FCC ID: 2AQ68T99W373M 5G WWAN Module

nl eoxconne nl eoxconne nl eoxconne nl eoxconne nl eoxconne nl eoxconne nl eoxconne nl eoxconne nl eoxconne

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6202518.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Product Feature and Specification EUT Type Brand Name Model Name FCC ID Wireless Technology and Frequency Range Mode Product Feature & Specification 5G WWAN Module Foxconn T99W368M T99W368 T99W373M T99W373 2AQ68T99W368M 2AQ68T99W368 2AQ68T99W373M 2AQ68T99W373

WCDMA Band II: 1850 MHz ~ 1910 MHz WCDMA Band IV: 1710 MHz ~ 1755 MHz WCDMA Band V: 824 MHz ~ 849 MHz LTE Band 2: 1850 MHz ~ 1910 MHz

LTE Band 4: 1710 MHz ~ 1755 MHz LTE Band 5: 824 MHz ~ 849 MHz LTE Band 7: 2500 MHz ~ 2570 MHz

LTE Band 12: 699 MHz ~ 716 MHz LTE Band 13: 777 MHz ~ 787 MHz LTE Band 14: 788 MHz ~ 798 MHz LTE Band 17: 704 MHz ~ 716 MHz

LTE Band 25: 1850 MHz ~ 1915 MHz LTE Band 26: 814 MHz ~ 849 MHz

LTE Band 29: 717 MHz ~ 728 MHz *(DL only) LTE Band 30: 2305 MHz ~ 2315 MHz

LTE Band 38: 2570 MHz ~ 2620 MHz LTE Band 41: 2496 MHz ~ 2690 MHz

LTE Band 42: 3450 MHz ~ 3550 MHz, 3550 MHz ~ 3600 MHz LTE Band 43: 3600 MHz ~ 3700 MHz

LTE Band 46: 5150 MHz ~ 5925 MHz (DL only) LTE Band 48: 3550 MHz ~ 3700 MHz

LTE Band 66: 1710 MHz ~ 1780 MHz LTE Band 71: 663 MHz ~ 698 MHz 5G NR n2 : 1850 MHz ~ 1910 MHz 5G NR n5 : 824 MHz ~ 849 MHz 5G NR n7 : 2500 MHz ~ 2570 MHz 5G NR n12 : 699 MHz ~ 716 MHz 5G NR n13: 777 MHz ~ 787 MHz 5G NR n14 : 788 MHz ~ 798 MHz 5G NR n25 : 1850 MHz ~ 1915 MHz

5G NR n26 : 814 MHz ~ 849 MHz 5G NR n30 : 2305 MHz ~ 2315 MHz

5G NR n38 : 2570 MHz ~ 2620 MHz 5G NR n41 : 2496 MHz ~ 2690 MHz

5G NR n48: 3550 MHz ~ 3700 MHz 5G NR n66 : 1710 MHz ~ 1780 MHz

5G NR n70 : 1695 MHz ~ 1710 MHz 5G NR n71 : 663 MHz ~ 698 MHz 5G NR n77 : 3450 MHz ~ 3550 MHz, 3550 MHz ~ 3700 MHz, 3700 MHz ~ 3980 MHz 5G NR n78 : 3450 MHz ~ 3550 MHz, 3550 MHz ~ 3700 MHz, 3700 MHz ~ 3800 MHz RMC/AMR 12.2Kbps HSDPA HSUPA DC-HSDPA HSPA+ (16QAM uplink) LTE: QPSK, 16QAM, 64QAM, 256QAM 5G NR: DFT-s-OFDM/CP-OFDM, Pi/2 BPSK/QPSK/16QAM/64QAM/256QAM

Maximum Antenna gain and Collocated Allowed Antenna gain Based on FCC 47 CFR 1.1307, the analysis concludes that this product when transmitting in standalone within a host device, is compliant with the FCC RF exposure requirements in mobile exposure condition, provided the conducted power and antenna gain do not exceed the limits for each given frequency band per wireless technology as follow table:

Devoce Technology Band T99W368M T99W368 T99W373M T99W373 UMTS LTE 5G NR WCDMA Band 2 WCDMA Band 4 WCDMA Band 5 LTE Band 2 LTE Band 4 LTE Band 5 LTE Band 7 LTE Band 12 LTE Band 13 LTE Band 14 LTE Band 17 LTE Band 25 LTE Band 26 LTE Band 30 LTE Band 38 LTE Band 41_PC3 LTE Band 41_PC2 LTE Band 42 (3450~3550MHz) LTE Band 42 (3550~3600MHz) LTE Band 43 LTE Band 48 LTE Band 66 LTE Band 71 5G NR n2 5G NR n5 5G NR n7 5G NR n12 5G NR n13 5G NR n14 5G NR n25 5G NR n26 5G NR n30 5G NR n38 5G NR n41_PC3 5G NR n41_PC2 5G NR n41_PC2 5G NR n48 5G NR n48 5G NR n66 5G NR n70 5G NR n71 5G NR n77 (3450~3550MHz)

(3700~3980MHz) 5G NR n77 (3550~3700MHz) 5G NR n78 (3450~3550MHz)

(3700~3800MHz) 5G NR n78 (3550~3700MHz)

Maximum

Conducted Power (dBm)

24.50

24.50

24.50 24.00

24.00

24.50 24.00

24.50 24.50

24.50

24.50 24.00

24.50

23.00 24.00

24.00

27.00 24.00

22.00

22.00 22.00

24.00

24.00 24.00

24.00

24.00 24.00

24.00

24.00 24.00

24.00 23.00 24.00 24.00 27.00 27.00 22.00 22.00 24.00 24.00 24.00 27.00 22.00 27.00 22.00 Stanalone Allow Antenna Gain (dBi) Collocated Allow Antenna Gain (dBi) 5.90 5.50 3.50 5.90 5.50 3.50 4.30 3.10 3.40 3.40 3.00 5.90 3.50 0.98 4.30 4.30 4.30 6.00 1.00 1.00 1.00 5.50 3.40 5.90 3.50 4.30 3.10 3.40 3.40 5.90 3.50 0.98 4.30 4.30 4.304.30 1.001.00 5.50 6.00 3.40 3.00 1.00 3.00 1.00 5.20 5.00 2.80 5.20 5.00 2.80 3.60 2.30 2.60 2.70 2.30 5.20 2.80 0.98 3.60 3.60 3.60 6.00 1.00 1.00 1.00 5.00 2.70 5.20 2.80 3.60 2.30 2.60 2.70 5.20 2.80 0.98 3.60 3.60 3.603.60 1.001.00 5.00 5.50 2.70 3.00 1.00 3.00 1.00 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm

between the radiator & your body.

This module is intended for OEM integrators only. Per FCC KDB 996369 D03 OEM Manual v01 guidance, the following conditions must be strictly followed when using this certified module:

KDB 996369 D03 OEM Manual v01 rule sections:

2.2 List of applicable FCC rules This module has been tested for compliance to FCC Part 22, 24, 27, 90, 96. 1.1 Summarize the specific operational use conditions The module is tested for standalone mobile RF exposure use condition. Any other usage conditions such as co-location with other transmitter(s) or being used in a portable condition will need a separate reassessment through a class II permissive change application or new certification. 1.2 Limited module procedures Not applicable. 1.3 Trace antenna designs Not applicable. 1.4 RF exposure considerations

This equipment complies with FCC mobile radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. If the module is installed in a portable host, a separate SAR evaluation is required to confirm compliance with relevant FCC portable RF exposure rules. 1.5 Antennas Antennas with equal or lower gain may also be used with this module. The antenna must be installed such that 20 cm can be maintained between the antenna and users. 1.6 Label and compliance information The final end product must be labeled in a visible area with the

"Contains FCC ID: 2AQ68T99W368M / "Contains FCC ID: 2AQ68T99W368" /

"Contains FCC ID: 2AQ68T99W373M / "Contains FCC ID: 2AQ68T99W373."

The grantee FCC ID can be used only when all FCC compliance requirements are met.

1.7 Information on test modes and additional testing requirements

This transmitter is tested in a standalone mobile RF exposure condition and any

co-located or simultaneous transmission with other transmitter(s) or portable use will require a separate class II permissive change re-evaluation or new certification. 1.8 Additional testing, Part 15 Subpart B disclaimer This transmitter module is tested as a subsystem and its certification does not cover the FCC Part 15 Subpart B (unintentional radiator) rule requirement applicable to the final host. The final host will still need to be reassessed for compliance to this portion of rule requirements if applicable. As long as all conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed.

IMPORTANT NOTE: In the event that these conditions can not be met (for example certain

laptop configurations or co-location with another transmitter), then the FCC authorization is

no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product

(including the transmitter) and obtaining a separate FCC authorization. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module.

The end user manual shall include all required regulatory information/warning as show in

this manual. OEM/Host manufacturer responsibilities OEM/Host manufacturers are ultimately responsible for the compliance of the Host and

Module. The final product must be reassessed against all the essential requirements of the

FCC rule such as FCC Part 15 Subpart B before it can be placed on the US market. This

includes reassessing the transmitter module for compliance with the Radio and EMF essential requirements of the FCC rules. This module must not be incorporated into any other device or system without retesting for compliance as multi-radio and combined equipment

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6717552.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Hon Lin Technology Co., Ltd. 11F, No.32, Jihu Rd., Neihu Dist., Taipei City, Taiwan 114 Tel: + 886 2 2267 6511 ; Fax: + 886 2 2267 6512 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 12, 2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AQ68T99W373M Hon Lin Technology Co., Ltd. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, ___________________ Nancy Lin nancy.lin@foxconn.com Rev 1/26/2023 Hon Lin Technology Co., Ltd. 11F, No.32, Jihu Rd., Neihu Dist., Taipei City, Taiwan 114 Tel: + 886 2 2267 6511 ; Fax: + 886 2 2267 6512 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 3, 2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AQ68T99W373M Hon Lin Technology Co., Ltd. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely, ___________________ Nancy Lin nancy.lin@foxconn.com

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6724192.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Hon Lin Technology Co., Ltd. 11F, No.32, Jihu Rd., Neihu Dist., Taipei City, Taiwan 114 Tel: + 886 2 2267 6511 ; Fax: + 886 2 2267 6512 Date: August 9, 2023 FCC Laboratory 7435 Oakland Mills Rd Columbia MD 2104 SUBJECT: Class II Permissive Change for FCC ID: 2AQ68T99W373M, approval date: 11/22/2022 Dear Examiner, This is to request a Class II Permissive Change application for above referenced device. The software change filed under this application are:

1. Add Inter Band CA combinations: NR n5+n78, NR n78+n5 2. Add EN-DC combinations: LTE Band 4+NR n7, LTE Band 26+NR n25, LTE Band 2+ NR n48, LTE Band 5+ NR n48, LTE Band 13+ NR n48, LTE Band 66+ NR n48. Except the change described above, the design and hardware are exactly the same with original. Sincerely, Nancy Lin nancy.lin@foxconn.com

Hon Lin Technology Co., Ltd. 11F, No.32, Jihu Rd., Neihu Dist., Taipei City, Taiwan 114 Tel: + 886 2 2267 6511 ; Fax: + 886 2 2267 6512 Date: July 12, 2023 FCC Laboratory 7435 Oakland Mills Rd Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2AQ68T99W373M To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following documents from public disclosure indefinitely. Operational Description Tune-up Procedure Above mentioned documents which contain detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we are requesting the Commission to withhold the following documents for 180 days after the grant of equipment authorization is issued:

Test Setup Photos It is our understanding that all measurement test reports, FCC ID label format cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, _______________________ Nancy Lin nancy.lin@foxconn.com

Hon Lin Technology Co., Ltd. 11F, No.32, Jihu Rd., Neihu Dist., Taipei City, Taiwan 114 Tel: + 886 2 2267 6511 ; Fax: + 886 2 2267 6512 FCC Agent Authorization Date: July 12, 2023 To whom it may concern, Hon Lin Technology Co., Ltd. hereby authorize Eric Huang in Sporton International Inc. to act on our behalf in all matters relating to applications for FCC equipment authorization, including the signing of all documents relating to these matters. Any and all acts carried out by Eric Huang in Sporton International Inc. on our behalf shall have the same effect as acts of our own. We also hereby certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits that includes FCC benefits pursuant to section 5301 of the Anti-Drug Abuse Act of 1988. 21 U.S.C. 862. This authorization is limited to the product of as following:

FCC ID: 2AQ68T99W373M This authorization is valid until further written notice from Hon Lin Technology Co., Ltd. Sincerely, ________________________ Nancy Lin nancy.lin@foxconn.com