all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 183.58 KiB | July 09 2012 / February 01 2013 | |||
1 |
|
Internal Photos | Internal Photos | 282.58 KiB | July 09 2012 / February 01 2013 | |||
1 |
|
External Photos | External Photos | 256.67 KiB | July 09 2012 / February 01 2013 | |||
1 |
|
Label and Location | ID Label/Location Info | 27.94 KiB | July 09 2012 | |||
1 |
|
Attestation - General Declaration | Attestation Statements | 15.94 KiB | July 09 2012 | |||
1 | Block Diagram | Block Diagram | September 07 2012 | confidential | ||||
1 |
|
Confidentiality Request | Cover Letter(s) | 11.50 KiB | July 09 2012 | |||
1 |
|
Confidentiality Request Shortterm | Cover Letter(s) | 11.55 KiB | July 09 2012 | |||
1 |
|
Cover Letter - Agent Authorization | Cover Letter(s) | 22.73 KiB | July 09 2012 | |||
1 |
|
Cover Letter - Modular Approval Request | Cover Letter(s) | 44.77 KiB | July 09 2012 | |||
1 |
|
Operational Description | Operational Description | 38.92 KiB | July 09 2012 | |||
1 |
|
RF Exposure Info | RF Exposure Info | 53.01 KiB | July 09 2012 | |||
1 | Schematics | Schematics | September 07 2012 | confidential | ||||
1 |
|
Test Report | Test Report | 421.41 KiB | July 09 2012 | |||
1 |
|
Test Setup Photos | Test Setup Photos | 339.49 KiB | July 09 2012 / February 01 2013 |
1 | User Manual | Users Manual | 183.58 KiB | July 09 2012 / February 01 2013 |
COMPANY CONFIDENTIAL HON HAI PRECISION IND. CO., LTD. 5F-1, 5 Hsin -An Rd. Ambit Microsystems(Shanghai) LTD. TEL: 86-21-6120-6688 Fax: 86-21-5774-9230
+886-3-577-5100 User Manual Wi-Fi Module Part Name Doc. Rev. Foxconn P/N. Wi-Fi Module 0.0 J20H069 Prepared by Fei-shan Feng Reviewed by Opo. Li Approved by COMPANY CONFIDENTIAL Content 1. Introduction ......................................................................................................................................3 1.1 Scope .................................................................................................................................... 3 1.2 Function ............................................................................................................................... 3 2. Product Overview ............................................................................................................................4 2.1 Block Diagram .................................................................................................................... 4 2.2 Interface and Connector .................................................................................................. 5 3. Product Specification .......................................................................................................................6 3.1 RF Specification ................................................................................................................. 6 3.2 Electrical Specification .................................................................................................... 6 3.2.1 Recommended operating rating ............................................................................... 6 3.2.2 DC Characteristics ..................................................................................................... 6 3.2.3 ESD Information ........................................................................................................ 6 3.3 Mechanical Specifications .............................................................................................. 6 COMPANY CONFIDENTIAL 1. Introduction The J20H069 802.11b/g/n module provides wireless modem functionality utilizing direct sequence spread spectrum and OFDM/CCK technology. This module is based on Atheros MCKY AR9374 solution which is integrated 2.4GHz IEEE802.11 b/g/n
(MAC/baseband/radio) and power amplifiers (PA). 1.1 Scope The wireless LAN is compliant to IEEE 802.11b and IEEE 802.11g and IEEE 802.11n standard. The data rate of 802.11b is up to 11Mbps and fallback rates of 5.5, 2, 1Mbps. The data rate of 802.11g is up to 54Mbps and fallback rates of 48,36,24,18,12,9, 6Mbps. The data rate of 802.11n HT20 with 800ns GI is up to 65Mbps and fallback rates of 58.5, 52, 39, 26, 19.5, 13, 6.5Mbps; the data rate of 802.11n HT20 with 400ns GI is up to 72.2Mbps and fallback rates of 65, 57.8, 43.3, 28.9, 21.7, 14.4, 7.2Mbps. The data rate of 802.11b/g/n is backward compatible. This is 2T2R MIMO device. This module is installed as a client device in TV platform. 1.2 Function IEEE802.11b/g/n (2X2) based on Atheros AR9374 solution
USB 2.0 Interface, High and Full Speeds supported.
Module is powered by the host with a 3.3V +/- 10% supply.
Two PCB printed antennas. (TBD)
Two switch type antenna connector for test
4 layers through hole PCB design with halogen free FR4 material COMPANY CONFIDENTIAL 2. Product Overview 2.1 Block Diagram The general HW architecture is shown below Figure:
COMPANY CONFIDENTIAL 2.2 Interface and Connector Pin definition:
Pin Number Symbol Name Status 1 2 3 4 5 6 7 8 9 10 11 12 13 14 S1 S2 GND WIFI_RST USB_DP NC USB_DN NC GND WO_WLAN GND STBY3.3V GND STBY3.3V GND STBY3.3V GND GND I/O I/O I/O I/O P P P Pin definition Ground Reset pin USB positive data USB negative data Ground Ground
+3.3 V Power input Ground
+3.3 V Power input Ground
+3.3 V Power input Ground Ground COMPANY CONFIDENTIAL 3. Product Specification 3.1 RF Specification IEEE802.11b ( For CE testing , Refer to the CE regulating power table ) 802.11b:20dBm 802.11g:24dBm 802.11n:24dBm 3.2 Electrical Specification 3.2.1 Recommended operating rating Element DC supply voltage 3.2.2 DC Characteristics Symbol UV+
Min 3.0 Typ 3.3 Max 3.6 Unit
(V) Symbol Parameter Supply voltage STBY3.3V Tx Current(1M/18dBm MIMO) Tx Current(54M/15dBm MIMO) Tx Current(MCS7/14dBm/HT20 MIMO) Rx Current Min 3.0
--
--
--
--
Typ 3.3 450 350 350 170 3.2.3 ESD Information Mode HBM MM Level
+/-1500
+/-200 Unit
(V)
(mA)
(mA)
(mA)
(mA) Max 3.6 540 420 420 200 Unit V V 3.3 Mechanical Specifications Dimension (W x L ): 55mmx20mm PCB: 4 layer HF-FR4 design COMPANY CONFIDENTIAL Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions:
(For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit tre installe de telle sorte qu'une distance de 20 cm est respecte entre l'antenne et les utilisateurs, et 2) Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformit supplmentaires requis pour ce module install. IMPORTANT NOTE:
COMPANY CONFIDENTIAL In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE:
Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains IC: 2878D-
J20H069. Plaque signaltique du produit final Ce module metteur est autoris uniquement pour une utilisation dans un dispositif o l'antenne peut tre installe de telle sorte qu'une distance de 20cm peut tre maintenue entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante: "Contient des IC: 2878D- J20H069". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires requises et avertissements comme indiqu dans ce manuel. COMPANY CONFIDENTIAL Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. COMPANY CONFIDENTIAL As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID: MCLJ20H069. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. CE statement:
Declare under our own responsibility that the product J20H069 to which this declaration refers conforms with the relevant standards according to the regulation in Article 3.1.a, 3.1.b and 3.2 of the R&TTE Directive 1999/5/EEC of the European Community Applied Standards:
- ETSI EN 300 328 V1.7.1
- ETSI EN 301 489-1 COMPANY CONFIDENTIAL
- ETSI EN 301 489-17
- ETSI EN 62479
- IEC/EN 60950-1 National Authorities were informed according to Article 6.4 of Frequency Notification. Special Requirements are considered. The product is labeled with CE Marking. Any unauthorized modification of the product voids this declaration. This product can be used in the following countries For Taiwan () COMPANY CONFIDENTIAL Note: 1. 2.
:
XXXyyyLPDzzzz-x (NCC ID) COMPANY CONFIDENTIAL
1 | External Photos | External Photos | 256.67 KiB | July 09 2012 / February 01 2013 |
CONSTRUCTION PHOTOS OF EUT Report No.: 120709E02 1 of 2
1 | Label and Location | ID Label/Location Info | 27.94 KiB | July 09 2012 |
FCC LABEL LOCATION The FCC ID will be printed on J20H069 PCB board.
(Fig. 1) FCC ID: MCLJ20H069
1 | Attestation - General Declaration | Attestation Statements | 15.94 KiB | July 09 2012 |
HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. Date: 2012/7/17 G E N E R A L D E C L A R A T I O N We, HON HAI PRECISION IND. CO., LTD. declares that device does not have Ad Hoc on non-US frequencies while applying for the follow product. FCC ID: MCLJ20H069 If you have any questions regarding the authorization, please dont hesitate to contact us. Thank you!
Signature:
Rio Chen Compliance Manager HON HAI PRECISION IND. CO., LTD. TEL: +886-3-5784975 FAX: +886-3-5775100 E-mail: rio.chen@foxconn.com
1 | Confidentiality Request | Cover Letter(s) | 11.50 KiB | July 09 2012 |
HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. Date:2012/7/17 FCC ID: MCLJ20H069 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:
Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, Rio Chen Compliance Manager HON HAI PRECISION IND. CO., LTD. TEL: +886-3-5784975 FAX: +886-3-5775100 E-mail: rio.chen@foxconn.com
1 | Confidentiality Request Shortterm | Cover Letter(s) | 11.55 KiB | July 09 2012 |
HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. Federal Communications Commission Authorization and Evaluation Division Date: July 20, 2012 Confidentiality Request FCC ID: MCLJ20H069 Pursuant to DA 04-1705 of the Commissions Rules, we request short-term confidential treatment for the following information until January. 1st, 2013 of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:
External Photos Test Setup Photos Users Manual Internal Photo Thank you!
Sincerely yours,
-------------------------------------------------------
Rio Chen Compliance Manager HON HAI PRECISION IND. CO., LTD. TEL: +886-3-5784975 FAX: +886-3-5775100 E-mail: rio.chen@foxconn.com
1 | Cover Letter - Agent Authorization | Cover Letter(s) | 22.73 KiB | July 09 2012 |
HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. A G E N C Y A U T H O R I Z A T I O N L E T T E R Date: 2012/7/17 To whom it may concern:
We, the undersigned, , HON HAI PRECISION IND. CO., LTD. hereby authorize Bureau Veritas Consumer Products Services (H.K) Ltd., Taoyuan Branch. of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C approval and any communication needed with the national authority. Any and all acts carried out by Bureau Veritas Consumer Products Services (H.K) Ltd., Taoyuan Branch. on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please dont hesitate to contact us. Thank you!
Sincerely yours, Signature:
Rio Chen Compliance Manager HON HAI PRECISION IND. CO., LTD. TEL: +886-3-5784975 FAX: +886-3-5775100 E-mail: rio.chen@foxconn.com
1 | Cover Letter - Modular Approval Request | Cover Letter(s) | 44.77 KiB | July 09 2012 |
FCC ID: MCLJ20H069 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch September 4, 2012 Dear Application Examiner, Hon Hai PRECISION IND.CO., LTD, Its a Wi-Fi Module, FCC ID: MCLJ20H069 would like to have your authorization as a modular approval specific to the mobile RF exposure condition. The requirements of section 15.212 of FCC rules have been met and shown on the following statements. 1. The modular transmitter must have its own RF shielding. The radio portion of this module has been shielded, please see exhibition External Photo. 2. The modular transmitter must have buffered modulation/data inputs. The EUT has buffered data inputs, it is integrated in chip AR9374. 3. The modular transmitter must have its own power supply regulation. The part number of this regulator is AR9374. 4. The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C). The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. The modular transmitter must be tested in a stand-alone configuration The EUT was tested in a stand-alone configuration via a extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. The modular transmitter must be labeled with its own FCC ID number. Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. Report No.: RF 120709E02 FCC ID: MCLJ20H069 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, signature Hank Chung Assistant Manager Bureau Veritas Consumer Products Services (H.K.) Ltd., Hsinchu Branch Report No.: RF 120709E02
1 | Operational Description | Operational Description | 38.92 KiB | July 09 2012 |
FCC ID: MCLJ20H069 Operational Description This device is a Wi-Fi Module, which operates in 2.4GHz band; the maximum data rate could be up to 144.4Mbps which OFDM technique. If the signal to noise radio is too poor which could not support 144.4Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by the 3.3Vdc from host equipment. The antenna is PCB antenna without antenna commector. The other instruction, please have a look at the users manual. Report No.: RF 120709E02
1 | RF Exposure Info | RF Exposure Info | 53.01 KiB | July 09 2012 |
RF EXPOSURE REPORT REPORT NO.: SA120709E02 MODEL NO.: J20H069 FCC ID: MCLJ20H069 RECEIVED: July 09, 2012 TESTED: July 18, 2012 ISSUED: Aug. 31, 2012 APPLICANT: Hon Hai PRECISION IND.CO.,LTD ADDRESS: 5F-1, Hsin-An Road, Hsinchu, Science Industrial Park, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA120709E02 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 1 of 6 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT .............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ........................... 6 Report No.: SA120709E02 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 2 of 6 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. SA120709E02 REASON FOR CHANGE Original release DATE ISSUED Aug. 31, 2012 Report No.: SA120709E02 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 3 of 6 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: Wi-Fi Module BRAND NAME: FOXCONN MODEL NO.:
J20H069 TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: Hon Hai PRECISION IND.CO.,LTD TESTED DATE:
July 18, 2012 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 Bureau Veritas The above equipment (Model: J20H069) has been tested by Consumer Products Services (H.K.) Ltd., Taoyuan Branch , and found compliance with the requirement of the above standards. The test record, data evaluation &
Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample conditions specified in this report. s EMC characteristics under the PREPARED BY APPROVED BY
:
:
( Lori Chung, Specialist )
( May Chen, Deputy Manager ) Report No.: SA120709E02 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 4 of 6
, DATE: Aug. 31, 2012
, DATE: Aug. 31, 2012 Report Format Version 5.0.0 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY
(mW/cm2) AVERAGE TIME
(minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 1500-100,000 F = Frequency in MHz F/1500 1.0 30 30 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA120709E02 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 5 of 6 Report Format Version 5.0.0 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY CONDUCTED ANTENNA 2412-2462 BAND
(MHz) POWER
(mW) 292.455 GAIN
(dBi) 4.39 Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2]
Effective Legacy Gain (dBi) = 4.39 DISTANCE
(cm) 20 POWER DENSITY
(mW/ cm2) 0.15988 LIMIT
(mW/cm2) 1.00
--- END ---
Report No.: SA120709E02 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 6 of 6 Report Format Version 5.0.0
1 | Test Report | Test Report | 421.41 KiB | July 09 2012 |
FCC TEST REPORT REPORT NO.: RF120709E02 MODEL NO.: J20H069 FCC ID: MCLJ20H069 RECEIVED: July 09, 2012 TESTED: July 13 to Aug 01, 2012 ISSUED: Aug. 31, 2012 APPLICANT: Hon Hai PRECISION IND.CO.,LTD ADDRESS: 5F-1, Hsin-An Road, Hsinchu, Science Industrial Park, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services
(H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 1 of 49 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD ........................................................................................ 4 CERTIFICATION .................................................................................................... 5 1. 2. SUMMARY OF TEST RESULTS ............................................................................ 6 2.1 MEASUREMENT UNCERTAINTY .......................................................................... 7 GENERAL INFORMATION ..................................................................................... 8 3. 3.1 GENERAL DESCRIPTION OF EUT ....................................................................... 8 3.2 DESCRIPTION OF TEST MODES ....................................................................... 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................ 11 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 14 3.3 3.4 DESCRIPTION OF SUPPORT UNITS .................................................................. 15 CONFIGURATION OF SYSTEM UNDER TEST ................................................... 15 3.5 TEST TYPES AND RESULTS .............................................................................. 16 4. 4.1 CONDUCTED EMISSION MEASUREMENT ........................................................ 16 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ...................................... 16 4.1.2 TEST INSTRUMENTS .......................................................................................... 16 4.1.3 TEST PROCEDURES .......................................................................................... 17 4.1.4 DEVIATION FROM TEST STANDARD ................................................................. 17 4.1.5 TEST SETUP ....................................................................................................... 18 4.1.6 EUT OPERATING CONDITIONS ......................................................................... 18 4.1.7 TEST RESULTS ................................................................................................... 19 4.2 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 21 4.2.2 TEST INSTRUMENTS .......................................................................................... 22 4.2.3 TEST PROCEDURES .......................................................................................... 24 4.2.4 DEVIATION FROM TEST STANDARD ................................................................. 24 4.2.5 TEST SETUP ....................................................................................................... 25 4.2.6 EUT OPERATING CONDITIONS ......................................................................... 25 4.2.7 TEST RESULTS ................................................................................................... 26 4.3 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT .................................................. 36 4.3.2 TEST INSTRUMENTS .......................................................................................... 36 4.3.3 TEST PROCEDURE ............................................................................................. 36 4.3.4 DEVIATION FROM TEST STANDARD ................................................................. 36 4.3.5 TEST SETUP ....................................................................................................... 36 4.3.6 EUT OPERATING CONDITIONS ......................................................................... 36 4.3.7 TEST RESULTS ................................................................................................... 37 4.4 CONDUCTED OUTPUT POWER MEASUREMENT ............................................ 38 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT ..................... 38 4.4.2 INSTRUMENTS .................................................................................................... 38 4.4.3 TEST PROCEDURES .......................................................................................... 38 6dB BANDWIDTH MEASUREMENT .................................................................... 36 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................ 21 Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 2 of 49 Report Format Version 5.0.0 POWER SPECTRAL DENSITY MEASUREMENT ................................................ 40 4.4.4 DEVIATION FROM TEST STANDARD ................................................................. 38 4.4.5 TEST SETUP ....................................................................................................... 38 4.4.6 EUT OPERATING CONDITIONS ......................................................................... 38 4.4.7 TEST RESULTS ................................................................................................... 39 4.5 4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT ............................. 40 4.5.2 TEST INSTRUMENTS .......................................................................................... 40 4.5.3 TEST PROCEDURE ............................................................................................. 40 4.5.4 DEVIATION FROM TEST STANDARD ................................................................. 40 4.5.5 TEST SETUP ....................................................................................................... 40 4.5.6 EUT OPERATING CONDITION ............................................................................ 40 4.5.7 TEST RESULTS ................................................................................................... 41 4.6 4.6.1 LIMITS OF CONDUCTED OUT-BAND EMISSION MEASUREMENT................... 42 4.6.2 TEST INSTRUMENTS .......................................................................................... 42 4.6.3 TEST PROCEDURE ............................................................................................. 42 4.6.4 DEVIATION FROM TEST STANDARD ................................................................. 43 4.6.5 TEST SETUP ....................................................................................................... 43 4.6.6 EUT OPERATING CONDITION ............................................................................ 43 4.6.7 TEST RESULTS ................................................................................................... 43 5. 6. 7. PHOTOGRAPHS OF THE TEST CONFIGURATION ............................................ 47 INFORMATION ON THE TESTING LABORATORIES .......................................... 48 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB .......................................................................................... 49 CONDUCTED OUT-BAND EMISSION MEASUREMENT ..................................... 42 Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 3 of 49 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. RF120709E02 REASON FOR CHANGE Original release DATE ISSUED Aug. 31, 2012 Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 4 of 49 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: Wi-Fi Module BRAND NAME: FOXCONN MODEL NO.:
J20H069 TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: Hon Hai PRECISION IND.CO.,LTD TESTED: July 13 to Aug. 01, 2012 STANDARDS: FCC Part 15, Subpart C (Section 15.247) ANSI C63.10-2009 The above equipment (Model: J20H069) has been tested by Consumer Products Services (H.K.) Ltd., Taoyuan Branch compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample s EMC characteristics under the conditions specified in this report.
, and found Bureau Veritas PREPARED BY APPROVED BY
:
:
( Lori Chung, Specialist )
, DATE: June 22, 2012
, DATE: June 22, 2012
( May Chen, Deputy Manager ) Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 5 of 49 Report Format Version 5.0.0 2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications:
APPLIED STANDARD: FCC PART 15, SUBPART C (SECTION 15.247) STANDARD SECTION TEST TYPE RESULT REMARK 15.207 AC Power Conducted Emission PASS Band Edge Measurement Radiated Emissions 15.247(d) 15.209 15.247(d) 15.247(a)(2) 6dB bandwidth 15.247(b) 15.247(e) 15.203 Conducted power Power Spectral Density Antenna Requirement PASS PASS PASS PASS PASS PASS Meet the requirement of limit. Minimum passing margin is
-22.22dB at 2.66406MHz Meet the requirement of limit. Minimum passing margin is
-3.5dB at 4924.00MHz Meet the requirement of limit. Meet the requirement of limit. Meet the requirement of limit. Meet the requirement of limit. No antenna connector is used. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 6 of 49 Report Format Version 5.0.0 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2:
This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Conducted emissions Radiated emissions (30MHz-1GHz) Radiated emissions (1GHz-6GHz) Radiated emissions (6GHz-18GHz) Radiated emissions (18GHz-40GHz) Value 2.98 dB 5.59 dB 3.84 dB 4.09 dB 4.24 dB Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 7 of 49 Report Format Version 5.0.0 3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT MODEL NO. POWER SUPPLY MODULATION TYPE MODULATION TECHNOLOGY TRANSFER RATE Wi-Fi Module J20H069 DC 3.3V 10% from host equipment CCK, DQPSK, DBPSK for DSSS 64QAM, 16QAM, QPSK, BPSK for OFDM DSSS, OFDM 802.11b: Up to 11Mbps 802.11g: Up to 54Mbps 802.11n (HT20, 800ns GI): Up to 130Mbps 802.11n (HT20, 400ns GI): Up to 144.4Mbps OPERATING FREQUENCY NUMBER OF CHANNEL 11 2.412 ~ 2.462GHz 802.11b: 105.073mW 802.11g: 292.455mW 802.11n (HT20): 276.370mW Please see NOTE NA Refer to users manual MAXIMUM OUTPUT POWER ANTENNA TYPE DATA CABLE I/O PORTS ASSOCIATED DEVICES NA NOTE:
1. The antennas provided to the EUT, please refer to the following table:
No. Type Connector Gain (dBi) Diversity Function Frequency range From MHz to MHz 1 2 PCB PCB NA NA 1.51 1.24 Yes Yes 2400~2483.5 2400~2483.5 2. The EUT incorporates a MIMO function without beam forming. MODULATION MODE 802.11b 802.11g 802.11n (HT20) Tx/Rx FUNCTION 2Tx/2Rx 2Tx/2Rx 2Tx/2Rx Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 8 of 49 Report Format Version 5.0.0 3. When the EUT operating in 802.11n, the software operation, which is defined by manufacturer, MCS (Modulation and Coding Schemes) from 0 to 15. 4. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 9 of 49 Report Format Version 5.0.0 3.2 DESCRIPTION OF TEST MODES Operated in 2400 ~ 2483.5MHz band:
11 channels are provided for 802.11b, 802.11g, 802.11n (HT20):
CHANNEL FREQUENCY CHANNEL FREQUENCY 1 2 3 4 5 6 2412MHz 2417MHz 2422MHz 2427MHz 2432MHz 2437MHz 7 8 9 10 11 2442MHz 2447MHz 2452MHz 2457MHz 2462MHz 7 channels are provided for 802.11n (40MHz):
CHANNEL FREQUENCY CHANNEL FREQUENCY 3 4 5 6 2422MHz 2427MHz 2432MHz 2437MHz 7 8 9 2442MHz 2447MHz 2452MHz Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 10 of 49 Report Format Version 5.0.0 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL EUT CONFIGURE MODE APPLICABLE TO PLC RE < 1G RE 1G APCM
-
OB
-
DESCRIPTION Where PLC: Power Line Conducted Emission RE 1G: Radiated Emission above 1GHz OB: Conducted Out-Band Emission Measurement RE < 1G: Radiated Emission below 1GHz APCM: Antenna Port Conducted Measurement NOTE: The EUT had been pre-tested on the positioned of each 3 axis. The radiated emission worst case was found when positioned on X-plane POWER LINE CONDUCTED EMISSION TEST:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY 802.11g 1 to 11 6 OFDM MODULATION DATA RATE EUT CONFIGURE TYPE BPSK
(Mbps) 6 MODE A RADIATED EMISSION TEST (BELOW 1 GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY 802.11g 1 to 11 6 OFDM MODULATION DATA RATE EUT CONFIGURE TYPE BPSK
(Mbps) 6 MODE A Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 11 of 49 Report Format Version 5.0.0 RADIATED EMISSION TEST (ABOVE 1 GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11b 802.11g 802.11n (HT20) AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY MODULATION DATA RATE TYPE
(Mbps) EUT CONFIGURE MODE 1 to 11 1 to 11 1 to 11 1, 6, 11 1, 6, 11 1, 6, 11 DSSS OFDM OFDM DBPSK BPSK BPSK 1 6 6.5 C C C ANTENNA PORT CONDUCTED MEASUREMENT:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11b 802.11g 802.11n (HT20) AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY MODULATION DATA RATE TYPE
(Mbps) 1 to 11 1 to 11 1 to 11 1, 6, 11 1, 6, 11 1, 6, 11 DSSS OFDM OFDM DBPSK BPSK BPSK 1 6 6.5 EUT CONFIGURE MODE C C C CONDUCTED OUT-BAND EMISSION MEASUREMENT:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. MODE 802.11b 802.11g 802.11n (HT20) AVAILABLE CHANNEL TESTED CHANNEL MODULATION TECHNOLOGY MODULATION DATA RATE TYPE
(Mbps) 1 to 11 1 to 11 1 to 11 1, 6, 11 1, 6, 11 1, 6, 11 DSSS OFDM OFDM DBPSK BPSK BPSK 1 6 6.5 EUT CONFIGURE MODE C C C Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 12 of 49 Report Format Version 5.0.0 TEST CONDITION:
APPLICABLE TO ENVIRONMENTAL CONDITIONS PLC RE<1G RE1G APCM OB 26deg. C, 63%RH 21deg. C, 63%RH 21deg. C, 65%RH 25deg. C, 60%RH 25deg. C, 60%RH INPUT POWER
(SYSTEM) 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz TESTED BY Jyunchun Lin Robert Cheng Robert Cheng Nelson Teng Nelson Teng Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 13 of 49 Report Format Version 5.0.0 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards:
FCC Part 15, Subpart C (15.247) 558074 D01 DTS Meas Guidance v01 ANSI C63.10-2009 All test items have been performed and recorded as per the above standards. NOTE: The EUT is also considered as a kind of computer peripheral, because the connection to computer is necessary for typical use. It has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 14 of 49 Report Format Version 5.0.0 3.4 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID 1 NOTEBOOK COMPUTER 2 Test Tool DELL PP32LA GSLB32S FCC DoC Hon Hai NA 96.1081 NA SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS NO. 1 USB cable (1m) 2 NA NOTE: All power cords of the above support units are non shielded (1.8m). 3.5 CONFIGURATION OF SYSTEM UNDER TEST TEST TABLE 2. Test Tool EUT 1. NOTEBOOK COMPUTER Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 15 of 49 Report Format Version 5.0.0 4. TEST TYPES AND RESULTS 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) 0.15-0.5 0.5-5 5-30 Quasi-peak CONDUCTED LIMIT (dBV) Average 56 to 46 66 to 56 56 60 46 50 NOTE:
1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 4.1.2 TEST INSTRUMENTS ESCS 30 NSLK8127 MODEL NO. DESCRIPTION &
MANUFACTURER Test Receiver Line-Impedance Stabilization Network
(for EUT) SCHWARZBECK Line-Impedance Stabilization Network
(for Peripheral) RF Cable (JYEBAO) 5DFB 50 ohms Terminator 50 BV ADT_Cond_V7.3.7.3 Software ADT ENV216 SERIAL NO. 100375 CALIBRATED DATE Mar. 12, 2012 Mar.11, 2013 CALIBRATED UNTIL 8127-522 Sep. 07, 2011 Sep. 06, 2012 100072 June 08,2012 June 07,2013 COCCAB-001 Aug. 29, 2011 Aug. 28, 2012 EMC-3 Sep. 26, 2011 Sep. 25, 2012 NA NA NA Note:
1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. C. 3 The VCCI Con C Registration No. is C-3611. 4 Tested Date: July 24, 2012 Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 16 of 49 Report Format Version 5.0.0 4.1.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) were not recorded. Note: All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 17 of 49 Report Format Version 5.0.0 4.1.5 TEST SETUP Vertical Grou n d Reference Plan e 4 0c m EU T LISN 80c m Te st Rec eive r Horizonta l Groun d Reference Plan e Note: 1.Su pport units were co nne cted to se con d LISN . 2.Both of LISNs (AMN) are 80 cm from EUT and at least 80 from other units and other metal planes For the actual test configuration, please refer to the related item Photographs of the Test Configuration. 4.1.6 EUT OPERATING CONDITIONS 1. Placed the EUT on testing table. 2. Controlling software (ART2_AR6K_2324_20120628_Sony) has been activated to set the EUT under transmission/receiving condition continuously. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 18 of 49 Report Format Version 5.0.0 4.1.7 TEST RESULTS PHASE Line (L) 6dB BANDWIDTH 9 kHz Emission Reading Value Limit Level
[dB (uV)]
[dB (uV)]
[dB (uV)]
Corr. Factor
(dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV.
-27.43 0.08 0.11
-30.83
-22.22 0.24
-38.08 0.36
-30.83 0.58 0.80
-25.92 25.49 20.10 25.57 20.18 57.61 47.61 21.46 15.06 21.57 15.17 56.00 46.00 30.20 23.54 30.44 23.78 56.00 46.00 21.44 11.56 21.80 11.92 60.00 50.00 26.09 18.59 26.67 19.17 60.00 50.00 29.13 23.28 29.93 24.08 60.00 50.00
-32.04
-34.43
-25.56
-38.20
-33.33
-30.07 Margin
(dB) No 1 2 3 4 5 6 Freq.
[MHz]
0.41172 0.98594 2.66406 5.02734 11.46875 19.71875 REMARKS:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 19 of 49 Report Format Version 5.0.0 PHASE Neutral (N) 6dB BANDWIDTH 9 kHz Emission Reading Value Limit Level
[dB (uV)]
[dB (uV)]
[dB (uV)]
Corr. Factor
(dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 0.06
-33.44
-27.13 0.08
-27.86 0.16 0.19
-27.89
-34.27 0.26 0.65
-30.55 25.25 19.92 25.31 19.98 63.42 53.42 26.14 21.50 26.22 21.58 58.71 48.71 29.22 17.98 29.38 18.14 56.00 46.00 27.13 17.92 27.32 18.11 56.00 46.00 23.09 11.47 23.35 11.73 56.00 46.00 25.23 18.80 25.88 19.45 60.00 50.00
-38.11
-32.49
-26.62
-28.68
-32.65
-34.12 Margin
(dB) No 1 2 3 4 5 6 Freq.
[MHz]
0.20469 0.36094 1.93750 2.66016 4.90625 18.29688 REMARKS:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 20 of 49 Report Format Version 5.0.0 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power:
Frequencies
(MHz) Field strength
(microvolts/meter) Measurement distance
(meters) 0.009-0.490 0.490-1.705 1.705-30.0 30-88 88-216 216-960 Above 960 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500 300 30 30 3 3 3 3 NOTE:
1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 21 of 49 Report Format Version 5.0.0 TEST INSTRUMENTS 4.2.2 For Below 1GHz test:
DESCRIPTION &
MANUFACTURER Spectrum Analyzer Agilent Pre-Selector Agilent Signal Generator Agilent Pre-Amplifier Mini-Circuits Pre-Amplifier Agilent Pre-Amplifier SPACEK LABS Trilog Broadband Antenna SCHWARZBECK Horn_Antenna AISI Horn_Antenna SCHWARZBECK RF Cable RF Cable Software MODEL NO. SERIAL NO. CALIBRATED DATE July 09, 2012 July 09, 2012 July 09, 2012 CALIBRATED UNTIL July 08, 2013 July 08, 2013 July 08, 2013 MY48250254 MY46520311 MY49060517 AMP-ZFL-03 Nov. 15, 2011 Nov. 14, 2012 3008A02578 June 26, 2012 June 25, 2013 E4446A N9039A N5181A ZFL-1000VH2 B 8449B SLKKa-48-6 9K16 Nov. 15, 2011 Nov. 14, 2012 VULB 9168 9168-360 Apr. 09, 2012 Apr. 08, 2013 AIH.8018 0000320091110 Nov. 14, 2011 Nov. 13, 2012 BBHA 9170 9170-424 Oct. 07, 2011 Oct. 06, 2012 NA NA ADT_Radiated _V8.7.05 RF104-201 RF104-203 RF104-204 CHGCAB_001 Oct. 07, 2011 Oct. 06, 2012 Dec. 26, 2011 Dec. 25, 2012 NA NA NA NA NA NA Antenna Tower & Turn Table CT Note:
NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3 The test was performed in 966 Chamber No. G. 4. The FCC Site Registration No. is 966073. 5 The VCCI Site Registration No. is G-137. 6 The CANADA Site Registration No. is IC 7450H-2. 7 Tested Date: July 13, 2012 Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 22 of 49 Report Format Version 5.0.0 For Above 1GHz test:
DESCRIPTION &
MANUFACTURER Spectrum Analyzer Agilent Pre-Selector Agilent Signal Generator Agilent Pre-Amplifier Mini-Circuits Pre-Amplifier Agilent SPACEK LABS Trilog Broadband Antenna SCHWARZBECK Horn_Antenna AISI Horn_Antenna SCHWARZBECK RF Cable RF Cable Software Antenna Tower & Turn Table CT Note:
MODEL NO. E4446A N9039A N5181A ZFL-1000VH2 B 8449B SLKKa-48-6 VULB 9168 AIH.8018 BBHA 9170 NA NA ADT_Radiated _V8.7.05 NA DATE July 25, 2012 CALIBRATED UNTIL SERIAL NO. CALIBRATED MY48250253 Aug. 29, 2011 Aug. 28, 2012 MY46520310 Aug. 29, 2011 Aug. 28, 2012 MY49060347 July 24, 2013 AMP-ZFL-04 Nov. 15, 2011 Nov. 14, 2012 3008A02465 Feb. 27, 2012 Feb. 26, 2013 Nov. 15, 2011 Nov. 14, 2012 9K16 9168-361 Apr. 06, 2012 Apr. 05, 2013 0000220091110 Nov. 23, 2011 Nov. 22, 2012 Oct. 07, 2011 Oct. 06, 2012 9170-424 RF104-205 RF104-207 RF104-202 CHHCAB_001 Oct. 08, 2011 Oct. 07, 2012 Dec. 27, 2011 Dec. 26, 2012 NA NA NA NA NA NA 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3 The test was performed in 966 Chamber No. H. 4. The FCC Site Registration No. is 797305. 5 The CANADA Site Registration No. is IC 7450H-3. 6 Tested Date: Aug. 01, 2012 Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 23 of 49 Report Format Version 5.0.0 TEST PROCEDURES 4.2.3 a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at 3 meters chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. NOTE:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 10 Hz for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.2.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 24 of 49 Report Format Version 5.0.0 4.2.5 TEST SETUP EUT&
Support Units 80cm Ant. Tower 3m 3m-above 1GHz Turn Table Ground Plane Test Receiver 1 - 4m Variable For the actual test configuration, please refer to the related item Photographs of the Test Configuration. 4.2.6 EUT OPERATING CONDITIONS Same as 4.1.6 Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 25 of 49 Report Format Version 5.0.0 4.2.7 TEST RESULTS BELOW 1GHz WORST-CASE DATA 802.11g CHANNEL TX Channel 6 FREQUENCY RANGE Below 1GHz DETECTOR FUNCTION Quasi-Peak (QP)
(dB) LIMIT MARGIN
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 172 153 212 172 206 202 43.5 46.0 46.0 46.0 46.0 46.0
-12.3
-16.8
-15.8
-14.9
-15.6
-12.3
(m) 1.50 H 1.50 H 1.00 H 1.50 H 1.50 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION VALUE LEVEL
(dBuV)
(dBuV/m) 17.27 31.2 QP 17.11 29.3 QP 14.76 30.2 QP 11.40 31.1 QP 8.93 30.4 QP 33.7 QP 9.11 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 14.75 17.44 12.48 6.65 4.39 3.41 LEVEL
(dBuV/m) 28.7 QP 29.2 QP 27.9 QP 28.3 QP 27.5 QP 29.3 QP
(m) 1.00 V 1.00 V 1.50 V 1.00 V 1.50 V 2.00 V
-14.8
-14.3
-18.1
-17.7
-18.6
-16.7 43.5 43.5 46.0 46.0 46.0 46.0 209 345 59 92 350 360 TABLE ANGLE
(Degree) ANTENNA HEIGHT
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 13.96 12.14 15.45 19.68 21.47 24.57 CORRECTION FACTOR
(dB/m) 13.93 11.78 15.41 21.65 23.06 25.88 NO. 1 2 3 4 5 6 FREQ.
(MHz) 165.95 222.44 306.16 471.60 546.20 732.25 NO. FREQ.
(MHz) 1 2 3 4 5 6 166.42 214.27 304.74 553.90 631.94 797.97 REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 26 of 49 Report Format Version 5.0.0 ABOVE 1GHz DATA 802.11b CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN 74.0 54.0 74.0 54.0
(dBuV/m)
-16.4
-8.9 ANTENNA HEIGHT TABLE ANGLE
(Degree) 236 236 236 236 138 138
(m) 1.32 H 1.32 H 1.32 H 1.32 H 1.10 H 1.10 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION VALUE LEVEL
(dBuV)
(dBuV/m) 25.22 57.6 PK 12.72 45.1 AV 74.26 106.7 PK 71.86 104.3 AV 11.06 53.0 PK 46.2 AV 4.26 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 25.02 12.22 68.06 65.56 8.86
-1.44 LEVEL
(dBuV/m) 57.4 PK 44.6 AV 100.5 PK 98.0 AV 50.8 PK 40.5 AV
(m) 1.00 V 1.00 V 1.00 V 1.00 V 1.35 V 1.35 V 171 171 171 171 108 108 TABLE ANGLE
(Degree) ANTENNA HEIGHT
-21.0
-7.8
-16.6
-9.4
-23.2
-13.5
(dBuV/m) 74.0 54.0 74.0 54.0 MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 32.38 32.38 32.44 32.44 41.94 41.94 CORRECTION FACTOR
(dB/m) 32.38 32.38 32.44 32.44 41.94 41.94 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value. 5. " * ": Fundamental frequency. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 27 of 49 Report Format Version 5.0.0 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-19.1
-4.6
-20.9
-13.7 TABLE ANGLE
(Degree) 278 278 130 130 54 54
(m) 1.37 H 1.37 H 1.07 H 1.07 H 1.00 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION VALUE LEVEL
(dBuV)
(dBuV/m) 76.59 109.1 PK 73.99 106.5 AV 12.91 54.9 PK 7.41 49.4 AV 6.57 53.1 PK 40.3 AV
-6.23 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 70.09 67.89 12.81 6.91 7.47
-6.13 LEVEL
(dBuV/m) 102.6 PK 100.4 AV 54.8 PK 48.9 AV 54.0 PK 40.4 AV
(m) 1.00 V 1.00 V 1.28 V 1.28 V 1.00 V 1.00 V 166 166 95 95 113 113 TABLE ANGLE
(Degree)
-19.2
-5.1
-20.0
-13.6 ANTENNA HEIGHT 74.0 54.0 74.0 54.0
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 32.51 32.51 41.99 41.99 46.53 46.53 CORRECTION FACTOR
(dB/m) 32.51 32.51 41.99 41.99 46.53 46.53 NO. FREQ.
(MHz) 1 2 3 4 5 6
*2437.00
*2437.00 4874.00 4874.00 7311.00 7311.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*2437.00
*2437.00 4874.00 4874.00 7311.00 7311.00 REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value. 5. " * ": Fundamental frequency. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 28 of 49 Report Format Version 5.0.0 CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-14.7
-4.9
-16.7
-3.5
-20.4
-13.3 293 293 293 293 138 138 44 44
(m) 1.31 H 1.31 H 1.31 H 1.31 H 1.21 H 1.21 H 1.00 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION VALUE LEVEL
(dBuV)
(dBuV/m) 76.23 108.8 PK 73.83 106.4 AV 26.67 59.3 PK 16.47 49.1 AV 15.29 57.3 PK 8.49 50.5 AV 6.87 53.6 PK 40.7 AV
-6.03 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 69.83 67.53 25.57 15.47 14.79 8.09 6.37
-6.23 LEVEL
(dBuV/m) 102.4 PK 100.1 AV 58.2 PK 48.1 AV 56.8 PK 50.1 AV 53.1 PK 40.5 AV
(m) 1.01 V 1.01 V 1.01 V 1.01 V 1.26 V 1.26 V 1.00 V 1.00 V 168 168 168 168 96 96 125 125
-15.8
-5.9
-17.2
-3.9
-20.9
-13.5 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 32.57 32.57 32.63 32.63 42.01 42.01 46.73 46.73 CORRECTION FACTOR
(dB/m) 32.57 32.57 32.63 32.63 42.01 42.01 46.73 46.73 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value. 5. " * ": Fundamental frequency. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 29 of 49 Report Format Version 5.0.0 802.11g CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN 74.0 54.0 74.0 54.0
(dBuV/m)
-14.2
-7.8 ANTENNA HEIGHT TABLE ANGLE
(Degree) 248 248 248 248 122 122
(m) 1.28 H 1.28 H 1.28 H 1.28 H 1.00 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW VALUE LEVEL
(dBuV)
(dBuV/m) 27.42 59.8 PK 13.82 46.2 AV 69.56 102.0 PK 58.26 90.7 AV 7.86 49.8 PK 38.8 AV
-3.14 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 26.02 12.32 65.16 52.46 7.76
-3.24 LEVEL
(dBuV/m) 58.4 PK 44.7 AV 97.6 PK 84.9 AV 49.7 PK 38.7 AV
(m) 1.05 V 1.05 V 1.05 V 1.05 V 1.25 V 1.25 V TABLE ANGLE
(Degree) 178 178 178 178 96 96 ANTENNA HEIGHT
-24.2
-15.2
-15.6
-9.3
-24.3
-15.3
(dBuV/m) 74.0 54.0 74.0 54.0 MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 32.38 32.38 32.44 32.44 41.94 41.94 CORRECTION FACTOR
(dB/m) 32.38 32.38 32.44 32.44 41.94 41.94 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value. 5. " * ": Fundamental frequency. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 30 of 49 Report Format Version 5.0.0 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-23.7
-15.0
-20.3
-13.7 TABLE ANGLE
(Degree) 249 249 122 122 39 39
(m) 1.33 H 1.33 H 1.00 H 1.00 H 1.00 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION VALUE LEVEL
(dBuV)
(dBuV/m) 78.09 110.6 PK 66.59 99.1 AV 8.31 50.3 PK
-2.99 39.0 AV 7.17 53.7 PK 40.3 AV
-6.23 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 71.19 60.19 8.11
-3.19 7.07
-6.33 LEVEL
(dBuV/m) 103.7 PK 92.7 AV 50.1 PK 38.8 AV 53.6 PK 40.2 AV
(m) 1.05 V 1.05 V 1.30 V 1.30 V 1.05 V 1.05 V 185 185 96 96 112 112 TABLE ANGLE
(Degree)
-23.9
-15.2
-20.4
-13.8 ANTENNA HEIGHT 74.0 54.0 74.0 54.0
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 32.51 32.51 41.99 41.99 46.53 46.53 CORRECTION FACTOR
(dB/m) 32.51 32.51 41.99 41.99 46.53 46.53 NO. FREQ.
(MHz) 1 2 3 4 5 6
*2437.00
*2437.00 4874.00 4874.00 7311.00 7311.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*2437.00
*2437.00 4874.00 4874.00 7311.00 7311.00 REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value. 5. " * ": Fundamental frequency. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 31 of 49 Report Format Version 5.0.0 CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-11.9
-8.0
-23.6
-14.8
-20.2
-12.3 252 252 252 252 146 146 38 38
(m) 1.31 H 1.31 H 1.31 H 1.31 H 1.24 H 1.24 H 1.00 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION VALUE LEVEL
(dBuV)
(dBuV/m) 70.73 103.3 PK 59.63 92.2 AV 29.47 62.1 PK 13.37 46.0 AV 8.39 50.4 PK
-2.81 39.2 AV 7.07 53.8 PK 41.7 AV
-5.03 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 63.93 52.13 25.67 12.47 7.99
-3.11 7.27
-5.13 LEVEL
(dBuV/m) 96.5 PK 84.7 AV 58.3 PK 45.1 AV 50.0 PK 38.9 AV 54.0 PK 41.6 AV
(m) 1.02 V 1.02 V 1.02 V 1.02 V 1.31 V 1.31 V 1.03 V 1.03 V 177 177 177 177 84 84 120 120
-15.7
-8.9
-24.0
-15.1
-20.0
-12.4 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 32.57 32.57 32.63 32.63 42.01 42.01 46.73 46.73 CORRECTION FACTOR
(dB/m) 32.57 32.57 32.63 32.63 42.01 42.01 46.73 46.73 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value. 5. " * ": Fundamental frequency. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 32 of 49 Report Format Version 5.0.0 802.11n (HT20) CHANNEL TX Channel 1 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN 74.0 54.0 74.0 54.0
(dBuV/m)
-16.5
-7.6 ANTENNA HEIGHT TABLE ANGLE
(Degree) 236 236 236 236 156 156
(m) 1.32 H 1.32 H 1.32 H 1.32 H 1.17 H 1.17 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION RAW VALUE LEVEL
(dBuV)
(dBuV/m) 25.12 57.5 PK 14.02 46.4 AV 70.96 103.4 PK 58.26 90.7 AV 8.66 50.6 PK 39.2 AV
-2.74 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 25.12 12.42 64.86 52.36 8.16
-2.74 LEVEL
(dBuV/m) 57.5 PK 44.8 AV 97.3 PK 84.8 AV 50.1 PK 39.2 AV
(m) 1.00 V 1.00 V 1.00 V 1.00 V 1.30 V 1.30 V TABLE ANGLE
(Degree) 169 169 169 169 99 99 ANTENNA HEIGHT
-23.4
-14.8
-16.5
-9.2
-23.9
-14.8
(dBuV/m) 74.0 54.0 74.0 54.0 MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 32.38 32.38 32.44 32.44 41.94 41.94 CORRECTION FACTOR
(dB/m) 32.38 32.38 32.44 32.44 41.94 41.94 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 2390.00 2390.00
*2412.00
*2412.00 4824.00 4824.00 REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value. 5. " * ": Fundamental frequency. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 33 of 49 Report Format Version 5.0.0 CHANNEL TX Channel 6 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) 74.0 54.0 74.0 54.0 ANTENNA HEIGHT
-23.7
-14.9
-20.5
-13.4 TABLE ANGLE
(Degree) 238 238 161 161 33 33
(m) 1.31 H 1.31 H 1.22 H 1.22 H 1.00 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION VALUE LEVEL
(dBuV)
(dBuV/m) 77.09 109.6 PK 63.79 96.3 AV 8.31 50.3 PK
-2.89 39.1 AV 6.97 53.5 PK 40.6 AV
-5.93 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M RAW EMISSION VALUE
(dBuV) 67.29 57.89 8.11
-2.89 6.47
-5.93 LEVEL
(dBuV/m) 99.8 PK 90.4 AV 50.1 PK 39.1 AV 53.0 PK 40.6 AV
(m) 1.06 V 1.06 V 1.23 V 1.23 V 1.00 V 1.00 V 162 162 81 81 140 140 TABLE ANGLE
(Degree)
-23.9
-14.9
-21.0
-13.4 ANTENNA HEIGHT 74.0 54.0 74.0 54.0
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 32.51 32.51 41.99 41.99 46.53 46.53 CORRECTION FACTOR
(dB/m) 32.51 32.51 41.99 41.99 46.53 46.53 NO. FREQ.
(MHz) 1 2 3 4 5 6
*2437.00
*2437.00 4874.00 4874.00 7311.00 7311.00 NO. FREQ.
(MHz) 1 2 3 4 5 6
*2437.00
*2437.00 4874.00 4874.00 7311.00 7311.00 REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value. 5. " * ": Fundamental frequency. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 34 of 49 Report Format Version 5.0.0 CHANNEL TX Channel 11 FREQUENCY RANGE 1GHz ~ 25GHz DETECTOR FUNCTION Peak (PK) Average (AV)
(dB) LIMIT MARGIN
(dBuV/m) ANTENNA HEIGHT TABLE ANGLE
(Degree) 74.0 54.0 74.0 54.0 74.0 54.0
-10.8
-7.0
-23.6
-15.0
-20.4
-13.7 237 237 237 237 151 151 44 44
(m) 1.29 H 1.29 H 1.29 H 1.29 H 1.22 H 1.22 H 1.00 H 1.00 H ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M RAW EMISSION VALUE LEVEL
(dBuV)
(dBuV/m) 73.03 105.6 PK 59.73 92.3 AV 30.57 63.2 PK 14.37 47.0 AV 8.39 50.4 PK
-3.01 39.0 AV 6.87 53.6 PK 40.3 AV
-6.43 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION RAW VALUE
(dBuV) 64.13 52.03 25.27 11.97 8.29
-2.81 10.87
-6.33 LEVEL
(dBuV/m) 96.7 PK 84.6 AV 57.9 PK 44.6 AV 50.3 PK 39.2 AV 57.6 PK 40.4 AV
(m) 1.05 V 1.05 V 1.05 V 1.05 V 1.28 V 1.28 V 1.02 V 1.02 V 166 166 166 166 93 93 137 137
-16.1
-9.4
-23.7
-14.8
-16.4
-13.6 74.0 54.0 74.0 54.0 74.0 54.0 TABLE ANGLE
(Degree) ANTENNA HEIGHT
(dBuV/m) MARGIN LIMIT
(dB) CORRECTION FACTOR
(dB/m) 32.57 32.57 32.63 32.63 42.01 42.01 46.73 46.73 CORRECTION FACTOR
(dB/m) 32.57 32.57 32.63 32.63 42.01 42.01 46.73 46.73 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 NO. FREQ.
(MHz) 1 2 3 4 5 6 7 8
*2462.00
*2462.00 2483.50 2483.50 4924.00 4924.00 7386.00 7386.00 REMARKS:
1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level Limit value. 5. " * ": Fundamental frequency. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 35 of 49 Report Format Version 5.0.0 4.3 6dB BANDWIDTH MEASUREMENT LIMITS OF 6dB BANDWIDTH MEASUREMENT 4.3.1 The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.3.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER R&S SPECTRUM ANALYZER Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSP40 100036 Dec. 14, 2011 Dec. 13, 2012 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 18, 2012 TEST PROCEDURE 4.3.3 1. Set resolution bandwidth (RBW) = approximately 1% of the emission bandwidth 2. Set the video bandwidth (VBW) 3 x RBW, Detector = Peak. 3. Trace mode = max hold. 4. Sweep = auto couple. 5. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.3.4 DEVIATION FROM TEST STANDARD No deviation TEST SETUP EUT 4.3.5 SPECTRUM ANALYZER 10dB ATTENUATION PAD 4.3.6 EUT OPERATING CONDITIONS The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 36 of 49 Report Format Version 5.0.0 4.3.7 TEST RESULTS 802.11b CHANNEL FREQUENCY
(MHz) 1 6 11 802.11g 2412 2437 2462 CHANNEL FREQUENCY
(MHz) 1 6 11 2412 2437 2462 802.11n (HT20) CHANNEL FREQUENCY
(MHz) 1 6 11 2412 2437 2462 6dB BANDWIDTH (MHz) CHAIN 0 CHAIN 1 10.77 10.74 10.43 10.75 10.74 10.54 MINIMUM LIMIT (MHz) PASS / FAIL 0.5 0.5 0.5 PASS PASS PASS 6dB BANDWIDTH (MHz) CHAIN 0 CHAIN 1 16.57 16.55 16.54 16.53 16.56 16.51 MINIMUM LIMIT (MHz) PASS / FAIL 0.5 0.5 0.5 PASS PASS PASS 6dB BANDWIDTH (MHz) CHAIN 0 CHAIN 1 17.78 17.76 17.73 17.77 17.76 17.76 MINIMUM LIMIT (MHz) PASS / FAIL 0.5 0.5 0.5 PASS PASS PASS Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 37 of 49 Report Format Version 5.0.0 4.4 CONDUCTED OUTPUT POWER MEASUREMENT 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT For systems using digital modulation in the 24002483.5 MHz band: 1 Watt
(30dBm) 4.4.2 INSTRUMENTS DESCRIPTION &
MANUFACTURER Power Meter Peak Power Sensor MODEL NO. ML2495A MA2411B SERIAL NO. 0824006 0738172 CALIBRATED DATE May 10, 2012 May 10, 2012 CALIBRATED UNTIL May 09, 2013 May 09, 2013 Note:
1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 18, 2012 TEST PROCEDURES 4.4.3 A peak power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak power sensor. Record the peak power level. 4.4.4 DEVIATION FROM TEST STANDARD No deviation 4.4.5 4.4.6 EUT OPERATING CONDITIONS Same as Item 4.3.6 10dB ATTENUATION PAD Peak Power Sensor TEST SETUP Power Meter EUT Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 38 of 49 Report Format Version 5.0.0 4.4.7 802.11b CHAN. TEST RESULTS FREQUE NCY
(MHz) PEAK POWER (dBm) CHAIN 0 CHAIN 1 TOTAL POWER
(mW) TOTAL POWER
(dBm) 1 6 2412 2437 16.10 17.00 17.70 17.40 99.622 19.98 105.073 20.21 11 2462 16.30 17.40 Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2]
Effective Legacy Gain (dBi) = 4.39 The effective legacy gain is 4.39dBi, therefore the limit doesnt reduce. 97.612 19.90 LIMIT
(dBm) PASS /
FAIL 30 30 30 PASS PASS PASS 802.11g CHAN. FREQUE NCY
(MHz) PEAK POWER (dBm) CHAIN 0 CHAIN 1 TOTAL POWER
(mW) TOTAL POWER
(dBm) LIMIT
(dBm) PASS /
FAIL 1 6 2412 2437 18.40 21.70 19.50 21.60 158.308 22.00 292.455 24.66 11 2462 17.60 18.50 Directional gain = 10 log[(10G1/20 + 10G2/20)2 / 2]
Effective Legacy Gain (dBi) = 4.39 The effective legacy gain is 4.39dBi, therefore the limit doesnt reduce. 128.339 21.08 30 30 30 PASS PASS PASS 802.11n (HT20) CHAN. FREQUE NCY
(MHz) 2412 2437 2462 1 6 11 PEAK POWER (dBm) CHAIN 0 CHAIN 1 16.70 21.20 16.40 18.90 21.60 17.70 TOTAL POWER
(mW) TOTAL POWER
(dBm) 124.399 20.95 276.370 24.41 102.536 20.11 LIMIT
(dBm) PASS /
FAIL 30 30 30 PASS PASS PASS Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 39 of 49 Report Format Version 5.0.0 4.5 POWER SPECTRAL DENSITY MEASUREMENT LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT 4.5.1 The Maximum of Power Spectral Density Measurement is 8dBm. 4.5.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER R&S Spectrum Analyzer Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSP40 100036 Dec. 14, 2011 Dec. 13, 2012 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 18, 2012 4.5.3 TEST PROCEDURE 1. Set the RBW = 100 kHz, VBW =300 kHz, Detector = peak. 2. Sweep time = auto couple, Trace mode = max hold, allow trace to fully stabilize. 3. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. 4. Scale the observed power level to an equivalent value in 3 kHz by adjusting (reducing) the measured power by a bandwidth correction factor
(BWCF) where BWCF = 10log(3 kHz/100kHz) TEST SETUP 4.5.4 DEVIATION FROM TEST STANDARD No deviation 4.5.5 4.5.6 EUT OPERATING CONDITION Same as Item 4.3.6 10dB ATTENUATION PAD EUT SPECTRUM ANALYZER Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 40 of 49 Report Format Version 5.0.0 4.6 CONDUCTED OUT-BAND EMISSION MEASUREMENT LIMITS OF CONDUCTED OUT-BAND EMISSION MEASUREMENT 4.6.1 Below 20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.6.2 TEST INSTRUMENTS DESCRIPTION &
MANUFACTURER R&S Spectrum Analyzer Note:
MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL FSP40 100036 Dec. 14, 2011 Dec. 13, 2012 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : July 18, 2012 TEST PROCEDURE 4.6.3 MEASUREMENT PROCEDURE REF 1. Set the RBW = 100 kHz. 2. Set the VBW 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 42 of 49 Report Format Version 5.0.0 MEASUREMENT PROCEDURE OOBE 1. Set RBW = 100 kHz. 2. Set VBW 300 kHz. 3. Set span to encompass the spectrum to be examined 4. Detector = peak. 5. Trace Mode = max hold. 6. Sweep = auto couple. 4.6.4 DEVIATION FROM TEST STANDARD No deviation TEST SETUP 4.6.5 4.6.6 EUT OPERATING CONDITION EUT 10dB ATTENUATION PAD SPECTRUM ANALYZER Same as Item 4.3.6 4.6.7 TEST RESULTS The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 43 of 49 Report Format Version 5.0.0 802.11b CH 1 CH 6 CH 11 Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 44 of 49 Report Format Version 5.0.0 802.11g CH 1 CH 6 CH 11 Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 45 of 49 Report Format Version 5.0.0 802.11n (HT20) CH 1 CH 6 CH 11 Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 46 of 49 Report Format Version 5.0.0 5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 47 of 49 Report Format Version 5.0.0 6. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following:
Linko EMC/RF Lab:
Tel: 886-2-26052180 Fax: 886-2-26052943 Hwa Ya EMC/RF/Safety/Telecom Lab:
Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.adt.com.tw Hsin Chu EMC/RF Lab:
Tel: 886-3-5935343 Fax: 886-3-5935342 The address and road map of all our labs can be found in our web site also. Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 48 of 49 Report Format Version 5.0.0 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No modifications were made to the EUT by the lab during the test.
--- END ---
Report No.: RF120709E02 Reference No.: 110719E01, 120110E14 49 of 49 Report Format Version 5.0.0
1 | Test Setup Photos | Test Setup Photos | 339.49 KiB | July 09 2012 / February 01 2013 |
PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: 120706E03 1 of 3 RADIATED EMISSION TEST Report No.: 120706E03 2 of 3 Report No.: 120706E03 3 of 3
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-09-07 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2012-09-07
|
||||
1 | Applicant's complete, legal business name |
HON HAI Precision Ind. Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0010777365
|
||||
1 | Physical Address |
5F-1, 5, Hsin-An Road Hsinchu Science-Based Industrial Park
|
||||
1 |
5F-1, 5, Hsin-An Road
|
|||||
1 |
Hsinchu, N/A
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@curtis-straus.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
MCL
|
||||
1 | Equipment Product Code |
J20H069
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M**** C****
|
||||
1 | Title |
Compliance Deputy Manager
|
||||
1 | Telephone Number |
+886-********
|
||||
1 | Fax Number |
+886-********
|
||||
1 |
r******@foxconn.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
||||
1 | Name |
H******** C********
|
||||
1 | Physical Address |
81-1, Lu Laio Keng, 9th Ling, Wu Lung Tsuen, Chiun
|
||||
1 |
Hsinchu Hsien, 307
|
|||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
h******@tw.bureauveritas.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
||||
1 | Name |
C**** C********
|
||||
1 | Physical Address |
No. 19, Hwa Ya 2nd Rd., Kwei Shan Hsiang
|
||||
1 |
Taoyuan Hsien, 333
|
|||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
c******@tw.bureauveritas.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/02/2013 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wi-Fi Module | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Single Modular Approval | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
||||
1 | Name |
R****** C********
|
||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886 3********
|
||||
1 |
r******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | MO | 2412.00000000 | 2462.00000000 | 0.2920000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC