| submitted | available | document details (if available) | source link |
|---|---|---|---|
| July 15 2014 | October 15 2014 | Microsoft Word - T77H526.01_NGFF1216_approval sheet-20140303_for customer.doc f1321408 GPL Ghostscript 8.15 |
| various | User Manual | Users Manual | 2.77 MiB | July 15 2014 / October 15 2014 |
COMPANY CONFIDENTIAL Approval Sheet IEEE802.11 ac/n/a/b/g Bluetooth 4.0 NFC (Near Field Communication) NGFF1216-S3 Card 0.2 T77H526.01 015 TBD Project Name Approval Sheet Rev. FOXCONN Part No. Module Rev. Customer Part No. Prepared by Reviewed by Approved by Wei.Liao 1 COMPANY CONFIDENTIAL Revision History Revision Date Originator Comment 0.1 2013/11/26 Wei.Liao Initial 0.2 2014/03/03 Wei.Liao 1> Add BAW Filter design as option 2> Add RF performance specification 3> Add package type T77H526.01 is made in China, Manufactured by HongFuJin Precision Industry Co., LTD Manufacture Site: ShenZhen, Chongqing, Nanning http://www.foxconn.com 2 COMPANY CONFIDENTIAL Content REVISION HISTORY .......................................................................................................................................................2 1. INTRODUCTION ..........................................................................................................................................................4 2. MODULE HARDWARE OVERVIEW.........................................................................................................................5 3. ELECTRICAL CHARACTERISTICS .........................................................................................................................6 4. MECHANICAL DRAWING ..........................................................................................................................................9 5. WLAN RF SPECIFICATION .....................................................................................................................................11 6. REFERENCE PERIPHERAL CIRCUIT..................................................................................................................23 7. SOFTWARE REQUIREMENT..................................................................................................................................26 8. PACKING SPECIFICATION .....................................................................................................................................27 9. ENVIRONMENTAL REQUIREMENTS ...................................................................................................................28 10. SOLDERING AND REFLOW CONDITION..........................................................................................................29 3 COMPANY CONFIDENTIAL 1. Introduction The T77H526.01 NGFF1216-S3 Card is based on Marvell 88W8897-B0-CBK2-T solution with WLAN/Bluetooth/NFC functions and provides DSSS and OFDM baseband modulation, MAC, CPU, OTP (one time programmable) memory, host interfaces, power management unit (PMU) and direct conversion WLAN RF radio. 1.1 Scope IEEE 802.11 Standards
802.11 data rates of 1 and 2 Mbps
802.11b data rates of 5.5 and 11 Mbps
802.11a/g data rates of 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11n HT20 with 800ns GI data rates of 6.5, 13, 19.5, 26, 39, 52, 58.5 and 65Mbps
802.11n HT20 with 400ns GI data rates of 7.2,14.4, 21.7, 28.9, 43.3, 57.8, 65 and 72.2Mbps
802.11n HT40 with 800ns GI data rates of 13.5, 27, 40.5, 54, 81, 108, 121.5 and 135Mbps
802.11n HT40 with 400ns GI data rates of 15, 30, 45, 60, 90, 120, 135 and 150Mbps
802.11ac VHT80 with 800ns GI data rates of 29.3, 58.5, 87.8, 117, 175.5, 234, 263.3, 292.5, 351 and 390Mbps
802.11ac VHT80 with 400ns GI data rates of 32.5, 65, 97.5, 130, 195, 260, 292.5, 325, 390 and 433.3Mbps
802.11n up to 144.4Mbps (20 MHz), 300Mbps (40 MHz) for 2X2 MIMO.
802.11ac up to 173.3Mbps (20 MHz), 400Mbps (40 MHz), 866.7Mbps (80 MHz) for 2X2 MIMO. Bluetooth
Bluetooth 4.0 + HS
Bluetooth Class 2
Bluetooth Class 1
Baseband and radio BDR and EDR packet types1 Mbps (GFSK), 2 Mbps ( /4-
DQPSK), and 3 Mbps (8DPSK)
Supports Low Energy (LE) NFC (Near field communication)
Full protocol support ISO 14443A/B, ISO 18092, ISO 15693,NFCIP-1, NFC Forum, EMV contactless targets with data rates up to 848Kbps.
Support Reader/Writer, Card Emulation, and Peer-to-Peer (P2P) modes. 4 COMPANY CONFIDENTIAL 2. Module Hardware Overview Block Diagram IEEE802.11a/b/g/n /ac (2X2 MIMO) + BT4.0 + NFC Module. Features
2.4GHz + 5GHz bands RF interface.
Host interface for WLAN, Bluetooth and NFC Configure from platform.
PCIE M.2 Type 1216-S3 card with 76 pins Soldered down solution Module.
+3.3V +/- 5% supply power from host platform for VBAT.
+1.8V +/- 5% supply power from host platform for digital IO SDIO.
Two RF micro-coaxial connectors (2.0mmx2.0mm), One for Wi-Fi1 antenna port, Another antenna port shared by Wi-Fi2 and BT
Uses MRVL 88W8897 integrated OTP memory instead of external EEPROM.
Use LGA PAD connects for NFC external antenna.
Provide coexistence interface for connecting to an external LTE (Long Term Evolution) device.
RoHS and Green Compliant. 5 COMPANY CONFIDENTIAL 3. Electrical Characteristics 3.1 DC Characteristics (recommended operating rating) Parameter Minimum Typical Maximum Units
+3.3V (Analog power supply)
+3.3V_USB (USB power supply)
+VIO (Digital I/O power supply) VIO_SD (Digital I/O SDIO power supply) Storage Temperature Storage Humidity Operation Temperature HBM MM ESD Level 2.97 2.97 2.97 1.62 1.62
-30 0 0
-
-
3.3 3.3 3.3 1.8 1.8
~
~
~
1.0K 200 3.63 3.63 3.63 1.98 1.98
+85 90 60
-
-
V V V V V
%
V V 3.3 Host interface Configure table Configuration CONFIG_HOST [3:0] = b1111 CONFIG_HOST [3:0] = b1110 CONFIG_HOST [3:0] = b1101 CONFIG_HOST [3:0] = b0111 CONFIG_HOST [3:0] = b0110 CONFIG_HOST [3:0] = b0010 WLAN PCIE PCIE SDIO SDIO USB USB BT / NFC BTAMPS UART USB UART SDIO USB UART N/A USB SDIO SDIO USB USB PCI Express Base Specification, Revision 3.0 PCIe Interface The 88W8897 PCI Express Interface Unit (PCIe) functions as a PCI Express endpoint device that conforms to the following standards:
Express Card Standard, Revision 1.1 Latency Tolerance Reporting (LTR) Capability PCI Express Bus Power Management Interface Specification, Revision 1.2 PCI Express Mini Card Electromechanical Specification, Revision 1.2 PCI Express Card Electromechanical Specification, Revision 1.1 L1 Substates ECR Capability 6 COMPANY CONFIDENTIAL USB 2.0 Device Interface The USB device interface is compliant with the Universal Serial Bus Specification, Revision 2.0, April 27, 2000. A USB host uses the USB cable bus and the USB 2.0 device Interface to communicate with the chip. The main features of the USB device interface include:
High/full speed operation (480/12 Mbps)
Suspend/host resume/device resume (remote wake-up)
Built-in DMA engine that reduces interrupt loads on the embedded processor and reduces the system bus bandwidth requirement for serving the USB device operation
Supports Link Power Management (LPM), corresponding host resume or device resume
(remote wakeup) to exit from L1 sleep state The USB 2.0 device interface is designed with 3.3V signal level pads. SDIO Device Interface The 88W8897 supports a SDIO device interface that conforms to the industry standard SDIO full-speed card specification and allows a host controller using the SDIO bus protocol to access the wireless SoC device. The SDIO device interface main features include:
Supports SDIO 3.0 standard
On chip memory used for CIS
Supports SPI, 1-bit SDIO, and 4-bit SDIO transfer modes at the full clock range of 0 to 208MHz
Special interrupt register for information exchange
Allows card to interrupt host High-Speed UART Interface The 88W8897 supports a high-speed Universal asynchronous receiver/transmitter interface, compliant to the industry standard 16650 specification. The UART interface features include:
7 COMPANY CONFIDENTIAL Interrupt triggers for low power, high throughput operation
FIFO mode permanently selected for transmit and receive operations
2 pins for transmit and receive operations
2 flow control pins
3.4 Power up sequence The following requirements must be met for correct power up:
Ramp-up time of +3.3V should be < 5ms.
PDn is tied to +3.3V directly.
External +3.3V/+VIO/+3.3V_USB from host
VIO_SD is provided by host if SDIO interface is used.
GPIO_3 need tied to +VIO by host if SDIO interface is used. 8 COMPANY CONFIDENTIAL 4. Mechanical Drawing 4.1 Module dimension 4.2 Antenna of Connector location 9 4.3 Card Pin-mapping COMPANY CONFIDENTIAL 10 COMPANY CONFIDENTIAL 5. WLAN RF Specification This specification is based on additional references listed below for each RF chain.
IEEE802.11b IEEE Std. 802.11ac IEEE Std. 802.11a IEEE Std. 802.11b IEEE Std. 802.11g IEEE Std. 802.11n Items Min. Typ Contents IEEE802.11b DBPSK/DQPSK/CCK CH1 to CH13, CH14 1, 2, 5.5, 11Mbps
+14.5
+14.5
+14.5
+14.5
+16
+16
+16
+16
-
-
-
-
-
-
-25 Min.
-
-
-
-
-10
-
-
-27
-27
-27
-27
-
Typ
-95
-94
-91
-88
-
Max.
+17.5
+17.5
+17.5
+17.5
-30
-50
-9.10
-9.10
-9.10
-9.10
+25 Max.
-76
-76
-76
-76
-
Unit dBm dBm dBm dBm dBr dBr dB dB dB dB ppm Unit dBm dBm dBm dBm dBm Standard Modulation Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) 1Mbps 2) 2Mbps 3) 5.5Mbps 4) 11Mbps 2. Spectrum Mask 1) fc +/-11MHz to +/-22MHz 2) fc > +/-22MHz 3. Modulation Accuracy (EVM) 1) 1Mbps 2) 2Mbps 3) 5.5Mbps 4) 11Mbps 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 8%) 1) 1Mbps (FER 2) 2Mbps (FER 3) 5.5Mbps (FER 4) 11Mbps (FER 8%) 8%) 8%) 8%) 6. Maximum Input Level (FER 11 COMPANY CONFIDENTIAL Contents IEEE802.11g OFDM CH1 to CH13 6, 9, 12, 18, 24, 36, 48, 54Mbps Min. 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5
-
-
-
-
-
-
-
-
-
-
-
-25 Min.
-20 Typ. 15 15 15 15 15 15 15 15
-
-
-
-32
-32
-32
-32
-32
-32
-32
-32
-
Typ.
-89
-88
-87
-86
-82
-80
-75
-74
-
Max. 16.5 16.5 16.5 16.5 16.5 16.5 16.5 16.5
-20
-28
-40
-5
-8
-10
-13
-16
-19
-22
-25
+25 Max.
-82
-81
-79
-77
-74
-70
-66
-65
-
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm IEEE802.11g Items Standard Modulation Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 2. Spectrum Mask 1) fc +/- 11MHz 2) fc +/- 20MHz 3) fc > +/-30MHz 3. Modulation Accuracy (EVM) 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) 6Mbps (PER <10%) 2) 9Mbps (PER < 10%) 3) 12Mbps (PER < 10%) 4) 18Mbps (PER < 10%) 5) 24Mbps (PER < 10%) 6) 36Mbps (PER < 10%) 7) 48Mbps (PER < 10%) 8) 54Mbps (PER < 10%) 6. Maximum Input Level (PER < 10%) 12 COMPANY CONFIDENTIAL Contents IEEE802.11n HT20 OFDM CH1 to CH13 MCS0~7 Typ. Max. 14 14 14 14 14 14 14 14
-
-
-
-32
-32
-32
-32
-32
-32
-32
-32
-
Typ.
-89
-87
-85
-80
-78
-75
-72
-71
-
15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5
-20
-28
-45
-5
-10
-13
-16
-19
-22
-25
-27
+25 Max.
-82
-79
-77
-74
-70
-66
-65
-64
-
Min. 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5
-
-
-
-
-
-
-
-
-
-
-
-25 Min.
-
-
-
-
-
-
-
-
-20 Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm IEEE802.11n HT20-2.4G Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 2. Spectrum Mask 1) fc +/- 11MHz 2) fc +/- 20MHz 3) fc > +/-30MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) 13 IEEE802.11n HT40-2.4G Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 2. Spectrum Mask 1) fc +/- 21MHz 2) fc +/- 40MHz 3) fc > +/-60MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) COMPANY CONFIDENTIAL Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm Contents IEEE802.11n HT40 OFDM CH3~CH9 MCS0~MCS7 Min. Typ. Max. 13 13 13 13 13 13 13 13
-
-
-
-30
-30
-30
-30
-30
-30
-30
-30
-
Typ.
-86
-84
-81
-18
-75
-72
-70
-69
-
14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5
-20
-28
-45
-5
-10
-13
-16
-19
-22
-25
-27
+25 Max.
-79
-76
-74
-71
-67
-63
-62
-61
-
11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5
-
-
-
-
-
-
-
-
-
-
-
-25 Min.
-
-
-
-
-
-
-
-20 14 COMPANY CONFIDENTIAL Contents IEEE802.11a OFDM CH36~CH48, CH52~CH64, CH100~CH165 6, 9, 12, 18, 24, 36, 48, 54Mbps Min. 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5
-
-
-
-
-
-
-
-
-
-
-
-20 Min.
-
-
-
-
-
-
-
-
-30 Typ. 15 15 15 15 15 15 15 15
-
-
-
-24
-25
-25
-25
-25
-25
-27
-30
-
Typ.
-87
-86
-84
-82
-79
-74
-72
-71
-
Max. 16.5 16.5 16.5 16.5 16.5 16.5 16.5 16.5
-20
-28
-40
-5
-8
-10
-13
-16
-19
-22
-25
+20 Max.
-82
-81
-79
-77
-74
-70
-66
-65
-
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm IEEE802.11a Items Standard Modulation Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 2. Spectrum Mask 1) fc +/- 11MHz 2) fc +/- 20MHz 3) fc > +/-30MHz 3. Modulation Accuracy (EVM) 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) 6Mbps (PER <10%) 2) 9Mbps (PER < 10%) 3) 12Mbps (PER < 10%) 4) 18Mbps (PER < 10%) 5) 24Mbps (PER < 10%) 6) 36Mbps (PER < 10%) 7) 48Mbps (PER < 10%) 8) 54Mbps (PER < 10%) 6. Maximum Input Level (PER < 10%) 15 IEEE802.11n HT20-5G Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 3. Spectrum Mask 1) fc +/- 11MHz 2) fc +/- 20MHz 3) fc > +/-30MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) COMPANY CONFIDENTIAL Contents IEEE802.11n HT20 OFDM CH36~CH48, CH52~CH64, CH100~CH165 Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm Min. Typ. Max. MCS0~7 14 14 14 14 14 14 14 14
-
-
-
-30
-30
-30
-30
-30
-30
-30
-30
-
Typ.
-86
-84
-81
-78
-74
-70
-69
-68
-
15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5
-20
-28
-40
-5
-10
-13
-16
-19
-22
-25
-27
+20 Max.
-82
-79
-77
-74
-70
-66
-65
-64
-
12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5
-
-
-
-
-
-
-
-
-
-
-
-20 Min.
-
-
-
-
-
-
-
-
-30 16 IEEE802.11n HT40-5G Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 2. Spectrum Mask 1) +/- 21MHz 2) +/- 40MHz 3) > +/-60MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) COMPANY CONFIDENTIAL Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm Contents IEEE802.11n HT40 OFDM CH38~CH62, CH102~CH159 MCS0~MCS7 Min. Typ. Max. 13 13 13 13 13 13 13 13
-
-
-
-30
-30
-30
-30
-30
-30
-30
-30
-
Typ.
-84
-81
-79
-76
-72
-67
-66
-65
-
14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5
-20
-28
-40
-5
-10
-13
-16
-19
-22
-25
-27
+20 Max.
-79
-76
-74
-71
-67
-63
-62
-61
-
11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5
-
-
-
-
-
-
-
-
-
-
-
-20 Min.
-
-
-
-
-
-
-
-
-30 17 IEEE802.11ac VHT20 Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 2. Spectrum Mask 1) fc +/-11MHz 2) fc +/-20MHz 3) fc > +/-30MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 9) MCS8 (PER < 10%) 6. Maximum Input Level (PER < 10%) COMPANY CONFIDENTIAL Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm Contents IEEE802.11ac VHT20 OFDM CH36~CH48, CH52~CH64, CH100~CH165 Min. Typ. Max. MCS0~MCS8 8 8 8 8 8 8 8 8 8
-
-
-
-33
-33
-33
-33
-33
-33
-33
-33
-33
-
Typ.
-89
-85
-83
-80
-75
-72
-71
-70
-66
-
9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5
-20
-28
-40
-5
-10
-13
-16
-19
-22
-25
-27
-30
+20 Max.
-82
-79
-77
-74
-70
-66
-65
-64
-59
-
6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5
-
-
-
-
-
-
-
-
-
-
-
-
-20 Min.
-
-
-
-
-
-
-
-
-
-30 18 IEEE802.11ac VHT40 Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 10) MCS9 2. Spectrum Mask 1) fc +/-21MHz 2) fc +/-40MHz 3) fc > +/-60MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 10) MCS9 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 9) MCS8 (PER < 10%) 10) MCS9 (PER < 10%) 6. Maximum Input Level (PER < 10%) COMPANY CONFIDENTIAL Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm Contents IEEE802.11ac VHT40 OFDM CH38~CH62, CH102~CH159 MCS0~MCS9 Min. Typ. Max. 8 8 8 8 8 8 8 8 8 8
-30
-37
-50
-33
-33
-33
-33
-33
-33
-33
-33
-33
-33
-
Typ.
-86
-83
-81
-77
-73
-70
-69
-66
-64
-62
-
9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5
-20
-28
-40
-5
-10
-13
-16
-19
-22
-25
-27
-30
-32
+20 Max.
-79
-76
-74
-71
-67
-63
-62
-61
-56
-54
-
6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5
-
-
-
-
-
-
-
-
-
-
-
-
-
-20 Min.
-
-
-
-
-
-
-
-
-
-
-30 19 IEEE802.11ac VHT80 Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 10) MCS9 2. Spectrum Mask 1) +/-41MHz 2) +/-80MHz 3) +/-120MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 10) MCS9 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 9) MCS8 (PER < 10%) 10) MCS9 (PER < 10%) 6. Maximum Input Level (PER < 10%) COMPANY CONFIDENTIAL Contents IEEE802.11ac VHT80 OFDM CH42,CH58,CH106,CH122,CH138,CH155 Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm Min. Typ. Max. MCS0~MCS9 8 8 8 8 8 8 8 8 8 8
-25
-33
-45
-33
-33
-33
-33
-33
-33
-33
-33
-33
-33
-
Typ.
-82
-79
-77
-74
-70
-66
-65
-64
-59
-57
-
9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5
-20
-28
-40
-5
-10
-13
-16
-19
-22
-25
-27
-30
-32
+20 Max.
-76
-73
-71
-68
-64
-60
-59
-58
-53
-51
-
6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5
-
-
-
-
-
-
-
-
-
-
-
-
-
-20 Min.
-
-
-
-
-
-
-
-
-
-
-30 20 Bluetooth 4.0 Items Standard Modulation COMPANY CONFIDENTIAL Contents Bluetooth 4.0 Basic rate (BR), Enhanced data rate (EDR). Bluetooth low energy (BLE). 1Mbps(GFSK), Channel Channel spacing Duplex transmission TX Characteristics - BR 1. Power Levels 1Mbps (GFSK) 2. Frequency Tolerance Initial center frequency 3. Carrier Frequency Drift Maximum drift rate within 50us DH1 (Maximum length 1-slot packet) DH3 (Maximum length 3-slot packet) DH5 (Maximum length 5-slot packet) 4. Modulation Characteristic (Frequency deviations) f1avg f2max f2avg/
f1avg/ Ratio
/4-DQPSK
/4-DQPSK) TX Characteristics - EDR 1. Power Levels 2Mbps(
3Mbps(8-DPSK) 2.Carrier Frequency Stability and Modulation Accuracy 2Mbps:
Packet Initial Frequency Error: i Block Frequency Error: 0 Total Frequency Error: i + 0 RMS DEVM Peak DEVM 99% DEVM (% Symbols <=0.3) 3Mbps: 8-DPSK Initial Frequency Error: i Frequency Error: 0 Block Frequency Error: i + 0 RMS DEVM Peak DEVM 99% DEVM (% Symbols <=0.13) 3. Differential Phase Encoding 2Mbps(
3Mbps(8-DPSK) TX Characteristics - BLE 1. Power Levels 1Mbps(GFSK) 2. Modulation Characteristic (Frequency deviations)
/4-DQPSK) f1avg f2max f2avg/f1avg Ratio 3. Carrier frequency offset and drift fn fTX, n = 0, 1, 2, 3...k
|f0 fn|, n = 2, 3, 4...k 2Mbps(
/4-DQPSK), 3Mbps(8-DPSK) 2.402GHz ~ 2.480GHz (CH0~CH78) 1 MHz for BR,EDR, 2MHz for LE Time-Division Duplex (TDD) scheme Unit Max. Typ. Min. 5
-75
-20
-25
-40
-40 140 115 0.80 Min. 5 5
-75
-10
-75
-
-
99%
-75
-10
-75
-
-
99%
99%
99%
Min.
-2 225 185 0.8
-150
-
7 3.2
-4.5
-3 0 0 164 140 0.89 Typ. 7 7 1.1 2.9 4 0.05 0.15 100%
1.4 2.8 4.2 0.05 1.15 100%
100%
100%
Typ. 0 253 227 0.92 2.57 1.41 21 9 75 20 25 40 40 175
-
-
Max. 9 9 75 10 75 0.2 0.35
-
75 10 75 0.13 0.25
-
-
-
Max.
+2 275
-
-
+150 50 dBm kHz kHz/50us kHz kHz kHz kHz kHz Unit dBm dBm kHz kHz kHz kHz kHz kHz Unit dBm kHz kHz kHz kHz
|f1 f0|
|fn fn-5|, n = 6, 7, 8...k COMPANY CONFIDENTIAL
-
-
0.98 0.49 20 20 kHz kHz Min. Typ. Max. Unit
-
-
-
-
-20
-20
-20
-20
-88
-88
-84
-80
-
-
-
-
-70
-70
-70
-70
-
-
-
-
dBm dBm dBm dBm dBm dBm dBm dBm RX Characteristics 1. Minimum Input Level Sensitivity GFSK (1Mbps) (BER 0.1%)
/4 DQPSK (2Mbps) (BER 0.1%) 0.1%) 8DPSK (3Mbps) (BER GFSK (1Mbps) BLE (BER< 30.8%) 2. Maximum Input Level GFSK (1Mbps) (BER 0.1%)
/4 DQPSK (2Mbps) (BER 0.1%) 8DPSK (3Mbps) (BER GFSK (1Mbps) BLE (BER< 30.8%) 0.1%) 22 COMPANY CONFIDENTIAL 6. Schematics design 23 COMPANY CONFIDENTIAL 24 COMPANY CONFIDENTIAL 25 COMPANY CONFIDENTIAL 7. Software Requirement Marvell is the owner for driver and Firmware release. 26 COMPANY CONFIDENTIAL 8. Packing Specification 27 COMPANY CONFIDENTIAL 9. Environmental Requirements 1> Operating Temperature Conditions The product shall be capable of continuous reliable operation when operating in ambient temperature of 0C to 60C. 2> Non-Operating Temperature Conditions Neither subassemblies shall be damaged nor shall the operational performance be degraded when restored to the operating temperature when exposed to storage temperature in the range of -20C to +85C. 3> Operating Humidity Conditions The product shall be capable of continuous reliable operation when subjected to relative humidity in the range of 0% and 90% non-condensing. 4> Non-Operating Humidity conditions The product shall not be damaged nor shall the performance be degraded after exposure to relative humidity. 5> Terminals The product is mounted with motherboard through Land Grid Array. In order to prevent poor soldering, Please do not touch LGA portion by hand. 6> Falling It will cause damage on the mounted components when the product is falling or receiving drop shock. It may cause the product mal-function. 28 COMPANY CONFIDENTIAL 10. Soldering and reflow condition Reflow soldering shall be done according to the below temperature profile. 29 COMPANY CONFIDENTIAL 10 Package information TBD 39 Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes:
(Pour utilisation de dispositif module) 1) L'antenne doit tre installe de telle sorte qu'une distance de 20 cm est respecte entre l'antenne et les utilisateurs, et 2) Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformit supplmentaires requis pour ce module install. IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE:
Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains IC: 2878D-T77H506. Plaque signaltique du produit final Ce module metteur est autoris uniquement pour une utilisation dans un dispositif o l'antenne peut tre installe de telle sorte qu'une distance de 20cm peut tre maintenue entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante: "Contient des IC: 2878D-T77H506". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this 39 manual. Manuel d'information l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires requises et avertissements comme indiqu dans ce manuel. Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and
(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.
(iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:
Le guide dutilisation des dispositifs pour rseaux locaux doit inclure des instructions prcises sur les restrictions susmentionnes, notamment :
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
(ii) le gain maximal dantenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 MHz doit se conformer la limite de p.i.r.e.;
(iii) le gain maximal dantenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer la limite de p.i.r.e. spcifie pour lexploitation point point et non point point, selon le cas.
(iv) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. DETACHABLE ANTENNA USAGE This device has been designed to operate with an antenna having a maximum gain of [-0.6]
dB. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter (IC: 2878D-T77H506 / Model: T77H506) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Ce dispositif a t conu pour fonctionner avec une antenne ayant un gain maximal de dB
[-0.6]. Une antenne gain plus lev est strictement interdite par les rglements d'Industrie Canada. L'impdance d'antenne requise est de 50 ohms. 40 Conformment la rglementation d'Industrie Canada, le prsent metteur radio peutfonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pourl'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que lapuissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. Le prsent metteur radio (IC: 2878D-T77H506 / Modle: T77H506) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. For Taiwan:
5.25-5.35 1. 2. XXXyyyLPDzzzz-x 41
This product uses the FCC Data API but is not endorsed or certified by the FCC