FCC ID: 2AVNC-NUI-7050 OTT BOX

CGNTV

(CONTENTS) 1. (PRECAUTIONS).2 2. (OPERATING INSTRUCTION &

ACCESSORIES) ..4 3. (REMOTE CONTROLLER) ....5 4. (PART NAME)...6 5. (INITIAL INSTALLMENT).....7

[ (initiation) / WIFI / (ETHERNET)]

6. (BASIC OPERATION) ...9 7. (MENU).11 1) (SCHEDULE) 2) (SPONSOR) 3) (Configuration)

[Language / Image Settings / Style / Clock / Network System Information / Factory Reset]

8. (SPECIFICATION)....18 9. FCC Statement.........19

(Safety Instructions and Precautions)

, . Avoid placing heavy things and blocking ventilation passage.

(Passage blocking can cause fire)

. Avoid scrubbing the surface with Benzene or Volatile gasoline. Color can be damaged.

Leave the power and the Ethernet cable off for the long absence or during thunder storm.

, . Avoid dropping and damaging Remote Control Unit. If there is smoke or buring smell, turn off & un-plug the set immediately. Contact your local repair center for advice. Avoid place the set on slippery and slant surface. Keep away from the water. Clear off the dust. Dust or Metallic particles inside the set can cause fire and electric shock. Avoid disassembling and assembling. Do not open the set. Do not snatch the cable to plug out. Do not move the set while power cord is plugged in. Keep the distance from Magnetic items and Audio Speaker.

. Place the set with the good ventilation and away from the direct sunlight and humidity. 40 5 . Avoid the temperature of over 40 or below 5. 1. (OPERATING INSTRUCTIONS) 1) (OPERATION MODE -LED )

2) (STANDBY MODE - LED )

3) , ()

. 1) Operation mode (OPERATION MODE -LED Green)

- After connecting the product, press the power button to execute the operation mode. 2) Standby mode (STANDBY MODE - LED Red)

- Change to Standby mode by pressing the Power button again in Operation Mode. 3) If you do not want to watch, use standby mode and do not disconnect the power supply (adaptor). And the Internet should be connected all the time 2. (Accessories) 1) HDMI Cable 2) (Remote Control) 3) (Operating instruction) 4) (Adaptor) 3. (REMOTE CONTROL) 1. (Power) 2. (SPONSOR) 3. (BACKSPACE) 4. (HOME / MENU) 5. (EPG) 6. (Navigation Key) 7. (OK: Select ) 8. (Volume) 9. (CH: Channel up and down) 10. (Audio Mode) 11. (MUTE) 12. (LIVE CH ) 13. (VOD) 14. (Numeric Keys) 15. / (Function Keys) 4. (PART NAME)

(FRONT VIEW)

(POWER) LED (/ ) 1 2 3 4 5

(BACK VIEW) Item Description 1. A/V OUT Port

/( AUDIO / VIDEO) 2. HDMI Port TV or PC 3. USB Port USB memory / USB cable 4. ETHERNET Port LAN 5. DC 12V IN Connect DC Adaptor. 5. (Initial installment)

, . When the set-top box boots, the logo screen is displayed.

Booting]

[ / Initial Installment]

.. When the set-top box boots, the logo screen is displayed. Select the language. Select a time zone for the current region WIFI ,

(AP) . For WIFI connections, select the network

(AP) to connect to

[WIFI ]

WIFI ,

(AP) . For WIFI connections, select the network

(AP) to connect to

(AP) , Enter . WIFI

. If you select Network (AP), insert the password and press Enter to try connecting. Make sure that you are connected to the top of the WIFI screen.

[ / ETHERNET]

Auto Manual

. Auto IP

, Manual IP

.. Select Auto or Manual for Ethernet setup. Automatically obtains an IP for Auto or goes to the IP settings screen for Manual IP OK

. Navigate to the tab to set up the IP and press the OK button. IP RCU OK

. Insert the corresponding IP and press the OK button IP, , , DNS

. The IP address, subnetmask, gateware, and DNS servers are also set.

, OK

. Once the setup has been completed, press OK or the next button to go to the action screen. 6. (Basic Operation) 1)

-. (0~9) .

-. OK . 2) 3)

-. , . 4) 5) 6) 7) ,

-. OK .

-. CGNTV , .

-. , . 1) To select a channel

-. Press the channel (+/-) button to select the desired channel.

-. Use the number (0-9) buttons to select the channel number directly.

-. On the Channel Guide screen, use the orientation button and OK button to select the desired channel. 2) To control the volume

-. To control the volume, use the volume button to adjust the volume. 3) If you just want the sound to go off

-. If you press the mute button on the remote control, no sound will be heard. Press again to make a sound. 4) If you only want audio to be available,

-. If you press the audio mode button on the remote control, only the audio will be available. Press again or switch channels to get images and audio back. 5) To view channel information

-. Press the OK button on the remote control or switch channels to view the channel information. 6) To view sponsored information

-. Press the CGNTV button on the remote control or select Sponsored Information from the menu. 7) To view the schedule,

-. Press the schedule button on the remote control or select a schedule from the menu. 7. (Menu)

. Press the menu button on the remote control to display the menu screen. The menu consists of channel menus, settings, and sponsorship. Select the Schedule tab from the menu to view the schedule for the entire channel. Press the schedule button on the remote control one more time on the screen above to see the schedule by channel. Select the Sponsorship tab from the menu to view the Sponsorship screen. 7-1. 7-2. 7-3. (Configuration Settings)

. Select the Settings tab from the menu to view the Confusion Settings screen

. Language consists of menu language and basic voice. Select the Menu tab to select the language for the menu.

. Selecting the Basic Speech tab lets you select the language for basic speech. If the content has multiple voices, play the selected voice first.

[ / Video Settings]

, . Image settings consist of video decoder, screen ratio, resolution, voice mode, and image quality. Select the Video Decoder tab to select the Video Decoder function.

. When you select the Screen Ratio tab, you can select a screen percentage.

. When you select the Resolution tab, you can select a resolution.

. If you select the Voice mode tab, you can select Voice mode.

. Select the Image Quality tab to select the image quality. If not automatic, screen loss may occur depending on network speed.

[ / STYLE]

. The style consists of channel window display time, volume window display time, volume window display time, and transparency.

. ChannelShow Window When you select the Inter-Pane tab, you can select the channel window display interval.

. When you select the Show Volumes tab, you can select Show Volumes. This screen allows you to select whether or not the volume control screen is displayed.

. When you select the Volume Window Time tab, you can select the window display time. This screen allows you to select the amount of time to display the control screen.

, OSD

. Select the Transparency tab to select the transparency of the OSD.

[ / CLOCK]

. The clock is made up of time zone, current time, and daylight saving time. The Current Time tab shows the current time.

. GMT

. Select the Time Zone tab, to select a time zone. If you select GMT manual mode in the time zone, you can set the time on the Current Time tab.

. Select the Summertime tab, to select Summertime.

LAN , WiFi

. The network consists of network selection LAN settings, WiFi settings.

. When you select the Network Selection tab, you can select a network. LAN LAN

. Selecting LAN will take you to the LAN settings screen. IP , IP

. If you select the IP setup mode, you can choose whether to receive the IP automatically or manually. IP , IP ,

, , DMS

, OK

. If you manually select the IP setup mode, the IP address, the Sevnet-mask, the gateway, and the DMS server will be enabled. The setting is set by selecting the item to be set, using the number key button on the remote control, and pressing the OK button on the remote control. WIFI , AP

.. If you select WIFI in Network Selection, you will be taken to the screen where you can select the AP.

[ / Password]

. This tab allows you to change your password AP ,

, Enter . AP . Select the AP you want to connect to, enter the password, and press Enter to try connecting. If the connection status indicates Connected, that AP connection is successful.

[ / System Information]

. Selecting the System Information tab will take you to the screen where you can view system information.

. When you select the Factory Initialization tab, factory initialization is performed and rebooted. 8. (SPECIFICATIONS)

(EXTERNAL PORT)

/ (AV OUTPUT) Phonejack Type X 1 HDMI (HDMI OUTPUT) HDMI A-Type Female X 1

(INTERNET PORT) RJ45, 10/100Mbps USB (USB PORT) USB 2.0 x 1( )

(POWER & APPEARANCE)

(ADAPTOR INPUT) AC 120 V, 50/60Hz DC 12V, 1.5A 18W 165x110x35mm 352g( ) 0 ~ 50 70%

(ADAPTOR OUTPUT)

(power consumption)

(SIZE)

(WEIGHT)

(PERMISSIBLE TEMPERATURE)

(ALLOWABLE HUMIDITY) WiFi

(SPEC) USB Module Type (802.11 b/g/n 2T2R)

(frequency of use) 2.4 ~ 2.483GHz

) . CAUTION) The service associated with human safety cannot be performed as the wireless facility may be radio-mixed. FCC Statement This equipment has been tested and found to comply with the limit for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encourage to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

- Consult the dealer or an experience radio/TV technician for help Change or modification not expressly approved by the party responsible for Compliance could void the users authority to operate the equipment This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation This device should be installed and operated with minimum 20Cm between the radiator and your body. CGNTV The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Page 1 of 1 IDENTIFICATION LABEL:

PROPOSED FCC ID LABEL The FCC ID shall be permanently affixed in the rear side of the equipment Name: Seoung-Hyun LEE Title: Deputy General Manager

Letter of Authorization

: Homecast CO., LTD.

: 14F, Doosan Bldg, 726, Eonju-ro, Gangnam-gu, Seoul, South Korea Company Address Product Name : OTT BOX Model Number : NUI-7050 FCC Identifier : 2AVNC-NUI-7050 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Seoung-Hyun LEE Title: Deputy General Manager Date: January 31, 2020 Signature of applicant

Homecast CO., LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: January 31, 2020 Subject; Request for Confidentiality FCC ID: 2AVNC-NUI-7050 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Part List Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission' s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant shot-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name: Seoung-Hyun LEE Title: Deputy General Manager