effective	2018-06-14
1 2 3 4 5 6	Applicant's complete, legal business name	HMD global Oy
1 2 3 4 5 6	FCC Registration Number (FRN)	0025864240
1 2 3 4 5 6	Physical Address	Bertel Jungin aukio 9
1 2 3 4 5 6		Espoo, N/A 02600
1 2 3 4 5 6		Finland

app s	TCB Information
1 2 3 4 5 6	TCB Application Email Address	h******@acbcert.com
1 2 3 4 5 6	TCB Scope	B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
1 2 3 4 5 6		A4: UNII devices & low power transmitters using spread spectrum techniques
1 2 3 4 5 6		A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices

app s	FCC ID
1 2 3 4 5 6	Grantee Code	2AJOT
1 2 3 4 5 6	Equipment Product Code	TA-1075

app s	Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6	Name	R****** C**
1 2 3 4 5 6	Title	Director
1 2 3 4 5 6	Telephone Number	+3933********
1 2 3 4 5 6	Fax Number	+9714********
1 2 3 4 5 6	E-mail	r******@hmdglobal.com

app s	Technical Contact
1 2 3 4 5 6	Firm Name	CTTL-Terminals Test Lab of China Academy of Teleco
1 2 3 4 5 6	Name	X****** Z**
1 2 3 4 5 6	Physical Address	No. 52, Huayuan Bei Road, Haidian District
1 2 3 4 5 6		Beijing, 100191
1 2 3 4 5 6		China
1 2 3 4 5 6	Telephone Number	86-10******** Extension:
1 2 3 4 5 6	Fax Number	86-10********
1 2 3 4 5 6	E-mail	x******@catr.cn

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1 2 3 4 5 6	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2 3 4 5 6	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2 3 4 5 6	If so, specify the short-term confidentiality release date (MM/DD/YYYY format)	07/23/2018
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6	Is this application for software defined/cognitive radio authorization?	No
1 2 3 4 5 6	Equipment Class	PCE - PCS Licensed Transmitter held to ear
1 2 3 4 5 6		DTS - Digital Transmission System
1 2 3 4 5 6		JBP - Part 15 Class B Computing Device Peripheral
1 2 3 4 5 6		DSS - Part 15 Spread Spectrum Transmitter
1 2 3 4 5 6		NII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 6		DXX - Part 15 Low Power Communication Device Transmitter
1 2 3 4 5 6	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	Smart phone
1 2 3 4 5 6	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2 3 4 5 6	Modular Equipment Type	Does not apply
1 2 3 4 5 6	Purpose / Application is for	Original Equipment
1 2 3 4 5 6	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	Yes
1 2 3 4 5 6	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1 2 3 4 5 6	Grant Comments	Output power is ERP for Part 22 and EIRP for Parts 24/27. For satisfying FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 15 mm separation between the device, including its antenna, and the user's body. This device contains functions that are not operational in U.S. and its Territories. Filings under this FCC ID are approved only for U.S. operations. The highest reported SAR for head, body-worn accessory, product specific, and simultaneous transmission exposure conditions are 0.35 W/kg, 1.08 W/kg, 1.34 W/kg and 1.36 W/kg, respectively. This device has 1.4MHz, 3MHz, 5MHz and 10MHz bandwidth modes for LTE Band 5; 5MHz and 10MHz bandwidth modes for LTE Band 7; 5MHz, 10MHz and 20MHz bandwidth modes for LTE Band 38. This device contains Bluetooth, BLE, NFC and WLAN transmitters.
1 2 3 4 5 6		Power output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 15 mm separation between the device and the users body. End users must be informed of the body-worn requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific, and simultaneous transmission exposure conditions are 0.82 W/kg, 0.08 W/kg, 0.18 W/kg and 1.36 W/kg respectively. This device contains Bluetooth, NFC, WLAN 5GHz and GSM/ WCDMA/ LTE transmitters.
1 2 3 4 5 6		This device contains WLAN 2.4GHz, WLAN 5GHz, Bluetooth, BLE, NFC and GSM/ WCDMA/ LTE transmitters.
1 2 3 4 5 6		Power output listed is conducted. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device contains WLAN 2.4GHz, WLAN 5GHz, BLE , NFC and GSM/ WCDMA/LTE transmitters.
1 2 3 4 5 6		Power output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 15 mm separation between the device and the users body. End users must be informed of the body-worn requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific, and simultaneous transmission exposure conditions are 1.10 W/kg, <0.01 W/kg, 0.09 W/kg and 1.36 W/kg respectively. This device supports 20MHz and 40MHz bandwidth modes, and contains WLAN 2.4GHz, Bluetooth, BLE, NFC, GSM/ WCDMA/ LTE transmitters.
1 2 3 4 5 6		This device contains WLAN 2.4GHz, WLAN 5GHz, Bluetooth, BLE and GSM/ WCDMA/ LTE transmitters.
1 2 3 4 5 6	Is there an equipment authorization waiver associated with this application?	No
1 2 3 4 5 6	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2 3 4 5 6	Firm Name	Telecommunications Technology Labs, CAICT
1 2 3 4 5 6	Name	Y****** S**
1 2 3 4 5 6	Telephone Number	8610-******** Extension:
1 2 3 4 5 6	Fax Number	8610-********
1 2 3 4 5 6	E-mail	s******@caict.ac.cn

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	22H	BC	824.2	848.8	0.24	0.1 ppm	300KGXW
1	2	22H	BC	824.2	848.8	0.079	0.1 ppm	300KG7W
1	3	24E	BC	1850.2	1909.8	1.545	0.1 ppm	300KGXW
1	4	24E	BC	1850.2	1909.8	0.435	0.1 ppm	300KG7W
1	5	22H	BC	826.4	846.6	0.101	0.1 ppm	4M17F9W
1	6	22H	BC	829	844	0.074	0.1 ppm	8M99G7D
1	7	22H	BC	824.7	848.3	0.06	0.1 ppm	1M09W7D
1	8	22H	BC	829	844	0.059	0.1 ppm	8M99W7D
1	9	27	BC	2502.5	2567.5	0.118	0.1 ppm	4M50G7D
1	1	27	BC	2510	2560	0.109	0.1 ppm	18M0G7D
1	11	27	BC	2502.5	2567.5	0.118	0.1 ppm	4M47W7D
1	12	27	BC	2510	2560	0.109	0.1 ppm	18M0W7D
1	13	27	BC	2577.5	2612.5	0.037	0.1 ppm	13M5G7D
1	14	27	BC	2580	2610	0.035	0.1 ppm	18M0G7D
1	15	27	BC	2572.5	2617.5	0.032	0.1 ppm	4M50W7D
1	16	27	BC	2580	2610	0.028	0.1 ppm	18M2W7D
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	15C	CC	2402	2480	0.0009
2	2	15C	CC	2412	2462	0.2495
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
3	1	15B	CC
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
4	1	15C	CC	2402.00000000	2480.00000000	0.0048000
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
5	1	15E	CC	5180	5240	0.0262
5	2	15E	CC ND	5260	5320	0.0253
5	3	15E	CC ND	5500	5700	0.0247
5	4	15E	CC	5745	5825	0.023
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
6	1	15C	CC	13.56000000	13.56000000

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: 2BF3R-JD-S1A SHEN ZHEN JAVDUN ZHINENGTECH CO,LTD 2BF3V-X1 Aishang Interactive (Shenzhen) Technology Co., Ltd XUJOADDPD1302 Launch Tech Co., Ltd. 2ABY9CARGO Adam Elements International Co., LTD. 2A5ZP-AIR Lumiring Inc