FCC ID: 2AJOTTA-1481 Smart Phone

Size:

Material:

Colour:

Tolerance:

Forming Method:

File Name Date:

64*120 mm 70g Wood free Blue Pantone 296C 0.5 mm Stapling EN-LATAM_80601498H001_legal_booklet_issue_1 2022.07.05 Cover effect. Back cover effect This Page is Not Printed. Product and safety info EN-LATAM For your safety Read these simple guidelines. Not following them may be dangerous or against local laws and regulations. For further information, read the complete user guide. SWITCH OFF IN RESTRICTED AREAS Switch the device off when mobile phone use is not allowed or when it may cause interference or danger, for example, in aircraft, in hospitals or near medical equipment, fuel, chemicals, or blasting areas. Obey all instructions in restricted areas. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle when driving. Your first consideration while driving should be road safety. INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance. AUTHORIZED SERVICE Only authorized personnel may install or repair this product. BATTERIES, CHARGERS AND OTHER ACCESSORIES Use only batteries, chargers, and other accessories approved by HMD Global for use with this device. Do not connect incompatible products. KEEP YOUR DEVICE DRY If your device is water-resistant, see its IP rating in the device's technical specifications for more detailed guidance. GLASS PARTS The device and/or its screen is made of glass. This glass can break if the device is dropped on a hard surface or receives a substantial impact. If the glass breaks, do not touch the glass parts of the device or attempt to remove the broken glass from the device. Stop using the device until the glass is replaced by authorized service personnel. PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your device near your ear while the loudspeaker is in use. 2 Feature-specific information Parts and connectors Do not connect to products that create an output signal, as this may damage the device. Do not connect any voltage source to the audio connector. If you connect an external device or headset, other than those approved for use with this device, to the audio connector, pay special attention to volume levels. Messaging You can send text messages that are longer than the character limit for a single message. Longer messages are sent as two or more messages. Your service provider may charge accordingly. Characters with accents, other marks, or some language options, take more space, and limit the number of characters that can be sent in a single message. Maps and positioning Contents of digital maps may sometimes be inaccurate and incomplete. Never rely solely on the content or the service for essential communications, such as in emergencies. Flashlight If your phone has a flashlight and you are using it, be careful when touching the LED as it may feel hot. Always switch off the flashlight before putting the phone in your pocket or handbag. Product and safety info Network services and costs Using some features and services, or downloading content, including free items, require a network connection. This may cause the transfer of large amounts of data, which may result in data costs. You may also need to subscribe to some features. Emergency calls Important: Connections in all conditions cannot be guaranteed. Never rely solely on any wireless phone for essential communications like medical emergencies. Before making the call:

Switch the phone on. If the phone screen and keys are locked, unlock them. Move to a place with adequate signal strength. 1. On the home screen, tap

. 2. Type in the official emergency number for your present location. Emergency call numbers vary by location. 3. Tap

. 3 4. Give the necessary info as accurately as possible. Do not end the call until given permission to do so. You may also need to do the following:

If your phone asks for a PIN code, tap Emergency. Switch the call restrictions off in your phone, such as call barring, fixed dialing, or closed user group. If the mobile network is not available, you may also try making an internet call, if you can access the internet. Take care of your device Handle your device, battery, charger and accessories with care. The following suggestions help you keep your device operational. Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits. If your device gets wet, remove the battery if possible, and let the device dry. Do not use or store the device in dusty or dirty areas. Do not store the device in high temperatures. High temperatures may damage the device or battery. Do not store the device in cold temperatures. When the device warms to its normal temperature, moisture can form inside the device and damage it. Do not open the device other than as instructed in the user guide. Unauthorized modifications may damage the device and violate regulations governing radio devices. Do not drop, knock, or shake the device or the battery. Rough handling can break it. Only use a soft, clean, dry cloth to clean the surface of the device. Do not paint the device. Paint can prevent proper operation. Keep the device away from magnets or magnetic fields. To keep your important data safe, store it in at least two separate places, such as your device, memory card, or computer, or write down important info. During extended operation, the device may feel warm. In most cases, this is normal. To avoid getting too warm, the device may automatically slow down, close apps, switch off charging, and if necessary, switch itself off. If the device is not working properly, take it to the nearest authorized service facility. Recycle Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way you help prevent uncontrolled waste disposal and promote the recycling of materials. Electrical and electronic products contain a lot of valuable materials, including metals (such as copper, aluminum, steel, and magnesium) and precious metals (such as gold, silver, and palladium). All materials of the device can be recovered as materials and energy. 4 When this device has reached the end of its working life, all of its materials can be recovered as materials and energy. Recycle packaging and user guides at your local recycling scheme. When you cooperate and deliver all these materials to one of the available collection sites, you contribute in helping the environment and help to ensure the health of future generations. All electrical and electronic products and batteries may contain recyclable metals and other potentially hazardous substances and must be taken to their respective collection sites at the end of their working life. Under no circumstances should you break open a battery or other related materials. Do not dispose of these products as unsorted municipal waste, as this may cause contamination of the environment or risks to human health. All HMD Global products are in compliance with the applicable industry international production standards and to all requirements defined by the competent government agencies. Crossed-out wheeled bin symbol The crossed-out wheeled bin symbol on your product, battery, literature, or packaging reminds you that all electrical and electronic products and batteries must be taken to separate collection at the end of their working life. Do not dispose of these products as unsorted municipal waste: take them for recycling. For info on your nearest recycling point, check with your local waste authority. About Digital Rights Management When using this device, obey all laws and respect local customs, privacy and legitimate rights of others, including copyrights. Copyright protection may prevent you from copying, modifying, or transferring photos, music, and other content. See the online user guide for further information about DRM. Battery and charger info To check if your phone has a removable or non-removable battery, see the Get started guide. Devices with a removable battery Use your device only with an original rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Devices with a non-removable battery Do not attempt to remove the battery or back cover, as you may damage the device. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, to replace the battery, take the device to the nearest authorized service facility. 5 Chargers Charge your device with a compatible charger. Charger plug type may vary. Some of the accessories mentioned in this user guide, such as charger, headset, or data cable, may be sold separately. Battery and charger safety Once charging of your device is complete, unplug the charger from the device and electrical outlet. Please note that continuous charging should not exceed 12 hours. If left unused, a fully charged battery will lose its charge over time. Always keep the battery between 15C and 25C (59F and 77F) for optimal performance. Extreme temperatures reduce the capacity and lifetime of the battery. A device with a hot or cold battery may not work temporarily. Obey local regulations. Recycle when possible. Do not dispose as household waste. Do not expose the battery to extremely low air pressure or leave it to extremely high temperature, for example dispose it in a fire, as that may cause the battery to explode or leak flammable liquid or gas. Do not dismantle, cut, crush, bend, puncture, or otherwise damage the battery in any way. If a battery leaks, do not let liquid touch skin or eyes. If this happens, immediately flush the affected areas with water, or seek medical help. Do not modify, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids. Batteries may explode if damaged. Use the battery and charger for their intended purposes only. Improper use, or use of unapproved or incompatible batteries or chargers may present a risk of fire, explosion, or other hazard, and may invalidate any approval or warranty. If you believe the battery or charger is damaged, take it to a service center or your phone dealer before continuing to use it. Never use a damaged battery or charger. Only use the charger indoors. Do not charge your device during a lightning storm. To unplug a charger or an accessory, hold and pull the plug, not the cord. Additionally, the following applies if your device has a removable battery:

Always switch the device off and unplug the charger before removing the battery. Accidental short-circuiting can happen when a metallic object touches the metal strips on the battery. This may damage the battery or the other object. Small children Your device and its accessories are not toys. They may contain small parts. Keep them out of the reach of small children. Medical devices Operation of radio transmitting equipment, including wireless phones, may interfere with inadequately shielded medical devices'

function. Consult a physician or the medical device's manufacturer to determine if it is adequately shielded from external radio energy. 6 Implanted medical devices To avoid potential interference, manufacturers of implanted medical devices recommend a minimum separation of 15.3 centimeters (6 inches) between a wireless device and the medical device. Persons who have such devices should:

Always keep the wireless device more than 15.3 centimeters (6 inches) from the medical device. Not carry the wireless device in a breast pocket. Hold the wireless device to the ear opposite the medical device. Switch the wireless device off if there is any reason to suspect that interference is taking place. Follow the manufacturer directions for the implanted medical device. If you have any questions about using your wireless device with an implanted medical device, consult your health care provider. Hearing Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety. Some wireless devices may interfere with some hearing aids. Vehicles Radio signals may affect improperly installed or inadequately shielded electronic systems in vehicles. For more info, check with the manufacturer of your vehicle or its equipment. Only authorized personnel should install the device in a vehicle. Faulty installation may be dangerous and invalidate your warranty. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable or explosive materials in the same compartment as the device, its parts, or accessories. Do not place your device or accessories in the air bag deployment area. Potentially explosive environments Switch your device off in potentially explosive environments, such as near gas stations. Sparks may cause an explosion or fire resulting in injury or death. Note restrictions in areas with fuel; chemical plants;

or where blasting operations are in progress. Areas with a potentially explosive environment may not be clearly marked. These usually are areas where you are advised to switch your engine off, below deck on boats, chemical transfer or storage facilities, and where the air contains chemicals or particles. Check with the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) if this device can be safely used in their vicinity. Copyrights and other notices The availability of products, features, apps and services may vary by region. For more info, contact your dealer or your service provider. This device may contain commodities, technology or software 7 subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. The contents of this document and the accompanying Get started guide are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. HMD Global reserves the right to revise this document or withdraw it at any time without prior notice. To the maximum extent permitted by applicable law, under no circumstances shall HMD Global or any of its licensors be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. Reproduction, transfer or distribution of part or all of the contents in this document in any form without the prior written permission of HMD Global is prohibited. HMD Global operates a policy of continuous development. HMD Global reserves the right to make changes and improvements to any of the products described in this document without prior notice. HMD Global does not make any representations, provide a warranty, or take any responsibility for the functionality, content, or end-user support of third-party apps provided with your device. By using an app, you acknowledge that the app is provided as is. Downloading of maps, games, music and videos and uploading of images and videos may involve transferring large amounts of data. Your service provider may charge for the data transmission. The availability of particular products, services and features may vary by region. Please check with your local dealer for further details and availability of language options. Certain features, functionality and product specifications may be network dependent and subject to additional terms, conditions, and charges. All specifications, features and other product information provided are subject to change without notice. Manufacturer and/or importer in the European Union: HMD Global Oy, Bertel Jungin aukio 9, 02600 Espoo, Finland. HMD Global Privacy Policy, available at http://www.nokia.com/

phones/privacy, applies to your use of the device. 2021 HMD Global. HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of Nokia Corporation. Manufacturer's Limited Warranty 1. General HMD Global Oy (hereinafter "Manufacturer") provides this Manufacturer's Limited Warranty ("Warranty") for the genuine Nokia mobile device ("Product") which has been released for sale in Latin America and Caribbean. Even though one or more countries may be mentioned herein, this Warranty is only applicable in the country where the Product was 8 purchased through Manufacturer's authorized sales channels, provided that the Product was intended for sale in that country

("Covered Country"). This Warranty covers and includes any statutory rights under any mandatory consumer protection laws of the Covered Country applicable to you, and also grants you specific, and as the case may be, additional rights, within the limits of what is permissible under such law. This Warranty does not limit the rights you may have under applicable consumer protection laws. You may have other rights based on local laws during or after the Warranty period. These rights are not excluded by this Warranty. The Product and its accessories shall be used in accordance with the instructions provided in the user guides and leaflets that come in the Product package and are also available at www.nokia.com/mobile-

support. 2. Warranty The Warranty period starts on the date the Product is sold to an end user for the first time, as evidenced by the original proof of purchase. Said first purchaser and anyone who subsequently acquires the Product during the original Warranty period will be entitled to the warranty rights. Manufacturer agrees to cover under warranty defects in materials and workmanship employed in Product manufacturing ("Defect") for:

(i) Twelve (12) months for the main device, including non-user replaceable batteries; and

(ii) Six (6) months for all user-replaceable batteries, covers, cables, chargers, headsets and any other accessory included in the sales package of the main device, unless the law requires that the Manufacturer offers a longer period, in which case the Warranty period is extended to cover the minimum period required by the law. The Warranty period described above includes any mandatory Warranty term you may have in the Covered Country. As a consequence, the first month(s) of the Warranty period described above correspond to the mandatory Warranty term in the Covered Country and the remaining months until completion of the period described above correspond to the contractual Warranty term granted by the Manufacturer. During the Warranty period, Manufacturer or its authorized service center will, in a reasonable time, remedy the Defect free of charge by either repairing or replacing the defective Product or accessory or the defective part of it at its option, provided that you have returned the defective Product or accessory to the Manufacturer or its authorized service center before the Warranty period expired. When repairing or replacing your Product or accessory, Manufacturer may use new or re-conditioned parts or Product except where the use of such re-conditioned parts or Product is barred by local law. In case local law should require the end user to be informed about the use of re-conditioned parts or Products, this Warranty document can be considered as the necessary intimation in that regard. In case local 9 law requires consent from the end user for the use of re-conditioned parts or Products, then such parts or Products will not be used till such consent has been obtained. In order to enforce the Warranty, you need to provide the Product, as well as this warranty text duly stamped by the seller, or the invoice, receipt or other type of proof of purchase that contains the specific details of the Product. This Warranty covers all parts and components of the Product, and includes labor costs. Manufacturer will bear the costs of transporting the Products within its authorized service network as part of the fulfilment of Warranty obligations. To the fullest extent permitted by applicable law:

(i) No repair or replacement will renew or extend the Warranty period unless such renewal or extension is mandated by local law, in which case the Warranty period is extended by the minimum time required by law;

(ii) For countries, where such renewal or extension is not mandated by local law, after repair or replacement, the original Product, replacement parts or replacement Products or accessories provided under this Warranty will be covered by this Warranty for the remainder of the original Warranty period or for ninety (90) days from the date the repaired or replacement Product or accessory is returned to you, whichever is longer;

(iii) Repair services will count with ninety (90) days warranty from the day the repaired Product or accessory is returned to you; and

(iv) The Product or all parts of your Product or accessory that Manufacturer has replaced shall become Manufacturer's property. Manufacturer does not warrant that software preinstalled by or on behalf of Manufacturer in the Product (or subsequent updates and upgrades) (together "Manufacturer Software") will meet your requirements, work in combination with any hardware or software not provided by Manufacturer, be uninterrupted or error free or that errors are correctable or will be corrected. For Manufacturer Software-related errors, Manufacturer will make available the latest version of the Manufacturer Software for reinstallation on your Product or, if that would not be possible, another remedy, which in Manufacturer's reasonable discretion, satisfactorily addresses the error. Some Manufacturer Software may be subject to separate license terms that are available with the Software. Please always back up all data and content stored on your Product before taking your Product in for service since service activities will erase all data from your Product. Manufacturer and its authorized service centers are not responsible for the loss the of your data, programs or confidential information. 3. What this Warranty does not cover Manufacturer does not provide any Warranty for the following:

(i) errors or damages caused by:

(a) exposure to any liquid (unless the Product is declared to be water-

resistant under certain conditions as specified by the Manufacturer), 10 to extreme electromagnetic field (such as damages caused by microwave oven), to dampness, to extreme thermal or environmental conditions or to rapid changes in such conditions, corrosion, oxidation, spillage of food or liquid, or to influence from chemical products;

(b) physical damage, cracks, dents or scratches caused by a drop or by external forces occurring in or on the product including but not limited to the cover, display, camera lenses and buttons (unless specified otherwise by the Manufacturer under certain conditions);

(c) using your Product with, or connecting it to, any product, accessory, software, or service not manufactured or supplied by Manufacturer; or chargers, power adaptors or data cables which do not meet the required technical and safety specifications described in the user guide;

(d) any products combined with your Product by a third party;

(e) damage or errors caused by hacking, cracking, viruses, or other malware, or by unauthorized access to services, accounts, computer systems, or networks;

(f) power outages or surges capable of affecting the normal use of the Product; or

(g) other acts beyond Manufacturer's reasonable control.

(ii) If your Product's serial number, the mobile accessory date code, or the IMEI number has been removed, erased, defaced, altered or if these are illegible in any way;

(iii) Any wear and tear;

(iv) Not using your Product in accordance with the user guide;

(v) If your Product, has been opened, repaired or modified by non-

authorized third parties, or repaired with unauthorized spare parts;

(vi) If you have not installed the latest software updates that are publicly available for your Product within a reasonable time of their release; and/or

(vii) This Warranty is not valid outside of the Covered Country and doesn't cover:

(a) User guides; (b) Any third party software, settings, content, data, or links installed or downloaded onto your Product at any time, or Manufacturer and third-party services or enabling clients even if preinstalled by Manufacturer (please read the terms and conditions that may accompany the services as those will define your rights and obligations); (c) reduced charging capacity of the battery resulting from its natural end of Product life, or pixel defects in your Product's display that are within the scope of industry standards; and (d) SIM card and/or any cellular or other networks or system on which your Product operates. You won't be able to enforce this Warranty if you refuse to give possession of the Product to Manufacturer for repair and investigation. If this Warranty does not cover your Product or the issue based on which it requires service, Manufacturer reserves the right to charge for the repair or replacement of your Product, as well as a handling fee. 11 4. Limitation of Manufacturer's liability To the extent permitted by applicable law(s), Manufacturer shall not under any circumstances be liable, either expressly or impliedly, for any

(i) Damages or losses of any kind whatsoever resulting from or relating to loss of, damage to, or corruption of, content or data, or the re-creation or transfer thereof, even if such loss, damage, or corruption was a result of

(a) a Defect in your Product; or

(b) an attempt to repair your Product; and/or

(ii) Loss of profit, productivity, functionality, business, contracts, revenues or anticipated savings, increased costs or expenses, or for any indirect, consequential or special loss or damage. To the extent permitted by applicable law, Manufacturer's liability shall be limited to the purchase value of your Product. The limitations in this clause 4 shall not apply in case of Manufacturer's negligence or intentional misconduct or in case of death or personal injury resulting from Manufacturer's proven negligence. 5. Other important notices For further information related to your Product and how to enforce your Warranty, please visit www.nokia.com/mobile-support. Instructions on how to request repair service and the addresses of the authorized service centers in the Covered Country may also be available on that webpage. Manufacturer reserves the right to make changes to its authorized service centers network at any time. Your Product may contain country-specific elements, including software. The warranty services available in a particular country may be limited to the Product and country-specific elements available in that country. Also, if your Product has been re-exported from its original destination to another country, your Product may contain country specific elements that are not considered a Defect under this Warranty even if those elements or the Product would not be operational. 6. Additional information Manufacturer and Warranty provider: HMD Global Oy (address: Bertel Jungin aukio 9, 02600 Espoo, Finland) Information to be filled in by the seller if required by local law:

Product model and IMEI:

Seller name and address:

Product acquisition and delivery date(s):

End user name and address:

12 13 14 80601498H001 V1.0

Get Started Nokia xx 4 5 6 7 8 9 3 12 2 1 10 11 1. Headset connector 2. Microphone 3. Loudspeaker 4. Camera 5. Flash 6. SIM and memory card slot 7. Front camera 8. Earpiece 9. Microphone 10. Volume keys 11. Power/Lock key, Fingerprint sensor 12. USB connector Important: Do not remove the memory card when an app is using it. Doing so may damage the memory card and the device and corrupt data stored on the card. Both SIM cards are available at the same time when the device is not being used, but while one SIM card is active, for example, making a call, the other may be unavailable. 2. Charge the battery and switch the phone on Plug a compatible charger into a wall outlet, and connect the cable to your phone. Your phone supports the USB-C cable. You can also charge your phone from a computer with a USB cable, but it may take a longer time. If the battery is completely discharged, it may take several minutes before the charging indicator is displayed. To switch your phone on, press and hold the power key until the phone vibrates. The phone guides you through the setup. For an online user guide and troubleshooting help, go to www.nokia.com/mobile-support TA-1481/TA-1475 EN-LATAM 1. Insert the SIM and memory card 1.Open the SIM card tray: push the tray opener pin in the tray hole and slide the tray out. 2. If you have a single-SIM phone, put a nano-SIM card in slot 1 and a memory card in slot 2 on the tray with the contact areas face down. If you have a dual-SIM phone, put a nano-SIM card in slot 1 and either a second SIM or a memory card in slot 2 with the contact areas face down. Tip: To find out if your phone can use 2 SIM cards, see the label on the sales box. If there are 2 IMEI codes on the label, you have a dual-SIM phone. 3. If you have a memory card, put it in the memory card slot. 4. Slide the tray back in. Use only original nano-SIM cards. Use of incompati-

ble SIM cards may damage the card or the device, and may corrupt data stored on the card. If you have an eSIM card instead of a physical SIM card, switch on your phone and follow the instruc-

tions on the phone. To be able to activate your eSIM, you need a Wi-Fi connection. Note that if you have a single-SIM phone, you can only have one SIM card, physical or eSIM, active at a time. If you have a dual-SIM phone, you can have two physical SIM cards or a physical SIM and an eSIM active at a time. For information on eSIM cards and activating them, contact your network opera-

tor. Use only compatible memory cards approved for use with this device. Incompatible cards may dam-

age the card and the device and corrupt data stored on the card. 80601335H001 V1.0 This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer. Hearing devices may also be rated. Your hearing device manufacturer or hearing health professional may help you find this rating. For more information about FCC Hearing Aid Compatibility, please go to http:/

/www.fcc.gov/cgb/dro. This device has an electronic label for certification information. To access it, select Settings > System > Certification. 2022 HMD Global. HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of Nokia Corporation. OZO is a trademark of Nokia Technologies Oy. Snapdragon is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Snapdragon is a trademark or registered trademark of Qualcomm Incorporated. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission. Product and safety info Important: For important info on the safe use of your device and battery, read the Product and safety info booklet before you take your device into use. You can only use your device on the GSM 850, 900, 1800, 1900;

WCDMA 1, 2, 4, 5, 8; LTE 1, 2, 3, 4, 5, 7, 8, 12, 13, 17, 20, 28, 38, 39, 40, 41, 66; 5G NR: n1, n2, n3, n5, n7, n28, n38, n40, n41, n66, n78 networks. You need a subscription with a service provider. Important: 5G might not be supported by your network service provider or by the service provider you are using when traveling. To make sure your device works seamlessly when full 5G service is not available, it is recommended that you change the highest connection speed from 5G to 4G. To do this, on the home screen, tap Settings >

Network & internet > SIMs, and switch Preferred network type to 4G. For more info, contact your network service provider. Your device has an internal, non-removable, rechargeable battery. Do not attempt to remove the battery or back cover, as you may damage the device. To replace the battery, take the device to the nearest authorised service facility. Charge your device with the AD-020 charger. HMD Global may make additional battery or charger models available for this device. Charging time can vary depending on device capability. Some of the accessories mentioned in this user guide, such as charger, headset, or data cable, may be sold separately. When charger is not included in the sales box, charge your device using the data cable (included) and a USB power adaptor (may be sold separately). You can charge your device with third-party cables and power adaptors that are compliant with USB 2.0 or later and with applicable country regulations and international and regional safety standards. Other adaptors may not meet applicable safety standards, and charging with such adaptors could pose a risk of property loss or personal injury. It is recommended to use a 20W USB PD compatible power adaptor with an input of 100-240V~50/60Hz 0.5A and output of 9.0V/2.23A to optimize the charging of your device. Electrical Information of the Charger The following electrical information corresponds to the above-

mentioned charger models:

Input: 100-240V; 50/60Hz; 0,5A Output: 5V, 3,0A; 9V 2,23A; 12V, 1,67A Charger safety instructions is 1.30 W/kg, and when worn on the body in a holder or carry case, is 0.83 W/kg. Body-worn Operation; This device was tested for typical body-worn operations with the handset kept 1.0 cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.0 cm separation distance between the users body and the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this handset model with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this handset model is on file with the FCC and can be found under the FCC ID Search section of www.fcc.gov/oet/ea/ after searching on FCC ID 2AJOTTA-1481 or 2AJOTTA-1475. Additional information on Specific Absorption Rates (SAR) can be found on the FCC website at www.fcc.gov/general/radio-frequency-

safety-0. To send data or messages, a good connection to the network is needed. Sending may be delayed until such a connection is available. Follow the separation distance instructions until the sending is finished. During general use, the SAR values are usually well below the values stated above. This is because, for purposes of system efficiency and to minimise interference on the network, the operating power of your mobile is automatically decreased when full power is not needed for the call. The lower the power output, the lower the SAR value. Device models may have different versions and more than one value. Component and design changes may occur over time and some changes could affect SAR values. For more info, go to www.sar-tick.com. Note that mobile devices may be transmitting even if you are not making a voice call. Your mobile device is also designed to meet the United States Federal Communications Commission (FCC) guidelines. FCC ratings for your device and more information on SAR can be found at http:/

/transition.fcc.gov/oet/rfsafety/sar.html. The World Health Organization (WHO) has stated that current scientific information does not indicate the need for any special precautions when using mobile devices. If you are interested in reducing your exposure, they recommend you limit your usage or use a hands-free kit to keep the device away from your head and body. For more information and explanations and discussions on RF exposure, go to the WHO website at https://www.who.int/health-

topics/electromagnetic-fields#tab=tab_1. The charger is suitable to be used only with compatible devices. The charger should not be used in extremely high or low temperatures. Copyrights and other notices FCC notice:

Ventilation should not be obstructed by covering the charger with magazines, blankets, curtains etc. Open flames, such as candles, should not be placed above the charger. The charger and the wall outlet shall be easily accessible at all times. In case the cable or the plugs are damaged, stop using them. The charger requires very low maintenance. If you want to clean it, use a dry cloth or a brush. Meaning of the symbols:

For internal use only The charger should not be disposed as unsorted municipal waste. It should be recycled. The surface of the device is nickel-free. Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic stripe cards near the device for extended periods of time, since the cards may be damaged. Note: Pre-installed system software and apps use a significant part of memory space. Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a photo. Certification information (SAR) This mobile device meets guidelines for exposure to radio waves as set forth by the Federal Communications Commission (FCC). Refer to the following. FCC RF Exposure Information Your handset is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientific organization through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this handset model as reported to the FCC when tested for use at the ear This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For more info, go to www.fcc.gov/engineering-

technology/electromagnetic-compatibility-division/radio-

frequency-safety/faq/rf-safety. Any changes or modifications not expressly approved by HMD Global could void the users authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. HAC notice:

Your phone is compliant with the FCC Hearing Aid Compatibility requirements. The FCC has adopted HAC rules for digital wireless phones. These rules require certain phones to be tested and rated under the American National Standard Institute (ANSI) C63.19-2011 hearing aid compatibility standards. The ANSI standard for hearing aid compatibility contains two types of ratings:

M-Ratings: Rating for less radio frequency interference to enable acoustic coupling with hearing aids. T-Ratings: Rating for inductive coupling with hearing aids in telecoil mode. Not all phones have been rated. A phone is considered hearing aid compatible under FCC rules if it is rated M3 or M4 for acoustic coupling and T3 or T4 for inductive coupling. These ratings are given on a scale from one to four, where four is the most compatible. Your phone meets the M3/T3 level rating. However, hearing aid compatibility ratings don't guarantee that interference to your hearing aids won't happen. Results will vary, depending on the level of immunity of your hearing device and the degree of your hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.

SIM Tray SIM-Tray IMEI laser engraving Double SIM Single SIM SIM 2/SD SIM 1 30mm 10mm Victor Declety 11 May 2022 Victor Declety 11 May 2022 V001 V002 V003 Apollo Marking DVT V001 Victor Declety 11 MAY 2022

Designed by HMD Global Oy Bertel Jungin aukio 9, 02600 Espoo, Finland Model TA-1481 FCC ID: 2AJOTTA-1481 Made in China Hecho en China

2022-07-15 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: 5G Sub-6GHz HAC Attestation FCC ID: 2AJOTTA-1481 & 2AJOTTA-1475 To Whom It May Concern, We attest the handset as designed is expected to exhibit similar audio intensity levels between a voice call placed over a VoLTE connection and over a 5G Sub-6GHz connection. The combination of ABM1 values from a VoLTE connection and ABM2 values from the 5G Sub-6GHz connection, while maintaining a S+N/N margin of 3dB or greater from the rating threshold, is expected to represent the HAC performance when operating in 5G Sub-6GHz bands. The ABM1 result used in T-coil report Chapter 11 is measured by LTE in OTT mode. Should you have any questions or comments concerning the above, please contact the undersigned. Yours Sincerely, Reza Serafat reza.serafat@hmdglobal.com

02600 Espoo, Fax +358 45 2133756 Tel +358 86 4213499 HMD Global Oy Bertel Jungin aukio 9, Finland HMD global Oy Statement Date: August 4, 2022 We, HMD Global Oy, states that our device with FCC ID: 2AJOTTA-1481 is a multi-band mobile phone which supports GSM : 850, 900, 1800, 1900 WCDMA : 1, 2, 4, 5, 8 LTE: FDD 1,2,3,4,5,7,8,12/17,13,20,28,66 - TDD:38,39,40,41(full) 5G NR Sub 6: TDD: n78, n38, n40,n41(full) 5G NR sub6 FDD: n28, n3, n1, n7, n5, n2, n66 for cellular network. For connectivity functions, it is capable of 2.4GHz WiFi 11b/11g/11n-HT20/11n-HT40, 5GHz WiFi 11a/11n-HT20/11n-HT40, 11ac-VHT20/11ac-VHT40/11ac-VHT80 (5.725 GHz 5.825 GHz frequency range disabled in EU countries area based on geo-information), and Bluetooth 5.1 LE, along with NFC. However, LTE band 40/n40 is not available in US market and Canada market, and will be disabled by software ______________________ Reza Serafat reza.serafat@hmdglobal.com HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of the Nokia Corporation.

02600 Espoo, Fax +358 45 2133756 Tel +358 86 4213499 HMD Global Oy Bertel Jungin aukio 9, Finland HMD global Oy Date: August 5, 2022 Declaration of pre-install of OTT voice service We, [HMD Global Oy], as the manufacturer of FCC ID: 2AJOTTA-1481 Model:TA-1481, declares that this model supports Wi-Fi Calling and only pre-installs Google DUO of OTT service with Android OSand doesnt support any other OTT services. We tested DUO using the software from Google according to KDB 285076 D02v04 Guidance for performing T-Coil tests for air interfaces supporting VOIP to support CMRS based telephone services. 3.4 Air Interfaces / Bands Indicating Operating Modes NA: Not Applicable VO: Voice Only V/D: CMRS and IP Voice Service over Digital Transport DT: Digital Transport

* HAC Rating was not based on concurrent voice and data modes, Non current mode was found to represent worst case rating for both M and T rating HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of the Nokia Corporation. 02600 Espoo, Fax +358 45 2133756 Tel +358 86 4213499 HMD Global Oy Bertel Jungin aukio 9, Finland Note1 = No Associated T-Coil measurement has been made in accordance with 285076 D02 T-Coil testing for CMRS IP Note2= The device have similar frequency in some LTE bands4/66,12/17 since the supported frequency spans for the smaller LTE bands are completely cover by the larger LTE bands, therefore, only larger LTE bands were required to be tested for hearing-aid compliance. ______________________ Reza Serafat reza.serafat@hmdglobal.com HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of the Nokia Corporation.

02600 Espoo, Fax +358 45 2133756 Tel +358 86 4213499 HMD Global Oy Bertel Jungin aukio 9, Finland HMD global Oy Date: July 29, 2022 Declaration of Frequency Stability We [HMD Global Oy] ensure that the product FCC ID: 2AJOTTA-1481, Model: TA-1481meets e-CFR Title 47 section 15.407(g) and KDB 789033 D02v02r01 frequency stability such that the emissions are maintained within the band of operation under all conditions of normal operation as specified in the user's manual. _____________________ Reza Serafat reza.serafat@hmdglobal.com HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of the Nokia Corporation.

02600 Espoo, Fax +358 45 2133756 Tel +358 86 4213499 HMD Global Oy Bertel Jungin aukio 9, Finland HMD global Oy DFS Client Declaration Letter Date: August 4, 2022 Date:2022/8/3 We have declared below featured for device, FCC ID: 2AJOTTA-1481

(1) DFS Device Master Client with Radar detection capability Client without radar detection capability

(2) Active / Passive Scanning, ad hoc mode access point capability Frequency Scanning Plan Ad Hoc Mode Access point WiFi Direct WiFi Direct Band (MHz) Capability Capability Group Owner Group Client 2412 - 2462 Active 5180 5240 Active 5260 5320 Passive 5500 5580 Passive 5660 5700 Passive 5745 - 5825 Active Yes Yes No No No Yes Yes Yes No No No Yes Yes Yes No No No Yes Yes Yes Yes Yes Yes Yes

(3) Country code selection capability to end user-

Yes, No If yes, please explain how it was implemented: (please also help to provide detail of options for each country selection)

(4) Transmission in 5600 MHz to 5650 MHz is notched -

Yes, No

(5) Meet Part 15.202 requirement -

Yes, No A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices. A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(6) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of the Nokia Corporation. 02600 Espoo, Fax +358 45 2133756 Tel +358 86 4213499 HMD Global Oy Bertel Jungin aukio 9, Finland frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply, Not Apply, (If apply, please help to provide explanation on it was implement, and how software was controlled). ______________________ Reza Serafat reza.serafat@hmdglobal.com HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of the Nokia Corporation.