all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
User Manual | Users Manual | 2.77 MiB | July 15 2014 / October 15 2014 | |||
1 2 3 |
|
Internal Photos | Internal Photos | 314.72 KiB | July 15 2014 / October 15 2014 | |||
1 2 3 |
|
External Photos | External Photos | 561.44 KiB | July 15 2014 / October 15 2014 | |||
1 2 3 |
|
Label and Location | ID Label/Location Info | 36.73 KiB | July 15 2014 | |||
1 2 3 |
|
Attestation (Channel and Mode Declaration) | Attestation Statements | 22.10 KiB | July 15 2014 | |||
1 2 3 |
|
Attestation (DFS Client Declaration) | Attestation Statements | 71.51 KiB | July 15 2014 | |||
1 2 3 | Block Diagram | Block Diagram | July 15 2014 | confidential | ||||
1 2 3 |
|
Confidentiality Request (Shortterm) | Cover Letter(s) | 18.59 KiB | July 15 2014 | |||
1 2 3 |
|
Confidentiality Request | Cover Letter(s) | 17.84 KiB | July 15 2014 | |||
1 2 3 |
|
Cover Letter (Agent Authorization) | Cover Letter(s) | 30.13 KiB | July 15 2014 | |||
1 2 3 |
|
Cover Letter (Modular Approval) | Cover Letter(s) | 18.21 KiB | July 15 2014 | |||
1 2 3 | Operational Description (Software) | Operational Description | July 15 2014 | confidential | ||||
1 2 3 | Operational Description | Operational Description | July 15 2014 | confidential | ||||
1 2 3 |
|
RF Exposure Info (MPE) | RF Exposure Info | 393.44 KiB | July 15 2014 | |||
1 2 3 | Schematics | Schematics | July 15 2014 | confidential | ||||
1 2 3 |
|
Test Report (DFS) | Test Report | 906.90 KiB | July 15 2014 | |||
1 2 3 |
|
Test Report (DSS) | Test Report | 1.50 MiB | July 15 2014 | |||
1 2 3 |
|
Test Report (DTS) | Test Report | 1.72 MiB | July 15 2014 | |||
1 2 3 |
|
Test Report (NII) | Test Report | 1.12 MiB | July 15 2014 | |||
1 2 3 |
|
Test Setup Photos (DFS) | Test Setup Photos | 96.19 KiB | July 15 2014 / October 15 2014 | |||
1 2 3 |
|
Test Setup Photos | Test Setup Photos | 542.26 KiB | July 15 2014 / October 15 2014 |
1 2 3 | User Manual | Users Manual | 2.77 MiB | July 15 2014 / October 15 2014 |
COMPANY CONFIDENTIAL Approval Sheet IEEE802.11 ac/n/a/b/g Bluetooth 4.0 NFC (Near Field Communication) NGFF1216-S3 Card 0.2 T77H526.01 015 TBD Project Name Approval Sheet Rev. FOXCONN Part No. Module Rev. Customer Part No. Prepared by Reviewed by Approved by Wei.Liao 1 COMPANY CONFIDENTIAL Revision History Revision Date Originator Comment 0.1 2013/11/26 Wei.Liao Initial 0.2 2014/03/03 Wei.Liao 1> Add BAW Filter design as option 2> Add RF performance specification 3> Add package type T77H526.01 is made in China, Manufactured by HongFuJin Precision Industry Co., LTD Manufacture Site: ShenZhen, Chongqing, Nanning http://www.foxconn.com 2 COMPANY CONFIDENTIAL Content REVISION HISTORY .......................................................................................................................................................2 1. INTRODUCTION ..........................................................................................................................................................4 2. MODULE HARDWARE OVERVIEW.........................................................................................................................5 3. ELECTRICAL CHARACTERISTICS .........................................................................................................................6 4. MECHANICAL DRAWING ..........................................................................................................................................9 5. WLAN RF SPECIFICATION .....................................................................................................................................11 6. REFERENCE PERIPHERAL CIRCUIT..................................................................................................................23 7. SOFTWARE REQUIREMENT..................................................................................................................................26 8. PACKING SPECIFICATION .....................................................................................................................................27 9. ENVIRONMENTAL REQUIREMENTS ...................................................................................................................28 10. SOLDERING AND REFLOW CONDITION..........................................................................................................29 3 COMPANY CONFIDENTIAL 1. Introduction The T77H526.01 NGFF1216-S3 Card is based on Marvell 88W8897-B0-CBK2-T solution with WLAN/Bluetooth/NFC functions and provides DSSS and OFDM baseband modulation, MAC, CPU, OTP (one time programmable) memory, host interfaces, power management unit (PMU) and direct conversion WLAN RF radio. 1.1 Scope IEEE 802.11 Standards
802.11 data rates of 1 and 2 Mbps
802.11b data rates of 5.5 and 11 Mbps
802.11a/g data rates of 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11n HT20 with 800ns GI data rates of 6.5, 13, 19.5, 26, 39, 52, 58.5 and 65Mbps
802.11n HT20 with 400ns GI data rates of 7.2,14.4, 21.7, 28.9, 43.3, 57.8, 65 and 72.2Mbps
802.11n HT40 with 800ns GI data rates of 13.5, 27, 40.5, 54, 81, 108, 121.5 and 135Mbps
802.11n HT40 with 400ns GI data rates of 15, 30, 45, 60, 90, 120, 135 and 150Mbps
802.11ac VHT80 with 800ns GI data rates of 29.3, 58.5, 87.8, 117, 175.5, 234, 263.3, 292.5, 351 and 390Mbps
802.11ac VHT80 with 400ns GI data rates of 32.5, 65, 97.5, 130, 195, 260, 292.5, 325, 390 and 433.3Mbps
802.11n up to 144.4Mbps (20 MHz), 300Mbps (40 MHz) for 2X2 MIMO.
802.11ac up to 173.3Mbps (20 MHz), 400Mbps (40 MHz), 866.7Mbps (80 MHz) for 2X2 MIMO. Bluetooth
Bluetooth 4.0 + HS
Bluetooth Class 2
Bluetooth Class 1
Baseband and radio BDR and EDR packet types1 Mbps (GFSK), 2 Mbps ( /4-
DQPSK), and 3 Mbps (8DPSK)
Supports Low Energy (LE) NFC (Near field communication)
Full protocol support ISO 14443A/B, ISO 18092, ISO 15693,NFCIP-1, NFC Forum, EMV contactless targets with data rates up to 848Kbps.
Support Reader/Writer, Card Emulation, and Peer-to-Peer (P2P) modes. 4 COMPANY CONFIDENTIAL 2. Module Hardware Overview Block Diagram IEEE802.11a/b/g/n /ac (2X2 MIMO) + BT4.0 + NFC Module. Features
2.4GHz + 5GHz bands RF interface.
Host interface for WLAN, Bluetooth and NFC Configure from platform.
PCIE M.2 Type 1216-S3 card with 76 pins Soldered down solution Module.
+3.3V +/- 5% supply power from host platform for VBAT.
+1.8V +/- 5% supply power from host platform for digital IO SDIO.
Two RF micro-coaxial connectors (2.0mmx2.0mm), One for Wi-Fi1 antenna port, Another antenna port shared by Wi-Fi2 and BT
Uses MRVL 88W8897 integrated OTP memory instead of external EEPROM.
Use LGA PAD connects for NFC external antenna.
Provide coexistence interface for connecting to an external LTE (Long Term Evolution) device.
RoHS and Green Compliant. 5 COMPANY CONFIDENTIAL 3. Electrical Characteristics 3.1 DC Characteristics (recommended operating rating) Parameter Minimum Typical Maximum Units
+3.3V (Analog power supply)
+3.3V_USB (USB power supply)
+VIO (Digital I/O power supply) VIO_SD (Digital I/O SDIO power supply) Storage Temperature Storage Humidity Operation Temperature HBM MM ESD Level 2.97 2.97 2.97 1.62 1.62
-30 0 0
-
-
3.3 3.3 3.3 1.8 1.8
~
~
~
1.0K 200 3.63 3.63 3.63 1.98 1.98
+85 90 60
-
-
V V V V V
%
V V 3.3 Host interface Configure table Configuration CONFIG_HOST [3:0] = b1111 CONFIG_HOST [3:0] = b1110 CONFIG_HOST [3:0] = b1101 CONFIG_HOST [3:0] = b0111 CONFIG_HOST [3:0] = b0110 CONFIG_HOST [3:0] = b0010 WLAN PCIE PCIE SDIO SDIO USB USB BT / NFC BTAMPS UART USB UART SDIO USB UART N/A USB SDIO SDIO USB USB PCI Express Base Specification, Revision 3.0 PCIe Interface The 88W8897 PCI Express Interface Unit (PCIe) functions as a PCI Express endpoint device that conforms to the following standards:
Express Card Standard, Revision 1.1 Latency Tolerance Reporting (LTR) Capability PCI Express Bus Power Management Interface Specification, Revision 1.2 PCI Express Mini Card Electromechanical Specification, Revision 1.2 PCI Express Card Electromechanical Specification, Revision 1.1 L1 Substates ECR Capability 6 COMPANY CONFIDENTIAL USB 2.0 Device Interface The USB device interface is compliant with the Universal Serial Bus Specification, Revision 2.0, April 27, 2000. A USB host uses the USB cable bus and the USB 2.0 device Interface to communicate with the chip. The main features of the USB device interface include:
High/full speed operation (480/12 Mbps)
Suspend/host resume/device resume (remote wake-up)
Built-in DMA engine that reduces interrupt loads on the embedded processor and reduces the system bus bandwidth requirement for serving the USB device operation
Supports Link Power Management (LPM), corresponding host resume or device resume
(remote wakeup) to exit from L1 sleep state The USB 2.0 device interface is designed with 3.3V signal level pads. SDIO Device Interface The 88W8897 supports a SDIO device interface that conforms to the industry standard SDIO full-speed card specification and allows a host controller using the SDIO bus protocol to access the wireless SoC device. The SDIO device interface main features include:
Supports SDIO 3.0 standard
On chip memory used for CIS
Supports SPI, 1-bit SDIO, and 4-bit SDIO transfer modes at the full clock range of 0 to 208MHz
Special interrupt register for information exchange
Allows card to interrupt host High-Speed UART Interface The 88W8897 supports a high-speed Universal asynchronous receiver/transmitter interface, compliant to the industry standard 16650 specification. The UART interface features include:
7 COMPANY CONFIDENTIAL Interrupt triggers for low power, high throughput operation
FIFO mode permanently selected for transmit and receive operations
2 pins for transmit and receive operations
2 flow control pins
3.4 Power up sequence The following requirements must be met for correct power up:
Ramp-up time of +3.3V should be < 5ms.
PDn is tied to +3.3V directly.
External +3.3V/+VIO/+3.3V_USB from host
VIO_SD is provided by host if SDIO interface is used.
GPIO_3 need tied to +VIO by host if SDIO interface is used. 8 COMPANY CONFIDENTIAL 4. Mechanical Drawing 4.1 Module dimension 4.2 Antenna of Connector location 9 4.3 Card Pin-mapping COMPANY CONFIDENTIAL 10 COMPANY CONFIDENTIAL 5. WLAN RF Specification This specification is based on additional references listed below for each RF chain.
IEEE802.11b IEEE Std. 802.11ac IEEE Std. 802.11a IEEE Std. 802.11b IEEE Std. 802.11g IEEE Std. 802.11n Items Min. Typ Contents IEEE802.11b DBPSK/DQPSK/CCK CH1 to CH13, CH14 1, 2, 5.5, 11Mbps
+14.5
+14.5
+14.5
+14.5
+16
+16
+16
+16
-
-
-
-
-
-
-25 Min.
-
-
-
-
-10
-
-
-27
-27
-27
-27
-
Typ
-95
-94
-91
-88
-
Max.
+17.5
+17.5
+17.5
+17.5
-30
-50
-9.10
-9.10
-9.10
-9.10
+25 Max.
-76
-76
-76
-76
-
Unit dBm dBm dBm dBm dBr dBr dB dB dB dB ppm Unit dBm dBm dBm dBm dBm Standard Modulation Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) 1Mbps 2) 2Mbps 3) 5.5Mbps 4) 11Mbps 2. Spectrum Mask 1) fc +/-11MHz to +/-22MHz 2) fc > +/-22MHz 3. Modulation Accuracy (EVM) 1) 1Mbps 2) 2Mbps 3) 5.5Mbps 4) 11Mbps 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 8%) 1) 1Mbps (FER 2) 2Mbps (FER 3) 5.5Mbps (FER 4) 11Mbps (FER 8%) 8%) 8%) 8%) 6. Maximum Input Level (FER 11 COMPANY CONFIDENTIAL Contents IEEE802.11g OFDM CH1 to CH13 6, 9, 12, 18, 24, 36, 48, 54Mbps Min. 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5
-
-
-
-
-
-
-
-
-
-
-
-25 Min.
-20 Typ. 15 15 15 15 15 15 15 15
-
-
-
-32
-32
-32
-32
-32
-32
-32
-32
-
Typ.
-89
-88
-87
-86
-82
-80
-75
-74
-
Max. 16.5 16.5 16.5 16.5 16.5 16.5 16.5 16.5
-20
-28
-40
-5
-8
-10
-13
-16
-19
-22
-25
+25 Max.
-82
-81
-79
-77
-74
-70
-66
-65
-
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm IEEE802.11g Items Standard Modulation Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 2. Spectrum Mask 1) fc +/- 11MHz 2) fc +/- 20MHz 3) fc > +/-30MHz 3. Modulation Accuracy (EVM) 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) 6Mbps (PER <10%) 2) 9Mbps (PER < 10%) 3) 12Mbps (PER < 10%) 4) 18Mbps (PER < 10%) 5) 24Mbps (PER < 10%) 6) 36Mbps (PER < 10%) 7) 48Mbps (PER < 10%) 8) 54Mbps (PER < 10%) 6. Maximum Input Level (PER < 10%) 12 COMPANY CONFIDENTIAL Contents IEEE802.11n HT20 OFDM CH1 to CH13 MCS0~7 Typ. Max. 14 14 14 14 14 14 14 14
-
-
-
-32
-32
-32
-32
-32
-32
-32
-32
-
Typ.
-89
-87
-85
-80
-78
-75
-72
-71
-
15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5
-20
-28
-45
-5
-10
-13
-16
-19
-22
-25
-27
+25 Max.
-82
-79
-77
-74
-70
-66
-65
-64
-
Min. 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5
-
-
-
-
-
-
-
-
-
-
-
-25 Min.
-
-
-
-
-
-
-
-
-20 Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm IEEE802.11n HT20-2.4G Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 2. Spectrum Mask 1) fc +/- 11MHz 2) fc +/- 20MHz 3) fc > +/-30MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) 13 IEEE802.11n HT40-2.4G Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 2. Spectrum Mask 1) fc +/- 21MHz 2) fc +/- 40MHz 3) fc > +/-60MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) COMPANY CONFIDENTIAL Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm Contents IEEE802.11n HT40 OFDM CH3~CH9 MCS0~MCS7 Min. Typ. Max. 13 13 13 13 13 13 13 13
-
-
-
-30
-30
-30
-30
-30
-30
-30
-30
-
Typ.
-86
-84
-81
-18
-75
-72
-70
-69
-
14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5
-20
-28
-45
-5
-10
-13
-16
-19
-22
-25
-27
+25 Max.
-79
-76
-74
-71
-67
-63
-62
-61
-
11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5
-
-
-
-
-
-
-
-
-
-
-
-25 Min.
-
-
-
-
-
-
-
-20 14 COMPANY CONFIDENTIAL Contents IEEE802.11a OFDM CH36~CH48, CH52~CH64, CH100~CH165 6, 9, 12, 18, 24, 36, 48, 54Mbps Min. 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5
-
-
-
-
-
-
-
-
-
-
-
-20 Min.
-
-
-
-
-
-
-
-
-30 Typ. 15 15 15 15 15 15 15 15
-
-
-
-24
-25
-25
-25
-25
-25
-27
-30
-
Typ.
-87
-86
-84
-82
-79
-74
-72
-71
-
Max. 16.5 16.5 16.5 16.5 16.5 16.5 16.5 16.5
-20
-28
-40
-5
-8
-10
-13
-16
-19
-22
-25
+20 Max.
-82
-81
-79
-77
-74
-70
-66
-65
-
Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm IEEE802.11a Items Standard Modulation Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 2. Spectrum Mask 1) fc +/- 11MHz 2) fc +/- 20MHz 3) fc > +/-30MHz 3. Modulation Accuracy (EVM) 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) 6Mbps (PER <10%) 2) 9Mbps (PER < 10%) 3) 12Mbps (PER < 10%) 4) 18Mbps (PER < 10%) 5) 24Mbps (PER < 10%) 6) 36Mbps (PER < 10%) 7) 48Mbps (PER < 10%) 8) 54Mbps (PER < 10%) 6. Maximum Input Level (PER < 10%) 15 IEEE802.11n HT20-5G Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 3. Spectrum Mask 1) fc +/- 11MHz 2) fc +/- 20MHz 3) fc > +/-30MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) COMPANY CONFIDENTIAL Contents IEEE802.11n HT20 OFDM CH36~CH48, CH52~CH64, CH100~CH165 Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm Min. Typ. Max. MCS0~7 14 14 14 14 14 14 14 14
-
-
-
-30
-30
-30
-30
-30
-30
-30
-30
-
Typ.
-86
-84
-81
-78
-74
-70
-69
-68
-
15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5
-20
-28
-40
-5
-10
-13
-16
-19
-22
-25
-27
+20 Max.
-82
-79
-77
-74
-70
-66
-65
-64
-
12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5
-
-
-
-
-
-
-
-
-
-
-
-20 Min.
-
-
-
-
-
-
-
-
-30 16 IEEE802.11n HT40-5G Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 2. Spectrum Mask 1) +/- 21MHz 2) +/- 40MHz 3) > +/-60MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) COMPANY CONFIDENTIAL Unit dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm Contents IEEE802.11n HT40 OFDM CH38~CH62, CH102~CH159 MCS0~MCS7 Min. Typ. Max. 13 13 13 13 13 13 13 13
-
-
-
-30
-30
-30
-30
-30
-30
-30
-30
-
Typ.
-84
-81
-79
-76
-72
-67
-66
-65
-
14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5
-20
-28
-40
-5
-10
-13
-16
-19
-22
-25
-27
+20 Max.
-79
-76
-74
-71
-67
-63
-62
-61
-
11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5
-
-
-
-
-
-
-
-
-
-
-
-20 Min.
-
-
-
-
-
-
-
-
-30 17 IEEE802.11ac VHT20 Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 2. Spectrum Mask 1) fc +/-11MHz 2) fc +/-20MHz 3) fc > +/-30MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 9) MCS8 (PER < 10%) 6. Maximum Input Level (PER < 10%) COMPANY CONFIDENTIAL Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm Contents IEEE802.11ac VHT20 OFDM CH36~CH48, CH52~CH64, CH100~CH165 Min. Typ. Max. MCS0~MCS8 8 8 8 8 8 8 8 8 8
-
-
-
-33
-33
-33
-33
-33
-33
-33
-33
-33
-
Typ.
-89
-85
-83
-80
-75
-72
-71
-70
-66
-
9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5
-20
-28
-40
-5
-10
-13
-16
-19
-22
-25
-27
-30
+20 Max.
-82
-79
-77
-74
-70
-66
-65
-64
-59
-
6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5
-
-
-
-
-
-
-
-
-
-
-
-
-20 Min.
-
-
-
-
-
-
-
-
-
-30 18 IEEE802.11ac VHT40 Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 10) MCS9 2. Spectrum Mask 1) fc +/-21MHz 2) fc +/-40MHz 3) fc > +/-60MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 10) MCS9 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 9) MCS8 (PER < 10%) 10) MCS9 (PER < 10%) 6. Maximum Input Level (PER < 10%) COMPANY CONFIDENTIAL Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm Contents IEEE802.11ac VHT40 OFDM CH38~CH62, CH102~CH159 MCS0~MCS9 Min. Typ. Max. 8 8 8 8 8 8 8 8 8 8
-30
-37
-50
-33
-33
-33
-33
-33
-33
-33
-33
-33
-33
-
Typ.
-86
-83
-81
-77
-73
-70
-69
-66
-64
-62
-
9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5
-20
-28
-40
-5
-10
-13
-16
-19
-22
-25
-27
-30
-32
+20 Max.
-79
-76
-74
-71
-67
-63
-62
-61
-56
-54
-
6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5
-
-
-
-
-
-
-
-
-
-
-
-
-
-20 Min.
-
-
-
-
-
-
-
-
-
-
-30 19 IEEE802.11ac VHT80 Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 10) MCS9 2. Spectrum Mask 1) +/-41MHz 2) +/-80MHz 3) +/-120MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 10) MCS9 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 9) MCS8 (PER < 10%) 10) MCS9 (PER < 10%) 6. Maximum Input Level (PER < 10%) COMPANY CONFIDENTIAL Contents IEEE802.11ac VHT80 OFDM CH42,CH58,CH106,CH122,CH138,CH155 Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBr dBr dBr dB dB dB dB dB dB dB dB dB dB ppm Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm Min. Typ. Max. MCS0~MCS9 8 8 8 8 8 8 8 8 8 8
-25
-33
-45
-33
-33
-33
-33
-33
-33
-33
-33
-33
-33
-
Typ.
-82
-79
-77
-74
-70
-66
-65
-64
-59
-57
-
9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5
-20
-28
-40
-5
-10
-13
-16
-19
-22
-25
-27
-30
-32
+20 Max.
-76
-73
-71
-68
-64
-60
-59
-58
-53
-51
-
6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5
-
-
-
-
-
-
-
-
-
-
-
-
-
-20 Min.
-
-
-
-
-
-
-
-
-
-
-30 20 Bluetooth 4.0 Items Standard Modulation COMPANY CONFIDENTIAL Contents Bluetooth 4.0 Basic rate (BR), Enhanced data rate (EDR). Bluetooth low energy (BLE). 1Mbps(GFSK), Channel Channel spacing Duplex transmission TX Characteristics - BR 1. Power Levels 1Mbps (GFSK) 2. Frequency Tolerance Initial center frequency 3. Carrier Frequency Drift Maximum drift rate within 50us DH1 (Maximum length 1-slot packet) DH3 (Maximum length 3-slot packet) DH5 (Maximum length 5-slot packet) 4. Modulation Characteristic (Frequency deviations) f1avg f2max f2avg/
f1avg/ Ratio
/4-DQPSK
/4-DQPSK) TX Characteristics - EDR 1. Power Levels 2Mbps(
3Mbps(8-DPSK) 2.Carrier Frequency Stability and Modulation Accuracy 2Mbps:
Packet Initial Frequency Error: i Block Frequency Error: 0 Total Frequency Error: i + 0 RMS DEVM Peak DEVM 99% DEVM (% Symbols <=0.3) 3Mbps: 8-DPSK Initial Frequency Error: i Frequency Error: 0 Block Frequency Error: i + 0 RMS DEVM Peak DEVM 99% DEVM (% Symbols <=0.13) 3. Differential Phase Encoding 2Mbps(
3Mbps(8-DPSK) TX Characteristics - BLE 1. Power Levels 1Mbps(GFSK) 2. Modulation Characteristic (Frequency deviations)
/4-DQPSK) f1avg f2max f2avg/f1avg Ratio 3. Carrier frequency offset and drift fn fTX, n = 0, 1, 2, 3...k
|f0 fn|, n = 2, 3, 4...k 2Mbps(
/4-DQPSK), 3Mbps(8-DPSK) 2.402GHz ~ 2.480GHz (CH0~CH78) 1 MHz for BR,EDR, 2MHz for LE Time-Division Duplex (TDD) scheme Unit Max. Typ. Min. 5
-75
-20
-25
-40
-40 140 115 0.80 Min. 5 5
-75
-10
-75
-
-
99%
-75
-10
-75
-
-
99%
99%
99%
Min.
-2 225 185 0.8
-150
-
7 3.2
-4.5
-3 0 0 164 140 0.89 Typ. 7 7 1.1 2.9 4 0.05 0.15 100%
1.4 2.8 4.2 0.05 1.15 100%
100%
100%
Typ. 0 253 227 0.92 2.57 1.41 21 9 75 20 25 40 40 175
-
-
Max. 9 9 75 10 75 0.2 0.35
-
75 10 75 0.13 0.25
-
-
-
Max.
+2 275
-
-
+150 50 dBm kHz kHz/50us kHz kHz kHz kHz kHz Unit dBm dBm kHz kHz kHz kHz kHz kHz Unit dBm kHz kHz kHz kHz
|f1 f0|
|fn fn-5|, n = 6, 7, 8...k COMPANY CONFIDENTIAL
-
-
0.98 0.49 20 20 kHz kHz Min. Typ. Max. Unit
-
-
-
-
-20
-20
-20
-20
-88
-88
-84
-80
-
-
-
-
-70
-70
-70
-70
-
-
-
-
dBm dBm dBm dBm dBm dBm dBm dBm RX Characteristics 1. Minimum Input Level Sensitivity GFSK (1Mbps) (BER 0.1%)
/4 DQPSK (2Mbps) (BER 0.1%) 0.1%) 8DPSK (3Mbps) (BER GFSK (1Mbps) BLE (BER< 30.8%) 2. Maximum Input Level GFSK (1Mbps) (BER 0.1%)
/4 DQPSK (2Mbps) (BER 0.1%) 8DPSK (3Mbps) (BER GFSK (1Mbps) BLE (BER< 30.8%) 0.1%) 22 COMPANY CONFIDENTIAL 6. Schematics design 23 COMPANY CONFIDENTIAL 24 COMPANY CONFIDENTIAL 25 COMPANY CONFIDENTIAL 7. Software Requirement Marvell is the owner for driver and Firmware release. 26 COMPANY CONFIDENTIAL 8. Packing Specification 27 COMPANY CONFIDENTIAL 9. Environmental Requirements 1> Operating Temperature Conditions The product shall be capable of continuous reliable operation when operating in ambient temperature of 0C to 60C. 2> Non-Operating Temperature Conditions Neither subassemblies shall be damaged nor shall the operational performance be degraded when restored to the operating temperature when exposed to storage temperature in the range of -20C to +85C. 3> Operating Humidity Conditions The product shall be capable of continuous reliable operation when subjected to relative humidity in the range of 0% and 90% non-condensing. 4> Non-Operating Humidity conditions The product shall not be damaged nor shall the performance be degraded after exposure to relative humidity. 5> Terminals The product is mounted with motherboard through Land Grid Array. In order to prevent poor soldering, Please do not touch LGA portion by hand. 6> Falling It will cause damage on the mounted components when the product is falling or receiving drop shock. It may cause the product mal-function. 28 COMPANY CONFIDENTIAL 10. Soldering and reflow condition Reflow soldering shall be done according to the below temperature profile. 29 COMPANY CONFIDENTIAL 10 Package information TBD 39 Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes:
(Pour utilisation de dispositif module) 1) L'antenne doit tre installe de telle sorte qu'une distance de 20 cm est respecte entre l'antenne et les utilisateurs, et 2) Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformit supplmentaires requis pour ce module install. IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE:
Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains IC: 2878D-T77H506. Plaque signaltique du produit final Ce module metteur est autoris uniquement pour une utilisation dans un dispositif o l'antenne peut tre installe de telle sorte qu'une distance de 20cm peut tre maintenue entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante: "Contient des IC: 2878D-T77H506". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this 39 manual. Manuel d'information l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires requises et avertissements comme indiqu dans ce manuel. Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and
(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.
(iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:
Le guide dutilisation des dispositifs pour rseaux locaux doit inclure des instructions prcises sur les restrictions susmentionnes, notamment :
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
(ii) le gain maximal dantenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5 725 MHz doit se conformer la limite de p.i.r.e.;
(iii) le gain maximal dantenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se conformer la limite de p.i.r.e. spcifie pour lexploitation point point et non point point, selon le cas.
(iv) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. DETACHABLE ANTENNA USAGE This device has been designed to operate with an antenna having a maximum gain of [-0.6]
dB. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter (IC: 2878D-T77H506 / Model: T77H506) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Ce dispositif a t conu pour fonctionner avec une antenne ayant un gain maximal de dB
[-0.6]. Une antenne gain plus lev est strictement interdite par les rglements d'Industrie Canada. L'impdance d'antenne requise est de 50 ohms. 40 Conformment la rglementation d'Industrie Canada, le prsent metteur radio peutfonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pourl'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que lapuissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. Le prsent metteur radio (IC: 2878D-T77H506 / Modle: T77H506) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. For Taiwan:
5.25-5.35 1. 2. XXXyyyLPDzzzz-x 41
1 2 3 | Internal Photos | Internal Photos | 314.72 KiB | July 15 2014 / October 15 2014 |
Report No.: 140606E01 Page 2 Report No.: 140606E01 Page 3
1 2 3 | External Photos | External Photos | 561.44 KiB | July 15 2014 / October 15 2014 |
CONSTRUCTION PHOTOS OF EUT EUT Report No.: 140606E01 Page 1 Report No.: 140606E01 Page 4 Report No.: 140606E01 Page 5 Report No.: 140606E01 Page 6 Report No.: 140606E01 Page 7
1 2 3 | Label and Location | ID Label/Location Info | 36.73 KiB | July 15 2014 |
FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label
(Fig. 1) FCC ID: MCLT77H526 IC: 2878D-T77H526
1 2 3 | Attestation (Channel and Mode Declaration) | Attestation Statements | 22.10 KiB | July 15 2014 |
HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. Date: 2014/6/24 G E N E R A L D E C L A R A T I O N We, HON HAI PRECISION IND. CO., LTD. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: MCLT77H526 If you have any questions regarding the authorization, please dont hesitate to contact us. Thank you!
Signature:
Rio Chen Compliance Manager HON HAI PRECISION IND. CO., LTD. TEL: +886-3-5784975 FAX: +886-3-5775100 E-mail: rio.chen@foxconn.com
1 2 3 | Attestation (DFS Client Declaration) | Attestation Statements | 71.51 KiB | July 15 2014 |
HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. Declaration for DFS client devices Date: 2014/6/24 FCC ID: MCLT77H526 Dear Examiner:
Per KDB# 848637, We, Hon Hai PRECISION IND.CO.,LTD declare that following description truly represent our product in consideration. Please do not hesitate to contact us, if further info is required. Thanks. a). A channel/frequency plan for the device showing the channels that have active scanning or passive scanning. Active scanning is where the device can transmit a probe (beacon) and passive scanning is where the device can listen only without probes. Below is the channel / frequency plan for the device CH Frequency (MHz) 2412 Scan Type CH 36 Frequency (MHz) 5180 3 1 2422 4 2427 2 2417 11 2462 Active Active Active Active Active Active Active Active Active Active Active 60 5300 Active Active Active Active Active Active Passive Passive Passive Passive Passive 40 5200 54 5270 56 5280 38 5190 42 5210 44 5220 48 5240 52 5260 58 5290 5 2432 6 2437 7 2442 10 2457 2447 2452 8 9 Scan Type CH 62 Frequency (MHz) 5310 64 5320 Scan Type Passive Passive CH 100 Frequency (MHz) 5500 136 5680 Passive Passive Passive Passive Passive Passive Passive Passive Passive Passive Passive 104 5520 116 5580 132 5660 102 5510 106 5530 108 5540 110 5550 112 5560 134 5670 Scan Type CH 140 Frequency (MHz) 5700 Passive Scan Type CH 149 Frequency (MHz) 5745 165 5825 Active Active Active Active Active Active Active Active 153 5765 151 5755 155 5775 157 5785 159 5795 161 5805 Scan Type b). For client devices that have software configuration control to operate in different modes
(active scanning in some and passive scanning in others) or in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies), or modular devices that configure the modes of operations through software; the applicant must provide in the application software and operations description that discuss how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by an end user or an installer. Also, include an attestation that the device complies with the requirements for software configuration control as discussed in KDB #594280. On DFS channels, the WLAN driver on the device operates under the control of an AP at all times, except when in ad-hoc mode, on US non-DFS channels. As described in the answer to question a, the device passively scans DFS frequencies until a master device is detected. The control of this functionality is not accessible to anyone under any conditions. Furthermore, the firmware is locked by proprietary password and cannot be changed or modified by end user. If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!
Signature:
Rio Chen Compliance Manager HON HAI PRECISION IND. CO., LTD. TEL: +886-3-5784975 FAX: +886-3-5775100 E-mail: rio.chen@foxconn.com
1 2 3 | Confidentiality Request (Shortterm) | Cover Letter(s) | 18.59 KiB | July 15 2014 |
HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. Federal Communications Commission Authorization and Evaluation Division Date: July 10, 2014 Confidentiality Request FCC ID: MCLT77H526 Pursuant to DA 04-1705 of the Commissions Rules, we request short-term confidential treatment for the following information until Oct. 15, 2014 of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:
External Photos Test Setup Photos Users Manual Internal Photo Thank you!
Sincerely yours,
-------------------------------------------------------
Rio Chen Compliance Manager HON HAI PRECISION IND. CO., LTD. TEL: +886-3-5784975 FAX: +886-3-5775100 E-mail: rio.chen@foxconn.com
1 2 3 | Confidentiality Request | Cover Letter(s) | 17.84 KiB | July 15 2014 |
HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. Date:2014/6/24 FCC ID: MCLT77H526 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:
Schematics Block Diagram Software Operating Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, Rio Chen Compliance Manager HON HAI PRECISION IND. CO., LTD. TEL: +886-3-5784975 FAX: +886-3-5775100 E-mail: rio.chen@foxconn.com
1 2 3 | Cover Letter (Agent Authorization) | Cover Letter(s) | 30.13 KiB | July 15 2014 |
HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. A G E N C Y A U T H O R I Z A T I O N L E T T E R Date: 2014/6/24 To whom it may concern:
We, the undersigned, , HON HAI PRECISION IND. CO., LTD. hereby authorize Bureau Veritas Consumer Products Services (H.K) Ltd., Taoyuan Branch. of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C+15E approval and any communication needed with the national authority. Any and all acts carried out by Bureau Veritas Consumer Products Services (H.K) Ltd., Taoyuan Branch. on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please dont hesitate to contact us. Thank you!
Sincerely yours, Signature:
Rio Chen Compliance Manager HON HAI PRECISION IND. CO., LTD. TEL: +886-3-5784975 FAX: +886-3-5775100 E-mail: rio.chen@foxconn.com
1 2 3 | Cover Letter (Modular Approval) | Cover Letter(s) | 18.21 KiB | July 15 2014 |
FCC ID: MCLT77H526 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch July 15, 2014 Dear Application Examiner, Hon Hai PRECISION IND.CO.,LTD., 802.11ac+802.11abgn + BT4.0+BT3.0+BT2.1/EDR Module, FCC ID: MCLT77H526, would like to have your authorization as a modular approval specific to the mobile RF exposure condition. The requirements of Public Notice DA00-1407 have been met and shown on the following statements. 1. The modular transmitter must have its own RF shielding. The radio portion of this module has been shielded, please see exhibition External Photo. The modular transmitter must have buffered modulation/data inputs. The EUT has buffered data inputs, it is integrated in chip 88W8897. The modular transmitter must have its own power supply regulation. The part number of this regulator is 88W8897. The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C). The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. The modular transmitter must be tested in a stand-alone configuration The EUT was tested in a stand-alone configuration via a USB extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. The modular transmitter must be labeled with its own FCC ID number. Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. The modular transmitter must comply with any applicable RF exposure requirements. The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. 2. 3. 4. 5. 6. 7. 8. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Hank Chung Assistant Manager Bureau Veritas Consumer Products Services (H.K.) Ltd., Hsinchu Branch Report No.: RF140606E01
1 2 3 | RF Exposure Info (MPE) | RF Exposure Info | 393.44 KiB | July 15 2014 |
RF EXPOSURE REPORT REPORT NO.: SA140606E01 MODEL NO.: T77H526 FCC ID: MCLT77H526 RECEIVED: June 06, 2014 TESTED: July 01 to 02, 2014 ISSUED: July 09, 2014 APPLICANT: Hon Hai PRECISION IND.CO.,LTD ADDRESS: 5F-1, Hsin-An Road, Hsinchu, Science Industrial Park, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services
(H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA140606E01 Report Format Version 5.0.0 1 of 9 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT ............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. ANTENNA GAIN ...................................................................................................... 6 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .......................... 7 Report No.: SA140606E01 2 of 9 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. SA140606E01 REASON FOR CHANGE Original release DATE ISSUED July 09, 2014 Report No.: SA140606E01 3 of 9 Report Format Version 5.0.0 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY
(mW/cm2) AVERAGE TIME
(minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 1500-100,000 F = Frequency in MHz F/1500 1.0 30 30 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA140606E01 5 of 9 Report Format Version 5.0.0 5. ANTENNA GAIN The antennas provided to the EUT, please refer to the following table:
Antenna No. Transmitter Circuit Brand Model 1 Chain (0) Wistron Neweb Corporation DC33001KT00
(Main port) 2 Chain (1) Wistron Neweb Corporation DC33001KT10
(Aux port) Antenna Gain(dBi)
<include cable loss>
Cable Loss
(dB) 1.54 1.26 0.57 1.23 0.63 0.16 0.35 1.84 1.38 1.98 2.04 2.08 2.13 3.11 3.21 3.27 Frequency range
(MHz to MHz) 2400~2500 5150~5350 5470~5725 5725~5850 2400~2500 5150~5350 5470~5725 5725~5850 Antenna Type Connecter Type Cable Length
(mm) PIFA I-PEX 363 PIFA I-PEX 593 Report No.: SA140606E01 6 of 9 Report Format Version 5.0.0 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For WLAN: 15.247(2.4GHz) 802.11b FREQUENCY CONDUCTED DISTANCE ANTENNA
(MHz) 2412 - 2462 POWER
(mW) 113.018 NOTE: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 4.11dBi. 802.11g FREQUENCY CONDUCTED ANTENNA DISTANCE
(MHz) 2412 - 2462 POWER
(mW) 606.691 NOTE: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 4.11dBi. 802.11n (HT20) FREQUENCY CONDUCTED ANTENNA NOTE: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 4.11dBi. 802.11n (HT40) FREQUENCY CONDUCTED ANTENNA BAND
(MHz) 2412 - 2462 POWER
(mW) 603.594 BAND
(MHz) 2422 - 2452 POWER
(mW) 472.94
(cm) 20
(cm) 20 DISTANCE
(cm) 20 DISTANCE
(cm) 20 GAIN
(dBi) 4.11 GAIN
(dBi) 4.11 GAIN
(dBi) 4.11 GAIN
(dBi) 4.11 POWER DENSITY
(mW/cm2) 0.05793 LIMIT
(mW/cm2) 1.00 POWER DENSITY
(mW/cm2) 0.31095 LIMIT
(mW/cm2) 1.00 POWER DENSITY
(mW/cm2) 0.30937 LIMIT
(mW/cm2) 1.00 POWER DENSITY
(mW/cm2) 0.24240 LIMIT
(mW/cm2) 1.00 NOTE: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 4.11dBi. Report No.: SA140606E01 7 of 9 Report Format Version 5.0.0 For WLAN: 15.407(5GHz) 802.11a FREQUENCY CONDUCTED
(MHz) POWER
(mW) ANTENNA GAIN
(dBi) DISTANCE
(cm) POWER DENSITY
(mW/cm2) LIMIT
(mW/cm2) 5180 - 5240, 5260 - 5320, 5500 5700 &
5745 - 5825 56.013 4.55 20 0.03177 1.00 NOTE: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 4.55dBi. 802.11ac (VHT20) FREQUENCY CONDUCTED ANTENNA DISTANCE
(MHz) POWER
(mW) GAIN
(dBi)
(cm) POWER DENSITY
(mW/cm2) LIMIT
(mW/cm2) 5180 - 5240, 5260 - 5320, 5500 5700 &
5745 - 5825 57.161 4.55 20 0.03242 1.00 NOTE: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 4.55dBi. 802.11ac (VHT40) FREQUENCY CONDUCTED ANTENNA DISTANCE
(MHz) POWER
(mW) GAIN
(dBi)
(cm) POWER DENSITY
(mW/cm2) LIMIT
(mW/cm2) 5190 - 5230, 5270 - 5310, 5510 5670 &
5755 - 5795 51.021 4.55 20 0.02894 1.00 NOTE: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 4.55dBi. 802.11ac (VHT80) FREQUENCY CONDUCTED ANTENNA DISTANCE
(MHz) POWER
(mW) GAIN
(dBi)
(cm) POWER DENSITY
(mW/cm2) LIMIT
(mW/cm2) 5210 - 5290, 5530, 5610 &
5775 50.873 3.47 20 0.02250 1.00 NOTE: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 3.47dBi. Report No.: SA140606E01 8 of 9 Report Format Version 5.0.0 For Bluetooth:
GFSK FREQUENCY
(MHz) 2402-2480 CONDUCTED POWER
(mW) 2.460 ANTENNA GAIN
(dBi) 1.54 DISTANCE
(cm) 20 8DPSK FREQUENCY
(MHz) 2402-2480 BT-LE (GFSK) FREQUENCY
(MHz) 2402 - 2480 CONDUCTED POWER
(mW) 5.000 ANTENNA GAIN
(dBi) 1.54 DISTANCE
(cm) 20 CONDUCTED POWER
(mW) 5.236 ANTENNA GAIN
(dBi) 1.54 DISTANCE
(cm) 20 POWER DENSITY
(mW/ cm2) 0.00070 POWER DENSITY
(mW/ cm2) 0.00142 POWER DENSITY
(mW/ cm2) 0.00149 LIMIT
(mW/cm2) 1.00 LIMIT
(mW/cm2) 1.00 LIMIT
(mW/cm2) 1.00 CONCLUSION:
Both of the Bluetooth and WLAN can transmit simultaneously, the formula of calculated the MPE is:
CPD1 / LPD1 + CPD2 / LPD2 + etc. < 1 CPD = Calculation power density LPD = Limit of power density For WLAN (2.4G) and Bluetooth:
Therefore, the worst-case situation is 0.31095 / 1 + 0.00149 / 1 = 0.312, which is less than 1. This confirmed that the device comply with FCC 1.1310 MPE limit. For WLAN (5G) and Bluetooth:
Therefore, the worst-case situation is 0.03242 / 1 + 0.00149 / 1 = 0.034, which is less than 1. This confirmed that the device comply with FCC 1.1310 MPE limit.
--- END ---
Report No.: SA140606E01 9 of 9 Report Format Version 5.0.0
1 2 3 | Test Report (DFS) | Test Report | 906.90 KiB | July 15 2014 |
DFS TEST REPORT REPORT NO.: RF140606E01-3 MODEL NO.: T77H526 FCC ID: MCLT77H526 RECEIVED: June 06, 2014 TESTED: June 30, 2014 ISSUED: July 09, 2014 APPLICANT: Hon Hai PRECISION IND.CO.,LTD. ADDRESS: 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services
(H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF140606E01-3 1 of 29 Report Format Version 5.2.0 Table of Contents RELEASE CONTROL RECORD .......................................................................................... 3 CERTIFICATION ...................................................................................................... 4 1. 2. EUT INFORMATION ................................................................................................. 5 OPERATING FREQUENCY BANDS AND MODE OF EUT ..................................... 5 2.1 EUT SOFTWARE AND FIRMWARE VERSION ....................................................... 5 2.2 2.3 DESCRIPTION OF AVAILABLE ANTENNAS TO THE EUT ..................................... 5 EUT MAXIMUM CONDUCTED POWER .................................................................. 6 2.4 EUT MAXIMUM EIRP POWER ................................................................................ 7 2.5 TRANSMIT POWER CONTROL (TPC) .................................................................... 8 2.6 2.7 STATEMENT OF MAUNFACTURER ....................................................................... 8 3. U-NII DFS RULE REQUIREMENTS ........................................................................ 9 3.1 WORKING MODES AND REQUIRED TEST ITEMS ............................................... 9 3.2 TEST LIMITS AND RADAR SIGNAL PARAMETERS ............................................ 11 TEST & SUPPORT EQUIPMENT LIST .................................................................. 15 4. TEST INSTRUMENTS ........................................................................................... 15 4.1 4.2 DESCRIPTION OF SUPPORT UNITS ................................................................... 15 TEST PROCEDURE .............................................................................................. 16 5. BVADT DFS MEASUREMENT SYSTEM: .............................................................. 16 5.1 5.2 CALIBRATION OF DFS DETECTION THRESHOLD LEVEL: ................................ 17 DEVIATION FROM TEST STANDARD .................................................................. 18 5.3 5.4 CONDUCTED TEST SETUP CONFIGURATION ................................................... 18 5.4.1 CLIENT WITHOUT RADAR DETECTION MODE .................................................. 18 TEST RESULTS ..................................................................................................... 19 6. SUMMARY OF TEST RESULTS ............................................................................ 19 6.1 6.2 DETAILED TEST RESULTS ................................................................................... 20 6.2.1 TEST MODE: DEVICE OPERATING IN CLIENT WITHOUT RADAR DETECTION MODE. .................................................................................................................. 20 6.2.1.1 DFS DETECTION THRESHOLD ........................................................................... 20 6.2.1.2 CHANNEL CLOSING TRANSMISSION AND CHANNEL MOVE TIME.................. 21 6.2.1.3 NON- OCCUPANCY PERIOD ................................................................................ 22 6.2.1.4 NON-ASSOCIATED TEST ..................................................................................... 24 6.2.1.5 NON- CO-CHANNEL TEST .................................................................................... 24 INFORMATION ON THE TESTING LABORATORIES ........................................... 25 7. APPENDIX-A .......................................................................................................... 26 8. APPENDIX B - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES 9. TO THE EUT BY THE LAB ...................................................................................... 29 Report No.: RF140606E01-3 2 of 29 Report Format Version 5.2.0 RELEASE CONTROL RECORD ISSUE NO. RF140606E01-3 Original release REASON FOR CHANGE DATE ISSUED July 09, 2014 Report No.: RF140606E01-3 3 of 29 Report Format Version 5.2.0 2. EUT INFORMATION 2.1 OPERATING FREQUENCY BANDS AND MODE OF EUT TABLE 1: OPERATING FREQUENCY BANDS AND MODE OF EUT OPERATING FREQUENCY RANGE OPERATIONAL MODE 5250~5350MHz 5470~5725MHz Client without radar detection and ad hoc function 2.2 EUT SOFTWARE AND FIRMWARE VERSION TABLE 2: THE EUT SOFTWARE/FIRMWARE VERSION PLATFORM NO. PRODUCT MODEL NO. SOFTWARE/FIRMWARE VERSION Fedora OS 1 802.11ac+802.11abgn +
BT4.0+BT3.0+BT2.1/EDR Module T77H526 SD8897-15.68.4.p41-C3X15C020-
GPL-(FP68) 2.3 DESCRIPTION OF AVAILABLE ANTENNAS TO THE EUT TABLE 3: ANTENNA LIST Antenna No. Transmitter Circuit Brand Model 1 Chain (0) Wistron Neweb Corporation DC33001KT00
(Main port) 2 Chain (1) Wistron Neweb Corporation DC33001KT10
(Aux port) Antenna Gain(dBi)
<include cable loss>
Cable Loss
(dB) 1.54 1.26 0.57 1.23 0.63 0.16 0.35 1.84 1.38 1.98 2.04 2.08 2.13 3.11 3.21 3.27 Frequency range
(MHz to MHz) 2400~2500 5150~5350 5470~5725 5725~5850 2400~2500 5150~5350 5470~5725 5725~5850 Antenna Connecter Type Type Cable Length
(mm) PIFA I-PEX 363 PIFA I-PEX 593 Report No.: RF140606E01-3 5 of 29 Report Format Version 5.2.0 2.4 EUT MAXIMUM CONDUCTED POWER TABLE 4: THE MEASURED CONDUCTED OUTPUT POWER IEEE 802.11a Ant. Set No. FREQUENCY BAND (MHz) 1 1 5250~5350 5470~5725 IEEE 802.11ac (VHT20) Ant. Set No. FREQUENCY BAND (MHz) 1 1 5250~5350 5470~5725 IEEE 802.11ac (VHT40) Ant. Set No. FREQUENCY BAND (MHz) MAX. POWER OUTPUT POWER(dBm) OUTPUT POWER(mW) 17.17 17.07 52.126 50.94 MAX. POWER OUTPUT POWER(dBm) OUTPUT POWER(mW) 17.10 17.06 51.231 50.763 MAX. POWER OUTPUT POWER(dBm) OUTPUT POWER(mW) 1 1 5250~5350 5470~5725 16.6 16.85 45.66 48.381 IEEE 802.11ac (VHT80) Ant. Set No. FREQUENCY BAND (MHz) MAX. POWER OUTPUT POWER(dBm) OUTPUT POWER(mW) 1 1 5250~5350 5470~5725 12.34 17.06 17.125 50.873 Report No.: RF140606E01-3 6 of 29 Report Format Version 5.2.0 2.5 EUT MAXIMUM EIRP POWER TABLE 5: THE EIRP OUTPUT POWER LIST IEEE 802.11a Ant. Set No. FREQUENCY BAND (MHz) 1 1 5250~5350 5470~5725 IEEE 802.11ac (VHT20) Ant. Set No. FREQUENCY BAND (MHz) 1 1 5250~5350 5470~5725 IEEE 802.11ac (VHT40) Ant. Set No. FREQUENCY BAND (MHz) 1 1 5250~5350 5470~5725 IEEE 802.11ac (VHT80) Ant. Set No. FREQUENCY BAND (MHz) MAX. POWER OUTPUT POWER(dBm) OUTPUT POWER(mW) 18.43 17.64 69.671 58.084 MAX. POWER OUTPUT POWER(dBm) OUTPUT POWER(mW) 18.36 17.63 68.475 57.882 MAX. POWER OUTPUT POWER(dBm) OUTPUT POWER(mW) 17.86 17.42 61.029 55.126 MAX. POWER OUTPUT POWER(dBm) OUTPUT POWER(mW) 1 1 5250~5350 5470~5725 13.6 17.63 22.889 58.008 Report No.: RF140606E01-3 7 of 29 Report Format Version 5.2.0 2.6 TRANSMIT POWER CONTROL (TPC) U-NII devices operating in the 5.25-5.35 GHz band and the 5.47-5.725 GHz band shall employ a TPC mechanism. The U-NII device is required to have the capability to operate at least 6 dB below the mean EIRP value of 30 dBm. A TPC mechanism is not required for systems with an EIRP of less than 500 mW. Maximum EIRP of this device is 69.671mW which less than 500mW, therefore its not require TPC function. 2.7 STATEMENT OF MAUNFACTURER This device (Client) is without radar detection, then the manufacturer statement confirming that information regarding the parameters of the detected Radar Waveforms is not available to the end user. And the device doesnt have Ad Hoc mode on DFS frequency band. Report No.: RF140606E01-3 8 of 29 Report Format Version 5.2.0 3. U-NII DFS RULE REQUIREMENTS 3.1 WORKING MODES AND REQUIRED TEST ITEMS The manufacturer shall state whether the UUT is capable of operating as a Master and/or a Client. If the UUT is capable of operating in more than one operating mode then each operating mode shall be tested separately. See tables 6 and 7 for the applicability of DFS requirements for each of the operational modes. TABLE 6: APPLICABILITY OF DFS REQUIREMENTS PRIOR TO USE A CHANNEL Requirement Master Non-Occupancy Period DFS Detection Threshold Channel Availability Check Time U-NII Detection Bandwidth Operational Mode Client without radar detection Not required Not required Not required Not required Client with radar detection Not required Report No.: RF140606E01-3 9 of 29 Report Format Version 5.2.0 TABLE 7: APPLICABILITY OF DFS REQUIREMENTS DURING NORMAL OPERATION Operational Mode Requirement Master or Client with radar detection DFS Detection Threshold Channel Closing Transmission Time Channel Move Time U-NII Detection Bandwidth Client without radar detection Not required Not required detection radar detection Client without radar Master or Client with Additional requirements for devices with multiple bandwidth modes U-NII Detection Bandwidth and Statistical Performance Check Channel Move Time and Channel Closing Transmission Time All other tests Not required Note: Frequencies selected for statistical performance check (Section 7.8.4) should include several frequencies within the radar detection bandwidth and frequencies near the edge of the radar detection bandwidth. For 802.11 devices it is suggested to select frequencies in all 20 MHz channel blocks and a null frequencies between the bonded 20 MHz channel blocks. All BW modes must be tested Test using widest BW mode available Any single BW mode Test using the widest BW mode available for the link Not required Report No.: RF140606E01-3 10 of 29 Report Format Version 5.2.0 3.2 TEST LIMITS AND RADAR SIGNAL PARAMETERS DETECTION THRESHOLD VALUES TABLE 8: DFS DETECTION THRESHOLDS FOR MASTER DEVICES AND CLIENT DEVICES WITH RADAR DETECTION Maximum Transmit Power Value
(See Notes 1, 2, and 3)
-64 dBm EIRP 200 milliwatt EIRP < 200 milliwatt and power spectral density < 10 dBm/MHz EIRP < 200 milliwatt that do not meet the power spectral density requirement Note 1: This is the level at the input of the receiver assuming a 0 dBi receive antenna. Note 2: Throughout these test procedures an additional 1 dB has been added to the amplitude of the test transmission waveforms to account for variations in measurement equipment. This will ensure that the test signal is at or above the detection threshold level to trigger a DFS response. Note3: EIRP is based on the highest antenna gain. For MIMO devices refer to KDB Publication 662911 D01.
-62 dBm
-64 dBm Report No.: RF140606E01-3 11 of 29 Report Format Version 5.2.0 TABLE 9: DFS RESPONSE REQUIREMENT VALUES Parameter Non-occupancy period Channel Availability Check Time Channel Move Time Channel Closing Transmission Time U-NII Detection Bandwidth Value Minimum 30 minutes 60 seconds 10 seconds See Note 1. 200 milliseconds + an aggregate of 60 milliseconds over remaining 10 second period. See Notes 1 and 2. Minimum 100% of the U-NII 99% transmission power bandwidth. See Note 3 Note 1: Channel Move Time and the Channel Closing Transmission Time should be performed with Radar Type 0. The measurement timing begins at the end of the Radar Type 0 burst. Note 2: The Channel Closing Transmission Time is comprised of 200 milliseconds starting at the beginning of the Channel Move Time plus any additional intermittent control signals required to facilitate a Channel move (an aggregate of 60 milliseconds) during the remainder of the 10 second period. The aggregate duration of control signals will not count quiet periods in between transmissions. Note 3: During the U-NII Detection Bandwidth detection test, radar type 0 should be used. For each frequency step the minimum percentage of detection is 90 percent. Measurements are performed with no data traffic. Report No.: RF140606E01-3 12 of 29 Report Format Version 5.2.0 PARAMETERS OF DFS TEST SIGNALS Step intervals of 0.1 microsecond for Pulse Width, 1 microsecond for PRI, 1 MHz for chirp width and 1 for the number of pulses will be utilized for the random determination of specific test waveforms. TABLE 10: SHORT PULSE RADAR TEST WAVEFORMS Radar Type Pulse Width
(sec) 0 1 1 1 PRI
(sec) 1428 Number of Pulses Minimum Percentage of Successful Detection Minimum Number of Trials 18 See Note 1 See Note 1 60%
30 23-29 16-18 60%
60%
30 30 Test A: 15 unique PRI values randomly selected from the list of 23 PRI values in Table 5a
------------------------
Test B: 15 unique PRI values randomly selected within the range of 518-3066 sec, with a minimum increment of 1 sec, excluding PRI values selected in Test A 150-230 200-500 2 3 1-5 6-10 4 11-20 200-500 30 120 Note 1: Short Pulse Radar Type 0 should be used for the detection bandwidth test, channel move time, and channel closing time tests. Aggregate (Radar Types 1-4) 60%
80%
12-16 Report No.: RF140606E01-3 13 of 29 Report Format Version 5.2.0 RADAR TYPE PULSE WIDTH
(sec) CHIRP WIDTH
(MHz) TABLE 11: LONG PULSE RADAR TEST WAVEFORM MINIMUM PRI
(sec) NUMBER OF PULSES PER BURST NUMBER OF BURSTS PERCENTAGE OF SUCCESSFUL DETECTION MINIMUM NUMBER OF TRIALS 5 50-100 5-20 1000-2000 1-3 8-20 80%
30 TABLE 12: FREQUENCY HOPPING RADAR TEST WAVEFORM RADAR TYPE PULSE WIDTH
(sec) PRI
(sec) PULSES PER HOP HOPPING RATE
(kHz) HOPPING SEQUENCE LENGTH
(msec) MINIMUM PERCENTAGE OF SUCCESSFUL DETECTION MINIMUM NUMBER OF TRIALS 6 1 333 9 0.333 300 70%
30 Report No.: RF140606E01-3 14 of 29 Report Format Version 5.2.0 4. TEST & SUPPORT EQUIPMENT LIST 4.1 TEST INSTRUMENTS TABLE 13: TEST INSTRUMENTS LIST. DESCRIPTION &
MANUFACTURER MODEL NO. Spectrum Analyzer R&S FSW8 Vector Signal Generator R&S SMJ100A SERILA NO. 101497 101878 CALIBRATED DATE CALIBRATED UNTIL Aug.07.2013 Aug 13, 2013 Aug 06, 2014 Aug 12, 2014 4.2 DESCRIPTION OF SUPPORT UNITS TABLE 14: SUPPORT UNIT INFORMATION. NO. PRODUCT BRAND MODEL NO. ID SPEC. 1 WIRELESS AC MODULE D-Link WMC-AC01 RRK2012060056-1 The maximum EIRP is 27.64 dBm, Antenna Gain is 3.428dBi Slave device during the DFS test. NOTE: This device was functioned as a Master TABLE 15: SOFTWARE/FIRMWARE INFORMATION. NO. PRODUCT MODEL NO. SOFTWARE/FIRMWARE VERSION 1. WIRELESS AC MODULE WMC-AC01 1.00 Wed 06 Mar 2013 Note: This module WMC-AC01 was installed in the DIR-868L AP. Report No.: RF140606E01-3 15 of 29 Report Format Version 5.2.0 Control PC Spectrum Analyzer Radar Signal Generating 5. TEST PROCEDURE 5.1 BVADT DFS MEASUREMENT SYSTEM:
A complete BVADT DFS Measurement System consists of two subsystems: (1) the Radar Signal Generating Subsystem and (2) the Traffic Monitoring Subsystem. The control PC is necessary for generating the Radar waveforms in Table 10, 11 and 12. The traffic monitoring subsystem is specified to the type of unit under test (UUT). CONDUCTED SETUP CONFIGURATION OF ADT DFS MEASUREMENT SYSTEM The test transmission will always be from the Master Device to the Client Device. While the Client device is set up to associate with the Master device and play the MPEG file (6 Magic Hours) from Master device, the designated MPEG test file and instructions are located at:
http://ntiacsd.ntia.doc.gov/dfs/. Traffic Monitoring Subsystem Master /
Client with DFS function Support Unit Attenuator Attenuator Attenuator C/S C/S Report No.: RF140606E01-3 16 of 29 Report Format Version 5.2.0 5.2 CALIBRATION OF DFS DETECTION THRESHOLD LEVEL:
Control PC The measured channel is 5500 MHz in 20MHz Bandwidth, 5510MHz in 40MHz Bandwidth and 5530MHz in 80MHz Bandwidth. The radar signal was the same as transmitted channels, and injected into the antenna port of AP (master) or Client Device with Radar Detection, measured the channel closing transmission time and channel move time. The Master antenna gain is 3.428dBi and required detection threshold is -59.572dBm (= -64 +1 +3.428). The calibrated conducted detection threshold level is set to -59.572 dBm. CONDUCTED SETUP CONFIGURATION OF CALIBRATION OF DFS DETECTION THRESHOLD LEVEL 50 Load (Terminator) Radar Signal Generating Spectrum Analyzer
(Terminator) Attenuator Attenuator Attenuator 50 Load System C/S C/S Report No.: RF140606E01-3 17 of 29 Report Format Version 5.2.0 5.3 DEVIATION FROM TEST STANDARD No deviation. 5.4 CONDUCTED TEST SETUP CONFIGURATION System Control PC Spectrum Analyzer Radar Signal Generating 5.4.1 CLIENT WITHOUT RADAR DETECTION MODE The UUT is a U-NII Device operating in Client mode without radar detection. The radar test signals are injected into the Master Device. Notebook Client (UUT) Attenuator Attenuator Attenuator Notebook Master C/S C/S Report No.: RF140606E01-3 18 of 29 Report Format Version 5.2.0 6. TEST RESULTS 6.1 SUMMARY OF TEST RESULTS CLAUSE TEST PARAMETER REMARKS PASS/FAIL 15.407 15.407 15.407 15.407 15.407 15.407 15.407 15.407 DFS Detection Threshold Not Applicable Channel Availability Check Time Not Applicable Channel Move Time Applicable Channel Closing Transmission Time Applicable Non- Occupancy Period Applicable U-NII Detection Bandwidth Not Applicable Non-associated test Non-Co-Channel test Applicable Applicable NA NA Pass Pass Pass NA Pass Pass Report No.: RF140606E01-3 19 of 29 Report Format Version 5.2.0 6.2 DETAILED TEST RESULTS 6.2.1 TEST MODE: DEVICE OPERATING IN CLIENT WITHOUT RADAR DETECTION MODE. The radar test signals are injected into the Master Device. This test was investigated for different bandwidth (20MHz40MHz and 80MHz). The following plots was done on 80MHz as a representative 6.2.1.1 DFS DETECTION THRESHOLD The required detection threshold is -59.572dBm ( = -64 +3.428+1). The conducted radar burst level is set to -59.572dBm. Radar signal Noise Floor Radar Signal 0 Report No.: RF140606E01-3 20 of 29 Report Format Version 5.2.0 6.2.1.2 CHANNEL CLOSING TRANSMISSION AND CHANNEL MOVE TIME Radar Signal Traffic Signal Noise Floor NOTE: T1 denotes the start of Channel Move Time upon the end of the last Radar burst. T2 denotes the data transmission time of 200ms from T1. T4 denotes the 10 second from T1 to observe the aggregate duration of transmissions. Noise Floor Radar Signal NOTE: An expanded plot for the device vacates the channel in the required 500ms. Report No.: RF140606E01-3 21 of 29 Report Format Version 5.2.0 6.2.1.3 NON- OCCUPANCY PERIOD ASSOCIATED TEST 1) Test results demonstrating an associated client link is established with the master on a test frequency. EUT (Client ) links with master on 5530MHz 2) The client and DFS-certified master device are associated, and the movie can be streamed as specified in the DFS Order for a non-occupancy period test. Client plays a specified files via master. Report No.: RF140606E01-3 22 of 29 Report Format Version 5.2.0 3). The device transmits one type of radar as specified in the DFS Order. Radar 0 is used to test during DFS testing. 4) The test frequency has been monitored to ensure no transmission of any type has occurred for 30 minutes;
Note: If the client moves with the master, the device is considered compliant if nothing appears in the client non-occupancy period test. For devices that shut down (rather than moving channels), no beacons should appear;
5) An analyzer plot that contains a single 30-minute sweep on the original test frequency. Injected into Radar Traffic Signal Noise Floor Report No.: RF140606E01-3 23 of 29 Report Format Version 5.2.0 6.2.1.4 NON-ASSOCIATED TEST Master was off. During the 30 minutes observation time, The UUT did not make any transmissions in the DFS band after UUT power up. Noise Floor 6.2.1.5 NON- CO-CHANNEL TEST The UUT was investigated after radar was detected the channel and made sure no co-channel operation with radars. Report No.: RF140606E01-3 24 of 29 Report Format Version 5.2.0 7. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following:
Linko EMC/RF Lab:
Tel: 886-2-26052180 Fax: 886-2-26052943 Hwa Ya EMC/RF/Safety/Telecom Lab:
Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com Hsin Chu EMC/RF Lab:
Tel: 886-3-5935343 Fax: 886-3-5935342 The address and road map of all our labs can be found in our web site also. Report No.: RF140606E01-3 25 of 29 Report Format Version 5.2.0 8. APPENDIX-A Notch band in 5600-5650MHz Verify that the 5600 5650 MHz band is notched. Test results demonstrating last channel shall not exceed the band edge on 5600~5650MHz. 802.11ac (VHT20) MODULATION
(CH 116: 5580MHz) 802.11ac (VHT20) MODULATION
(CH 132: 5660MHz) 802.11ac (VHT40) MODULATION
(CH 110: 5550MHz) 802.11ac (VHT40) OFDM MODULATION
(CH 134: 5670MHz) 802.11ac (VHT80) MODULATION
(CH 106: 5530MHz) Report No.: RF140606E01-3 26 of 29 Report Format Version 5.2.0 NON BEACON ON DFS BAND 1) Test results demonstrating no any beacon on DFS band after power up. 2) Observation time is 10min after power up. EUT (Client ) links with master on 11ac
(VHT20) mode EUT (Client ) links with master on 11ac
(VHT40) mode EUT (Client ) links with master on 11ac
(VHT80) mode Report No.: RF140606E01-3 27 of 29 Report Format Version 5.2.0 BAND EDGE AT NEARBY DFS BAND 1) Test results demonstrating last channel (20dB BW) shall not exceed the band edge on 5150~5250MHz. EUT (Client ) links with master on 11ac
(VHT20) mode EUT (Client ) links with master on 11ac
(VHT40) mode EUT (Client ) links with master on 11ac
(VHT80) mode Report No.: RF140606E01-3 28 of 29 Report Format Version 5.2.0 9. APPENDIX B - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No modifications were made to the EUT by the lab during the test.
--- END ---
Report No.: RF140606E01-3 29 of 29 Report Format Version 5.2.0
1 2 3 | Test Report (DSS) | Test Report | 1.50 MiB | July 15 2014 |
FCC TEST REPORT
(BLUETOOTH/DTS) REPORT NO.: RF140606E01-2 MODEL NO.: T77H526 FCC ID: MCLT77H526 RECEIVED: June 06, 2014 TESTED: June 18 to July 02, 2014 ISSUED: July 09, 2014 APPLICANT: Hon Hai PRECISION IND.CO.,LTD ADDRESS: 5F-1, Hsin-An Road, Hsinchu, Science Industrial Park, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. Ltd., Taoyuan Branch Hsin Chu Laboratory TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, Taiwan, R.O.C. TEST LOCATION (2): No.49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF140606E01-2 1 of 84 Report Format Version 5.2.0 TABLE OF CONTENTS RELEASE CONTROL RECORD .............................................................................................................. 5 CERTIFICATION ...................................................................................................................... 6 1 SUMMARY OF TEST RESULTS ............................................................................................. 7 2 MEASUREMENT UNCERTAINTY ........................................................................................... 9 2.1 3 GENERAL INFORMATION .................................................................................................... 10 GENERAL DESCRIPTION OF EUT (BLUETOOTH/DTS) ..................................................... 10 3.1 DESCRIPTION OF TEST MODES ........................................................................................ 12 3.2 3.3 TEST MODE APPLICABLITY AND TESTED CHANNEL DETAIL: ........................................ 13 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................................... 17 3.4 DUTY CYCLE OF TEST SIGNAL .......................................................................................... 18 3.5 DESCRIPTION OF SUPPORT UNITS .................................................................................. 19 3.6 3.7 CONFIGURATION OF SYSTEM UNDER TEST ................................................................... 20 TEST PROCEDURES AND RESULTS (BLUETOOTH) ........................................................ 21 4 CONDUCTED EMISSION MEASUREMENT ........................................................................ 21 4.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ...................................................... 21 4.1.1 4.1.2 TEST INSTRUMENTS ........................................................................................................... 21 TEST PROCEDURES ............................................................................................................ 22 4.1.3 DEVIATION FROM TEST STANDARD .................................................................................. 22 4.1.4 4.1.5 TEST SETUP ......................................................................................................................... 22 EUT OPERATING CONDITIONS........................................................................................... 23 4.1.6 TEST RESULTS ..................................................................................................................... 24 4.1.7 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................................ 26 4.2 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ............................. 26 TEST INSTRUMENTS ........................................................................................................... 27 4.2.2 TEST PROCEDURES ............................................................................................................ 29 4.2.3 4.2.4 DEVIATION FROM TEST STANDARD .................................................................................. 29 TEST SETUP ......................................................................................................................... 30 4.2.5 EUT OPERATING CONDITIONS........................................................................................... 30 4.2.6 TEST RESULTS ..................................................................................................................... 31 4.2.7 4.3 NUMBER OF HOPPING FREQUENCY USED ..................................................................... 38 LIMIT OF HOPPING FREQUENCY USED ............................................................................ 38 4.3.1 TEST INSTRUMENTS ........................................................................................................... 38 4.3.2 4.3.3 TEST PROCEDURES ............................................................................................................ 38 DEVIATION FROM TEST STANDARD .................................................................................. 38 4.3.4 TEST SETUP ......................................................................................................................... 39 4.3.5 TEST RESULTS ..................................................................................................................... 39 4.3.6 4.4 DWELL TIME ON EACH CHANNEL ...................................................................................... 40 LIMIT OF DWELL TIME USED .............................................................................................. 40 4.4.1 TEST INSTRUMENTS ........................................................................................................... 40 4.4.2 TEST PROCEDURES ............................................................................................................ 40 4.4.3 4.4.4 DEVIATION FROM TEST STANDARD .................................................................................. 41 TEST SETUP ......................................................................................................................... 41 4.4.5 4.4.6 TEST RESULTS ..................................................................................................................... 42 Report No.: RF140606E01-2 2 of 84 Report Format Version 5.2.0 4.5 4.5.1 4.5.2 4.5.3 4.5.4 4.5.5 4.5.6 4.5.7 4.6 4.6.1 4.6.2 4.6.3 4.6.4 4.6.5 4.6.6 4.7 4.7.1 4.7.2 4.7.3 4.7.4 4.7.5 4.7.6 4.7.7 4.8 4.8.1 4.8.2 4.8.3 4.8.4 4.8.5 4.8.6 4.8.7 5 5.1 5.1.1 5.1.2 5.1.3 5.1.4 5.1.5 5.1.6 5.1.7 5.2 5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 CHANNEL BANDWIDTH ....................................................................................................... 46 LIMITS OF CHANNEL BANDWIDTH ..................................................................................... 46 TEST INSTRUMENTS ........................................................................................................... 46 TEST PROCEDURE .............................................................................................................. 46 DEVIATION FROM TEST STANDARD .................................................................................. 46 TEST SETUP ......................................................................................................................... 47 EUT OPERATING CONDITION ............................................................................................. 47 TEST RESULTS ..................................................................................................................... 48 HOPPING CHANNEL SEPARATION ..................................................................................... 49 LIMIT OF HOPPING CHANNEL SEPARATION ..................................................................... 49 TEST INSTRUMENTS ........................................................................................................... 49 TEST PROCEDURES ............................................................................................................ 49 DEVIATION FROM TEST STANDARD .................................................................................. 49 TEST SETUP ......................................................................................................................... 49 TEST RESULTS ..................................................................................................................... 50 MAXIMUM PEAK OUTPUT POWER ..................................................................................... 51 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT ..................................... 51 INSTRUMENTS ..................................................................................................................... 51 TEST PROCEDURES ............................................................................................................ 51 DEVIATION FROM TEST STANDARD .................................................................................. 51 TEST SETUP ......................................................................................................................... 52 EUT OPERATING CONDITION ............................................................................................. 52 TEST RESULTS ..................................................................................................................... 53 CONDUCTED OUT-BAND EMISSION MEASUREMENT ..................................................... 54 LIMITS OF CONDUCTED OUT-BAND EMISSION MEASUREMENT .................................. 54 TEST INSTRUMENTS ........................................................................................................... 54 TEST PROCEDURE .............................................................................................................. 54 DEVIATION FROM TEST STANDARD .................................................................................. 54 TEST SETUP ......................................................................................................................... 54 EUT OPERATING CONDITION ............................................................................................. 54 TEST RESULTS ..................................................................................................................... 55 TEST TYPES AND RESULTS (DTS) ..................................................................................... 58 CONDUCTED EMISSION MEASUREMENT ........................................................................ 58 LIMITS OF CONDUCTED EMISSION MEASUREMENT ...................................................... 58 TEST INSTRUMENTS ........................................................................................................... 58 TEST PROCEDURES ............................................................................................................ 59 DEVIATION FROM TEST STANDARD .................................................................................. 59 TEST SETUP ......................................................................................................................... 59 EUT OPERATING CONDITIONS........................................................................................... 60 TEST RESULTS ..................................................................................................................... 61 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................................ 63 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ............................. 63 TEST INSTRUMENTS ........................................................................................................... 64 TEST PROCEDURES ............................................................................................................ 66 DEVIATION FROM TEST STANDARD .................................................................................. 67 TEST SETUP ......................................................................................................................... 67 EUT OPERATING CONDITIONS........................................................................................... 67 TEST RESULTS ..................................................................................................................... 68 Report No.: RF140606E01-2 3 of 84 Report Format Version 5.2.0 5.3 5.3.1 5.3.2 5.3.3 5.3.4 5.3.5 5.3.6 5.3.7 5.4 5.4.1 5.4.2 5.4.3 5.4.4 5.4.5 5.4.6 5.4.7 5.5 5.5.1 5.5.2 5.5.3 5.5.4 5.5.5 5.5.6 5.5.7 5.6 5.6.1 5.6.2 5.6.3 5.6.4 5.6.5 5.6.6 5.6.7 6 7 8 6DB BANDWIDTH MEASUREMENT .................................................................................... 72 LIMITS OF 6DB BANDWIDTH MEASUREMENT .................................................................. 72 TEST INSTRUMENTS ........................................................................................................... 72 TEST PROCEDURE .............................................................................................................. 72 DEVIATION FROM TEST STANDARD .................................................................................. 72 TEST SETUP ......................................................................................................................... 72 EUT OPERATING CONDITIONS........................................................................................... 72 TEST RESULTS ..................................................................................................................... 73 CONDUCTED OUTPUT POWER MEASUREMENT ............................................................. 74 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT .......................................... 74 TEST INSTRUMENTS ........................................................................................................... 74 TEST PROCEDURES ............................................................................................................ 74 DEVIATION FROM TEST STANDARD .................................................................................. 75 TEST SETUP ......................................................................................................................... 75 EUT OPERATING CONDITIONS........................................................................................... 75 TEST RESULTS ..................................................................................................................... 76 POWER SPECTRAL DENSITY MEASUREMENT ................................................................ 77 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT ............................................. 77 TEST INSTRUMENTS ........................................................................................................... 77 TEST PROCEDURE .............................................................................................................. 77 DEVIATION FROM TEST STANDARD .................................................................................. 77 TEST SETUP ......................................................................................................................... 77 EUT OPERATING CONDITION ............................................................................................. 77 TEST RESULTS ..................................................................................................................... 78 CONDUCTED OUT-BAND EMISSION MEASUREMENT ..................................................... 79 LIMITS OF CONDUCTED OUT-BAND EMISSION MEASUREMENT .................................. 79 TEST INSTRUMENTS ........................................................................................................... 79 TEST PROCEDURE .............................................................................................................. 79 DEVIATION FROM TEST STANDARD .................................................................................. 80 TEST SETUP ......................................................................................................................... 80 EUT OPERATING CONDITION ............................................................................................. 80 TEST RESULTS ..................................................................................................................... 80 PHOTOGRAPHS OF THE TEST CONFIGURATION ............................................................ 82 INFORMATION ON THE TESTING LABORATORIES .......................................................... 83 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB................................................................................................................... 84 Report No.: RF140606E01-2 4 of 84 Report Format Version 5.2.0 RELEASE CONTROL RECORD ISSUE NO. RF140606E01-2 Original release REASON FOR CHANGE DATE ISSUED July 09, 2014 Report No.: RF140606E01-2 5 of 84 Report Format Version 5.2.0 2 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications:
For BT-EDR mode:
APPLIED STANDARD: FCC Part 15, Subpart C STANDARD SECTION TEST TYPE AND LIMIT RESULT REMARK 15.207 AC Power Conducted Emission PASS Meet the requirement of limit. Minimum passing margin is
-22.68dB at 0.36875MHz. 15.247(a)(1) (iii) Number of Hopping Frequency Used PASS Meet the requirement of limit. 15.247(a)(1) (iii) Dwell Time on Each Channel PASS Meet the requirement of limit. 15.247(a)(1) 15.247(b) 1. Hopping Channel Separation 2. Spectrum Bandwidth of a Frequency Hopping Sequence Spread Spectrum System Maximum Peak Output Power 15.247(d) Transmitter Radiated Emissions 15.247(d) Band Edge Measurement 15.203 Antenna Requirement PASS Meet the requirement of limit. PASS PASS Meet the requirement of limit. Meet the requirement of limit. Minimum passing margin is
-3.0dB at 132.678MHz &
166.522MHz & 266.49MHz. PASS Meet the requirement of limit. PASS Antenna connector is I-PEX not a standard connector. Report No.: RF140606E01-2 7 of 84 Report Format Version 5.2.0 For BT-LE mode:
APPLIED STANDARD: FCC PART 15, SUBPART C (SECTION 15.247) STANDARD SECTION TEST TYPE AND LIMIT 15.207 AC Power Conducted Emission 15.247(d) 15.209 Radiated Emissions & Band Edge Measurement RESUL T PASS PASS REMARK Meet the requirement of limit. Minimum passing margin is
-20.60dB at 0.36484MHz Meet the requirement of limit. Minimum passing margin is -3.0dB at 166.55MHz 15.247(a)(2) 6dB bandwidth PASS Meet the requirement of limit. 15.247(b) Conducted Output power PASS Meet the requirement of limit. 15.247(e) Power Spectral Density PASS Meet the requirement of limit. 15.203 Antenna Requirement PASS Antenna connector is I-PEX not a standard connector. NOTE: Frequency Hopping System operating in 2400-2483.5MHz band and the output power less than 125mW. The hopping channel carrier frequencies separated by a minimum of 25kHz or two-thirds of the 20dB bandwidth of hopping channel whichever is greater. Report No.: RF140606E01-2 8 of 84 Report Format Version 5.2.0 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2:
This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Conducted emissions Radiated emissions (30MHz-1GHz) Radiated emissions (1GHz -6GHz) Radiated emissions (6GHz -18GHz) Radiated emissions (18GHz -40GHz) Value 2.86 dB 5.43 dB 3.65 dB 3.88 dB 4.11 dB Report No.: RF140606E01-2 9 of 84 Report Format Version 5.2.0 3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT (BLUETOOTH/DTS) PRODUCT MODEL NO. POWER SUPPLY MODULATION TYPE MODULATION TECHNOLOGY DATE RATE 802.11ac+802.11abgn + BT4.0+BT3.0+BT2.1/EDR Module T77H526 5Vdc (from host equipment) GFSK, /4-DQPSK, 8DPSK for FHSS GFSK for DTS FHSS, DTS Up to 3Mbps for BT-EDR mode Up to 1Mbps for BT-LE mode BT-EDR, BT-LE mode: 2402MHz ~ 2480MHz FREQUENCY RANGE NUMBER OF CHANNEL BT-EDR mode: 79BT-LE mode: 40 MAX. OUTPUT POWER BT-EDR mode: 5.000 mW BT-LE mode: 5.236 mW Please see NOTE NA Refer to users manual ANTENNA TYPE DATA CABLE I/O PORTS ASSOCIATED DEVICES NA Report No.: RF140606E01-2 10 of 84 Report Format Version 5.2.0 NOTE:
1. There are Bluetooth 4.0 and WLAN technology used for the EUT. 2. WLAN and Bluetooth technology can transmit at same time. 3. Radiated emissions of the simultaneous operation (WLAN & Bluetooth) has been evaluated and no non-compliance was found. 4. The antennas provided to the EUT, please refer to the following table:
Antenna Transmitter No. Circuit Brand Model 1 Chain (0) Wistron Neweb Corporation DC33001KT00
(Main port) 2 Chain (1) Wistron Neweb Corporation DC33001KT10
(Aux port) Antenna Gain(dBi)
<include cable loss>
Cable Loss
(dB) 1.54 1.26 0.57 1.23 0.63 0.16 0.35 1.84 1.38 1.98 2.04 2.08 2.13 3.11 3.21 3.27 Frequency range
(MHz to MHz) 2400~2500 5150~5350 5470~5725 5725~5850 2400~2500 5150~5350 5470~5725 5725~5850 Antenna Connecter Type Type Cable Length
(mm) PIFA I-PEX 363 PIFA I-PEX 593 From the above antennas, Chain (0) Ant. 1 was selected as representative antenna and its data was recorded in this report. 5. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF140606E01-2 11 of 84 Report Format Version 5.2.0 3.2 DESCRIPTION OF TEST MODES 79 channels are provided for BT-EDR mode
(MHz) Channel Freq. Channel Freq.
(MHz) Channel 2422 2402 2423 2403 2404 2424 2425 2405 2426 2406 2427 2407 2408 2428 2429 2409 2430 2410 2411 2431 2432 2412 2433 2413 2434 2414 2415 2435 2436 2416 2437 2417 2418 2438 2439 2419 2440 2420 2421 2441 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 40 channels are provided for BT-LE mode:
CHANNEL FREQ.
(MHZ) CHANNEL FREQ.
(MHZ) CHANNEL 2422 2402 2424 2404 2406 2426 2428 2408 2430 2410 2412 2432 2434 2414 2436 2416 2418 2438 2440 2420 20 21 22 23 24 25 26 27 28 29 10 11 12 13 14 15 16 17 18 19 0 1 2 3 4 5 6 7 8 9
(MHz) Channel Freq. Freq.
(MHz) 2462 2442 2463 2443 2444 2464 2465 2445 2466 2446 2467 2447 2448 2468 2469 2449 2470 2450 2451 2471 2472 2452 2473 2453 2474 2454 2455 2475 2476 2456 2477 2457 2458 2478 2479 2459 2460 2480 2461 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 FREQ.
(MHZ) CHANNEL FREQ.
(MHZ) 2462 2442 2464 2444 2446 2466 2468 2448 2470 2450 2452 2472 2474 2454 2476 2456 2458 2478 2480 2460 30 31 32 33 34 35 36 37 38 39 Report No.: RF140606E01-2 12 of 84 Report Format Version 5.2.0 3.3 TEST MODE APPLICABLITY AND TESTED CHANNEL DETAIL:
For BT-EDR mode:
EUT CONFIGURE MODE APPLICABLE TO PLC RE < 1G RE 1G APCM
-
OB DESCRIPTION
-
Where PLC: Power Line Conducted Emission RE 1G: Radiated Emission above 1GHz OB: Conducted Out-Band Emission Measurement RE < 1G: Radiated Emission below 1GHz APCM: Antenna Port Conducted Measurement NOTE:
NOTE: 1. The EUTs antenna (PIFA) had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Y-plane. POWER LINE CONDUCTED EMISSION:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. Packet Type Modulation Tested Channel Modulation Technology 0 FHSS DH5 Available Channel 0 to 78 Type GFSK RADIATED EMISSION TEST (BELOW 1 GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. Packet Type Modulation Tested Channel Modulation Technology 0 FHSS DH5 Available Channel 0 to 78 Type GFSK RADIATED EMISSION TEST (ABOVE 1 GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. Available Channel 0 to 78 0 to 78 Tested Channel 0, 39, 78 0, 39, 78 Modulation Technology FHSS FHSS Modulation Type GFSK 8DPSK Packet Type DH5 3DH5 Report No.: RF140606E01-2 13 of 84 Report Format Version 5.2.0 ANTENNA PORT CONDUCTED MEASUREMENT:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. Available Channel 0 to 78 0 to 78 Tested Channel 0, 39, 78 0, 39, 78 Modulation Technology FHSS FHSS Modulation Type GFSK 8DPSK Packet Type DH5 3DH5 CONDUCTED OUT-BAND EMISSION MEASUREMENT:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. Available Channel 0 to 78 0 to 78 Tested Channel Modulation Technology 0, 78 0, 78 FHSS FHSS Modulation Type GFSK 8DPSK Packet Type DH5 3DH5 TEST CONDITION:
APPLICABLE TO PLC RE<1G RE1G APCM OB ENVIRONMENTAL CONDITIONS 25deg. C,70%RH 25deg. C, 65%RH 26deg. C, 75%RH 25deg. C, 60%RH 25deg. C, 60%RH INPUT POWER
(SYSTEM) 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz TESTED BY Mike Hsieh Nelson Teng Chilin Lee Nelson Teng Nelson Teng Report No.: RF140606E01-2 14 of 84 Report Format Version 5.2.0 For BT-LE mode:
EUT CONFIGURE MODE APPLICABLE TO PLC RE < 1G RE 1G APCM
-
OB DESCRIPTION
-
Where PLC: Power Line Conducted Emission RE 1G: Radiated Emission above 1GHz OB: Conducted Out-Band Emission Measurement RE < 1G: Radiated Emission below 1GHz APCM: Antenna Port Conducted Measurement NOTE:
NOTE: 1. The EUTs antenna (PIFA) had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Y-plane. POWER LINE CONDUCTED EMISSION TEST:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE BT-LE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY MODULATI ON TYPE DATA RATE
(Mbps) 0 to 39 0 DTS GFSK 1 RADIATED EMISSION TEST (BELOW 1 GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE BT-LE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY 0 to 39 0 DTS MODULATION DATA RATE TYPE GFSK
(Mbps) 1 Report No.: RF140606E01-2 15 of 84 Report Format Version 5.2.0 RADIATED EMISSION TEST (ABOVE 1 GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE BT-LE AVAILABLE CHANNEL 0 to 39 TESTED CHANNEL 0, 19, 39 MODULATION TECHNOLOGY DTS MODULATION DATA RATE TYPE GFSK
(Mbps) 1 ANTENNA PORT CONDUCTED MEASUREMENT:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE BT-LE AVAILABLE CHANNEL 0 to 39 TESTED CHANNEL 0, 19, 39 MODULATION TECHNOLOGY DTS MODULATION DATA RATE TYPE GFSK
(Mbps) 1 CONDUCTED OUT-BAND EMISSION MEASUREMENT:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE BT-LE AVAILABLE CHANNEL 0 to 39 TESTED CHANNEL 0, 19, 39 MODULATION TECHNOLOGY DTS MODULATION DATA RATE TYPE GFSK
(Mbps) 1 TEST CONDITION:
APPLICABLE TO PLC RE<1G RE1G APCM OB ENVIRONMENTAL CONDITIONS 25deg. C,70%RH 25deg. C, 65%RH 26deg. C, 75%RH 25deg. C, 60%RH 25deg. C, 60%RH INPUT POWER
(SYSTEM) 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz TESTED BY Mike Hsieh Nelson Teng Nelson Teng Nelson Teng Nelson Teng Report No.: RF140606E01-2 16 of 84 Report Format Version 5.2.0 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards:
FCC Part 15, Subpart C (15.247) 558074 D01 DTS Meas Guidance v03r01 ANSI C63.10-2009 All test items have been performed and recorded as per the above standards. Note: The EUT has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B
(DoC). The test report has been issued separately.() Note: The EUT is also considered as a kind of computer peripheral, because the connection to computer is necessary for typical use. It has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF140606E01-2 17 of 84 Report Format Version 5.2.0 3.5 DUTY CYCLE OF TEST SIGNAL Duty cycle of test signal is < 98 %, duty factor shall be considered. For BT_LE-GFSK:
Duty cycle = 0.081 ms/0.623 ms = 0.13 BT_LE-GFSK Report No.: RF140606E01-2 18 of 84 Report Format Version 5.2.0 3.6 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. No. A Serial No. HRJB32S FCC ID FCC DoC Provided by Lab Brand DELL Model No. Product Remark DCNE PC B C PCI to SDIO TEST TOOL NB Foxconn NA NA NA Supplied by client DELL PP32LA DSLB32S FCC DoC Provided by Lab NOTE:
1. All power cords of the above support units are non-shielded (1.8 m). No. 1. 2. Cable Qty. Length (m) Shielded
(Yes/ No) Cores
(Number) mini USB to USB UTP RJ-45 1 1 1 10 No No 0 0 Remark Provided by Lab Provided by Lab NOTE:
1. The core(s) is(are) originally attached to the cable(s). Report No.: RF140606E01-2 19 of 84 Report Format Version 5.2.0 PC (A) PCI to SDIO TEST TOOL (B) 3.7 CONFIGURATION OF SYSTEM UNDER TEST NB (B) 2 1 EUT mini-USB in Remote site Report No.: RF140606E01-2 20 of 84 Report Format Version 5.2.0 4 TEST PROCEDURES AND RESULTS (BLUETOOTH) 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) 0.15-0.5 0.5-5 5-30 Quasi-peak CONDUCTED LIMIT (dBV) Average 56 to 46 66 to 56 56 60 46 50 NOTE:
1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 4.1.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER Test Receiver ROHDE & SCHWARZ Line-Impedance Stabilization Network
(for EUT) SCHWARZBECK Line-Impedance Stabilization Network
(for Peripheral) RF Cable
(JYEBAO) 50 ohms Terminator 50 ohms Terminator Software ADT MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL ESCS 30 100375 Apr. 29, 2014 Apr. 28, 2015 NSLK8127 8127-522 Sep. 12, 2013 Sep. 11, 2014 ENV216 100071 Nov. 13, 2013 Nov. 12, 2014 5DFB COCCAB-001 Mar. 10, 2014 Mar. 09, 2015 N/A N/A BV ADT_Cond_V7.3.7. 3 EMC-03 EMC-02 Sep. 24, 2013 Sep. 23, 2014 Oct. 01, 2013 Sep. 30, 2014 NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are Note:
traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. C. 3 The VCCI Con C Registration No. is C-3611. 4 Tested Date: June 27, 2014 Report No.: RF140606E01-2 21 of 84 Report Format Version 5.2.0 4.1.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. b. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. c. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. d. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit 20dB) were not recorded. NOTE: The resolution bandwidth of test receiver is 9kHz for Quasi-peak detection (QP) &
Average detection (AV). 4.1.4 DEVIATION FROM TEST STANDARD No deviation 4.1.5 TEST SETUP For the actual test configuration, please refer to the related item Photographs of the Test Configuration. Report No.: RF140606E01-2 22 of 84 Report Format Version 5.2.0 4.1.6 EUT OPERATING CONDITIONS 1. Connect the EUT with the support unit A (PC) which is placed on a testing table. 2. The communication partner run test program DutApiMimoBtFmBrdigeUart.exe
[WIN-X86-2.1.0.44-14.2.201.p98] to enable EUT under transmission/receiving condition continuously at specific channel frequency. Report No.: RF140606E01-2 23 of 84 Report Format Version 5.2.0 4.1.7 TEST RESULTS PHASE Line (L) DETECTOR FUNCTION Quasi-Peak (QP) /
Average (AV) No 1 2 3 4 5 6 Freq.
[MHz]
0.22031 0.36875 1.89844 2.62500 11.09375 19.79688 Corr. Reading Value Emission Level Factor
(dB) 0.07 0.09 0.17 0.20 0.48 0.71
[dB (uV)]
Q.P. AV. 25.90 19.81 29.31 25.76 27.92 14.56 27.19 19.68 26.06 19.15 24.12 18.63
[dB (uV)]
AV. 19.88 25.85 14.73 19.88 19.63 19.34 Q.P. 25.97 29.40 28.09 27.39 26.54 24.83 Limit
[dB (uV)]
AV. 52.81 48.53 46.00 46.00 50.00 50.00 Q.P. 62.81 58.53 56.00 56.00 60.00 60.00 Margin
(dB) Q.P.
-36.84
-29.13
-27.91
-28.61
-33.46
-35.17 AV.
-32.93
-22.68
-31.27
-26.12
-30.37
-30.66 REMARKS:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF140606E01-2 24 of 84 Report Format Version 5.2.0 PHASE Neutral (N) DETECTOR FUNCTION Quasi-Peak (QP) /
Average (AV) No 1 2 3 4 5 6 Freq.
[MHz]
0.23203 0.36484 1.57031 2.28516 11.42969 18.63281 Corr. Reading Value Emission Level Factor
(dB) 0.07 0.09 0.16 0.19 0.49 0.67
[dB (uV)]
Q.P. AV. 24.92 20.16 27.20 25.08 25.08 14.05 28.00 17.79 24.71 17.70 22.18 16.41
[dB (uV)]
AV. 20.23 25.17 14.21 17.98 18.19 17.08 Q.P. 24.99 27.29 25.24 28.19 25.20 22.85 Limit
[dB (uV)]
AV. 52.38 48.62 46.00 46.00 50.00 50.00 Q.P. 62.38 58.62 56.00 56.00 60.00 60.00 Margin
(dB) Q.P.
-37.38
-31.33
-30.76
-27.81
-34.80
-37.15 AV.
-32.14
-23.45
-31.79
-28.02
-31.81
-32.92 REMARKS:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF140606E01-2 25 of 84 Report Format Version 5.2.0 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power:
FREQUENCIES (MHz) FIELD STRENGTH
(microvolts/meter) MEASUREMENT DISTANCE
(meters) 0.009 ~ 0.490 0.490 ~ 1.705 1.705 ~ 30.0 30 ~ 88 88 ~ 216 216 ~ 960 Above 960 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 300 30 30 3 3 3 3 NOTE:
1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. 4. Section 15.205 restricted bands of operation shall compliance with the limits in Section 15.209. under any condition of modulation. Report No.: RF140606E01-2 26 of 84 Report Format Version 5.2.0 4.2.2 TEST INSTRUMENTS For Below 1GHz test:
DESCRIPTION &
MANUFACTURER MXE EMI Receiver Agilent Pre-Amplifier Mini-Circuits Trilog Broadband Antenna SCHWARZBECK RF Cable Spectrum Analyzer R&S Horn_Antenna AISI Pre-Amplifier Agilent MODEL NO. N9038A ZFL-1000VH2 B VULB 9168 NA FSV40 AIH.8018 8449B RF Cable NA SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL MY50010156 Jan. 15, 2014 Jan. 14, 2015 AMP-ZFL-04 Nov. 13, 2013 Nov. 12, 2014 9168-361 Feb. 27, 2014 Feb. 26, 2015 CHHCAB_001 Oct. 06, 2013 Oct. 05, 2014 100964 July 15, 2013 July 14, 2014 0000220091110 Dec. 06, 2013 Dec. 05, 2014 3008A01923 Oct. 29, 2013 Oct. 28, 2014 RF104-205 RF104-207 RF104-202 Dec. 12, 2013 Dec. 11, 2014 Spectrum Analyzer Agilent Pre-Amplifier SPACEK LABS Horn_Antenna SCHWARZBECK Software Antenna Tower & Turn Table CT Note:
E4446A MY48250253 Aug. 28, 2013 Aug. 27, 2014 SLKKa-48-6 9K16 Nov. 13, 2013 Nov. 12, 2014 BBHA 9170 9170-424 Oct. 08, 2013 Oct. 07, 2014 ADT_Radiated _V8.7.07 NA NA NA NA NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3 The test was performed in 966 Chamber No. H. 4. The FCC Site Registration No. is 797305. 5 The CANADA Site Registration No. is IC 7450H-3. 6 Tested Date: June 18 2014 Report No.: RF140606E01-2 27 of 84 Report Format Version 5.2.0 For Above 1GHz test:
DESCRIPTION &
MANUFACTURER MXE EMI Receiver Agilent Pre-Amplifier Mini-Circuits Trilog Broadband Antenna SCHWARZBECK RF Cable Spectrum Analyzer R&S Horn_Antenna AISI Pre-Amplifier Agilent MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL N9038A MY51210105 Jan. 21,2014 Jan. 20,2015 ZFL-1000VH2 B AMP-ZFL-03 Nov. 13, 2013 Nov. 12, 2014 VULB 9168 9168-360 Feb. 26, 2014 Feb. 25, 2015 NA FSV40 CHGCAB_001 Oct. 05, 2013 Oct. 04, 2014 100964 July 15, 2013 July 14, 2014 AIH.8018 0000320091110 Nov. 18, 2013 Nov. 17, 2014 8449B 3008A01923 Oct. 29, 2013 Oct. 28, 2014 RF Cable NA RF104-201 RF104-203 RF104-204 Dec. 12, 2013 Dec. 11, 2014 Spectrum Analyzer Agilent Pre-Amplifier SPACEK LABS Horn_Antenna SCHWARZBECK Software Antenna Tower & Turn Table CT Note:
E4446A MY48250253 Aug. 28, 2013 Aug. 27, 2014 SLKKa-48-6 9K16 Nov. 13, 2013 Nov. 12, 2014 BBHA 9170 9170-424 Oct. 08, 2013 Oct. 07, 2014 ADT_Radiated _V8.7.07 NA NA NA NA NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3 The test was performed in 966 Chamber No. G. 4. The FCC Site Registration No. is 966073. 5 The VCCI Site Registration No. is G-137. 6 The CANADA Site Registration No. is IC 7450H-2. 7 Tested Date: June 28, 2014 Report No.: RF140606E01-2 28 of 84 Report Format Version 5.2.0 4.2.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meters chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. NOTE:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and video bandwidth is 1MHz for Peak detection at frequency above 1GHz. 3. All modes of operation were investigated and the worst-case emissions are reported. 4. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 10 Hz for Average detection (AV) at frequency above 1GHz. 4.2.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF140606E01-2 29 of 84 Report Format Version 5.2.0 4.2.5 TEST SETUP
<Frequency Range below 1GHz>
EUT&
Support Units 80cm 3m 10m Turn Table Ground Plane Test Receiver Ant. Tower 1-4m Variable
<Frequency Range above 1GHz>
EUT&
Support Units 3m Ant. Tower 1-4m Variable Turn Table Absorber 80cm Ground Plane Test Receiver For the actual test configuration, please refer to the related item Photographs of the Test Configuration. 4.2.6 EUT OPERATING CONDITIONS Same as 4.1.6 Report No.: RF140606E01-2 30 of 84 Report Format Version 5.2.0 4.2.7 TEST RESULTS BELOW 1GHz WORST-CASE DATA BT_GFSK CHANNEL TX Channel 0 FREQUENCY RANGE Below 1GHz DETECTOR FUNCTION Quasi-Peak (QP) NO. 1 2 3 4 5 6 FREQ.
(MHz) 119.90 132.68 166.52 266.13 334.53 399.83 NO. FREQ.
(MHz) 1 2 3 4 5 6 133.42 156.77 166.67 266.49 283.93 332.71 REMARKS:
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT 222 136 131 159 245 360 TABLE ANGLE
(Degree) 43.5 43.5 43.5 46.0 46.0 46.0
-10.1
-3.0
-3.0
-3.2
-6.8
-10.1
(m) 1.56 H 1.99 H 1.49 H 1.00 H 1.00 H 2.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 33.4 QP 48.39 40.5 QP 54.46 40.5 QP 53.82 42.8 QP 56.22 39.2 QP 50.17 35.9 QP 45.63 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 54.32 48.66 53.74 56.43 48.56 47.17 LEVEL
(dBuV/m) 40.4 QP 35.8 QP 40.4 QP 43.0 QP 35.9 QP 36.2 QP
(m) 1.03 V 1.05 V 2.00 V 1.46 V 2.02 V 1.53 V
-3.1
-7.7
-3.1
-3.0
-10.1
-9.8 43.5 43.5 43.5 46.0 46.0 46.0 TABLE ANGLE
(Degree) 303 287 108 360 40 242 ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-15.01
-13.97
-13.33
-13.45
-11.00
-9.69 CORRECTION FACTOR
(dB/m)
-13.88
-12.90
-13.35
-13.45
-12.69
-11.00 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value Report No.: RF140606E01-2 31 of 84 Report Format Version 5.2.0 ABOVE 1GHz DATA BT_GFSK CHANNEL TX Channel 0 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2402.00
*2402.00 4804.00 4804.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2402.00
*2402.00 4804.00 4804.00 REMARKS:
(dB) MARGIN 74.0 54.0 74.0 54.0
-16.6
-26.7 LIMIT
(dBuV/m) ANTENNA HEIGHT 135 135 135 135 122 122 TABLE ANGLE
(Degree)
(m) 1.05 H 1.05 H 1.05 H 1.05 H 1.48 H 1.48 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 57.4 PK 59.87 27.3 AV 29.77 94.3 PK 96.71 64.2 AV 66.61 50.5 PK 44.88 20.4 AV 14.78 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 59.77 29.67 104.41 74.31 45.58 15.48 LEVEL
(dBuV/m) 57.3 PK 27.2 AV 102.0 PK 71.9 AV 51.2 PK 21.1 AV
(m) 1.07 V 1.07 V 1.07 V 1.07 V 1.13 V 1.13 V TABLE ANGLE
(Degree) 296 296 296 296 100 100 ANTENNA HEIGHT LIMIT
(dBuV/m)
-23.5
-33.6
-22.8
-32.9
-16.7
-26.8 74.0 54.0 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.41
-2.41 5.62 5.62 CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.41
-2.41 5.62 5.62 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. The DH5 packet was the worse case duty cycle for a transmit dwell time on a channel, based upon bluetooth theory the transmitter is on 0.625 * 5 per 296.25 ms per channel. Therefore, the duty cycle correlation factor be equal to: 20log(3.125 / 100)= -30.1 dB 7. Average value = peak reading + 20log(duty cycle). Report No.: RF140606E01-2 32 of 84 Report Format Version 5.2.0 CHANNEL TX Channel 39 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK)
(dB) MARGIN LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-23.5
-33.6
-22.3
-32.4 134 134 108 108 132 132 TABLE ANGLE
(Degree)
(m) 1.11 H 1.11 H 1.44 H 1.44 H 1.15 H 1.15 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION VALUE LEVEL
(dBuV)
(dBuV/m) 96.44 94.2 PK 66.34 64.1 AV 44.56 50.5 PK 14.46 20.4 AV 38.52 51.7 PK 21.6 AV 8.42 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 105.54 75.44 45.56 15.46 36.72 6.62 LEVEL
(dBuV/m) 103.3 PK 73.2 AV 51.5 PK 21.4 AV 49.9 PK 19.8 AV
(m) 1.07 V 1.07 V 1.11 V 1.11 V 1.21 V 1.21 V TABLE ANGLE
(Degree) 262 262 98 98 229 229
-22.5
-32.6
-24.1
-34.2 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.24
-2.24 5.94 5.94 13.18 13.18 CORRECTION FACTOR
(dB/m)
-2.24
-2.24 5.94 5.94 13.18 13.18 NO. FREQ.
(MHz) 1 2 3 4 5 6
*2441.00
*2441.00 4882.00 4882.00 7323.00 7323.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*2441.00
*2441.00 4882.00 4882.00 7323.00 7323.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. The DH5 packet was the worse case duty cycle for a transmit dwell time on a channel, based upon bluetooth theory the transmitter is on 0.625 * 5 per 296.25 ms per channel. Therefore, the duty cycle correlation factor be equal to: 20log(3.125 / 100)= -30.1 dB 7. Average value = peak reading + 20log(duty cycle). Report No.: RF140606E01-2 33 of 84 Report Format Version 5.2.0 CHANNEL TX Channel 78 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-16.5
-26.6
-22.8
-32.9
-22.2
-32.3 137 137 137 137 114 114 123 123
(m) 1.17 H 1.17 H 1.17 H 1.17 H 1.47 H 1.47 H 1.15 H 1.15 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION VALUE LEVEL
(dBuV)
(dBuV/m) 96.46 94.4 PK 66.36 64.3 AV 59.53 57.5 PK 29.43 27.4 AV 44.94 51.2 PK 14.84 21.1 AV 38.67 51.8 PK 8.57 21.7 AV ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 103.76 73.66 60.43 30.33 45.14 15.04 36.37 6.27 LEVEL
(dBuV/m) 101.7 PK 71.6 AV 58.4 PK 28.3 AV 51.4 PK 21.3 AV 49.5 PK 19.4 AV
(m) 1.06 V 1.06 V 1.06 V 1.06 V 1.07 V 1.07 V 1.24 V 1.24 V 261 261 261 261 102 102 240 240
-15.6
-25.7
-22.6
-32.7
-24.5
-34.6 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.06
-2.06
-2.03
-2.03 6.26 6.26 13.13 13.13 CORRECTION FACTOR
(dB/m)
-2.06
-2.06
-2.03
-2.03 6.26 6.26 13.13 13.13 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2480.00
*2480.00 2483.50 2483.50 4960.00 4960.00 7440.00 7440.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2480.00
*2480.00 2483.50 2483.50 4960.00 4960.00 7440.00 7440.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. The DH5 packet was the worse case duty cycle for a transmit dwell time on a channel, based upon bluetooth theory the transmitter is on 0.625 * 5 per 296.25 ms per channel. Therefore, the duty cycle correlation factor be equal to: 20log(3.125 / 100)= -30.1 dB 7. Average value = peak reading + 20log(duty cycle). Report No.: RF140606E01-2 34 of 84 Report Format Version 5.2.0 BT_8DPSK CHANNEL TX Channel 0 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2402.00
*2402.00 4804.00 4804.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2402.00
*2402.00 4804.00 4804.00 REMARKS:
(dB) MARGIN 74.0 54.0 74.0 54.0
-15.3
-25.4 LIMIT
(dBuV/m) ANTENNA HEIGHT 150 150 150 150 125 125 TABLE ANGLE
(Degree)
(m) 1.15 H 1.15 H 1.15 H 1.15 H 1.43 H 1.43 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 58.7 PK 61.17 28.6 AV 31.07 95.7 PK 98.11 65.6 AV 68.01 53.9 PK 48.28 23.8 AV 18.18 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 62.77 32.67 104.01 73.91 47.98 17.88 LEVEL
(dBuV/m) 60.3 PK 30.2 AV 101.6 PK 71.5 AV 53.6 PK 23.5 AV
(m) 1.06 V 1.06 V 1.06 V 1.06 V 1.11 V 1.11 V TABLE ANGLE
(Degree) 296 296 296 296 104 104 ANTENNA HEIGHT LIMIT
(dBuV/m)
-20.1
-30.2
-13.7
-23.8
-20.4
-30.5 74.0 54.0 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.41
-2.41 5.62 5.62 CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.41
-2.41 5.62 5.62 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. The DH5 packet was the worse case duty cycle for a transmit dwell time on a channel, based upon bluetooth theory the transmitter is on 0.625 * 5 per 296.25 ms per channel. Therefore, the duty cycle correlation factor be equal to: 20log(3.125 / 100)= -30.1 dB 7. Average value = peak reading + 20log(duty cycle). Report No.: RF140606E01-2 35 of 84 Report Format Version 5.2.0 CHANNEL TX Channel 39 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK)
(dB) MARGIN LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-20.6
-30.7
-20.3
-30.4 156 156 98 98 113 113 TABLE ANGLE
(Degree)
(m) 1.18 H 1.18 H 1.47 H 1.47 H 1.15 H 1.15 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 96.5 PK 98.74 66.4 AV 68.64 53.4 PK 47.46 23.3 AV 17.36 53.7 PK 40.52 23.6 AV 10.42 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 103.94 73.84 47.86 17.76 38.62 8.52 LEVEL
(dBuV/m) 101.7 PK 71.6 AV 53.8 PK 23.7 AV 51.8 PK 21.7 AV
(m) 1.06 V 1.06 V 1.05 V 1.05 V 1.21 V 1.21 V TABLE ANGLE
(Degree) 286 286 108 108 227 227
-20.2
-30.3
-22.2
-32.3 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.24
-2.24 5.94 5.94 13.18 13.18 CORRECTION FACTOR
(dB/m)
-2.24
-2.24 5.94 5.94 13.18 13.18 NO. FREQ.
(MHz) 1 2 3 4 5 6
*2441.00
*2441.00 4882.00 4882.00 7323.00 7323.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*2441.00
*2441.00 4882.00 4882.00 7323.00 7323.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. The DH5 packet was the worse case duty cycle for a transmit dwell time on a channel, based upon bluetooth theory the transmitter is on 0.625 * 5 per 296.25 ms per channel. Therefore, the duty cycle correlation factor be equal to: 20log(3.125 / 100)= -30.1 dB 7. Average value = peak reading + 20log(duty cycle). Report No.: RF140606E01-2 36 of 84 Report Format Version 5.2.0 CHANNEL TX Channel 78 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-14.8
-24.9
-20.5
-30.6
-20.3
-30.4 144 144 144 144 110 110 114 114
(m) 1.16 H 1.16 H 1.16 H 1.16 H 1.43 H 1.43 H 1.10 H 1.10 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 96.1 PK 98.16 66.0 AV 68.06 59.2 PK 61.23 29.1 AV 31.13 53.5 PK 47.24 23.4 AV 17.14 53.7 PK 40.57 23.6 AV 10.47 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 103.86 73.76 61.63 31.53 47.24 17.14 38.47 8.37 LEVEL
(dBuV/m) 101.8 PK 71.7 AV 59.6 PK 29.5 AV 53.5 PK 23.4 AV 51.6 PK 21.5 AV
(m) 1.05 V 1.05 V 1.05 V 1.05 V 1.06 V 1.06 V 1.17 V 1.17 V 262 262 262 262 112 112 229 229
-14.4
-24.5
-20.5
-30.6
-22.4
-32.5 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.06
-2.06
-2.03
-2.03 6.26 6.26 13.13 13.13 CORRECTION FACTOR
(dB/m)
-2.06
-2.06
-2.03
-2.03 6.26 6.26 13.13 13.13 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2480.00
*2480.00 2483.50 2483.50 4960.00 4960.00 7440.00 7440.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2480.00
*2480.00 2483.50 2483.50 4960.00 4960.00 7440.00 7440.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. The DH5 packet was the worse case duty cycle for a transmit dwell time on a channel, based upon bluetooth theory the transmitter is on 0.625 * 5 per 296.25 ms per channel. Therefore, the duty cycle correlation factor be equal to: 20log(3.125 / 100)= -30.1 dB 7. Average value = peak reading + 20log(duty cycle). Report No.: RF140606E01-2 37 of 84 Report Format Version 5.2.0 4.3 NUMBER OF HOPPING FREQUENCY USED 4.3.1 LIMIT OF HOPPING FREQUENCY USED At least 15 hopping frequencies, and should be equally spaced. 4.3.2 TEST INSTRUMENTS MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSV 40 100964 July 15, 2013 July 14, 2014 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 02, 2014 DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
4.3.3 TEST PROCEDURES a. Check the calibration of the measuring instrument (SA) using either an internal calibrator or a known signal from an external generator. b. Turn on the EUT and connect its antenna terminal to measurement via a low loss cable. Then set it to any one measured frequency within its operating range and make sure the instrument is operated in its linear range. c. Set the SA on MaxHold Mode, and then keep the EUT in hopping mode. Record all the signals from each channel until each one has been recorded. d. Set the SA on View mode and then plot the result on SA screen. e. Repeat above procedures until all frequencies measured were complete. 4.3.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF140606E01-2 38 of 84 Report Format Version 5.2.0 4.3.5 TEST SETUP EUT Attenuator SPECTRUM ANALYZER 4.3.6 TEST RESULTS There are 79 hopping frequencies in the hopping mode. Please refer the test result. On the plots, it shows that the hopping frequencies are equally spaced. GFSK 8DPSK Report No.: RF140606E01-2 39 of 84 Report Format Version 5.2.0 4.4 DWELL TIME ON EACH CHANNEL 4.4.1 LIMIT OF DWELL TIME USED The average time of occupancy on any channel shall not be greater than 0.4 seconds within a period of 0.4 seconds multiplied by the number of hopping channels employed. 4.4.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSV 40 100964 July 15, 2013 July 14, 2014 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 02, 2014 4.4.3 TEST PROCEDURES a. Check the calibration of the measuring instrument (SA) using either an internal calibrator or a known signal from an external generator. b. Turn on the EUT and connect its antenna terminal to measurement via a low loss cable. Then set it to any one measured frequency within its operating range and make sure the instrument is operated in its linear range. c. Adjust the center frequency of SA on any frequency be measured and set SA to zero span mode. And then, set RBW and VBW of spectrum analyzer to proper value. d. Measure the time duration of one transmission on the measured frequency. And then plot the result with time difference of this time duration. e. Repeat above procedures until all different time-slot modes have been completed. Report No.: RF140606E01-2 40 of 84 Report Format Version 5.2.0 4.4.4 DEVIATION FROM TEST STANDARD No deviation 4.4.5 TEST SETUP EUT Attenuator SPECTRUM ANALYZER Report No.: RF140606E01-2 41 of 84 Report Format Version 5.2.0 4.4.6 TEST RESULTS For GFSK:
Mode Number of transmission in a 31.6 (79Hopping*0.4) Length of transmission time (msec) Result
(msec) Limit
(msec) DH1 49 times / 5 sec) *6.32=309.68 times 0.558 172.8 DH3 26 (times / 5 sec) *6.32=164.32 times 1.68 276.06 DH5 17 (times / 5 sec) *6.32=107.44 times 2.96 318.02 NOTE: Test plots of the transmitting time slot are shown on next page. 400 400 400 Report No.: RF140606E01-2 42 of 84 Report Format Version 5.2.0 DH1 DH3 DH5 Report No.: RF140606E01-2 43 of 84 Report Format Version 5.2.0 For 8DPSK:
Mode Number of transmission in a 31.6 (79Hopping*0.4) Length of transmission time (msec) Result
(msec) Limit
(msec) 3DH1 49 (times / 5 sec) *6.32=322.32 times 0.456 146.98 3DH3 25 (times / 5 sec) *6.32=170.64 times 1.75 298.62 3DH5 17 (times / 5 sec) *6.32=101.12 times 2.976 300.93 NOTE: Test plots of the transmitting time slot are shown on next page. 400 400 400 Report No.: RF140606E01-2 44 of 84 Report Format Version 5.2.0 DH1 DH3 DH5 Report No.: RF140606E01-2 45 of 84 Report Format Version 5.2.0 4.5 CHANNEL BANDWIDTH 4.5.1 LIMITS OF CHANNEL BANDWIDTH For frequency hopping system operating in the 2400-2483.5MHz, If the 20dB bandwidth of hopping channel is greater than 25kHz, two-thirds 20dBbandwidth of hopping channel shell be a minimum limit for the hopping channel separation. 4.5.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSV 40 100964 July 15, 2013 July 14, 2014 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 02, 2014 4.5.3 TEST PROCEDURE a. Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. b. Turn on the EUT and connect it to measurement instrument. Then set it to any one convenient frequency within its operating range. Set a reference level on the measuring instrument equal to the highest peak value. c. Measure the frequency difference of two frequencies that were attenuated 20dB from the reference level. Record the frequency difference as the emission bandwidth. d. Repeat above procedures until all frequencies measured were complete. 4.5.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF140606E01-2 46 of 84 Report Format Version 5.2.0 4.5.5 TEST SETUP EUT Attenuator SPECTRUM ANALYZER 4.5.6 EUT OPERATING CONDITION The software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel frequencies individually. Report No.: RF140606E01-2 47 of 84 Report Format Version 5.2.0 4.5.7 TEST RESULTS CHANNEL FREQUENCY
(MHz) 0 39 78 2402 2441 2480 20dB BANDWIDTH (MHz) GFSK 0.95 0.96 0.95 8DPSK 1.31 1.30 1.30 SPECTRUM PLOT OF WORST VALUE GFSK / CH39 8DPSK / CH0 Report No.: RF140606E01-2 48 of 84 Report Format Version 5.2.0 4.6 HOPPING CHANNEL SEPARATION 4.6.1 LIMIT OF HOPPING CHANNEL SEPARATION At least 25 kHz or two-thirds of 20dB hopping channel bandwidth (whichever is greater). 4.6.2 TEST INSTRUMENTS MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSV 40 100964 July 15, 2013 July 14, 2014 DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 02, 2014 4.6.3 TEST PROCEDURES a. Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. b. Turn on the EUT and connect it to measurement instrument. Then set it to any one convenient frequency within its operating range. c. By using the MaxHold function record the separation of two adjacent channels. d. Measure the frequency difference of these two adjacent channels by SA MARK function. And then plot the result on SA screen. e. Repeat above procedures until all frequencies measured were complete. 4.6.4 DEVIATION FROM TEST STANDARD No deviation 4.6.5 TEST SETUP EUT Attenuator SPECTRUM ANALYZER Report No.: RF140606E01-2 49 of 84 Report Format Version 5.2.0 4.6.6 TEST RESULTS CHANNEL FREQUENCY
(MHz) ADJACENT CHANNEL SEPARATION
(MHz) 20dB BANDWIDTH
(MHz) MINIMUM LIMIT
(MHz) 8DPSK GFSK 0.95 1.00 0.96 1.00 1.00 0.95 NOTE: The minimum limit is two-third 20dB bandwidth. GFSK 1.00 1.00 1.01 2402 2441 2480 0 39 78 8DPSK GFSK 0.64 1.31 0.64 1.30 1.30 0.64 8DPSK 0.88 0.87 0.87 SPECTRUM PLOT OF WORST VALUE GFSK / CH39 8DPSK / CH78 PASS /
FAIL PASS PASS PASS Report No.: RF140606E01-2 50 of 84 Report Format Version 5.2.0 4.7 MAXIMUM PEAK OUTPUT POWER 4.7.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT The Maximum Peak Output Power Limit is 125mW. 4.7.2 INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSV 40 100964 July 15, 2013 July 14, 2014 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 02, 2014 4.7.3 TEST PROCEDURES a. Check the calibration of the measuring instrument using either an internal calibrator or a known signal from an external generator. b. Turn on the EUT and connect it to measurement instrument. Then set it to any one convenient frequency within its operating range. Set a reference level on the measuring instrument equal to the highest peak value. c. The center frequency of the spectrum analyzer is set to the fundamental frequency and using 3MHz RBW and 10 MHz VBW. d. Measure the captured power within the band and recording the plot. e. Repeat above procedures until all frequencies required were complete. 4.7.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF140606E01-2 51 of 84 Report Format Version 5.2.0 4.7.5 TEST SETUP EUT Attenuator SPECTRUM ANALYZER For the actual test configuration, please refer to the related Item Photographs of the Test Configuration. 4.7.6 EUT OPERATING CONDITION The software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel frequencies individually. Report No.: RF140606E01-2 52 of 84 Report Format Version 5.2.0 4.7.7 TEST RESULTS CHANNEL FREQUENCY
(MHz) 0 39 78 2402 2441 2480 OUTPUT POWER
(mW) OUTPUT POWER
(dBm) GFSK 2.460 2.291 2.213 8DPSK 5.000 4.467 4.083 GFSK 3.91 3.60 3.45 8DPSK 6.99 6.50 6.11 POWER LIMIT (mW) PASS /
FAIL 125 125 125 PASS PASS PASS SPECTRUM PLOT OF WORST VALUE GFSK / CH0 8DPSK / CH0 Report No.: RF140606E01-2 53 of 84 Report Format Version 5.2.0 4.8 CONDUCTED OUT-BAND EMISSION MEASUREMENT 4.8.1 LIMITS OF CONDUCTED OUT-BAND EMISSION MEASUREMENT Below 20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.8.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSV 40 100964 July 15, 2013 July 14, 2014 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 02, 2014 4.8.3 TEST PROCEDURE The transmitter output was connected to the spectrum analyzer via a low lose cable. Set RBW a of spectrum analyzer to 100 kHz and VBW of spectrum analyzer to 300 kHz with suitable frequency span including 100 MHz bandwidth from band edge. The band edges was measured and recorded. 4.8.4 DEVIATION FROM TEST STANDARD No deviation 4.8.5 TEST SETUP EUT Attenuator SPECTRUM ANALYZER 4.8.6 EUT OPERATING CONDITION The software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel frequencies individually. Report No.: RF140606E01-2 54 of 84 Report Format Version 5.2.0 4.8.7 TEST RESULTS The spectrum plots are attached on the following images. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement. Report No.: RF140606E01-2 55 of 84 Report Format Version 5.2.0 GFSK Hopping disabled_ Low Channel Hopping disabled_ High Channel Hopping enabled_ Low Channel Hopping enabled_ High Channel Report No.: RF140606E01-2 56 of 84 Report Format Version 5.2.0 8DPSK Hopping disabled_ Low Channel Hopping disabled_ High Channel Hopping enabled_ Low Channel Hopping enabled_ High Channel Report No.: RF140606E01-2 57 of 84 Report Format Version 5.2.0 5 TEST TYPES AND RESULTS (DTS) 5.1 CONDUCTED EMISSION MEASUREMENT 5.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) CONDUCTED LIMIT (dBV) 0.15-0.5 0.5-5 5-30 Quasi-peak 66 to 56 56 60 Average 56 to 46 46 50 NOTE:
1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 5.1.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER Test Receiver ROHDE & SCHWARZ Line-Impedance Stabilization Network
(for EUT) SCHWARZBECK Line-Impedance Stabilization Network
(for Peripheral) RF Cable
(JYEBAO) 50 ohms Terminator 50 ohms Terminator Software ADT MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL ESCS 30 100375 Apr. 29, 2014 Apr. 28, 2015 NSLK8127 8127-522 Sep. 12, 2013 Sep. 11, 2014 ENV216 100071 Nov. 13, 2013 Nov. 12, 2014 5DFB COCCAB-001 Mar. 10, 2014 Mar. 09, 2015 N/A N/A BV ADT_Cond_V7.3.7. 3 EMC-03 EMC-02 Sep. 24, 2013 Sep. 23, 2014 Oct. 01, 2013 Sep. 30, 2014 NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are Note:
traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. C. 3 The VCCI Con C Registration No. is C-3611. 4 Tested Date: June 27, 2014 Report No.: RF140606E01-2 58 of 84 Report Format Version 5.2.0 5.1.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. b. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. c. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. d. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) were not recorded. NOTE:
1. The resolution bandwidth of test receiver is 9kHz for Quasi-peak detection (QP) & Average detection (AV). 5.1.4 DEVIATION FROM TEST STANDARD No deviation 5.1.5 TEST SETUP For the actual test configuration, please refer to the related item Photographs of the Test Configuration. Report No.: RF140606E01-2 59 of 84 Report Format Version 5.2.0 5.1.6 EUT OPERATING CONDITIONS 1. Connect the EUT with the support unit A (PC) which is placed on a testing table. 2. The communication partner run test program DutApiMimoBtFmBrdigeUart.exe
[WIN-X86-2.1.0.44-14.2.201.p98] to enable EUT under transmission/receiving condition continuously at specific channel frequency. Report No.: RF140606E01-2 60 of 84 Report Format Version 5.2.0 5.1.7 TEST RESULTS PHASE Line (L) DETECTOR FUNCTION Quasi-Peak (QP) /
Average (AV) No 1 2 3 4 5 6 Freq.
[MHz]
0.22812 0.36484 1.90234 4.92969 12.00000 20.09766 Corr. Reading Value Emission Level Factor
(dB) 0.07 0.09 0.17 0.29 0.51 0.71
[dB (uV)]
Q.P. AV. 26.92 21.51 29.84 27.93 28.30 15.94 20.34 6.90 27.72 16.98 23.65 18.75
[dB (uV)]
AV. 21.58 28.02 16.11 7.19 17.49 19.46 Q.P. 26.99 29.93 28.47 20.63 28.23 24.36 Limit
[dB (uV)]
AV. 52.52 48.62 46.00 46.00 50.00 50.00 Q.P. 62.52 58.62 56.00 56.00 60.00 60.00 Margin
(dB) Q.P.
-35.53
-28.69
-27.53
-35.37
-31.77
-35.64 AV.
-30.94
-20.60
-29.89
-38.81
-32.51
-30.54 REMARKS:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF140606E01-2 61 of 84 Report Format Version 5.2.0 PHASE Neutral (N) DETECTOR FUNCTION Quasi-Peak (QP) /
Average (AV) No 1 2 3 4 5 6 Freq.
[MHz]
0.22031 0.36094 0.83359 2.43359 10.88672 19.14063 Corr. Reading Value Emission Level Factor
(dB) 0.07 0.09 0.12 0.20 0.47 0.68
[dB (uV)]
Q.P. AV. 24.53 18.49 27.37 22.91 19.74 9.52 25.95 20.04 24.00 18.42 22.09 16.58
[dB (uV)]
AV. 18.56 23.00 9.64 20.24 18.89 17.26 Q.P. 24.60 27.46 19.86 26.15 24.47 22.77 Limit
[dB (uV)]
AV. 52.81 48.71 46.00 46.00 50.00 50.00 Q.P. 62.81 58.71 56.00 56.00 60.00 60.00 Margin
(dB) Q.P.
-38.21
-31.25
-36.14
-29.85
-35.53
-37.23 AV.
-34.25
-25.71
-36.36
-25.76
-31.11
-32.74 REMARKS:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF140606E01-2 62 of 84 Report Format Version 5.2.0 5.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT 5.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power:
Frequencies
(MHz) 0.009-0.490 0.490-1.705 1.705-30.0 30-88 88-216 216-960 Above 960 Field strength
(microvolts/meter) 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 Measurement distance (meters) 300 30 30 3 3 3 3 NOTE:
1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF140606E01-2 63 of 84 Report Format Version 5.2.0 5.2.2 TEST INSTRUMENTS For Below 1GHz test:
DESCRIPTION &
MANUFACTURER MXE EMI Receiver Agilent Pre-Amplifier Mini-Circuits Trilog Broadband Antenna SCHWARZBECK RF Cable Spectrum Analyzer R&S Horn_Antenna AISI Pre-Amplifier Agilent MODEL NO. N9038A ZFL-1000VH2 B VULB 9168 NA FSV40 AIH.8018 8449B RF Cable NA SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL MY50010156 Jan. 15, 2014 Jan. 14, 2015 AMP-ZFL-04 Nov. 13, 2013 Nov. 12, 2014 9168-361 Feb. 27, 2014 Feb. 26, 2015 CHHCAB_001 Oct. 06, 2013 Oct. 05, 2014 100964 July 15, 2013 July 14, 2014 0000220091110 Dec. 06, 2013 Dec. 05, 2014 3008A01923 Oct. 29, 2013 Oct. 28, 2014 RF104-205 RF104-207 RF104-202 Dec. 12, 2013 Dec. 11, 2014 Spectrum Analyzer Agilent Pre-Amplifier SPACEK LABS Horn_Antenna SCHWARZBECK Software Antenna Tower & Turn Table CT Note:
E4446A MY48250253 Aug. 28, 2013 Aug. 27, 2014 SLKKa-48-6 9K16 Nov. 13, 2013 Nov. 12, 2014 BBHA 9170 9170-424 Oct. 08, 2013 Oct. 07, 2014 ADT_Radiated _V8.7.07 NA NA NA NA NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3 The test was performed in 966 Chamber No. H. 4. The FCC Site Registration No. is 797305. 5 The CANADA Site Registration No. is IC 7450H-3. 6 Tested Date: June 18 2014 Report No.: RF140606E01-2 64 of 84 Report Format Version 5.2.0 For Above 1GHz test:
DESCRIPTION &
MANUFACTURER MXE EMI Receiver Agilent Pre-Amplifier Mini-Circuits Trilog Broadband Antenna SCHWARZBECK RF Cable Spectrum Analyzer R&S Horn_Antenna AISI Pre-Amplifier Agilent MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL N9038A MY51210105 Jan. 21,2014 Jan. 20,2015 ZFL-1000VH2 B AMP-ZFL-03 Nov. 13, 2013 Nov. 12, 2014 VULB 9168 9168-360 Feb. 26, 2014 Feb. 25, 2015 NA FSV40 CHGCAB_001 Oct. 05, 2013 Oct. 04, 2014 100964 July 15, 2013 July 14, 2014 AIH.8018 0000320091110 Nov. 18, 2013 Nov. 17, 2014 8449B 3008A01923 Oct. 29, 2013 Oct. 28, 2014 RF Cable NA RF104-201 RF104-203 RF104-204 Dec. 12, 2013 Dec. 11, 2014 Spectrum Analyzer Agilent Pre-Amplifier SPACEK LABS Horn_Antenna SCHWARZBECK Software Antenna Tower & Turn Table CT Note:
E4446A MY48250253 Aug. 28, 2013 Aug. 27, 2014 SLKKa-48-6 9K16 Nov. 13, 2013 Nov. 12, 2014 BBHA 9170 9170-424 Oct. 08, 2013 Oct. 07, 2014 ADT_Radiated _V8.7.07 NA NA NA NA NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3 The test was performed in 966 Chamber No. G. 4. The FCC Site Registration No. is 966073. 5 The VCCI Site Registration No. is G-137. 6 The CANADA Site Registration No. is IC 7450H-2. 7 Tested Date: June 28, 2014 Report No.: RF140606E01-2 65 of 84 Report Format Version 5.2.0 5.2.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 1/T (Duty cycle < 98%) or 10Hz (Duty cycle 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. Report No.: RF140606E01-2 66 of 84 Report Format Version 5.2.0 5.2.4 DEVIATION FROM TEST STANDARD No deviation 5.2.5 TEST SETUP
<Frequency Range below 1GHz>
EUT&
Support Units 80cm 3m 10m Turn Table Ground Plane Test Receiver Ant. Tower 1-4m Variable
<Frequency Range above 1GHz>
EUT&
Support Units 3m Ant. Tower 1-4m Variable Turn Table Absorber 80cm Ground Plane Test Receiver For the actual test configuration, please refer to the related item Photographs of the Test Configuration. 5.2.6 EUT OPERATING CONDITIONS Same as 5.1.6 Report No.: RF140606E01-2 67 of 84 Report Format Version 5.2.0 5.2.7 TEST RESULTS BELOW 1GHz WORST-CASE DATA BT_LE-GFSK CHANNEL TX Channel 0 FREQUENCY RANGE Below 1GHz DETECTOR FUNCTION Quasi-Peak (QP) NO. 1 2 3 4 5 6 FREQ.
(MHz) 120.21 133.66 166.47 266.78 334.19 399.66 NO. FREQ.
(MHz) 1 2 3 4 5 6 133.33 156.84 166.55 266.23 283.02 331.51 REMARKS:
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT 212 130 162 137 214 23 TABLE ANGLE
(Degree) 43.5 43.5 43.5 46.0 46.0 46.0
-10.8
-3.2
-3.1
-3.2
-6.1
-11.0
(m) 1.55 H 1.93 H 1.52 H 1.05 H 1.00 H 1.96 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 32.7 QP 47.71 40.3 QP 54.14 40.4 QP 53.71 42.8 QP 56.24 39.9 QP 50.86 35.0 QP 44.71 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 54.25 49.47 53.82 56.27 49.05 48.06 LEVEL
(dBuV/m) 40.4 QP 36.6 QP 40.5 QP 42.8 QP 36.3 QP 37.1 QP
(m) 1.00 V 1.05 V 1.99 V 1.47 V 2.00 V 1.50 V 43.5 43.5 43.5 46.0 46.0 46.0
-3.1
-6.9
-3.0
-3.2
-9.7
-8.9 TABLE ANGLE
(Degree) 304 286 108 360 39 241 ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-14.99
-13.86
-13.33
-13.43
-11.00
-9.70 CORRECTION FACTOR
(dB/m)
-13.89
-12.91
-13.33
-13.45
-12.72
-11.00 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value Report No.: RF140606E01-2 68 of 84 Report Format Version 5.2.0 ABOVE 1GHz DATA BT_LE-GFSK CHANNEL TX Channel 0 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV) NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2402.00
*2402.00 4804.00 4804.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2402.00
*2402.00 4804.00 4804.00 REMARKS:
(dB) MARGIN 74.0 54.0 74.0 54.0
-16.6
-6.5 LIMIT
(dBuV/m) ANTENNA HEIGHT 136 136 136 136 291 291 TABLE ANGLE
(Degree)
(m) 1.04 H 1.04 H 1.04 H 1.04 H 1.54 H 1.54 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 57.4 PK 59.87 47.5 AV 49.97 95.6 PK 98.01 94.0 AV 96.41 50.3 PK 44.68 42.0 AV 36.38 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 60.37 49.87 104.11 103.41 44.78 36.28 LEVEL
(dBuV/m) 57.9 PK 47.4 AV 101.7 PK 101.0 AV 50.4 PK 41.9 AV
(m) 1.13 V 1.13 V 1.13 V 1.13 V 1.04 V 1.04 V TABLE ANGLE
(Degree) 316 316 316 316 96 96 ANTENNA HEIGHT LIMIT
(dBuV/m)
-23.7
-12.0
-23.6
-12.1
-16.1
-6.6 74.0 54.0 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.41
-2.41 5.62 5.62 CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.41
-2.41 5.62 5.62 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01-2 69 of 84 Report Format Version 5.2.0 CHANNEL TX Channel 19 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-24.0
-12.5
-22.7
-13.0 126 126 278 278 120 120 TABLE ANGLE
(Degree)
(m) 1.01 H 1.01 H 1.52 H 1.52 H 1.11 H 1.11 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 95.8 PK 98.04 94.3 AV 96.54 50.0 PK 44.06 41.5 AV 35.56 51.3 PK 38.11 41.0 AV 27.81 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 104.54 103.44 45.06 36.36 36.51 28.01 LEVEL
(dBuV/m) 102.3 PK 101.2 AV 51.0 PK 42.3 AV 49.7 PK 41.2 AV
(m) 1.13 V 1.13 V 1.06 V 1.06 V 1.16 V 1.16 V TABLE ANGLE
(Degree) 260 260 100 100 243 243
-23.0
-11.7
-24.3
-12.8 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.24
-2.24 5.94 5.94 13.19 13.19 CORRECTION FACTOR
(dB/m)
-2.24
-2.24 5.94 5.94 13.19 13.19 NO. FREQ.
(MHz) 1 2 3 4 5 6
*2440.00
*2440.00 4880.00 4880.00 7320.00 7320.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*2440.00
*2440.00 4880.00 4880.00 7320.00 7320.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01-2 70 of 84 Report Format Version 5.2.0 CHANNEL TX Channel 39 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-13.3
-5.9
-24.7
-13.0
-22.8
-13.3 360 360 134 134 290 290 104 104
(m) 1.00 H 1.00 H 1.00 H 1.00 H 1.49 H 1.49 H 1.10 H 1.10 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 94.0 PK 96.06 93.7 AV 95.76 60.7 PK 62.73 48.1 AV 50.13 49.3 PK 43.04 41.0 AV 34.74 51.2 PK 38.07 40.7 AV 27.57 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 102.26 101.56 66.23 50.43 44.74 35.74 36.07 27.67 LEVEL
(dBuV/m) 100.2 PK 99.5 AV 64.2 PK 48.4 AV 51.0 PK 42.0 AV 49.2 PK 40.8 AV
(m) 1.12 V 1.12 V 1.12 V 1.12 V 1.02 V 1.02 V 1.21 V 1.21 V 200 200 200 200 103 103 259 259
-9.8
-5.6
-23.0
-12.0
-24.8
-13.2 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.06
-2.06
-2.03
-2.03 6.26 6.26 13.13 13.13 CORRECTION FACTOR
(dB/m)
-2.06
-2.06
-2.03
-2.03 6.26 6.26 13.13 13.13 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2480.00
*2480.00 2483.50 2483.50 4960.00 4960.00 7440.00 7440.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2480.00
*2480.00 2483.50 2483.50 4960.00 4960.00 7440.00 7440.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01-2 71 of 84 Report Format Version 5.2.0 6dB BANDWIDTH MEASUREMENT 5.3 5.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 5.3.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSV 40 100964 July 15, 2013 July 14, 2014 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 01, 2014 5.3.3 TEST PROCEDURE 1. Set resolution bandwidth (RBW) = 100kHz. 2. Set the video bandwidth (VBW) 3 x RBW, Detector = Peak. 3. Trace mode = max hold. 4. Sweep = auto couple. 5. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 5.3.4 DEVIATION FROM TEST STANDARD No deviation 5.3.5 TEST SETUP 5.3.6 EUT OPERATING CONDITIONS The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. SPECTRUM ANALYZER Attenuator EUT Report No.: RF140606E01-2 72 of 84 Report Format Version 5.2.0 5.3.7 TEST RESULTS CHANNEL FREQUENCY
(MHz) 0 19 39 2402 2440 2480 BANDWIDTH 6dB
(MHz) 0.52 0.52 0.52 MINIMUM LIMIT
(MHz) PASS / FAIL 0.5 0.5 0.5 PASS PASS PASS SPECTRUM PLOT OF WORST VALUE BT_LE-GFSK / CH0 Report No.: RF140606E01-2 73 of 84 Report Format Version 5.2.0 5.4 CONDUCTED OUTPUT POWER MEASUREMENT 5.4.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT For systems using digital modulation in the 24002483.5 MHz bands: 1 Watt
(30dBm) 5.4.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER Power meter Anritsu Power sensor Anritsu Note:
MODEL NO. SERIAL NO. ML2495A 1014008 CALIBRATED DATE Apr. 30, 2014 CALIBRATED UNTIL Apr. 29, 2015 MA2411B 0917122 Apr. 30, 2014 Apr. 29, 2015 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 01, 2014 5.4.3 TEST PROCEDURES The peak / average power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak / average power sensor. Record the peak power level. Report No.: RF140606E01-2 74 of 84 Report Format Version 5.2.0 5.4.4 DEVIATION FROM TEST STANDARD No deviation. 5.4.5 TEST SETUP EUT Attenuator Power Sensor Power Meter 5.4.6 EUT OPERATING CONDITIONS Same as Item 5.3.6 Report No.: RF140606E01-2 75 of 84 Report Format Version 5.2.0 5.4.7 TEST RESULTS FOR PEAK POWER BT_LE-GFSK CHANNEL FREQUENCY
(MHz) 0 19 39 2402 2440 2480 FOR AVERAGE POWER BT_LE-GFSK PEAK POWER
(mW) PEAK POWER
(dBm) LIMIT (dBm) PASS/FAIL 5.236 5.047 4.831 7.19 7.03 6.84 30 30 30 PASS PASS PASS CHANNEL FREQUENCY (MHz) 0 19 39 2402 2440 2480 AVERAGE POWER
(mW) 2.084 2.061 2.014 AVERAGE POWER
(dBm) 3.19 3.14 3.04 Report No.: RF140606E01-2 76 of 84 Report Format Version 5.2.0 5.5 POWER SPECTRAL DENSITY MEASUREMENT 5.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT The Maximum of Power Spectral Density Measurement is 8dBm. 5.5.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSV 40 100964 July 15, 2013 July 14, 2014 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 01, 2014 5.5.3 TEST PROCEDURE 1. Set the RBW = 3 kHz, VBW =10 kHz, Detector = peak. 2. Sweep time = auto couple, Trace mode = max hold, allow trace to fully stabilize. 3. Use the peak marker function to determine the maximum amplitude level. 5.5.4 DEVIATION FROM TEST STANDARD No deviation 5.5.5 TEST SETUP 5.5.6 EUT OPERATING CONDITION Same as Item 5.3.6 Attenuator EUT SPECTRUM ANALYZER Report No.: RF140606E01-2 77 of 84 Report Format Version 5.2.0 5.5.7 TEST RESULTS BT_LE-GFSK Channel 0 19 39 FREQUENCY
(MHz) 2402 2440 2480 PSD (dBm) LIMIT (dBm)
-13.96
-14.34
-14.66 8 8 8 PASS
/FAIL PASS PASS PASS SPECTRUM PLOT OF WORST VALUE BT_LE-GFSK / CH0 Report No.: RF140606E01-2 78 of 84 Report Format Version 5.2.0 5.6 CONDUCTED OUT-BAND EMISSION MEASUREMENT 5.6.1 LIMITS OF CONDUCTED OUT-BAND EMISSION MEASUREMENT Below 20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 5.6.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSV 40 100964 July 15, 2013 July 14, 2014 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 01, 2014 5.6.3 TEST PROCEDURE Measurement Procedure - Reference Level 1. Set the RBW = 100 kHz. 2. Set the VBW 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. Measurement Procedure Unwanted Emission Level 1. Set RBW = 100 kHz. 2. Set VBW 300 kHz. 3. Set span to encompass the spectrum to be examined 4. Detector = peak. 5. Trace Mode = max hold. 6. Sweep = auto couple. Report No.: RF140606E01-2 79 of 84 Report Format Version 5.2.0 5.6.4 DEVIATION FROM TEST STANDARD No deviation 5.6.5 TEST SETUP EUT Attenuator SPECTRUM ANALYZER 5.6.6 EUT OPERATING CONDITION Same as Item 5.3.6 5.6.7 TEST RESULTS The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement. Report No.: RF140606E01-2 80 of 84 Report Format Version 5.2.0 BT_LE-GFSK CH 0 CH 19 CH 39 CH 0 Band edge CH 39 Band edge Report No.: RF140606E01-2 81 of 84 Report Format Version 5.2.0 6 PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF140606E01-2 82 of 84 Report Format Version 5.2.0 7 INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following:
Linko EMC/RF Lab:
Tel: 886-2-26052180 Fax: 886-2-26052943 Hwa Ya EMC/RF/Safety/Telecom Lab:
Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com Hsin Chu EMC/RF Lab:
Tel: 886-3-5935343 Fax: 886-3-5935342 The address and road map of all our labs can be found in our web site also. Report No.: RF140606E01-2 83 of 84 Report Format Version 5.2.0 8 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No modifications were made to the EUT by the lab during the test.
--- END ---
Report No.: RF140606E01-2 84 of 84 Report Format Version 5.2.0
1 2 3 | Test Report (DTS) | Test Report | 1.72 MiB | July 15 2014 |
FCC TEST REPORT
(WLAN 15.247) REPORT NO.: RF140606E01 MODEL NO.: T77H526 FCC ID: MCLT77H526 RECEIVED: June 06, 2014 TESTED: June 16 to July 01, 2014 ISSUED: July 09, 2014 APPLICANT: Hon Hai PRECISION IND.CO.,LTD ADDRESS: 5F-1, Hsin-An Road, Hsinchu, Science Industrial Park, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services
(H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF140606E01 1 of 64 Report Format Version 5.2.0 Table of Contents RELEASE CONTROL RECORD .......................................................................................... 4 1. CERTIFICATION ....................................................................................................... 5 2. SUMMARY OF TEST RESULTS .............................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ............................................................................ 7 3. GENERAL INFORMATION ....................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT (WLAN) ........................................................... 8 3.2 DESCRIPTION OF TEST MODES ......................................................................... 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ......................... 11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................ 14 DUTY CYCLE OF TEST SIGNAL ........................................................................... 15 3.4 DESCRIPTION OF SUPPORT UNITS ................................................................... 16 3.5 CONFIGURATION OF SYSTEM UNDER TEST .................................................... 17 3.6 4. TEST TYPES AND RESULTS ................................................................................ 18 4.1 CONDUCTED EMISSION MEASUREMENT ......................................................... 18 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ....................................... 18 4.1.2 TEST INSTRUMENTS ............................................................................................ 18 4.1.3 TEST PROCEDURES ............................................................................................ 19 4.1.4 DEVIATION FROM TEST STANDARD................................................................... 19 4.1.5 TEST SETUP .......................................................................................................... 19 4.1.6 EUT OPERATING CONDITIONS ........................................................................... 20 4.1.7 TEST RESULTS ..................................................................................................... 21 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................. 23 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 23 4.2.2 TEST INSTRUMENTS ............................................................................................ 24 4.2.3 TEST PROCEDURES ............................................................................................ 26 4.2.4 DEVIATION FROM TEST STANDARD................................................................... 26 4.2.5 TEST SETUP .......................................................................................................... 27 4.2.6 EUT OPERATING CONDITIONS ........................................................................... 27 4.2.7 TEST RESULTS ..................................................................................................... 28 4.3 6dB BANDWIDTH MEASUREMENT ...................................................................... 41 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ................................................... 41 4.3.2 TEST INSTRUMENTS ............................................................................................ 41 4.3.3 TEST PROCEDURE ............................................................................................... 41 4.3.4 DEVIATION FROM TEST STANDARD................................................................... 41 4.3.5 TEST SETUP .......................................................................................................... 41 4.3.6 EUT OPERATING CONDITIONS ........................................................................... 41 4.3.7 TEST RESULTS ..................................................................................................... 42 4.4 CONDUCTED OUTPUT POWER MEASUREMENT .............................................. 44 4.4.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT ........................... 44 4.4.2 TEST INSTRUMENTS ............................................................................................ 44 4.4.3 TEST PROCEDURES ............................................................................................ 44 4.4.4 DEVIATION FROM TEST STANDARD................................................................... 45 4.4.5 TEST SETUP .......................................................................................................... 45 4.4.6 EUT OPERATING CONDITIONS ........................................................................... 45 4.4.7 TEST RESULTS ..................................................................................................... 46 4.5 POWER SPECTRAL DENSITY MEASUREMENT ................................................. 48 4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT .............................. 48 4.5.2 TEST INSTRUMENTS ............................................................................................ 48 4.5.3 TEST PROCEDURE ............................................................................................... 48 4.5.4 DEVIATION FROM TEST STANDARD................................................................... 48 4.5.5 TEST SETUP .......................................................................................................... 48 Report No.: RF140606E01 2 of 64 Report Format Version 5.2.0 4.5.6 EUT OPERATING CONDITION .............................................................................. 48 4.5.7 TEST RESULTS ..................................................................................................... 49 4.6 CONDUCTED OUT-BAND EMISSION MEASUREMENT ...................................... 52 4.6.1 LIMITS OF CONDUCTED OUT-BAND EMISSION MEASUREMENT ................... 52 4.6.2 TEST INSTRUMENTS ............................................................................................ 52 4.6.3 TEST PROCEDURE ............................................................................................... 52 4.6.4 DEVIATION FROM TEST STANDARD................................................................... 53 4.6.5 TEST SETUP .......................................................................................................... 53 4.6.6 EUT OPERATING CONDITION .............................................................................. 53 4.6.7 TEST RESULTS ..................................................................................................... 53 5. PHOTOGRAPHS OF THE TEST CONFIGURATION ............................................. 62 INFORMATION ON THE TESTING LABORATORIES ........................................... 63 6. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO 7. THE EUT BY THE LAB ........................................................................................... 64 Report No.: RF140606E01 3 of 64 Report Format Version 5.2.0 RELEASE CONTROL RECORD ISSUE NO. RF140606E01 REASON FOR CHANGE Original release DATE ISSUED July 09, 2014 Report No.: RF140606E01 4 of 64 Report Format Version 5.2.0 2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications:
APPLIED STANDARD: FCC PART 15, SUBPART C (SECTION 15.247) STANDARD SECTION TEST TYPE RESULT REMARK 15.207 AC Power Conducted Emission PASS 15.247(d) 15.209 Radiated Emissions Band Edge Measurement 15.247(d) 15.247(a)(2) 6dB bandwidth 15.247(b) 15.247(e) Conducted Output power Power Spectral Density 15.203 Antenna Requirement PASS PASS PASS PASS PASS PASS Meet the requirement of limit. Minimum passing margin is
-23.22dB at 0.36875MHz Meet the requirement of limit. Minimum passing margin is
-0.7dB at 4874.00MHz Meet the requirement of limit. Meet the requirement of limit. Meet the requirement of limit. Meet the requirement of limit. Antenna connector is IPEX not a standard connector. NOTE: 1. For WLAN: The EUT was operating in 2400 ~ 2483.5MHz, 5.15~5.35GHz, 5.47~5.725GHz and 5.725~5.850GHz frequencies band. This report was recorded the RF parameters including 2400 ~ 2483.5MHz. For the 5.15~5.35GHz, 5.47~5.725GHz and 5.725~5.850GHz RF parameters was recorded in another test report. 2. The DFS report was recorded in another test report. Report No.: RF140606E01 6 of 64 Report Format Version 5.2.0 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2:
This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Conducted emissions Radiated emissions (30MHz-1GHz) Radiated emissions (1GHz -6GHz) Radiated emissions (6GHz -18GHz) Radiated emissions (18GHz -40GHz) Value 2.86 dB 5.43 dB 3.65 dB 3.88 dB 4.11 dB Report No.: RF140606E01 7 of 64 Report Format Version 5.2.0 3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT (WLAN) PRODUCT MODEL NO. POWER SUPPLY 802.11ac+802.11abgn + BT4.0+BT3.0+BT2.1/EDR Module T77H526 5Vdc (from host equipment) CCK, DQPSK, DBPSK for DSSS 64QAM, 16QAM, QPSK, BPSK for OFDM 256QAM for OFDM in 11ac mode only MODULATION TYPE MODULATION TECHNOLOGY DSSS,OFDM TRANSFER RATE OPERATING FREQUENCY NUMBER OF CHANNEL MAXIMUM OUTPUT POWER ANTENNA TYPE DATA CABLE I/O PORTS ASSOCIATED DEVICES NA 802.11b: up to 11Mbps 802.11a / g: up to 54Mbps 802.11n: up to 300Mbps 802.11ac: up to 866.7Mbps For 15.407 5.18 ~ 5.24GHz, 5.26 ~ 5.32GHz, 5.50 ~ 5.70GHz, 5.745 ~
5.825GHz For 15.247 2.412 ~ 2.462GHz For 15.407 24 for 802.11a, 802.11n (HT20), 802.11ac (VHT20) 11 for 802.11n (HT40), 802.11ac (VHT40) 5 for 802.11ac (VHT80) For 15.247 11 for 802.11b, 802.11g, 802.11n (HT20) 7 for 802.11n (HT40) For 15.407 802.11a: 56.013mW 802.11ac (VHT20): 57.161mW 802.11ac (VHT40): 51.021mW 802.11ac (VHT80): 50.873mW For 15.247 802.11b: 113.018mW 802.11g: 606.691mW 802.11n (HT20): 603.594mW 802.11n (HT40): 472.94mW Please see NOTE NA Refer to users manual Report No.: RF140606E01 8 of 64 Report Format Version 5.2.0 Note:
1. There are Bluetooth 4.0 and WLAN technology used for the EUT. 2. For WLAN, 2.4GHz and 5GHz technology can not transmit at same time. 3. WLAN and Bluetooth technology can transmit at same time. 4. Radiated emissions of the simultaneous operation (WLAN & Bluetooth) has been evaluated and no non-compliance was found. 5. The antennas provided to the EUT, please refer to the following table:
Antenna No. Transmitter Circuit Brand Model Antenna Gain(dBi)
<include cable loss>
Cable Loss
(dB) Frequency range
(MHz to MHz) Antenna Connecter Type Type Cable Length
(mm) 1 Chain (0)
(Main port) Corporation DC33001KT00 Wistron Neweb 2400~2500 5150~5350 5470~5725 5725~5850 2400~2500 5150~5350 5470~5725 5725~5850 6. The EUT incorporates a MIMO function without beamforming. 1.54 1.26 0.57 1.23 0.63 0.16 0.35 1.84 1.38 1.98 2.04 2.08 2.13 3.11 3.21 3.27 Wistron Neweb DC33001KT10 Corporation
(Aux port) Chain (1) 2 MODULATION MODE DATA RATE (MCS) PIFA I-PEX 363 PIFA I-PEX 593 802.11a 802.11b 802.11g 802.11n (HT20) 802.11n (HT40) 802.11ac (VHT20)
(5GHz) 802.11ac (VHT40)
(5GHz) 802.11ac (VHT80)
(5GHz) 6 ~ 54Mbps 1 ~ 11Mbps 6 ~ 54Mbps MCS 0~7 MCS 8~15 MCS 0~7 MCS 8~15 MCS0~8 (256QAM) MCS0~8 (256QAM) Nss= 1 Nss= 2 Nss= 1 Nss= 2 Nss= 1 Nss= 2 MCS0~9 (256QAM) MCS0~9 (256QAM) MCS0~9 (256QAM) MCS0~9 (256QAM) TX & RX CONFIGURATION 2RX 2TX 2RX 2TX 2RX 2TX 2TX 2RX 2RX 2TX 2RX 2TX 2TX 2RX 2TX 2TX 2TX 2TX 2TX 2TX 2RX 2RX 2RX 2RX 2RX 2RX Note: The modulation and bandwidth are similar for 802.11n mode for 20MHz (40MHz) and 802.11ac mode for 20MHz (40MHz), therefore investigated worst case to representative mode in test report. (Final test mode refer section 3.2.1) 7. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF140606E01 9 of 64 Report Format Version 5.2.0 3.2 DESCRIPTION OF TEST MODES Operated in 2400 ~ 2483.5MHz band:
11 channels are provided for 802.11b, 802.11g, 802.11n (HT20):
CHANNEL FREQUENCY CHANNEL FREQUENCY 1 2 3 4 5 6 2412MHz 2417MHz 2422MHz 2427MHz 2432MHz 2437MHz 7 8 9 10 11 2442MHz 2447MHz 2452MHz 2457MHz 2462MHz 7 channels are provided for 802.11n (HT40):
CHANNEL FREQUENCY CHANNEL FREQUENCY 3 4 5 6 2422MHz 2427MHz 2432MHz 2437MHz 7 8 9 2442MHz 2447MHz 2452MHz Report No.: RF140606E01 10 of 64 Report Format Version 5.2.0 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL EUT CONFIGURE MODE APPLICABLE TO PLC RE < 1G RE 1G APCM
-
OB DESCRIPTION
-
Where PLC: Power Line Conducted Emission RE 1G: Radiated Emission above 1GHz OB: Conducted Out-Band Emission Measurement RE < 1G: Radiated Emission below 1GHz APCM: Antenna Port Conducted Measurement NOTE: 1. The EUTs antenna (PIFA) had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Y-plane POWER LINE CONDUCTED EMISSION TEST:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11g AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY MODULATI ON TYPE DATA RATE
(Mbps) 1 to 11 6 OFDM BPSK 6 RADIATED EMISSION TEST (BELOW 1 GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11g AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY 1 to 11 6 OFDM MODULATION DATA RATE TYPE BPSK
(Mbps) 6 Report No.: RF140606E01 11 of 64 Report Format Version 5.2.0 RADIATED EMISSION TEST (ABOVE 1 GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11b 802.11g 802.11n (HT20) 802.11n (HT40) AVAILABLE CHANNEL 1 to 11 1 to 11 1 to 11 3 to 9 TESTED CHANNEL 1, 6, 11 1, 6, 11 1, 6, 11 3, 6, 9 MODULATION TECHNOLOGY DSSS OFDM OFDM OFDM MODULATION DATA RATE TYPE DBPSK BPSK BPSK BPSK
(Mbps) 1 6 6.5 13.5 ANTENNA PORT CONDUCTED MEASUREMENT:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11b 802.11g 802.11n (HT20) 802.11n (HT40) AVAILABLE CHANNEL 1 to 11 1 to 11 1 to 11 3 to 9 TESTED CHANNEL 1, 6, 11 1, 6, 11 1, 6, 11 3, 6, 9 MODULATION TECHNOLOGY DSSS OFDM OFDM OFDM MODULATION DATA RATE TYPE DBPSK BPSK BPSK BPSK
(Mbps) 1 6 6.5 13.5 CONDUCTED OUT-BAND EMISSION MEASUREMENT:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11b 802.11g 802.11n (HT20) 802.11n (HT40) AVAILABLE CHANNEL 1 to 11 1 to 11 1 to 11 3 to 9 TESTED CHANNEL 1, 6, 11 1, 6, 11 1, 6, 11 3, 6, 9 MODULATION TECHNOLOGY DSSS OFDM OFDM OFDM MODULATION DATA RATE TYPE DBPSK BPSK BPSK BPSK
(Mbps) 1 6 6.5 13.5 Report No.: RF140606E01 12 of 64 Report Format Version 5.2.0 TEST CONDITION:
APPLICABLE TO ENVIRONMENTAL CONDITIONS PLC RE<1G RE1G APCM OB 25deg. C, 70%RH 25deg. C, 65%RH 22deg. C, 67%RH 26deg. C, 75%RH 25deg. C, 60%RH 25deg. C, 60%RH INPUT POWER
(SYSTEM) 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz TESTED BY Mike Hsieh Nelson Teng Tim Ho Gary Cheng Nelson Teng Nelson Teng Report No.: RF140606E01 13 of 64 Report Format Version 5.2.0 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards:
FCC Part 15, Subpart C (15.247) 558074 D01 DTS Meas Guidance v03r01 662911 D01 Multiple Transmitter Output v02r01 ANSI C63.10-2009 All test items have been performed and recorded as per the above standards. Note: The EUT has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. () Report No.: RF140606E01 14 of 64 Report Format Version 5.2.0 3.4 DUTY CYCLE OF TEST SIGNAL Duty cycle of test signal is 100 %, duty factor is not required. 802.11b 802.11g 802.11n (HT20) 802.11n (HT40) Report No.: RF140606E01 15 of 64 Report Format Version 5.2.0 3.5 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. No. A Serial No. HRJB32S FCC ID FCC DoC Provided by Lab Brand DELL Model No. Product Remark DCNE PC B C PCI to SDIO TEST TOOL NB Foxconn DELL NOTE:
NA NA NA Supplied by client PP32LA DSLB32S FCC DoC Provided by Lab 1. All power cords of the above support units are non-shielded (1.8 m). No. Length (m) Cable Qty. Shielded
(Yes/ No) 1. 2. mini USB to USB UTP RJ-45 1 1 1 10 No No NOTE:
1. The core(s) is(are) originally attached to the cable(s). Cores
(Number) 0 0 Remark Provided by Lab Provided by Lab Report No.: RF140606E01 16 of 64 Report Format Version 5.2.0 PC (A) PCI to SDIO TEST TOOL (B) 3.6 CONFIGURATION OF SYSTEM UNDER TEST NB (C) 2 1 EUT mini-USB in Remote site Report No.: RF140606E01 17 of 64 Report Format Version 5.2.0 4. TEST TYPES AND RESULTS 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) 0.15-0.5 0.5-5 5-30 Quasi-peak CONDUCTED LIMIT (dBV) Average 56 to 46 66 to 56 56 60 46 50 NOTE:
1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 4.1.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER Test Receiver ROHDE & SCHWARZ Line-Impedance Stabilization Network
(for EUT) SCHWARZBECK Line-Impedance Stabilization Network
(for Peripheral) RF Cable
(JYEBAO) 50 ohms Terminator 50 ohms Terminator Software ADT Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL ESCS 30 100375 Apr. 29, 2014 Apr. 28, 2015 NSLK8127 8127-522 Sep. 12, 2013 Sep. 11, 2014 ENV216 100071 Nov. 13, 2013 Nov. 12, 2014 5DFB COCCAB-001 Mar. 10 , 2014 Mar. 09, 2015 N/A N/A BV ADT_Cond_V7.3.7. 3 EMC-03 EMC-02 Sep. 24, 2013 Sep. 23, 2014 Oct. 01, 2013 Sep. 30, 2014 NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. C. 3 The VCCI Con C Registration No. is C-3611. 4 Tested Date: June 27, 2014 Report No.: RF140606E01 18 of 64 Report Format Version 5.2.0 4.1.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. b. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. c. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. d. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) were not recorded. NOTE:
1. The resolution bandwidth of test receiver is 9kHz for Quasi-peak detection (QP) & Average detection (AV). 4.1.4 DEVIATION FROM TEST STANDARD No deviation 4.1.5 TEST SETUP For the actual test configuration, please refer to the related item Photographs of the Test Configuration. Report No.: RF140606E01 19 of 64 Report Format Version 5.2.0 4.1.6 EUT OPERATING CONDITIONS 1. Connect the EUT with the support unit A (PC) which is placed on a testing table. 2. The communication partner run test program DutApiMimoBtFmBrdigeUart.exe
[WIN-X86-2.1.0.44-14.2.201.p98] to enable EUT under transmission/receiving condition continuously at specific channel frequency. Report No.: RF140606E01 20 of 64 Report Format Version 5.2.0 4.1.7 TEST RESULTS PHASE No 1 2 3 4 5 6 Freq.
[MHz]
0.24375 0.36875 1.87500 2.69141 10.76563 20.39063 REMARKS:
Line (L) DETECTOR FUNCTION Quasi-Peak (QP) /
Average (AV) Emission Level
[dB (uV)]
Reading Value
[dB (uV)]
Corr. Factor
(dB) Q.P. AV. Q.P. 25.30 0.07 0.09 29.51 27.93 0.17 27.40 0.20 24.89 0.47 0.72 23.86 25.23 20.37 29.42 25.22 27.76 19.99 27.20 18.76 24.42 17.71 23.14 18.28 Limit
[dB (uV)]
Margin
(dB) AV. Q.P. 61.97 20.44 25.31 58.53 56.00 20.16 56.00 18.96 60.00 18.18 19.00 60.00 AV. Q.P. AV.
-31.52 51.97 48.53
-23.22
-25.84 46.00
-27.04 46.00
-31.82 50.00 50.00
-31.00
-36.66
-29.02
-28.07
-28.60
-35.11
-36.14 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value 21 of 64 Report Format Version 5.2.0 Report No.: RF140606E01 PHASE Neutral (N) DETECTOR FUNCTION Quasi-Peak (QP) /
Average (AV) Emission Level
[dB (uV)]
Reading Value
[dB (uV)]
Corr. Factor
(dB) Q.P. AV. Q.P. 0.07 25.95 27.02 0.09 27.47 0.18 27.23 0.21 0.48 25.74 23.17 0.70 25.88 20.05 26.93 24.81 27.29 20.38 27.02 17.97 25.26 18.81 22.47 17.14 Limit
[dB (uV)]
Margin
(dB) AV. Q.P. 20.12 62.52 58.62 24.90 56.00 20.56 56.00 18.18 19.29 60.00 60.00 17.84 AV. Q.P. AV. 52.52
-32.40
-23.72 48.62
-25.44 46.00
-27.82 46.00 50.00
-30.71
-32.16 50.00
-36.57
-31.60
-28.53
-28.77
-34.26
-36.83 No 1 2 3 4 5 6 Freq.
[MHz]
0.22812 0.36484 1.96094 2.71875 11.12500 19.79688 REMARKS:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF140606E01 22 of 64 Report Format Version 5.2.0 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power:
Frequencies
(MHz) Field strength
(microvolts/meter) Measurement distance
(meters) 0.009-0.490 0.490-1.705 1.705-30.0 30-88 88-216 216-960 Above 960 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 300 30 30 3 3 3 3 NOTE:
1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF140606E01 23 of 64 Report Format Version 5.2.0 4.2.2 TEST INSTRUMENTS For Below 1GHz test:
DESCRIPTION &
MANUFACTURER MXE EMI Receiver Agilent Pre-Amplifier Mini-Circuits Trilog Broadband Antenna SCHWARZBECK RF Cable Spectrum Analyzer R&S Horn_Antenna AISI Pre-Amplifier Agilent MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL N9038A MY50010156 Jan. 15, 2014 Jan. 14, 2015 ZFL-1000VH2 B AMP-ZFL-04 Nov. 13, 2013 Nov. 12, 2014 VULB 9168 9168-361 Feb. 27, 2014 Feb. 26, 2015 NA FSV40 CHHCAB_001 Oct. 06, 2013 Oct. 05, 2014 100964 July 15, 2013 July 14, 2014 AIH.8018 0000220091110 Dec. 06, 2013 Dec. 05, 2014 8449B 3008A01923 Oct. 29, 2013 Oct. 28, 2014 RF Cable NA RF104-205 RF104-207 RF104-202 Dec. 12, 2013 Dec. 11, 2014 Spectrum Analyzer Agilent Pre-Amplifier SPACEK LABS Horn_Antenna SCHWARZBECK Software Antenna Tower & Turn Table CT Note:
NA E4446A MY48250253 Aug. 28, 2013 Aug. 27, 2014 SLKKa-48-6 9K16 Nov. 13, 2013 Nov. 12, 2014 BBHA 9170 9170-424 Oct. 08, 2013 Oct. 07, 2014 ADT_Radiated _V8.7.07 NA NA NA NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3 The test was performed in 966 Chamber No. H. 4. The FCC Site Registration No. is 797305. 5 The CANADA Site Registration No. is IC 7450H-3. 6 Tested Date: June 16, 2014 Report No.: RF140606E01 24 of 64 Report Format Version 5.2.0 For Above 1GHz test:
DESCRIPTION &
MANUFACTURER MXE EMI Receiver Agilent Pre-Amplifier Mini-Circuits Trilog Broadband Antenna SCHWARZBECK RF Cable Spectrum Analyzer R&S Horn_Antenna AISI Pre-Amplifier Agilent MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL N9038A MY51210105 Jan. 21,2014 Jan. 20,2015 ZFL-1000VH2 B AMP-ZFL-03 Nov. 13, 2013 Nov. 12, 2014 VULB 9168 9168-360 Feb. 26, 2014 Feb. 25, 2015 NA FSV40 CHGCAB_001 Oct. 05, 2013 Oct. 04, 2014 100964 July 15, 2013 July 14, 2014 AIH.8018 0000320091110 Nov. 18, 2013 Nov. 17, 2014 8449B 3008A01923 Oct. 29, 2013 Oct. 28, 2014 RF Cable NA RF104-201 RF104-203 RF104-204 Dec. 12, 2013 Dec. 11, 2014 Spectrum Analyzer Agilent Pre-Amplifier SPACEK LABS Horn_Antenna SCHWARZBECK Software Antenna Tower & Turn Table CT Note:
NA E4446A MY48250253 Aug. 28, 2013 Aug. 27, 2014 SLKKa-48-6 9K16 Nov. 13, 2013 Nov. 12, 2014 BBHA 9170 9170-424 Oct. 08, 2013 Oct. 07, 2014 ADT_Radiated _V8.7.07 NA NA NA NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3 The test was performed in 966 Chamber No. G. 4. The FCC Site Registration No. is 966073. 5 The VCCI Site Registration No. is G-137. 6 The CANADA Site Registration No. is IC 7450H-2. 7 Tested Date: June 28, 2014 Report No.: RF140606E01 25 of 64 Report Format Version 5.2.0 4.2.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 3MHz for RMS Average (Duty cycle < 98%) for Average detection (AV) at frequency above 1GHz, then the measurement results was added to a correction factor (10 log(1/duty cycle)). 4. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 10Hz (Duty cycle 98%) for Average detection (AV) at frequency above 1GHz. 5. All modes of operation were investigated and the worst-case emissions are reported. 4.2.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF140606E01 26 of 64 Report Format Version 5.2.0 4.2.5 TEST SETUP
<Frequency Range below 1GHz>
EUT&
Support Units 80cm 3m 10m Turn Table Ground Plane Test Receiver Ant. Tower 1-4m Variable
<Frequency Range above 1GHz>
EUT&
Support Units 3m Ant. Tower 1-4m Variable Turn Table Absorber 80cm Ground Plane Test Receiver For the actual test configuration, please refer to the related item Photographs of the Test Configuration. 4.2.6 EUT OPERATING CONDITIONS Same as 4.1.6 Report No.: RF140606E01 27 of 64 Report Format Version 5.2.0 4.2.7 TEST RESULTS BELOW 1GHz WORST-CASE DATA 802.11g CHANNEL TX Channel 6 FREQUENCY RANGE Below 1GHz DETECTOR FUNCTION Quasi-Peak (QP)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT 224 132 137 146 242 360 TABLE ANGLE
(Degree) 43.5 43.5 43.5 46.0 46.0 46.0
-10.8
-3.0
-3.1
-3.1
-6.3
-10.6
(m) 1.50 H 2.00 H 1.50 H 1.00 H 1.00 H 2.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 32.7 QP 47.33 40.5 QP 53.96 40.4 QP 53.37 42.9 QP 55.95 39.7 QP 50.30 35.4 QP 44.76 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 53.61 48.76 53.32 55.89 47.95 47.35 LEVEL
(dBuV/m) 40.1 QP 36.3 QP 40.4 QP 42.9 QP 35.7 QP 36.7 QP
(m) 1.00 V 1.00 V 2.00 V 1.50 V 2.00 V 1.50 V
-3.4
-7.3
-3.1
-3.2
-10.3
-9.3 43.5 43.5 43.5 46.0 46.0 46.0 TABLE ANGLE
(Degree) 270 246 67 359 0 206 ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-14.62
-13.49
-12.93
-13.04
-10.61
-9.32 CORRECTION FACTOR
(dB/m)
-13.50
-12.51
-12.93
-13.04
-12.29
-10.61 NO. 1 2 3 4 5 6 FREQ.
(MHz) 120.02 133.26 166.53 266.49 331.91 399.81 NO. FREQ.
(MHz) 1 2 3 4 5 6 133.21 156.92 166.53 266.49 283.17 331.86 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value Report No.: RF140606E01 28 of 64 Report Format Version 5.2.0 ABOVE 1GHz DATA 802.11b CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0 74.0 54.0
-26.9
-17.6 LIMIT
(dBuV/m) ANTENNA HEIGHT 355 355 355 355 201 201 TABLE ANGLE
(Degree)
(m) 1.00 H 1.00 H 1.00 H 1.00 H 1.08 H 1.08 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 47.1 PK 49.59 36.4 AV 38.89 105.5 PK 107.87 102.9 AV 105.27 58.6 PK 52.89 50.6 AV 44.89 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 49.09 36.29 101.87 99.17 49.59 47.49 LEVEL
(dBuV/m) 46.6 PK 33.8 AV 99.5 PK 96.8 AV 55.3 PK 53.2 AV
(m) 1.52 V 1.52 V 1.52 V 1.52 V 1.35 V 1.35 V TABLE ANGLE
(Degree) 124 124 124 124 277 277 ANTENNA HEIGHT LIMIT
(dBuV/m)
-18.7
-0.8
-27.4
-20.2
-15.4
-3.4 74.0 54.0 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.49
-2.49
-2.37
-2.37 5.71 5.71 CORRECTION FACTOR
(dB/m)
-2.49
-2.49
-2.37
-2.37 5.71 5.71 NO. FREQ.
(MHz) 1 2 3 4 5 6 2386.00 2386.00
*2412.00
*2412.00 4824.00 4824.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 2386.00 2386.00
*2412.00
*2412.00 4824.00 4824.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01 29 of 64 Report Format Version 5.2.0 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0
-20.4
-20.8 LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-25.7
-18.9
-14.9
-3.1
-22.6
-17.5 347 347 347 347 347 347 211 211 255 255
(m) 1.00 H 1.00 H 1.00 H 1.00 H 1.00 H 1.00 H 1.05 H 1.05 H 1.34 H 1.34 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 53.6 PK 56.07 33.2 AV 35.67 106.2 PK 108.45 103.8 AV 106.05 48.3 PK 50.33 35.1 AV 37.13 59.1 PK 53.20 50.9 AV 45.00 51.4 PK 38.23 36.5 AV 23.33 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 53.87 34.07 101.95 99.35 48.93 35.23 49.70 47.40 39.93 25.63 LEVEL
(dBuV/m) 51.4 PK 31.6 AV 99.7 PK 97.1 AV 46.9 PK 33.2 AV 55.6 PK 53.3 AV 53.1 PK 38.8 AV
(m) 1.49 V 1.49 V 1.49 V 1.49 V 1.49 V 1.49 V 1.34 V 1.34 V 1.00 V 1.00 V 134 134 134 134 134 134 275 275 163 163
-27.1
-20.8
-18.4
-0.7
-20.9
-15.2 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m)
-22.6
-22.4 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.25
-2.25
-2.03
-2.03 5.90 5.90 13.17 13.17 CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.25
-2.25
-2.03
-2.03 5.90 5.90 13.17 13.17 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9 10 2390.00 2390.00
*2437.00
*2437.00 2483.50 2483.50 4874.00 4874.00 7311.00 7311.00 NO. FREQ.
(MHz) 2390.00 1 2390.00 2
*2437.00 3
*2437.00 4 2483.50 5 2483.50 6 4874.00 7 4874.00 8 7311.00 9 10 7311.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01 30 of 64 Report Format Version 5.2.0 CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-24.2
-14.5
-14.6
-3.0
-22.6
-17.5 321 321 321 321 214 214 256 256
(m) 1.00 H 1.00 H 1.00 H 1.00 H 1.05 H 1.05 H 1.30 H 1.30 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 107.2 PK 109.34 104.7 AV 106.84 49.8 PK 51.83 39.5 AV 41.53 59.4 PK 53.29 51.0 AV 44.89 51.4 PK 38.22 36.5 AV 23.32 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 102.54 99.74 49.93 39.63 50.09 46.99 40.72 26.12 LEVEL
(dBuV/m) 100.4 PK 97.6 AV 47.9 PK 37.6 AV 56.2 PK 53.1 AV 53.9 PK 39.3 AV
(m) 1.51 V 1.51 V 1.51 V 1.51 V 1.07 V 1.07 V 1.00 V 1.00 V 134 134 134 134 272 272 157 157
-26.1
-16.4
-17.8
-0.9
-20.1
-14.7 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.14
-2.14
-2.03
-2.03 6.11 6.11 13.18 13.18 CORRECTION FACTOR
(dB/m)
-2.14
-2.14
-2.03
-2.03 6.11 6.11 13.18 13.18 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01 31 of 64 Report Format Version 5.2.0 802.11g CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-1.7
-2.4 MARGIN 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) ANTENNA HEIGHT 325 325 325 325 214 214 TABLE ANGLE
(Degree)
(m) 1.00 H 1.00 H 1.00 H 1.00 H 1.05 H 1.05 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 72.3 PK 74.77 51.6 AV 54.07 106.2 PK 108.57 97.1 AV 99.47 53.6 PK 47.89 45.3 AV 39.59 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 73.27 51.77 102.97 93.77 44.59 41.69 LEVEL
(dBuV/m) 70.8 PK 49.3 AV 100.6 PK 91.4 AV 50.3 PK 47.4 AV
(m) 1.47 V 1.47 V 1.47 V 1.47 V 1.08 V 1.08 V TABLE ANGLE
(Degree) 130 130 130 130 272 272 ANTENNA HEIGHT LIMIT
(dBuV/m)
-23.7
-6.6
-20.4
-8.7 74.0 54.0 74.0 54.0 MARGIN
-3.2
-4.7
(dB) CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.37
-2.37 5.71 5.71 CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.37
-2.37 5.71 5.71 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01 32 of 64 Report Format Version 5.2.0 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0
-16.3
-16.6 LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-14.3
-17.0
-17.4
-5.7
-23.7
-18.6 356 356 356 356 356 356 220 220 255 255
(m) 1.00 H 1.00 H 1.00 H 1.00 H 1.00 H 1.00 H 1.05 H 1.05 H 1.30 H 1.30 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 57.7 PK 60.17 37.4 AV 39.87 110.4 PK 112.65 100.9 AV 103.15 59.7 PK 61.73 37.0 AV 39.03 56.6 PK 50.70 48.3 AV 42.40 50.3 PK 37.13 35.4 AV 22.23 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 57.77 37.87 102.95 93.85 59.33 37.43 52.50 43.50 39.23 28.43 LEVEL
(dBuV/m) 55.3 PK 35.4 AV 100.7 PK 91.6 AV 57.3 PK 35.4 AV 58.4 PK 49.4 AV 52.4 PK 41.6 AV
(m) 1.48 V 1.48 V 1.48 V 1.48 V 1.48 V 1.48 V 1.02 V 1.02 V 1.00 V 1.00 V 132 132 132 132 132 132 263 263 155 155
-16.7
-18.6
-15.6
-4.6
-21.6
-12.4 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m)
-18.7
-18.6 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.25
-2.25
-2.03
-2.03 5.90 5.90 13.17 13.17 CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.25
-2.25
-2.03
-2.03 5.90 5.90 13.17 13.17 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9 10 2390.00 2390.00
*2437.00
*2437.00 2483.50 2483.50 4874.00 4874.00 7311.00 7311.00 NO. FREQ.
(MHz) 2390.00 1 2390.00 2
*2437.00 3
*2437.00 4 2483.50 5 2483.50 6 4874.00 7 4874.00 8 7311.00 9 10 7311.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01 33 of 64 Report Format Version 5.2.0 CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-4.0
-3.8
-20.5
-8.5
-23.4
-18.3 358 358 358 358 203 203 256 256
(m) 1.00 H 1.00 H 1.00 H 1.00 H 1.06 H 1.06 H 1.27 H 1.27 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 106.7 PK 108.84 97.1 AV 99.24 70.0 PK 72.03 50.2 AV 52.23 53.5 PK 47.39 45.5 AV 39.39 50.6 PK 37.42 35.7 AV 22.52 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 103.24 93.84 70.43 50.93 43.59 40.89 39.62 28.92 LEVEL
(dBuV/m) 101.1 PK 91.7 AV 68.4 PK 48.9 AV 49.7 PK 47.0 AV 52.8 PK 42.1 AV
(m) 1.43 V 1.43 V 1.48 V 1.48 V 1.07 V 1.07 V 1.02 V 1.02 V 140 140 140 140 268 268 139 139
-5.6
-5.1
-24.3
-7.0
-21.2
-11.9 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.14
-2.14
-2.03
-2.03 6.11 6.11 13.18 13.18 CORRECTION FACTOR
(dB/m)
-2.14
-2.14
-2.03
-2.03 6.11 6.11 13.18 13.18 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01 34 of 64 Report Format Version 5.2.0 802.11n (HT20) CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-4.2
-3.1 MARGIN 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) ANTENNA HEIGHT 323 323 323 323 219 219 TABLE ANGLE
(Degree)
(m) 1.00 H 1.00 H 1.00 H 1.00 H 1.10 H 1.10 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 69.8 PK 72.27 50.9 AV 53.37 109.3 PK 111.67 99.5 AV 101.87 53.4 PK 47.69 45.2 AV 39.49 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 69.87 51.17 105.97 95.87 44.39 41.69 LEVEL
(dBuV/m) 67.4 PK 48.7 AV 103.6 PK 93.5 AV 50.1 PK 47.4 AV
(m) 1.53 V 1.53 V 1.53 V 1.53 V 1.12 V 1.12 V TABLE ANGLE
(Degree) 134 134 134 134 278 278 ANTENNA HEIGHT LIMIT
(dBuV/m)
-23.9
-6.6
-20.6
-8.8 74.0 54.0 74.0 54.0 MARGIN
-6.6
-5.3
(dB) CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.37
-2.37 5.71 5.71 CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.37
-2.37 5.71 5.71 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01 35 of 64 Report Format Version 5.2.0 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0
-5.4
-11.4 LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-2.4
-7.5
-16.9
-5.5
-23.2
-18.3 357 357 357 357 357 357 231 231 265 265
(m) 1.00 H 1.00 H 1.00 H 1.00 H 1.00 H 1.00 H 1.08 H 1.08 H 1.31 H 1.31 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 68.6 PK 71.07 42.6 AV 45.07 113.5 PK 115.75 103.1 AV 105.35 71.6 PK 73.63 46.5 AV 48.53 57.1 PK 51.20 48.5 AV 42.60 50.8 PK 37.63 35.7 AV 22.53 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 68.97 42.77 109.65 99.65 71.33 46.33 52.20 43.50 38.83 28.33 LEVEL
(dBuV/m) 66.5 PK 40.3 AV 107.4 PK 97.4 AV 69.3 PK 44.3 AV 58.1 PK 49.4 AV 52.0 PK 41.5 AV
(m) 1.51 V 1.51 V 1.51 V 1.51 V 1.51 V 1.51 V 1.07 V 1.07 V 1.00 V 1.00 V 131 131 131 131 131 131 273 273 149 149
-4.7
-9.7
-15.9
-4.6
-22.0
-12.5 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m)
-7.5
-13.7 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.25
-2.25
-2.03
-2.03 5.90 5.90 13.17 13.17 CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.25
-2.25
-2.03
-2.03 5.90 5.90 13.17 13.17 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9 10 2390.00 2390.00
*2437.00
*2437.00 2483.50 2483.50 4874.00 4874.00 7311.00 7311.00 NO. FREQ.
(MHz) 2390.00 1 2390.00 2
*2437.00 3
*2437.00 4 2483.50 5 2483.50 6 4874.00 7 4874.00 8 7311.00 9 10 7311.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01 36 of 64 Report Format Version 5.2.0 CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-0.9
-4.8
-16.8
-5.6
-23.0
-18.2 358 358 358 358 225 225 280 280
(m) 1.00 H 1.00 H 1.00 H 1.00 H 1.07 H 1.07 H 1.36 H 1.36 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 108.4 PK 110.54 98.6 AV 100.74 73.1 PK 75.13 49.2 AV 51.23 57.2 PK 51.09 48.4 AV 42.29 51.0 PK 37.82 35.8 AV 22.62 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 104.44 94.54 72.43 49.33 51.79 43.09 38.32 27.92 LEVEL
(dBuV/m) 102.3 PK 92.4 AV 70.4 PK 47.3 AV 57.9 PK 49.2 AV 51.5 PK 41.1 AV
(m) 1.50 V 1.50 V 1.50 V 1.50 V 1.10 V 1.10 V 1.00 V 1.00 V 142 142 142 142 259 259 155 155
-3.6
-6.7
-16.1
-4.8
-22.5
-12.9 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.14
-2.14
-2.03
-2.03 6.11 6.11 13.18 13.18 CORRECTION FACTOR
(dB/m)
-2.14
-2.14
-2.03
-2.03 6.11 6.11 13.18 13.18 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01 37 of 64 Report Format Version 5.2.0 802.11n (HT40) CHANNEL TX Channel 3 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-3.8
-2.0 MARGIN 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-16.9
-5.5
-23.8
-18.7 TABLE ANGLE
(Degree) 360 360 360 360 221 221 271 271
(m) 1.00 H 1.00 H 1.00 H 1.00 H 1.01 H 1.01 H 1.35 H 1.35 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 70.2 PK 72.67 52.0 AV 54.47 105.7 PK 108.02 95.2 AV 97.52 57.1 PK 51.32 48.5 AV 42.72 50.2 PK 37.00 35.3 AV 22.10 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 70.67 52.27 101.92 92.02 52.52 43.72 38.20 28.10 LEVEL
(dBuV/m) 68.2 PK 49.8 AV 99.6 PK 89.7 AV 58.3 PK 49.5 AV 51.4 PK 41.3 AV
(m) 1.52 V 1.52 V 1.52 V 1.52 V 1.05 V 1.05 V 1.00 V 1.00 V 144 144 144 144 265 265 171 171 TABLE ANGLE
(Degree)
-15.7
-4.5
-22.6
-12.7 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 MARGIN
-5.8
-4.2
(dB) CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.32
-2.32 5.78 5.78 13.20 13.20 CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.32
-2.32 5.78 5.78 13.20 13.20 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 2390.00 2390.00
*2422.00
*2422.00 4844.00 4844.00 7266.00 7266.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 2390.00 2390.00
*2422.00
*2422.00 4844.00 4844.00 7266.00 7266.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01 38 of 64 Report Format Version 5.2.0 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-0.9
-0.9 MARGIN 74.0 54.0 LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-1.5
-3.8
-16.6
-5.3
-23.0
-18.4 354 354 354 354 354 354 225 225 294 294
(m) 1.00 H 1.00 H 1.00 H 1.00 H 1.00 H 1.00 H 1.13 H 1.13 H 1.37 H 1.37 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 73.1 PK 75.57 53.1 AV 55.57 108.6 PK 110.85 98.2 AV 100.45 72.5 PK 74.53 50.2 AV 52.23 57.4 PK 51.50 48.7 AV 42.80 51.0 PK 37.83 35.6 AV 22.43 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 73.87 53.77 102.55 94.65 72.23 50.33 52.10 43.20 38.13 27.83 LEVEL
(dBuV/m) 71.4 PK 51.3 AV 100.3 PK 92.4 AV 70.2 PK 48.3 AV 58.0 PK 49.1 AV 51.3 PK 41.0 AV
(m) 1.50 V 1.50 V 1.50 V 1.50 V 1.50 V 1.50 V 1.12 V 1.12 V 1.02 V 1.02 V 146 146 146 146 146 146 271 271 166 166
-3.8
-5.7
-16.0
-4.9
-22.7
-13.0 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) 74.0 54.0 MARGIN
-2.6
-2.7
(dB) CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.25
-2.25
-2.03
-2.03 5.90 5.90 13.17 13.17 CORRECTION FACTOR
(dB/m)
-2.47
-2.47
-2.25
-2.25
-2.03
-2.03 5.90 5.90 13.17 13.17 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9 10 2390.00 2390.00
*2437.00
*2437.00 2483.50 2483.50 4874.00 4874.00 7311.00 7311.00 NO. FREQ.
(MHz) 2390.00 1 2390.00 2
*2437.00 3
*2437.00 4 2483.50 5 2483.50 6 4874.00 7 4874.00 8 7311.00 9 10 7311.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01 39 of 64 Report Format Version 5.2.0 CHANNEL TX Channel 9 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-3.8
-2.3
-16.3
-5.3
-23.4
-18.6 360 360 360 360 238 238 273 273
(m) 1.00 H 1.00 H 1.00 H 1.00 H 1.03 H 1.03 H 1.34 H 1.34 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 105.9 PK 108.08 95.5 AV 97.68 70.2 PK 72.23 51.7 AV 53.73 57.7 PK 51.68 48.7 AV 42.68 50.6 PK 37.42 35.4 AV 22.22 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 101.88 91.78 70.43 51.33 51.48 42.68 38.52 28.22 LEVEL
(dBuV/m) 99.7 PK 89.6 AV 68.4 PK 49.3 AV 57.5 PK 48.7 AV 51.7 PK 41.4 AV
(m) 1.52 V 1.52 V 1.52 V 1.52 V 1.14 V 1.14 V 1.00 V 1.00 V 152 152 152 152 264 264 160 160
-5.6
-4.7
-16.5
-5.3
-22.3
-12.6 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-2.18
-2.18
-2.03
-2.03 6.02 6.02 13.18 13.18 CORRECTION FACTOR
(dB/m)
-2.18
-2.18
-2.03
-2.03 6.02 6.02 13.18 13.18 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2452.00
*2452.00 2483.50 2483.50 4904.00 4904.00 7356.00 7356.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2452.00
*2452.00 2483.50 2483.50 4904.00 4904.00 7356.00 7356.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01 40 of 64 Report Format Version 5.2.0 4.3 6dB BANDWIDTH MEASUREMENT 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.3.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSV 40 100964 July 15, 2013 July 14, 2014 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 01, 2014 4.3.3 TEST PROCEDURE 1. Set resolution bandwidth (RBW) = 100kHz. 2. Set the video bandwidth (VBW) 3 x RBW, Detector = Peak. 3. Trace mode = max hold. 4. Sweep = auto couple. 5. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.3.4 DEVIATION FROM TEST STANDARD No deviation 4.3.5 TEST SETUP Attenuator EUT SPECTRUM ANALYZER 4.3.6 EUT OPERATING CONDITIONS The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF140606E01 41 of 64 Report Format Version 5.2.0 4.3.7 TEST RESULTS 802.11b CHANNEL 1 6 11 802.11g CHANNEL 1 6 11 CHANNEL FREQUENCY
(MHz) 2412 2437 2462 6dB BANDWIDTH (MHz) CHAIN 1 CHAIN 0 10.12 10.13 10.12 10.10 10.09 10.10 MINIMUM LIMIT (MHz) PASS / FAIL 0.5 0.5 0.5 PASS PASS PASS CHANNEL FREQUENCY
(MHz) 2412 2437 2462 6dB BANDWIDTH (MHz) CHAIN 1 CHAIN 0 16.58 16.54 16.57 16.59 16.59 16.57 MINIMUM LIMIT (MHz) PASS / FAIL 0.5 0.5 0.5 PASS PASS PASS 802.11n (HT20) CHANNEL 1 6 11 CHANNEL FREQUENCY
(MHz) 2412 2437 2462 6dB BANDWIDTH (MHz) CHAIN 1 CHAIN 0 17.73 17.70 17.70 17.69 17.71 17.74 MINIMUM LIMIT (MHz) PASS / FAIL 0.5 0.5 0.5 PASS PASS PASS 802.11n (HT40) CHANNEL FREQUENCY
(MHz) 2422 2437 2452 6dB BANDWIDTH (MHz) CHAIN 1 CHAIN 0 36.56 36.50 36.14 36.52 36.51 36.52 MINIMUM LIMIT (MHz) PASS / FAIL 0.5 0.5 0.5 PASS PASS PASS CHANNEL 3 6 9 Report No.: RF140606E01 42 of 64 Report Format Version 5.2.0 802.11b / Chain (1) : CH11 802.11g / Chain (1) : CH1 SPECTRUM PLOT OF WORST VALUE 802.11n (HT20) / Chain (1) : CH6 802.11n (HT40) / Chain (1) : CH6 Report No.: RF140606E01 43 of 64 Report Format Version 5.2.0 4.4 CONDUCTED OUTPUT POWER MEASUREMENT 4.4.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT For systems using digital modulation in the 24002483.5 MHz bands: 1 Watt
(30dBm) Per KDB 662911 D01 Multiple Transmitter Output Method of conducted output power measurement on IEEE 802.11 devices, Array Gain = 0 dB (i.e., no array gain) for NANT 4;
Array Gain = 0 dB (i.e., no array gain) for channel widths 40 MHz for any NANT;
Array Gain = 5 log(NANT/NSS) dB or 3 dB, whichever is less for 20-MHz channel widths with NANT 5. For power measurements on all other devices: Array Gain = 10 log(NANT/NSS) dB. 4.4.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER Power meter Anritsu Power sensor Anritsu Note:
MODEL NO. SERIAL NO. ML2495A 1014008 CALIBRATED DATE Apr. 30, 2014 CALIBRATED UNTIL Apr. 29, 2015 MA2411B 0917122 Apr. 30, 2014 Apr. 29, 2015 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 01, 2014 4.4.3 TEST PROCEDURES The peak / average power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak / average power sensor. Record the peak power level. Report No.: RF140606E01 44 of 64 Report Format Version 5.2.0 4.4.4 DEVIATION FROM TEST STANDARD No deviation. 4.4.5 TEST SETUP EUT Attenuator Power Sensor Power Meter 4.4.6 EUT OPERATING CONDITIONS Same as Item 4.3.6 Report No.: RF140606E01 45 of 64 Report Format Version 5.2.0 4.4.7 TEST RESULTS FOR PEAK POWER 802.11b CHANNEL FREQUENCY
(MHz) 2412 2437 2462 1 6 11 802.11g CHANNEL FREQUENCY
(MHz) 1 6 11 2412 2437 2462 802.11n (HT20) CHANNEL FREQUENCY
(MHz) 1 6 11 2412 2437 2462 802.11n (HT40) CHANNEL FREQUENCY
(MHz) 3 6 9 2422 2437 2452 PEAK POWER (dBm) CHAIN 0 16.61 16.53 17.62 CHAIN 1 16.44 15.98 17.42 TOTAL POWER
(mW) 89.869 84.606 113.018 TOTAL POWER
(dBm) 19.54 19.27 20.53 LIMIT
(dBm) PASS /
FAIL 30 30 30 PASS PASS PASS PEAK POWER (dBm) CHAIN 0 23.85 24.62 22.85 CHAIN 1 24.21 25.01 23.33 TOTAL POWER
(mW) 506.294 606.691 408.03 TOTAL POWER
(dBm) 27.04 27.83 26.11 LIMIT
(dBm) PASS /
FAIL 30 30 30 PASS PASS PASS PEAK POWER (dBm) CHAIN 0 22.76 24.46 21.66 CHAIN 1 23.01 25.11 22.85 TOTAL POWER
(mW) 388.785 603.594 339.307 TOTAL POWER
(dBm) 25.90 27.81 25.31 LIMIT
(dBm) PASS /
FAIL 30 30 30 PASS PASS PASS PEAK POWER (dBm) CHAIN 0 20.76 23.58 21.01 CHAIN 1 21.61 23.89 21.84 TOTAL POWER
(mW) 264.001 472.94 278.94 TOTAL POWER
(dBm) 24.22 26.75 24.46 LIMIT
(dBm) PASS /
FAIL 30 30 30 PASS PASS PASS Report No.: RF140606E01 46 of 64 Report Format Version 5.2.0 FOR AVERAGE POWER 802.11b CHANNEL FREQUENCY
(MHz) 2412 2437 2462 1 6 11 802.11g CHANNEL FREQUENCY
(MHz) 1 6 11 2412 2437 2462 802.11n (HT20) CHANNEL FREQUENCY
(MHz) 1 6 11 2412 2437 2462 802.11n (HT40) CHANNEL FREQUENCY
(MHz) 3 6 9 2422 2437 2452 AVERAGE POWER
(dBm) CHAIN 0 13.66 13.57 14.74 CHAIN 1 13.18 12.89 14.17 AVERAGE POWER
(dBm) CHAIN 0 14.57 16.63 13.51 CHAIN 1 14.72 17.22 13.52 AVERAGE POWER
(dBm) CHAIN 0 13.59 16.61 12.45 CHAIN 1 13.74 17.21 13.27 AVERAGE POWER
(dBm) CHAIN 0 11.46 14.48 11.29 CHAIN 1 12.41 14.83 11.89 TOTAL POWER
(mW) 44.024 42.205 55.907 TOTAL POWER
(mW) 58.290 98.749 44.930 TOTAL POWER
(mW) 46.515 98.416 38.811 TOTAL POWER
(mW) 31.414 58.463 28.912 TOTAL POWER
(dBm) 16.44 16.25 17.47 TOTAL POWER
(dBm) 17.66 19.95 16.53 TOTAL POWER
(dBm) 16.68 19.93 15.89 TOTAL POWER
(dBm) 14.97 17.67 14.61 Report No.: RF140606E01 47 of 64 Report Format Version 5.2.0 4.5 POWER SPECTRAL DENSITY MEASUREMENT 4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT The Maximum of Power Spectral Density Measurement is 8dBm. 4.5.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSV 40 100964 July 15, 2013 July 14, 2014 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 01, 2014 4.5.3 TEST PROCEDURE 1. Set the RBW = 3 kHz, VBW =10 kHz, Detector = peak. 2. Sweep time = auto couple, Trace mode = max hold, allow trace to fully stabilize. 3. Use the peak marker function to determine the maximum amplitude level. 4.5.4 DEVIATION FROM TEST STANDARD No deviation 4.5.5 TEST SETUP 4.5.6 EUT OPERATING CONDITION Attenuator EUT SPECTRUM ANALYZER Same as Item 4.3.6 Report No.: RF140606E01 48 of 64 Report Format Version 5.2.0 4.5.7 TEST RESULTS 802.11b TX CHAIN CHANNEL FREQUENCY 0 1 1 6 11 1 6 11 0 1 1 6 11 1 6 11
(MHz) 2412 2437 2462 2412 2437 2462
(MHz) 2412 2437 2462 2412 2437 2462 802.11g CHAIN CHANNEL FREQUENCY TX PSD
(dBm)
-12.61
-12.29
-11.34
-11.04
-10.61
-10.24 10 log (N=2) dB 3.01 3.01 3.01 3.01 3.01 3.01 TOTAL PSD
(dBm)
-9.60 LIMIT
(dBm) 8
-9.28
-8.33
-8.03
-7.60
-7.23 8 8 8 8 8 PASS
/FAIL PASS PASS PASS PASS PASS PASS PSD
(dBm)
-12.62
-10.87
-14.32
-12.23
-9.93
-12.95 10 log (N=2) dB 3.01 3.01 3.01 3.01 3.01 3.01 TOTAL PSD
(dBm)
-9.61 LIMIT
(dBm) 8
-7.86
-11.31
-9.22
-6.92
-9.94 8 8 8 8 8 PASS
/FAIL PASS PASS PASS PASS PASS PASS NOTE: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 4.11dBi < 6dBi , so the power limit shall not be reduced. NOTE: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 4.11dBi < 6dBi , so the power limit shall not be reduced. Report No.: RF140606E01 49 of 64 Report Format Version 5.2.0 802.11n (HT20) CHAIN CHANNEL FREQUENCY TX 0 1 1 6 11 1 6 11 0 1 3 6 9 3 6 9
(MHz) 2412 2437 2462 2412 2437 2462
(MHz) 2422 2437 2452 2422 2437 2452 802.11n (HT40) CHAIN CHANNEL FREQUENCY TX PSD
(dBm)
-13.80
-10.58
-14.09
-13.46
-10.55
-14.16 10 log (N=2) dB 3.01 3.01 3.01 3.01 3.01 3.01 Total PSD
(dBm)
-10.79
-7.57
-11.08
-10.45
-7.54
-11.15 Limit
(dBm) 8 8 8 8 8 8 PASS
/FAIL PASS PASS PASS PASS PASS PASS NOTE: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 4.11dBi < 6dBi , so the power limit shall not be reduced. PSD
(dBm)
-19.24
-16.86
-20.00
-17.85
-16.28
-17.73 10 log (N=2) dB 3.01 3.01 3.01 3.01 3.01 3.01 TOTAL PSD
(dBm)
-16.23
-13.85
-16.99
-14.84
-13.27
-14.72 LIMIT
(dBm) 8 8 8 8 8 8 PASS
/FAIL PASS PASS PASS PASS PASS PASS NOTE: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 4.11dBi < 6dBi , so the power limit shall not be reduced. Report No.: RF140606E01 50 of 64 Report Format Version 5.2.0 802.11b / Chain (1) : CH11 802.11g / Chain (1) : CH6 SPECTRUM PLOT OF WORST VALUE 802.11n (HT20) / Chain(1) : CH6 802.11n (HT40) / Chain(1) : CH6 Report No.: RF140606E01 51 of 64 Report Format Version 5.2.0 4.6 CONDUCTED OUT-BAND EMISSION MEASUREMENT 4.6.1 LIMITS OF CONDUCTED OUT-BAND EMISSION MEASUREMENT Below 20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.6.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSV 40 100964 July 15, 2013 July 14, 2014 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 01, 2014 4.6.3 TEST PROCEDURE Measurement Procedure - Reference Level 1. Set the RBW = 100 kHz. 2. Set the VBW 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. Measurement Procedure Unwanted Emission Level 1. Set RBW = 100 kHz. 2. Set VBW 300 kHz. 3. Set span to encompass the spectrum to be examined 4. Detector = peak. 5. Trace Mode = max hold. 6. Sweep = auto couple. Report No.: RF140606E01 52 of 64 Report Format Version 5.2.0 4.6.4 DEVIATION FROM TEST STANDARD No deviation 4.6.5 TEST SETUP EUT Attenuator SPECTRUM ANALYZER 4.6.6 EUT OPERATING CONDITION Same as Item 4.3.6 4.6.7 TEST RESULTS The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement. Report No.: RF140606E01 53 of 64 Report Format Version 5.2.0 802.11b Chain (0) CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF140606E01 54 of 64 Report Format Version 5.2.0 Chain (1) CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF140606E01 55 of 64 Report Format Version 5.2.0 802.11g Chain (0) CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF140606E01 56 of 64 Report Format Version 5.2.0 Chain (1) CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF140606E01 57 of 64 Report Format Version 5.2.0 802.11n (HT20) Chain (0) CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF140606E01 58 of 64 Report Format Version 5.2.0 Chain (1) CH 1 CH 6 CH 11 CH 1 Band edge CH 11 Band edge Report No.: RF140606E01 59 of 64 Report Format Version 5.2.0 802.11n (HT40) Chain (0) CH 3 CH 6 CH 9 CH 3 Band edge CH 9 Band edge Report No.: RF140606E01 60 of 64 Report Format Version 5.2.0 Chain (1) CH 3 CH 6 CH 9 CH 3 Band edge CH 9 Band edge Report No.: RF140606E01 61 of 64 Report Format Version 5.2.0 5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF140606E01 62 of 64 Report Format Version 5.2.0 6. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following:
Linko EMC/RF Lab:
Tel: 886-2-26052180 Fax: 886-2-26052943 Hwa Ya EMC/RF/Safety/Telecom Lab:
Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com Hsin Chu EMC/RF Lab:
Tel: 886-3-5935343 Fax: 886-3-5935342 The address and road map of all our labs can be found in our web site also. Report No.: RF140606E01 63 of 64 Report Format Version 5.2.0 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No modifications were made to the EUT by the lab during the test.
--- END ---
Report No.: RF140606E01 64 of 64 Report Format Version 5.2.0
1 2 3 | Test Report (NII) | Test Report | 1.12 MiB | July 15 2014 |
FCC TEST REPORT
(WLAN 15.407) REPORT NO.: RF140606E01-1 MODEL NO.: T77H526 FCC ID: MCLT77H526 RECEIVED: June 06, 2014 TESTED: June 18 to July 02, 2014 ISSUED: July 09, 2014 APPLICANT: Hon Hai PRECISION IND.CO.,LTD ADDRESS: 5F-1, Hsin-An Road, Hsinchu, Science Industrial Park, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services
(H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF140606E01-1 1 of 97 Report Format Version 5.3.0 Table of Contents RELEASE CONTROL RECORD .......................................................................................... 4 CERTIFICATION ...................................................................................................... 5 1. 2. SUMMARY OF TEST RESULTS .............................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ........................................................................... 7 GENERAL INFORMATION ....................................................................................... 8 3. GENERAL DESCRIPTION OF EUT (WLAN) ........................................................... 8 3.1 3.2 DESCRIPTION OF TEST MODES ......................................................................... 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ......................... 12 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................ 15 3.3 DUTY CYCLE OF TEST SIGNAL ........................................................................... 16 3.4 3.5 DESCRIPTION OF SUPPORT UNITS ................................................................... 17 CONFIGURATION OF SYSTEM UNDER TEST .................................................... 18 3.6 4. TEST TYPES AND RESULTS ................................................................................ 19 4.1 CONDUCTED EMISSION MEASUREMENT ......................................................... 19 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT....................................... 19 4.1.2 TEST INSTRUMENTS ........................................................................................... 19 4.1.3 TEST PROCEDURES ............................................................................................ 20 4.1.4 DEVIATION FROM TEST STANDARD .................................................................. 20 4.1.5 TEST SETUP ......................................................................................................... 20 4.1.6 EUT OPERATING CONDITIONS ........................................................................... 21 4.1.7 TEST RESULTS ..................................................................................................... 22 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................. 24 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 24 4.2.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS .......... 25 4.2.3 TEST INSTRUMENTS ........................................................................................... 26 4.2.4 TEST PROCEDURES ............................................................................................ 28 4.2.5 DEVIATION FROM TEST STANDARD .................................................................. 28 4.2.6 TEST SETUP ......................................................................................................... 29 4.2.7 EUT OPERATING CONDITION ............................................................................. 29 4.2.8 TEST RESULTS ..................................................................................................... 30 4.3 TRANSMIT POWER MEASUREMENT .................................................................. 69 4.3.1 LIMITS OF TRANSMIT POWER MEASUREMENT ............................................... 69 4.3.2 TEST INSTRUMENTS ........................................................................................... 70 4.3.3 TEST PROCEDURE .............................................................................................. 70 4.3.4 DEVIATION FROM TEST STANDARD .................................................................. 71 4.3.5 TEST SETUP ......................................................................................................... 71 4.3.6 EUT OPERATING CONDITIONS ........................................................................... 71 4.3.7 TEST RESULTS ..................................................................................................... 72 Report No.: RF140606E01-1 2 of 97 Report Format Version 5.3.0 4.4 PEAK POWER SPECTRAL DENSITY MEASUREMENT ...................................... 80 4.4.1 LIMITS OF PEAK POWER SPECTRAL DENSITY MEASUREMENT.................... 80 4.4.2 TEST INSTRUMENTS ........................................................................................... 80 4.4.3 TEST PROCEDURES ............................................................................................ 81 4.4.4 DEVIATION FROM TEST STANDARD .................................................................. 82 4.4.5 TEST SETUP ......................................................................................................... 82 4.4.6 EUT OPERATING CONDITIONS ........................................................................... 82 4.4.7 TEST RESULTS ..................................................................................................... 83 4.5 FREQUENCY STABILITY ...................................................................................... 89 4.5.1 LIMITS OF FREQUENCY STABILITY MEASUREMENT ....................................... 89 4.5.2 TEST INSTRUMENTS ........................................................................................... 89 4.5.3 TEST PROCEDURE .............................................................................................. 89 4.5.4 DEVIATION FROM TEST STANDARD .................................................................. 90 4.5.5 TEST SETUP ......................................................................................................... 90 4.5.6 EUT OPERATING CONDITION ............................................................................. 90 4.5.7 TEST RESULTS ..................................................................................................... 91 4.6 6DB BANDWIDTH MEASUREMENT ..................................................................... 92 4.6.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT .................................................. 92 4.6.2 TEST INSTRUMENTS ........................................................................................... 92 4.6.3 TEST PROCEDURE .............................................................................................. 92 4.6.4 DEVIATION FROM TEST STANDARD .................................................................. 92 4.6.5 TEST SETUP ......................................................................................................... 92 4.6.6 EUT OPERATING CONDITIONS ........................................................................... 92 4.6.7 TEST RESULTS ..................................................................................................... 93 PHOTOGRAPHS OF THE TEST CONFIGURATION ............................................. 95 5. INFORMATION ON THE TESTING LABORATORIES ........................................... 96 6. 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ............................................................................................ 97 Report No.: RF140606E01-1 3 of 97 Report Format Version 5.3.0 RELEASE CONTROL RECORD ISSUE NO. RF140606E01-1 REASON FOR CHANGE Original release DATE ISSUED July 09, 2014 Report No.: RF140606E01-1 4 of 97 Report Format Version 5.3.0 2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications:
For 5GHz, 5150~5250MHz APPLIED STANDARD: FCC PART 15, SUBPART E (SECTION 15.407) STANDARD SECTION TEST TYPE RESULT REMARK 15.407(b)(6) AC Power Conducted Emission PASS 15.407 Radiated Emissions & Band Edge Measurement
(b)(1/2/3/4/6) 15.407(a/1/2/3) Transmit Power 15.407(a/1/2/3) Peak Power Spectral Density 15.407(e) 6dB bandwidth 15.407(g) Frequency Stability 15.203 Antenna Requirement Meet the requirement of limit. Minimum passing margin is
-21.59dB at 0.36484MHz Meet the requirement of limit. Minimum passing margin is
-0.3dB at 5470.00MHz. PASS PASS Meet the requirement of limit. PASS Meet the requirement of limit. PASS Meet the requirement of limit. PASS Meet the requirement of limit. PASS Antenna connector is IPEX not a
(U-NII-3 Band only) standard connector. NOTE: 1. For WLAN: The EUT was operating in 2400 ~ 2483.5MHz, 5.15~5.35GHz, 5.47~5.725GHz and 5.725~5.850GHz frequencies band. This report was recorded the RF parameters including 5.15~5.35GHz, 5.47~5.725GHz and 5.725~5.850GHz. For the 2400 ~ 2483.5MHz RF parameters was recorded in another test report. 2. The DFS report was recorded in another test report. Report No.: RF140606E01-1 6 of 97 Report Format Version 5.3.0 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2:
This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Conducted emissions Radiated emissions (30MHz-1GHz) Radiated emissions (1GHz -6GHz) Radiated emissions (6GHz -18GHz) Radiated emissions (18GHz -40GHz) Value 2.86 dB 5.43 dB 3.65 dB 3.88 dB 4.11 dB Report No.: RF140606E01-1 7 of 97 Report Format Version 5.3.0 3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT (WLAN) PRODUCT MODEL NO. POWER SUPPLY 802.11ac+802.11abgn + BT4.0+BT3.0+BT2.1/EDR Module T77H526 5Vdc (from host equipment) CCK, DQPSK, DBPSK for DSSS 64QAM, 16QAM, QPSK, BPSK for OFDM 256QAM for OFDM in 11ac mode only DSSS,OFDM 802.11b: up to 11Mbps 802.11a / g: up to 54Mbps 802.11n: up to 300Mbps 802.11ac: up to 866.7Mbps For 15.407 5.18 ~ 5.24GHz, 5.26 ~ 5.32GHz, 5.50 ~ 5.70GHz, 5.745 ~
5.825GHz For 15.247 2.412 ~ 2.462GHz For 15.407 24 for 802.11a, 802.11n (HT20), 802.11ac (VHT20) 11 for 802.11n (HT40), 802.11ac (VHT40) 5 for 802.11ac (VHT80) For 15.247 11 for 802.11b, 802.11g, 802.11n (HT20) 7 for 802.11n (HT40) For 15.407 802.11a: 56.013mW 802.11ac (VHT20): 57.161mW 802.11ac (VHT40): 51.021mW 802.11ac (VHT80): 50.873mW For 15.247 802.11b: 113.018mW 802.11g: 606.691mW 802.11n (HT20): 603.594mW 802.11n (HT40): 472.94mW Please see NOTE NA Refer to users manual NA MODULATION TYPE MODULATION TECHNOLOGY TRANSFER RATE OPERATING FREQUENCY NUMBER OF CHANNEL MAXIMUM OUTPUT POWER ANTENNA TYPE DATA CABLE I/O PORTS ASSOCIATED DEVICES Report No.: RF140606E01-1 8 of 97 Report Format Version 5.3.0 NOTE:
1. There are Bluetooth 4.0 and WLAN technology used for the EUT. 2. For WLAN, 2.4GHz and 5GHz technology can not transmit at same time. 3. WLAN and Bluetooth technology can transmit at same time. 4. Radiated emissions of the simultaneous operation (WLAN & Bluetooth) has been evaluated and no non-compliance was found. 5. The antennas provided to the EUT, please refer to the following table:
Antenna No. Transmitter Circuit Brand Model Antenna Gain(dBi)
<include cable loss>
Cable Loss
(dB) Frequency range
(MHz to MHz) Antenna Connecter Type Type Cable Length
(mm) 1 Chain (0)
(Main port) Corporation DC33001KT00 Wistron Neweb 2400~2500 5150~5350 5470~5725 5725~5850 2400~2500 5150~5350 5470~5725 5725~5850 6. The EUT incorporates a MIMO function without beamforming. 1.54 1.26 0.57 1.23 0.63 0.16 0.35 1.84 1.38 1.98 2.04 2.08 2.13 3.11 3.21 3.27 Wistron Neweb DC33001KT10 Corporation
(Aux port) Chain (1) 2 MODULATION MODE DATA RATE (MCS) PIFA I-PEX 363 PIFA I-PEX 593 802.11a 802.11b 802.11g 802.11n (HT20) 802.11n (HT40) 802.11ac (VHT20)
(5GHz) 802.11ac (VHT40)
(5GHz) 802.11ac (VHT80)
(5GHz) 6 ~ 54Mbps 1 ~ 11Mbps 6 ~ 54Mbps MCS 0~7 MCS 8~15 MCS 0~7 MCS 8~15 MCS0~8 (256QAM) MCS0~8 (256QAM) Nss= 1 Nss= 2 Nss= 1 Nss= 2 Nss= 1 Nss= 2 MCS0~9 (256QAM) MCS0~9 (256QAM) MCS0~9 (256QAM) MCS0~9 (256QAM) TX & RX CONFIGURATION 2RX 2TX 2RX 2TX 2TX 2RX 2RX 2TX 2RX 2TX 2TX 2RX 2RX 2TX 2TX 2TX 2TX 2TX 2TX 2TX 2RX 2RX 2RX 2RX 2RX 2RX Note: The modulation and bandwidth are similar for 802.11n mode for 20MHz (40MHz) and 802.11ac mode for 20MHz (40MHz), therefore investigated worst case to representative mode in test report. (Final test mode refer section 3.2.1) 7. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF140606E01-1 9 of 97 Report Format Version 5.3.0 3.2 DESCRIPTION OF TEST MODES Operated in 5150 ~ 5250MHz band:
4 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20):
CHANNEL FREQUENCY CHANNEL FREQUENCY 36 40 5180 MHz 5200 MHz 44 48 5220 MHz 5240 MHz 2 channels are provided for 802.11n (HT40), 802.11ac (VHT40):
CHANNEL 38 FREQUENCY 5190 MHz CHANNEL 46 FREQUENCY 5230 MHz 1 channel is provided for 802.11ac (VHT80):
CHANNEL 42 FREQUENCY 5210 MHz Operated in 5250 ~ 5350MHz band:
4 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20):
CHANNEL FREQUENCY CHANNEL FREQUENCY 52 56 5260 MHz 5280 MHz 60 64 5300 MHz 5320 MHz 2 channels are provided for 802.11n (HT40), 802.11ac (VHT40):
CHANNEL 54 FREQUENCY 5270 MHz CHANNEL 62 FREQUENCY 5310 MHz 1 channel is provided for 802.11ac (VHT80):
CHANNEL 58 FREQUENCY 5290 MHz Report No.: RF140606E01-1 10 of 97 Report Format Version 5.3.0 Operated in 5470MHz ~ 5725MHz bands:
11 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20):
CHANNEL FREQUENCY CHANNEL FREQUENCY 100 104 108 112 116 120 5500 MHz 5520 MHz 5540 MHz 5560 MHz 5580 MHz 5600 MHz 124 128 132 136 140 5620 MHz 5640 MHz 5660 MHz 5680 MHz 5700 MHz 5 channels are provided for 802.11n (HT40), 802.11ac (VHT40):
CHANNEL FREQUENCY CHANNEL FREQUENCY 102 110 118 5510 MHz 5550 MHz 5590 MHz 126 134 5630 MHz 5670 MHz 2 channels are provided for 802.11ac (VHT80):
CHANNEL FREQUENCY 106 122 5530 MHz 5610 MHz Operated in 5725 ~ 5850MHz band:
5 channels are provided for 802.11a, 802.11n (HT20), 802.11ac (VHT20):
CHANNEL FREQUENCY CHANNEL FREQUENCY 149 153 157 5745 MHz 5765 MHz 5785 MHz 161 165 5805 MHz 5825 MHz 2 channels are provided for 802.11n (HT40), 802.11ac (VHT40):
CHANNEL FREQUENCY 151 159 5755 MHz 5795 MHz 1 channel is provided for 802.11ac (VHT80):
CHANNEL 155 FREQUENCY 5775 MHz Report No.: RF140606E01-1 11 of 97 Report Format Version 5.3.0 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL EUT CONFIGURE MODE APPLICABLE TO PLC RE < 1G RE 1G APCM DESCRIPTION
-
-
Where PLC: Power Line Conducted Emission RE 1G: Radiated Emission above 1GHz RE < 1G: Radiated Emission below 1GHz APCM: Antenna Port Conducted Measurement NOTE: 1. -means no effect. NOTE: 1. The EUTs antenna (PIFA) had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on X-plane (below 1GHz) and Z-plane (above 1GHz). POWER LINE CONDUCTED EMISSION TEST:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11a AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY 36 to 165 157 OFDM MODULATION DATA RATE TYPE BPSK
(MBPS) 6 COMBINATION MODE B RADIATED EMISSION TEST (BELOW 1 GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11a AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY 36 to 165 157 OFDM MODULATION DATA RATE COMBINATION TYPE BPSK
(Mbps) MODE 6 A Report No.: RF140606E01-1 12 of 97 Report Format Version 5.3.0 RADIATED EMISSION TEST (ABOVE 1 GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY MODULATI ON TYPE DATA RATE
(Mbps) 802.11a 36 to 165 802.11ac (VHT20) 36 to 165 802.11ac (VHT40) 38 to 159 802.11ac (VHT80) 42 to 155 36, 40, 48, 52, 60, 64, 100, 120, 140, 149, 157, 165 36, 40, 48, 52, 60, 64, 100, 120, 140, 149, 157, 165 38, 46, 54, 62, 102, 118, 134, 151, 159 42, 58, 106, 122, 155 OFDM BPSK 6 OFDM BPSK 6.5 OFDM BPSK 13.5 OFDM BPSK 29.3 ANTENNA PORT CONDUCTED MEASUREMENT:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY MODULATI ON TYPE DATA RATE
(Mbps) 802.11a 36 to 165 802.11ac (VHT20) 36 to 165 802.11ac (VHT40) 38 to 159 802.11ac (VHT80) 42 to 155 36, 40, 48, 52, 60, 64, 100, 120, 140, 149, 157, 165 36, 40, 48, 52, 60, 64, 100, 120, 140, 149, 157, 165 38, 46, 54, 62, 102, 118, 134, 151, 159 42, 58, 106, 122, 155 OFDM BPSK 6 OFDM BPSK 6.5 OFDM BPSK 13.5 OFDM BPSK 29.3 Report No.: RF140606E01-1 13 of 97 Report Format Version 5.3.0 TEST CONDITION:
APPLICABLE TO ENVIRONMENTAL CONDITIONS PLC RE<1G RE1G APCM 25deg. C, 70%RH 26deg. C, 75%RH 25deg. C, 65%RH 25deg. C, 60%RH INPUT POWER
(SYSTEM) 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz TESTED BY Mike Hsieh Tim Ho Gary Cheng Nelson Teng Nelson Teng Report No.: RF140606E01-1 14 of 97 Report Format Version 5.3.0 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards:
FCC Part 15, Subpart E (15.407) 789033 D02 General UNII Test Procedures New Rules v01 662911 D01 Multiple Transmitter Output v02r01 ANSI C63.10-2009 All test items have been performed and recorded as per the above standards. Note: The EUT has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. () Report No.: RF140606E01-1 15 of 97 Report Format Version 5.3.0 3.4 DUTY CYCLE OF TEST SIGNAL Duty cycle of test signal is 100 %, duty factor is not required. 802.11a 802.11ac (VHT20) 802.11ac (VHT40) 802.11ac (VHT80) Report No.: RF140606E01-1 16 of 97 Report Format Version 5.3.0 3.5 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. No. A Serial No. HRJB32S FCC ID FCC DoC Provided by Lab Brand DELL Model No. Product Remark DCNE PC B C PCI to SDIO TEST TOOL NB Foxconn DELL NOTE:
NA NA NA Supplied by client PP32LA DSLB32S FCC DoC Provided by Lab 1. All power cords of the above support units are non-shielded (1.8 m). No. Length (m) Cable Qty. Shielded
(Yes/ No) 1. 2. mini USB to USB UTP RJ-45 1 1 1 10 No No NOTE:
1. The core(s) is(are) originally attached to the cable(s). Cores
(Number) 0 0 Remark Provided by Lab Provided by Lab Report No.: RF140606E01-1 17 of 97 Report Format Version 5.3.0 3.6 CONFIGURATION OF SYSTEM UNDER TEST PCI to SDIO TEST TOOL (B) EUT mini-USB in 1 Remote site PC (A) 2 NB (B) Report No.: RF140606E01-1 18 of 97 Report Format Version 5.3.0 4. TEST TYPES AND RESULTS 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) 0.15-0.5 0.5-5 5-30 CONDUCTED LIMIT (dBV) Average Quasi-peak 56 to 46 66 to 56 56 60 46 50 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 4.1.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER Test Receiver ROHDE & SCHWARZ Line-Impedance Stabilization Network
(for EUT) SCHWARZBECK Line-Impedance Stabilization Network
(for Peripheral) RF Cable
(JYEBAO) 50 ohms Terminator 50 ohms Terminator Software ADT Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL ESCS 30 100375 Apr. 29, 2014 Apr. 28, 2015 NSLK8127 8127-522 Sep. 12, 2013 Sep. 11, 2014 ENV216 100071 Nov. 13, 2013 Nov. 12, 2014 5DFB COCCAB-001 Mar. 10 , 2014 Mar. 09, 2015 N/A N/A BV ADT_Cond_V7.3.7. 3 EMC-03 EMC-02 Sep. 24, 2013 Sep. 23, 2014 Oct. 01, 2013 Sep. 30, 2014 NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. C. 3 The VCCI Con C Registration No. is C-3611. 4 Tested Date: June 27, 2014 Report No.: RF140606E01-1 19 of 97 Report Format Version 5.3.0 4.1.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. b. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. c. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. d. The frequency range from 150kHz to 30MHz was searched. Emission level under (Limit 20dB) was not recorded. NOTE:
1. The resolution bandwidth of test receiver is 9kHz for Quasi-peak detection (QP) & Average detection (AV). 4.1.4 DEVIATION FROM TEST STANDARD No deviation 4.1.5 TEST SETUP For the actual test configuration, please refer to the related item Photographs of the Test Configuration. Report No.: RF140606E01-1 20 of 97 Report Format Version 5.3.0 4.1.6 EUT OPERATING CONDITIONS 1. Connect the EUT with the support unit A (PC) which is placed on a testing table. 2. The communication partner run test program DutApiMimoBtFmBrdigeUart.exe
[WIN-X86-2.1.0.44-14.2.201.p98] to enable EUT under transmission/receiving condition continuously at specific channel frequency. Report No.: RF140606E01-1 21 of 97 Report Format Version 5.3.0 4.1.7 TEST RESULTS PHASE No 1 2 3 4 5 6 Freq.
[MHz]
0.22031 0.36484 2.19531 4.97266 11.13281 20.24609 REMARKS:
Line (L) DETECTOR FUNCTION Quasi-Peak (QP) /
Average (AV) Emission Level
[dB (uV)]
Reading Value
[dB (uV)]
Corr. Factor
(dB) Q.P. AV. Q.P. 0.07 25.83 28.96 0.09 27.02 0.18 20.74 0.29 0.48 26.15 24.68 0.72 25.76 19.06 28.87 26.94 26.84 19.18 20.45 6.81 25.67 18.99 23.96 18.48 Limit
[dB (uV)]
Margin
(dB) AV. Q.P. 19.13 62.81 58.62 27.03 56.00 19.36 56.00 7.10 19.47 60.00 60.00 19.20 AV. Q.P. AV. 52.81
-33.68
-21.59 48.62
-26.64 46.00
-38.90 46.00 50.00
-30.53
-30.80 50.00
-36.98
-29.66
-28.98
-35.26
-33.85
-35.32 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF140606E01-1 22 of 97 Report Format Version 5.3.0 PHASE Neutral (N) DETECTOR FUNCTION Quasi-Peak (QP) /
Average (AV) Emission Level
[dB (uV)]
Reading Value
[dB (uV)]
Corr. Factor
(dB) Q.P. AV. Q.P. 24.92 0.07 26.95 0.09 26.25 0.19 0.29 20.40 24.78 0.49 0.70 23.21 24.85 20.03 26.86 24.90 26.06 18.61 20.11 8.81 24.29 16.99 22.51 16.80 Limit
[dB (uV)]
Margin
(dB) AV. Q.P. 62.66 20.10 58.62 24.99 56.00 18.80 9.10 56.00 60.00 17.48 17.50 60.00 AV. Q.P. AV.
-32.56 52.66
-23.63 48.62
-27.20 46.00 46.00
-36.90
-32.52 50.00 50.00
-32.50
-37.74
-31.67
-29.75
-35.60
-35.22
-36.79 No 1 2 3 4 5 6 Freq.
[MHz]
0.22422 0.36484 2.19141 4.97266 11.45313 19.85156 REMARKS:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission Level Limit value 4. Correction Factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value Report No.: RF140606E01-1 23 of 97 Report Format Version 5.3.0 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table:
Frequencies
(MHz) Field strength
(microvolts/meter) Measurement distance
(meters) 0.009-0.490 0.490-1.705 1.705-30.0 30-88 88-216 216-960 Above 960 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 300 30 30 3 3 3 3 NOTE:
1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF140606E01-1 24 of 97 Report Format Version 5.3.0 4.2.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS APPLICABLE TO LIMIT 789033 D02 General UNII Test Procedures New Rules v01 FIELD STRENGTH AT 3m PK:74 (dBV/m) AV:54 (dBV/m) APPLICABLE TO EIRP LIMIT EQUIVALENT FIELD STRENGTH AT 3m 15.407(b)(1) 15.407(b)(2) 15.407(b)(3) 15.407(b)(4) PK:-27 (dBm/MHz) PK:68.2(dBV/m) PK:-27 (dBm/MHz) *1 PK:-17 (dBm/MHz) *2 PK: 68.2(dBV/m) *1 PK:78.2 (dBV/m) *2 NOTE: *1 beyond 10MHz of the band edge *2 within 10 MHz of band edge The following formula is used to convert the equipment isotropic radiated power (eirp) to field strength:
E =
30 P 1000000 3 V/m, where P is the eirp (Watts). Report No.: RF140606E01-1 25 of 97 Report Format Version 5.3.0 4.2.3 TEST INSTRUMENTS For Below 1GHz test:
DESCRIPTION &
MANUFACTURER MXE EMI Receiver Agilent Pre-Amplifier Mini-Circuits Trilog Broadband Antenna SCHWARZBECK RF Cable Spectrum Analyzer R&S Horn_Antenna AISI Pre-Amplifier Agilent MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL N9038A MY50010156 Jan. 15, 2014 Jan. 14, 2015 ZFL-1000VH2 B AMP-ZFL-04 Nov. 13, 2013 Nov. 12, 2014 VULB 9168 9168-361 Feb. 27, 2014 Feb. 26, 2015 NA FSV40 CHHCAB_001 Oct. 06, 2013 Oct. 05, 2014 100964 July 15, 2013 July 14, 2014 AIH.8018 0000220091110 Dec. 06, 2013 Dec. 05, 2014 8449B 3008A01923 Oct. 29, 2013 Oct. 28, 2014 RF Cable NA RF104-205 RF104-207 RF104-202 Dec. 12, 2013 Dec. 11, 2014 Spectrum Analyzer Agilent Pre-Amplifier SPACEK LABS Horn_Antenna SCHWARZBECK Software Antenna Tower & Turn Table CT Note:
NA E4446A MY48250253 Aug. 28, 2013 Aug. 27, 2014 SLKKa-48-6 9K16 Nov. 13, 2013 Nov. 12, 2014 BBHA 9170 9170-424 Oct. 08, 2013 Oct. 07, 2014 ADT_Radiated _V8.7.07 NA NA NA NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3 The test was performed in 966 Chamber No. H. 4. The FCC Site Registration No. is 797305. 5 The CANADA Site Registration No. is IC 7450H-3. 6 Tested Date: June 18, 2014 Report No.: RF140606E01-1 26 of 97 Report Format Version 5.3.0 For Above 1GHz test:
DESCRIPTION &
MANUFACTURER MXE EMI Receiver Agilent Pre-Amplifier Mini-Circuits Trilog Broadband Antenna SCHWARZBECK RF Cable Spectrum Analyzer R&S Horn_Antenna AISI Pre-Amplifier Agilent MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL N9038A MY51210105 Jan. 21,2014 Jan. 20,2015 ZFL-1000VH2 B AMP-ZFL-03 Nov. 13, 2013 Nov. 12, 2014 VULB 9168 9168-360 Feb. 26, 2014 Feb. 25, 2015 NA FSV40 CHGCAB_001 Oct. 05, 2013 Oct. 04, 2014 100964 July 15, 2013 July 14, 2014 AIH.8018 0000320091110 Nov. 18, 2013 Nov. 17, 2014 8449B 3008A01923 Oct. 29, 2013 Oct. 28, 2014 RF Cable NA RF104-201 RF104-203 RF104-204 Dec. 12, 2013 Dec. 11, 2014 Spectrum Analyzer Agilent Pre-Amplifier SPACEK LABS Horn_Antenna SCHWARZBECK Software Antenna Tower & Turn Table CT Note:
NA E4446A MY48250253 Aug. 28, 2013 Aug. 27, 2014 SLKKa-48-6 9K16 Nov. 13, 2013 Nov. 12, 2014 BBHA 9170 9170-424 Oct. 08, 2013 Oct. 07, 2014 ADT_Radiated _V8.7.07 NA NA NA NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3 The test was performed in 966 Chamber No. G. 4. The FCC Site Registration No. is 966073. 5 The VCCI Site Registration No. is G-137. 6 The CANADA Site Registration No. is IC 7450H-2. 7 Tested Date: June 28, 2014 Report No.: RF140606E01-1 27 of 97 Report Format Version 5.3.0 4.2.4 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 3MHz for RMS Average (Duty cycle < 98%) for Average detection (AV) at frequency above 1GHz, then the measurement results was added to a correction factor (10 log(1/duty cycle)). 4. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 10Hz (Duty cycle 98%) for Average detection (AV) at frequency above 1GHz. 5. All modes of operation were investigated and the worst-case emissions are reported. 4.2.5 DEVIATION FROM TEST STANDARD No deviation Report No.: RF140606E01-1 28 of 97 Report Format Version 5.3.0 4.2.6 TEST SETUP
<Frequency Range below 1GHz>
EUT&
Support Units 80cm 3m 10m Turn Table Ground Plane Test Receiver Ant. Tower 1-4m Variable
<Frequency Range above 1GHz>
EUT&
Support Units 3m Ant. Tower 1-4m Variable Turn Table Absorber 80cm Ground Plane Test Receiver For the actual test configuration, please refer to the related item Photographs of the Test Configuration. 4.2.7 EUT OPERATING CONDITION Same as 4.1.6 Report No.: RF140606E01-1 29 of 97 Report Format Version 5.3.0 4.2.8 TEST RESULTS BELOW 1GHz WORST-CASE DATA 802.11a CHANNEL TX Channel 157 FREQUENCY RANGE Below 1GHz DETECTOR FUNCTION Quasi-Peak (QP)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT 216 120 148 120 214 20 TABLE ANGLE
(Degree) 43.5 43.5 43.5 46.0 46.0 46.0
-10.7
-3.0
-3.2
-3.1
-6.0
-10.7
(m) 1.55 H 1.93 H 1.53 H 1.00 H 1.00 H 1.93 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 32.8 QP 47.78 40.5 QP 54.37 40.3 QP 53.57 42.9 QP 56.38 40.0 QP 51.02 35.3 QP 45.00 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 53.81 49.27 53.73 56.44 48.22 47.76 LEVEL
(dBuV/m) 40.0 QP 36.4 QP 40.4 QP 43.0 QP 35.5 QP 36.8 QP
(m) 1.00 V 1.05 V 1.95 V 1.53 V 2.00 V 1.53 V
-3.5
-7.1
-3.1
-3.0
-10.5
-9.2 43.5 43.5 43.5 46.0 46.0 46.0 TABLE ANGLE
(Degree) 302 287 108 360 40 241 ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m)
-14.97
-13.87
-13.26
-13.44
-11.00
-9.69 CORRECTION FACTOR
(dB/m)
-13.85
-12.90
-13.35
-13.44
-12.73
-11.00 NO. 1 2 3 4 5 6 FREQ.
(MHz) 120.43 133.51 165.70 266.69 334.11 400.33 NO. FREQ.
(MHz) 1 2 3 4 5 6 133.74 156.76 166.74 266.60 282.50 332.38 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value Report No.: RF140606E01-1 30 of 97 Report Format Version 5.3.0 ABOVE 1GHz DATA 802.11a CHANNEL TX Channel 36 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-5.7
-3.4 MARGIN 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-21.3
-13.4
-14.6
-6.2 TABLE ANGLE
(Degree) 233 233 233 233 24 24 13 13
(m) 1.21 H 1.21 H 1.21 H 1.21 H 1.22 H 1.22 H 1.23 H 1.23 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 68.3 PK 61.50 50.6 AV 43.80 104.7 PK 97.75 95.8 AV 88.85 52.7 PK 39.59 40.6 AV 27.49 59.4 PK 40.71 47.8 AV 29.11 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 60.70 46.40 101.85 92.55 40.49 31.59 44.31 31.21 LEVEL
(dBuV/m) 67.5 PK 53.2 AV 108.8 PK 99.5 AV 53.6 PK 44.7 AV 63.0 PK 49.9 AV
(m) 1.29 V 1.29 V 1.29 V 1.29 V 1.24 V 1.24 V 1.38 V 1.38 V 272 272 272 272 298 298 285 285 TABLE ANGLE
(Degree)
-20.4
-9.3
-11.0
-4.1 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 MARGIN
-6.5
-0.8
(dB) CORRECTION FACTOR
(dB/m) 6.80 6.80 6.95 6.95 13.11 13.11 18.69 18.69 CORRECTION FACTOR
(dB/m) 6.80 6.80 6.95 6.95 13.11 13.11 18.69 18.69 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5150.00 5150.00
*5180.00
*5180.00
#10360.00
#10360.00 15540.00 15540.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5150.00 5150.00
*5180.00
*5180.00
#10360.00
#10360.00 15540.00 15540.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 31 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 40 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-21.0
-13.4
-14.5
-6.1 232 232 10 10 28 28 TABLE ANGLE
(Degree)
(m) 1.17 H 1.17 H 1.25 H 1.25 H 1.28 H 1.28 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 106.4 PK 99.35 97.3 AV 90.25 53.0 PK 39.78 40.6 AV 27.38 59.5 PK 40.80 47.9 AV 29.20 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 102.35 93.15 39.78 31.18 44.40 31.20 LEVEL
(dBuV/m) 109.4 PK 100.2 AV 53.0 PK 44.4 AV 63.1 PK 49.9 AV
(m) 1.30 V 1.30 V 1.22 V 1.22 V 1.37 V 1.37 V TABLE ANGLE
(Degree) 278 278 288 288 299 299
-21.0
-9.6
-10.9
-4.1 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 7.05 7.05 13.22 13.22 18.70 18.70 CORRECTION FACTOR
(dB/m) 7.05 7.05 13.22 13.22 18.70 18.70 NO. FREQ.
(MHz) 1 2 3 4 5 6
*5200.00
*5200.00
#10400.00
#10400.00 15600.00 15600.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*5200.00
*5200.00
#10400.00
#10400.00 15600.00 15600.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 32 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 48 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-21.1
-12.9
-14.8
-6.5 237 237 27 27 18 18 TABLE ANGLE
(Degree)
(m) 1.21 H 1.21 H 1.17 H 1.17 H 1.17 H 1.17 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 104.5 PK 97.34 95.9 AV 88.74 52.9 PK 39.74 41.1 AV 27.94 59.2 PK 40.80 47.5 AV 29.10 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 101.54 92.64 40.54 31.34 45.00 31.70 LEVEL
(dBuV/m) 108.7 PK 99.8 AV 53.7 PK 44.5 AV 63.4 PK 50.1 AV
(m) 1.29 V 1.29 V 1.28 V 1.28 V 1.36 V 1.36 V TABLE ANGLE
(Degree) 284 284 288 288 283 283
-20.3
-9.5
-10.6
-3.9 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 7.16 7.16 13.16 13.16 18.40 18.40 CORRECTION FACTOR
(dB/m) 7.16 7.16 13.16 13.16 18.40 18.40 NO. FREQ.
(MHz) 1 2 3 4 5 6
*5240.00
*5240.00
#10480.00
#10480.00 15720.00 15720.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*5240.00
*5240.00
#10480.00
#10480.00 15720.00 15720.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 33 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 52 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-21.0
-13.4
-14.6
-6.2 239 239 13 13 0 0 TABLE ANGLE
(Degree)
(m) 1.25 H 1.25 H 1.26 H 1.26 H 1.23 H 1.23 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 105.1 PK 97.92 96.2 AV 89.02 53.0 PK 39.78 40.6 AV 27.38 59.4 PK 40.89 47.8 AV 29.29 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 97.92 101.82 89.02 92.62 39.78 40.08 27.38 31.28 40.89 45.19 29.29 31.79 LEVEL
(dBuV/m) 105.1 PK 109.0 PK 96.2 AV 99.8 AV 53.0 PK 53.3 PK 40.6 AV 44.5 AV 59.4 PK 63.7 PK 47.8 AV 50.3 AV
(m) 1.25 V 1.28 V 1.25 V 1.28 V 1.26 V 1.20 V 1.26 V 1.20 V 1.23 V 1.34 V 1.23 V 1.34 V 239 265 239 265 13 291 13 291 0 278 0 278
-21.0
-20.7
-13.4
-9.5
-14.6
-10.3
-6.2
-3.7 74.0 74.0 54.0 54.0 74.0 74.0 54.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 7.18 7.18 13.22 13.22 18.51 18.51 CORRECTION FACTOR
(dB/m) 7.18 7.18 7.18 7.18 13.22 13.22 13.22 13.22 18.51 18.51 18.51 18.51 NO. FREQ.
(MHz) 1 2 3 4 5 6
*5260.00
*5260.00
#10520.00
#10520.00 15780.00 15780.00 NO. FREQ.
(MHz) 1
*5260.00 2
*5260.00 3
*5260.00 4
*5260.00 5
#10520.00 6
#10520.00 7
#10520.00 8
#10520.00 9 15780.00 10 15780.00 11 15780.00 12 15780.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 34 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 60 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-21.1
-13.5
-14.6
-6.4 233 233 19 19 28 28 TABLE ANGLE
(Degree)
(m) 1.21 H 1.21 H 1.20 H 1.20 H 1.29 H 1.29 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 106.5 PK 99.21 97.5 AV 90.21 52.9 PK 39.37 40.5 AV 26.97 59.4 PK 40.75 47.6 AV 28.95 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 102.21 92.81 40.07 31.37 44.25 30.95 LEVEL
(dBuV/m) 109.5 PK 100.1 AV 53.6 PK 44.9 AV 62.9 PK 49.6 AV
(m) 1.31 V 1.31 V 1.20 V 1.20 V 1.43 V 1.43 V TABLE ANGLE
(Degree) 256 256 284 284 290 290
-20.4
-9.1
-11.1
-4.4 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 7.29 7.29 13.53 13.53 18.65 18.65 CORRECTION FACTOR
(dB/m) 7.29 7.29 13.53 13.53 18.65 18.65 NO. FREQ.
(MHz) 1 2 3 4 5 6
*5300.00
*5300.00 10600.00 10600.00 15900.00 15900.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*5300.00
*5300.00 10600.00 10600.00 15900.00 15900.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01-1 35 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 64 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-7.6
-3.7
-20.8
-13.0
-15.1
-6.7 245 245 245 245 15 15 3 3
(m) 1.16 H 1.16 H 1.16 H 1.16 H 1.22 H 1.22 H 1.27 H 1.27 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 103.4 PK 96.02 94.3 AV 86.92 66.4 PK 58.91 50.3 AV 42.81 53.2 PK 39.57 41.0 AV 27.37 58.9 PK 40.29 47.3 AV 28.69 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 99.02 90.82 61.01 44.81 40.27 31.47 44.69 31.69 LEVEL
(dBuV/m) 106.4 PK 98.2 AV 68.5 PK 52.3 AV 53.9 PK 45.1 AV 63.3 PK 50.3 AV
(m) 1.00 V 1.00 V 1.00 V 1.00 V 1.20 V 1.20 V 1.36 V 1.36 V 272 272 272 272 296 296 294 294
-5.5
-1.7
-20.1
-8.9
-10.7
-3.7 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 7.38 7.38 7.49 7.49 13.63 13.63 18.61 18.61 CORRECTION FACTOR
(dB/m) 7.38 7.38 7.49 7.49 13.63 13.63 18.61 18.61 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*5320.00
*5320.00 5350.00 5350.00 10640.00 10640.00 15960.00 15960.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*5320.00
*5320.00 5350.00 5350.00 10640.00 10640.00 15960.00 15960.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01-1 36 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 100 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-5.8
-2.8 MARGIN 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-20.5
-12.5
-15.2
-6.6 TABLE ANGLE
(Degree) 246 246 246 246 29 29 10 10
(m) 1.17 H 1.17 H 1.17 H 1.17 H 1.22 H 1.22 H 1.28 H 1.28 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 68.2 PK 60.27 51.2 AV 43.27 102.7 PK 94.68 93.2 AV 85.18 53.5 PK 39.08 41.5 AV 27.08 58.8 PK 37.86 47.4 AV 26.46 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 62.07 45.77 98.58 89.48 37.88 29.58 40.36 27.66 LEVEL
(dBuV/m) 70.0 PK 53.7 AV 106.6 PK 97.5 AV 52.3 PK 44.0 AV 61.3 PK 48.6 AV
(m) 1.29 V 1.29 V 1.29 V 1.29 V 1.26 V 1.26 V 1.36 V 1.36 V 302 302 297 297 308 308 289 289 TABLE ANGLE
(Degree)
-21.7
-10.0
-12.7
-5.4 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 MARGIN
-4.0
-0.3
(dB) CORRECTION FACTOR
(dB/m) 7.93 7.93 8.02 8.02 14.42 14.42 20.94 20.94 CORRECTION FACTOR
(dB/m) 7.93 7.93 8.02 8.02 14.42 14.42 20.94 20.94 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
#5470.00
#5470.00
*5500.00
*5500.00 11000.00 11000.00
#16500.00
#16500.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
#5470.00
#5470.00
*5500.00
*5500.00 11000.00 11000.00
#16500.00
#16500.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 37 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 120 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0
-22.7
-14.8 LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-24.7
-14.2
-21.4
-13.5
-14.3
-6.2 222 222 222 222 222 222 17 17 38 38
(m) 1.22 H 1.22 H 1.22 H 1.22 H 1.22 H 1.22 H 1.23 H 1.23 H 1.31 H 1.31 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 51.3 PK 43.37 39.2 AV 31.27 106.0 PK 97.79 97.1 AV 88.89 49.3 PK 40.91 39.8 AV 31.41 52.6 PK 38.34 40.5 AV 26.24 59.7 PK 38.40 47.8 AV 26.50 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 45.17 32.97 100.79 92.49 43.31 33.31 39.34 30.54 42.30 29.10 LEVEL
(dBuV/m) 53.1 PK 40.9 AV 109.0 PK 100.7 AV 51.7 PK 41.7 AV 53.6 PK 44.8 AV 63.6 PK 50.4 AV
(m) 1.00 V 1.00 V 1.00 V 1.00 V 1.00 V 1.00 V 1.23 V 1.23 V 1.39 V 1.39 V 357 357 357 357 357 357 308 308 280 280
-22.3
-12.3
-20.4
-9.2
-10.4
-3.6 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m)
-20.9
-13.1 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 7.93 7.93 8.21 8.21 8.39 8.39 14.26 14.26 21.30 21.30 CORRECTION FACTOR
(dB/m) 7.93 7.93 8.21 8.21 8.39 8.39 14.26 14.26 21.30 21.30 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9 10
#5470.00
#5470.00
*5600.00
*5600.00
#5725.00
#5725.00 11200.00 11200.00
#16800.00
#16800.00 NO. FREQ.
(MHz)
#5470.00
#5470.00
*5600.00
*5600.00
#5725.00
#5725.00 11200.00 11200.00
#16800.00
#16800.00 1 2 3 4 5 6 7 8 9 10 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 38 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 140 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-5.2
-2.3
-20.5
-12.5
-15.1
-6.3 246 246 246 246 37 37 16 16
(m) 1.20 H 1.20 H 1.20 H 1.20 H 1.22 H 1.22 H 1.27 H 1.27 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 102.7 PK 94.35 93.5 AV 85.15 68.8 PK 60.41 51.7 AV 43.31 53.5 PK 39.08 41.5 AV 27.08 58.9 PK 37.13 47.7 AV 25.93 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 98.55 89.15 62.41 42.11 38.38 29.98 39.33 26.93 LEVEL
(dBuV/m) 106.9 PK 97.5 AV 70.8 PK 50.5 AV 52.8 PK 44.4 AV 61.1 PK 48.7 AV
(m) 1.26 V 1.26 V 1.26 V 1.26 V 1.25 V 1.25 V 1.41 V 1.41 V 279 279 279 279 304 304 293 293
-3.2
-3.5
-21.2
-9.6
-12.9
-5.3 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 8.35 8.35 8.39 8.39 14.42 14.42 21.77 21.77 CORRECTION FACTOR
(dB/m) 8.35 8.35 8.39 8.39 14.42 14.42 21.77 21.77 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*5700.00
*5700.00
#5725.00
#5725.00 11400.00 11400.00
#17100.00
#17100.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*5700.00
*5700.00
#5725.00
#5725.00 11400.00 11400.00
#17100.00
#17100.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 39 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 149 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN
-6.7
-3.7
-2.8 74.0 54.0 78.2 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-23.8
-13.9
-15.2
-7.0 TABLE ANGLE
(Degree) 236 236 236 236 236 11 11 0 0
(m) 1.21 H 1.21 H 1.21 H 1.21 H 1.21 H 1.24 H 1.24 H 1.29 H 1.29 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 67.3 PK 58.93 50.3 AV 41.93 75.4 PK 67.01 103.5 PK 95.08 95.3 AV 86.88 50.2 PK 35.85 40.1 AV 25.75 58.8 PK 36.36 47.0 AV 24.56 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 61.33 43.63 69.01 100.28 90.78 38.75 28.35 40.96 27.76 LEVEL
(dBuV/m) 69.7 PK 52.0 AV 77.4 PK 108.7 PK 99.2 AV 53.1 PK 42.7 AV 63.4 PK 50.2 AV
(m) 1.28 V 1.28 V 1.18 V 1.26 V 1.26 V 1.30 V 1.30 V 1.38 V 1.38 V 288 288 262 266 266 300 300 277 277 TABLE ANGLE
(Degree)
-20.9
-11.3
-10.6
-3.8 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 78.2
-4.3
-2.0
-0.8 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 8.37 8.37 8.39 8.42 8.42 14.35 14.35 22.44 22.44 CORRECTION FACTOR
(dB/m) 8.37 8.37 8.39 8.42 8.42 14.35 14.35 22.44 22.44 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
#5715.00
#5715.00
#5722.80
*5745.00
*5745.00 11490.00 11490.00
#17235.00
#17235.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
#5715.00
#5715.00
#5722.80
*5745.00
*5745.00 11490.00 11490.00
#17235.00
#17235.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 40 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 157 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-24.2
-14.0
-15.7
-7.4 233 233 18 18 0 0 TABLE ANGLE
(Degree)
(m) 1.14 H 1.14 H 1.20 H 1.20 H 1.23 H 1.23 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 103.4 PK 94.91 95.3 AV 86.81 49.8 PK 35.49 40.0 AV 25.69 58.3 PK 35.30 46.6 AV 23.60 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 100.81 92.11 38.89 28.69 40.90 27.40 LEVEL
(dBuV/m) 109.3 PK 100.6 AV 53.2 PK 43.0 AV 63.9 PK 50.4 AV
(m) 1.28 V 1.28 V 1.27 V 1.27 V 1.32 V 1.32 V TABLE ANGLE
(Degree) 262 262 311 311 263 263
-20.8
-11.0
-10.1
-3.6 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 8.49 8.49 14.31 14.31 23.00 23.00 CORRECTION FACTOR
(dB/m) 8.49 8.49 14.31 14.31 23.00 23.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*5785.00
*5785.00 11570.00 11570.00
#17355.00
#17355.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*5785.00
*5785.00 11570.00 11570.00
#17355.00
#17355.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 41 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 165 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 78.2 74.0 54.0 74.0 54.0 74.0 54.0 233 233 233 233 233 13 13 9 9
-8.0
-10.8
-12.2
-23.7
-15.6
-13.9
-6.4
(m) 1.18 H 1.18 H 1.18 H 1.18 H 1.18 H 1.18 H 1.18 H 1.19 H 1.19 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 101.3 PK 92.71 92.4 AV 83.81 70.2 PK 61.53 63.2 PK 54.49 41.8 AV 33.09 50.3 PK 35.92 38.4 AV 24.02 60.1 PK 36.80 47.6 AV 24.30 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 96.91 88.01 64.33 56.39 35.79 38.22 28.12 39.90 26.60 LEVEL
(dBuV/m) 105.5 PK 96.6 AV 73.0 PK 65.1 PK 44.5 AV 52.6 PK 42.5 AV 63.2 PK 49.9 AV
(m) 1.29 V 1.29 V 1.16 V 1.25 V 1.25 V 1.25 V 1.25 V 1.42 V 1.42 V
-5.2
-8.9
-9.5
-21.4
-11.5
-10.8
-4.1 262 262 360 360 360 293 293 281 281 78.2 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 8.59 8.59 8.67 8.71 8.71 14.38 14.38 23.30 23.30 CORRECTION FACTOR
(dB/m) 8.59 8.59 8.67 8.71 8.71 14.38 14.38 23.30 23.30 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
*5825.00
*5825.00
#5850.00
#5860.00
#5860.00 11650.00 11650.00
#17475.00
#17475.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
*5825.00
*5825.00
#5850.00
#5860.00
#5860.00 11650.00 11650.00
#17475.00
#17475.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 42 of 97 Report Format Version 5.3.0 802.11ac (VHT20) CHANNEL TX Channel 36 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-7.2
-3.5 MARGIN 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-20.3
-12.6
-14.6
-6.5 TABLE ANGLE
(Degree) 242 242 242 242 24 24 0 0
(m) 1.15 H 1.15 H 1.21 H 1.21 H 1.21 H 1.21 H 1.22 H 1.22 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 66.8 PK 60.00 50.5 AV 43.70 103.0 PK 96.05 94.1 AV 87.15 53.7 PK 40.59 41.4 AV 28.29 59.4 PK 40.71 47.5 AV 28.81 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 60.20 44.10 99.65 91.75 40.79 31.89 44.61 31.81 LEVEL
(dBuV/m) 67.0 PK 50.9 AV 106.6 PK 98.7 AV 53.9 PK 45.0 AV 63.3 PK 50.5 AV
(m) 1.00 V 1.00 V 1.00 V 1.00 V 1.22 V 1.22 V 1.31 V 1.31 V 265 265 265 265 280 280 282 282 TABLE ANGLE
(Degree)
-20.1
-9.0
-10.7
-3.5 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 MARGIN
-7.0
-3.1
(dB) CORRECTION FACTOR
(dB/m) 6.80 6.80 6.95 6.95 13.11 13.11 18.69 18.69 CORRECTION FACTOR
(dB/m) 6.80 6.80 6.95 6.95 13.11 13.11 18.69 18.69 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5150.00 5150.00
*5180.00
*5180.00
#10360.00
#10360.00 15540.00 15540.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5150.00 5150.00
*5180.00
*5180.00
#10360.00
#10360.00 15540.00 15540.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 43 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 40 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0
-16.7
-13.4 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-21.6
-13.4
-14.7
-6.4 TABLE ANGLE
(Degree) 216 216 216 216 15 15 30 30
(m) 1.23 H 1.23 H 1.23 H 1.23 H 1.21 H 1.21 H 1.27 H 1.27 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 57.3 PK 50.50 40.6 AV 33.80 106.1 PK 99.05 96.9 AV 89.85 52.4 PK 39.18 40.6 AV 27.38 59.3 PK 40.60 47.6 AV 28.90 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 52.70 35.50 100.95 93.65 40.28 31.48 44.80 31.80 LEVEL
(dBuV/m) 59.5 PK 42.3 AV 108.0 PK 100.7 AV 53.5 PK 44.7 AV 63.5 PK 50.5 AV
(m) 1.00 V 1.00 V 1.00 V 1.00 V 1.21 V 1.21 V 1.32 V 1.32 V 265 265 265 265 306 306 295 295 TABLE ANGLE
(Degree)
-20.5
-9.3
-10.5
-3.5 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m)
-14.5
-11.7 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 6.80 6.80 7.05 7.05 13.22 13.22 18.70 18.70 CORRECTION FACTOR
(dB/m) 6.80 6.80 7.05 7.05 13.22 13.22 18.70 18.70 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5150.00 5150.00
*5200.00
*5200.00
#10400.00
#10400.00 15600.00 15600.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5150.00 5150.00
*5200.00
*5200.00
#10400.00
#10400.00 15600.00 15600.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 44 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 48 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-21.6
-13.2
-14.7
-6.5 214 214 21 21 43 43 TABLE ANGLE
(Degree)
(m) 1.22 H 1.22 H 1.27 H 1.27 H 1.30 H 1.30 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 106.6 PK 99.44 97.2 AV 90.04 52.4 PK 39.24 40.8 AV 27.64 59.3 PK 40.90 47.5 AV 29.10 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 100.74 93.54 41.04 31.94 45.10 32.20 LEVEL
(dBuV/m) 107.9 PK 100.7 AV 54.2 PK 45.1 AV 63.5 PK 50.6 AV
(m) 1.10 V 1.10 V 1.24 V 1.24 V 1.34 V 1.34 V TABLE ANGLE
(Degree) 261 261 283 283 287 287
-19.8
-8.9
-10.5
-3.4 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 7.16 7.16 13.16 13.16 18.40 18.40 CORRECTION FACTOR
(dB/m) 7.16 7.16 13.16 13.16 18.40 18.40 NO. FREQ.
(MHz) 1 2 3 4 5 6
*5240.00
*5240.00
#10480.00
#10480.00 15720.00 15720.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*5240.00
*5240.00
#10480.00
#10480.00 15720.00 15720.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 45 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 52 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-21.3
-13.2
-14.7
-6.4 216 216 15 15 15 15 TABLE ANGLE
(Degree)
(m) 1.24 H 1.24 H 1.27 H 1.27 H 1.23 H 1.23 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 106.1 PK 98.92 97.2 AV 90.02 52.7 PK 39.48 40.8 AV 27.58 59.3 PK 40.79 47.6 AV 29.09 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 100.12 93.12 40.68 31.78 44.89 31.99 LEVEL
(dBuV/m) 107.3 PK 100.3 AV 53.9 PK 45.0 AV 63.4 PK 50.5 AV
(m) 1.06 V 1.06 V 1.16 V 1.16 V 1.37 V 1.37 V TABLE ANGLE
(Degree) 264 264 292 292 300 300
-20.1
-9.0
-10.6
-3.5 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 7.18 7.18 13.22 13.22 18.51 18.51 CORRECTION FACTOR
(dB/m) 7.18 7.18 13.22 13.22 18.51 18.51 NO. FREQ.
(MHz) 1 2 3 4 5 6
*5260.00
*5260.00
#10520.00
#10520.00 15780.00 15780.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*5260.00
*5260.00
#10520.00
#10520.00 15780.00 15780.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 46 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 60 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-21.7
-13.5
-14.6
-6.6 221 221 6 6 16 16 TABLE ANGLE
(Degree)
(m) 1.26 H 1.26 H 1.18 H 1.18 H 1.21 H 1.21 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 106.2 PK 98.91 97.3 AV 90.01 52.3 PK 38.77 40.5 AV 26.97 59.4 PK 40.75 47.4 AV 28.75 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 100.91 93.61 40.97 31.97 44.75 31.55 LEVEL
(dBuV/m) 108.2 PK 100.9 AV 54.5 PK 45.5 AV 63.4 PK 50.2 AV
(m) 1.05 V 1.05 V 1.16 V 1.16 V 1.34 V 1.34 V TABLE ANGLE
(Degree) 251 251 302 302 287 287
-19.5
-8.5
-10.6
-3.8 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 7.29 7.29 13.53 13.53 18.65 18.65 CORRECTION FACTOR
(dB/m) 7.29 7.29 13.53 13.53 18.65 18.65 NO. FREQ.
(MHz) 1 2 3 4 5 6
*5300.00
*5300.00 10600.00 10600.00 15900.00 15900.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*5300.00
*5300.00 10600.00 10600.00 15900.00 15900.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01-1 47 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 64 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-8.6
-2.9
-21.5
-13.6
-14.7
-6.5 222 222 222 222 7 7 24 24
(m) 1.19 H 1.19 H 1.19 H 1.19 H 1.24 H 1.24 H 1.28 H 1.28 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 105.7 PK 98.32 96.5 AV 89.12 65.4 PK 57.91 51.1 AV 43.61 52.5 PK 38.87 40.4 AV 26.77 59.3 PK 40.69 47.5 AV 28.89 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 100.02 92.82 60.21 45.61 40.07 31.17 44.79 31.99 LEVEL
(dBuV/m) 107.4 PK 100.2 AV 67.7 PK 53.1 AV 53.7 PK 44.8 AV 63.4 PK 50.6 AV
(m) 1.14 V 1.14 V 1.14 V 1.14 V 1.19 V 1.19 V 1.39 V 1.39 V 276 276 276 276 308 308 308 308
-6.3
-0.9
-20.3
-9.2
-10.6
-3.4 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 7.38 7.38 7.49 7.49 13.63 13.63 18.61 18.61 CORRECTION FACTOR
(dB/m) 7.38 7.38 7.49 7.49 13.63 13.63 18.61 18.61 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*5320.00
*5320.00 5350.00 5350.00 10640.00 10640.00 15960.00 15960.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*5320.00
*5320.00 5350.00 5350.00 10640.00 10640.00 15960.00 15960.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01-1 48 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 100 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-8.6
-4.7 MARGIN 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-20.2
-12.4
-12.8
-5.3 TABLE ANGLE
(Degree) 149 149 249 249 23 23 15 15
(m) 1.16 H 1.16 H 1.18 H 1.18 H 1.20 H 1.20 H 1.18 H 1.18 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 65.4 PK 57.47 49.3 AV 41.37 102.9 PK 94.88 94.1 AV 86.08 53.8 PK 39.38 41.6 AV 27.18 61.2 PK 40.26 48.7 AV 27.76 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 59.87 43.17 97.68 89.98 39.18 30.58 42.96 29.86 LEVEL
(dBuV/m) 67.8 PK 51.1 AV 105.7 PK 98.0 AV 53.6 PK 45.0 AV 63.9 PK 50.8 AV
(m) 1.02 V 1.02 V 1.02 V 1.02 V 1.23 V 1.23 V 1.35 V 1.35 V 346 346 346 346 299 299 303 303 TABLE ANGLE
(Degree)
-20.4
-9.0
-10.1
-3.2 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 MARGIN
-6.2
-2.9
(dB) CORRECTION FACTOR
(dB/m) 7.93 7.93 8.02 8.02 14.42 14.42 20.94 20.94 CORRECTION FACTOR
(dB/m) 7.93 7.93 8.02 8.02 14.42 14.42 20.94 20.94 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
#5470.00
#5470.00
*5500.00
*5500.00 11000.00 11000.00
#16500.00
#16500.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
#5470.00
#5470.00
*5500.00
*5500.00 11000.00 11000.00
#16500.00
#16500.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 49 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 120 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0
-23.9
-14.6 LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-28.7
-21.9
-22.3
-13.9
-14.5
-6.2 226 226 227 227 227 227 14 14 25 25
(m) 1.23 H 1.23 H 1.23 H 1.23 H 1.23 H 1.23 H 1.18 H 1.18 H 1.24 H 1.24 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 50.1 PK 42.17 39.4 AV 31.47 106.1 PK 97.89 96.6 AV 88.39 45.3 PK 36.91 32.1 AV 23.71 51.7 PK 37.44 40.1 AV 25.84 59.5 PK 38.20 47.8 AV 26.50 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 44.67 33.17 99.89 92.19 38.31 25.41 39.44 30.24 42.30 29.30 LEVEL
(dBuV/m) 52.6 PK 41.1 AV 108.1 PK 100.4 AV 46.7 PK 33.8 AV 53.7 PK 44.5 AV 63.6 PK 50.6 AV
(m) 1.00 V 1.00 V 1.00 V 1.00 V 1.00 V 1.00 V 1.18 V 1.18 V 1.43 V 1.43 V 356 356 356 356 356 356 296 296 300 300
-27.3
-20.2
-20.3
-9.5
-10.4
-3.4 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m)
-21.4
-12.9 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 7.93 7.93 8.21 8.21 8.39 8.39 14.26 14.26 21.30 21.30 CORRECTION FACTOR
(dB/m) 7.93 7.93 8.21 8.21 8.39 8.39 14.26 14.26 21.30 21.30 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9 10
#5470.00
#5470.00
*5600.00
*5600.00
#5725.00
#5725.00 11200.00 11200.00
#16800.00
#16800.00 NO. FREQ.
(MHz)
#5470.00
#5470.00
*5600.00
*5600.00
#5725.00
#5725.00 11200.00 11200.00
#16800.00
#16800.00 1 2 3 4 5 6 7 8 9 10 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 50 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 140 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-9.2
-5.4
-20.8
-12.8
-13.1
-5.4 249 249 249 249 8 8 7 7
(m) 1.22 H 1.22 H 1.22 H 1.22 H 1.19 H 1.19 H 1.19 H 1.19 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 102.6 PK 94.25 93.2 AV 84.85 64.8 PK 56.41 48.6 AV 40.21 53.2 PK 38.78 41.2 AV 26.78 60.9 PK 39.13 48.6 AV 26.83 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 96.85 89.25 58.01 41.61 38.58 30.18 42.13 29.23 LEVEL
(dBuV/m) 105.2 PK 97.6 AV 66.4 PK 50.0 AV 53.0 PK 44.6 AV 63.9 PK 51.0 AV
(m) 1.21 V 1.21 V 1.20 V 1.20 V 1.25 V 1.25 V 1.33 V 1.33 V 291 291 284 284 286 286 303 303
-7.6
-4.0
-21.0
-9.4
-10.1
-3.0 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 8.35 8.35 8.39 8.39 14.42 14.42 21.77 21.77 CORRECTION FACTOR
(dB/m) 8.35 8.35 8.39 8.39 14.42 14.42 21.77 21.77 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*5700.00
*5700.00
#5725.00
#5725.00 11400.00 11400.00
#17100.00
#17100.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*5700.00
*5700.00
#5725.00
#5725.00 11400.00 11400.00
#17100.00
#17100.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 51 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 149 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN
-8.7
-4.7
-2.8 74.0 54.0 78.2 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-24.1
-13.9
-15.2
-6.8 TABLE ANGLE
(Degree) 233 233 233 233 233 8 8 11 11
(m) 1.20 H 1.20 H 1.20 H 1.20 H 1.20 H 1.22 H 1.22 H 1.24 H 1.24 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 65.3 PK 56.93 49.3 AV 40.93 75.4 PK 67.01 103.2 PK 94.78 95.2 AV 86.78 49.9 PK 35.55 40.1 AV 25.75 58.8 PK 36.36 47.2 AV 24.76 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 59.43 43.13 69.41 98.88 90.08 38.15 27.95 39.86 26.76 LEVEL
(dBuV/m) 67.8 PK 51.5 AV 77.8 PK 107.3 PK 98.5 AV 52.5 PK 42.3 AV 62.3 PK 49.2 AV
(m) 1.18 V 1.18 V 1.17 V 1.18 V 1.18 V 1.36 V 1.36 V 1.35 V 1.35 V 268 268 260 260 260 296 296 263 263 TABLE ANGLE
(Degree)
-21.5
-11.7
-11.7
-4.8 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 78.2
-6.2
-2.5
-0.4 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 8.37 8.37 8.39 8.42 8.42 14.35 14.35 22.44 22.44 CORRECTION FACTOR
(dB/m) 8.37 8.37 8.39 8.42 8.42 14.35 14.35 22.44 22.44 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
#5715.00
#5715.00
#5725.00
*5745.00
*5745.00 11490.00 11490.00
#17235.00
#17235.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
#5715.00
#5715.00
#5725.00
*5745.00
*5745.00 11490.00 11490.00
#17235.00
#17235.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 52 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 157 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV) 78.2
(dB)
-16.6 MARGIN LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-24.4
-13.6
-16.2
-7.7 TABLE ANGLE
(Degree) 218 218 218 16 16 0 0
(m) 1.20 H 1.20 H 1.20 H 1.18 H 1.18 H 1.18 H 1.18 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 61.6 PK 53.21 103.3 PK 94.81 95.4 AV 86.91 49.6 PK 35.29 40.4 AV 26.09 57.8 PK 34.80 46.3 AV 23.30 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 54.81 100.71 91.61 38.19 28.49 41.00 27.50 LEVEL
(dBuV/m) 63.2 PK 109.2 PK 100.1 AV 52.5 PK 42.8 AV 64.0 PK 50.5 AV
(m) 1.17 V 1.17 V 1.17 V 1.30 V 1.30 V 1.31 V 1.31 V 258 258 258 321 321 279 279 TABLE ANGLE
(Degree)
-21.5
-11.2
-10.0
-3.5 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) MARGIN
-15.0
(dB) 78.2 CORRECTION FACTOR
(dB/m) 8.39 8.49 8.49 14.31 14.31 23.00 23.00 CORRECTION FACTOR
(dB/m) 8.39 8.49 8.49 14.31 14.31 23.00 23.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7
#5725.00
*5785.00
*5785.00 11570.00 11570.00
#17355.00
#17355.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7
#5725.00
*5785.00
*5785.00 11570.00 11570.00
#17355.00
#17355.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 53 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 165 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 78.2 74.0 54.0 74.0 54.0 74.0 54.0 248 248 243 242 242 12 12 15 15
-8.8
-9.7
-8.7
-24.4
-14.0
-15.0
-6.8
(m) 1.15 H 1.15 H 1.23 H 1.20 H 1.20 H 1.16 H 1.16 H 1.22 H 1.22 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 103.1 PK 94.51 95.3 AV 86.71 69.4 PK 60.73 64.3 PK 55.59 45.3 AV 36.59 49.6 PK 35.22 40.0 AV 25.62 59.0 PK 35.70 47.2 AV 23.90 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 98.11 89.81 64.83 57.59 39.49 37.82 27.92 39.90 26.80 LEVEL
(dBuV/m) 106.7 PK 98.4 AV 73.5 PK 66.3 PK 48.2 AV 52.2 PK 42.3 AV 63.2 PK 50.1 AV
(m) 1.29 V 1.29 V 1.29 V 1.28 V 1.28 V 1.32 V 1.32 V 1.41 V 1.41 V
-4.7
-7.7
-5.8
-21.8
-11.7
-10.8
-3.9 260 260 260 258 258 308 308 282 282 78.2 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 8.59 8.59 8.67 8.71 8.71 14.38 14.38 23.30 23.30 CORRECTION FACTOR
(dB/m) 8.59 8.59 8.67 8.71 8.71 14.38 14.38 23.30 23.30 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
*5825.00
*5825.00
#5850.00
#5860.00
#5860.00 11650.00 11650.00
#17475.00
#17475.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
*5825.00
*5825.00
#5850.00
#5860.00
#5860.00 11650.00 11650.00
#17475.00
#17475.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 54 of 97 Report Format Version 5.3.0 802.11ac (VHT40) CHANNEL TX Channel 38 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0
-12.2
-4.4 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-26.4
-15.8
-15.6
-7.7 TABLE ANGLE
(Degree) 266 266 266 266 9 9 12 12
(m) 1.29 H 1.29 H 1.29 H 1.29 H 1.18 H 1.18 H 1.17 H 1.17 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 61.8 PK 55.00 49.6 AV 42.80 97.2 PK 90.20 88.6 AV 81.60 47.6 PK 34.43 38.2 AV 25.03 58.4 PK 39.71 46.3 AV 27.61 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 56.70 44.80 94.10 85.50 37.23 28.13 41.61 29.41 LEVEL
(dBuV/m) 63.5 PK 51.6 AV 101.1 PK 92.5 AV 50.4 PK 41.3 AV 60.3 PK 48.1 AV
(m) 1.29 V 1.29 V 1.00 V 1.00 V 1.27 V 1.27 V 1.29 V 1.29 V 286 286 265 265 298 298 293 293 TABLE ANGLE
(Degree)
-23.6
-12.7
-13.7
-5.9 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m)
-10.5
-2.4 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 6.80 6.80 7.00 7.00 13.17 13.17 18.69 18.69 CORRECTION FACTOR
(dB/m) 6.80 6.80 7.00 7.00 13.17 13.17 18.69 18.69 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5150.00 5150.00
*5190.00
*5190.00
#10380.00
#10380.00 15570.00 15570.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5150.00 5150.00
*5190.00
*5190.00
#10380.00
#10380.00 15570.00 15570.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 55 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 46 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0
-15.7
-8.7 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-21.1
-13.2
-14.7
-6.4 TABLE ANGLE
(Degree) 257 257 257 257 18 18 18 18
(m) 1.23 H 1.23 H 1.23 H 1.23 H 1.20 H 1.20 H 1.21 H 1.21 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 58.3 PK 51.50 45.3 AV 38.50 101.5 PK 94.38 92.4 AV 85.28 52.9 PK 39.72 40.8 AV 27.62 59.3 PK 40.92 47.6 AV 29.22 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 55.00 40.10 97.88 89.58 38.22 29.82 43.52 30.82 LEVEL
(dBuV/m) 61.8 PK 46.9 AV 105.0 PK 96.7 AV 51.4 PK 43.0 AV 61.9 PK 49.2 AV
(m) 1.02 V 1.02 V 1.02 V 1.02 V 1.27 V 1.27 V 1.29 V 1.29 V 262 262 262 262 298 298 293 293 TABLE ANGLE
(Degree)
-22.6
-11.0
-12.1
-4.8 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m)
-12.2
-7.1 74.0 54.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 6.80 6.80 7.12 7.12 13.18 13.18 18.38 18.38 CORRECTION FACTOR
(dB/m) 6.80 6.80 7.12 7.12 13.18 13.18 18.38 18.38 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5150.00 5150.00
*5230.00
*5230.00
#10460.00
#10460.00 15690.00 15690.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5150.00 5150.00
*5230.00
*5230.00
#10460.00
#10460.00 15690.00 15690.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 56 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 54 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-20.7
-13.7
-22.7
-13.4
-14.6
-6.4 250 250 250 250 15 15 7 7
(m) 1.14 H 1.14 H 1.14 H 1.14 H 1.23 H 1.23 H 1.20 H 1.20 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 100.1 PK 92.88 91.4 AV 84.18 53.3 PK 45.81 40.3 AV 32.81 51.3 PK 38.01 40.6 AV 27.31 59.4 PK 40.83 47.6 AV 29.03 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 97.18 88.08 48.61 34.91 37.51 29.41 43.33 30.63 LEVEL
(dBuV/m) 104.4 PK 95.3 AV 56.1 PK 42.4 AV 50.8 PK 42.7 AV 61.9 PK 49.2 AV
(m) 1.00 V 1.00 V 1.00 V 1.00 V 1.22 V 1.22 V 1.27 V 1.27 V 260 260 260 260 291 291 297 297
-17.9
-11.6
-23.2
-11.3
-12.1
-4.8 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 7.22 7.22 7.49 7.49 13.29 13.29 18.57 18.57 CORRECTION FACTOR
(dB/m) 7.22 7.22 7.49 7.49 13.29 13.29 18.57 18.57 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*5270.00
*5270.00 5350.00 5350.00
#10540.00
#10540.00 15810.00 15810.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*5270.00
*5270.00 5350.00 5350.00
#10540.00
#10540.00 15810.00 15810.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 57 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 62 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-7.5
-3.0
-25.7
-15.6
-14.9
-7.3 258 258 258 258 25 25 12 12
(m) 1.34 H 1.34 H 1.34 H 1.34 H 1.15 H 1.15 H 1.17 H 1.17 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 100.1 PK 92.77 89.6 AV 82.27 66.5 PK 59.01 51.0 AV 43.51 48.3 PK 34.71 38.4 AV 24.81 59.1 PK 40.46 46.7 AV 28.06 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 96.47 85.97 61.41 46.01 36.71 27.81 42.36 29.96 LEVEL
(dBuV/m) 103.8 PK 93.3 AV 68.9 PK 53.5 AV 50.3 PK 41.4 AV 61.0 PK 48.6 AV
(m) 1.00 V 1.00 V 1.23 V 1.23 V 1.28 V 1.28 V 1.29 V 1.29 V 279 279 43 43 290 290 291 291
-5.1
-0.5
-23.7
-12.6
-13.0
-5.4 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 7.33 7.33 7.49 7.49 13.59 13.59 18.64 18.64 CORRECTION FACTOR
(dB/m) 7.33 7.33 7.49 7.49 13.59 13.59 18.64 18.64 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*5310.00
*5310.00 5350.00 5350.00 10620.00 10620.00 15930.00 15930.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*5310.00
*5310.00 5350.00 5350.00 10620.00 10620.00 15930.00 15930.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. Report No.: RF140606E01-1 58 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 102 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-12.1
-4.1
-9.7
-3.9
-27.1
-16.7
-15.4
-7.3 TABLE ANGLE
(Degree) 258 258 258 258 258 258 9 9 26 26
(m) 1.26 H 1.26 H 1.26 H 1.26 H 1.26 H 1.26 H 1.22 H 1.22 H 1.22 H 1.22 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 61.9 PK 54.00 49.9 AV 42.00 64.3 PK 56.37 50.1 AV 42.17 96.6 PK 88.56 88.1 AV 80.06 46.9 PK 32.53 37.3 AV 22.93 58.6 PK 37.68 46.7 AV 25.78 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 57.90 43.90 58.77 44.57 93.46 84.46 35.93 27.03 39.08 27.08 LEVEL
(dBuV/m) 65.8 PK 51.8 AV 66.7 PK 52.5 AV 101.5 PK 92.5 AV 50.3 PK 41.4 AV 60.0 PK 48.0 AV
(m) 1.26 V 1.26 V 1.15 V 1.15 V 1.15 V 1.15 V 1.29 V 1.29 V 1.25 V 1.25 V 268 268 284 284 284 284 308 308 281 281 TABLE ANGLE
(Degree)
-23.7
-12.6
-14.0
-6.0 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m)
-8.2
-2.2
-7.3
-1.5 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 7.90 7.90 7.93 7.93 8.04 8.04 14.37 14.37 20.92 20.92 CORRECTION FACTOR
(dB/m) 7.90 7.90 7.93 7.93 8.04 8.04 14.37 14.37 20.92 20.92 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9 10 5460.00 5460.00
#5470.00
#5470.00
*5510.00
*5510.00 11020.00 11020.00
#16530.00
#16530.00 NO. FREQ.
(MHz) 5460.00 5460.00
#5470.00
#5470.00
*5510.00
*5510.00 11020.00 11020.00
#16530.00
#16530.00 1 2 3 4 5 6 7 8 9 10 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 59 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 118 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-22.1
-13.0
-14.9
-6.7 220 220 30 30 8 8 TABLE ANGLE
(Degree)
(m) 1.15 H 1.15 H 1.29 H 1.29 H 1.13 H 1.13 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 99.7 PK 91.51 91.2 AV 83.01 51.9 PK 37.65 41.0 AV 26.75 59.1 PK 37.89 47.3 AV 26.09 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 96.91 87.61 37.15 28.75 40.89 28.29 LEVEL
(dBuV/m) 105.1 PK 95.8 AV 51.4 PK 43.0 AV 62.1 PK 49.5 AV
(m) 1.26 V 1.26 V 1.19 V 1.19 V 1.22 V 1.22 V TABLE ANGLE
(Degree) 285 285 300 300 298 298
-22.6
-11.0
-11.9
-4.5 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 8.19 8.19 14.25 14.25 21.21 21.21 CORRECTION FACTOR
(dB/m) 8.19 8.19 14.25 14.25 21.21 21.21 NO. FREQ.
(MHz) 1 2 3 4 5 6
*5590.00
*5590.00 11180.00 11180.00
#16770.00
#16770.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*5590.00
*5590.00 11180.00 11180.00
#16770.00
#16770.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 60 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 134 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-9.2
-4.3
-26.6
-16.6
-13.7
-7.5 265 265 265 265 16 16 10 10
(m) 1.31 H 1.31 H 1.31 H 1.31 H 1.21 H 1.21 H 1.12 H 1.12 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 100.4 PK 92.09 89.8 AV 81.49 64.8 PK 56.41 49.7 AV 41.31 47.4 PK 33.08 37.4 AV 23.08 60.3 PK 38.77 46.5 AV 24.97 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 94.59 84.79 57.11 43.31 36.68 28.58 40.57 27.87 LEVEL
(dBuV/m) 102.9 PK 93.1 AV 65.5 PK 51.7 AV 51.0 PK 42.9 AV 62.1 PK 49.4 AV
(m) 1.13 V 1.13 V 1.45 V 1.45 V 1.20 V 1.20 V 1.20 V 1.20 V 273 273 277 277 289 289 287 287
-8.5
-2.3
-23.0
-11.1
-11.9
-4.6 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 8.31 8.31 8.39 8.39 14.32 14.32 21.53 21.53 CORRECTION FACTOR
(dB/m) 8.31 8.31 8.39 8.39 14.32 14.32 21.53 21.53 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*5670.00
*5670.00
#5725.00
#5725.00 11340.00 11340.00
#17010.00
#17010.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*5670.00
*5670.00
#5725.00
#5725.00 11340.00 11340.00
#17010.00
#17010.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 61 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 151 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN 74.0 54.0 78.2
-7.6
-3.6
-18.1 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-23.3
-15.0
-13.9
-6.8 TABLE ANGLE
(Degree) 230 230 222 220 220 10 10 12 12
(m) 1.16 H 1.16 H 1.18 H 1.16 H 1.16 H 1.06 H 1.06 H 1.11 H 1.11 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 66.4 PK 58.03 50.4 AV 42.03 60.1 PK 51.71 100.4 PK 91.96 91.8 AV 83.36 50.7 PK 36.36 39.0 AV 24.66 60.1 PK 37.42 47.2 AV 24.52 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 60.53 44.13 65.91 95.46 85.76 35.96 25.96 38.72 26.62 LEVEL
(dBuV/m) 68.9 PK 52.5 AV 74.3 PK 103.9 PK 94.2 AV 50.3 PK 40.3 AV 61.4 PK 49.3 AV
(m) 1.17 V 1.17 V 1.17 V 1.28 V 1.28 V 1.31 V 1.31 V 1.40 V 1.40 V 265 265 261 262 262 295 295 271 271 TABLE ANGLE
(Degree)
-23.7
-13.7
-12.6
-4.7 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 78.2
-5.1
-1.5
-3.9 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 8.37 8.37 8.39 8.44 8.44 14.34 14.34 22.68 22.68 CORRECTION FACTOR
(dB/m) 8.37 8.37 8.39 8.44 8.44 14.34 14.34 22.68 22.68 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
#5712.90
#5712.90
#5725.00
*5755.00
*5755.00 11510.00 11510.00
#17265.00
#17265.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
#5712.90
#5712.90
#5725.00
*5755.00
*5755.00 11510.00 11510.00
#17265.00
#17265.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 62 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 159 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 78.2 74.0 54.0 74.0 54.0 74.0 54.0 224 224 233 224 224 8 8 10 10
-12.8
-13.7
-6.4
-23.2
-14.8
-14.5
-6.9
(m) 1.15 H 1.15 H 1.23 H 1.15 H 1.15 H 1.09 H 1.09 H 1.11 H 1.11 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 101.4 PK 92.90 93.6 AV 85.10 65.4 PK 56.73 60.3 PK 51.59 47.6 AV 38.89 50.8 PK 36.50 39.2 AV 24.90 59.5 PK 36.47 47.1 AV 24.07 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 97.60 88.00 59.23 53.39 40.79 35.80 25.80 37.87 25.77 LEVEL
(dBuV/m) 106.1 PK 96.5 AV 67.9 PK 62.1 PK 49.5 AV 50.1 PK 40.1 AV 60.9 PK 48.8 AV
(m) 1.28 V 1.28 V 1.28 V 1.18 V 1.18 V 1.33 V 1.33 V 1.36 V 1.36 V
-10.3
-11.9
-4.5
-23.9
-13.9
-13.1
-5.2 260 260 260 257 257 283 283 273 273 78.2 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 8.50 8.50 8.67 8.71 8.71 14.30 14.30 23.03 23.03 CORRECTION FACTOR
(dB/m) 8.50 8.50 8.67 8.71 8.71 14.30 14.30 23.03 23.03 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
*5795.00
*5795.00
#5850.00
#5860.00
#5860.00 11590.00 11590.00
#17385.00
#17385.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9
*5795.00
*5795.00
#5850.00
#5860.00
#5860.00 11590.00 11590.00
#17385.00
#17385.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 63 of 97 Report Format Version 5.3.0 802.11ac (VHT80) CHANNEL TX Channel 42 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-7.5
-2.6 MARGIN 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-26.5
-16.7
-14.2
-7.6 TABLE ANGLE
(Degree) 260 260 260 260 15 15 12 12
(m) 1.31 H 1.31 H 1.31 H 1.31 H 1.17 H 1.17 H 1.11 H 1.11 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW LEVEL VALUE
(dBuV/m)
(dBuV) 66.5 PK 59.74 51.4 AV 44.64 91.4 PK 84.34 80.3 AV 73.24 47.5 PK 34.30 37.3 AV 24.10 59.8 PK 41.20 46.4 AV 27.80 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 61.34 46.24 88.04 78.34 35.10 27.40 41.70 28.60 LEVEL
(dBuV/m) 68.1 PK 53.0 AV 95.1 PK 85.4 AV 48.3 PK 40.6 AV 60.3 PK 47.2 AV
(m) 1.02 V 1.02 V 1.01 V 1.01 V 1.12 V 1.12 V 1.21 V 1.21 V 263 263 274 274 277 277 282 282 TABLE ANGLE
(Degree)
-25.7
-13.4
-13.7
-6.8 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 MARGIN
-5.9
-1.0
(dB) CORRECTION FACTOR
(dB/m) 6.76 6.76 7.06 7.06 13.20 13.20 18.60 18.60 CORRECTION FACTOR
(dB/m) 6.76 6.76 7.06 7.06 13.20 13.20 18.60 18.60 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5140.60 5140.60
*5210.00
*5210.00
#10420.00
#10420.00 15630.00 15630.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5140.60 5140.60
*5210.00
*5210.00
#10420.00
#10420.00 15630.00 15630.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 64 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 58 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-7.1
-3.2
-26.1
-16.3
-15.5
-8.4 253 253 253 253 25 25 4 4
(m) 1.35 H 1.35 H 1.35 H 1.35 H 1.19 H 1.19 H 1.16 H 1.16 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 91.3 PK 84.02 81.4 AV 74.12 66.9 PK 59.35 50.8 AV 43.25 47.9 PK 34.45 37.7 AV 24.25 58.5 PK 39.88 45.6 AV 26.98 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 87.82 79.02 61.75 45.15 35.05 27.15 41.48 28.48 LEVEL
(dBuV/m) 95.1 PK 86.3 AV 69.3 PK 52.7 AV 48.5 PK 40.6 AV 60.1 PK 47.1 AV
(m) 1.00 V 1.00 V 1.10 V 1.10 V 1.16 V 1.16 V 1.17 V 1.17 V 260 260 279 279 276 276 269 269
-4.7
-1.3
-25.5
-13.4
-13.9
-6.9 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 7.28 7.28 7.55 7.55 13.45 13.45 18.62 18.62 CORRECTION FACTOR
(dB/m) 7.28 7.28 7.55 7.55 13.45 13.45 18.62 18.62 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*5290.00
*5290.00 5360.70 5360.70
#10580.00
#10580.00 15870.00 15870.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*5290.00
*5290.00 5360.70 5360.70
#10580.00
#10580.00 15870.00 15870.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 65 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 106 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB)
-7.4
-3.6 MARGIN 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-26.7
-16.7
-14.6
-8.1 TABLE ANGLE
(Degree) 246 246 246 246 12 12 25 25
(m) 1.30 H 1.30 H 1.30 H 1.30 H 1.19 H 1.19 H 1.14 H 1.14 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 66.6 PK 58.70 50.4 AV 42.50 90.6 PK 82.52 80.3 AV 72.22 47.3 PK 33.00 37.3 AV 23.00 59.4 PK 38.50 45.9 AV 25.00 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 61.00 44.60 86.62 76.52 34.00 26.50 38.40 25.50 LEVEL
(dBuV/m) 68.9 PK 52.5 AV 94.7 PK 84.6 AV 48.3 PK 40.8 AV 59.3 PK 46.4 AV
(m) 1.02 V 1.02 V 1.00 V 1.00 V 1.16 V 1.16 V 1.23 V 1.23 V 347 347 348 348 285 285 297 297 TABLE ANGLE
(Degree)
-25.7
-13.2
-14.7
-7.6 ANTENNA HEIGHT 74.0 54.0 74.0 54.0 LIMIT
(dBuV/m) 74.0 54.0 MARGIN
-5.1
-1.5
(dB) CORRECTION FACTOR
(dB/m) 7.90 7.90 8.08 8.08 14.30 14.30 20.90 20.90 CORRECTION FACTOR
(dB/m) 7.90 7.90 8.08 8.08 14.30 14.30 20.90 20.90 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5458.70 5458.70
*5530.00
*5530.00 11060.00 11060.00
#16590.00
#16590.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 5458.70 5458.70
*5530.00
*5530.00 11060.00 11060.00
#16590.00
#16590.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 66 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 122 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-6.9
-4.3
-26.0
-16.2
-16.9
-9.5 246 246 246 246 19 19 15 15
(m) 1.31 H 1.31 H 1.31 H 1.31 H 1.14 H 1.14 H 1.20 H 1.20 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 96.3 PK 88.07 87.3 AV 79.07 67.1 PK 58.71 49.7 AV 41.31 48.0 PK 33.74 37.8 AV 23.54 57.1 PK 35.75 44.5 AV 23.15 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 92.47 82.67 61.91 44.11 33.14 25.64 39.05 25.85 LEVEL
(dBuV/m) 100.7 PK 90.9 AV 70.3 PK 52.5 AV 47.4 PK 39.9 AV 60.4 PK 47.2 AV
(m) 1.04 V 1.04 V 1.25 V 1.25 V 1.19 V 1.19 V 1.21 V 1.21 V 271 271 291 291 278 278 261 261
-3.7
-1.5
-26.6
-14.1
-13.6
-6.8 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) MARGIN
(dB) CORRECTION FACTOR
(dB/m) 8.23 8.23 8.39 8.39 14.26 14.26 21.35 21.35 CORRECTION FACTOR
(dB/m) 8.23 8.23 8.39 8.39 14.26 14.26 21.35 21.35 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*5610.00
*5610.00
#5725.00
#5725.00 11220.00 11220.00
#16830.00
#16830.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*5610.00
*5610.00
#5725.00
#5725.00 11220.00 11220.00
#16830.00
#16830.00 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 67 of 97 Report Format Version 5.3.0 CHANNEL TX Channel 155 FREQUENCY RANGE 1GHz ~ 40GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) MARGIN
-7.6
-3.8
-9.9 74.0 54.0 78.2 LIMIT
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 78.2 74.0 54.0 74.0 54.0 74.0 54.0
-13.9
-11.9
-8.6
-23.3
-15.1
-14.2
-7.1 224 224 236 212 212 212 212 212 10 10 24 24
(m) 1.16 H 1.16 H 1.19 H 1.19 H 1.19 H 1.19 H 1.19 H 1.19 H 1.03 H 1.03 H 1.09 H 1.09 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 66.4 PK 58.03 50.2 AV 41.83 68.3 PK 59.91 98.3 PK 89.83 89.1 AV 80.63 64.3 PK 55.63 62.1 PK 53.37 45.4 AV 36.67 50.7 PK 36.38 38.9 AV 24.58 59.8 PK 36.82 46.9 AV 23.92 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 58.03 44.33 61.81 94.33 85.23 57.73 56.17 38.67 35.68 25.88 37.72 25.82 LEVEL
(dBuV/m) 66.4 PK 52.7 AV 70.2 PK 102.8 PK 93.7 AV 66.4 PK 64.9 PK 47.4 AV 50.0 PK 40.2 AV 60.7 PK 48.8 AV
(m) 1.17 V 1.17 V 1.18 V 1.18 V 1.18 V 1.18 V 1.18 V 1.18 V 1.26 V 1.26 V 1.34 V 1.34 V 265 265 260 260 260 260 260 260 291 291 257 257
-11.8
-9.1
-6.6
-24.0
-13.8
-13.3
-5.2 78.2 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT LIMIT
(dBuV/m) 74.0 54.0 78.2
-7.6
-1.3
-8.0 MARGIN
(dB) CORRECTION FACTOR
(dB/m) 8.37 8.37 8.39 8.47 8.47 8.67 8.73 8.73 14.32 14.32 22.98 22.98 CORRECTION FACTOR
(dB/m) 8.37 8.37 8.39 8.47 8.47 8.67 8.73 8.73 14.32 14.32 22.98 22.98 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8 9 10 11 12
#5712.90
#5712.90
#5725.00
*5775.00
*5775.00
#5850.00
#5864.00
#5864.00 11550.00 11550.00
#17325.00
#17325.00 NO. FREQ.
(MHz)
#5712.90
#5712.90
#5725.00
*5775.00
*5775.00
#5850.00
#5864.00
#5864.00 11550.00 11550.00
#17325.00
#17325.00 1 2 3 4 5 6 7 8 9 10 11 12 REMARKS:
1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level Limit value 5. " * ": Fundamental frequency. 6. " # ": The radiated frequency is out of the restricted band. Report No.: RF140606E01-1 68 of 97 Report Format Version 5.3.0 4.3 TRANSMIT POWER MEASUREMENT 4.3.1 LIMITS OF TRANSMIT POWER MEASUREMENT Operation EUT Category Band LIMIT U-NII-1 U-NII-2A U-NII-2C U-NII-3 Outdoor Access Point 1 Watt (30 dBm)
(Max. e.i .r.p 125mW(21 dBm) at any elevation angle above 30 degrees as measured from the horizon) Fixed point-to-point Access Point Indoor Access Point Mobile and Portable client device 1 Watt (30 dBm) 1 Watt (30 dBm) 250mW (24 dBm)
---
---
---
250mW (24 dBm) or 11 dBm+10 log B*
250mW (24 dBm) or 11 dBm+10 log B*
1 Watt (30 dBm) Note: Where B is the 26dB emission bandwidth in MHz. Per KDB 662911 D01 Multiple Transmitter Output Method of conducted output power measurement on IEEE 802.11 devices, Array Gain = 0 dB (i.e., no array gain) for NANT 4;
Array Gain = 0 dB (i.e., no array gain) for channel widths 40 MHz for any NANT;
Array Gain = 5 log(NANT/NSS) dB or 3 dB, whichever is less for 20-MHz channel widths with NANT 5. For power measurements on all other devices: Array Gain = 10 log(NANT/NSS) dB. Report No.: RF140606E01-1 69 of 97 Report Format Version 5.3.0 4.3.2 TEST INSTRUMENTS FOR POWER OUTPUT MEASUREMENT DESCRIPTION &
MANUFACTURER Power meter Anritsu Power sensor Anritsu Note:
MODEL NO. ML2495A SERIAL NO. 1014008 CALIBRATED DATE Apr. 30, 2014 CALIBRATED UNTIL Apr. 29, 2015 MA2411B 0917122 Apr. 30, 2014 Apr. 29, 2015 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 02, 2014 FOR 26dB OCCUPIED BANDWIDTH DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
FSV 40 MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL 100964 July 15, 2013 July 14, 2014 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 02, 2014 4.3.3 TEST PROCEDURE FOR POWER OUTPUT MEASUREMENT Method PM is used to perform output power measurement, trigger and gating function of wide band power meter is enabled to measure max output power of TX on burst. Duty factor is not added to measured value. FOR 26dB OCCUPIED BANDWIDTH 1. Set RBW = approximately 1% of the emission bandwidth. 2. Set the VBW > RBW. 3. Detector = Peak. 4. Trace mode = max hold. 5. Measure the maximum width of the emission that is 26 dB down from the peak of the emission. Compare this with the RBW setting of the analyzer. Readjust RBW and repeat measurement as needed until the RBW/EBW ratio is approximately 1%. Report No.: RF140606E01-1 70 of 97 Report Format Version 5.3.0 4.3.4 DEVIATION FROM TEST STANDARD No deviation 4.3.5 TEST SETUP EUT Attenuator Power Meter Power Sensor FOR POWER OUTPUT MEASUREMENT FOR 26dB OCCUPIED BANDWIDTH 4.3.6 EUT OPERATING CONDITIONS The software provided by client to enable the EUT under transmission condition continuously at specific channel frequencies individually. SPECTRUM ANALYZER Attenuator EUT Report No.: RF140606E01-1 71 of 97 Report Format Version 5.3.0 4.3.7 TEST RESULTS 802.11a CHAN. 36 40 48 52 60 64 100 120 140 149 157 165 CHAN. FREQ.
(MHz) 5180 5200 5240 5260 5300 5320 5500 5600 5700 5745 5785 5825 AVERAGE POWER (dBm) CHAIN 1 CHAIN 0 14.15 14.15 13.93 13.96 14.08 14.21 14.07 14.13 14.21 14.11 14.14 14.17 14.11 14.01 13.68 14.16 12.76 12.63 14.21 14.38 14.32 14.62 14.32 14.21 TOTAL POWER
(mW) 52.004 49.606 51.949 51.409 52.126 52.064 50.94 49.397 37.203 53.779 56.013 53.403 TOTAL POWER
(dBm) 17.16 16.96 17.16 17.11 17.17 17.17 17.07 16.94 15.71 17.31 17.48 17.28 POWER LIMIT
(dBm) 24 24 24 24 24 23.99 24 24 23.97 30 30 30 PASS /
FAIL PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS 26dB OCCUPIED BANDWIDTH:
CHANNEL CHANNEL FREQUENCY (MHz) 36 40 48 52 60 64 100 120 140 5180 5200 5240 5260 5300 5320 5500 5600 5700 26dBc BANDWIDTH (MHz) CHAIN 0 21.20 22.52 21.57 20.25 20.23 19.92 24.16 22.52 20.26 CHAIN 1 23.11 23.22 23.19 25.94 26.03 24.06 22.27 24.18 19.84 Note: For U-NII-2A, U-NII-2C Band output power limitation is determined based on 26dBc bandwidth. Report No.: RF140606E01-1 72 of 97 Report Format Version 5.3.0 Power Limit = 11dBm + 10logB < U-NII-2A, U-NII-2C >
Channel Number Freq.(MHz) Min. B(MHz) 52 60 64 100 120 140 5260 5300 5320 5500 5600 5700 20.25 20.23 19.92 22.27 22.52 19.84 Determined Conducted Limit (dBm) 24.06 > 24 24.05 > 24 23.99 < 24 24.47 > 24 24.52 > 24 23.97 < 24 802.11a / Chain(1) : CH140 SPECTRUM PLOT OF WORST VALUE Report No.: RF140606E01-1 73 of 97 Report Format Version 5.3.0 CHAN. 802.11ac (VHT20) CHAN. FREQ.
(MHz) 5180 5200 5240 5260 5300 5320 5500 5600 5700 5745 5785 5825 36 40 48 52 60 64 100 120 140 149 157 165 AVERAGE POWER (dBm) CHAIN 0 CHAIN 1 14.15 14.12 14.03 14.08 14.03 14.07 14.08 14.06 14.08 14.05 14.11 14.06 14.08 14.01 13.69 14.22 12.76 12.62 14.29 14.23 14.64 14.48 14.34 14.60 TOTAL POWER
(mW) 51.825 50.879 50.82 51.054 50.996 51.231 50.763 49.812 37.161 53.338 57.161 56.004 TOTAL POWER
(dBm) 17.15 17.07 17.06 17.08 17.08 17.10 17.06 16.97 15.70 17.27 17.57 17.48 POWER LIMIT
(dBm) 24 24 24 24 24 24 24 24 24 30 30 30 PASS /
FAIL PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS PASS 26dB OCCUPIED BANDWIDTH:
CHANNEL CHANNEL FREQUENCY (MHz) 36 40 48 52 60 64 100 120 140 5180 5200 5240 5260 5300 5320 5500 5600 5700 26dBc BANDWIDTH (MHz) CHAIN 0 26.32 23.06 22.16 31.40 27.07 26.61 28.74 24.36 20.39 CHAIN 1 30.65 23.97 28.51 28.50 34.54 29.68 37.95 24.34 22.24 Note: For U-NII-2A, U-NII-2C Band output power limitation is determined based on 26dBc bandwidth. Report No.: RF140606E01-1 74 of 97 Report Format Version 5.3.0 Power Limit = 11dBm + 10logB < U-NII-2A, U-NII-2C >
Channel Number Freq.(MHz) Min. B(MHz) 52 60 64 100 120 140 5260 5300 5320 5500 5600 5700 28.50 27.07 26.61 28.74 24.34 20.39 Determined Conducted Limit (dBm) 25.54 > 24 25.32 > 24 25.25 > 24 25.58 > 24 24.86 > 24 24.09 > 24 802.11ac (VHT20) / Chain(0) : CH140 SPECTRUM PLOT OF WORST VALUE Report No.: RF140606E01-1 75 of 97 Report Format Version 5.3.0 CHAN. 802.11ac (VHT40) CHAN. FREQ.
(MHz) 5190 5230 5270 5310 5510 5590 5670 5755 5795 38 46 54 62 102 118 134 151 159 AVERAGE POWER (dBm) CHAIN 0 CHAIN 1 10.67 10.62 13.85 13.91 13.56 13.61 13.58 13.55 13.62 13.64 14.14 13.51 13.46 13.34 12.04 13.09 13.81 14.31 TOTAL POWER
(mW) 23.203 48.87 45.66 45.449 46.135 48.381 43.759 36.366 51.021 TOTAL POWER
(dBm) 13.66 16.89 16.60 16.58 16.64 16.85 16.41 15.61 17.08 POWER LIMIT
(dBm) 24 24 24 24 24 24 24 30 30 PASS /
FAIL PASS PASS PASS PASS PASS PASS PASS PASS PASS 26dB OCCUPIED BANDWIDTH:
CHANNEL CHANNEL FREQUENCY (MHz) 38 46 54 62 102 118 134 5190 5230 5270 5310 5510 5590 5670 26dBc BANDWIDTH (MHz) CHAIN 0 41.86 65.62 59.87 46.21 54.06 49.84 46.24 CHAIN 1 41.23 59.83 59.76 56.49 56.13 65.06 50.27 Note: For U-NII-2A, U-NII-2C Band output power limitation is determined based on 26dBc bandwidth. Report No.: RF140606E01-1 76 of 97 Report Format Version 5.3.0 Power Limit = 11dBm + 10logB < U-NII-2A, U-NII-2C >
Channel Number 54 62 102 118 134 Freq.(MHz) Min. B(MHz) 5270 5310 5510 5590 5670 59.76 46.21 54.06 49.84 46.24 Determined Conducted Limit (dBm) 28.76 > 24 27.64 > 24 28.32 > 24 27.97 > 24 27.65 > 24 802.11ac (VHT40) / Chain(0) : CH62 SPECTRUM PLOT OF WORST VALUE Report No.: RF140606E01-1 77 of 97 Report Format Version 5.3.0 CHAN. 802.11ac (VHT80) CHAN. FREQ.
(MHz) 5210 5290 5530 5610 5775 42 58 106 122 155 AVERAGE POWER (dBm) CHAIN 0 CHAIN 1 9.23 9.36 9.23 9.42 8.19 8.24 14.25 13.85 8.37 9.04 TOTAL POWER
(mW) 17.005 17.125 13.26 50.873 14.888 TOTAL POWER
(dBm) 12.31 12.34 11.23 17.06 11.73 POWER LIMIT
(dBm) 24 24 24 24 30 PASS /
FAIL PASS PASS PASS PASS PASS 26dB OCCUPIED BANDWIDTH:
CHANNEL CHANNEL FREQUENCY (MHz) 42 58 106 122 5210 5290 5530 5610 26dBc BANDWIDTH (MHz) CHAIN 0 82.09 82.35 143.48 160.00 CHAIN 1 82.19 150.18 144.22 160.00 Note: For U-NII-2A, U-NII-2C Band output power limitation is determined based on 26dBc bandwidth. Power Limit = 11dBm + 10logB < U-NII-2A, U-NII-2C >
Channel Number 58 106 122 Freq.(MHz) Min. B(MHz) 5290 5530 5610 82.35 143.48 160.00 Determined Conducted Limit (dBm) 30.15 > 24 32.56 > 24 33.04 > 24 Report No.: RF140606E01-1 78 of 97 Report Format Version 5.3.0 802.11ac (VHT80) / Chain(0) : CH58 SPECTRUM PLOT OF WORST VALUE Report No.: RF140606E01-1 79 of 97 Report Format Version 5.3.0 4.4 PEAK POWER SPECTRAL DENSITY MEASUREMENT 4.4.1 LIMITS OF PEAK POWER SPECTRAL DENSITY MEASUREMENT Operation EUT Category LIMIT Band U-NII-1 U-NII-2A U-NII-2C U-NII-3 Outdoor Access Point Fixed point-to-point Access Point 17dBm/ MHz Indoor Access Point Mobile and Portable client device
---
---
---
11dBm/ MHz 11dBm/ MHz 11dBm/ MHz 30dBm/ 500kHz 4.4.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSV 40 100964 July 15, 2013 July 14, 2014 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 02, 2014 Report No.: RF140606E01-1 80 of 97 Report Format Version 5.3.0 4.4.3 TEST PROCEDURES Using method SA-1 (Duty cycle >98%<98%) For U-NII-1, U-NII-2A & U-NII-2C:
1. Set span to encompass the entire emission bandwidth (EBW) of the signal. 2. Set RBW = 1 MHz, Set VBW 3 MHz, Detector = RMS 3. Sweep time = auto, trigger set to free run. 4. Trace average at least 100 traces in power averaging mode. 5. Record the max value and for duty cycle of test signal is < 98% add 10 log
(1/duty cycle) For U-NII-3:
1. Set span to encompass the entire emission bandwidth (EBW) of the signal. 2. Set RBW = 300 kHz, Set VBW 1 MHz, Detector = RMS 3. Use the peak marker function to determine the maximum power level in any 300 kHz band segment within the fundamental EBW. 4. Scale the observed power level to an equivalent value in 500 kHz by adjusting (reducing) the measured power by a bandwidth correction factor
(BWCF) where BWCF = 10log(500 kHz/300kHz) 5. Sweep time = auto, trigger set to free run. 6. Trace average at least 100 traces in power averaging mode. 7. Record the max value and for duty cycle of test signal is < 98% add 10 log
(1/duty cycle) Report No.: RF140606E01-1 81 of 97 Report Format Version 5.3.0 4.4.4 DEVIATION FROM TEST STANDARD No deviation 4.4.5 TEST SETUP 4.4.6 EUT OPERATING CONDITIONS Same as 4.3.6 Attenuator EUT SPECTRUM ANALYZER Report No.: RF140606E01-1 82 of 97 Report Format Version 5.3.0 4.4.7 TEST RESULTS For U-NII-1, U-NII-2A & U-NII-2C:
802.11a CHANNEL CHANNEL FREQUENCY
(MHz) PSD (dBm) CHAIN 0 CHAIN 1 36 40 48 52 60 64 100 120 140 5180 5200 5240 5260 5300 5320 5500 5600 5700
-2.17 0.30 0.07
-1.13
-2.52
-1.58
-1.14
-0.13
-0.53 0.00 1.64
-0.67 0.58
-0.06 0.17 0.52 0.39 0.74 TOTAL POWER DENSITY
(dBm) 2.06 4.03 2.73 2.82 1.89 2.39 2.78 3.15 3.16 MAX. LIMIT
(dBm) PASS/FAIL 11 11 11 11 11 11 11 11 11 PASS PASS PASS PASS PASS PASS PASS PASS PASS NOTE: 1. Method a) of power density measurement of KDB 662911 is using for calculating total power density. Total power density is summing entire spectra across corresponding frequency bins on the various outputs by computer. 2. 5150~5250MHz: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 3.74dBi < 6dBi , so the power density limit shall not be reduced. 5250~5350MHz: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 3.74dBi < 6dBi , so the power density limit shall not be reduced. 5470~5725MHz: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 3.47dBi < 6dBi , so the power density limit shall not be reduced. Report No.: RF140606E01-1 83 of 97 Report Format Version 5.3.0 802.11ac (VHT20) CHANNEL CHANNEL FREQUENCY
(MHz) PSD (dBm) CHAIN 0 CHAIN 1 36 40 48 52 60 64 100 120 140 5180 5200 5240 5260 5300 5320 5500 5600 5700
-1.72
-1.88
-2.30
-1.91
-2.07
-0.92
-0.66
-1.37
-4.55
-0.44 1.53 0.49 0.51
-0.10
-0.64
-0.08
-0.60 0.19 TOTAL POWER DENSITY
(dBm) 1.98 3.16 2.33 2.48 2.04 2.23 2.65 2.04 1.45 MAX. LIMIT
(dBm) PASS/FAIL 11 11 11 11 11 11 11 11 11 PASS PASS PASS PASS PASS PASS PASS PASS PASS NOTE: 1. Method a) of power density measurement of KDB 662911 is using for calculating total power density. Total power density is summing entire spectra across corresponding frequency bins on the various outputs by computer. 2. 5150~5250MHz: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 3.74dBi < 6dBi , so the power density limit shall not be reduced. 5250~5350MHz: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 3.74dBi < 6dBi , so the power density limit shall not be reduced. 5470~5725MHz: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 3.47dBi < 6dBi , so the power density limit shall not be reduced. Report No.: RF140606E01-1 84 of 97 Report Format Version 5.3.0 802.11ac (VHT40) CHANNEL CHANNEL FREQUENCY
(MHz) PSD (dBm) CHAIN 0 CHAIN 1 38 46 54 62 102 118 134 5190 5230 5270 5310 5510 5590 5670
-7.64
-4.34
-5.69
-5.32
-4.26
-6.06
-5.60
-9.60
-3.58
-3.93
-4.16
-3.26
-4.76
-5.80 TOTAL POWER DENSITY
(dBm)
-5.50
-0.93
-1.71
-1.69
-0.72
-2.35
-2.69 MAX. LIMIT
(dBm) PASS/FAIL 11 11 11 11 11 11 11 PASS PASS PASS PASS PASS PASS PASS NOTE: 1. Method a) of power density measurement of KDB 662911 is using for calculating total power density. Total power density is summing entire spectra across corresponding frequency bins on the various outputs by computer. 2. 5150~5250MHz: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 3.74dBi < 6dBi , so the power density limit shall not be reduced. 5250~5350MHz: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 3.74dBi < 6dBi , so the power density limit shall not be reduced. 5470~5725MHz: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 3.47dBi < 6dBi , so the power density limit shall not be reduced. Report No.: RF140606E01-1 85 of 97 Report Format Version 5.3.0 802.11ac (VHT80) CHANNEL CHANNEL FREQUENCY
(MHz) 42 58 106 122 5210 5290 5530 5610 PSD (dBm) CHAIN 0 CHAIN 1
-14.01
-13.39
-12.88
-9.36
-12.49
-12.62
-12.63
-8.00 TOTAL POWER DENSITY
(dBm)
-10.17
-9.98
-9.74
-5.62 MAX. LIMIT
(dBm) PASS/FAIL 11 11 11 11 PASS PASS PASS PASS NOTE: 1. Method a) of power density measurement of KDB 662911 is using for calculating total power density. Total power density is summing entire spectra across corresponding frequency bins on the various outputs by computer. 2. 5150~5250MHz: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 3.74dBi < 6dBi , so the power density limit shall not be reduced. 5250~5350MHz: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 3.74dBi < 6dBi , so the power density limit shall not be reduced. 5470~5725MHz: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 3.47dBi < 6dBi , so the power density limit shall not be reduced. 802.11a / Chain(1) : CH40 802.11ac (VHT20) / Chain(1) : CH40 SPECTRUM PLOT OF WORST VALUE 802.11ac (VHT40) / Chain(1) : CH102 802.11ac (VHT80) / Chain(1) : CH122 Report No.: RF140606E01-1 86 of 97 Report Format Version 5.3.0 For U-NII-3:
802.11a TX CHAIN CHANNEL FREQUENCY 0 1 149 157 165 149 157 165 0 1 149 157 165 149 157 165
(MHz) 5745 5785 5825 5745 5785 5825
(MHz) 5745 5785 5825 5745 5785 5825 802.11ac (VHT20) CHAIN CHANNEL FREQUENCY TX PSD
(dBm/300kHz) PSD
(dBm/500kHz)
-8.77
-8.23
-8.38
-7.05
-6.84
-7.68
-6.55
-6.01
-6.16
-4.83
-4.62
-5.46 10 log (N=2) dB 3.01 3.01 3.01 3.01 3.01 3.01 TOTAL PSD
(dBm/500kHz) LIMIT
(dBm/500kHz)
-3.54
-3.00
-3.15
-1.82
-1.61
-2.45 30 30 30 30 30 30 PASS
/FAIL PASS PASS PASS PASS PASS PASS NOTE: 1. 5725~5825MHz: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 4.55dBi < 6dBi , so the power density limit shall not be reduced. PSD
(dBm/300kHz) PSD
(dBm/500kHz)
-9.31
-8.70
-8.33
-8.11
-7.20
-7.81
-7.09
-6.48
-6.11
-5.89
-4.98
-5.59 10 log (N=2) dB 3.01 3.01 3.01 3.01 3.01 3.01 TOTAL PSD
(dBm/500kHz) LIMIT
(dBm/500kHz)
-4.08
-3.47
-3.10
-2.88
-1.97
-2.58 30 30 30 30 30 30 PASS
/FAIL PASS PASS PASS PASS PASS PASS NOTE: 1. 5725~5825MHz: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 4.55dBi < 6dBi , so the power density limit shall not be reduced. 802.11ac (VHT40) TX CHAIN CHANNEL FREQUENCY
(MHz) 5755 5795 5755 5795 PSD
(dBm/300kHz)
-14.27
-12.74
-13.81
-11.86 PSD
(dBm/500kHz)
-12.05
-10.52
-11.59
-9.64 10 log (N=2) dB 3.01 3.01 3.01 3.01 TOTAL PSD
(dBm/500kHz) LIMIT
(dBm/500kHz)
-9.04
-7.51
-8.58
-6.63 30 30 30 30 PASS
/FAIL PASS PASS PASS PASS 0 1 151 159 151 159 NOTE: 1. 5725~5825MHz: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 4.55dBi < 6dBi , so the power density limit shall not be reduced. Report No.: RF140606E01-1 87 of 97 Report Format Version 5.3.0 802.11ac (VHT80) TX CHAIN CHANNEL FREQUENCY 0
(MHz) 5775 155 PSD
(dBm/300kHz)
-21.65 1 155 5775
-21.00 PSD
(dBm/500kHz)
-19.43
-18.78 10 log (N=2) dB 3.01 3.01 TOTAL PSD
(dBm/500kHz) LIMIT
(dBm/500kHz)
-16.42
-15.77 30 30 PASS
/FAIL PASS PASS NOTE: 1. 5725~5825MHz: Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2] = 4.55dBi < 6dBi , so the power density limit shall not be reduced. 2. Refer to section 3.4 for duty cycle spectrum plot. 802.11a / Chain(1) : CH157 802.11ac (VHT20) / Chain(1) : CH157 SPECTRUM PLOT OF WORST VALUE 802.11ac (VHT40) / Chain(1) : CH159 802.11ac (VHT80) / Chain(1) : CH155 Report No.: RF140606E01-1 88 of 97 Report Format Version 5.3.0 4.5 FREQUENCY STABILITY 4.5.1 LIMITS OF FREQUENCY STABILITY MEASUREMENT The frequency of the carrier signal shall be maintained within band of operation 4.5.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Temperature Humidity Chamber GIANTFORCE Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSV 40 100964 July 15, 2013 July 14, 2014
&
GTH-150-40-SP
-AR MAA0812-008 Jan. 13, 2014 Jan. 12, 2015 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 02, 2014 4.5.3 TEST PROCEDURE 1. The EUT was placed inside the environmental test chamber and powered by nominal AC voltage. 2. Turn the EUT on and couple its output to a spectrum analyzer. 3. Turn the EUT off and set the chamber to the highest temperature specified. 4. Allow sufficient time (approximately 30 min) for the temperature of the chamber to stabilize, turn the EUT on and measure the operating frequency after 2, 5, and 10 minutes. 5. Repeat step 2 and 3 with the temperature chamber set to the lowest temperature. 6. The test chamber was allowed to stabilize at +20 degree C for a minimum of 30 minutes. The supply voltage was then adjusted on the EUT from 85% to 115% and the frequency record. Report No.: RF140606E01-1 89 of 97 Report Format Version 5.3.0 4.5.4 DEVIATION FROM TEST STANDARD No deviation Temperature Spectrum Analyzer 4.5.5 TEST SETUP AC Power Supply 4.5.6 EUT OPERATING CONDITION Set the EUT transmit at un-modulation mode to test frequency stability. Report No.: RF140606E01-1 90 of 97 Report Format Version 5.3.0 4.5.7 TEST RESULTS FREQUEMCY STABILITY VERSUS TEMP. OPERATING FREQUENCY: 5320MHz 0 MINUTE 2 MINUTE 5 MINUTE 10 MINUTE TEMP.
() POWER SUPPLY
(Vac) Measured Frequency Frequency Drift Measured Frequency Frequency Drift Measured Frequency Frequency Drift Measured Frequency Frequency Drift
(MHz)
%
(MHz)
%
(MHz)
%
(MHz)
%
120 120 120 120 120 120 120 120 120 5319.9712
-0.00054 5319.9754
-0.00046 5319.972
-0.00053 5319.9743
-0.00048 5320.0112 0.00021 5320.0114 0.00021 5320.009 0.00017 5320.0104 0.00020 5320.0233 0.00044 5320.022 0.00041 5320.0267 0.00050 5320.0218 0.00041 5319.9728
-0.00051 5319.9732
-0.00050 5319.9763
-0.00045 5319.972
-0.00053 5319.9899
-0.00019 5319.9933
-0.00013 5319.9897
-0.00019 5319.9892
-0.00020 5320.0107 0.00020 5320.0156 0.00029 5320.0119 0.00022 5320.0107 0.00020 5320.0108 0.00020 5320.0127 0.00024 5320.0099 0.00019 5320.0104 0.00020 5320.0235 0.00044 5320.0209 0.00039 5320.0207 0.00039 5320.0211 0.00040 5320.0141 0.00027 5320.0135 0.00025 5320.0167 0.00031 5320.0122 0.00023 50 40 30 20 10 0
-10
-20
-30 FREQUEMCY STABILITY VERSUS VOLTAGE OPERATING FREQUENCY: 5320MHz 0 MINUTE 2 MINUTE 5 MINUTE 10 MINUTE Measured Frequency Frequency Drift Measured Frequency Frequency Drift Measured Frequency Frequency Drift Measured Frequency Frequency Drift
(MHz)
%
(MHz)
%
(MHz)
%
(MHz)
%
5319.9731
-0.00051 5319.9739
-0.00049 5319.9757
-0.00046 5319.9713
-0.00054 5319.9728
-0.00051 5319.9732
-0.00050 5319.9763
-0.00045 5319.972
-0.00053 5319.9735
-0.00050 5319.9736
-0.00050 5319.9765
-0.00044 5319.973
-0.00051 TEMP.
() POWER SUPPLY
(Vac) 138 120 102 20 Report No.: RF140606E01-1 91 of 97 Report Format Version 5.3.0 4.6 6dB BANDWIDTH MEASUREMENT 4.6.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.6.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER SPECTRUM ANALYZER R&S Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSV 40 100964 July 15, 2013 July 14, 2014 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 02, 2014 4.6.3 TEST PROCEDURE 1. Set resolution bandwidth (RBW) = 100kHz. 2. Set the video bandwidth (VBW) 3 x RBW, Detector = Peak. 3. Trace mode = max hold. 4. Sweep = auto couple. 5. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.6.4 DEVIATION FROM TEST STANDARD No deviation 4.6.5 TEST SETUP EUT Attenuator SPECTRUM ANALYZER 4.6.6 EUT OPERATING CONDITIONS The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF140606E01-1 92 of 97 Report Format Version 5.3.0 4.6.7 TEST RESULTS 802.11a CHANNEL 149 157 165 CHANNEL FREQUENCY
(MHz) 5745 5785 5825 6dB BANDWIDTH (MHz) CHAIN 1 CHAIN 0 16.60 16.61 16.60 16.58 16.55 16.61 MINIMUM LIMIT (MHz) PASS / FAIL 0.5 0.5 0.5 PASS PASS PASS 802.11ac (VHT20) CHANNEL 149 157 165 CHANNEL FREQUENCY
(MHz) 5745 5785 5825 6dB BANDWIDTH (MHz) CHAIN 0 CHAIN 1 17.75 17.72 17.67 17.73 17.72 17.69 MINIMUM LIMIT (MHz) PASS / FAIL 0.5 0.5 0.5 PASS PASS PASS 802.11ac (VHT40) CHANNEL 151 159 CHANNEL FREQUENCY
(MHz) 5755 5795 6dB BANDWIDTH (MHz) CHAIN 1 CHAIN 0 36.51 36.44 36.55 36.53 MINIMUM LIMIT (MHz) PASS / FAIL 0.5 0.5 PASS PASS 802.11ac (VHT80) CHANNEL FREQUENCY
(MHz) 5775 6dB BANDWIDTH (MHz) CHAIN 1 CHAIN 0 76.82 76.77 MINIMUM LIMIT (MHz) PASS / FAIL 0.5 PASS CHANNEL 155 Report No.: RF140606E01-1 93 of 97 Report Format Version 5.3.0 802.11a / Chain(1) : CH165 802.11ac (VHT20) / Chain(1) : CH157 SPECTRUM PLOT OF WORST VALUE 802.11ac (VHT40) / Chain(0) : CH151 802.11ac (VHT80) / Chain(1) : CH155 Report No.: RF140606E01-1 94 of 97 Report Format Version 5.3.0 5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF140606E01-1 95 of 97 Report Format Version 5.3.0 6. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following:
Linko EMC/RF Lab:
Tel: 886-2-26052180 Fax: 886-2-26052943 Hwa Ya EMC/RF/Safety/Telecom Lab:
Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com Hsin Chu EMC/RF Lab:
Tel: 886-3-5935343 Fax: 886-3-5935342 The address and road map of all our labs can be found in our web site also. Report No.: RF140606E01-1 96 of 97 Report Format Version 5.3.0 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No modifications were made to the EUT by the lab during the test.
--- END ---
Report No.: RF140606E01-1 97 of 97 Report Format Version 5.3.0
1 2 3 | Test Setup Photos (DFS) | Test Setup Photos | 96.19 KiB | July 15 2014 / October 15 2014 |
PHOTOGRAPHS OF THE TEST CONFIGURATION Set UUT as Slave mode (Radar injected into Master) Master UUT Radar 1
1 2 3 | Test Setup Photos | Test Setup Photos | 542.26 KiB | July 15 2014 / October 15 2014 |
PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: 140407E07 1 of 4 RADIATED EMISSION TEST (Below 1GHz) Report No.: 140407E07 2 of 4 RADIATED EMISSION TEST (Above 1GHz) Report No.: 140407E07 3 of 4 Report No.: 140407E07 4 of 4
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-07-15 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | ||
3 | 2412 ~ 2462 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2014-07-15
|
||||
1 2 3 | Applicant's complete, legal business name |
HON HAI Precision Ind. Co., Ltd.
|
||||
1 2 3 | FCC Registration Number (FRN) |
0010777365
|
||||
1 2 3 | Physical Address |
5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park
|
||||
1 2 3 |
5F-1, 5, Hsin-An Road
|
|||||
1 2 3 |
Hsinchu, N/A
|
|||||
1 2 3 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
c******@curtis-straus.com
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
MCL
|
||||
1 2 3 | Equipment Product Code |
T77H526
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
M**** C********
|
||||
1 2 3 | Title |
Compliance Deputy Manager
|
||||
1 2 3 | Telephone Number |
+886-********
|
||||
1 2 3 | Fax Number |
+886-********
|
||||
1 2 3 |
r******@foxconn.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/15/2014 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 3 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 3 | DTS - Digital Transmission System | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11ac+802.11abgn + BT4.0+BT3.0+BT2.1/EDR Module | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Single Modular Approval | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. | ||||
1 2 3 | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
||||
1 2 3 | Name |
R******** C********
|
||||
1 2 3 | Telephone Number |
+886-******** Extension:
|
||||
1 2 3 | Fax Number |
+886-********
|
||||
1 2 3 |
r******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.052 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | 38 CC MO ND | 5260 | 5320 | 0.052 | |||||||||||||||||||||||||||||||||||
2 | 3 | 15E | 38 CC MO ND | 5500 | 5700 | 0.051 | |||||||||||||||||||||||||||||||||||
2 | 4 | 15E | 38 CC MO | 5745 | 5825 | 0.057 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402 | 2480 | 0.005 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15C | CC MO | 2412 | 2462 | 0.607 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC