FCC ID: 2AUWDBYA1000001 Beacon40 Base

BEACON40 Solo BEACON40 Personal Smart Home Light Systems Setup Guide Lighting Your Way to a Clearer Future V2.0 TABLE OF CONTENTS Whats Included ........................................ 3 Setup .................................................................. 4 Recommended Use .............................. 6 Additional Information ........................ 7 Precautions ................................................... 7 WHATS INCLUDED BEACON40 Solo light system 1 Base lamp 1 Power cord 1 Setup guide WELCOME BEACON40 is beautifully designed to enhance cognitive function and maintain brain health. It is precisely engineered to deliver light at 40Hz, mirroring the brains healthy gamma rhythm and improving BEACON40 Personal light system mental acuity, memory and attention. BEACON40 lights complement your doctor-

prescribed protocols. Always talk to your doctor when adding any supplement to your wellness routine. This manual will guide you through proper setup and use. 1 Base lamp 1 Satellite lamp 2 Power cords 1 Setup guide 3 Setup Guide | BEACON40 SETUP 1. Remove the BEACON40 Base lamp and the power cord from the packaging. 2. Insert the silver post of the power cord into the port at the bot-

tom of the Base lamp. Connect the power cord to a wall outlet. 3. Press the power button 1 to begin use. If you have BEACON40 Personal light system continue setup:

4. BEACON40 Personal light systems also include a Satel-

lite lamp. Attach the power cord to the Satellite lamp as de-

scribed. Place the Satellite lamp in the same room within 25 feet of the Base lamp. 5. Press the power button 6 on the Satellite lamp to turn it on. 6. Press and hold the pair button 5 at the back of the Base lamp. The lights will blink. The blinking means that the lights are ready to pair. Hold the pair button for a few seconds until both lights pulse. Your lamps are now paired. 6 SATELLITE 1 BASE 4 3 2 1 4 Use the controls on the BEACON40 Base lamp to set your preferences. 1 POWER Turn your lights on and off. 2 TIMER Set your lights to turn off automatically after 1, 2 or 3 hours. 3 TONE Set your lights to: warm gold, white or cool blue. You may prefer a cooler tone during the daytime and a warmer tone in the evenings. 4 BRIGHTNESS Turn the knob to your desired luminosity. 5 PAIRING Press and hold the button to pair the Base lamp with the Satellite lamp. 5 5 Setup Guide | BEACON40BEACON40 | Setup Guide RECOMMENDED USE ADDITIONAL INFORMATION Find a comfortable setting for your lighting system. Place each light where it will be unobstructed and in the periph-

eral view of the users. We recommend placement 3 12 feet from your location. Incorporate BEACON40 into your daily habits, with routine use for one or more hours each day. BEACON40 lights are designed to fit comfortably into home and office environments. Use your lights while working, watch-

ing TV or reading. Always consult your caregiver or doctor for best benefits. For additional information, please visit GetMeBright.com or con-

tact us at: info@getmebright.com. PRECAUTIONS BEACON40 is designed for use as a complement to your doc-

tor-prescribed therapy. You should not use this product if you have a history of seizures or epilepsy, or if you have been diagnosed with photosensitive epilepsy. Consult a doctor before use if you believe you may be prone to photosensitive epileptic seizures. This product is not a medical device. HomeoLux services and products are not intended to be used as a medical device. Furthermore, the services and the products are neither regulated nor approved by the U.S. Food and Drug Ad-

ministration, and are not designed to detect or prevent causes of Alzheimers disease or any other medical condition. HomeoLux services and products are not a substitute for medical care or adult supervision. By using HomeoLux products you acknowledge, understand and agree that your use of the services and the product is entirely at your own risk. A very small percentage of people may experience a seizure when exposed to flashing lights. Even people who have no history of seizures or epilepsy may have an undiagnosed condition that can cause these photosensitive epileptic seizures. These seizures may have a variety of symptoms including lighthead-

edness, altered vision, twitching of the eyes or face, jerking or shaking of arms or legs, disorientation, confusion, or momentary loss of awareness, Seizures may also cause loss of consciousness or convulsions that can lead to injury from fall-

ing down or striking nearby objects. If you experience any of these symptoms, turn off the light immediately and consult a doctor. According to IEC62471-1:206-07 Ed. 1.0 photobiological safety of lamps and lamp systems, sources of optical radiation are classified into risk groups subject to their potential photobiological hazard. BEACON40 is GROUP1 (Low Risk). No photobiological hazard under normal behavioral limitations. HomeoLux product BEACON40 device risk group is defined in IEC 62471-1:206-

07 Ed. 1.0. Viewing the lights closer than 200mm distance should be avoided. Please fol-

low proper installation and use recommendations to avoid related risks. Multiple BEACON40 light configurations can be set up for home, office and wellness centers. To order, please visit: GetMeBright.com/shop/beacon40 6 7 Setup Guide | BEACON40BEACON40 | Setup Guide Instruction for WiFi connection of 40Hz treatment lamp Step 1 Install tuya smart APP on your phone Step 2 When opening the tuya smart APP for the first time, register and log in the account according to the APP guidance. Step 3 Power on the product and start it up. Long press the power on button and press 5S to enter the dis-

tribution network mode. At this time, the LED will display alternating flashes of warm and cold. Step 4 Step 5 Enter the homepage of the APP Home, Click

+ and select Add Device, the APP will scan the smart devices in the network to be configured.

(Reminder: WiFi connection 2.4G network during network configuration) 1.(If the device is not scanned, please click Manual Add and select Illumina-

tion and Light Source Wi-Fi to manu-

ally add the device) 1.1 According to the interface prompts, enter the password of the home wireless network, and the therapy lamp will be connected to the home wireless network Step 6 After the network is successfully configured, the treatment lamp host recovers the flashing fre-

quency of 40Hz. Step 7 Set the name and location of the lamp. After com-

pletion, the device is added successfully

(After successfully adding the device, the smart device will appear on the home page of the tuya Smart App Home.Click the device on the home page of APP, and enter the device control inter-

face to control the device.) Note:

Android 4.3 or iOS 8.0 or above, any WiFi enabled smartphone supports it. FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IC Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. GetMeBright.com | info@getmebright.com

HomeoLux LLC Federal Communications Commission Authorization and Evaluation Division Condentiality Request regarding application for certication of FCC ID: 2AUWDBYA1000001 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request condential treatment of information accompanying this application as outlined below:

Exhibit Type File Name Block Diagram Schematics Operational Description Block SCH Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustied benets to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, We are also requesting the commission to grant short-term condentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. File Name User manual Exhibit Type Manual Sincerely, Irina Tanenbaum 2021-3-9 HomeoLux LLC 152 West 57th St., 18th Floor, New York, USA 152 West 57th St, 18th Floor New York, NY 10019

(800) 444-3085 info@homeolux.com www.homeolux.com 152 West 57th St, 18th Floor New York, NY 10019

(800) 444-3085 info@homeolux.com www.homeolux.com

HomeoLux LLC Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2021-3-9 SUBJECT: FCC Application for (FCC ID: 2AUWDBYA1000001) To Whom It May Concern:

We, the undersigned, hereby authorize Sam Lv . at EMTEK (DONGGUAN) CO., LTD on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK (DONGGUAN) CO., LTD.on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Irina Tanenbaum 2021-3-9 HomeoLux LLC 152 West 57th St., 18th Floor, New York, USA 152 West 57th St, 18th Floor New York, NY 10019

(800) 444-3085 info@homeolux.com www.homeolux.com 152 West 57th St, 18th Floor New York, NY 10019

(800) 444-3085 info@homeolux.com www.homeolux.com