HOLO-100 USER MANUAL SAFETY WARNINGS DO NOT TOUCH THIS DEVICE WHEN IT IS IN OPERATION! YOU WILL BE INJURED DUE TO ANY VIOLATION OTHERWISE!
3D Hologram Display Solutions Hologruf, Inc. Cary, North Carolina, USA ATTENTION: Do not disassemble the device, nor replace the TF card without permission! Any violation will void manufacturers warranty. For safety and protection purposes during the transportation, please use the following recommended couriers:
Product instruction The Holo-100 is one of Hologruf displays empowered by a fully-patented Persistence of Vision (POV) technology that rotates images or videos through one belt of ultra-high-density LED lights and presents in 3D hologram visual effects. This device comes with the characters of ultra-thin exterior design, ultra-low power consumption, ultra-high attractiveness, and design for portable. Product view Device with an acrylic cover Device without the cover Description of back interfaces 1 2 Indicator light Settings button 3 4 5 Slave interface2 Slave interface1 Power interface 1 2 3 4 Indicator light: Indicates the power, ON/OFF, Mode-switching and so on. Setting button: Switching Mode, Pairing remote control . Slave interface: Used in slave mode (See "Slave mode") Power interface: Plug in the power adapter. Installation instruction Holo-26 and Holo-65 displays can be installed on wall. 1 1 Wall-hung fixing part Installation diagram Mounting parts You need expansion screws or common screws to install the mounting parts on the wall first prior to mounting the display to the wall. You need three gaskets between the wall and mounting parts to minimize any potential movement of the mounting part after the installation of the display. Display Installation Slide down the metal bracket behind the display to insert into the mounting parts to complete the display installation on the wall. 2 PC Applicaiton for device conrol &
content management Operation 1 Download software Download the PC software from http://www.hologruf.com HOLOGRUF The device is not connected, please check the network 2 off on The device is not connected SD card remaining capacity: 4G Connect the device Playlist Screen brightness Timing Model Select the model Connect the device Inquire malfunction Install software Download the software package, unzip file PC_Hologruf+version No.zip, double click POV.exe to run the schedule manager, and it will prompt you to check network connection. HOLOGRUF The device is not connected, please check the network 3 off on The device is not connected SD card remaining capacity: 4G Connect the device Playlist Screen brightness Timing Model Holo-65 Connect the device Inquire malfunction Connect the device PC needs to be connected to the Hologruf device via WiFi. Select the device model to connect the device,if it displays connection failed, click the button Inquire malfunction to check the error. 4 ON/OFF Click the power ON button, the device will be turned on and start to rotate. Click the OFF button, the device stops from the rotation,and shutdown completely. You can also use the remote control to operate. off on The device is connected SD card remaining capacity: 4G HOLOGRUF 5 off on The device is connected SD card remaining capacity: 4G Connect the device Playlist Screen brightness Timing Edit Add Up Down Empty File Name xxx.mp4 xxx.jpg xxx.mp4 Size 1.1M 1.1M 1.1M Cycles Operation 1 1 1 Playlist Edit 1 2 Add 3 Up 4 5 6 Down Delete Empty Select the corresponding playback file, click the Edit button, modify the repeat times. Click the Add button, you will see the select option, select the content you want to play. Select the corresponding play file, click the Up button, move the play file Select the corresponding play file, click the Down button, move the play file. Select the content you want to delete in the clip list, and click the Delete icon. Click the Empty button,then you can empty all of the contents in the list. Screen brightness 7 HOLOGRUF 6 off on The device is connected SD card remaining capacity: 4G Connect the device Playlist Screen brightness Timing Screen brightness Move the bar indicator to adjust the brightness. HOLOGRUF 7 off on The device is connected SD card remaining capacity: 4G Connect the device Playlist Screen brightness Timing Timing Timing start-up 0 0 0 0 0 0 Timing shutdown 0 9 2 1 0 0 Timing Enter your schedule to turn on or turn off the Hologruf display. The Hologruf Mobile APP for device control &
content management Operation 1 Software downloads Download the Hologruf iPhone app directly from Apple app store. Also the Hologruf Android phone app can be downloaded directly from the Google Play app store. 2 Wifi connection Power on the Hologruf device, and wait no longer than 3 mintues, you should be able see the device shows up on the Wi-Fi list, being listed as e.g. Hologruf-xxxx. Type in the Wi-Fi password to connect securely. 3 Select the device model Click the Settings button in the upper right corner of the home page to select the type of device. Return Setting Device Model Complete Holo-40/ Holo-100 Click to select your device modelHolo-26/ Holo-65 4 Connect device After connecting to the Hologruf device via Wi-Fi, click "ON" to turn on the device. The deviceis is connected off on Upload Video and Image The device is connected 5 Open the playlist, choose
,click the upload button to select the file, enter the file name and click OK. Playlist off on xxxx.mp4 Cycles 1 Empty the playlist 6 Empty the playlist : Click the emptying button The device is connected off on Playlist xxxx.mp4 Cycles 1 7 1 8 Delete single file:
Left slide the corresponding file, the Delete button will appear, click the button to complete xxxx.mp4 xxxx.mp4 Cycles1 Cycles4 xx.mp4 Cycles6 xxxx.mp4 Cycles10 xxxx.mp4 xxxx.mp4 Cycles1 Cycles4 xx.mp4 Cycles6 xxxx.mp4 Cycles10 File Name: xxxx.mp4 Cycles Cancel OK Setting repeat times of playing the file Left slide the corresponding file, the Edit button will appear, click to edit dialog box (Note: 0 stands for a single file loop) FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.