FCC ID: 2AJOTTA-1339 Smart Phone

Get Started Nokia xx Camera Flash USB connector Microphone Loudspeaker Headset connector Earpiece Front camera Flash Volume keys Power/Lock key TA-1339 EN-LATAM 1. Insert the SIM and memory card 1. Put your fingernail in the back cover opening slot, bend the back cover open, and remove it. 2. Slide the nano-SIM in slot 1 with the contact area face down. If you have a second SIM, slide it in slot 2. Tip: To find out if your phone can use 2 SIM cards, see the label on the sales box. If there are 2 IMEI codes on the label, you have a dual-SIM phone. 3. If you have a memory card, slide it in the memory card slot. 4. Put back the back cover. Use only original nano-SIM cards. Use of incompatible SIM cards may damage the card or the device, and may corrupt data stored on the card. Use only compatible memory cards approved for use with this device. Incompatible cards may damage the card and the device and corrupt data stored on the card. Important: Do not remove the memory card when an app is using it. Doing so may damage the memory card and the device and corrupt data stored on the card. Note: Switch the device off and disconnect the charger and any other device before removing any covers. Avoid touching electronic components while changing any covers. Always store and use the device with any covers attached. 286647793 V1.0 xxxxxxxxxx Both SIM cards are available at the same time when the device is not being used, but while one SIM card is active, for example, making a call, the other may be unavailable. Note: On dual SIM capable devices, both SIM1 and SIM2 slots support 4G networks. However, if your SIM1 and SIM2 are both LTE SIM cards, the primary SIM supports 4G/3G/2G networks, while the secondary SIM can only support 3G/2G. For more information on your SIM cards, contact your service provider. To remove the battery, lift it out. 2. Charge the battery and switch the phone on Plug a compatible charger into a wall outlet, and connect the cable to your phone. Your phone supports the USB micro-B cable. You can also charge your phone from a computer with a USB cable, but it may take a longer time. If the battery is completely discharged, it may take several minutes before the charging indicator is displayed. To switch your phone on, press and hold the power key until the phone vibrates. The phone guides you through the setup. For an online user guide and troubleshooting help, go to www.nokia.com/mobile-support. cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For more info, go to www.fcc.gov/

engineering-technology/electromagnetic-compatibility-division/

radio-frequency-safety/faq/rf-safety. Any changes or modifications not expressly approved by HMD Global could void the users authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device has an electronic label for certification information. To access it, select Settings > System > Certification. 2021 HMD Global. HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of Nokia Corporation. Product and safety info Important: For important info on the safe use of your device and battery, read the Product and safety info booklet before you take your device into use. You can only use your device on the GSM 850, 900, 1800, 1900;

WCDMA 1, 2, 4, 5, 8; LTE 1, 2, 3, 4, 5, 7, 8, 12, 17, 28, 66 networks. You need a subscription with a service provider. Important: 4G/LTE might not be supported by your network service provider or by the service provider you are using when traveling. In these cases, you may not be able to make or receive calls, send or receive messages or use mobile data connections. To make sure your device works seamlessly when full 4G/LTE service is not available, it is recommended that you change the highest connection speed from 4G to 3G. To do this, on the home screen, tap Settings > Network & Internet > Mobile network > Advanced, and switch Preferred network type to 3G. For more info, contact your network service provider. Charge your device with the A806A-050100U-EU1 (EU plug) / A806A-

050100U-UK1 (UK plug) / A18A-050100U-US2 (US plug) / A103A-

050100U-AU2 (Australia plug) / UT-580Z-5100UY (Brazil plug) chargers. HMD Global may make additional battery or charger models available for this device. Charging time can vary depending on device capability. Some of the accessories mentioned in this user guide, such as charger, headset, or data cable, may be sold separately. Electrical Information of the Charger The following electrical information corresponds to the above-

mentioned charger models:

Input: 100 - 240 V, 50 - 60 Hz; 0,2 A Output: 5 V; 1,0 A Charger safety instructions The charger is suitable to be used only with compatible devices. The charger should not be used in extremely high or low temperatures. Ventilation should not be obstructed by covering the charger with magazines, blankets, curtains etc. Open flames, such as candles, should not be placed above the charger. The charger and the wall outlet shall be easily accessible at all times. In case the cable or the plugs are damaged, stop using them. Body-worn Operation; This device was tested for typical body-worn operations with the handset kept 1,0 cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1,0 cm separation distance between the users body and the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this handset model with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this handset model is on file with the FCC and can be found under the FCC ID Search section of www.fcc.gov/oet/ea/ after searching on FCC ID 2AJOTTA-1339. Additional information on Specific Absorption Rates (SAR) can be found on the FCC website at www.fcc.gov/general/radio-

frequency-safety-0. To send data or messages, a good connection to the network is needed. Sending may be delayed until such a connection is available. Follow the separation distance instructions until the sending is finished. During general use, the SAR values are usually well below the values stated above. This is because, for purposes of system efficiency and to minimise interference on the network, the operating power of your mobile is automatically decreased when full power is not needed for the call. The lower the power output, the lower the SAR value. Device models may have different versions and more than one value. Component and design changes may occur over time and some changes could affect SAR values. For more info, go to www.sar-tick.com. Note that mobile devices may be transmitting even if you are not making a voice call. Your mobile device is also designed to meet the United States Federal Communications Commission (FCC) guidelines. FCC ratings for your device and more information on SAR can be found at http:/

/transition.fcc.gov/oet/rfsafety/sar.html. The World Health Organization (WHO) has stated that current scientific information does not indicate the need for any special precautions when using mobile devices. If you are interested in reducing your exposure, they recommend you limit your usage or use a hands-free kit to keep the device away from your head and body. For more information and explanations and discussions on RF exposure, go to the WHO website at www.who.int/peh-emf/en. HAC notice:

The charger requires very low maintenance. If you want to clean it, use a dry cloth or a brush. Your phone is compliant with the FCC Hearing Aid Compatibility requirements. Meaning of the symbols:

For internal use only The charger should not be disposed as unsorted municipal waste. It should be recycled. The surface of the device is nickel-free. Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic stripe cards near the device for extended periods of time, since the cards may be damaged. Note: Pre-installed system software and apps use a significant part of memory space. Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a photo. Certification information (SAR) This mobile device meets guidelines for exposure to radio waves as set forth by the Federal Communications Commission (FCC). Refer to the following. FCC RF Exposure Information Your handset is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientific organization through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1,6 W/kg. The tests are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this handset model as reported to the FCC when tested for use at the ear is 0,74 W/kg, and when worn on the body in a holder or carry case, is 1,16 W/kg. The FCC has adopted HAC rules for digital wireless phones. These rules require certain phones to be tested and rated under the American National Standard Institute (ANSI) C63.19-2011 hearing aid compatibility standards. The ANSI standard for hearing aid compatibility contains two types of ratings:

M-Ratings: Rating for less radio frequency interference to enable acoustic coupling with hearing aids. T-Ratings: Rating for inductive coupling with hearing aids in telecoil mode. Not all phones have been rated. A phone is considered hearing aid compatible under FCC rules if it is rated M3 or M4 for acoustic coupling and T3 or T4 for inductive coupling. These ratings are given on a scale from one to four, where four is the most compatible. Your phone meets the M4/T3 level rating. However, hearing aid compatibility ratings don't guarantee that interference to your hearing aids won't happen. Results will vary, depending on the level of immunity of your hearing device and the degree of your hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs. This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer. Hearing devices may also be rated. Your hearing device manufacturer or hearing health professional may help you find this rating. For more information about FCC Hearing Aid Compatibility, please go to http:/

/www.fcc.gov/cgb/dro. Copyrights and other notices FCC notice:

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not

HMD Global Oy MODEL/MODELO: TA~1339 IMEI 1: XXXXKXXXXKHRXXK Barcode IMEI 2: XXXXXXXHHXXX CODE/CODIGO: XXxx Barcode Designed by HMD Global Oy Bertel Jungin aukio 9 02600 Espoo Finland Made in China Hecho en China FCC ID: 2AJOTTA~1339 nM om 6B

HMD Global Oy Bertel Jungin aukio 9 02600 Espoo, Finland Tel +358 86 4213499 Fax +358 45 2133756 Date: _2022/02/18_ Subject: Confidentiality Request for:

Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Request for Confidentiality 2AJOTTA-1339_ Type of Confidentiality Requested Permanent Short Term Short Term Permanent Permanent Short Term Permanent Short Term Short Term Permanen Exhibit Block Diagrams External Photos Internal Photos BOM Test Setup Photos HMD Global Oy has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

(Signature/Title2) Reza Serafat

(Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of the Nokia Corporation. HMD Global Oy Bertel Jungin aukio 9 02600 Espoo, Finland Tel +358 86 4213499 Fax +358 45 2133756 HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of the Nokia Corporation.

Mobiwire Mobiles (NingBo) Co.,Ltd Product Change Description As the applicant of the below model, [Mobiwire Mobiles (NingBo) Co.,Ltd ] declares that the product, Model name :TA-1339 HardWare:V01B SoftWare: 000T_0_513 SVN: N/A is the variant/ECO/ of the initial certified product, Model name :TA-1339 HardWare:V01 SoftWare: 00WW_0_070 SVN: N/A SOFTWARE MODIFICATIONS:

Protocol Stack changes: No MMS/STK changes: No AGPS/SUPL/DM/FUMO changes: No Java changes: No Other changes detailed: No HARDWARE MODIFICATIONS:

Band changes: No Power Amplifier changes: No Antenna changes: No PCB Layout changes: No Main RF components changes: No Voltage changes: No FM changes: No LCD/ Speaker/ Camera/ Vibrator changes: YesCamera changed from 5M+5M FF to 5M+8M AF Vibrator changes: No Bluetooth changes: No Fingerprint changes: Yes , add fingerprint P/L sensor changes: No SIM card changesNo Other changes detailed: No HCI/SWP/TS 27 Android version changes: No NFC chipset changes: No Other changes detailed: No MECHANICAL MODIFICATIONS:

Use new metal front/back cover or keypad: No Mechanical shell changes: Yes, rear housing and battery cover modified to satisfy fingerprint Other changes detailed: No ACCESSORY MODIFICATIONS:

Battery changes: Yes, the battery changed IC AC Adaptor changes: No Earphone changes: No Other changes detailed: No APPROVED BY:

Company: Mobiwire Mobiles (NingBo) Co.,Ltd Address: A-1,No.999 East Dacheng Road, Fenghua District, Ningbo City, Zhejiang Province, PRC Tel: 0574-59555707 Fax:

Signature:

Date:

HMD Global Oy Bertel Jungin aukio 9 02600 Espoo, Finland Tel +358 86 4213499 Fax +358 45 2133756 Authority to Act as Agent Date: _2022/02/18_ American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

______Shenzhen Academy of Information and Communication Technology______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____(Typically 8 12 months)_____ By:

(Signature1) __GM Operations_________________ Title:

On behalf of: ___HMD Global Oy___ _________Reza Serafat ____________

(Print name) Telephone:

(Company Name) __+393 31 6272922 _ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of the Nokia Corporation.

Tel +358 86 4213499 02600 Espoo Fax +358 45 2133756 Finland HMD Global Oy Bertel Jungin aukio 9 Request for Class II Permissive Change FCC ID: 2AJOTTA-1339 Data: February, 24, 2022 TO: Federal Communication Commission Please be notified that we, the undersigned, HMD Global Oy declare that the reasons for this Class II permissive change are as below:

1. Update Camera from 5M+5M FF to 5M+8M AF. 2. Add fingerprint. Please refer to below form for detailed information:

Item Key Components Deviation Remark Camera 5M+5M FF 5M+8M AF The original Current Fingerprint NA FT9371S6 Camera changed from 5M+5M FF to 5M+8M AF Add fingerprint Thank you. Sincerely, __ ______ Name: Reza Serafat Position: GM, Global Quality & Customer Compliance and Operations E-mail: reza.serafat@hmdglobal.com V1.0

RF_160, Issue 04 Declaration of Authorization We Name:

Address:

Country:

Declare that:

HMD Global Oy Bertel Jungin aukio 902600 EspooFinland Finland Name Representative of agent:

Agent Company name:

Address:

Shennan Road City:

Country Shenzhen China chenliang SAICT Building G,Shenzhen International Innovation Center, No.1006 is authorized to apply for Certification of the following product(s):

Product description: Smart Phone Type designation: TA-1339 Validity/ expiry date:

FCC ID2AJOTTA-1339 on our behalf. Date:

City:

Name:

2021-04-01 Espoo.. Rosario Casillo.. (2) Function:

Director, Technology. Signature:

. Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.

FCC, Request for non-disclosure RF_501, Issue 7 Company Name: HMD Global Oy Address:

City:

Country:

Finland Bertel Jungin aukio 902600 EspooFinland To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: 2AJOTTA-1339 Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):

Internal Photos Users Manual Test Set-up Photos External Photos Justification:

Planned Release Date STC:

(notes 2, 3, 4, 5). If no date is given, 45 days from grant date will be used. Date: 2021/04/01 Name and signature of applicant: Rosario Casillo Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Attestation Letter Federal Communications Commission Authorization and Evaluation Division We, HMD global Oy , declare that the device does not support channel 12 ~ 13 in 2.4 GHz band and any non-US channels in all the operational mode(s) for the following product. Date: April 06, 2021 FCC ID: 2AJOTTA-1339 Product: Smart Phone Model: TA-1339 FCC ID: 2AJOTTA-1339 Sincerely, If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!

__________________ Name: Rosario Casillo Position: Director Technology and Compliance HMD Global Oy V1.0