ENTERPRISE 3d HOLOGRAM SAFETY WARNINGSDO NOT TOUCH THIS DEVICE WHEN IT IS IN OPERATION! YOU WILL BE INJURED DUE TO QUICKLY MOVING PARTS! Hologruf, Inc.3D Hologram Display SolutionsCary, North Carolina, USA2 For safety and protection purposes during the transportation, please use the following recommended couriers:ATTENTION: DO NOT disassemble the device, nor remove the SD/TF card at anytime! Any violation will void manufacturers warranty. 3 4The Holo-65X is one of Hologruf displays empowered by a fully-patented Persistence of Vision (POV) technology that rotates images or videos through one belt of ultra-high-density LED lights and presents in 3D hologram visual effects. This device comes with the characters of ultra-thin exterior design, ultra-low power consumption, ultra-high attractiveness, and design for portable.WELCOME TO THE FUTUREPRODUCT DESCRIPTION 5 Settings buttonPower interfaceLink Cable In/Out Reset Indicator Light Indicator light: Indicates the power, ON/OFF, Mode-switching and so on.Reset button: Switching Mode, Pairing remote control .Setting Button: Switching Mode, Pairing remote control Multi-Link interface: Used in slave mode (See "Slave mode")Power Interface: Plug in the power adapter.3145212345PRODUCT CONNECTION Please note: Verify funtionality from the device before launching the application.Power on the unit and note the units WiFi SSID.Go to the enabled WiFi settings of your mobile device.Link to the units exact SSID. (Case sensitive)Enter the password to connect the device.Verify the connection status between connected devices.Verify funtionality from the device application.123456Connect power: 1After connecting the power adapter to the device, you will see the LED lights lit up, also the indicator light on the back panel will be on in red.2Refer to your mobile device Wifi settings for details connecting to wireless networks.Ensure that your mobile device is not set to automatically connect to other nearby WiFi networks in order to maintain 7Power interface1WIFI SETUP HOLO-65X OPERATION 3 4 Play contents To play a different content:
Point the remote control to the display, and press >> to play the next content from the playlist. Point the remote control to the display, and press << to play the previous content from the playlist. Host vs. Slave mode The display can be set to Host mode or Slave mode. By default, the host mode displays the content as a single device. While in the slave mode, the display needs to be connected with another display that is in the host mode. In such networking setup, all displays interconnected can be used to present a bigger display area. The display can not be used alone, nor be controlled by a remote control if this display is in the slave mode. 1. Change the mode When the display is standby, press and hold the setting button on the backplane. When the indicator light is on in red/green, the display is in the host mode. When the indicator light is on in green, the display is in the slave mode. When indicator light is on in blue, cloud mode. 2. Networking To set up a networking using multiple Hologruf displays, connect these displays as follows:
Link-cable/out of display #1 (in host mode) is connected to Link-cable/in of display #2 (in slave mode). Link-cable/out of display
#2 is connected to Link-cable/in of display #3 (in slave mode), and so on. Once this networking setup is completed, only the display #1 in the host mode can be controlled. 8 9HOLO-65X OPERATION Four displays networking example6Hologruf Mobile AppThe Hologruf mobile app (iPhone and Android apps) is dedicated for controlling (turn on/off) the Hologruf displays and managing content playing (content uploading, deletion, playlist, and etc.). host modeslave modeslave modeslave mode 11Holo-65X displays can be installed on wall.Wall-hung fixing partInstallation diagramMounting parts1You need expansion screws or common screws to install the mounting parts on the wall first prior to mounting the display to the wall. You need three gaskets between the wall and mounting parts to minimize any potential movement of the mounting part after the installation of the display.12Display InstallationSlide down the metal bracket behind the display to insert into the mounting parts to complete the display installation on the wall. MOUNT INSTALLATION 12PC APPLICATION PC applicaitonfor device control & content management 13PC APP OPERATION 2Install software Download the software package, unzip file Hologruf-Win-Installer, double click POV.exe to run the schedule manager, and it will prompt you to check network connection. 1Download softwareDownload the PC software from our official website! Download link available at www.hologruf.com/softwareoff 143Connect the devicePC needs to be connected to the Hologruf device via WiFi. Select the device model to connect the device,if it displays connection failed, click the button Inquire malfunction to check the error.4ON/OFFClick the power ON button, the device will be turned on and start to rotate. Click the OFF button, the device stops from the rotation,and shutdown completely. You can also use the remote control to operate.onoffSD card remaining capacity: 4GThe device is connectedPC APP OPERATION 15Playlist5onSelect the corresponding play file, click the Up button, move the play fileClick the Add button, you will see the select option, select the content you want to play.Select the corresponding playback file, click theEdit button, modify the repeat times.Select the corresponding play file, click the Downbutton, move the play file.Select the content you want to delete in the clip list, and click the Delete icon.Click the Empty button,then you can empty all of the contents in the list.EditAddUp123Down4DeleteEmpty56PC APP OPERATION 16PC APP OPERATION 6Screen brightnessMove the bar indicator to adjust the brightness.7TimingEnter your schedule to turn on or turn off the Hologruf display. 17The Hologruf Mobile APPfor device control &content managementMOBILE APP CONTROL 18MOBILE APP CONTROL 1Software downloadsDownload the Hologruf iPhone app directly from Apple app store. Also the Hologruf Android phone app can be downloaded directly from the Google Play app store.2Wifi connectionPower on the Hologruf device, and wait no longer than 3 mintues, you should be able see the device shows up on the Wi-Fi list, being listed as e.g. Hologruf-xxxx. Type in the Wi-Fi password to connect securely.3After connecting to the Hologruf device via Wi-Fi, click "ON" to turn on the device.Connect device4onoff5Open the playlist, choose ,click the upload button to select the file, enter the file name and click OK.Upload Video and ImageThe deviceis is connected Operation 19Left slide the corresponding file, the Delete button will appear, click the button to complete Delete single file: 7Setting repeat times of playing the fileLeft slide the corresponding file, the Edit button will appear, click to edit dialog box (Note: 0 stands for a single file loop)8MOBILE APP CONTROL FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.