all | frequencies |
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|
manual | photos |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 346.50 KiB | April 03 2014 | |||
1 2 |
|
Internal Photos | Internal Photos | 128.52 KiB | November 24 2015 | |||
1 2 |
|
External Photos | External Photos | 552.94 KiB | November 24 2015 | |||
1 2 | Antenna Specifications for RFID (ANT-M031A) | Operational Description | November 24 2015 | confidential | ||||
1 2 |
|
Cover Letter - Agent Authorization | Cover Letter(s) | 92.44 KiB | November 24 2015 | |||
1 2 |
|
Cover Letter - Confidentiality Request - Long Term | Cover Letter(s) | 462.31 KiB | November 24 2015 | |||
1 2 |
|
Cover Letter - Confidentiality Request - Short Term | Cover Letter(s) | 73.23 KiB | November 24 2015 | |||
1 2 |
|
Cover Letter - Description of Change | Cover Letter(s) | 72.19 KiB | November 24 2015 | |||
1 2 |
|
Cover Letter - Original Grant | Cover Letter(s) | 68.45 KiB | November 24 2015 | |||
1 2 |
|
RF Exposure Information (MPE) | RF Exposure Info | 317.44 KiB | November 24 2015 | |||
1 2 |
|
Test Report | Test Report | 544.81 KiB | November 24 2015 | |||
1 2 |
|
Test Setup Photo | Test Setup Photos | 211.69 KiB | November 24 2015 / May 22 2016 | |||
1 2 |
|
Confidentiality Request (Short-term) | Cover Letter(s) | 39.38 KiB | April 03 2014 | |||
1 2 |
|
Confidentiality Request | Cover Letter(s) | 18.23 KiB | April 03 2014 | |||
1 2 |
|
Cover Letter (Agent Authorization) | Cover Letter(s) | 30.56 KiB | April 03 2014 | |||
1 2 |
|
Cover Letter (Modular Approval Request) | Cover Letter(s) | 44.92 KiB | April 03 2014 | |||
1 2 |
|
Label and Location | ID Label/Location Info | 19.34 KiB | April 03 2014 | |||
1 2 |
|
Operational Description | Operational Description | 39.72 KiB | April 03 2014 | |||
1 2 | RF Exposure Info | April 03 2014 | ||||||
1 2 | Test Setup Photos | April 03 2014 |
1 2 | User Manual | Users Manual | 346.50 KiB | April 03 2014 |
T77H519 NFC Module USER MANUAL Project Name Revision Foxconn project code 1 NFC module 00 T77H519 Contents 1. INTRODUCTION .......................................................................... !
2. HARDWARE SPECIFICATION .................................................................................... 6 3. PRODUCT REQUIREMENTS ...................................................................................... 6 4. INTERFACE OF CONNECTOR OF NFC MODULE .................................................... 7 5. ANTENNA CONNECTOR OF NFC MODULE.............................................................. 8 6. TEST OPERATING INSTRUCTIONS INFO ................................................................. 9 2 1. Introduction The T77H519 NFC module provides contactless payment, contactless ticketing, service discovery, exchange information etc. This module is based on Broadcom BCM20792M solution, which is integrated NFC subsystem, interfaces, and microprocessor and memory unit. 1.1 Scope The NFC module supports for the ISO/IEC 18092, ISO/IEC 21481, ISO/IEC 14443 Types A, B and B, Japanese industrial standard (JIS)(X) 6319-4, and ISO/IEC 15693 standards. 1.2 Function NFC Features
- Reader & Writer mode
- Peer-to-Peer Communication mode
- Card emulation mode BSC (I2C-compatible) and SM bus for host Interface, For I2C -Bus support all speed mode:
- Low-speed mode (100 kbps)
- Fast mode (400 kbps)
- High-speed mode (3.4Mbps) On board XTAL of 26 MHz (+/- 10ppm) On board embedded Secure Element (eSE) with 800kBytes flash memory(option) Windows 8x Logo Device Requirement compliant
- NFC Forum Wave1 Certification
- LLCP (Link Layer Control Protocol)
- SNEP (Simple NDEF Exchange Protocol) RoHS and Green Compliant A. Support Microsoft windows7, Windows 8, Windows 8.1(Blue) platform 3 1.3 Electrical Characteristics Parameter Frequency Range Input Supply Voltage Power consumption VBAT VDD I/O UICC (class C) UICC (class B) Reader mode Writer mode Peer to peer communication Polling mode Target mode Sleep mode Snooze standby mode Communication distance Peer to Peer Communication Speed NFC wake up Operating Temperature Storage Temperature Storage Humidity ESD Level HBM*1 MM Minimum
-
2.8 1.62 1.78 2.9
-
-
-
-
-
-
-
20
-
Typical 13.56 3.3 1.8 1.88 3.1
-
-
-
-
4.1
-
94
-
-
Maximum
-
5.5 3.6 1.98 3.3 247 247 247 14
-
7.0
-
-
424 Units MHz V V V V mA mA mA mA mA uA uA mm Kbps Wake up NFC module from sleep mode by NFC_WAKE signal via I2C command 0 70
~
-20 0
-
-
~
~
2.0K 200 85 85
-
-
%
V V
*1 HBM ESD level is base on without ESD protection components on TX1 and TX2. When assemble the ESD protection component, the ESD level can up to 8KV. 4 1.4 BSC (I2C -compatible) Characteristics Following are the main features of NFC module I2C interface Slave mode Low-speed mode (100kbps), fast mode (400kbps), and high-speed mode (3.4Mbps) 7-bit or 10-bit addressing mode, default boot-up of fixed 7-bit address (0x77), thereafter configurable to 7-bit or 10-bit addresses Dedicated TX and RX FIFOs, 272 bytes each. BSC Timing waveform I2C _REQ is an output signal from the module to the host that it wishes to communicate. The timing diagram as below shows I2C _REQ as active high. The I2C _REQ signal stays high until after the first byte has been read by the host. I2C _REQ timing waveform 5 2. Hardware Specification 2.1 Antenna Electrical Specification Parameter Operating frequency range Communication distance Typical 13.56
> 20 Units MHz mm 3. Product Requirements 3.1 Hardware Requirements of NFC module Form factor Host Interface PCB 15 mm x15mm module with 11-pin FPC connector BSC (I2C -compatible) interface 4-layer design 3.2 Hardware Architecture of NFC module The T77H519 NFC module is based on Broadcom BCM20792M solution, which is integrated NFC subsystem, interfaces, and microprocessor and memory unit. This module is powered from the host (3.3V) and interfaces to the host with I2C signals and with one-
printed antennas, one on-board 26 MHz XTAL and one Secure Element (eSE) with 800kBytes flash memory (option). The functional block diagram is shown as below. 6 4. Interface of Connector of NFC module Manufacturer: JST Manufacturer Part number: 11FHSY-RSM1-GAN-TB(HF) Pin 1 Pin 1 Pin definition Pin Symbol VBAT VDDIO I2C -SDA I2C -SCL 1 2 3 4 5 6 7 NFC_PRESENCE 8 IRQ-NFC REG_UP GND 9 10 11 S1 S2 VDD_Ext_SE UIM_PWR SWP GND GND I/O I I I/O I G O G I O I I/O G G Note Power supply from battery (2.8V - 5.5V) Power supply to I/O (1.62V 3.6V) BSC Serial Data Line, active low BSC Serial Clock Ground BSC request, active high (Host_Wake) Ground NFC Power-on Power supply to External Secure Element
(1.8V or 3.0V) Power supply to UICC (1.78V 3.3V) SWP I/O 0 (Single-Wire Protocol interface) Ground Ground Remark: The connector is bottom conduct with golden plating of FPC cable 7 5. Antenna connector of NFC module Manufacturer: JST Manufacturer Part number: BM03B-ACHKS-GAN-TF(HF) Pin 1 Top view Pin definition Pin Symbol TX2 GND TXI GND GND 1 2 3 S1 S2 Note I/O I/O G I/O G G Coil output 2 Ground Coil output 1 Ground Ground 8 6. Test Operating Instructions Info Please refer to another file named Test SOP for T77H519 NFC series projects. 9 COMPANY CONFIDENTIAL Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions:
(For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit tre installe de telle sorte qu'une distance de 20 cm est respecte entre l'antenne et les utilisateurs, et 2) Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformit supplmentaires requis pour ce module install. COMPANY CONFIDENTIAL IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE:
Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains IC: 2878D-
T77H519. Plaque signaltique du produit final Ce module metteur est autoris uniquement pour une utilisation dans un dispositif o l'antenne peut tre installe de telle sorte qu'une distance de 20cm peut tre maintenue entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante: "Contient des IC: 2878D- T77H519". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires requises et avertissements comme indiqu dans ce manuel. COMPANY CONFIDENTIAL Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any COMPANY CONFIDENTIAL additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID: MCLT77H519. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. For Taiwan Note: 1. 2.
:
XXXyyyLPDzzzz-x (NCC ID)
1 2 | Internal Photos | Internal Photos | 128.52 KiB | November 24 2015 |
CONSTRUCTION PHOTOS OF EUT Report No.: 140205E02B Page 1 Reference No.: 151030E02
1 2 | External Photos | External Photos | 552.94 KiB | November 24 2015 |
CONSTRUCTION PHOTOS OF EUT Report No.: 140205E02B Page 1 Reference No.: 151030E02 Antenna (Brand : Dexerials, Model : ANT-T006E) Report No.: 140205E02B Page 2 Reference No.: 151030E02 Antenna (Brand : Dexerials, Model : ANTM031A) Report No.: 140205E02B Page 3 Reference No.: 151030E02
1 2 | Cover Letter - Agent Authorization | Cover Letter(s) | 92.44 KiB | November 24 2015 |
HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. A G E N C Y A U T H O R I Z A T I O N L E T T E R Date:2015/11/12 Towhomitmayconcern:
We, the undersigned, hereby authorize Amanda Wu of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalfinallmannersrelatingtoFCCapplicationforequipmentauthorization,includingsigning ofalldocumentsrelatingtothesematters.AnyandallactscarriedoutbyAmandaWuofBV CPSTaoyuanonourbehalfshallhavethesameeffectasactsofourown. Ifyouhaveanyquestionsregardingtheauthorization,pleasedonthesitatetocontactus. Sincerelyyours, Signature:
RioChen ComplianceManager HONHAIPRECISIONIND.CO.,LTD. TEL:+88635784975 FAX:+88635775100 Email:rio.chen@foxconn.com
1 2 | Cover Letter - Confidentiality Request - Long Term | Cover Letter(s) | 462.31 KiB | November 24 2015 |
HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. Date:2015/11/12 FCCID:MCLT77H519 FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequest PursuanttoSections0.457and0.459oftheCommissionsRules,theApplicanthereby requestsconfidentialtreatmentofinformationaccompanyingthisApplicationasoutlined below:
Schematics BlockDiagram Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarily releasedtothepublic.Thepublicdisclosureofthesemattersmightbeharmfultothe Applicantandprovideunjustifiedbenefitstoitscompetitors. TheApplicantunderstandsthatpursuanttoRule0.457,disclosureofthisApplicationandall accompanyingdocumentationwillnotbemadebeforethedateoftheGrantforthis application. Sincerelyyours, RioChen ComplianceManager HONHAIPRECISIONIND.CO.,LTD. TEL:+88635784975 FAX:+88635775100 Email:rio.chen@foxconn.com
1 2 | Cover Letter - Confidentiality Request - Short Term | Cover Letter(s) | 73.23 KiB | November 24 2015 |
HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. FederalCommunicationsCommission AuthorizationandEvaluationDivision Date: November 19, 2015 ConfidentialityRequest FCCID:MCLT77H519 PursuanttoSections0.457and0.459ofthecommissionsrules,werequestshortterm confidentialtreatmentforthefollowinginformationuntil180daysaftertheGrantDate ofEquipmentAuthorization)inordertoensuresensitivebusinessinformationremains confidentialuntiltheactualmarketingofthedevice:
TestSetupphotos Sincerelyyours, RioChen ComplianceManager HONHAIPRECISIONIND.CO.,LTD. TEL:+88635784975 FAX:+88635775100 Email:rio.chen@foxconn.com
1 2 | Cover Letter - Description of Change | Cover Letter(s) | 72.19 KiB | November 24 2015 |
HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. Description of Permissive Change Date:2015/11/12 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Attn:OETDept. Ref:FCCClassIIPermissivechangeforFCCID:MCLT77H519
(Originalapprovaldate:03/04/2014) Applicant:HONHAIPRECISIONIND.CO.,LTD. DearExaminer, ThisistorequestaClassIIpermissivechangeforFCCID:MCLT77H519,originallygrantedon 03/04/2014. Detailofchangestothecertifiedmodule:
1. Addonenewantenna. Ifyouhaveanyquestionsregardingthisapplication,pleasefeelfreetocontactme. Sincerelyyours,
==============
RioChen ComplianceManager HONHAIPRECISIONIND.CO.,LTD. TEL:+88635784975 FAX:+88635775100 Email:rio.chen@foxconn.com
1 2 | Cover Letter - Original Grant | Cover Letter(s) | 68.45 KiB | November 24 2015 |
GRANT OF EQUIPMENT AUTHORIZATION Certification Issued Under the Authority of the Federal Communications Commission By:
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 Date of Grant: 03/04/2014 Application Dated: 03/04/2014 HON HAI Precision Ind. Co., Ltd. 5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park Hsinchu, Taiwan Attention: Mrs. Rio Chen , Compliance Deputy Manager NOT TRANSFERABLE EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. FCC IDENTIFIER: MCLT77H519 Name of Grantee: HON HAI Precision Ind. Co., Ltd. Equipment Class: Part 15 Low Power Communication Device Grant Notes Notes:
Modular Type:
FCC Rule Parts 15C Transmitter NFC Module Single Modular Frequency Range (MHZ) 13.56 - 13.56 Output Watts Frequency Tolerance Emission Designator Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
1 2 | RF Exposure Information (MPE) | RF Exposure Info | 317.44 KiB | November 24 2015 |
RF Exposure Report Report No.: SA140205E02B FCC ID: MCLT77H519 Test Model: T77H519 Received Date: Feb. 05, 2014 Test Date: Sep. 18, 2015 Issued Date: Nov. 18, 2015 Applicant: Hon Hai PRECISION IND.CO.,LTD Address: 5F-1, Hsin-An Road, Hsinchu, Science Industrial Park, Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA140205E02B Reference No.: 151030E02 Page No. 1 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 RF Exposure .......................................................................................................................................... 5 2 2.1 Limits For Maximum Permissible Exposure (MPE) ............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 5 2.5 Calculation Result of Maximum Conducted Power ............................................................................. 6 Report No.: SA140205E02B Reference No.: 151030E02 Page No. 2 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. SA140205E02B Description Original release. Date Issued Nov. 18, 2015 Report No.: SA140205E02B Reference No.: 151030E02 Page No. 3 / 6 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits For Maximum Permissible Exposure (MPE) Frequency Range
(MHz) 1.34-30 30-300 300-1500 1500-100,000 Electric Field
(mW/cm2) Strength (V/m) Limits For General Population / Uncontrolled Exposure Magnetic Field Strength (A/m) Power Density Average Time
(minutes) 824/f 27.5 2.19/f 0.073
*(180/f2) 0.2 F/1500 1.0 30 30 30 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Antenna Gain The antennas provided to the EUT, please refer to the following table:
Antenna Antenna Frequency Range Brand Model Gain(dBi) Type PCB PCB NA NA
(MHz to MHz) 13.56 13.56 Antenna Connector ACHR-02V-K ACHR02VK(HF) Cable Length(mm) 61 40 No 1 2 Dexerials Dexerials ANT-T006E ANTM031A Report No.: SA140205E02B Reference No.: 151030E02 Page No. 5 / 6 Report Format Version: 6.1.1 2.5 Calculation Result of Maximum Conducted Power All test data was copied from the original test report (Report No.: SA140205E02) Channel Frequency Electric field Electric field
(MHz)
(dBuV/m) @3m
(V/m) Limit of Electric field
(V/m) 60.76 13.56 54.29 0.116547 Note: Limit of Electric field=824/f Electric field
=54.29dBuV/m
=54.29+20log(3/0.2)2
=101.33 dBuV/m
= 116547uV/m
= 0.116547V/m
--- END ---
3m 0.2m 0.2m 0.2m 0.2m Report No.: SA140205E02B Reference No.: 151030E02 Page No. 6 / 6 Report Format Version: 6.1.1
1 2 | Test Report | Test Report | 544.81 KiB | November 24 2015 |
FCC Test Report Report No.: RF140205E02B FCC ID: MCLT77H519 Test Model: T77H519 Received Date: Feb. 05, 2014 Test Date: Nov. 10, 2015 Issued Date: Nov. 18, 2015 Applicant: HON HAI PRECISION IND. CO., LTD. Address: 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan R.O.C. Test Location (3): E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140205E02B Reference No.: 151030E02 Report Format Version: 6.1.1 Page No. 1 / 24 Table of Contents 4 3 Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 Summary of Test Results ..................................................................................................................... 5 2 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 7 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 8 3.3 Description of Support Units ............................................................................................................... 9 3.3.1 Configuration of System under Test .................................................................................................... 9 3.4 General Description of Applied Standards ........................................................................................ 10 Test Types and Results ....................................................................................................................... 11 4.1 Radiated Emission Measurement ...................................................................................................... 11 4.1.1 Limits of Radiated Emission Measurement ........................................................................................ 11 4.1.2 Test Instruments ................................................................................................................................ 12 4.1.3 Test Procedures ................................................................................................................................. 13 4.1.4 Deviation from Test Standard ............................................................................................................ 13 4.1.5 Test Set Up ........................................................................................................................................ 14 4.1.6 EUT Operating Conditions ................................................................................................................. 14 4.1.7 Test Results ....................................................................................................................................... 15 4.2 Conducted Emission Measurement .................................................................................................. 19 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 19 4.2.2 Test Instruments ................................................................................................................................ 19 4.2.3 Test Procedures ................................................................................................................................. 20 4.2.4 Deviation from Test Standard ............................................................................................................ 20 4.2.5 TEST SETUP .................................................................................................................................... 20 4.2.6 EUT Operating Conditions ................................................................................................................. 20 4.2.7 Test Results ....................................................................................................................................... 21 5 Pictures of Test Arrangements .......................................................................................................... 23 Appendix Information on the Testing Laboratories ................................................................................ 24 Report No.: RF140205E02B Reference No.: 151030E02 Page No. 2 / 24 Report Format Version: 6.1.1 Release Control Record Issue No. RF140205E02B Description Original release. Date Issued Nov. 18, 2015 Report No.: RF140205E02B Reference No.: 151030E02 Page No. 3 / 24 Report Format Version: 6.1.1 2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (SECTION 15.225, 15.215) FCC Clause Test Item 15.207 Conducted emission test 15.225 (a) 15.225 (d) The field strength of any emissions within the band 13.553-13.567 MHz The field strength of any emissions appearing outside of the 13.110-14.010 MHz band Result PASS PASS PASS Remarks Meet the requirement of limit. Minimum passing margin is -10.87dB at 2.41406MHz. Meet the requirement of limit. Minimum passing margin is -69.71dB at 13.56MHz. Meet the requirement of limit. Minimum passing margin is -3.11dB at 267.36MHz. Note: This report is prepared for FCC Class II change. (Added one new adapter)Only conducted emission and radiated emissions (below 1GHz) test items need to be performed. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2:
Measurement Conducted Emissions at mains ports Radiated Emissions up to 1 GHz (966 Chamber 3) Radiated Emissions up to 1 GHz (3m Chamber 4) 2.2 Modification Record There were no modifications required for compliance. Frequency 150kHz ~ 30MHz 30MHz ~ 1000MHz 30MHz ~ 1000MHz Expended Uncertainty
(k=2) () 2.86 dB 5.37 dB 5.19 dB Report No.: RF140205E02B Reference No.: 151030E02 Page No. 5 / 24 Report Format Version: 6.1.1 3 General Information 3.1 General Description of EUT Product Brand Test Model Status of EUT Power Supply Rating Modulation Type Operating Frequency Number of Channel Antenna Type Antenna Connector Accessory Device Data Cable Supplied NFC Module FOXCONN T77H519 ENGINEERING SAMPLE DC 3.3V from host equipment ASK 13.56MHz 1 Refer to Note Refer to Note NA NA Note:
1. This report is prepared for FCC Class II change. The difference compared with the Report No.:
RF140205E02 design is as the following:
Added an antenna as below table:
Original Antenna Antenna Brand Model Dexerials ANT-T006E Brand Model No 1 Newly Antenna No 2 Gain(dBi) Frequency Range
(MHz to MHz) NA 13.56 Antenna Connector ACHR-02V-K Cable Length(mm) 61 Gain(dBi) Frequency Range
(MHz to MHz) Antenna Connector Cable Length(mm) Type PCB Antenna Type PCB ANTM031A Dexerials According to above conditions, only conducted emission and radiated emissions (below 1GHz) test items of new antenna need to be performed. ACHR02VK(HF) 13.56 NA 40 2. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF140205E02B Reference No.: 151030E02 Page No. 6 / 24 Report Format Version: 6.1.1 3.2 Description of Test Modes One channel was provided to this EUT:
Channel FREQ. (MHz) 1 13.56 Report No.: RF140205E02B Reference No.: 151030E02 Page No. 7 / 24 Report Format Version: 6.1.1 3.2.1 Test Mode Applicability and Tested Channel Detail EUT CONFIGURE MODE APPLICABLE TO RE PLC DESCRIPTION
-
Where NOTE: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned RE1G: Radiated Emission above 1GHz PLC: Power Line Conducted Emission on Y-plane. RADIATED EMISSION TEST:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE 1 1 ASK POWER LINE CONDUCTED EMISSION TEST:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE 1 1 ASK TEST CONDITION:
Applicable To Environmental Conditions Input Power RE<1G PLC 25deg. C, 69%RH 25deg. C, 70%RH 25deg. C, 68%RH 120Vac, 60Hz 120Vac, 60Hz Tested By Robert Cheng Jason Huang Report No.: RF140205E02B Reference No.: 151030E02 Page No. 8 / 24 Report Format Version: 6.1.1 3.3 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Model No. Serial No. Remarks Product FCC ID Brand A. B. NOTEBOOK COMPUTER Test tool Dell NA D830 NA 10026042688 FCC DoC Provided by Lab NA NA Supplied by Client Note:
1. All power cords of the above support units are non-shielded (1.8m). ID Descriptions Qty. Length (m) 1. 2. USB to Mini USB 1.1 0.2 Note: The core(s) is(are) originally attached to the cable(s). Data 1 1 3.3.1 Configuration of System under Test COMPUTER (A) NOTEBOOK 1 Test tool (B) Shielding
(Yes/No) Y N Cores (Qty.) Remarks 0 0 Provided by Lab Supplied by Client 2 EUT Report No.: RF140205E02B Reference No.: 151030E02 Page No. 9 / 24 Report Format Version: 6.1.1 3.4 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards:
FCC Part 15, Subpart C (15.225) FCC Part 15, Subpart C (15.215) ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. NOTE: The EUT is also considered as a kind of computer peripheral, because the connection to computer is necessary for typical use. It has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF140205E02B Reference No.: 151030E02 Page No. 10 / 24 Report Format Version: 6.1.1 Test Types and Results 4 4.1 Radiated Emission Measurement 4.1.1 Limits of Radiated Emission Measurement The field strength of any emissions within the band 13.553-13.567 MHz shall not exceed 15,848 microvolts/meter at 30 meters. The field strength of any emissions appearing outside of the 13.110-14.010 MHz band shall not exceed the general radiated emission limits in 15.209. Frequencies
(MHz) 0.009 ~ 0.490 0.490 ~ 1.705 1.705 ~ 30.0 30 ~ 88 88 ~ 216 216 ~ 960 Above 960 Field Strength
(microvolts/meter) Measurement Distance
(meters) 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 300 30 30 3 3 3 3 NOTE:
1. 2. 3. The lower limit shall apply at the transition frequencies. Emission level (dBuV/m) = 20 log Emission level (uV/m). For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF140205E02B Reference No.: 151030E02 Page No. 11 / 24 Report Format Version: 6.1.1 4.1.2 Test Instruments For 30~1000MHz:
DESCRIPTION &
MANUFACTURER Test Receiver Agilent Pre-Amplifier Mini-Circuits Trilog Broadband Antenna SCHWARZBECK RF Cable 8D Software Antenna Tower & Turn Table CT Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL N9038A MY54450088 July 24, 2015 July 23, 2016 ZFL-1000VH2 B VULB 9168 AMP-ZFL-06 Nov. 12, 2014 Nov. 11, 2015 9168-406 966-4-1 966-4-2 966-4-3 Feb. 03, 2015 Feb. 02, 2016 Apr. 03, 2015 Apr. 02, 2016 ADT_Radiated _V8.7.07 NA NA NA NA NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in 966 Chamber No. 4. 4. The FCC Site Registration No. is 292998 5. The CANADA Site Registration No. is 20331-2 6. Tested Date: Nov. 10, 2015 For below 30MHz:
DESCRIPTION &
MANUFACTURER Test Receiver Agilent Pre-Amplifier(*) EMCI Loop Antenna(*) Electro-Metrics RF Cable MODEL NO. EMC001340 EM-6879 N9038A Software Antenna Tower & Turn Table CT Note:
NA ADT_Radiated _V8.7.07 NA frequency above 1GHz if tested. 3. The test was performed in 966 Chamber No. 3. 4. The FCC Site Registration No. is 147459 6. The CANADA Site Registration No. is 20331-1 8. Tested Date: Nov. 10, 2015 SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL MY50010156 Aug. 12, 2015 Aug. 11, 2016 980142 264 LOOPCAB-001 LOOPCAB-002 Jan. 13, 2014 Jan. 12, 2016 Dec. 16, 2014 Dec. 15, 2016 Jan. 18, 2015 Jan. 17, 2016 NA NA NA NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission Report No.: RF140205E02B Reference No.: 151030E02 Page No. 12 / 24 Report Format Version: 6.1.1 4.1.3 Test Procedures a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meters semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Height of receiving antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. NOTE:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and video bandwidth is 3MHz for Peak detection at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 1/T
(Duty cycle < 98%) or 10Hz(Duty cycle > 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF140205E02B Reference No.: 151030E02 Page No. 13 / 24 Report Format Version: 6.1.1 4.1.5 Test Set Up For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions 1. Turn on the power of all equipment. 2. The support unit 1 (NB) runs a test program NFCTestTool.exe to link EUT under transmission condition continuously. Report No.: RF140205E02B Reference No.: 151030E02 Page No. 14 / 24 Report Format Version: 6.1.1 4.1.7 Test Results FREQUENCY RANGE 13.553 ~ 13.567MHz DETECTOR FUNCTION Quasi-Peak (QP) No. 1 2 3 4 5 LOOP ANTENNA TEST DISTANCE: AT 3 M (X AXIS) Emission Level
(dBuV/m) 26.9 QP 39.4 QP 54.3 QP 39.9 QP 26.7 QP Limit
(dBuV/m) Margin
(dB) 80.5 90.5 124.0 90.5 80.5
-53.6
-51.0
-69.7
-50.6
-53.8 Antenna Height
(m) 1.00 V 1.00 V 1.00 V 1.00 V 1.00 V Table Angle
(Degree) 343 343 343 343 343 Raw Value
(dBuV)
-10.88 1.63 57.80 2.06
-11.05 Correction Factor
(dB/m) 37.82 37.80
-3.51 37.79 37.77 Freq.
(MHz) 13.41 13.55
*13.56 13.57 13.71 REMARKS:
1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) Pre-Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value 5. * : Fundamental frequency. The measured field strength was extrapolated to distance 30 meters, using the formula that the limit of field strength varies as the inverse distance square (40dB per decade of distance) Example:
13.56MHz = 15848uV/m
= 84dBuV/m
= 84+20log(30/3)2
= 124dBuV/m 30m 30m 3m Report No.: RF140205E02B Reference No.: 151030E02 Page No. 15 / 24 Report Format Version: 6.1.1 FREQUENCY RANGE 13.553 ~ 13.567MHz DETECTOR FUNCTION Quasi-Peak (QP) NO. 1 2 3 4 5 FREQ.
(MHz) 13.41 13.55
*13.56 13.57 13.71 REMARKS:
LOOP ANTENNA TEST DISTANCE: AT 3 M (Y AXIS) EMISSION LEVEL
(dBuV/m) 26.6 QP 38.0 QP 52.6 QP 38.2 QP 26.0 QP LIMIT
(dBuV/m) MARGIN
(dB) 80.5 90.5 124.0 90.5 80.5
-53.9
-52.5
-71.4
-52.2
-54.5 ANTENNA HEIGHT
(m) 1.00 V 1.00 V 1.00 V 1.00 V 1.00 V TABLE ANGLE
(Degree) 254 254 254 254 254 RAW VALUE
(dBuV)
-11.24 0.15 56.14 0.44
-11.79 CORRECTION FACTOR
(dB/m) 37.82 37.80
-3.51 37.79 37.77 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) Pre-Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value 5. * : Fundamental frequency. The measured field strength was extrapolated to distance 30 meters, using the formula that the limit of field strength varies as the inverse distance square (40dB per decade of distance) Example:
13.56MHz = 15848uV/m
= 84dBuV/m
= 84+20log(30/3)2
= 124dBuV/m 30m 30m 3m Report No.: RF140205E02B Reference No.: 151030E02 Page No. 16 / 24 Report Format Version: 6.1.1 FREQUENCY RANGE Below 30MHz DETECTOR FUNCTION Quasi-Peak (QP) LOOP ANTENNA TEST DISTANCE: AT 3 M (X AXIS) Emission Level
(dBuV/m) 49.1 QP 46.5 QP 43.1 QP 48.3 QP 50.4 QP 40.4 QP Limit
(dBuV/m) Margin
(dB) 72.0 66.0 69.5 69.5 69.5 69.5
-22.9
-19.5
-26.5
-21.3
-19.1
-29.2 Antenna Height
(m) 1.00 V 1.00 V 1.00 V 1.00 V 1.00 V 1.00 V Table Angle
(Degree) 315 360 346 279 5 160 LOOP ANTENNA TEST DISTANCE: AT 3 M (Y AXIS) Emission Level
(dBuV/m) 48.8 QP 44.0 QP 39.6 QP 45.3 QP 49.8 QP 39.8 QP Limit
(dBuV/m) Margin
(dB) 72.0 66.0 69.5 69.5 69.5 69.5
-23.2
-22.0
-29.9
-24.2
-19.7
-29.8 Antenna Height
(m) 1.00 V 1.00 V 1.00 V 1.00 V 1.00 V 1.00 V Table Angle
(Degree) 266 294 266 209 212 307 Raw Value
(dBuV) 45.33 46.07 44.77 52.13 53.84 43.03 Raw Value
(dBuV) 45.07 43.56 41.35 49.18 53.27 42.46 Correction Factor
(dB/m) 3.72 0.47
-1.69
-3.84
-3.44
-2.67 Correction Factor
(dB/m) 3.75 0.46
-1.73
-3.84
-3.45
-2.67 No. 1 2 3 4 5 6 No. 1 2 3 4 5 6 Freq.
(MHz) 0.61 1.20 2.40 23.13 24.96 28.69 Freq.
(MHz) 0.60 1.21 2.41 23.13 24.90 28.69 REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m) 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value Pre-Amplifier Factor (dB) Report No.: RF140205E02B Reference No.: 151030E02 Page No. 17 / 24 Report Format Version: 6.1.1 FREQUENCY RANGE 30~1000MHz DETECTOR FUNCTION Quasi-Peak (QP)
(dB) LIMIT MARGIN
(dBuV/m) ANTENNA HEIGHT 0 50 54 75 257 40 TABLE ANGLE
(Degree)
-9.2
-4.3
-4.4
-3.9
-3.1
-5.6 40.0 46.0 46.0 46.0 46.0 46.0
(m) 2.00 H 1.50 H 1.50 H 1.00 H 1.50 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION LEVEL VALUE
(dBuV/m)
(dBuV) 30.8 QP 39.95 41.7 QP 51.95 41.6 QP 51.05 42.1 QP 51.26 42.9 QP 51.35 40.5 QP 37.13 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 43.29 44.26 43.92 46.48 47.58 37.70 LEVEL
(dBuV/m) 33.6 QP 35.5 QP 34.7 QP 37.3 QP 39.8 QP 41.0 QP
(m) 1.50 V 1.00 V 1.50 V 2.00 V 1.50 V 1.50 V 40.0 40.0 40.0 46.0 46.0 46.0
-6.4
-4.5
-5.3
-8.7
-6.2
-5.0 TABLE ANGLE
(Degree) 332 76 237 162 328 262 ANTENNA HEIGHT
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m)
-9.19
-10.26
-9.44
-9.19
-8.46 3.32 CORRECTION FACTOR
(dB/m)
-9.70
-8.73
-9.26
-9.20
-7.79 3.29 NO. 1 2 3 4 5 6 NO. 1 2 3 4 5 6 FREQ.
(MHz) 64.63 232.39 240.00 251.89 267.36 797.80 FREQ.
(MHz) 30.10 41.01 64.87 248.35 285.30 796.54 REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m) 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) Pre-Amplifier Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value Report No.: RF140205E02B Reference No.: 151030E02 Page No. 18 / 24 Report Format Version: 6.1.1 4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Frequency (MHz) 0.15 - 0.5 0.50 - 5.0 5.0 - 30.0 Quasi-peak 66 - 56 56 60 Conducted Limit (dBuV) Average 56 - 46 46 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 3. All emanations from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. 4.2.2 Test Instruments DESCRIPTION &
MANUFACTURER Test Receiver R&S Line-Impedance Stabilization Network
(for EUT) SCHWARZBECK Line-Impedance Stabilization Network
(for Peripheral ) R&S RF Cable 50 ohms Terminator 50 ohms Terminator Software BVADT MODEL NO. SERIAL NO. CALIBRATED CALIBRATED DATE UNTIL ESCS 30 100375 May 06, 2015 May 05, 2016 NSLK-8127 8127-522 Sep. 01, 2015 Aug. 31, 2016 ENV216 100072 June 11, 2015 June 10, 2016 5D-FB N/A N/A BVADT_Cond_ V7.3.7.3 COCCAB-001 EMC-03 EMC-02 Mar. 09, 2015 Sep. 23, 2015 Oct. 01, 2015 Mar. 08, 2016 Sep. 22, 2016 Sep. 30, 2016 NA NA NA 1. The calibration interval of the above test instruments are 12 months and the calibrations are Note:
traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. C. 3 The VCCI Con C Registration No. is C-3611. 4 Tested Date: Nov. 10, 2015 Report No.: RF140205E02B Reference No.: 151030E02 Page No. 19 / 24 Report Format Version: 6.1.1 4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. NOTE: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP) and average detection (AV) at frequency 0.15MHz-30MHz. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 TEST SETUP Vertical Ground Reference Plane 40cm EUT LISN 80cm Test Receiver Horizontal Ground Reference Plane Note: 1.Support units were connected to second LISN. For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Conditions Same as 4.1.6. Report No.: RF140205E02B Reference No.: 151030E02 Page No. 20 / 24 Report Format Version: 6.1.1 4.2.7 Test Results Phase Line (L) Detector Function Quasi-Peak (QP) /
Average (AV) No 1 2 3 4 5 6 Freq.
[MHz]
0.15000 0.18125 0.50938 2.41406 10.16797 19.70703 Corr. Factor
(dB) 10.26 10.24 10.23 10.25 10.53 10.91 Reading Value Emission Level
[dB (uV)]
[dB (uV)]
Limit
[dB (uV)]
Margin
(dB) Q.P. 32.34 26.37 24.04 29.50 21.19 19.49 AV. 18.27 14.12 19.75 24.88 15.97 15.88 Q.P. 42.60 36.61 34.27 39.75 31.72 30.40 AV. 28.53 24.36 29.98 35.13 26.50 26.79 Q.P. 66.00 64.43 56.00 56.00 60.00 60.00 AV. 56.00 54.43 46.00 46.00 50.00 50.00 Q.P.
-23.40
-27.82
-21.73
-16.25
-28.28
-29.60 AV.
-27.47
-30.07
-16.02
-10.87
-23.50
-23.21 REMARKS:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF140205E02B Reference No.: 151030E02 Page No. 21 / 24 Report Format Version: 6.1.1 Phase No 1 2 3 4 5 6 Neutral (N) Detector Function Quasi-Peak (QP) /
Average (AV) Freq.
[MHz]
0.15000 0.18125 0.23203 0.53281 2.38281 20.37109 Corr. Factor
(dB) 10.24 10.22 10.20 10.21 10.24 10.95 Reading Value Emission Level
[dB (uV)]
[dB (uV)]
Limit
[dB (uV)]
Margin
(dB) Q.P. 34.00 27.43 22.92 18.02 27.46 20.12 AV. 18.68 15.04 13.84 12.99 22.78 15.68 Q.P. 44.24 37.65 33.12 28.23 37.70 31.07 AV. 28.92 25.26 24.04 23.20 33.02 26.63 Q.P. 66.00 64.43 62.38 56.00 56.00 60.00 AV. 56.00 54.43 52.38 46.00 46.00 50.00 Q.P.
-21.76
-26.78
-29.25
-27.77
-18.30
-28.93 AV.
-27.08
-29.17
-28.33
-22.80
-12.98
-23.37 REMARKS:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF140205E02B Reference No.: 151030E02 Page No. 22 / 24 Report Format Version: 6.1.1 5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF140205E02B Reference No.: 151030E02 Page No. 23 / 24 Report Format Version: 6.1.1 Appendix Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following:
Linko EMC/RF Lab Tel: 886-2-26052180 Fax: 886-2-26051924 Hwa Ya EMC/RF/Safety Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com Hsin Chu EMC/RF Lab/Telecom Lab Tel: 886-3-5935343 Fax: 886-3-5935342 The address and road map of all our labs can be found in our web site also.
--- END ---
Report No.: RF140205E02B Reference No.: 151030E02 Page No. 24 / 24 Report Format Version: 6.1.1
1 2 | Test Setup Photo | Test Setup Photos | 211.69 KiB | November 24 2015 / May 22 2016 |
PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: 130725E04 1 of 3 RADIATED EMISSION TEST Report No.: 130725E04 2 of 3 Report No.: 130725E04 3 of 3
1 2 | Confidentiality Request (Short-term) | Cover Letter(s) | 39.38 KiB | April 03 2014 |
HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. Federal Communications Commission Authorization and Evaluation Division Date: February 27, 2014 Confidentiality Request FCC ID: MCLT77H519 Pursuant to Sections 0.457 and 0.459 of the commissions rules, we request short-term confidential treatment for the following information until
(2014/04/25) in order to ensure sensitive business information remains confidential until the actual marketing of the device:
External photos Test Setup photos Users manual Internal Photos Sincerely yours,
-------------------------------------------------------
Rio Chen Compliance Manager HON HAI PRECISION IND. CO., LTD. TEL: +886-3-5784975 FAX: +886-3-5775100 E-mail: rio.chen@foxconn.com
1 2 | Confidentiality Request | Cover Letter(s) | 18.23 KiB | April 03 2014 |
HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. Date: 2014/2/18 FCC ID: MCLT77H519 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:
Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, Rio Chen Compliance Manager HON HAI PRECISION IND. CO., LTD. TEL: +886-3-5784975 FAX: +886-3-5775100 E-mail: rio.chen@foxconn.com
1 2 | Cover Letter (Agent Authorization) | Cover Letter(s) | 30.56 KiB | April 03 2014 |
HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. A G E N C Y A U T H O R I Z A T I O N L E T T E R Date: 2014/2/18 To whom it may concern:
We, the undersigned, , HON HAI PRECISION IND. CO., LTD. hereby authorize Bureau Veritas Consumer Products Services (H.K) Ltd., Taoyuan Branch. of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C approval and any communication needed with the national authority. Any and all acts carried out by Bureau Veritas Consumer Products Services (H.K) Ltd., Taoyuan Branch. on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please dont hesitate to contact us. Thank you!
Sincerely yours, Signature:
Rio Chen Compliance Manager HON HAI PRECISION IND. CO., LTD. TEL: +886-3-5784975 FAX: +886-3-5775100 E-mail: rio.chen@foxconn.com
1 2 | Cover Letter (Modular Approval Request) | Cover Letter(s) | 44.92 KiB | April 03 2014 |
FCC ID: MCLT77H519 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch February 27, 2014 Dear Application Examiner, Hon Hai PRECISION IND.CO., LTD, Its a NFC Module, FCC ID: MCLT77H519 would like to have your authorization as a modular approval specific to the mobile RF exposure condition. The requirements of section 15.212 of FCC rules have been met and shown on the following statements. 1. The modular transmitter must have its own RF shielding. The radio portion of this module has been shielded, please see exhibition External Photo. 2. The modular transmitter must have buffered modulation/data inputs. The EUT has buffered data inputs, it is integrated in chip BCM20792M. 3. The modular transmitter must have its own power supply regulation. The part number of this regulator is BCM20792M. 4. The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C). The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. The modular transmitter must be tested in a stand-alone configuration The EUT was tested in a stand-alone configuration via a extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. The modular transmitter must be labeled with its own FCC ID number. Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. Report No.: RF 140205E02 FCC ID: MCLT77H519 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, signature Hank Chung Assistant Manager Bureau Veritas Consumer Products Services (H.K.) Ltd., Hsinchu Branch Report No.: RF 140205E02
1 2 | Label and Location | ID Label/Location Info | 19.34 KiB | April 03 2014 |
FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label
(Fig. 1) FCC ID: MCLT77H519
1 2 | Operational Description | Operational Description | 39.72 KiB | April 03 2014 |
FCC ID: MCLT77H519 Operational Description The transmitter of the EUT (NFC Module) is powered by 3.3Vdc from host equipment. The antenna is PCB antenna with ACHR-02V-K antenna connector. For more detailed instruction, please take a look at the users manual. Report No.: RF121217E10
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-11-24 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | Class II Permissive Change |
2 | 2014-03-04 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2015-11-24
|
||||
1 2 |
2014-03-04
|
|||||
1 2 | Applicant's complete, legal business name |
HON HAI Precision Ind. Co., Ltd.
|
||||
1 2 | FCC Registration Number (FRN) |
0010777365
|
||||
1 2 | Physical Address |
5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park
|
||||
1 2 |
5F-1, 5, Hsin-An Road
|
|||||
1 2 |
Hsinchu, N/A
|
|||||
1 2 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@curtis-straus.com
|
||||
1 2 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
MCL
|
||||
1 2 | Equipment Product Code |
T77H519
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
M******** C******
|
||||
1 2 | Title |
Compliance Deputy Manager
|
||||
1 2 | Telephone Number |
+886-********
|
||||
1 2 | Fax Number |
+886-********
|
||||
1 2 |
r******@foxconn.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/22/2016 | ||||
1 2 | 04/25/2014 | |||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | NFC Module | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Single Modular Approval | ||||
1 2 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 | Original Equipment | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Class II Permissive Change as described in this filing. Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. | ||||
1 2 | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
||||
1 2 | Name |
R****** C****
|
||||
1 2 | Telephone Number |
+886-******** Extension:
|
||||
1 2 | Fax Number |
+886-********
|
||||
1 2 |
r******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 13.56000000 | 13.56000000 | |||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 13.56000000 | 13.56000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC