FCC ID: 2AJOTTA-1520 Smart Phone

Product and safety info EN-US For your safety Read these simple guidelines. Not following them may be dangerous or against local laws and regulations. For further information, read the complete user guide. SWITCH OFF IN RESTRICTED AREAS Switch the device off when mobile phone use is not allowed or when it may cause interference or danger, for example, in aircraft, in hospitals or near medical equipment, fuel, chemicals, or blasting areas. Obey all instructions in restricted areas. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle when driving. Your first consideration while driving should be road safety. INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance. AUTHORIZED SERVICE Only authorized personnel may install or repair this product. BATTERIES, CHARGERS AND OTHER ACCESSORIES Use only batteries, chargers, and other accessories approved by HMD Global for use with this device. Do not connect incompatible products. KEEP YOUR DEVICE DRY If your device is water-resistant, see its IP rating in the device's technical specifications for more detailed guidance. GLASS PARTS The device and/or its screen is made of glass. This glass can break if the device is dropped on a hard surface or receives a substantial impact. If the glass breaks, do not touch the glass parts of the device or attempt to remove the broken glass from the device. Stop using the device until the glass is replaced by authorized service personnel. PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your device near your ear while the loudspeaker is in use. Safety and texting while driving Safety should be every driver's first priority. Drivers must obey all local laws that may include restrictions on the use of mobile phones or accessories while driving. If use is legal, always keep your hands 2 free to operate the vehicle while driving and use a hands-free device whenever possible. Suspend calls in heavy traffic or hazardous weather. Get to know your mobile phone and its features and make any necessary information inputs prior to driving. Do not input data or engage in text messaging while driving. Mobile phones should not be used when use may be a distraction to the driver. The Cellular Telecommunications & Internet Association (CTIA) has published further info and tips on safe use of mobile phones at www.ctia.org/consumer-tips, which we encourage you to review. Feature-specific information Parts and connectors Do not connect to products that create an output signal, as this may damage the device. Do not connect any voltage source to the audio connector. If you connect an external device or headset, other than those approved for use with this device, to the audio connector, pay special attention to volume levels. Messaging You can send text messages that are longer than the character limit for a single message. Longer messages are sent as two or more messages. Your service provider may charge accordingly. Characters with accents, other marks, or some language options, take more space, and limit the number of characters that can be sent in a single message. Maps and positioning Contents of digital maps may sometimes be inaccurate and incomplete. Never rely solely on the content or the service for essential communications, such as in emergencies. Flashlight If your phone has a flashlight and you are using it, be careful when touching the LED as it may feel hot. Always switch off the flashlight before putting the phone in your pocket or handbag. Product and safety info Network services and costs Using some features and services, or downloading content, including free items, require a network connection. This may cause the transfer of large amounts of data, which may result in data costs. You may also need to subscribe to some features. Emergency calls Important: Connections in all conditions cannot be guaranteed. Never rely solely on any wireless phone for essential communications like medical emergencies. 3 Before making the call:

Turn the phone on. If the phone screen and keys are locked, unlock them. Move to a place with adequate signal strength. 1. On the home screen, tap

. 2. Type in the official emergency number for your present location. Emergency call numbers vary by location. 3. Tap

. 4. Give the necessary info as accurately as possible. Do not end the call until given permission to do so. You may also need to do the following:

Put a SIM card in the phone. If you don't have a SIM, from the lock screen, tap Emergency call. If you are unable to unlock your device you can still make a call to an emergency number by tapping Emergency call from the lock screen. Switch the call restrictions off in your phone, such as call barring, fixed dialing, or closed user group. If the mobile network is not available, you may also try making an internet call, if you can access the internet. Take care of your device Handle your device, battery, charger and accessories with care. The following suggestions help you keep your device operational. Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits. If your device gets wet, remove the battery if possible, and let the device dry. Do not use or store the device in dusty or dirty areas. Do not store the device in high temperatures. High temperatures may damage the device or battery. Do not store the device in cold temperatures. When the device warms to its normal temperature, moisture can form inside the device and damage it. Do not open the device other than as instructed in the user guide. Unauthorized modifications may damage the device and violate regulations governing radio devices. Do not drop, knock, or shake the device or the battery. Rough handling can break it. Only use a soft, clean, dry cloth to clean the surface of the device. Do not paint the device. Paint can prevent proper operation. Keep the device away from magnets or magnetic fields. To keep your important data safe, store it in at least two separate places, such as your device, memory card, or computer, or write down important info. During extended operation, the device may feel warm. In most cases, this is normal. To avoid getting too warm, the device may 4 automatically slow down, close apps, switch off charging, and if necessary, switch itself off. If the device is not working properly, take it to the nearest authorized service facility. Recycle Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way you help prevent uncontrolled waste disposal and promote the recycling of materials. Electrical and electronic products contain a lot of valuable materials, including metals (such as copper, aluminum, steel, and magnesium) and precious metals (such as gold, silver, and palladium). All materials of the device can be recovered as materials and energy. Crossed-out wheeled bin symbol The crossed-out wheeled bin symbol on your product, battery, literature, or packaging reminds you that all electrical and electronic products and batteries must be taken to separate collection at the end of their working life. Do not dispose of these products as unsorted municipal waste: take them for recycling. For info on your nearest recycling point, check with your local waste authority. About Digital Rights Management When using this device, obey all laws and respect local customs, privacy and legitimate rights of others, including copyrights. Copyright protection may prevent you from copying, modifying, or transferring photos, music, and other content. Battery and charger info Use your device only with an original TN-BL3000R1 rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Chargers Charge your device with the TN-050120U8 charger. Some of the accessories mentioned in this user guide, such as charger, headset, or data cable, may be sold separately. Battery and charger safety Once charging of your device is complete, unplug the charger from the device and electrical outlet. Please note that continuous charging should not exceed 12 hours. If left unused, a fully charged battery will lose its charge over time. Always keep the battery between 15C and 25C (59F and 77F) for optimal performance. Extreme temperatures reduce the capacity and lifetime of the battery. A device with a hot or cold battery may not work temporarily. Obey local regulations. Recycle when possible. Do not dispose as household waste. 5 Do not expose the battery to extremely low air pressure or leave it to extremely high temperature, for example dispose it in a fire, as that may cause the battery to explode or leak flammable liquid or gas. Do not dismantle, cut, crush, bend, puncture, or otherwise damage the battery in any way. If a battery leaks, do not let liquid touch skin or eyes. If this happens, immediately flush the affected areas with water, or seek medical help. Do not modify, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids. Batteries may explode if damaged. Use the battery and charger for their intended purposes only. Improper use, or use of unapproved or incompatible batteries or chargers may present a risk of fire, explosion, or other hazard, and may invalidate any approval or warranty. If you believe the battery or charger is damaged, take it to a service center or your phone dealer before continuing to use it. Never use a damaged battery or charger. Only use the charger indoors. Do not charge your device during a lightning storm. To unplug a charger or an accessory, hold and pull the plug, not the cord. Additionally, the following applies if your device has a removable battery:

Always switch the device off and unplug the charger before removing the battery. Accidental short-circuiting can happen when a metallic object touches the metal strips on the battery. This may damage the battery or the other object. Small children Your device and its accessories are not toys. They may contain small parts. Keep them out of the reach of small children. Medical devices Operation of radio transmitting equipment, including wireless phones, may interfere with inadequately shielded medical devices'

function. Consult a physician or the medical device's manufacturer to determine if it is adequately shielded from external radio energy. Implanted medical devices To avoid potential interference, manufacturers of implanted medical devices (such as cardiac pacemakers, insulin pumps, and neurostimulators) recommend a minimum separation of 15.3 centimeters (6 inches) between a wireless device and the medical device. Persons who have such devices should:

Always keep the wireless device more than 15.3 centimeters (6 inches) from the medical device. Not carry the wireless device in a breast pocket. Hold the wireless device to the ear opposite the medical device. Switch the wireless device off if there is any reason to suspect that interference is taking place. Follow the manufacturer directions for the implanted medical device. 6 If you have any questions about using your wireless device with an implanted medical device, consult your health care provider. Information on health The U.S. Food and Drug Administration (FDA) and the U.S. Federal Communications Commission (FCC) published statements and questions and answers concerning mobile phones and health. HMD Global encourages you to visit these websites for updated information. You can access the FDA website at www.fda.gov/

Radiation-emittingProducts/

RadiationEmittingProductsandProcedures/

HomeBusinessandEntertainment/CellPhones/default.htm and the FCC website at www.fcc.gov/engineering-technology/

electromagnetic-compatibility-division/radio-frequency-safety/

faq/rf-safety. Additional health-related information is available from the World Health Organization (WHO) at www.who.int/mediacentre/

factsheets/fs193/en/ and from The National Cancer Institute ("NCI") at www.cancer.gov/about-cancer/causes-prevention/risk/radiation/

cell-phones-fact-sheet. In the event that you are concerned about possible health effects, the FDA suggests that you limit your own or your children's radio frequency (RF) exposure by limiting the length of calls or by using handsfree devices. Hearing Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety. Some wireless devices may interfere with some hearing aids. Vehicles Radio signals may affect improperly installed or inadequately shielded electronic systems in vehicles. For more info, check with the manufacturer of your vehicle or its equipment. Only authorized personnel should install the device in a vehicle. Faulty installation may be dangerous and invalidate your warranty. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable or explosive materials in the same compartment as the device, its parts, or accessories. Do not place your device or accessories in the air bag deployment area. Potentially explosive environments Switch your device off in potentially explosive environments, such as near gas stations. Sparks may cause an explosion or fire resulting in injury or death. Note restrictions in areas with fuel; chemical plants;

or where blasting operations are in progress. Areas with a potentially explosive environment may not be clearly marked. These usually are areas where you are advised to switch your engine off, below deck on boats, chemical transfer or storage facilities, and where the air contains chemicals or particles. Check with the manufacturers of 7 vehicles using liquefied petroleum gas (such as propane or butane) if this device can be safely used in their vicinity. Certification information (SAR) This mobile device meets guidelines for exposure to radio waves as set forth by the Federal Communications Commission (FCC). Refer to the following. FCC RF Exposure Information Your handset is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientific organization through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless handsets employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model handset as reported to the FCC when tested for use at the ear is 1.03 W/kg, and when worn on the body in a holder or carry case, is 1.35 W/kg. Body-worn Operation; This device was tested for typical body-worn operations with the handset kept 1.5 cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1.5 cm separation distance between the users body and the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The FCC has granted an Equipment Authorization for this model handset with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model handset is on file with the FCC and can be found under the FCC ID Search section of www.fcc.gov/oet/ea/ after searching on FCC ID 2AJOTTA-1520. Additional information on Specific Absorption Rates (SAR) can be found on the FCC website at www.fcc.gov/general/radio-frequency-

safety-0. To send data or messages, a good connection to the network is needed. Sending may be delayed until such a connection is available. Follow the separation distance instructions until the sending is finished. During general use, the SAR values are usually well below the values stated above. This is because, for purposes of system efficiency and to minimize interference on the network, the operating power of your mobile is automatically decreased when full power is not needed for the call. The lower the power output, the lower the SAR value. 8 Device models may have different versions and more than one value. Component and design changes may occur over time and some changes could affect SAR values. For more info, go to www.sar-tick.com. Note that mobile devices may be transmitting even if you are not making a voice call. Your mobile device is also designed to meet the United States Federal Communications Commission (FCC) guidelines. FCC ratings for your device and more information on SAR can be found at http://

transition.fcc.gov/oet/rfsafety/sar.html. The World Health Organization (WHO) has stated that current scientific information does not indicate the need for any special precautions when using mobile devices. If you are interested in reducing your exposure, they recommend you limit your usage or use a hands-free kit to keep the device away from your head and body. For more information and explanations and discussions on RF exposure, go to the WHO website at www.who.int/peh-emf/en. FCC notice:

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For more info, go to www.fcc.gov/

engineeringtechnology/electromagnetic-compatibility-division/

radiofrequency-safety/faq/rf-safety. Any changes or modifications not expressly approved by HMD Global could void the users authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help HAC notice:

Your phone is compliant with the FCC Hearing Aid Compatibility requirements. The FCC has adopted HAC rules for digital wireless phones. These rules require certain phones to be tested and rated under the American National Standard Institute (ANSI) C63.19-2011 hearing aid compatibility standards. The ANSI standard for hearing aid compatibility contains two types of ratings:

9 M-Ratings: Rating for less radio frequency interference to enable acoustic coupling with hearing aids. T-Ratings: Rating for inductive coupling with hearing aids in telecoil mode. Not all phones have been rated. A phone is considered hearing aid compatible under FCC rules if it is rated M3 or M4 for acoustic coupling and T3 or T4 for inductive coupling. These ratings are given on a scale from one to four, where four is the most compatible. Your phone meets the M4/T3 level rating. However, hearing aid compatibility ratings don't guarantee that interference to your hearing aids won't happen. Results will vary, depending on the level of immunity of your hearing device and the degree of your hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs. This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer. Hearing devices may also be rated. Your hearing device manufacturer or hearing health professional may help you find this rating. For more information about FCC Hearing Aid Compatibility, please go to http:/

/www.fcc.gov/cgb/dro. This device has an electronic label for certification information. To access it, select Settings > System > Certification. Copyrights and other notices The availability of products, features, apps and services may vary by region. For more info, contact your dealer or your service provider. This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. The contents of this document and the accompanying Get started guide are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. HMD Global reserves the right to revise this document or withdraw it at any time without prior notice. To the maximum extent permitted by applicable law, under no circumstances shall HMD Global or any of its licensors be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. 10 Reproduction, transfer or distribution of part or all of the contents in this document in any form without the prior written permission of HMD Global is prohibited. HMD Global operates a policy of continuous development. HMD Global reserves the right to make changes and improvements to any of the products described in this document without prior notice. HMD Global does not make any representations, provide a warranty, or take any responsibility for the functionality, content, or end-user support of third-party apps provided with your device. By using an app, you acknowledge that the app is provided as is. Downloading of maps, games, music and videos and uploading of images and videos may involve transferring large amounts of data. Your service provider may charge for the data transmission. The availability of particular products, services and features may vary by region. Please check with your local dealer for further details and availability of language options. Certain features, functionality and product specifications may be network dependent and subject to additional terms, conditions, and charges. All specifications, features and other product information provided are subject to change without notice. Manufacturer and/or importer in the European Union: HMD Global Oy, Bertel Jungin aukio 9, 02600 Espoo, Finland. HMD Global Privacy Policy, available at http://www.nokia.com/

phones/privacy, applies to your use of the device. 2022 HMD Global. HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of Nokia Corporation. Manufacturer's Limited Warranty HMD Global Oy provides a Manufacturer's Limited Warranty

("Warranty") for each genuine device (the "Product") and related Accessories (as defined in Section 2 of the Warranty) designated for sale in the United States of America and Canada. The complete Warranty document is available at the following link and can be accessed by entering your device model number and selecting the applicable country and language. https://www.nokia.com/phones/en_us/support/topics/warranty-

finder Manufacturer's Address:

HMD Global Oy, Bertel Jungin aukio 9, 02600 Espoo, Finland United States: HMD America, Inc., 1200 Brickell Avenue, Suite 510, Miami, FL 33131. Canada: HMD America, Inc., 1200 Brickell Avenue, Suite 510, Miami, FL 33131. 11

Included in this package:

Activation card Quick Start Guide About Your Phone booklet Phone Battery Battery Cover Charger USB-C Cable Initial Phone Setup:

Your phone already has a SIM card installed. Your phones battery may not be fully charged. Use the USB-C Cable and charger included in your package to charge your phone fully before the first use. To turn your phone ON/OFF, press and hold the Power/Lock button. Set up your Google Account:

During your initial phone setup you will be prompted to log into your Google account. You may skip this step and return to it using the steps below. 1. Tap Settings > Passwords & accounts > Add account > Google. You will be asked to confirm your phone lock method if one has been set up. 2. Type in your Google account credentials and tap Next, or, to create a new account, tap Create account. 3. Follow the instructions on your phone. Security Settings:

Set a screen lock During your initial phone setup you will be prompted choose a screen lock option. You may skip this step and return to it using the steps below. 1. Tap Settings > Security > Screen lock. 2. Choose the type of lock and follow the instructions on your phone. Unlock your phone:

Press the Power/Lock button and enter your screen lock. Set up face authentication 1. Tap Settings > Security > Face Unlock. 2. Select what backup unlocking method you want to use for the lock screen and follow the instructions shown on your phone. Keep your eyes open and make sure your face is fully visible and not covered by any object, such as a hat or sunglasses. Unlock your phone with your face To unlock your phone, just turn your screen on and look at the camera. Quick Start Guide Nokia XX N152DL TN-BCR-V590 Make and Receive Calls:

1. Tap

. 2. Tap and type in a number, or tap and select a contact you want to call. 3. Tap

. Answer a call To answer a call when your screen is unlocked, tap ANSWER. To answer a call when your screen is locked, swipe up. Add a contact 1. Tap Contacts >

. 2. Fill out the information. 3. Tap Save. Voicemail Setup:

For instructions on how to set up voicemail, contact your service provider. When you have new voice mail appears in the status bar. Swipe down and tap the notification to listen to the voicemail. Text and Picture Messaging:

1. Tap Messages. 2. Tap Start chat. 3. To add a recipient, tap

, type in their number,

. To add a recipient from your existing and tap contacts, start typing their name, once the contact list appears tap on the desired contact name. 4. To add more recipients, tap the recipients, tap Next. After choosing all 5. Write your message in the text box. 6. To add a photo, tap and tap photo, or tap Gallery and select an existing photo. to take a new 7. Tap

. Notifications and Quick Settings:

When you receive new notifications, such as messages or missed calls, icons appear at the top of the screen. To access your notifications, swipe down from the top of the screen. To close the view, swipe up on the screen. To activate a feature, swipe down from the top of the screen and choose the quick setting. To see more icons, drag the quick settings menu down. Turn on Wi-Fi:

1. Tap Settings > Network & internet > Wi-Fi. Bluetooth Connectivity:

1. Tap Settings > Connected devices > Connection Notification and Status Icons:

Bluetooth connection is on 2. Switch Use Wi-Fi ON. 3. Select the connection you want to use. Using your Mobile Internet:

4. Tap Chrome. 5. Write a search word or a web address in the search field. 6. Tap

, or select from the proposed matches. preferences > Bluetooth. 2. Switch Use Bluetooth to ON. 3. Make sure the device you are pairing to is turned on. You may need to start the pairing process from the other device. For details, refer to the user guide for the other device. 4. Tap Pair new device and tap the device you want to pair with from the list of discovered Bluetooth devices. 5. You may need to type in a passcode. For details, refer to the user guide for the other device. Wi-Fi is on Airplane mode is on Battery status Regulatory Agency Information FCC ID Max. SAR (W/kg) - Head Max. SAR (W/kg) - Body HAC (Hearing Aid Compatible) &

Rating 2AJOTTA-1520 1.03 W/kg 1.35 W/kg M4/T3 HMD Global Oy is the exclusive licensee of the Nokia brand for phones & tablets. Nokia is a registered trademark of Nokia Corporation. Google and other related marks and logos are trademarks of Google LLC. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by HMD Global is under license.

HMDGlobalOy Finland BertelJunginaukio9Tel+3588642134991(1) 02600EspooFax+358452133756 2AJOTTA-1520 Type Label Location The device has a type label under back cover:

. This device also has an electronic label for certification information. To access it, select Settings > System > Certification. Exhibit 01 Type Label Location FCC ID: 2AJOTTA-1520

02600 Espoo, Finland HMD Global Oy Bertel Jungin aukio 9 Fax +358 45 2133756 Tel +358 86 4213499 Attestation Letter Date: January 11, 2022 Federal Communications Commission Authorization and Evaluation Division FCC ID: 2AJOTTA-1520 We, HMD global Oy, declare that the device does not support channel 12 ~ 13 in 2.4 GHz band and any non-US channels in all the operational mode(s) for the following product. Product: Smart Phone Model: N152DL FCC ID: 2AJOTTA-1520 If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!

Sincerely, __________________ Name: Reza Serafat Position: GM, Global Quality & Customer Compliance HMD Global Oy V1.0

02600 Espoo, Finland HMD Global Oy Bertel Jungin aukio 9 Fax +358 45 2133756 Tel +358 86 4213499 Authority to Act as Agent Date: January 11, 2022 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

______CTTL-Terminals Test Lab of China Academy of Information and Communication Technology______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: _____(Typically 8 12 months)_____ By:

Title:

On behalf of: ________HMD Global Oy____________ Telephone:

___________ Reza Serafat______

(Print name) __________________________ ____GM, Global Quality & Customer Compliance_____ ____+491735287964______

(Company Name)

(Signature1) 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 053019 12

THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD Request for Confidentiality Date: January 11, 2022 Subject: Confidentiality Request for: ______2AJOTTA-1520_____ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent *2 Permanent Permanent Permanent Permanent Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual ______HMD Global Oy_____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___180___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By: GM, Global Quality & Customer Compliance

(Signature/Title3) _____Reza Serafat_____________

(Print name) 2 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 053019 12

02600 Espoo, Finland Fax +358 45 2133756 Bertel Jungin aukio 9 Tel +358 86 4213499 HMD Global Oy DFS Client Declaration Letter Date:21/01/2022 We have declared below featured for device, FCC ID: 2AJOTTA-1520 IC: N/A

(1) DFS Device Master Client with Radar detection capability Client without radar detection capability Frequency Band (MHz) 2412 - 2462 5180 5240 5260 5320 5500 5580 5660 5700 5745 - 5825 Active and Passive Active and Passive Passive Passive Passive Active and Passive No No No No No No

(2) Active / Passive Scanning, ad hoc mode access point capability Scanning Plan Ad Hoc Mode Capability Access point Capability WiFi Direct Group Owner WiFi Direct Group Client Yes Yes No No No Yes Yes Yes No No No Yes Yes Yes Yes Yes Yes Yes

(3) Country code selection capability to end user-

If yes, please explain how it was implemented: (please also help to provide detail of options for each country selection) No Yes,

(4) Transmission in 5600 MHz to 5650 MHz is notched -

Yes, No

(5) Meet Part 15.202 requirement -

Yes, No A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices. A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(6) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment V1.0 02600 Espoo, Finland Fax +358 45 2133756 Bertel Jungin aukio 9 Tel +358 86 4213499 HMD Global Oy classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply, Not Apply, (If apply, please help to provide explanation on it was implement, and how software was controlled). ____________________________ Printed Name: Reza Serafat Position: GM, Global Quality & Customer Compliance Company: HMD Global Oy Signature V1.0