FCC ID: HD599EXLG 99EX mobile computer

 

Draft 8/12/11 Proxy server connection Note: If you are connected to your ISP or private network during synchronization, the terminal should download the proper proxy settings during synchronization with the workstation. If these settings are not on your workstation or need to be changed, ask your ISP or network administrator for the proxy sever name, server type, port, type of Socks protocol used, and your user name and password. To complete the setup screens, obtain the network parameters from your system administrator. Modify an Existing Connection Manage Existing Connections appears on the Connections tab after at least one network connection has been established. Tap Manage Existing Connections on the Horizontal scroll and follow the setup screens. Advanced The Advanced screen enables you to select the default network, dialing rules, and IP address exceptions for modem connections. Note: You should not need to change Advanced settings because most ISPs now use DHCP addresses. 8 - 5 Preliminary Draft 8/12/11 Dolphin Wireless Manager The Dolphin Wireless Manager provides a centralized interface that enables and disables all the on-

board radios. Each radio has its own configuration program. The Dolphin Wireless Manager also pro-

vides shortcuts to the configuration utilities for each radio. Tap on the Home screen to access the Dolphin Wireless Manager. OR 1. Tap once on the Title bar to access the Horzontal Scroll bar. 2. Tap

. 3. Select, Dolphin Wireless Manager. Dolphin Wireless Manager Window These buttons show you the state of the radio. If applicable, information about the radio appears when the radio is activated. Enabling the Radios 1. Tap on the Home screen to access the Dolphin Wireless Manager. 2. Tap anywhere inside the rectangle of the radio you want to enable. 3. The radio begins activating. 8 - 6 Preliminary Draft 8/12/11 4. When the radio is activated (i.e., transmitting a signal), the OFF button changes to ON. Note: If applicable, information about the radio appears in the rectangle. Accessing Radio Configuration Utilities Each radio has its own configuration utility that you can access by tapping Menu on the tile bar. Radio Type 802.11a/b/g/n Menu Option Tap WLAN Settings and the Honeywell WLAN Security Supplicant opens. The Honeywell WLAN Security Supplicant Users Guide is available for download from the Dolphin 99EX product page at www.honeywellaidc.com. Bluetooth Tap Bluetooth Settings and the Bluetooth Settings open. For details, see Working with the Bluetooth Radio on page 10-1. GSM/HSDPA/UMTS/GPRS/

EDGE Tap Phone Settings and the Phone opens. For details, see Working with Wireless Wide Area Networking (WWAN) on page 9-1. GSM/CDMA Tap Gobi Settings and the Gobi Manager opens. For details, see Gobi Manager on page 9-13. 8 - 7 Preliminary Draft 8/12/11 Network Cards The Network Cards screen allows you to set and configure the type of Network Adapter the Network card in the terminal uses. You can modify the adapter settings (e.g., Name Servers or IP address) by tapping on the adapter type or highlighting the adatpter and tapping Edit at the bottom of the screen. Connecting and Synchronizing the Terminal and Workstation To synchronize data between the terminal and the workstation, ActiveSync (version 4.5 or higher) or Windows Mobile Device Center must be installed and configured for the appropriate communication type on the host workstation (Windows-based PC) and the Dolphin terminal. Dolphin terminals ship with ActiveSync already installed. Therefore, if ActiveSync is already installed on the host workstation, you just need to connect the Dolphin terminal to the host workstation (via Dolphin peripheral) to initiate com-

munication. If ActiveSync (4.5 or higher) or Windows Mobile Device Center is not installed on the host workstation, you can download and install the most current version of the software from the Microsoft Web site

(http://go.microsoft.com/fwlink/?LinkId=147001). Note: ActiveSync on your Dolphin terminal works with Windows Mobile Device Center on host workstations running Windows Vista or Windows 7 and with ActiveSync on host workstations running Windows XP. For detailed information on ActiveSync and WMDC visit the Microsoft Windows Phone Web site.

When communicating via ActiveSync or Windows Mobile Device Center, your terminal is designed to be connected to the host workstation with a communication peripheral sold/manufactured by Honeywell, such as the charge/communication cable. Use of any peripheral not sold/manufactured by Honeywell may cause damage not covered by the warranty. Capabilities Back up and restore your device data. Copy (rather than synchronize) files between your device and workstation. Control when synchronization occurs by selecting a synchronization mode. For example, you can synchronize continually while connected to your workstation or only when you choose the synchronize command. 8 - 8 Preliminary Draft 8/12/11 Select which information types are synchronized, controling how much data is synchronized. For example, you can choose how many weeks of past appointments you want synchronized. Communication Types The Dolphin terminal supports the following types of communication via ActiveSync through its I/O Connector (see page 3-11) on the bottom panel:

USB The USB cable and hardware peripherals allow the terminal to communicate with a workstation or to networked through a USB hub. The Dolphin terminal supports Hi-Speed USB communication

(USB 2.0); maximum data transfer rate is 480 Mbps. The Dolphin terminal defaults to USB communication out of the box. The RS232 cable allows the terminal to communicate with a workstation, modem, or any RS232 device. Maximum data transfer rate is 115 Kbps. RS232 Hardware Requirements for Setup Dolphin communication peripheral (e.g., HomeBase, eBase, USB or RS232 Communication/Charge Cable) and power supply. A USB cable (for USB communication) or Serial cable (for RS232 communication) if one is not supplied with your Dolphin communication peripheral Software Requirements for Communication ActiveSync (v4.5 or higher) or Windows Mobile Device Center installed and configured on the host workstation (PC), see Setting Up the Host Workstation on page 8-9. Note: ActiveSync or Windows Mobile Device Center must be setup on your workstation before you initiate synchronization from the terminal for the first time. Windows 98 Second Edition, Windows Me, Windows 2000, Windows NT (4.0 SP6 or higher), Windows XP, Windows Vista, and Windows 7 operating systems. Setting Up the Host Workstation To synchronize data between the terminal and the workstation, ActiveSync (v4.5 or higher) or Windows Mobile Device Center must be configured for same communication type on both the host workstation and the Dolphin terminal. ActiveSync Verify that ActiveSync is configured to use the appropriate communication type. 1. In the ActiveSync window on your workstation, select File > Connection Settings. 2. Do one of the following:

a. For USB communications, check the box next to Allow USB connections. b. For RS232 communications, check the box next to Allow connection to one of the following, and select COM1 from the drop down menu. Note: You can have both USB and RS232 selected in the software without affecting processing. However, your hardware setup should use only RS232 or USB, not both. 8 - 9 Preliminary Draft 8/12/11 Connecting the Dolphin Terminal to the Host Workstation After setting up both the workstation and the terminal:

1. Connect the Dolphin terminal to the workstation using a Dolphin communication peripheral. 2. ActiveSync or Windows Mobile Device Center should open and connect automatically to the Dolphin terminal. Synchronizing with the Host Workstation After setup, synchronization begins automatically whenever the terminals mechanical connector con-

nects to a Dolphin peripheral that is connected to a host workstation with ActiveSync or Windows Mobile Device Center installed. For additional information visit the Microsoft Phone Web site (http://go.micro-

sot.com/fwlink/?LinkId=147001). Exploring the Terminal from the Workstation ActiveSync 1. Open the main ActiveSync window (on the desktop). 2. Click Explore. This opens the Mobile Device folder for the terminal in Windows Explorer. 3. The Dolphin terminal is now treated as a mass storage device, and transferring files is as simple as dragging and dropping or copying and pasting. Windows Mobile Device Center 1. Open Windows Mobile Device Center (on the desktop). 2. Click File Management. This opens the Mobile Device folder for the terminal. 3. The Dolphin terminal is now treated as a mass storage device, and transferring files is as simple as dragging and dropping or copying and pasting. Installing Additional Software Dolphin terminals ship with the operating system, radio drivers, and custom Honeywell software already installed. These are the default programs that install when your terminal first boots up. You can install additional software programs to the terminal provided that the following parameters are met:

The software program was created for a Windows Embedded Handheld 6.5 device. The terminal has enough memory to store and run the program. The program has an EXE, CAB, or DLL extension. When selecting programs, verify that the program and version of the program are designed for the Win-

dows Embedded Handheld 6.5 and the terminals processor. You can verify your processor by tapping

> Settings > System > About > Version. Make a note of the information in the Processor field. To install additional software, you can use the communication options described in this chapter. Adding Programs Using ActiveSync or Windows Mobile Device Center, see page 8-11. Adding Programs Using the Internet, see page 8-12. 8 - 10 Preliminary Draft 8/12/11 Adding Programs Using ActiveSync or Windows Mobile Device Center Generally, software for Windows Embedded Handheld devices must be installed to the host workstation first, then transferred to the Dolphin terminal. Note: An active Microsoft ActiveSync or Windows Mobile Device Center connection between a host workstation and the Dolphin terminal is required to add programs. For additional information, see Connecting and Synchronizing the Terminal and Workstation on page 8-8. 1. Download the program to the workstation from either the Internet or the install CD. You may see a singe *.exe or setup.exe file, a *.cab file, or a *.dll file. Note: There may be several versions of files for different device types and processors. Select the file that matches the terminals processor. 2. Read any installation instructions, Read Me files, or documentation that comes with the program. Many programs provide special installation instructions. 3. Connect the terminal to the workstation via a Dolphin communication peripheral. If the File is an Installer (*.exe or *.setup.exe) An installer program is one that installs on the workstation and the terminal simultaneously; one process installs to both devices. 1. On the workstation, double-click the *.exe or setup.exe file. The installation wizard begins. 2. Follow the directions on the workstation screen. The installation process includes transferring the software to the Dolphin terminal. If the File is Not an Installer Some programs cannot be installed on PCs because they are designed exclusively for Windows Embed-

ded Handheld devices. In these cases, the appropriate files must be stored on the host workstationand transferred to the terminal via ActiveSync Explore or Windows Device Mobile File Management. Note: You know that the program is not an installer because an error message stating that the program is valid but designed for a different type of computer appears when you try to install the program on the workstation. 1. If you cannot find any installation instructions for the program in the Read Me file or documentation, do one of the following:

a. Open ActiveSync and click Explore, or b. Open Windows Mobile Device Center and click File Management 2. On the workstation, navigate to the workstation folder containing the program file(s). Copy and paste the file(s) into the Program Files folder on the terminal. If you want the program to be part of the Autoinstall that occurs after a factory reset or software upgrade, paste the program file(s) in both the \IPSM\Honeywell\Autoinstall folder and the \Honeywell\Autoinstall. Note: Contact a Honeywell technical support representative for information on how to perform a factory reset. See Technical Assistance on page 18-2 or go to www.honeywellaidc.com. 3. On the terminal from the Start screen, tap File Explorer, navigate to the folder where the program is located. 4. Tap on the program file to start the installation. 8 - 11 Preliminary Draft 8/12/11 If you copied the file to the \Honeywell\Autoinstall folder, you can perform a Soft Reset

(CTRL + ENTER) to install the program. For more information, see Hardware Maintenance on page 3-17. Connecting the Terminal to a Wireless Network You connect the terminal to a wireless network through the on-board radio (802.11a/b/g/n, Bluetooth, and/or GSM/CDMA). Each radio has its own configuration utility and requires specific information about the wireless network to connect. Successful connection depends on your network infrastructure about which you will need specific information from your network administrator. WLAN (802.11a/b/g/n) The 99EX has a 2.4 GHz 802.11b/g/n - 5.0 GHz 802.11a/n WLAN (Wireless Local Area Network) radio. The radio is interoperable with other 802.11a/b/g/n, Wi-Fi compliant products including access points

(APs), workstations via PC card adapters, and other wireless portable devices. By default, the 802.11a/

b/g/n radio is disabled after each factory reset. The next step is to configure the connection parameters of the radio to connect to a wireless network. WLAN Radio The WLAN radio is configured in the Honeywell WLAN Security Supplicant, which you access by tapping the program icon in the task tray near the bottom of the touch screen. For complete configuration instruc-

tions, download the Honeywell Secure Wireless (SWC) Client Users Guide from www.honeywellaidc.com. A link to this guide appears on the Dolphin 99EX product page. Adding Programs Using the Internet When you have established a network connection, you can access the Internet and download additional software programs. Note: When selecting programs, verify that the program and version of the program are designed for Windows Embedded Handheld and the terminals processor. You can verify your processor by tapping

> Settings > System > About > Version. Make a note of the information in the Processor field. 1. Open Internet Explorer and navigate to the programs location. You may see a single *.exe or setup.exe file, or several versions of files for different device types and processors. 2. Select the program version that matches your Dolphin terminal and processor. 3. Read any installation instructions, Read Me files, or documentation that comes with the program. Many programs provide special installation instructions. 4. Download the program to the terminal directly from the Internet. You would normally store the program in the \Program Files folder unless another location is required by the program. 5. On the terminal, tap the installer file: e.g., *.exe or setup.exe file. 6. The installation wizard for the program begins. 7. Follow the directions on the screen to complete the installation. 8 - 12 Preliminary Draft 8/12/11 Software Upgrades Contact a Honeywell technical support representative for information on available software upgrades for your Dolphin terminal, see Customer Support on page 18-1 or go to www.honeywellaidc.com. To prevent data loss, back up all user data to an SD card or external memory device before

performing an upgrade. Note: An active Microsoft ActiveSync or Windows Mobile Device Center connection between a host workstation and the Dolphin terminal may be required for some types of software upgrades. For additional information, see Connecting and Synchronizing the Terminal and Workstation on page 8-8. For information on File Provisioning on the 99EX, see page 2-10. 99EX and 99GX COM Port Assignment Table COM Port Description COM0 COM1 COM2 COM3 COM4 COM5 COM6 COM7 COM8 COM9 Unused Serial Port: RS232 Connector on the bottom panel Bluetooth IrDA: Serial Infrared (SIR) up to 115 Kbps Available Bluetooth DUN IrCOMM GPS: COM Port for the GPS receiver USB Serial: Virtual USB Serial port for ActiveSync Bluetooth BTHATCI server 8 - 13 Preliminary Draft 8/12/11 8 - 14 9 Preliminary Draft 8/12/11 Working with Wireless Wide Area Networking (WWAN) Overview The 99EX has two options for WWAN connectivity, a data+voice GSM/HSPA+/UMTS/GPRS/EDGE radio or a data only Gobi radio, which supports GSM/HSPA+/UMTS/GPRS/EDGE and CDMA/1xRTT/EVDO. Note: The 99GX models are not curretly offered with WWAN capabilites. GSM HSPA+

UMTS GPRS EDGE CDMA 1xRTT EVDO Short for Global System for Mobile communications, GSM is an open, non-proprietary wireless WAN system that is constantly evolving and growing. Short for High-Speed Download Packet Access, HSPA+ is a non-voice value added service that allows packet-switched data to be instantly sent and received across mobile telephone networks. Short for Universal Mobile Telecommunications System, UMTS is a non-voice value added service that allows packet-switched data to be instantly sent and received across mobile telephone networks. Short for General Packet Radio Service, GPRS is a non-voice value added service that allows packet-switched data to be instantly sent and received across mobile telephone networks. E-GPRS is a non-voice value added service that allows packet-switched data to be instantly sent and received across mobile telephone networks at a higher data rate than standard GPRS. Short for Code Division Multiple Access. Short for Single-Carrier Radio Transmission Technology. Short for Evolution-Data Optimized. Requirements Using GSM/HSPA+/UMTS/GPRS/EDGE requires:

a network subscription to a GSM/HSPA+/UMTS/GPRS/EDGE network (you need to know what service providers are in your geographic area), and an installed SIM card that has been activated by the network service provider (see SIM Card Installation on page 9-3). Using a CDMA requires:

an active account with a CDMA carrier. The account is linked to the Mobile Equipement Identifier

(MEID) of the integrated WWAN radio. Penta Band Antenna The WWAN radio features an internal antenna that is optimized for power output and receiver sensitivity. This is an omni-directional antenna. For the WWAN radio, there is a unified penta band antenna that supports 850/900/1800/1900 (GSM/

GPRS/EDGE), 850/1900/2100 (HSPA+/UMTS), and 850/1900 (CDMA). 9 - 1 Draft 8/12/11 Signal Strength The signal strength of the WWAN connection is indicated by the number of bars that appear in the signal strength icon in the Title bar at the top of the window. Icon Indicates The signal strength of the radio connection. The signal strength of the phone (voice) connection;

see GSM/HSPA+ Global Radio Dolphin Models on page 9-5. The signal strength of the data connection; see Data Communication (GSM/HSPA+ Global Radio Dolphin Models) on page 9-9. Voice and Data Communication Dolphin terminals with integrated GSM/HSPA+/UMTS/GPRS/EDGE radios are optimized for the follow-

ing two-way voice and data communications:

Voice: GSM voice data (dial-up) Data: Available speed depends on the wireless network carrier and their supported packet-data technol-

ogy in addition to network conditions. GPRS Class 10: data transmission max. 85.6 kbps (DL), max. 42.8 kbps (UL) HSPA+: data transmission max. 14.4 Mbps (DL), max. 5.76Mbps (UL) UMTS: data transmission max. 384 Kbps (DL), max 384 Kbps (UL) EDGE (E-GPRS) Class 10: data transmission max. 237 Kbps (DL), max. 118 kbps (UL) You can use the GSM radio for voice communication and data communication, but not at the same time. If you want to communicate over the phone (voice), you cannot send data. If you want to send data, you cannot use the phone. 9 - 2 Preliminary Draft 8/12/11 SIM Card Installation Short for Subscriber Information Module, a SIM card stores the subscriber's personal information, GSM/GPRS radio settings, security keys, contacts, etc. SIM cards can be installed in compatible mobile devices, enabling you to switch devices without losing personal and setup information. Protective SIM/Memory Card Door Battery Well T6 TORX Screw SIM Card Requirements Before installing the SIM card:

The service provider must activate the SIM card. The terminal must be powered down. Note: If no SIM card is installed, you can still make emergency phone calls (e.g., 9-1-1). 9 - 3 Preliminary Draft 8/12/11 Installing a SIM Card 1. Press the Power key to put the terminal in Suspend Mode. 2. Release the hand strap near the speaker on the back panel of the terminal. 3. Remove the battery door. 4. Wait at least 3 seconds, then remove the battery. 5. Remove the T6 TORX screw securing the protective door closed. 6. Lift up the lower left corner of the door to access the SIM card socket. 7. Unlock the access door to the memory socket by sliding the door toward the IrDA port side of the terminal. 8. Lift the door up to expose the socket. 9. Insert the SIM card into the socket. Note: Make sure the interface on the card is connected to the SIM Card interface in the socket; align the beveled corner of the card with the beveled corner of the socket. 10. Close and lock the access door. 11. Close the protective door over the memory socket. Install and tighten the T6 screw to secure the door closed. 12. Install the battery and the battery door. 13. Press the Power key or SCAN key to wake the terminal. Step 5 Step 6 Step 7 Step 8 Step 9 Step 10 9 - 4 Preliminary Draft 8/12/11 Enabling the WWAN Radio By default, the WWAN radio is not enabled after a factory reset. Verify the status of the radio in the Dol-

phin Wireless Manager. Tap on the Home screen to access the Dolphin Wireless Manager. If the WWAN radio is OFF, tap the rectangle to enable or turn ON the radio. GSM/HSPA+ Global Radio Dolphin Models Voice Communication You can use the Dolphin terminal as a phone over the GSM radio. Audio Modes The front panel of the 99EX contains both a speaker and a microphone that you can use to send and receive audio signals over the GSM network, see Front Panel: 99EX and 99GX on page 3-5. There are two audio modes:

Handset Mode - The front speaker is used for receiving handset voice calls and the front panel microphone provides audio input to the terminal. Hands-Free Mode - Hands-free mode is when you use the rear speaker as a speakerphone. To switch to speakerphone, tap on the speaker button in the Dialer window, see Accessing the Dialer Window on page 9-6. 9 - 5 Draft 8/12/11 Volume Control

VOL Blue Blue

PG Use the Dolphin keyboard to adjust the volume. To raise the volume, press the Blue modifier key + up arrow. To lower the volume, press the Blue modifier key + down arrow. Or Press the up or down arrow on the Volume Control button on the right side of the device to adjust the volume of the active speaker, see Volume Control Button on page 3-10. Accessing the Dialer Window Note: The WWAN radio must be active for voice communication, see Enabling the WWAN Radio on page 9-5. Tap on the Home screen or tap

> Phone to open the Phone dialer. Displays the network carrier from the SIM card. Displays the most recent calls. Toggles the touch screen keypad ON or OFF. Menu Dialing Once the dialer window is open, you can dial out two ways:

Tap the buttons on the dialer window. Use the physical keyboard (when the keyboard is in numeric mode). 9 - 6 Preliminary Draft 8/12/11 Sending Calls After the number is dialed, tap Talk or press the Blue

+ Send key

. SEND Note: The icon indicates that the phone is in use. Ending Calls While the phone call is live, tap End or press the Blue

+ End Key

. END Accessing Voice Mail

> Phone Tap Note: Update the voice mail retrieval number by turning the phone OFF and then ON via the Dolphin Wireless

> Voice Mail > Call.

> Speed Dial Manager, see Enabling the WWAN Radio on page 9-5. View Options From the view menu, you can modify the display screen to show Calls and Contacts, All Calls or Speed Dial numbers. Tap Menu

> View. Setup Options The Options menu contains four setting widows: Sounds, Security, Services, and Network. Tap Menu Sounds

> Options. The Sounds screen enables you to customize the:

Ring type (e.g., Ring, Increasing ring, Ring once, Vibrate, Vibrate and ring, Vibrate then ring or None) Ring tone Keypad tone (e.g., Long, Short, or Off) 9 - 7 Preliminary Draft 8/12/11 The Security screen provides access to establish or change your security PIN. Check the box next to, Require a PIN when the phone is used to enable the PIN security feature. For each service, the phone reads settings from the network stored on the SIM card and then displays the available options from the carrier on the screen. To customize the settings, select it from the list and tap Get Settings. Security Services 9 - 8 Preliminary Draft 8/12/11 Network You can find, select, and set your preferred network order from the Network screen. Data Communication (GSM/HSPA+ Global Radio Dolphin Models) You set up data communication via the Connections Manager. The carrier on the SIM card is the ISP. System Requirements The GSM radio must be enabled; see Enabling the WWAN Radio on page 9-5. You must have an active SIM card with a DATA plan installed; see SIM Card Installation on page 9-3. Information Requirements You must have from the SIM card carrier:

The APN (access point name). The username and password of the account. Establishing Data Communication 1. Tap

> Settings > Connection > Connections

. 2. Under My ISP, tap Add a new modem connection. 9 - 9 Preliminary Draft 8/12/11 3. Enter a name for the connection. Select Cellular Line (GPRS) as the modem. Tap Next. 4. Enter the Access point name. Tap Next. 5. Enter the username and password from the account. Tap Finish. 9 - 10 Preliminary Draft 8/12/11 6. The connection you just created should appear in the list on the modem tab. 7. Tap and hold on the connection. Select Connect on the popup menu. 8. The network icon in the Title bar indicates the GSM radio is attempting to connect

. Note: When the device is on a 2G (EDGE/GPRS) network, a data connection failure occurs if the phone is in use for a voice call while attempting a data connection. Simultaneous voice and data use is only supported if the device is on a 3G network. In 2G mode, a voice call takes precedence over data connections. Active data connections are placed in "park" mode automatically and the data is "retrieved"

when the voice call ends. 9. When the connection is complete, the network icon changes to:

. 10. You can now send data over GSM. Ending the Data Connection By default, the data connection will disconnect after a certain amount of time passes without use. This period of time is determined by ISP. To end the data connection manually, tap the network icon the popup bubble. in the Title bar and select Disconnect on Manual Network Selection You can select Automatic or Manual network selection. The Phone defaults to Automatic network selec-

tion. 9 - 11 Preliminary Draft 8/12/11 1. When an active SIM card is inserted in the terminal, tap

> Settings > Personal > Phone

> Menu > Options. 2. Select the Network tab. 3. Under Network selection, select Automatic (the default selection) or Manual. a. If you select Manual, the Phone searches for available networks. b. The found networks appear. c. Select a new network and tap OK. The Phone registers on the new network and the Network tab appears. d. To switch to another network, tap the now active Select button and the process repeats. 4. To switch back to automatic roaming, select Automatic under Select networks and tap OK. 9 - 12 Preliminary Draft 8/12/11 Data Communication GSM/CDMA Dolphin Models Gobi Manager The Gobi Manager enables you to see real time status of the radio, setup your Network selection, view youre profile and scan for networks. The Gobi Manager contains four tabs: Status, Setup, Profile, and About. 1. Tap on the Home screen to access the Dolphin Wireless Manager. 2. Tap Menu. 3. Select Gobi Settings. Status Tab Setup Tab The Status tab contains the real time radio status information including:

The power status of the radio (e.g., ON or OFF) The received signal strength intensity (RSSI) The radio mode used (e.g., GSM, UMTS, EVDO or 1xRTT) The network firmware used The IP Address assigned You can also turn the radio ON or OFF and Start or Stop a data session from the Status tab. The Setup tab allows you to view and customize the Network Setupincluding:

The Nework Firmware (e.g., AT&T, Verizon, Sprint, or T-Mobile) The SIM Slot accessed The Access Point Name (APN) The Username of the account The Password of the account Enable or Disable Automatic Data Sessions Activate Over the Air (OTA) 9 - 13 Preliminary Draft 8/12/11 Profile Tab The Profile tab allows you to see Radio capability information and network statistics including:

Radio Hardware and Software versions Radio and SIM identification numbers Serving network connection type and state Available radio interfaces for the current serving network About Tab Displays copyright and version information for the Gobi Connection Manager. Establishing Data Communication 1. Tap on the Home screen to access the Dolphin Wireless Manager. 2. Tap Menu and then select Gobi Settings. 3. From the Setup tab, select the carrier and enter user information (GSM only). Note: An installed SIM card is required and the SIM slot option must be set to 0. 4. Check the Auto Start Data Session checkbox to automatically start the data session. 5. Tap the Apply button. The Connection Manager automatically switches to the Status Tab. 6. Tap the Radio Power ON button. 7. When the radio connects to the network, the status changes to Registered and a signal strength is displayed. 8. If Auto Start Data Session was checked on the Setup tab, the state automatically changes from Registered to Data Session Open and an IP address appears. If Auto Start Data Session was not selected, then the Data session can be started manually by tapping Start Data Session button from the Status tab. 9 - 14 10 Preliminary Draft 8/12/11 Working with the Bluetooth Radio Enabling the Bluetooth Radio You enable the Bluetooth radio in the Dolphin Wireless Manager (see page 8-6). 1. Tap on the Home screen to access the Dolphin Wireless Manager. 2. Tap anywhere inside the Bluetooth rectangle and Bluetooth begins activating. 3. When the radio is activated (i.e., transmitting a signal), the OFF button changes to ON. Now, the Bluetooth radio is transmitting a signal. Additional text in the Bluetooth section tells information about the Bluetooth radio. Visible and Not visible indicates whether the Bluetooth radio is discover-

able or not discoverable by other Bluetooth devices. Now, you can connect to other transmitting and discoverable Bluetooth devices (see page 10-2). To make the terminal discoverable, see page 10-6. 10 - 1 Preliminary Draft 8/12/11 Pairing and Trusted Devices The terminal does support pairing. Pairing happens during general connection setup. Paired devices are

"trusted" devices. This means that there is unrestricted access to all services (including services that require authorization and authentication). A connection can exclude pairing. A device that is connected to the terminal but not paired with it is con-

sidered an untrusted device. Content can still be passed to untrusted devices by requiring authorization with each attempt (for example, with the initialization of a file exchange). The Beam File method of file transfer can be used to pass a file as an untrusted device; see Transferring Files on page 10-5. Connecting to Other Bluetooth Devices To connect to other bluetooth devices, you need to perform a device discovery, select a discovered device, and then connect to the selected device. Pairing happens as part of the connection process. 1. Make sure the bluetooth device is in range and set to be discoverable by other bluetooth devices. 2. In the Dolphin Wireless Manager, tap Menu > Bluetooth Settings. OR Tap

> Settings > Bluetooth

. 3. Tap Add new device. The terminal begins searching for discoverable Bluetooth devices. 10 - 2 Preliminary Draft 8/12/11 4. Select a device from the list and tap Next. The types of devices in the vicinity of the radio appear in the list of discovered devices. 5. You are prompted to enter a passcode. If the device has a specific passcode, enter it in the Passcode field and tap Next. When attempting to connect to a printer or headset with Bluetooth capabilities, the passcode may default to either 1111 or 0000. If there is no default, consult the device literature for the number. If the device does not have a specific passcode, enter one in the Passcode field and tap Next. 6. The Bluetooth radio tries to connect with the device. 7. If you created a passcode, you will be prompted by the other device to enter the same passcode. Enter the created passcode to establish a paired connection. If you entered a device specific passcode, you should not have to do anything on the other device. 10 - 3 Preliminary Draft 8/12/11 8. When the connection is complete, a list of matching and supported services on the device appears. Only the services that are mutually supported on both devices appear in the Partnership Settings window. 9. Select the services you want to use and tap Save. The services on the new devices have to be selected or the pairing wont include those services, even though the devices are paired. If services are not selected, you will be continually re-prompted for the passcode from the device. 10. The device appears in the list on the main window. If you are connecting to a printer or headset, complete any additional steps required by de 11. After the passcodes have been accepted on both sides, you have a trusted (paired) connection. 10 - 4 Preliminary Draft 8/12/11 Transferring Files 1. Tap

> File Explorer. 2. Navigate to the file you want to transfer. 3. Tap and hold on the file and select Beam File on the popup menu. 4. The Bluetooth radio begins searching for devices. When a Bluetooth device is first found, it appears as an Unknown device; the icon indicates that the device is a Bluetooth device. As data is retrieved, the device IDs appear in the list. 5. Tap the device to begin sending the selected file. 6. While trying to connect, the selected device reads Pending. 7. When the file is being transferred, the selected device reads Sending. 10 - 5 Preliminary Draft 8/12/11 Making the Terminal Discoverable By default, the Dolphin terminal is not discoverable, which means that the terminal will not be found by other Bluetooth devices. To make the terminal discoverable, tap Mode on the Horizontal scroll. Select Make this device visible to other devices and tap OK. Selecting COM Ports You can select COM ports 0-9. For more information, see 99EX and 99GX COM Port Assignment Table on page 8-13. 10 - 6 11 Preliminary Draft 8/12/11 Working with GPS Overview The Dolphin 99EX terminal contains an integrated GPS module that allows location tracking of workers and vehicles, providing better utilization of field assets. Optional mapping and navigation software pro-

vides turn-by-turn driving directions and location information. Note: The 99GX models are not curretly offered with GPS capabilites. Assisted GPS Support The operating system software does not inhibit nor explicitly support assisted GPS modes, which usually requires installing a vendor-specific client on the terminal that communicates with the GPS module. This client would then provide the almanac and/or ephemeris data for warm or hot start modes of operation, allowing a lower time to first fix (TTFS). The Client must be configured on the terminal, active, and pro-

vide the data to the GPS module through the standard COM port. Powering the GPS Module The GPS module powers on automatically when accessed by a software application and powers off automatically when that software application closes. You cannot manually power on and off the GPS module. Communication Ports There are two ways to access the GPS module: through the actual COM port (COM7) or the GPS Inter-

mediate Driver. The method you use depends on the software application you are using. If the software application requires the actual COM Port, set the operating system to use COM7. If the software applica-

tion requires the GPS Intermediate Driver, set the operating system to use the GPS Intermediate Driver. Selecting the Port 1. Tap

> Settings > System > External GPS. 2. In the GPS program port: drop-down list, select COM7 or GPD1

(the GPS Intermediate Driver) as required by the application. Note: The GPS program port and hardware port cannot be the same value. 3. Tap OK to save. COM7 COM Port 7 can be set to the following baud rates:

4800 9600 (Default baud rate. Recommended for optimal performance.) 19200 38400 11 - 1 Preliminary Draft 8/12/11 Other baud rates are not possible. The baud rate selected on COM7 is the actual baud rate with which the GPS communicates. GPS Intermediate Driver When the first user of GPD1 opens the port, the GPS Intermediate Driver opens the COM7 port. The GPS Intermediate Driver allows multiple applications to open GPD1, and the GPS data is broadcast to all open ports. When the GPSID driver is in use, the COM7 port is allocated to GPSID as READ|WRITE (COM7 is still available for access mode of 0). For more information about Microsofts GPS Intermediate Driver, follow this link:

http://msdn.microsoft.com/en-us/library/ms850332.aspx GPS Demo The GPS Demo demonstrates the main functionality of the integrated GPS module. The GPS Demo uses COM7. To see the GPS Demo, tap

> Demos > GPS Demo. 11 - 2 12 Preliminary Draft 8/12/11 Dolphin 99EX HomeBase Device (Model 99EX-HB) Overview As the hub of your Dolphin system, the Dolphin 99EX HomeBase (99EX-HB) charging and communica-

tion cradle supports both RS232 and USB communications, which make it able to interface with the majority of PC-based enterprise systems. The 99EX-HB charger is designed for use with battery pack models 99EX-BTSC (standard Li-poly 3.7 V, 11.3 watt hour) and 99EX-BTEC (extended Li-ion 3.7 V, 18.5 watt hour) manufactured by Honeywell International Inc. and with Dolphin 99EX and 99GX model terminals.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honey-

well peripherals, cables, or power adapters may cause damage not covered by the warranty. The HomeBase is not designed for use in hazardous locations. Unpacking the HomeBase Open the shipping box and inspect the package to see that the following standard items are included:

One Dolphin HomeBase, model 99EX-HB One UL Listed power supply rated a 12VDC, 3A(see Power on page 12-5) One power cord These items are needed to operate the HomeBase. If any items are missing or anything appears to be damaged, contact your Customer Account Representative. Keep the original packaging in case you need to return the HomeBase for service or to store the HomeBase while not in use. Optional Equipment A standard RS232 or a standard USB cable is required when using the HomeBase for communication between the terminal and a host device. Charge Time The base completes a full charge of the main battery pack installed in the terminal seated in the terminal well in 4 hours for the standard battery or 6 hours for the extended battery. The base completes a full charge of the battery pack in the Auxiliary Battery Well (see page 12-2) in 4 hours for the standard bat-

tery or 6 hours for the extended battery. Charging Process The base also provides power to the intelligent battery charging system in all Dolphin terminals that senses when a full charge has been achieved and switches to a trickle charge to maintain the full charge. Communications Reliable data communications at speeds of up to 115K baud can be transmitted by the base through the RS232 serial port. Using the Hi-Speed USB port, the data transmission rate goes up to 480 Mbps. These bases cannot be physically connected to each other - sometimes referred to as daisy-chained. 12 - 1 Preliminary Draft 8/12/11 Convenient Storage The intelligent battery charging system makes this base a safe and convenient storage receptacle for your Dolphin terminal. Capacity The base holds one terminal and features an auxiliary battery well behind the terminal well that can charge a battery pack independently of the terminal well. This means that one base can charge two bat-

tery packs: the one installed in the terminal and a spare.

We recommend use of Honeywell Li-ion or Li-poly battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honey-

well peripherals, cables, or power adapters may cause damage not covered by the warranty. Parts and Functions Front Panel Power/Dock LED Terminal Well Auxiliary Battery Well COMM LED AUX Battery LED Terminal Well Place the terminal in this well to communicate with a host device, power the terminal, and charge the installed battery pack. The base completely charges the main battery in a Dolphin terminal in 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery. If the host device is a workstation that uses ActiveSync, synchronization begins immediately. Auxiliary Battery Well See Auxiliary Battery Well on page 12-4. 12 - 2 Preliminary Draft 8/12/11 Power/Dock LED Indicates if power is supplied to the HomeBase and if a terminal is docked properly in the base. This color means Red Green AUX Battery LED The HomeBase has power but no terminal is docked. The HomeBase has power and the terminal is properly seated in the base. Indicates status of the battery charging in the auxiliary battery well; see Back Panel on page 12-4. This color means Orange Green The auxiliary battery is charging. The auxiliary battery has completed charging and is ready for use. Red, Flashing The internal temperature of the auxiliary battery is too hot or there is a battery error. Charge the auxiliary battery in a cooler environment or replace the battery with a new Honeywell Li-ion or Li-poly battery. For information about charging a battery in the auxiliary battery well, see page 12-6. COMM LED This is the communication LED. It indicates the status of data transfer between the Dolphin terminal and the host device. The color of this LED differs if the base is using the serial or USB port connection. If using the serial port This color means Red Green Orange Serial data is being sent from the host device to the base. Serial data is being sent from the base to the host device. Serial data is being sent in both directions at the same time. If using the USB port This color means Green A USB Connection is established with the host workstation. 12 - 3 Preliminary Draft 8/12/11 Back Panel Auxiliary Battery Well USB Port RS232 Port Auxiliary Battery Well DC Power Jack The base enables you to charge an additional battery pack independently of the terminal well in 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery. This feature ensures that you can always have a fully-charged battery for your terminal. See Charging a Spare Battery in the Auxiliary Battery Well on page 12-6. USB Port This USB port is USB v2.0 Hi-Speed compliant. Using a USB cable, you can connect the base to a host device, such as a workstation. USB communication occurs through Microsoft ActiveSync (v4.5 or higher) or Microsoft Windows Mobile Device Center (WMDC) depending on the host workstations operating system. When the terminal is seated in the terminal well, it is connected to the host device via the base. Note: ActiveSync on your Dolphin terminal works with Windows Mobile Device Center on host workstations running Windows Vista or Windows 7 and with ActiveSync on host workstations running Windows XP. For detailed information on ActiveSync and WMDC visit Microsoft's Windows Mobile Web site. RS232 Port Use the 9-pin, RS232 cable from Honeywell to connect this port to a peripheral device for RS232 data communication. For more information, see Serial Connector on page 12-9. DC Power Jack Use the power cable from Honeywell that comes with the base to supply power to this power jack. For more information, see Power on page 12-5. 12 - 4 Draft 8/12/11 Bottom Panel For details on how to mount the HomeBase, see Mounting the HomeBase on page 12-9. Serial Number Label Compliance Label Power The base requires 12 Volts DC input for communications, battery charging, and power output to the ter-

minal; the power adapter included with the base converts the voltage from the AC power source to 12 Volts DC. Use only the Honeywell recommended UL Listed power supply with output rated 12VDC, 3A with the device. The operating temperature range is -10 to 50C (14 to 122F). Honeywell recommends that you leave the base connected to its power source at all times, so that it is always ready to use.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty. Connecting Power to the HomeBase A/C Power Cord Power Adapter Power Cable 1. Plug the A/C power cord into the power adapter. 2. Plug the power cable into the power connector on the back of the HomeBase. 3. Plug the A/C power cord into a grounded power source. The base is now powered. The Power/Dock LED on the HomeBase illuminates solid red to indicate the HomeBase has power and no terminal is docked. 12 - 5 Preliminary Draft 8/12/11 Charging the Main Battery The base powers the terminal and fully charges its main battery pack in 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery. The terminal contains an intelligent battery charging system that protects the battery from being damaged by overcharging. The unit senses when a battery pack is fully charged and automatically switches to a trickle charge that maintains the battery at full capacity. Therefore, terminals may be stored in the base without damage to the terminals, battery packs, or peripherals. To check battery power, use the Power system setting; see Power on page 7-16. For more information about Honeywell batteries, see Batteries on page 3-13. To Power a Terminal and Charge its Main Battery 1. Install the battery pack in the terminal; see Install the Main Battery Pack on page 2-1. 2. Verify the base has power. If the Power/Dock LED is not illuminated, see Connecting Power to the HomeBase on page 12-5. 3. Slide the terminal into the terminal well. The Power/Dock LED changes to green. The charging begins immediately if required by the Dolphin terminal.

Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty. We recommend use of Honeywell Li-Ion or Li-poly battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. Charging a Spare Battery in the Auxiliary Battery Well The auxiliary battery well located on the back of the base charges a spare battery independently of the terminal well. The Aux Battery LED on the front panel indicates the status of the battery in this well. Charge time is 4 hours for the standard battery pack or 6 hours for the extended battery pack; see Auxiliary Battery Well on page 12-4. 1. Insert the battery at an angle so the battery pack contacts and the auxiliary well contacts align. 2. Snap the battery into place with a hinging motion. The Aux Battery LED lights orange. 3. Use the AUX Battery LED to monitor the charging progress. The LED lights green when the auxiliary battery has completed charging and is ready for use. Note: If the AUX Battery LED flashes red, the internal temperature of the battery is too hot or there is a battery error. Charge the auxiliary battery in a cooler environment or replace the battery with a new Honeywell Li-ion or Li-

poly battery. 12 - 6 Preliminary Draft 8/12/11 Communication USB Dolphin terminals support USB communications out of the box. The base also supports USB communications via the USB port located on the back. The base acts as a USB device by interfacing the USB signals of the Dolphin terminal to the USB of the host workstation. Using a standard USB cable, the bases USB interface allows the Dolphin terminal to communicate with a workstation. RS232 The base supports RS232 communications via the RS232 Communications Port located on the back of the device. This port enables the Dolphin terminal to communicate to a workstation, modem, or any RS232 device using a standard serial cable and communications software. Requirements A base powered by a power cable and power adapter cable For RS232 communications, a serial cable For USB communications, a USB cable A work station running Windows 98 Second Edition, Windows Me, Windows 2000, Windows NT (4.0 SP6 or higher), Windows XP, Windows Vista, or Windows 7. ActiveSync (v4.5 or above) or Widows Mobile Device Center on the workstation Connecting the Communication Cables 1. Plug in the power supply and connect it to the back of the base. 2. Plug the USB or the RS232 communication cable into the back of the base. 3. Connect the communication cable into the back of the workstation. 4. At this point, the hardware is installed and operating. You may need to reboot your workstation to complete the installation process. Establishing Communication USB or RS232 communication with the terminal is usually auto-detected and configured by ActiveSync or Windows Mobile Device Center based on the communication cable connected. If you are using a USB cable to connect to the workstation, the sync software sets up a USB connection. If you are using an RS232 cable, the sync software sets up an RS232 connection. For more information, see Serial Connector on page 12-9. Communicating with the Dolphin Terminal To initiate communications between the Dolphin terminal and peripheral, complete these steps:

1. Insert the Dolphin terminal into the terminal well of the base. The DOCK LED illuminates green. If the DOCK LED does not illuminate, make sure that the terminal is properly seated. You may need to remove and re-insert the terminal. The Dolphin terminal activates; if the power is off, the terminal automatically powers on. If the terminal does not power on, verify that the Honeywell power supply is properly connected to the cradle and plugged into a functioning outlet. 12 - 7 Preliminary Draft 8/12/11 If the base is connected to the workstation, the Dolphin terminal automatically opens ActiveSync or the Windows Mobile Device Center to establish a connection. 2. The base can now transfer data between the terminal and the host device. If communication does not occur, check the port connections to ensure that the cradle is correctly configured. Verifying Communication You can verify that the USB driver is functioning by watching the COMM LED on the USB base. When the COMM LED illuminates solid green, the base is communicating with the host device. Verifying Data Transfer The COMM LED flashes when data is being transferred via the base. For an RS232 connection, the COMM LED flashes red and green. For a USB connection, the COMM LED does not flash during data transfer. RS232 Communications Cables Connect the base to the host workstation or other device by plugging an RS232 serial cable into the RS232 Communications Port on the rear of the base. The wiring of your cable depends on whether the other device is set up as a Data Communications Equipment (DCE) or Data Terminal Equipment (DTE) device. The Communication Port is configured as a DCE device. To communicate with a DCE device, use either a null modem adapter in line with a standard RS232 cable, or a null-modem serial cable. To communi-

cate with a DTE device such as a workstation, use a standard (or straight-through) RS232 cable. You can make your own cables by following the pin configuration in the chart that follows. To do so, you must determine if your host RS232 device is 9-pin or 25-pin, and whether it is configured as a DCE or DTE device. RS232 Pin Configuration Base /Host Port (DCE) IBM AT DB9 (DTE) IBM XT DB25 (DTE) Modem DB25 (DCE) Pin / Input Signal 2 / (RD) 3 / (TD) 5 / (SG) 4 / (DTR) 6 / (DSR) 7 / (RTS) 8 / (CTS) 2 3 5 4 6 7 8 3 2 7 20 6 4 5 2 3 7 6 20 5 4 Note: This base cannot be daisy-chained. Note: The input signal names are referenced to the DTE target device (ie. workstation or host computer) in accordance with the RS232 standard. 12 - 8 Preliminary Draft 8/12/11 Serial Connector The following diagram displays the pin diagram of the serial connector of the base. Pin Description 1 2 3 4 5 6 7 8 9 Internal Jumper to Pin 6 TXD RXD No Connect GND DTR CTS RTS RI Note: The signal names are referenced to the terminal. The terminal is a DCE RS232 device. Refer to section, RS232 Communications Cables and RS232 Pin Configuration for more details. The base is at a right-angle to the printed circuit board (PCB). The ninth pin has a ring indicator (RI). Mounting the HomeBase Set the base on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is in the base. When choosing a mounting location, bear in mind that the location must allow users' easy access to the Auxiliary Battery Well and the back panel of the HomeBase where the serial port, USB port, and the power jack are located. Desk Mounting The DIN rail slot (7.5 X 35 mm) may be mounted on the bottom to allow for secure desk attachment of the unit if desired. Hardware Required 3/16 in. dia x 5/8 in. long pan head screw 1/2 in. OD x 7/32 in. ID x 3/64 in. thick 3/16 in. dia nut Installing the DIN Rail 1. Slide the DIN rail into the slot along the bot-

tom panel of the base. DIN Rail (7.5 X 35 mm) Serial and USB port location (not in view) 2. Then, using the appropriate nuts and bolts, secure the DIN rail to the desk or flat surface. 12 - 9 Preliminary Draft 8/12/11 12 - 10 13 Draft 8/12/11 Dolphin 99EX eBase Device (Model 99EX-EHB) Overview The Ethernet Base (eBase) enables a single Dolphin 99EX computer to communicate with a host device over an Ethernet network. The 99EX-EHB charger is designed for use with battery pack models 99EX-BTSC (standard Li-poly 3.7 V, 11.3 watt hour) and 99EX-BTEC (extended Li-ion 3.7 V, 18.5 watt hour) manufactured by Honeywell International Inc. and with Dolphin 99EX and 99GX model terminals.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty. The eBase is not designed for use in hazardous locations. Unpacking the eBase Open the shipping box and inspect the package to see that the following standard items are included:

One Dolphin eBase Ethernet cradle, model 99EX-EHB One power supply (see Power on page 13-5) One power cord You will also need to provide a standard CAT-5 Ethernet network cable. These items are needed to set up and operate the eBase. If any items are missing or anything appears to be damaged, contact your Customer Account Representative. Keep the original packaging in case you need to return the eBase for service or to store the eBase while not in use. Charge Time The base completes a full charge of the main battery pack installed in the terminal seated in the terminal well in 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery. The base com-

pletes a full charge of the battery pack in the Auxiliary Battery Well (see page 13-2) in 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery. Convenient Storage The intelligent battery charging system makes this base a safe and convenient storage receptacle for your Dolphin terminal. Capacity The base holds one terminal and features an auxiliary battery well behind the terminal well that can charge a battery pack independently of the terminal well. This means that one base can charge two bat-

tery packs: the one installed in the terminal and a spare.

We recommend use of Honeywell Li-ion or Li-poly battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. 13 - 1 Preliminary Draft 8/12/11 Parts and Functions Front Panel Power/Dock LED Terminal Well Auxiliary Battery Well AUX Battery LED Terminal Well COMM LED Place the terminal in this well to communicate with a host device, power the terminal, and charge the installed battery pack. The eBase completely charges the main battery in a Dolphin terminal in 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7 battery. Auxiliary Battery Well See Auxiliary Battery Well on page 13-4. Power/DOCK LED Indicates if power is supplied to the eBase and if a terminal is docked properly in the base. This color means Red Green The eBase has power but no terminal is docked. The eBase has power and the terminal is properly seated in the base. AUX Battery LED The AUX Battery LED indicates the status of the battery charging in the auxiliary battery well;

see Back Panel on page 13-4. This color means Orange Green The auxiliary battery is charging. The auxiliary battery has completed charging and is ready for use. 13 - 2 Preliminary Draft 8/12/11 This color means Red Flashing The internal temperature of the auxiliary battery is too hot or there is a battery error. Charge the auxiliary battery in a cooler environment or replace the battery with a Honeywell Li-ion or Li-poly battery. COMM LED The COMM LED indicates the status of data transfer between the Dolphin terminal and the eBase. Ethernet Communication When the Dolphin terminal is docked:

This color and status means Green Green Solid A connection has been established between the Dolphin terminal and the Ethernet. Flashing Data transfer in progress. USB Communication When the Dolphin terminal is docked:

This color and status means Red Solid A USB connection has been established between the Dolphin terminal and the host workstation. 13 - 3 Preliminary Draft 8/12/11 Back Panel Auxiliary Battery Well Green LED USB Port RJ45 Ethernet Port Auxiliary Battery Well Yellow LED DC Power Jack The eBase enables you to charge an additional battery pack independently of the terminal well in 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery. This feature ensures that you can always have a fully charged battery for your terminal. USB Port This USB port is USB v2.0 Hi-Speed compliant. Using a USB cable, you can connect the eBase to a USB compliant device to facilitate USB communication to and from the terminal. USB communication occurs through Microsoft ActiveSync (v4.5 or higher) or Microsoft Windows Mobile Device Center depending on the host workstations operating system. When the terminal is seated in the terminal well, it is connected to the peripheral device via the eBase. Note: ActiveSync on your Dolphin terminal works with Windows Mobile Device Center on host workstations running Windows Vista or Windows 7 and with ActiveSync on host workstations running Windows XP. For detailed information on ActiveSync and Windows Mobile Device Center visit Microsoft's Windows Mobile Web site. RJ45 Ethernet Port Use a standard CAT-5 Ethernet cable; you can connect the ebase to an Ethernet-compliant device to facilitate Ethernet communication to and from the terminal. This color and status means Green Flashing Data transfer in progress. Yellow Solid Solid Off A connection has been established between the Dolphin terminal and the Ethernet. Ethernet is connected at 100T. Ethernet is connected at 10T. 13 - 4 Preliminary Draft 8/12/11 DC Power Jack Use the power cable from Honeywell that comes with the eBase to supply power to this power jack. For more information, see Power on page 13-5. Bottom Panel For details on how to mount the eBase, see Mounting the eBase on page 13-8. Serial Number Label Compliance Label MAC Address Label Power The terminal requires 12 Volts DC input for communications and battery charging; the power adapter on the power cable converts the voltage from the power source to 12 Volts DC. Use only UL Listed power supply with output rated 12VDC, 3A with the device, which has been qualified by Honeywell. The oper-

ating temperature range is -10 to 50C (14 to 122F). Honeywell recommends that you leave the eBase connected to its power source at all times, so that it is always ready to use.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty. Connecting Power to the eBase A/C Power Cord Power Adapter Power Cable 1. Plug the A/C power cord into the power adapter. 2. Plug the power cable into the power connector on the back of the eBase. 3. Plug the A/C power cord into a grounded power source. The Power/Dock LED on the eBase illuminates solid red to indicate the eBase has power and no terminal is docked. 13 - 5 Preliminary Draft 8/12/11 Charging the Main Battery The eBase provides power to the Dolphin terminal and allows the charging of the terminals main battery. The intelligent battery charging system incorporated into all Dolphin terminals prevents overcharging, which means that Dolphin terminals may be stored in the eBase indefinitely with-

out damage to the terminals, battery packs, or the eBase. To check battery power, use the Power system setting; see Power on page 7-16. For more information about Honeywell Li-ion batteries, see Batteries on page 3-13. To Power a Terminal and Charge its Main Battery 1. Install the battery pack in the terminal; see Install the Main Battery Pack on page 2-1. 2. Verify the base has power. If the Power/Dock LED is not illuminated, see Connecting Power to the eBase on page 13-5. 3. Slide the terminal into the terminal well. The Power/Dock LED changes to green. Battery charging begins immediately if required by the Dolphin terminal.

Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty. We recommend use of Honeywell Li-Ion or Li-poly battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. Charging a Spare Battery in the Auxiliary Battery Well The auxiliary battery well located on the back of the base charges a spare battery independently of the terminal well. The Aux Battery LED on the front panel indicates the status of the battery in this well. Charge time is 4 hours for the standard battery pack or 6 hours for the extended battery pack; see Auxiliary Battery Well on page 13-4. 1. Insert the battery at an angle so the battery pack contacts and the auxiliary well contacts align. 2. Snap the battery into place with a hinging motion. The Aux Battery LED lights orange. 3. Use the AUX Battery LED to monitor the charging progress. The LED lights green when the auxiliary battery has completed charging and is ready for use. Note: If the AUX Battery LED flashes red, the internal temperature of the battery is too hot or there is a battery error. Charge the auxiliary battery in a cooler environment or replace the battery with a new Honeywell Li-ion or Li-poly battery. Communication Software Requirements Before you connect the Dolphin terminal to the eBase, make sure you have the most current software installed. To check the terminals system information, tap

> Power Tools > SysInfo. 13 - 6 Preliminary Draft 8/12/11 The Kernel version must be 26.01 or later in terminals running Windows Embedded Handheld 6.5 Classic. In terminals running Windows Embedded Handheld 6.5 Professional, the kernel version must be 25.01 or later. Applications on the Dolphin Terminal Applications running on the Dolphin terminal when it is connected to the eBase should be designed spe-

cifically for a partially connected network. For more details, please refer to the Best Practices for Partially Connected Networks document available at www.honeywellaidc.com. Establishing Ethernet Communication Connecting the Dolphin Terminal to the eBase By default, the Dolphin terminal is configured to obtain IP addresses automatically via DHCP server. This means that in most cases you would simply plug-and-play the unit. 1. Verify the base has power. If the Power/Dock LED is not illuminated, see Connecting Power to the eBase on page 13-5. 2. Plug the CAT-5 Ethernet cable into the RJ45 connector on the back of the eBase. 3. Plug the Ethernet cable into the network. 4. Insert the Dolphin into the terminal well. The DOCK LED for the well changes from red to green and the connection icon on the Dolphins title bar changes from to x

. Note: Instead of using the default for DHCP assigned IP addresses, the Dolphin terminal can use a statically assigned IP address. See standard Microsoft Windows Mobile documentation for how to assign a static IP address to a network adapter. In this case, set a static IP address for the adapter named "SMC95001 USB2.0 FAST Ethernet Drive". Displaying the eBase and Terminal IP Address Once the Dolphin terminal has been successfully connected to the eBase, the terminal uses the eBase IP address. This IP address can be used by any application on the Dolphin terminal. 1. Tap

> Power Tools > Network Utilities > IPConfig. 2. Change the Adapter to SMC95001. 3. On the Input tab, tap the Display full configuration button. 4. The Dolphin terminal retrieves and displays the IP configuration for the entire terminal and eBase. Locate the IpAddress field in the IP configuration list. Establishing USB Communication Dolphin terminals support USB communication out of the box. The eBase also supports USB communi-

cations using the USB port located on the back panel of the eBase. The eBase acts as a USB device by interfacing the USB signals of the Dolphin terminal to the USB of the host workstation. Using a standard USB cable, the ebases USB interface allows the Dolphin terminal to communicate with a host worksta-

tion. 13 - 7 Preliminary Draft 8/12/11 Setting Up and Connecting the Dolphin Terminal to the eBase 1. Verify the base has power. If the Power/Dock LED is not illuminated, see Connecting Power to the eBase on page 13-5. 2. Plug the USB communication cable into the USB port on the back of the eBase. Note: The Dolphin terminal should always be removed from the eBase when connecting or disconnecting the USB cable. 3. Connect the other end of the USB cable to the host workstation. 4. Insert the Dolphin terminal in the eBase terminal well. The Power/Dock LED changes to green and the COMM LED illuminates red. 5. The Dolphin terminal activates and automatically opens ActiveSync to establish a connection. 6. The connection icon in the Dolphins navigation bar changes from to x it indicate a successful connection. The eBase can now transfer data between the terminal and the host device. Mounting the eBase Set the eBase on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is in the eBase. When choosing a location, bear in mind that:

the mounting location must allow users easy access to the Auxiliary Battery Well, and the Ethernet and USB ports as well as the power jack face straight out of the rear panel, and you will most likely want easy access to them in the future. Desk Mounting The DIN rail slot (7.5 X 35 mm) may be mounted on the bottom to allow for secure desk attachment of the unit if desired. Hardware Required 3/16 in. dia x 5/8 in. long pan head screw 1/2 in. OD x 7/32 in. ID x 3/64 in. thick 3/16 in. dia nut Installing the DIN Rail 1. Slide the DIN rail slot along the bottom panel. DIN Rail

(7.5 X 35 mm) 2. Then, using the appropriate nuts and bolts, secure the DIN rail to the desk or flat surface. 13 - 8 14 Preliminary Draft 8/12/11 Dolphin 99EX Mobile Base Device (Model 99EX-MB) Overview This charging and communication cradle is designed specifically for in-premise and in-transit data collec-

tion applications. It features a flexible mounting bracket and a cigarette lighter adapter to adapt it to your environment. The serial connector supports RS232 communication and power out to peripheral devices, such as handheld scanners. The USB connector supports USB communication and power to peripheral devices such as a memory stick or printer. As the hub of your Dolphin mobile data collection system, the base performs three important functions:

charging, communications, and storage. Note:The Mobile Base is not designed for use in hazardous locations. Charging The base completes a full charge of the main battery pack in 4 hours for the standard 3.7V battery pack or 6 hours for the extended 3.7V battery pack. The base also provides power to the intelligent battery charging system in all terminals that senses when a full charge has been achieved and switches to a trickle charge to maintain the full charge. Communications The base supports both RS232 and USB communications. Through the RS232 serial port, you can transmit reliable data communications at speeds of up to 115K baud. By using the Hi-Speed USB (v2.0) port, the data transmission rate goes up to 480 Mbps. Convenient Storage Intelligent battery charging makes the base a safe and convenient storage receptacle for your Dolphin terminal.

We recommend use of Honeywell Li-Ion or Li- poly battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honey-

well peripherals, cables, or power adapters may cause damage not covered by the warranty. 14 - 1 Preliminary Draft 8/12/11 Front Panel Terminal Lock

(not in view) Terminal Well Volume Control Dial

(not in view) Status LED Speaker Terminal Lock Ball Joint for Mounting Bracket USB Communications Port Mounting Bracket Used to mount the base to a fixed location. Speaker Amplifies the Dolphins audio signals. Status LED Illuminates solid green when the Dolphin terminal is properly seated in the terminal well. Terminal Locks The mobile base has a locking switch on the left and right side. Pushing one of the switches up locks the terminal in the base. To unlock the terminal push either switch down. Terminal Well Place the terminal in this well. Once seated, the terminal can communicate with a host device and its main battery pack begins charging. USB Communications Port This USB Port is host Hi-Speed 2.0v compliant. You can connect the base to a peripheral device, such as a memory stick or to a printer using a USB cable. When the terminal is seated in the terminal well, it is connected to the peripheral device via the base. Volume Control Dial The speaker volume is adjusted via the dial located on the side of the base. 14 - 2 Preliminary Draft 8/12/11 Bottom Panel The power supply and RS232 connectors are located on the bottom of the unit. Power Supply Connector RS232 Communications Port Power Supply Connector To run on vehicle power, you can use the 12 VDC cable. The appropriate cable comes with the kit you ordered. The 12 VDC cable can be used with a cigarette lighter outlet.

Verify that the power source is always within the specified range and observe correct input voltage polarity. An improper input voltage range or reverse polarity could damage the power conversion circuitry. RS232 Communications Port Use a standard serial cable to connect the unit to a host device via RS232; see Serial Connector on page 14-8. 14 - 3 Preliminary Draft 8/12/11 Back Panel and Mounting Brackets Base USB Port Bracket Mounting Bracket Turnscrew Power supply and RS232 connectors (not in view) Ball Joint Ball Joint Ball Joints There are two ball joints: one on the back of the base and one on the mounting bracket. Both ball joints are inserted into the bracket and secured to mount the base. Connectors The power and RS232 connectors are located on the bottom panel. For more information, see Bottom Panel on page 14-3. Bracket The bracket contains the turnscrew and two slots. Ball joints are inserted into each slot and secured with the turnscrew. Turnscrew The turnscrew is located on the top of the bracket. Rotate the turnscrew to secure or loosen the ball joint slots. Mounting Bracket The mounting bracket is what you attach to the mounting surface. It is comprised of a ball joint and flat disk. The disk contains drill holes you use to secure the base to the mounting surface. 14 - 4 Preliminary Draft 8/12/11 Mounting The adjustable mounting bracket holds the terminal securely in place and gives the user a variety of options for mounting the base. Safety Precautions Honeywell is not responsible for any damages caused to you, your vehicle, or other individuals due to the installation of the Dolphin Mobile mount. Follow these safety precautions when mounting the mobile base:

Never drill into a surface in your vehicle without first consulting a mobile installation professional experienced with your vehicle type to avoid damaging the vehicle's safety features, gas tank, elec-

trical system or other sensitive vehicle components. Do not install the Mobile base in an air bag deployment zone. Honeywell assumes no responsibility of liability for injury or death because of car crashes and/or air bag deployment. Do not mount the base in a location where it prevents safe operation of the vehicle and/or impedes the vehicle operator's field of view. Do not mount the base in a location where the connectors on the bottom panel of the base are not easily accessible. Be sure to leave enough room for unrestricted cable connections. The Mobile base is intended for use in an enclosed space protected from the elements. Do not mount the Mobile base on external vehicle surfaces. Select a mounting surface that is flat and smooth like the console area in the vehicle located between the seats.

Installation Mounting hardware is not included. You must provide the appropriate hardware for your particular appli-

cation and vehicle type. To ensure a safe installation, consult a mobile installation professional experienced with your vehicle type. 1. Using the bracket as a template, mark the locations for the mount-

ing screws. 2. Drill the appropriate size pilot holes in the mounting surface. 3. Secure the mounting bracket to the mounting surface using the appropriate screw type for your application and vehicle type. 4. Loosen the turnscrew. 5. 6. Insert the ball joint of the mounting bracket to the back of the bracket. Insert the ball joint on the back of the base into the other side of the bracket. 7. Tighten the turnscrew to secure both ball joints. 14 - 5 Preliminary Draft 8/12/11 Powering the Dolphin Terminal When seated in a base that is connected to the appropriate power source, the Dolphin terminal receives the power to charge its main battery and run its internal circuitry. Keep the base plugged into the power source so that the Dolphin terminal battery pack stays fully charged. Note: Honeywell recommends that you leave the base connected to its power source at all times. The base is powered via the power connector on the bottom panel; see Bottom Panel on page 14-3. Both the power and serial connectors are straight out, not at an angle. The base requires a 12 VDC power input. Charging the Dolphin Terminal The base supplies charging power to the Dolphin terminal so that the terminal can monitor the charging of its battery pack. This charging method protects the battery from being damaged by overcharging. Therefore, the Dolphin terminal may be stored indefinitely in the base without damage to the terminal, the battery pack, or the base. 1. Insert a battery pack into the terminal. 2. Slide the terminal, imager window up and the LCD visible, into the terminal well until it stops. 3. When the terminal is properly seated, the DOCK LED on the base illuminates solid green. The terminal begins charging automatically. Establishing Communication The RS232 interface allows the terminal to communicate to a workstation, modem, any standard RS232 device using a standard RS232 and communications software. Requirements You need the following equipment:

A Mobile Base device powered by a power adapter cable For RS232 communications, a serial cable ActiveSync v4.5 or above or Windows Mobile Device Center on the host workstation Windows 98 Second Edition, Windows Me, Windows 2000, Windows NT (4.0 SP6 or higher), Windows XP, Windows Vista or Windows 7 on the host workstation. Connecting the Communication Cables Note: You must be using ActiveSync (4.5 or higher) or Windows Mobile Device Center. 1. Plug in the power supply and connect it to the bottom of the base. 2. Plug the RS232 communication cable into the appropriate connector on base. 3. Connect the other end of the communication cable into the back of the workstation. 4. At this point, the hardware is installed and operating. You may need to reboot your workstation to complete the installation process. 14 - 6 Preliminary Draft 8/12/11 Establishing ActiveSync or Windows Mobile Device Center Communication The Dolphin terminal is usually auto-detected and configured by ActiveSync or Windows Mobile Device Center based on the communication cable. The synchronization software automatically sets up an RS232 connection when you are using an RS232 cable. For more details, see Connecting and Synchronizing the Terminal and Workstation on page 8-8. RS232 Communication Cables Connect the base to the host workstation or other device by plugging an RS232 serial cable into the RS232 Communications Port on the bottom of the base. Plug the other end of the RS232 serial cable into the correct port on the host RS232 device. The wiring of your cable depends on whether the other device is set up as a Data Communications Equipment (DCE) or Data Terminal Equipment (DTE) device. The Communication Port is configured as a DCE device. To communicate with a DTE device such as a workstation, use a standard (or straight-through) RS232 cable. To communicate with a DCE device, use either a null modem adapter in line with a standard RS232 cable, or a null-modem serial cable. You can make your own cables by following the pin configuration in the chart that follows. To do so, you must determine if your host RS232 device is 9-pin or 25-pin, and whether it is configured as a DCE or DTE device. RS232 Pin Configuration Base/Host Port (DCE) IBM AT DB9

(DTE) IBM XT DB25

(DTE) Modem DB25

(DCE) Pin / Input Signal 2 / (RD) 3 / (TD) 5 / (SG) 4 / (DTR) 6 / (DSR) 7 / (RTS) 8 / (CTS) 2 3 5 4 6 7 8 3 2 7 20 6 4 5 2 3 7 6 20 5 4 Note: The input signal names are reference to the DTE target device (i.e., workstation or host computer) in accordance with the RS232 standard. 14 - 7 Preliminary Draft 8/12/11 Serial Connector The following diagram displays the pin diagram of the serial connector of the base. Pin Description 1 2 3 4 5 6 7 8 9 Internal Jumper to Pin 6 TXD RXD No Connect GND DTR CTS RTS RI Note: The signal names are referenced to the terminal. The terminal is a DCE RS232 device. Refer to section, RS232 Communications Cables and RS232 Pin Configuration for more details.The ninth pin has a ring indicator (RI). 14 - 8 15 Preliminary Draft 8/12/11 Dolphin 99EX ChargeBase Device (Model 99EX-CB) Overview The 99EX ChargeBase is a 4-slot charging cradle that can power 4 Dolphin terminals, and charge their main batteries in 4 hours for the standard battery or 6 hours for the extended battery. The 99EX-CB charger is designed for use with battery pack models 99EX-BTSC (standard Li-poly 3.7 V, 11.3 watt hour) and 99EX-BTEC (extended Li-ion 3.7 V, 18.5 watt hour) manufactured by Honeywell International Inc. and with Dolphin 99EX and 99GX model terminals.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty. The ChargeBase is not designed for use in hazardous locations. Unpacking the ChargeBase Open the shipping box and inspect the package to see that the following standard items are included:

One Dolphin ChargeBase, model 99EX-CB One power supply (see Power on page 15-3) One power cord These items are needed to operate the ChargeBase. If any items are missing or anything appears to be damaged, contact your Customer Account Representative. Keep the original packaging in case you need to return the ChargeBase for service or to store the ChargeBase while not in use. Charging The base supplies power to the intelligent battery charging system in all Dolphin terminals, which senses when a full charge has been achieved and switches to a trickle charge to maintain the full charge. As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-ion or Li-poly batteries. The process monitors changes in temperature, current, and voltage. The main battery of each terminal charges in 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery. Convenient Storage Intelligent battery charging makes this base a safe and convenient storage receptacle for your Dolphin terminal. Capacity The base can hold up to 4 Dolphin terminals. Each charging well charges each terminal independently of the other wells.

We recommend use of Honeywell Li-Ion or Li-poly battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. 15 - 1 Preliminary Draft 8/12/11 Parts and Functions Front Panel Terminal Wells Power/Dock LED Charge LED Terminal Wells The base contains four terminal wells. Each well has its own dedicated Power/Docking LED and Charging LED indicator. Power/Dock LEDs The Power/Dock LED indicates if the ChargeBase has power and if the terminal is properly seated in the terminal well. Each terminal well has its own dedicated Power/Dock LED. This color means Red Green Charge LEDs The ChargeBase has power but no terminal is docked. The ChargeBase has power and the terminal is properly seated in the well facilitating communication between the base and terminal Each terminal well has a dedicated Charge LED located on the front of the base. When a Dolphin is docked in a terminal well, the Charge LED illuminates green to indicate power is being applied to the Dolphin. The Battery Icon in the Dolphin window terminal is running on external power. If a battery pack is installed, the battery is charging in the background. indicates the When the Dolphin is removed from the base, the battery icon indicates the charge level of the main battery pack, see Icons in the Title Bar on page 2-5. For additional information on how to check the power levels of the main battery pack and the backup battery, while the terminal is docked, see Checking Battery Power on page 3-16. For details on how to charge the terminal using the ChargeBase, see Charging the Main Battery on page 15-4. 15 - 2 Preliminary Draft 8/12/11 Back Panel Power Supply Connector Power Supply Connector This connector receives input from the power adapter. Plug the power connector cable from the power adapter into this connector. Power The terminal requires 12 Volts DC input for battery charging; the power adapter on the power cable con-

verts the voltage from the power source to 12 volts DC. Use only UL Listed power supply with output rated 12VDC, 8.5A with the device, which has been qualified by Honeywell. The operating temperature range is -10 to 50C (14 to 122F). Honeywell recommends that you leave the ChargeBase connected to its power source at all times, so that it is always ready to use.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty. A/C Power Cord Connecting Power to the ChargeBase 1. Plug the A/C power cord into the power adapter. 2. Plug the power connector cable into the power connector on the back panel of the ChargeBase. 3. Plug the A/C power cord into a standard wall outlet. The LED on the Power Adapter illuminates to indicate power. 4. All of the Power/Dock LEDs illuminate red to indicate the base has power. Terminal wells with properly docked Dolphins indicate power with a green LED. 5. The base is ready to begin charging terminals. LED Power Adapter Power Connector Cable 15 - 3 Draft 8/12/11 Charging the Main Battery The base provides power to the Dolphin terminals and allows charging of the main batteries in the terminals. The main battery of each terminal charges in 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery. The intelligent battery charging system incorpo-

rated into all Dolphin terminals prevents overcharging, which means that Dolphin terminals may be seated in the base indefinitely without damage to the terminals, battery packs, or the base. To Power a Terminal and Charge its Main Battery 1. Install the main battery pack in the termina; see Install the Main Battery Pack on page 2-1. 2. Verify the base has power. If the Power/Dock LEDs are not illuminated, see Connecting Power to the ChargeBase on page 15-3. 3. Slide the Dolphin terminal into one of the four terminal wells. The the Power/Dock LED for the well changes to green. Charging begins immediately if required by the Dolphin terminal.

Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty. We recommend use of Honeywell Li-Ion or Li-poly battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. Mounting the ChargeBase This base should be mounted to a dry, stable surface. When choosing a location, always bear in mind that:

The mounting location must allow users easy access to the power connector. The base should be oriented so that users can easily see the LEDs. Bottom Panel DIN Rail Slot Rubber Feet, Qty. 8 Mounting Holes for Wall Mount Bracket Hardware, Qty. 4 Desk Mounting The DIN Rail (7.5 X 35 mm) slot on the bottom panel enables secure mounting on a horizontal surface. 15 - 4 Preliminary Draft 8/12/11 Hardware Required 3/16 in. dia x 5/8 in. long pan head screw 1/2 in. OD x 7/32 in. ID x 3/64 in. thick 3/16 in. dia nut Installing the DIN Rail 1. Slide the DIN Rail into the DIN Rail slot on the bottom panel of the base. 2. Turn the base and DIN Rail right side up. 3. Then, using the appropriate nuts and bolts, secure the DIN Rail to a stable, flat horizontal surface. DIN Rail (7.5 X 35 mm) Wall Mounting The optional wall mount bracket enables secure mounting of the base on a vertical surface. The wall mount bracket can be used in conjunction with the DIN rail but does not require the DIN Rail for use. Hardware (Provided) M3 x 9 mm self-tapping screws, #2 Phillips, Qty. 4 3/8 in. x 4 in. round head toggle bolt, 2-5/8 in. usable length, Qty. 4 3/8 in. x 2 1/2 in. length Hex Head Lag Screw, Qty. 4 Tools Required Drill 7/8 in. Drill Bit (for hollow wall installations) or 1/4 in. Drill Bit (for wood stud installation) Phillips Screw Driver 15 - 5 Preliminary Draft 8/12/11 Hollow Wall Installation 1. Drill four pilot holes in the wall using a 7/8 in. drill bit. 13.78 in.

[ 35 cm ]

6.5 in.

[16.5 cm]

Wall Mount Holes Wall Mount Braket 2. Slide the bolt through the wall bracket, and thread the toggle nut onto the bolt. 3. Press the ends of the toggle nut together, and insert the bolt/nut into the pilot hole until the nut clears inside wall surface. The toggle nut should spring open preventing the screw from being removed. Toggle Nut Bolt Bracket 4. Repeat steps 2 and 3 for each of the remaining mounting holes. Wall 5. Tighten all four bolts to secure the bracket to the wall. 6. Once the bracket is installed, secure the base to the wall bracket, see Securing the Base to the Wall Bracket for detailed instructions. Wall Open Toggle Nut Wood Stud Installation 1. Drill four pilot holes in the wall/wood stud using the 1/4 in. drill bit. Bracket 2. Secure the bracket to the wall using the four Hex Head Lag Screws provided. 3. Once the bracket is installed, secure the base to the wall bracket, see Securing the Base to the Wall Bracket for detailed instructions. Securing the Base to the Wall Bracket You can secure the base to the wall bracket by using the self tapping screws provided or you can use the optional DIN Rail. To secure the base using the self tapping screws:

1. Position the base on the wall bracket, as shown. 2. Secure the base to the bracket using the four M3 x 9 mm self-tapping screws. Wall Bracket M3 x 9 mm Self-tapping Screws, Qty. 4 15 - 6 Draft 8/12/11 To secure the base using the optional DIN Rail:

Hardware Required DIN Rail, Qty. 1 3/16 in. dia x 5/8 in. long pan head screw, Qty. 2 1/2 in. OD x 7/32 in. ID x 3/64 in. thick washer, Qty. 2 3/16 in. dia nut, Qty. 2 1. Position the DIN Rail on the wall bracket, as shown below. 2. Slide the screw through the slot on the DIN Rail and the mounting hole in the bracket. 3. Slide the washer onto the screw and tigthen the nut to secure the assembly. Wall Bracket, Qty. 1 Screw, Qty. 2 Washer, Qty. 1 Nut, Qty. 1 DIN Rail, Qty. 1 Washer, Qty. 1 Nut, Qty. 1 4. Remove the rubber feet on the bottom of the ChargeBase. 5. Slide the base onto the DIN Rail using the slot on the bottom of the base. Wall Bracket Wall Bracket DIN Rail 15 - 7 Draft 8/12/11 Channel Bracket Installation (Pre-existing Hardware Installations) When choosing a location and installing the optional channel bracket:

Do not exceed 150 lbs. maximum load on the channel bracket. Leave a minimum of 16 in. (40.64 cm) of horizontal space between the hardware used to attach the channel bracket to the wall. An electrical outlet must be easily accessible. The mounting location should be dry, stable, easily accessible, and well lighted. Tools Required Drill 7/8 in. Drill Bit (for hollow wall installations) or 1/4 in. Drill Bit (for wood stud installations)

#2 Phillips Screw Driver Medium Flat Head Screw Driver 9/16 in.Socket Wrench Hardware Required 3/8 in.-16 spring nut, for 13/16 in. deep strut, Qty. 4 per wall bracket 3/8 in. flat washer, Qty. 4 per wall braket 3/8 in.-16 x 1.00 in., cap screw, grade 5, Qty. 4 per wall bracket Hollow Wall Installations:

3/8 in. x 4 in. round head toggle bolt, 2-5/8 in. usable length, Qty. 4 3/8 in. flat washer, Qty. 4 Wood Stud Installations:

3/8 in. x 2 1/2 in. length hex head lag screw, Qty. 4 3/8 in. fat washer, Qty. 4 Installation 1. Slide the spring nuts into the channel of the bracket and position them to line up with the mounting holes on the wall bracket. Spring Nut Wall Bracket 13.78 in.

[ 35 cm ]

6.5 in.

[16.5 cm]

Wall Mount Holes Channel Bracket 15 - 8 Preliminary Draft 8/12/11 2. Attach the channel bracket to a dry, stable surface using the hardware listed on page 15-8 for the appropriate mounting surface. Mounting into Wood Stud Wahser, Qty. 4 Channel Bracket Lag Bolt, Qty. 4 Minimum 16 in. (40.64 cm) Mounting into Hollow Surface Toggle Nut, Qty. 4 Channel Bracket Washer, Qty. 4 Toggle Bolt, Qty. 4 Minimum 16 in. (40.64 cm) 3. Align the mounting holes on the wall bracket with the spring nuts installed in the channel bracket. Secure the wall bracket in place using the cap screws listed on page 15-8. 4. See Securing the Base to the Wall Bracket (page 15-6) for detailed instructions on securing the ChargeBase to the wall bracket. 15 - 9 Preliminary Draft 8/12/11 15 - 10 16 Preliminary Draft 8/12/11 Dolphin 99EX Net Base Device (Model 99EX-NB) Overview The Net Base enables up to four Dolphin 99EX mobile computers to communicate with a host device over an Ethernet network. In addition, the Net Base provides a second RJ45 Ethernet port for connec-

tion to an additional device such as a printer, workstation, eBase, or another Net Base. The 99EX-NB charger is designed for use with battery pack models 99EX-BTSC (standard Li-poly 3.7 V, 11.3 watt hour) and 99EX-BTEC (extended Li-ion 3.7 V, 18.5 watt hour) manufactured by Honeywell International Inc. and with Dolphin 99EX and 99GX model terminals.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty. The Net Base is not designed for use in hazardous locations. Unpacking the Net Base Open the shipping box and inspect the package to see that the following standard items are included:

One Dolphin Net Base Ethernet cradle, model 99EX-NB One power supply (see Power on page 16-4) One power cord You will also need to provide a standard CAT-5 Ethernet network cable. These items are needed to set up and operate the Net Base. If any items are missing or anything appears to be damaged, contact your Customer Account Representative. Keep the original packaging in case you need to return the Net Base for service or to store the Net Base while not in use. Charge Time The base supplies power to the intelligent battery charging system in all Dolphin terminals, which senses when a full charge has been achieved and switches to a trickle charge to maintain the full charge. As battery packs charge, the charging circuitry follows the two-step charging process (CC-CV) that is recommended for Li-ion or Li-poly batteries. The process monitors changes in temperature, current, and voltage. The main battery of each terminal charges in 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery. Convenient Storage Intelligent battery charging makes this base a safe and convenient storage receptacle for your Dolphin terminal. Capacity The base can hold up to 4 Dolphin terminals. Each charging well charges each terminal independently of the other wells.

We recommend use of Honeywell Li-ion or Li-poly battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. 16 - 1 Preliminary Draft 8/12/11 Parts and Functions Front Panel Terminal Wells Power/Dock LED COMM LED Terminal Wells The Net Base contains four terminal wells. Each well has its own dedicated Power/Dock LED and COMM LED indicator. Place the Dolphin terminal in any one of the four wells to communicate with a host device, power the terminal, and charge the installed battery pack. The Net Base completely charges the main battery in a Dolphin terminal in 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7 battery. Power/DOCK LED Indicates if power is supplied to the Net Base and if a terminal is docked properly in the terminal well. Each terminal well has its own dedicated Dock LED. This color means Red Green COMM LED The Net Base has power but no terminal is docked. The Net Base has power and the terminal is properly seated in the base. The COMM LED indicates the status of connection and data transfer between the Dolphin terminal and the Net Base. Each terminal well has its own dedicated COMM LED. When the Dolphin terminal is docked:

This color and status means Green Green Solid A connection has been established between the Dolphin terminal and the Net Base. Flashing Data transfer in progress. Note: The COMM LED does not necessrily indicate the Net Base and terminal are connected to a valid Ethernet link. For more information, see RJ45 Ethernet Ports on page 16-3. 16 - 2 Preliminary Draft 8/12/11 Back Panel Green LED Yellow LED Port 1: 10/100Mbps RJ45 Ethernet Port Port 2: 100Mbps Only RJ45 Ethernet Port DC Power Jack DC Power Jack Use the power cable from Honeywell that comes with the Net Base to supply power to this power jack. For more information, see Power on page 16-4. RJ45 Ethernet Ports The Net Base contains two RJ45 Ethernet ports. You can connect the Net Base to an Ethernet-

compliant device to facilitate Ethernet communication to and from the terminal by plugging a standard CAT-5 Ethernet cable into one of the two Ethernet ports provided. The second RJ45 Ethernet port can be used for connection to an additional device such as a printer, workstation, eBase, or another Net Base. Note: The Net Base does not use a Spanning Tree Protocol (STP). When both RJ45 Ethernet ports are used, do not connect both Net Base interfaces to the same layer 2 LAN. Note: Ethernet Port 2 only supports 100Mbps Ethernet connections. Plugging in a 10Mbps connection into Port 2 may cause other ports to stop working. For 10Mbps connections use Ethernet Port 1. Each Ethernet port has a dedicated green and yellow status LED. This color and status means Green Flashing Data transfer is in progress. Yellow Solid Solid Off A connection has been established between the Net Base and the Ethernet. Ethernet is connected at 100T. Ethernet is connected at 10T. Note: The terminal and Ethernet link must be set up properly to allow the terminal to communicate to other devices and/or the Internet. For more information, see Connecting the Dolphin Terminal to the Net Base on page 16-5. 16 - 3 Preliminary Draft 8/12/11 Bottom Panel For details on how to mount the Net Base, see Mounting the Net Base on page 16-6. Compliance Label Serial Number Label MAC Address Label Power The terminal requires 12 Volts DC input for communications and battery charging; the power adapter on the power cable converts the voltage from the power source to 12 volts DC. Use only UL Listed power supply with output rated 12VDC, 8.5A with the device, which has been qualified by Honeywell. The oper-

ating temperature range is -10 to 50C (14 to 122F). Honeywell recommends that you leave the Net Base connected to its power source at all times, so that it is always ready to use.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty. Connecting Power to the Net Base A/C Power Cord LED Power Adapter Power Connector Cable 1. Plug the A/C power cord into the power adapter. 2. Plug the power connector cable into the power connector on the back of the Net Base. 3. Plug the A/C power cord into a standard wall outlet. The LED on the Power Adapter illuminates to indicate power. 4. All four Power/Dock LEDs illuminate solid red to indicate the base has power. Terminal wells with properly docked Dolphins indicate power with a green LED. 5. The base is ready to begin charging terminals. 16 - 4 Preliminary Draft 8/12/11 Charging the Main Battery The base provides power to the Dolphin terminals and allows the charging of the main batteries in the terminals. The main battery of each terminal charges in 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery. The intelligent battery charging system incorporated into all Dolphin terminals prevents overcharging, which means that Dolphin terminals may be stored in the base indefi-

nitely without damage to the terminals, battery packs, or the base. To Power a Terminal and Charge its Main Battery 1. Install the main battery pack in the terminal; see Install the Main Battery Pack on page 2-1. 2. Verify the base has power. If the Power/Dock LEDs are not illuminated, see Connecting Power to the Net Base on page 16-4. 3. Slide the Dolphin terminal into one of the four terminal wells. The the Power/Dock LED for the well changes to green. Charging begins immediately if required by the Dolphin terminal.

Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty. We recommend use of Honeywell Li-Ion or Li-poly battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. Communication Software Requirements Before you connect the Dolphin terminal to the Net Base, make sure you have the most current software installed. To check the terminals system information, tap The Kernel version must be 26.01 or later in terminals running Windows Embedded Handheld 6.5

> Power Tools > SysInfo. Classic. In terminals running Windows Embedded Handheld 6.5 Professional, the kernel version must be 25.01 or later. Applications on the Dolphin Terminal Applications running on the Dolphin terminal when it is connected to the Net Base should be designed specifically for a partially connected network. For more details, please refer to the Best Practices for Par-

tially Connected Networks document available at www.honeywellaidc.com. Connecting the Dolphin Terminal to the Net Base By default, the Dolphin terminal is configured to obtain IP addresses automatically using a DHCP server. This means that in most cases, you would simply plug-and-play the unit. 1. Verify the base has power. If the Power/Dock LEDs are not illuminated, see Connecting Power to the Net Base on page 16-4. 2. Plug the CAT-5 Ethernet cable into one of the RJ45 connectors on the back of the Net Base. 16 - 5 Preliminary Draft 8/12/11 3. Plug the Ethernet cable into the network. 4. Insert the Dolphin into one of the terminal wells. The DOCK LED for the well changes from red to green and the connection icon on the Dolphins title bar changes from to x

. 5. By default, the DHCP server assigns a unique IP address to each of the Dolphin terminals docked in the Net Base. This IP address can be used by any application on the Dolphin terminal. Note: Instead of using the default for DHCP assigned IP addresses, the Dolphin terminal can use a statically assigned IP address. See standard Microsoft Windows Mobile documentation for how to assign a static IP address to a network adapter. In this case, set a static IP address for the adapter named "SMC95001 USB2.0 FAST Ethernet Drive". Displaying the Net Base Terminal Well and Dolphin IP Address Once the Dolphin terminal establishes communication, it uses the unique IP address assigned to the ter-

minal well it is docked in on the Net Base. If four Dolphin terminals are successfully connected, then four different IP addresses are assigned to the adapter associated with the Dolphin terminal. 1. Tap

> Power Tools > Network Utilities > IPConfig. 2. Change the Adapter to SMC95001. 3. On the Input tab, tap the Display full configuration button. 4. The Dolphin terminal retrieves and displays the IP configuration for the entire Dolphin terminal and the Net Base terminal well where the Dolphin is docked. 5. Locate the IpAddress field in the IP configuration list. Mounting the Net Base Set the Net Base on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure to provide enough workspace with good lighting for the user to view and operate the Dolphin termi-

nal while it is in the Net Base. When choosing a location, bear in mind that the mounting location must allow users easy access to the terminal wells, the Ethernet ports, and the power jack. Bottom Panel DIN Rail Slot Rubber Feet, Qty. 8 Mounting Holes for Wall Mount Bracket Hardware, Qty. 4 16 - 6 Preliminary Draft 8/12/11 Desk Mounting The DIN Rail (7.5 X 35 mm) slot on the bottom panel enables secure mounting on a horizontal surface. Hardware Required 3/16 in. dia x 5/8 in. long pan head screw 1/2 in. OD x 7/32 in. ID x 3/64 in. thick 3/16 in. dia nut Installing the DIN Rail 1. Slide the DIN Rail into the DIN Rail slot on the bottom panel of the base. 2. Turn the base and DIN Rail right side up. 3. Then, using the appropriate nuts and bolts, secure the DIN Rail to a stable, flat horizontal surface. DIN Rail (7.5 X 35 mm) Wall Mounting The optional wall mount bracket enables secure mounting of the base on a vertical surface. The wall mount bracket can be used in conjunction with the DIN rail but does not require the DIN Rail for use. Hardware (Provided) M3 x 9 mm self-tapping screws, #2 Phillips, Qty. 4 3/8 in. x 4 in. round head toggle bolt, 2-5/8 in. usable length, Qty. 4 3/8 in. x 2 1/2 in. length Hex Head Lag Screw, Qty. 4 Tools Required Drill 7/8 in. Drill Bit (for hollow wall installations) or 1/4 in. Drill Bit (for wood stud installation) Phillips Screw Driver 16 - 7 Preliminary Draft 8/12/11 Hollow Wall Installation 1. Drill four pilot holes in the wall using a 7/8 in. drill bit. 13.78 in.

[ 35 cm ]

6.5 in.

[16.5 cm]

Wall Mount Holes Wall Mount Braket 2. Slide the bolt through the wall bracket, and thread the toggle nut onto the bolt. 3. Press the ends of the toggle nut together, and insert the bolt/nut into the pilot hole until the nut clears inside wall surface. The toggle nut should spring open preventing the screw from being removed. Toggle Nut Bolt Bracket 4. Repeat steps 2 and 3 for each of the remaining mounting holes. Wall 5. Tighten all four bolts to secure the bracket to the wall. 6. Once the bracket is installed, secure the base to the wall bracket, see Securing the Base to the Wall Bracket for detailed instructions. Wall Open Toggle Nut Wood Stud Installation 1. Drill four pilot holes in the wall/wood stud using the 1/4 in. drill bit. Bracket 2. Secure the bracket to the wall using the four Hex Head Lag Screws provided. 3. Once the bracket is installed, secure the base to the wall bracket, Securing the Base to the Wall Bracket for detailed instructions. Wall Bracket Securing the Base to the Wall Bracket You can secure the base to the wall bracket by using the self tapping screws provided or you can use the optional DIN Rail. To secure the base using the self tapping screws:

1. Position the base on the wall bracket, as shown. 2. Secure the base to the bracket using the four M3 x 9 mm self-tapping screws provided. M3 x 9 mm Self-tapping Screws, Qty. 4 16 - 8 Draft 8/12/11 To secure the base using the optional DIN Rail:

Hardware Required DIN Rail, Qty. 1 3/16 in. dia x 5/8 in. long pan head screw, Qty. 2 1/2 in. OD x 7/32 in. ID x 3/64 in. thick washer, Qty. 2 3/16 in. dia nut, Qty. 2 1. Position the DIN Rail on the wall bracket, as shown below. 2. Slide the screw through the slot on the DIN Rail and the mounting hole in the bracket. 3. Slide the washer onto the screw and tigthen the nut to secure the assembly. Wall Bracket, Qty. 1 Screw, Qty. 2 Washer, Qty. 1 Nut, Qty. 1 DIN Rail, Qty. 1 Washer, Qty. 1 Nut, Qty. 1 4. Remove the rubber feet on the bottom of the Net Base. 5. Slide the base onto the DIN Rail using the slot on the bottom of the base. Wall Bracket Wall Bracket DIN Rail 16 - 9 Draft 8/12/11 Channel Bracket Installation (Pre-existing Hardware Installations) When choosing a location and installing the optional channel bracket:

Do not exceed 150 lbs. maximum load on the channel bracket. Leave a minimum of 16 in. (40.64 cm) of horizontal space between the hardware used to attach the channel bracket to the wall. An electrical outlet must be easily accessible. The mounting location should be dry, stable, easily accessible, and well lighted. Tools Required Drill 7/8 in. Drill Bit (for hollow wall installations) or 1/4 in. Drill Bit (for wood stud installations)

#2 Phillips Screw Driver Medium Flat Head Screw Driver 9/16 in.Socket Wrench Hardware Required 3/8 in.-16 spring nut, for 13/16 in. deep strut, Qty. 4 per wall bracket 3/8 in. flat washer, Qty. 4 per wall braket 3/8 in.-16 x 1.00 in., cap screw, grade 5, Qty. 4 per wall bracket Hollow Wall Installations:

3/8 in. x 4 in. round head toggle bolt, 2-5/8 in. usable length, Qty. 4 3/8 in. flat washer, Qty. 4 Wood Stud Installations:

3/8 in. x 2 1/2 in. length hex head lag screw, Qty. 4 3/8 in. fat washer, Qty. 4 Installation 1. Slide the spring nuts into the channel of the bracket and position them to line up with the mounting holes on the wall bracket. Spring Nut Wall Bracket 13.78 in.

[ 35 cm ]

6.5 in.

[16.5 cm]

Wall Mount Holes Channel Bracket 16 - 10 Preliminary Draft 8/12/11 2. Attach the channel bracket to a dry, stable surface using the hardware listed on page 16-10 for the appropriate mounting surface. Mounting into Wood Stud Wahser, Qty. 4 Channel Bracket Lag Bolt, Qty. 4 Minimum 16 in. (40.64 cm) Mounting into Hollow Surface Toggle Nut, Qty. 4 Channel Bracket Washer, Qty. 4 Toggle Bolt, Qty. 4 Minimum 16 in. (40.64 cm) 3. Align the mounting holes on the wall bracket with the spring nuts installed in the channel bracket. Secure the wall bracket in place using the cap screws listed on page 16-10. 4. See Securing the Base to the Wall Bracket (page 16-8) for detailed instructions on securing the Net Base to the wall bracket. 16 - 11 Preliminary Draft 8/12/11 16 - 12 17 Preliminary Draft 8/12/11 Dolphin 99EX QuadCharger Device (Model 99EX-QC) Overview This 4-slot charging station provides intelligent battery management for the rechargable battery packs used in Dolphin terminals. The 99EX-QC charger is designed for use with battery pack models 99EX-BTSC (standard Li-poly 3.7 V, 11.3 watt hour) and 99EX-BTEC (extended Li-ion 3.7 V, 18.5 watt hour) manufactured for Honeywell International Inc. Note:The QuadCharger is not designed for use in hazardous locations. Capacity The charger holds 4 Honeywell 3.7V Li-ion or 3.7V Li-poly batteries. Charging Time Charge time is 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery. Charging Process Each charging slot works independently of the other three. As battery packs charge, the charging cir-

cuitry follows the two-step charging process (CC-CV) that is recommended for Li-ion and Li-poly batter-

ies. The process monitors changes in temperature, current, and voltage and resets the battery pack.

We recommend use of Honeywell Li-Ion or Li-poly battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honey-

well peripherals, cables, or power adapters may cause damage not covered by the warranty. 17 - 1 Preliminary Draft 8/12/11 Parts and Functions Top Panel Charging Slots (4) Power LED Status LEDs One Per Charging Slot Charging Slots There are 4 charging slots. Each slot holds one Li-ion or Li-poly battery and charges it independently of the other slots. When a battery is placed in each slot, it immediately begins charging. Power LED The power LED indicates if the QuadCharger is powered and operational. When the QuadCharger is receiving power, the LED illuminates green. Power Supply Connector You attach the power supply to this connector. See Supplying Power on page 17-3. Status LEDs A status LED is located at one corner of each of the 4 battery slots. The color of the LED indicates the charge status of the batteries in its slot. Color This color indicates that the battery in the slot Green (Solid) Has completed its charge cycle and is ready for use. Orange (Solid) Is being charged at a maximum charge rate. Red (Flashing) The internal temperature of the auxiliary battery is too hot or there is a battery error. Charge the auxiliary battery in a cooler environment or replace the battery with a new Honeywell Li-ion or Li-poly battery. For more information, see Troubleshooting on page 17-5. 17 - 2 Preliminary Draft 8/12/11 Supplying Power The charger must be connected to a power source via the Honeywell power adapter cable so that volt-

age is adjusted appropriately. Use only the Honeywell recommended UL Listed power supply with out-

put rated 12VDC, 3A with the device. 1. Locate the AC power adapter cable and plug it into the power source. 2. Connect the power cable to the power adapter. 3. Connect the power cable to the supply connector on the back of the charger. Power LED Power Supply Connector 4. The power LED illuminates green, and the charger performs a self-diagnostic test that lasts approximately five seconds. Recommendations for Storing Batteries To maintain top performance from batteries, avoid storing batteries outside of the following temperature ranges:

14F to 113F (-10C to +45C) for short term storage of less than one month 32F to 86F (-0C to +30C) for long term storage Do not store batteries in extremely high humidity. For prolonged storage, do not keep batteries stored in a charger that is connected to a power source. Inserting and Charging Batteries For best results, battery packs should be at room temperature before recharging them; temperature has a marked effect on charging. The recommended temperature range is 50F to 95 F (10C to 35 C). 1. Set up the charger, see Supplying Power above. 2. Power the charger. The Power LED illuminates green. 3. Insert the battery at an angle so the battery pack contacts and the QuadCharger contacts align. 4. Snap the battery into place with a hinging motion. 5. The Status LED for that particular slot illuminates orange to indicate the battery is seated properly and the charging cycle has begun. 6. When the Status LED turns green, the battery in the slot has completed charging. 17 - 3 Preliminary Draft 8/12/11 Mounting the QuadCharger The charger should be on a dry, stable surface and can be mounted on a flat, horizontal surface such as a desktop or workbench. When choosing a location, always bear in mind that:

the mounting location must allow users easy access to the power connector. the charger should be oriented so that users can easily insert and remove battery packs and see the LEDs. Bottom Panel 3.94 in.

[10 cm]

DIN Rail Slot Rubber Feet, Qty. 4 Optional Mounting Holes for M3 Self-Tapping Screws, Qty. 4 3.66 in.

[9.3 cm]

Desk Mounting The DIN rail slot on the bottom panel enables secure mounting to a horizontal surface. Hardware Required 3/16 in. dia x 5/8 in. long pan head screw 1/2 in. OD x 7/32 in. ID x 3/64 in. thick 3/16 in. dia nut Installing the DIN Rail 1. Slide the DIN rail into the DIN rail slot (7.5 X 35 mm) on the bottom of the QuadCharger. 2. Then, using the appropriate nuts and bolts listed above, secure the DIN rail to the desktop. DIN Rail 17 - 4 Preliminary Draft 8/12/11 Troubleshooting If you encounter problems with your QuadCharger device, refer to chart below for possible solutions. If problems persist, please contact Honeywell Technical Support. Problem Issue The Status LED does not come on when I insert a battery pack. Check the power connections; make sure the Power cable is inserted into the Power supply connector and the battery pack is properly seated. The Status LED lights red during charging. The Status LED flashes red without a battery in the charging slot. Try to charge the battery in one of the other charging slots. If the red Status LED comes on again, then the problem is associated with the battery pack. If the red status stays with the charging slot, the problem is associated with the charging circuitry. If a battery is in failuare mode (flashing red LED), and that battery is removed from the charging slot, the slot does not reset and will continue to flash red. To reset the slot and stop the flashing red LED, insert a known good battery into the slot or recycle the power to the QuadCharger. 17 - 5 Preliminary Draft 8/12/11 17 - 6 18 Preliminary Draft 8/12/11 Customer Support Product Service and Repair Honeywell International Inc. provides service for all its products through service centers throughout the world. To obtain warranty or non-warranty service, contact the appropriate location below to obtain a Return Material Authorization number (RMA #) before returning the product. North America Telephone: (800) 782-4263 E-mail: hsmnaservice@honeywell.com Latin America Telephone: (803) 835-8000 Telephone: (800) 782-4263 Fax: (239) 263-9689 E-mail: laservice@honeywell.com Brazil Telephone: +55 (11) 5185-8222 Fax: +55 (11) 5185-8225 E-mail: brservice@honeywell.com Mexico Telephone: 01-800-HONEYWELL (01-800-466-3993) Fax: +52 (55) 5531-3672 E-mail: mxservice@honeywell.com Europe, Middle East, and Africa Telephone: +31 (0) 40 2901 633 Fax: +31 (0) 40 2901 631 E-mail: euroservice@honeywell.com Hong Kong Telephone: +852-29536436 Fax: +852-2511-3557 E-mail: apservice@honeywell.com Singapore Telephone: +65-6842-7155 Fax: +65-6842-7166 E-mail: apservice@honeywell.com China Telephone: +86 800 828 2803 Fax: +86-512-6762-2560 E-mail: apservice@honeywell.com Japan Telephone: +81-3-6730-7344 Fax: +81-3-6730-7222 E-mail: apservice@honeywell.com Online Product Service and Repair Assistance You can also access product service and repair assistance online at www.honeywellaidc.com. 18 - 1 Preliminary Draft 8/12/11 For ongoing and future product quality improvement initiatives, the 99EX comes equipped with an embedded device lifetime counter function. Honeywell may use lifetime counter data for future statistical reliability analysis as well as ongoing quality, repair and service purposes. Technical Assistance If you need assistance installing or troubleshooting your device, please call your distributor or the near-

est technical support office:

North America/Canada Telephone: (800) 782-4263 E-mail: hsmnasupport@honeywell.com Latin America Telephone: (803) 835-8000 Telephone: (800) 782-4263 E-mail: hsmlasupport@honeywell.com Brazil Telephone: +55 (11) 5185-8222 Fax: +55 (11) 5185-8225 E-mail: brsuporte@honeywell.com Mexico Telephone: 01-800-HONEYWELL (01-800-466-3993) E-mail: soporte.hsm@honeywell.com Europe, Middle East, and Africa Telephone: +31 (0) 40 7999 393 Fax: +31 (0) 40 2425 672 E-mail: hsmeurosupport@honeywell.com Hong Kong Telephone: +852-29536436 Fax: +852-2511-3557 E-mail: aptechsupport@honeywell.com Singapore Telephone: +65-6842-7155 Fax: +65-6842-7166 E-mail: aptechsupport@honeywell.com China Telephone: +86 800 828 2803 Fax: +86-512-6762-2560 E-mail: aptechsupport@honeywell.com Japan Telephone: +81-3-6730-7344 Fax: +81-3-6730-7222 E-mail: aptechsupport@honeywell.com Online Technical Assistance You can also access technical assistance online at www.honeywellaidc.com. 18 - 2 Preliminary Draft 8/12/11 Limited Warranty Honeywell International Inc. ("HII") warrants its products and optional accessories to be free from defects in materials and workmanship and to conform to HIIs published specifications applicable to the products purchased at the time of shipment. This warranty does not cover any HII product which is (i) improperly installed or used; (ii) damaged by accident or negligence, including failure to follow the proper maintenance, service, and cleaning schedule; or (iii) damaged as a result of (A) modification or alteration by the purchaser or other party, (B) excessive voltage or current supplied to or drawn from the interface connections, (C) static electricity or electro-static discharge, (D) operation under conditions beyond the specified operating parameters, or (E) repair or service of the product by anyone other than HII or its authorized representatives. This warranty shall extend from the time of shipment for the duration published by HII for the product at the time of purchase ("Warranty Period"). Any defective product must be returned (at purchasers expense) during the Warranty Period to HII factory or authorized service center for inspection. No product will be accepted by HII without a Return Materials Authorization, which may be obtained by contacting HII. In the event that the product is returned to HII or its authorized service center within the Warranty Period and HII determines to its satisfaction that the product is defective due to defects in materials or workmanship, HII, at its sole option, will either repair or replace the product without charge, except for return shipping to HII. EXCEPT AS MAY BE OTHERWISE PROVIDED BY APPLICABLE LAW, THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER COVENANTS OR WARRANTIES, EITHER EXPRESSED OR IMPLIED, ORAL OR WRITTEN, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. HIIS RESPONSIBILITY AND PURCHASERS EXCLUSIVE REMEDY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT WITH NEW OR REFURBISHED PARTS. IN NO EVENT SHALL HII BE LIABLE FOR INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, AND, IN NO EVENT, SHALL ANY LIABILITY OF HII ARISING IN CONNECTION WITH ANY PRODUCT SOLD HEREUNDER (WHETHER SUCH LIABILITY ARISES FROM A CLAIM BASED ON CONTRACT, WARRANTY, TORT, OR OTHERWISE) EXCEED THE ACTUAL AMOUNT PAID TO HII FOR THE PRODUCT. THESE LIMITATIONS ON LIABILITY SHALL REMAIN IN FULL FORCE AND EFFECT EVEN WHEN HII MAY HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH INJURIES, LOSSES, OR DAMAGES. SOME STATES, PROVINCES, OR COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. All provisions of this Limited Warranty are separate and severable, which means that if any provision is held invalid and unenforceable, such determination shall not affect the validity of enforceability of the other provisions hereof. Use of any peripherals not provided by the manufacturer may result in damage not covered by this warranty. This includes but is not limited to: cables, power supplies, cradles, and docking stations. HII extends these warranties only to the first end-users of the products. These warranties are non-transferable. The limited duration of the warranty for the Dolphin 99EX is as follows:

The duration of the limited warranty for terminals with an integrated imager is one year. The duration of the limited warranty for touch screens is one year. The duration of the limited warranty for the Dolphin 99EX HomeBase device, Dolphin 99EX eBase device, Dolphin 99EX Net Base device, Dolphin 99EX QuadCharger device, Dolphin 99EX Mobile Base, and Dolphin 99EX ChargeBase device, is one year. The duration of the limited warranty for batteries is one year. Use of any battery from a source other than Honeywell may result in damage not covered by the warranty. Batteries returned to Honeywell International Inc. in a reduced state may or not be replaced under this warranty. Battery life will be greatly increased when following the battery instructions in this users guide. 18 - 3 Preliminary Draft 8/12/11 How to Extend Your Warranty Honeywell International Inc. offers a variety of service plans on our hardware products. These agreements offer continued coverage for your equipment after the initial warranty expires. For more information, contact your Sales Representative, Customer Account Representative, or Product Service Marketing Manager from Honeywell International Inc., or your Authorized Reseller. 18 - 4 Preliminary Draft 8/12/11 Preliminary Draft 8/12/11 Honeywell Scanning & Mobility 9680 Old Bailes Road Fort Mill, SC 29707 www.honeywellaidc.com 99EX-UG Rev (b) 8/11

 

 

Draft 8/12/11 Dolphin 99EX/99GX Mobile Computers with Windows Embedded Handheld 6.5 Users Guide Preliminary Draft 8/12/11 Disclaimer Honeywell International Inc. (HII) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII. HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. Web Address: www.honeywellaidc.com Trademarks Dolphin, Dolphin RF, HomeBase, Mobile Base, ChargeBase, Net Base and QuadCharger are trademarks or registered trademarks of Hand Held Products, Inc. or Honeywell International Inc. Microsoft, Windows, Windows Mobile, Windows Phone, Windows Embedded Handheld, Windows CE, Windows 98 Second Edition, Windows NT, Windows 2000, Windows ME, Windows XP, Windows 7, Windows Vista, ActiveSync, Outlook, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation. The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to Honeywell. TORX is a trademark or registered trademark of Textron Inc. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are the property of their respective owners. Patents For patent information, please refer to www.honeywellaidc.com/patents. 2011 Honeywell International Inc. All rights reserved. Preliminary Draft 8/12/11 Table of Contents Chapter 1 - Dolphin 99EX/99GX Terminal Agency Information Laser Safety.........................................................................................................................1-1 Label Locations ..............................................................................................................1-1 Address/Serial Number Label ........................................................................................1-1 Laser Safety Label .........................................................................................................1-1 Laser Safety Statement..................................................................................................1-2 LED Safety...........................................................................................................................1-2 LED Safety Statement....................................................................................................1-2 Infrared LED Safety Statement ......................................................................................1-2 UL and C-UL Statement.......................................................................................................1-2 Approvals by Country...........................................................................................................1-2 R&TTE Compliance Statement802.11a/b/g/n, Bluetooth, and/or GSM............................1-3 Dolphin RF Terminal802.11a/b/g/n, Bluetooth, and/or GSM............................................1-3 Canadian Compliance..........................................................................................................1-4 Conformit la rglementation canadienne ........................................................................1-4 RF Exposure Information (SAR) ..........................................................................................1-4 For European Community Users .........................................................................................1-5 Waste Electrical and Electronic Equipment Information ......................................................1-5 Pacemakers, Hearing Aids and Other Electrically Powered Devices ..................................1-5 Microwaves ..........................................................................................................................1-5 Chapter 2 - Getting Started Out of the Box ......................................................................................................................2-1 Dolphin 99EX/99GX Terminals ............................................................................................2-1 Initial Setup ..........................................................................................................................2-1 Before Initial Use............................................................................................................2-2 Using the Charging/Communication Cables ..................................................................2-3 Replacing the Main Battery Pack.........................................................................................2-4 Home Screen .......................................................................................................................2-5 Title Bar................................................................................................................................2-5 Icons in the Title Bar ............................................................................................................2-5 Horizontal Scroll...................................................................................................................2-8 Tile Bar.................................................................................................................................2-8 Pop-Up Menus .....................................................................................................................2-8 Selecting Programs..............................................................................................................2-8 File Explorer.........................................................................................................................2-9 File Provisioning on the 99EX............................................................................................2-10 Search................................................................................................................................2-10 Resetting the Terminal.......................................................................................................2-11 Soft Reset (Warm Boot) ...............................................................................................2-11 Hard Reset (Cold Boot)................................................................................................2-11 Factory Reset...............................................................................................................2-11 Suspend Mode...................................................................................................................2-11 iii Preliminary Draft 8/12/11 Chapter 3 - Hardware Overview Standard Configurations...................................................................................................... 3-1 Peripherals for the 99EX and 99GX .................................................................................... 3-2 Accessories for the 99EX and 99GX ................................................................................... 3-4 Front Panel: 99EX and 99GX .............................................................................................. 3-5 Front Panel Features for the 99EX and 99GX............................................................... 3-6 Back Panel: 99EX and 99GX .............................................................................................. 3-7 Back Panel Features for the 99EX and 99GX ............................................................... 3-8 Side Panels: 99EX and 99GX ............................................................................................. 3-9 Left Side ........................................................................................................................ 3-9 Right Side ..................................................................................................................... 3-9 Bottom Panel: 99EX and 99GX ......................................................................................... 3-11 I/O Connector .................................................................................................................... 3-11 Using the Touch Panel ...................................................................................................... 3-12 Installing a Screen Protector........................................................................................ 3-12 Healthcare Housing ........................................................................................................... 3-12 Batteries ............................................................................................................................ 3-13 Main Battery Pack........................................................................................................ 3-13 Internal Backup Battery ............................................................................................... 3-15 Managing Battery Power ............................................................................................. 3-15 Checking Battery Power .............................................................................................. 3-16 System Resets .................................................................................................................. 3-16 Installing a Memory Card................................................................................................... 3-18 Installing a SIM Card ......................................................................................................... 3-18 Chapter 4 - Using the Scan Image Engine Overview.............................................................................................................................. 4-1 Laser Safety ........................................................................................................................ 4-1 N5603 Beam Divergence Angle .................................................................................... 4-1 LED Safety .......................................................................................................................... 4-1 Image Engine Specifications ............................................................................................... 4-1 Depth of Field ................................................................................................................ 4-2 Supported Bar Code Symbologies ..................................................................................... 4-3 Decoding ............................................................................................................................. 4-4 To Decode a Bar Code .................................................................................................. 4-4 Aiming Options .............................................................................................................. 4-5 Capturing Images ................................................................................................................ 4-6 Taking an Image............................................................................................................ 4-6 Uploading Images.......................................................................................................... 4-7 Chapter 5 - Using the Color Camera Overview.............................................................................................................................. 5-1 Taking a picture using the Camera Demo tool .................................................................... 5-1 Taking a picture using the Windows Embedded Handheld 6.5 Camera tool ...................... 5-2 Recording Video .................................................................................................................. 5-3 iv Preliminary Draft 8/12/11 Chapter 6 - Using the Keyboards Available Keyboards............................................................................................................ 6-1 Keyboard Combinations ................................................................................................ 6-1 Common Buttons ........................................................................................................... 6-1 Using the Function Keys...................................................................................................... 6-2 Using the Modifier Keys ...................................................................................................... 6-3 Using the Navigation Keys .................................................................................................. 6-3 34-Key Alpha/Numeric Keyboard ........................................................................................ 6-5 ALPHA Key.................................................................................................................... 6-5 34-Key Alpha/Numeric Keyboard Combinations ........................................................... 6-6 34-Key Numeric (Calculator) Keyboard............................................................................... 6-8 ALPHA Key.................................................................................................................... 6-8 34-Key Numeric (Calculator) Keyboard Combinations .................................................. 6-9 43-Key Alpha/Numeric Keyboard ...................................................................................... 6-11 Number Lock (NUM) Key............................................................................................. 6-11 43-Key Keyboard Combinations .................................................................................. 6-12 55-Key Full Alpha/Numeric Keyboard ............................................................................... 6-14 55-Key Keyboard Combinations .................................................................................. 6-15 Chapter 7 - System Settings Overview.............................................................................................................................. 7-1 Clock & Alarms .................................................................................................................... 7-2 Personal Menu .................................................................................................................... 7-3 Buttons........................................................................................................................... 7-3 System Menu....................................................................................................................... 7-7 About ............................................................................................................................. 7-8 Backlight ........................................................................................................................ 7-9 Battery ......................................................................................................................... 7-10 Certificates................................................................................................................... 7-10 Customer Feedback .................................................................................................... 7-10 Encryption.................................................................................................................... 7-11 Error Reporting ............................................................................................................ 7-11 External GPS............................................................................................................... 7-11 Five Volt Control .......................................................................................................... 7-12 Smart Sensor............................................................................................................... 7-12 Managed Programs ..................................................................................................... 7-14 Memory........................................................................................................................ 7-15 RIL ............................................................................................................................... 7-16 Power........................................................................................................................... 7-16 Regional Settings......................................................................................................... 7-16 Remove Programs....................................................................................................... 7-17 Screen ............................................................................................................................... 7-18 Task Manager.................................................................................................................... 7-19 Chapter 8 - Communication Connections Menu............................................................................................................... 8-1 v Draft 8/12/11 Using the IrDA Port.............................................................................................................. 8-2 IrDA Port Location ......................................................................................................... 8-2 Sending Data................................................................................................................. 8-2 Receiving Data .............................................................................................................. 8-3 Connections Manager ......................................................................................................... 8-4 To Access the Connections Manager............................................................................ 8-4 Tasks ............................................................................................................................. 8-4 Advanced....................................................................................................................... 8-5 Dolphin Wireless Manager .................................................................................................. 8-6 Dolphin Wireless Manager Window............................................................................... 8-6 Enabling the Radios....................................................................................................... 8-6 Accessing Radio Configuration Utilities ......................................................................... 8-7 Network Cards..................................................................................................................... 8-8 Connecting and Synchronizing the Terminal and Workstation............................................ 8-8 Installing Additional Software ............................................................................................ 8-10 Adding Programs Using ActiveSync or Windows Mobile Device Center..................... 8-11 Connecting the Terminal to a Wireless Network.......................................................... 8-12 Adding Programs Using the Internet............................................................................ 8-12 Software Upgrades............................................................................................................ 8-13 99EX and 99GX COM Port Assignment Table.................................................................. 8-13 Chapter 9 - Working with Wireless Wide Area Networking (WWAN) Overview.............................................................................................................................. 9-1 Penta Band Antenna...................................................................................................... 9-1 SIM Card Installation ........................................................................................................... 9-3 Installing a SIM Card ........................................................................................................... 9-4 Enabling the WWAN Radio ................................................................................................. 9-5 GSM/HSPA+ Global Radio Dolphin Models ........................................................................ 9-5 Voice Communication.................................................................................................... 9-5 Audio Modes.................................................................................................................. 9-5 Volume Control .............................................................................................................. 9-6 Accessing the Dialer Window ........................................................................................ 9-6 Dialing............................................................................................................................ 9-6 Sending Calls................................................................................................................. 9-7 Ending Calls................................................................................................................... 9-7 Accessing Voice Mail..................................................................................................... 9-7 View Options.................................................................................................................. 9-7 Setup Options...................................................................................................................... 9-7 Data Communication (GSM/HSPA+ Global Radio Dolphin Models) ................................... 9-9 System Requirements ................................................................................................... 9-9 Information Requirements ............................................................................................. 9-9 Establishing Data Communication................................................................................. 9-9 Manual Network Selection ........................................................................................... 9-11 Data Communication GSM/CDMA Dolphin Models .......................................................... 9-13 Gobi Manager .............................................................................................................. 9-13 Establishing Data Communication............................................................................... 9-14 vi Preliminary Draft 8/12/11 Chapter 10 - Working with the Bluetooth Radio Enabling the Bluetooth Radio ............................................................................................ 10-1 Pairing and Trusted Devices ............................................................................................. 10-2 Connecting to Other Bluetooth Devices ............................................................................ 10-2 Transferring Files............................................................................................................... 10-5 Making the Terminal Discoverable .................................................................................... 10-6 Selecting COM Ports ......................................................................................................... 10-6 Chapter 11 - Working with GPS Overview............................................................................................................................ 11-1 Assisted GPS Support....................................................................................................... 11-1 Powering the GPS Module ................................................................................................ 11-1 Communication Ports ........................................................................................................ 11-1 Selecting the Port ........................................................................................................ 11-1 COM7 .......................................................................................................................... 11-1 GPS Intermediate Driver.............................................................................................. 11-2 GPS Demo ........................................................................................................................ 11-2 Chapter 12 - Dolphin 99EX HomeBase Device (Model 99EX-HB) Overview............................................................................................................................ 12-1 Unpacking the HomeBase ........................................................................................... 12-1 Parts and Functions........................................................................................................... 12-2 Bottom Panel ............................................................................................................... 12-5 Power ................................................................................................................................ 12-5 Connecting Power to the HomeBase........................................................................... 12-5 Charging the Main Battery................................................................................................. 12-6 To Power a Terminal and Charge its Main Battery...................................................... 12-6 Charging a Spare Battery in the Auxiliary Battery Well ............................................... 12-6 Communication.................................................................................................................. 12-7 Connecting the Communication Cables ...................................................................... 12-7 Establishing Communication ....................................................................................... 12-7 Communicating with the Dolphin Terminal .................................................................. 12-7 Verifying Data Transfer................................................................................................ 12-8 RS232 Communications Cables........................................................................................ 12-8 RS232 Pin Configuration ............................................................................................. 12-8 Serial Connector................................................................................................................ 12-9 Mounting the HomeBase ................................................................................................... 12-9 Desk Mounting............................................................................................................. 12-9 Chapter 13 - Dolphin 99EX eBase Device (Model 99EX-EHB) Overview............................................................................................................................ 13-1 Unpacking the eBase................................................................................................... 13-1 Parts and Functions........................................................................................................... 13-2 Front Panel .................................................................................................................. 13-2 Back Panel .................................................................................................................. 13-4 Bottom Panel ............................................................................................................... 13-5 vii Preliminary Draft 8/12/11 Power ................................................................................................................................ 13-5 Connecting Power to the eBase .................................................................................. 13-5 Charging the Main Battery................................................................................................. 13-6 To Power a Terminal and Charge its Main Battery...................................................... 13-6 Charging a Spare Battery in the Auxiliary Battery Well ............................................... 13-6 Communication.................................................................................................................. 13-6 Software Requirements ............................................................................................... 13-6 Establishing Ethernet Communication......................................................................... 13-7 Establishing USB Communication ............................................................................... 13-7 Mounting the eBase........................................................................................................... 13-8 Desk Mounting............................................................................................................. 13-8 Chapter 14 - Dolphin 99EX Mobile Base Device (Model 99EX-MB) Overview............................................................................................................................ 14-1 Front Panel ........................................................................................................................ 14-2 Bottom Panel ..................................................................................................................... 14-3 Back Panel and Mounting Brackets................................................................................... 14-4 Mounting............................................................................................................................ 14-5 Safety Precautions....................................................................................................... 14-5 Installation.................................................................................................................... 14-5 Powering the Dolphin Terminal ......................................................................................... 14-6 Charging the Dolphin Terminal.......................................................................................... 14-6 Establishing Communication ............................................................................................. 14-6 Connecting the Communication Cables ...................................................................... 14-6 Establishing ActiveSync or Windows Mobile Device Center Communication ............. 14-7 RS232 Communication Cables ......................................................................................... 14-7 Serial Connector .......................................................................................................... 14-8 Chapter 15 - Dolphin 99EX ChargeBase Device (Model 99EX-CB) Overview............................................................................................................................ 15-1 Unpacking the ChargeBase......................................................................................... 15-1 Parts and Functions........................................................................................................... 15-2 Front Panel .................................................................................................................. 15-2 Back Panel................................................................................................................... 15-3 Power ................................................................................................................................ 15-3 Connecting Power to the ChargeBase ............................................................................. 15-3 Charging the Main Battery................................................................................................. 15-4 To Power a Terminal and Charge its Main Battery...................................................... 15-4 Mounting the ChargeBase................................................................................................. 15-4 Channel Bracket Installation (Pre-existing Hardware Installations)................................... 15-8 Chapter 16 - Dolphin 99EX Net Base Device (Model 99EX-NB) Overview............................................................................................................................ 16-1 Parts and Functions........................................................................................................... 16-2 Front Panel .................................................................................................................. 16-2 Back Panel .................................................................................................................. 16-3 Bottom Panel ............................................................................................................... 16-4 viii Preliminary Draft 8/12/11 Power ................................................................................................................................ 16-4 Connecting Power to the Net Base.............................................................................. 16-4 Charging the Main Battery................................................................................................. 16-5 To Power a Terminal and Charge its Main Battery...................................................... 16-5 Communication.................................................................................................................. 16-5 Software Requirements ............................................................................................... 16-5 Connecting the Dolphin Terminal to the Net Base ............................................................ 16-5 Mounting the Net Base ...................................................................................................... 16-6 Channel Bracket Installation (Pre-existing Hardware Installations)................................. 16-10 Chapter 17 - Dolphin 99EX QuadCharger Device (Model 99EX-QC) Overview............................................................................................................................ 17-1 Parts and Functions........................................................................................................... 17-2 Supplying Power................................................................................................................ 17-3 Inserting and Charging Batteries ....................................................................................... 17-3 Mounting the QuadCharger ............................................................................................... 17-4 Troubleshooting................................................................................................................. 17-5 Chapter 18 - Customer Support Product Service and Repair............................................................................................... 18-1 Online Product Service and Repair Assistance ........................................................... 18-1 Technical Assistance......................................................................................................... 18-2 Online Technical Assistance........................................................................................ 18-2 Limited Warranty ............................................................................................................... 18-3 How to Extend Your Warranty ..................................................................................... 18-4 ix Preliminary Draft 8/12/11 x 1 Preliminary Draft 8/12/11 Dolphin 99EX/99GX Terminal Agency Information Dolphin 99EX and 99GX mobile computers meet or exceed the requirements of all applicable standards organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe operation is to operate them according to the agency guidelines that follow. Read these guidelines carefully before using your Dolphin terminal. This documentation is relevant for the following Dolphin models: 99EXL0, 99EXLW, 99EXLG, 99GXL0, 99GXLG. Laser Safety Label Locations Dolphin 99EX with WLAN Dolphin 99EX with WWAN Dolphin 99GX Compliance Label Compliance Label, Optional Compliance Label, Optional Compliance Label Compliance Label Address/Serial Number Label The Address/Serial Number Label is located in the battery well of the terminal. Laser Safety Label If the following label is attached to your product, it indicates the product contains an engine with a laser aimer:

Image Engines with Integrated Laser Aimers 1 - 1 Preliminary Draft 8/12/11 Laser Safety Statement This device has been tested in accordance with and complies with IEC60825-1(Ed. 2.0), EN60825-

1:2007. Complies with 21 CFR 1040.10 and 1040.11, except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. LASER LIGHT, DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT, 1.0 mW MAX OUTPUT: 650nm, pulse duration of 15.5msec.

Warning - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. LED Safety LED Safety Statement LEDs have been tested and classified as EXEMPT RISK GROUP to the Standard: IEC 62471:2006. Infrared LED Safety Statement Caution! Do not view directly with optical instruments. UL and C-UL Statement UL and C-UL listed: UL60950-1 2nd Edition, and CSA C22.2 No. 60950-1-07 2nd Edition. Approvals by Country EMC, Radio, & SAR Safety FCC Part 15, Subpart B FCC Part 15, Subpart C, 15.247 FCC Part 15, Subpart E FCC Part 22H FCC Part 24E FCC SAR OET 65 Supplement C ICES-003 (Class B) RSS 132 RSS 133 RSS 210 EN300328, EN301893, EN55022, EN55024, EN301489-1, EN301489-7/24, EN301489-17, 3GPPTS 51.010-1, EN301511, EN301908, EN50360, EN50361, EN50371, EN50392, IEC6220-1, IEC6220-2, EN300440, 301 389-25

(CDMA 2000) UL60950-1 2nd Edition CSA C22.2 No. 60950-1-07, 2nd Edition EN60950-1 2nd Edition EN60825-1 2nd Edition IEC 60950-1 2nd Edition IEC 60825-1 2nd Edition IEC 62471 Country U.S.A. Canada European Community/CE International 1 - 2 Preliminary Draft 8/12/11 R&TTE Compliance Statement802.11a/b/g/n, Bluetooth, and/or GSM Dolphin RF terminals are in conformity with all essential requirements of the R&TTE Directive (1999/5/

EC). in accordance with the Class II product requirements specified This product is marked with in the R&TTE Directive. In addition, this product complies to 2006/95/EC Low Voltage Directive when supplied with the recommended power supply. Honeywell shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive. The equipment is intended for use throughout the European Community; PAN European Frequency Range: 2.4022.480 GHz. Restrictions for use in France are as follows:

Outdoor use: Maximum power (EIRP*) of 100 mW for the 2.4002.454 GHz band & maximum power Indoor use: Maximum power (EIRP*) of 100 mW for the entire 2.4002.4835 GHz

(EIRP*) of 10 mW for the 2.4542.483 MGHz band. 5Ghz band: UNII (Unlicensed National Information Infrastructure) or band1 (5.150 to 5.250 GHz) is restricted to indoor use only. Any other use will make the operation of the device illegal. For further information, please contact:

Honeywell Imaging & Mobility Europe BV Nijverheidsweg 9 5627 BT Eindhoven The Netherlands FCC Requirements Dolphin RF Terminal802.11a/b/g/n, Bluetooth, and/or GSM This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. In accordance with FCC 15.21, changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Increase the separation between the equipment and receiver. 1 - 3 Preliminary Draft 8/12/11 If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the following booklet helpful: Something About Interference. This is available at FCC local regional offices. Our company is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by our company. The correction is the responsibility of the user. Use only shielded data cables with this system. Canadian Compliance This Class B digital apparatus complies with Canadian ICES-003 and RSS210. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Conformit la rglementation canadienne Cet appareil numrique de la Classe B est conforme la norme NMB-003 et RSS210 du Canada. Son fonctionnement est assujetti aux conditions suivantes:

1. Cet appareil ne doit pas causer de brouillage prjudiciable. 2. Cet appareil doit pouvoir accepter tout brouillage reu, y compris le brouillage pouvant causer un fonctionnement indsirable. RF Exposure Information (SAR) This mobile phone meets the government's requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The highest SAR value for the model phone as reported to the FCC when tested for use at the ear is 0.919 W/kg Max. and when worn on the body, as described in this user guide, is 1.34 W/kg Max. (Body-

worn measurements differ among phone models, depending upon available accessories and FCC requirements.) While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. 1 - 4 Preliminary Draft 8/12/11 The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: HD599EXLG, HD599EXLW and __________________. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you do no t use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of 1.5 cm from your body when the phone is switched on. For European Community Users Honeywell complies with Directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE). European REACH Regulation 1907/2006 of 1 June, 2007, and Restriction of Hazardous Substances Directive (RoHS) 2002/95/EC of 1 July 2006. Waste Electrical and Electronic Equipment Information This product has required the extraction and use of natural resources for its production. It may contain hazardous substances that could impact health and the environment, if not properly disposed. In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems for product disposal. Those systems will reuse or recycle most of the materials of the product you are disposing in a sound way. The crossed out wheeled bin symbol informs you that the product should not be disposed of along with municipal waste and invites you to use the appropriate separate take-back systems for product disposal. If you need more information on the collection, reuse, and recycling systems, please contact your local or regional waste administration. You may also contact your supplier for more information on the environmental performances of this product. Pacemakers, Hearing Aids and Other Electrically Powered Devices Most manufacturers of medical devices adhere to the IEC 601-1-2 standard. This standard requires devices to operate properly in an EM Field with a strength of 3V/m over a frequency range of 26 to 1000MHz. The maximum allowable field strength emitted by the Dolphin terminal is 0.3V/m according to Subpart B of Part 1 of the FCC rules. Therefore, the RF from the Dolphin terminal has no effect on medical devices that meet the IEC specification. Microwaves The radio in the Dolphin RF terminal operates on the same frequency band as a microwave oven. Therefore, if you use a microwave within range of the Dolphin RF terminal you may notice performance degradation in your wireless network. However, both your microwave and your wireless network will continue to function. 1 - 5 Preliminary Draft 8/12/11 1 - 6 2 Preliminary Draft 8/12/11 Getting Started Out of the Box Verify that the carton contains the following items:

Dolphin mobile computer (the terminal) Main battery pack Quick Start Guide If you ordered accessories for your terminals, verify that they are also included with the order. Be sure to keep the original packaging in the event that the Dolphin terminal should need to be returned for service. For details, see Product Service and Repair on page 18-1. Dolphin 99EX/99GX Terminals Dolphin 99EX and 99GX model terminals are designed for use with standard battery pack model 99EX-

BTSC (Li-poly 3.7V, 11.3 watt hour) and extended battery pack model 99EX-BTEC (Li-ion 3.7V, 18.5 watt hour) manufactured for Honeywell International Inc.

Dolphin 99EX and 99GX model terminals are not designed for use in hazardous locations. Note: Before installing the main battery pack, read the Guidelines for Battery Pack Use and Disposalon page 3-14. Initial Setup Step 1. Install the Main Battery Pack The terminal is shipped with the battery packaged separate from the unit. Follow the steps below to install the main battery. For information on how to remove the battery, see Replacing the Main Battery Pack on page 2-4.

Ensure all components are dry prior to placing the battery in the terminal. Mating wet components may cause damage not covered by the warranty. 1. Release the hook securing the hand strap to the back panel of the terminal near the speaker (99EX models only). 2. Remove the battery door by lifting up the latches near the base of the battery door. 3. Insert the battery into the battery well. 2 3 2 - 1 Preliminary Draft 8/12/11 4. Replace the battery door. Apply pressure to engage the door latch. Note:The battery door must be installed prior to powering the unit. 5. Reattach the hand strap (99EX models only). Battery Error Notification If your terminal displays the following indicators, replace the main battery pack with a Honeywell new Honeywell battery pack. For information on how to remove the main battery pack from the terminal, see Replacing the Main Battery Pack on page 2-4. appears in the Title bar at the top of the touch screen The General Notification LED flashes red A Notification appears on the Tile bar at the bottom of the touch screen Step 2. Charge the Main and Backup Batteries The power supply for Dolphin terminals consists of two types of battery power: the main battery pack that is accessible from the back panel, and the backup battery that resides inside the terminal. The main battery powers the terminal. The internal backup battery charges off the main battery and maintains the application data stored in RAM memory for up to 30 minutes when the terminals main bat-

tery pack is completely discharged or removed. Before Initial Use Terminals are shipped with both batteries discharged of all power. The initial charging time for the main battery pack is 4 hours for the standard 3.7V battery or 6 hours for the extended 3.7V battery. Connect the terminal to one of the 99EX series charging peripherals to charge; see Peripherals for the 99EX and 99GX on page 3-2. Honeywell recommends charging the Dolphin terminal for at least 24 hours prior to initial use to ensure the internal backup battery is fully charged. Dolphin 99EX and 99GX terminals are designed for use with the following 99EX charging devices and cables: 99EX-HB, 99EX-EHB, 99EX-NB, 99EX-CB, 99EX-DEX, 99EX-RS232, 99EX-USB, and 99EXUSBH. See Chapters 12-17 for additional information on the individual device requirements.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty. Warning! Dolphin 99EX charging peripherals are not designed for use in hazardous locations. 2 - 2 Preliminary Draft 8/12/11 Using the Charging/Communication Cables Use only UL Listed power supply, which has been qualified by Honeywell with output rated at 5VDC and 3 amps with the device.

Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet compo-

nents may cause damage not covered by the warranty. Plug Adapter Power Cable COMM Cable Dolphin 99EX Cable Cup Host Device Dolphin 99EX Plug Adapter Power Cable Charging Cup Client Device USB Connector Or RS232 Connector Or RS232, DEX A/V Connector Step 3. Boot the Terminal The terminal begins booting as soon as power is applied. Do NOT press any keys or interrupt the boot process. When the boot process is complete, the Home screen appears, and the terminal is ready for use. Step 4. Set the Time Zone, Time, and Date On the Home screen, tap the line that displays the time and date. When the Clock & Alarms screen appears, tap the arrow to the right of the time zone to open the drop down menu. Select the appropiate time zone from the menu. Set the correct time and date in the remaining fields and tap OK to save. 2 - 3 Preliminary Draft 8/12/11 Replacing the Main Battery Pack Note: Before replacing the main battery pack, read the Guidelines for Battery Pack Use and Disposalon page 3-14.

Ensure all components are dry prior to placing the battery in the terminal. Mating wet components may cause damage not covered by the warranty. 1. Press the Power key to put the terminal in Suspend Mode (see page 2-11). 2. Release the hook securing the hand strap to the back panel of the terminal near the speaker. 3. Remove the battery door by lifting up the latches near the base of the battery door. 4. Wait at least 3 seconds, and then remove the battery. This process allows the device to shut down properly and maintains memory during the battery swap. 5. Insert the new battery into the battery well. 6. Replace the battery door. Apply pressure to engage the door latch. The battery door must be installed prior to powering the unit. 7. Reattach the hand strap.

We recommend use of Honeywell Li-poly or Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet compo-

nents may cause damage not covered by the warranty. 2 - 4 Preliminary Draft 8/12/11 Home Screen After the Dolphin terminal initializes the first time, you see the Home screen. Tap to reach the Start screen from the home screen. Tap to access the Dolphin Wireless Manager (see page 8-6) from the home screen. Title Bar The Title bar, located at the top of the screen, displays the active program, the status of various system functions, and the current time. Tapping on the title bar provides access to the Horizontal Scroll. The scroll provides access to additional programs and application screens. For additional information, see Horizontal Scroll on page 2-8. Text here indicates the active program. Icons in the Title Bar Indicator Meaning Synchronizing data Icons here indicate the status of various system functions. The terminal could not synchronize data with the workstation via ActiveSync. New e-mail 2 - 5 Preliminary Draft 8/12/11 Icons in the Title Bar Indicator Meaning New text message New voicemail New instant message Vibrate on Ringer off Speakerphone on Voice call in progress Calls are forwarded Call on hold Missed call Data call in progress A battery error has occurred. Replace the main battery pack with a Honeywell Li-poly or Li-ion battery pack. Battery is has a full charge Battery has a high charge Battery has a medium charge Battery has a low charge Battery has a very low charge and requires charging Terminal is running on external power. If a battery pack is installed, the battery is charging in the background. The terminal is not connected to external power. A battery is installed, but is defective; specifically, its charge level cannot be measured. No SIM card is installed Active network connection 2 - 6 Preliminary Draft 8/12/11 Icons in the Title Bar Indicator Meaning No active network connection GPRS available GPRS connecting GPRS in use HSDPA available HSDPA connecting HSDPA in use EDGE available EDGE connecting EDGE in use UMTS available UMTS connecting UMTS in use Radio is off The radio is not connected to a network. The radio is connected. The bars indicate the signal strength. No radio signal The terminal is searching for a signal. Wi-Fi is on, but device is not connected Wi-Fi data call Pending alarm Bluetooth 2 - 7 Preliminary Draft 8/12/11 Horizontal Scroll The Horizontal Scroll, located at the top of most application windows, provides access to additional application screens. You can flick left or right on the scroll or tap each label on the scroll, until you get to the desired screen. Tapping a label to the left or right of the center item brings new labels into view. Note: Tap the Title bar to access the horizontal scroll if it is not visible on the screen. The content of the Horizontal scroll changes according to the open application. Tile Bar The Tile bar is located at the bottom of application windows. The Task tray displays icons for programs running in the background. The icons change according to the open application. The Tile bar displays icons you use to open and close screens, menues, and features. Pop-Up Menus With pop-up menus, you can quickly choose an action for a selected item. To access a pop-up menu, tap and hold the stylus on the item name of the action you want to perform. When the menu appears, lift the stylus, and tap the action you want to perform. Tap anywhere outside the menu to close the menu without performing an action. Selecting Programs To see the programs loaded on your terminal, tap program, tap once on the program icon. To reposition an icon on the Start Menu, tap and hold the stylus on the icon, then drag the icon to the desired position. to access the Start Menu. To open a 2 - 8 Preliminary Draft 8/12/11 File Explorer You can also use the File Explorer to find files and organize these files into folders. 1. Tap

> File Explorer

. 2. Tap the Up button at the bottom of the screen to move up one level in the directory. 3. You can move files in File Explorer by tapping and holding on the item you want to move, then tapping Cut or Copy on popup menu. 4. Navigate to the folder you want to move the file to, then tap and hold a blank area of the window. 5. Tap Paste on the pop-up menu. Note: If there is no blank space available in the window, tap Menu on the command bar, navigate to the end of the menu using the down arrow, then tap Edit > Paste. 2 - 9 Preliminary Draft 8/12/11 File Provisioning on the 99EX

\IPSM\Honeywell The IPSM folder is the only partition on the 99EX that persists across a kernel upgrade (*.UPG file exten-

sion). During a kernel upgrade, files are automatically copied from the \IPSM\Honeywell\Autoin-

stall folder and then installed in the \Honeywell (root file system) folder as part of the upgrade process.

\IPSM\Honeywell\AutoInstall The files in the IPSM\Honeywell\AutoInstall folder are only installed when a factory reset or ker-

nel upgrade occurs. Once the files are installed, they persist through hard and soft resets. If a file is added to the folder and a hard or soft reset is performed, it will have no effect. If a program is manually removed using the Remove Programs application (see page 7-17), then the program is not automatically re-installed on a hard or soft reset.

\Honeywell The Honeywell partition or root file system partition is persistent over a Hard Reset, Soft Reset, and the removal of the battery pack or the removal of AC power. However, during a kernel upgrade the root file system is reformatted so all data in the folder is deleted and replaced by any files in the \IPSM\Honey-

well\AutoInstall folder as part of the upgrade process.

To prevent data loss, back up all user data to an SD card or external memory device before perform-

ing an upgrade.

\Honeywell\AutoInstall If you run a CAB file from within the \Honeywell\AutoInstall (user store) folder, after the program has been installed, the CAB file will be deleted from the User Store. The program remains installed through all successive Hard and Soft resets. If you want the program to be part of the Autoinstall that occurs after a factory reset or software upgrade, paste the program file(s) in both the \IPSM\Honeywell\Autoinstall folder and the

\Honeywell\Autoinstall. Contact a Honeywell technical support representative for information on how to perform a factory reset. For contact information, see Customer Support on page 18-1. or go to www.honeywellaidc.com.

To prevent data loss, back up all user data to an SD card or external memory device before perform-

ing an upgrade. Contact a Honeywell technical support representative for information on available software upgrades for your Dolphin terminal, see Customer Support on page 18-1. or go to www.honeywellaidc.com. Search The Search feature helps you quickly locate information. Tap Enter the text you want to find, select a data type, and then tap Go to start the search. Select Larger than 64 KB in the Type drop-down field to quickly find information that is taking up storage space.

> Search Phone

. 2 - 10 Preliminary Draft 8/12/11 Resetting the Terminal There are three types of system resets: a soft reset, a hard reset, or a factory reset. The soft and hard resets preserve all data stored in the file system. Contact a Honeywell technical support representative for more information on how to perform a factory reset. Soft Reset (Warm Boot) A soft reset re-boots the device and preserves any objects created in RAM. You would perform a soft reset when:

after installing some software applications. after making changes to certain system settings, such as network cards. the terminal fails to respond. 1. Press and hold the CTRL ALT CTRL ENT

+ ENTER keys for approximately 5 seconds. 2. The decode and scan LEDs flash for approximately three seconds as the terminal resets. 3. When the reset is complete, the Home screen displays. Hard Reset (Cold Boot) A hard reset re-boots the device and closes any open applications running in RAM at the time of the reset. 1. Press and hold the CTRL ALT CTRL

+ ESC ESC keys for approximately 5 seconds. 2. The decode and scan LEDs light for approximately 3 seconds. 3. The terminal re-initializes. Factory Reset Contact a Honeywell technical support representative for information on how to perform a factory reset. For contact information, see Technical Assistance on page 18-2. Suspend Mode The terminal goes into Suspend Mode automatically when the terminal is inactive for a programmed period of time. You can program this time on the Advance tab of the Power System Setting; see Power on page 7-16. To put the terminal into Suspend Mode manually, press the Power key and the screen turns off. To wake the terminal from Suspend Mode, press the Power key or SCAN key SCAN

. Note: You should always put the terminal in suspend mode before removing the battery door. For information on removing the battery, see Replacing the Main Battery Pack on page 2-4. 2 - 11 Preliminary Draft 8/12/11 2 - 12 3 Preliminary Draft 8/12/11 Hardware Overview Standard Configurations WLAN & WPAN

(99EX and 99GX Models) WLAN, WPAN & Camera

(99EX Models Only) Microsoft Windows Embedded Handheld 6.5 Classic OMAP3715 (1Ghz) 256MB RAM X 1GB Flash Four keyboard options 3.7V Li-poly standard battery pack or optional extended 3.7V Li-ion rechargeable battery pack Adaptus Imaging Technology: N5603ER/

SR/HD or N5600ER/SR/HD image engines 802.11a/b/g/n and Bluetooth Microsoft Windows Embedded Handheld 6.5 Classic OMAP3715 (1Ghz) 256MB RAM X 1GB Flash Four keyboard options 3.7V Li-poly standard battery pack or extended 3.7V Li-ion rechargeable battery pack Adaptus Imaging Technology: N5603ER/

SR/HD or N5600ER/SR/HD image engines 802.11a/b/g/n and Bluetooth 3.1 megapixel auto control color camera WLAN, WPAN, with GPS

(99EX Models Only) WLAN, WPAN, with GPS & Camera

(99EX Models Only) Microsoft Windows Embedded Handheld 6.5 Classic OMAP3715 (1Ghz) 256MB RAM X 1GB Flash Four keyboard options 3.7V Li-poly standard battery pack or extended 3.7V Li-ion rechargeable battery pack Adaptus Imaging Technology: N5603ER/

SR/HD or N5600ER/SR/HD image engines 802.11a/b/g/n and Bluetooth GPS Microsoft Windows Embedded Handheld 6.5 Classic OMAP3715 (1Ghz) 256MB RAM X 1GB Flash Four keyboard options 3.7V Li-poly standard battery pack or extended 3.7V Li-ion rechargeable battery pack Adaptus Imaging Technology: N5603ER/

SR/HD or N5600ER/SR/HD image engines 802.11a/b/g/n and Bluetooth GPS 3.1 megapixel auto control color camera WLAN, WPAN, & WWAN

(99EX Models Only) WLAN, WPAN, & WWAN with GPS

(99EX Models Only) Microsoft Windows Embedded Handheld 6.5 Professional Microsoft Windows Embedded Handheld 6.5 Professional OMAP3715 (1Ghz) 256MB RAM X 1GB Flash Four keyboard options Extended 3.7V Li-ion rechargeable battery pack OMAP3715 (1Ghz) 256MB RAM X 1GB Flash Four keyboard options 3.7V Li-poly or extended 3.7V Li-ion rechargeable battery pack Adaptus Imaging Technology: N5603ER/

SR/HD or N5600ER/SR/HD image engines Adaptus Imaging Technology: N5603ER/

SR/HD or N5600ER/SR/HD image engines 802.11a/b/g/n, Bluetooth, and GSM/

HSPA+

802.11a/b/g/n, Bluetooth, and GSM/

HSPA+

GPS 3 - 1 Preliminary Draft 8/12/11 WLAN, WPAN, WWAN with GPS & Camera

(99EX Models Only) WLAN, WPAN, & WWAN

(99EX Models Only) Microsoft Windows Embedded Handheld 6.5 Classic OMAP3715 (1Ghz) 256MB RAM X 1GB Flash Four keyboard options 3.7V Li-poly or extended 3.7V Li-ion rechargeable battery pack Adaptus Imaging Technology: N5603ER/

SR/HD or N5600ER/SR/HD image engines 802.11a/b/g/n, Bluetooth, and GSM/

HSPA+

GPS 3.1 megapixel auto control color camera Microsoft Windows Embedded Handheld 6.5 Classic OMAP3715 (1Ghz) 256MB RAM X 1GB Flash Four keyboard options 3.7V Li-poly or extended 3.7V Li-ion rechargeable battery pack Adaptus Imaging Technology: N5603ER/

SR/HD or N5600ER/SR/HD image engines 802.11a/b/g/n, Bluetooth, and GSM/CDMA WLAN, WPAN, & WWAN with GPS

(99EX Models Only) WLAN, WPAN, WWAN with GPS & Camera

(99EX Models Only) Microsoft Windows Embedded Handheld 6.5 Classic OMAP3715 (1Ghz) 256MB RAM X 1GB Flash Four keyboard options 3.7V Li-poly or extended 3.7V Li-ion rechargeable battery pack Adaptus Imaging Technology: N5603ER/

SR/HD or N5600ER/SR/HD image engines 802.11a/b/g/n, Bluetooth, and GSM/CDMA GPS Microsoft Windows Embedded Handheld 6.5 Classic OMAP3715 (1Ghz) 256MB RAM X 1GB Flash Four keyboard options 3.7V Li-poly or extended 3.7V Li-ion rechargeable battery pack Adaptus Imaging Technology: N5603ER/

SR/HD or N5600ER/SR/HD image engines 802.11a/b/g/n, Bluetooth, and GSM/

HSPA+ or GSM/CDMA GPS 3.1 megapixel auto control color camera Some configurations of the 99EX are available with an external housing made of plastic that is specifi-

cally designed for the healthcare industry. For more information, see Healthcare Housing on page 3-12. Peripherals for the 99EX and 99GX Each of the following items is sold separately to enhance the capabilities of your Dolphin terminal. Dolphin 99GX terminals are compatible with 99EX peripherals. Dolphin HomeBase Device The Dolphin HomeBase device is a charging and communication cradle supporting both RS232 and USB communications, which enables the terminal to interface with the majority of PC-based enterprise systems. The USB host port is Hi-Speed 2.0v compliant. This device also contains an auxiliary battery well that charges a spare Honeywell Li-poly or extended Li-ion battery. For more information, see Dolphin 99EX HomeBase Device (Model 99EX-HB) on page 12-1. 3 - 2 Preliminary Draft 8/12/11 Dolphin Mobile Base Device The Dolphin Mobile Base device is a charging and communication cradle designed specifically for in-

premise and in-transit data collection applications. It features a flexible mounting bracket and a cigarette lighter adapter to adapt it to your environment. The serial connector supports RS232 communication and power out to peripheral devices, such as handheld scanners. The USB port is client Hi-Speed 2.0v compliant. You can connect the base to a peripheral device, such as a memory stick or to a printer using a standard USB cable. For more information, see Dolphin 99EX Mobile Base Device (Model 99EX-MB) on page 14-1. Dolphin eBase Device The Dolphin Ethernet (eBase) device enables a single 99EX mobile computer to communicate with a host device over an Ethernet network. In addition, the ebase is equipped with a USB host port that is Hi-

Speed 2.0v compliant, which enables the terminal to interface with the majority of PC-based enterprise systems. This device also contains an auxiliary battery well that charges a spare Honeywell Li-poly or extended Li-ion battery. For more information, see Dolphin 99EX eBase Device (Model 99EX-EHB) on page 13-1. Dolphin Net Base Device The Dolphin Net Base device enables up to four 99EX mobile computers to communicate with a host device over an Ethernet network. In addition, the Net Base provides a second RJ45 Ethernet port for connection to an additional device such as a printer, workstation, eBase, or another Net Base. For more information, see Dolphin 99EX Net Base Device (Model 99EX-NB) on page 16-1. Dolphin ChargeBase The Dolphin ChargeBase is a 4-slot charging cradle that holds, powers, and charges terminals. For more information, see Dolphin 99EX ChargeBase Device (Model 99EX-CB) on page 15-1. Dolphin QuadCharger Device The Dolphin QuadCharger device is a 4-slot charging station for 99EX standard Li-poly or extended Li-

ion battery packs. For more information, see Dolphin 99EX QuadCharger Device (Model 99EX-QC) on page 17-1. 3 - 3 Draft 8/12/11 Accessories for the 99EX and 99GX Each of the following items is sold separately to enhance the capabilities of your Dolphin terminal. Note: When using accessories where the terminal is worn on the body, the terminals touch panel must face away from the body. Dolphin Mobile Charger The Dolphin Mobile Charger is a charging cable that connects the terminal directly to a 12 Volt DC power source, such as a cigarette lighter port inside a vehicle, eliminating the need for a cradle. Intelligent bat-

tery technology on-board the terminal ensures proper charging. The Dolphin 99EX Mobile Charger is an ideal low-cost charging solution for in-transit mobile applications. Dolphin Mobile Mount The Dolphin Mobile Mount, which holds a Dolphin terminal securely in place inside a vehicle, is an ideal, low-cost alternative to the Dolphin Mobile Base when communications is not required. When used in conjunction with the Dolphin Mobile Charger, the Dolphin Mobile Mount creates a complete mounting and charging solution for in-transit applications. The entire kit includes an adjustable vehicle mounting bracket. Communication/Charging Cables Dolphin communication/charging cable kits are an all-in-one solution for mobile applications. Each cable kit powers the terminal, charges its main battery, and communicates with host or peripheral devices with-

out the need for a cradle. Cable kits can support RS232, USB client, and USB host communications. U.K. or European power cords are available. Storage Holster Holsters provide convenient storage for terminals in mobile environments. The holsters feature a front pocket that holds an extra battery, a side loop to hold an extra stylus, and a belt loop to secure the holster to a belt. The standard holster includes two additional stylus loops on the front of the holster. Protective Enclosure Protective enclosures help seal and protect terminals from damage while providing full access to all ter-

minal parts and features. These enclosures feature a swivel clip on the back that enables you to secure the enclosure to a belt. Enclosures also come with an adjustable shoulder strap for added convenience. Stylus Kits Each Dolphin is shipped with a stylus and a stylus tether used to secure the stylus to the terminal to pre-

vent loss. Kits containing three styli and three tethers are available for purchase. When ordering specify your Dolphin model number to ensure the correct stylus selection. Stylus for Dolphin 99EX with WLAN Stylus for Dolphin 99EX with WWAN and 99GX Models 3 - 4 Preliminary Draft 8/12/11 Battery Pack The rechargable battery pack provides the main power for the terminal. For more information, see Batteries on page 3-13. Front Panel: 99EX and 99GX Note: Your Dolphin model may differ from the models illustrated; however, the features noted are standard for all 99EX and 99GX models unless otherwise noted. Charge Indicator LED General Notification LED Front Speaker Charge Indicator LED Touch Panel Display SCAN Key Navigation Keys Recessed Keyboard Power Key Red Modifier Key Blue Modifier Key Microphone I/O Connector Note: The illustrations above show the 55-Key Full Alpha/Numberic Keyboard option. For a complete overview of the optional keyboards available for the 99EX/99GX, see Using the Keyboards on page 6-1. For a description of each callout, see Front Panel Features for the 99EX and 99GX (see page 6). 3 - 5 Preliminary Draft 8/12/11 Front Panel Features for the 99EX and 99GX Blue Modifier Key See Using the Modifier Keys on page 6-3. Front Speaker The front speaker is the receiver for handset voice calls. See GSM/HSPA+ Global Radio Dolphin Models on page 9-5. General Notification LED The light emitting diode (LED) located above the top right corner of the LCD display flashes and illuminates during resets, scanning/imaging, and taking a picture. This LED can be programmed by various software applications. Charge Indicator LED The light emitting diode (LED) located above the top left corner of the LCD display illuminates when the Power Tools BattMon application is enabled and the device is on AC charge. For more information, consult the Dolphin Power Tools Users Guide for Windows Embedded Handheld 6.5. Microphone The integrated microphone that provides audio input for handset and speakerphone voice calls. See Voice Communication on page 9-5. Navigation Keys The centrally located navigation keys enable you to move and position the cursor through software programs. The up and down arrows are programmed to perform specific functions when pressed in combination with the Blue and Red modifier keys. For more details, see Using the Navigation Keys on page 6-3. Power Key The power key Mode or wakes the terminal from Suspend Mode. See Suspend Mode on page 2-11. located at the lower left corner of the keypad puts the terminal in Suspend Recessed Keyboard There are three keyboard options: a 34-key alpha/numeric keyboard, a 43-key alpha/numeric keyboard or a 55-key full alpha/numberic keyboard. For a complete overview of each keyboard, see Using the Keyboards on page 6-1 Red Modifier Key See Using the Modifier Keys on page 6-3. SCAN Key The SCAN key is centrally located for easy access with the right or left hand. When pressed, the SCAN key activates the scanner/imager. The SCAN key also functions as a system wake-

up control for the terminal. 3 - 6 Preliminary Draft 8/12/11 Touch Panel Display The color 3.7 inch liquid crystal display (LCD) touch panel is covered with an industrial, protective lens for greater durability. The video graphic array (VGA) display resolution is 480 X 640. The color LCD (16 bit RGB) uses thin film transistor (TFT) technology. The touch panel backlight illuminates when the screen is touched, but not when the Backlight key is pressed. For more information, see Backlight on page 7-9. The touch panel can be activated by the stylus (included with the terminal) or a finger. For more information, see Using the Touch Panel on page 3-12. Back Panel: 99EX and 99GX Note: Your Dolphin model may differ from the models illustrated; however, the features noted are standard for all 99EX and 99GX models unless otherwise noted. Image/Scan Engine Window Image/Scan Engine Window Scan Rear Speaker Fastener for the Stylus Tether Color Camera

(99EX Only) Flashlight/

Camera Flash

(99EX Only) Hand Strap Hook

(99EX Only) Hand Strap

(99EX Only) Fastener for the Stylus Tether Rear Speaker Battery Door Scan Trigger

(99GX Only) Handle

(99GX Only) Battery Door Battery Door Release Battery Door Release For a description of each callout, see Back Panel Features for the 99EX and 99GX below. 3 - 7 Draft 8/12/11 Back Panel Features for the 99EX and 99GX Battery Door The battery door secures the Li-ion or Li-poly battery pack in the terminals battery well. For information on how to remove the battery, see Replacing the Main Battery Pack on page 2-4. Color Camera (99EX Only) The 3.1-Megapixels Resolution color camera provides easy picture capture with Automated Camera Control (ACC). Additional features include automated picture profiles and an Application Programming Interface (API). Fastener for the Stylus Tether The Stylus Tether helps prevent accidental loss when the stylus is not stored in the stylus slot. A stylus tether is a coiled, elastic cord that tethers the stylus to the terminal. Secure one end of the cord to the back panel of the terminal and the other end to the stylus. Flashlight/Camera Flash (99EX Only) The flashlight/camera flash is located on the back panel of the terminal. When used as a Flashlight, press the Blue key +

key to turn the flashlight on or off. When used as a Camera Flash with the terminals color camera, the flash is controlled by the camera application. Hand Strap (99EX Only) The 99EX comes with a removable, elastic hand strap. Image/Scan Engine Window The available image engines read and decode linear, stacked linear (e.g., PDF417), and 2D matrix bar code symbologies. The available image engines contain a laser aimer for greater accuracy. The laser apertures for the imaging engines laser aimers are contained behind this window. For more details, see Using the Scan Image Engine on page 4-1. Memory Card Socket and SIM Card Socket The memory card socket provides the user with the option to expand the terminals memory capacity using industry-standard microSD or microSDHC memory interfaces. The expansion socket is located under the main battery in the battery well. The card socket for the Subscriber Identity Module (SIM) is also located under the main battery in the battery well. See SIM Card Installation and SIM Card Requirements, on page 9-3 for additional information. When the protective SIM/memory card door, battery pack, and the battery door are properly installed, the memory card is sealed against moisture and particle intrusion, read/write data is stored securely, and the terminals environmental rating is preserved; see Installing a Memory Card on page 3-18. Rear Speaker The integrated rear speaker sounds audio signals as you scan bar code labels and enter data. The integrated speaker also supports playback of wave and MP3 files, software mixer, and Speakerphone for WWAN/GSM audio. The operating frequency range is 600-3000Hz at

>90dB. 3 - 8 Preliminary Draft 8/12/11 Scan Trigger (99GX Only) The back panel of the 99GX contains an integrated, handle for a more ergonomic grip in scan-

intensive applications. Press the scan trigger to activate the imager/scanner. Stylus Slot The stylus is used to operate the touch panel. The back panel of the terminal features a storage slot to hold the stylus when not in use. The stylus features a special tip for added accuracy and ease of use. Side Panels: 99EX and 99GX The left and the right side panels of the Dolphin contain different features. Note: Your Dolphin model may differ from the models illustrated; however, the features noted are standard for all 99EX and 99GX models unless otherwise noted. Left Side Left Button IrDA Port Extended Li-ion Battery Door Standard Li-poly Battery Door Left Button By default, the Left Button triggers the scanner/imager. You can reassign the button to launch applications or execute commands. For additional information, see Changing Button Assignments on page 7-4. IrDA Port The IrDA port enables infrared communication. The maximum data transfer speed is 115 kbps. For more information about using this port, see Using the IrDA Port on page 8-2. Note: The infrared LED aperture is located behind the IrDA Port window. Right Side Right Button Volume Control Button Lower Volume | Raise Volume Standard Li-poly Battery Door Extended Li-ion Battery Door 3 - 9 Preliminary Draft 8/12/11 Handle (99GX Only) Lanyard Strap (99GX Only) Rear Speaker Scan Trigger (99GX Only) Handle (99GX Only) The handle is integrated into the back panel of the terminal and is ergonomically designed to be comfortable through repetitive scans. Right Button By default, the Right Button triggers the scanner/imager. You can reassign the button to launch applications or execute commands. For additional information, see Changing Button Assignments on page 7-4. Scan Trigger (99GX Only) Press the scan trigger to activate the imager/scanner. Volume Control Button Press the top or bottom of the volume button to raise or lower the volume of the active speaker. Lanyard Strap (99GX Only) The 99GX comes with a removable lanyard strap that attaches to the bottom of the handle. 3 - 10 Preliminary Draft 8/12/11 Bottom Panel: 99EX and 99GX Pin Description 2 4 6 8 10 12 14 16 18 1 3 5 7 9 11 13 15 17 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 GND GND USBC_DET USBC_D-

RTS USBC_D+

DTR SPK Audio_GND MIC CTS USBH_D-

5V_OUT USBH_D-

TXD RXD VCC VCC Note: Signals referenced are for a DTE device. I/O Connector The I/O connector powers the terminal, charges the main battery, and facilitates communication. All Dol-

phin peripherals are designed to work exclusively with this connector. The I/O connector supports RS232 and high speed USB v2.0 communication. For RS232, the maxi-

mum communication speed is 115.2 Kbps with seven baud rate settings. For USB, the communication speed is up to 480 Mbps. I/O Power Out The I/O connector also provides power out (to peripheral devices) +5V at 500mA. This means that, with the proper cable, the terminal can power another device. By default, power out is disabled, but the 5V output may be enabled, see Five Volt Control on page 7-12. 3 - 11 Preliminary Draft 8/12/11 Using the Touch Panel Honeywell defines proper use of the terminal touch panel as using a screen protector and proper stylus. Screen protectors maintain the ongoing integrity (i.e., prevent scratching) of the touch panel, which is why their use is recommended for applications that require a high to medium level of interface with the touch panel, such as signature capture for proof of delivery. Honeywell advocates the use of screen protectors on all Dolphin devices. We recommend implementing a screen protector replacement program to ensure that screen protectors are replaced periodically when signs of damage/wear are noticeable. For general use, we recommend replacing the screen protector every thirty (30) days. However, replacement cycles vary according to the average level of touch panel use in your application. Replacement screen protectors can be purchased directly from Honeywell. Please contact a Honeywell sales associate for details. Honeywell also mandates use of a proper stylus, which is one that has a stylus tip radius of no less than 0.8 mm. Use of the Honeywell stylus included with the terminal is recommended at all times. Honeywell warranty policy covers wear on the touch panel for the first twelve (12) months if a screen pro-

tector is applied and an approved stylus is used for the 12 month duration covered by the warranty. Installing a Screen Protector Dolphin terminals ship with a screen protector already installed. You will need to replace the screen pro-

tector at regular intervals. 1. After the current screen protector has been removed from the touch panel, clean the touch panel thoroughly with a clean, non-abrasive, lint-free cloth. Make sure there is no debris on the touch panel. 2. Align the exposed section of the protector with the bottom edge of the touch panel. Make sure that the screen protector is flush with each side of the touch panel. To reposition, lift up gently and reapply. 3. Press the screen protector firmly and carefully across the surface of the touch panel as you peel away the backing. 4. If necessary, smooth out any air pockets or bumps. Healthcare Housing Some configurations of the 99EX terminal are available with an external plastic housing that is designed to resist the effects of harsh chemicals in a healthcare environment. The plastic is crystalline in nature, which helps prevent chemicals from seeping through the housing. Important! The following cleaning solutions have been tested to assure safe cleaning of your terminals disinfectant-ready housing. They are the only solutions approved for use with these terminals. Damage caused by the use of cleaners other than those listed below may not be covered by the warranty. Sani-Cloth HB wipes Sani-Cloth Plus wipes Sani-Cloth Bleach wipes Super Sani-Cloth wipes 3 - 12 Preliminary Draft 8/12/11 Isopropyl Alcohol wipes (70%) CaviWipes Virex 256 409 Glass and Surface Cleaner Windex Blue Gentle dish soap and water Batteries There are three types of battery power: the main battery pack installed in the back panel, the backup battery located inside the terminal and the Real Time Clock (RTC) battery located inside the terminal. They are designed to work together to prevent data loss when the terminal is in use over long periods. All batteries must be completely charged before using a Dolphin terminal for the first time!

Note: The RTC battery will preserve the Real Time Clock 60 days after the main battery and internal backup battery are fully depleted. Main Battery Pack

The standard 3.7 V, 11.3 watt hour Li-poly or extended 3.7 V, 18.5 watt hour Li-ion battery pack is the pri-

mary power source for the terminal. We recommend use of Honeywell Li-ion or Li-poly battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. Charging Options When the main battery pack is installed in the terminal, use one of the following peripherals:

Dolphin 99EX HomeBase Device (Model 99EX-HB) (see page 12-1) Dolphin 99EX eBase Device (Model 99EX-EHB) (see page 13-1) Dolphin 99EX Mobile Base Device (Model 99EX-MB) (see page 14-1) Dolphin 99EX ChargeBase Device (Model 99EX-CB) (see page 15-1) Dolphin 99EX Net Base Device (Model 99EX-NB) (see page 16-1) When the main battery pack is not installed in the terminal:

Place the battery pack in the Dolphin 99EX QuadCharger Device (Model 99EX-QC) (see page 17-1) Place the battery pack in the Auxiliary Battery Well of the Dolphin 99EX HomeBase Device (Model 99EX-HB) (see page 12-2) or Dolphin 99EX eBase Device (Model 99EX-EHB) (see page 13-1). For information on how to remove the main battery pack from the terminal, see Replacing the Main Battery Pack on page 2-4. Charging Time The standard 3.7V Li-poly battery pack requires 4 hours to charge completely before initial use. The extended 3.7V Li-ion battery pack requires 6 hours to charge completely before initial use. Honeywell recommends charging the Dolphin terminal for at least 24 hours prior to initial use to ensure the internal backup battery is fully charged. 3 - 13 Draft 8/12/11 Battery Error Notification If your terminal displays the following indicators, replace the main battery pack with a Honeywell Li-poly or Li-ion battery pack. For information on how to remove the main battery pack from the terminal, see Replacing the Main Battery Pack on page 2-4. appears in the Title bar at the top of the touch screen. The General Notification LED flashes red. A Notification appears on the Tile bar at the bottom of the touch screen. Storing Batteries To maintain top performance from batteries, avoid storing batteries outside of the following temperature ranges:

14F to 113F (-10C to +45C) for short term storage of less than one month 32F to 86F (-0C to +30C) for long term storage Do not store batteries in extremely high humidity. For prolonged storage, do not keep batteries stored in a charger that is connected to a power source. Guidelines for Battery Pack Use and Disposal The following are general guidelines for the safe use and disposal of batteries:

Do not disassemble or open crush, bend or deform, puncture or shred. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard. Improper battery use may result in a fire, explosion or other hazard. We recommend use of Honeywell Li-ion or Li-poly battery packs. Use of any non-Honeywell battery may pose a personal hazard to the user. Only use the battery for the system for which it is specified. Do not use a battery in any other manner outside its intended use in Dolphin terminals and peripherals. Only use the battery with a charging system that has been qualified with the system per standard IEEE-

Std-1725-2006. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard. Replace the battery only with another battery that has been qualified with the system per this standard, IEEE-Std-1725-2006. Use of an unqualified battery may present a risk of fire, explosion, leakage or other hazard. Replace defective batteries immediately; using a defective battery could damage the Dolphin terminal. Never throw a used battery in the trash. Promptly dispose of used batteries in accordance with local regulations. Do not short-circuit a battery or throw it into a fire; it can explode and cause severe personal injury. Do not allow metallic conductive objects to contact battery terminals. If you observe that the Honeywell battery supplied is physically damaged, please send it to Honeywell International Inc. or an authorized service center for inspection, see Product Service and Repair on page 18-1. Avoid dropping the terminal or battery. If the terminal or battery is dropped, especially on a hard surface, and the user suspects damage, send it to a Honeywell International Inc. or an authorized service center for inspection, see Product Service and Repair on page 18-1. If you are not sure the battery or charger is working properly, send it to Honeywell International Inc. or an authorized service center for inspection. Excessive discharge can degrade battery performance. Recharge the battery when your terminal indicates low battery power. 3 - 14 Preliminary Draft 8/12/11 Although your battery can be recharged many times, the battery life is limited. Replace it after the battery is unable to hold an adequate charge. Internal Backup Battery Located inside the terminal is a 3.6 Volt nickel metal hydride (NiMH) backup battery. The backup battery prevents the terminal from being reset if you need to replace the main battery pack. It retains RAM data during the battery pack exchange. A fully charged backup battery provides 30 minutes of backup time. Note: When removing a battery from the terminal, put the device in Suspend Mode (see page 2-11) before removing the battery door. Once the battery door is removed, wait at least 3 seconds before removing the main battery. This process allows the device to shut down properly and maintains memory during the battery swap. If at any time the backup battery becomes fully discharged of power (e.g., the terminal is left without the main battery pack for more than 30 minutes), the terminal resets when power is supplied. All files are retained, but you may need to restart any running applications. In addition, a fully discharged backup battery requires a minimum of 24 hours of charging time to reach a full charge. Note: Data and programs stored in Flash memory are not lost even if the internal backup battery fails. Charging The internal backup battery and the RTC battery are powered by the main battery pack. Therefore, charging the internal batteries requires a charged main battery pack be installed in the terminal and the terminal be connected to a charging device. The internal backup battery must be fully charged before using the terminal for the first time. Honeywell recommends charging the Dolphin terminal for at least 24 hours prior to initial use to ensure the internal backup battery is fully charged. After that, if the internal backup battery becomes fully discharged of power, it requires a minimum of 24 hours of charging time to function normally. Guidelines for Use Follow these guidelines to maximize the life of the internal backup battery:

Keep a charged Li-ion or Li-poly battery pack in the terminal; the backup battery prematurely discharges if there is not at least a partially charged battery in the terminal. Keep the terminal connected to power when the terminal is not in use. Managing Battery Power Letting the backup battery become fully discharged causes the terminal to lose all data in RAM. Honey-

well recommends, you keep a charged battery pack in the terminal at all times to help prevent data loss. The internal battery discharges prematurely if there is not at least a partially charged battery in the termi-

nal. When you remove a battery pack, insert another charged battery pack in the terminal immediately. Default Critical and Low Battery Points When the terminal is running on battery power (as opposed to external power), warnings are displayed when the battery reaches critical and low battery points. The warning points are determined by the fol-

lowing registry entry:

[HKEY_LOCAL_MACHINE\ControlPanel\Power]

3 - 15 Preliminary Draft 8/12/11 There are two DWORD values in this registry entry: MedState and LowState. The default values for these entries are as follows:

MedState=25%

This sets the Low Battery point to 25%. When the battery hits the percentage charge specified here, the user is notified. LowState=10%

This sets the Critical Battery point to 10%. When the battery hits the percentage charge specified here, the user is notified. Note: Warnings do not appear when the terminal is on external power. Setting Critical and Low Battery Points Developers can reset the battery parameters in the registry from 0 (no warning) to 99 (would nearly always warn). You can review and set these battery points in the RegEdit Power Tool. 1. Tap

> Power Tools > RegEdit. 2. Drill down to HKEY_LOCAL_MACHINE > ControlPanel > Power. 3. Tap the Value Name to change the Value Data. You can reset the Value Data from 0 (no warning) to 99 (would nearly always warn). 4. Tap OK to save changes. For more information about the RegEdit Power Tool, refer to the Dolphin Power Tools Users Guide avail-

able for download at www.honeywellaidc.com. Checking Battery Power 1. Tap

> Settings > System 2. Tap Power to view the power status of the main battery and backup battery. Note: The Backup Battery gauge registers either 0% or 100%. The percentage is not an indication of the level of charge remaining on the backup battery. An installed and functional battery registers 100%. A total discharge or a battery error registers 0%. Or Tap Battery to view detailed information on the installed battery pack. For additonal information on Power, see page 7-16. For additional information on Advanced Power Settings, see page 7-16. For additional information on the Battery Log Configuration, see page 7-10. System Resets See Resetting the Terminal on page 2-11. 3 - 16 Preliminary Draft 8/12/11 Hardware Maintenance When needed, clean the image engine window and the LCD display with a clean, non-abrasive, lint-free cloth. The terminal can be cleaned with a damp cloth. For additional information on hardware mainte-

nance specific to the Dolphin Healthcare Housings, see page 3-12. 3 - 17 Draft 8/12/11 Installing a Memory Card 1. Press the Power key to put the terminal in Suspend Mode. 2. Release the hand strap hook near the speaker on the back panel of the terminal. 3. Remove the battery door. 4. Wait at least 3 seconds, and then remove the battery. 5. Remove the T6 TORX screw securing the protective door closed. 6. Lift up the lower left corner of the door to access the memory socket. 7. Unlock the access door to the memory socket by sliding the door toward the IrDA port side of the terminal. 8. Lift the door up to expose the socket. 9. Slide the microSD or microSDHC card into the door of the socket. Note: Make sure the interface on the memory card is connected to the interface in the socket; align the notch on the card with the notch of the socket. 10. Close and lock the access door. 11. Close the protective door over the memory socket. Install and tighten the T6 screw to secure the door closed. 12. Install the battery and the battery door. Reattach the hand strap to the terminal. 13. Press the Power key or SCAN key to wake the terminal. Installing a SIM Card See Installing a SIM Card on page 9-4. 3 - 18 Step 5 Step 6 Step 7 Step 8 Step 9 Step 10 4 Preliminary Draft 8/12/11 Using the Scan Image Engine Overview The Dolphin terminal houses a compact image engine that instantly reads popular 1D and 2D bar codes and supports omni-directional aiming and decoding for greater flexibility in real-world settings. The image engine can also capture black and white digital images, such as signatures and pictures of dam-

aged inventory. With the latest CMOS-based technology, the engine works like a digital camera and enables black and white digital image capture, signature capture, and reading of OCR characters. Angled Imaging All imagers are installed at a 25 degree downward-facing angle for enhanced comfort and maneuverabil-

ity while scanning. Laser Safety See Laser Safety on page 1-1. N5603 Beam Divergence Angle Engines Horizontal Beam Divergence Angle

(degrees) Vertical Beam Divergence Angle

(degrees) N5603SR/HD 18.1 N5603ER 13.1 LED Safety See LED Safety on page 1-2. Image Engine Specifications 14.3 9.9 Engines 1D N5603SR/ER/HD Y 2D Y Image Capture Aiming Pattern Omni-Directional Aiming Y N5603 Red High-Vis Aiming Pattern (page 4-5) Y N5600SR/ER/HD Y Y Y See Laser Safety on page 1-1. N5600 Green Aiming Beam (page 4-5) Y 4 - 1 Preliminary Draft 8/12/11 Depth of Field The depth of field measurements used the following parameters:

Distances are measured from the front of the engine.

+23C (+73F), 0 lux Photographic quality codes N5603/N5600 High Density (HD) N5603/N5600 Standard Range (SR) N5603/N5600 Extended Range (ER) Distance (in/cm) Delta

(in/cm) Distance (in/cm) Distance (in/cm) Near

Far

Near 2.0

(5.1) 1.4

(3.6) 1.4

(3.6) 1.4

(3.6) 1.3

(3.3) 2.3

(5.8) 1.9

(4.8) 1.4

(3.6) 1.4

(3.6) 1.7

(4.3) 1.8

(4.6) 1.9

(4.8) 1.7

(4.3) 2.1

(5.3) Far 3.4

(8.6) 4.8

(12.2) 5.6

(14.2) 5.5

(14.0) 7.8

(19.8) 9.2

(23.4) 7.1

(18) 4.8

(12.2) 4.8

(12.2) 6.2

(15.7) 3.4

(8.6) 3.1

(7.9) 5.3

(13.5) 7.8

(19.8) 1.4

(3.6) 3.4

(8.6) 4.2

(10.7) 4.1

(10.4) 6.5

(16.5) 6.9

(17.5) 5.2

(13.2) 3.4

(8.6) 3.4

(8.6) 4.5

(11.4) 1.6

(4.1) 1.2

(3.0) 3.6

(9.1) 5.7

(14.5) 2.7

(6.9) 2.5

(6.4) 1.6

(4.1) 1.8

(4.6) 2.2

(5.6) 1.8

(4.6) 2.6

(6.6) 2.0

(5.1) 1.5

(3.8)

2.2

(5.6) 2.0

(5.1) Delta

(in/cm)

3.6

(9.1) 6.7

(17) 11.6

(29.5) 17.2

(43.7) 17.9

(45.5) 14.7

(37.3) 2.6

(6.6) 4.5

(11.4) 9.5

(24.1)

Near

5.4

(13.7) 4.2

(10.7) 3.1

(7.9) 2.4

(6.1) 2.9

(7.4) 2.7

(6.9) 6.1

(15.5) 4.7

(11.9) 2.4

(6.1)

6.3

(16.0) 9.2

(23.4) 13.2

(33.5) 19.0

(48.3) 20.1

(51.1) 16.5

(41.9) 5.2

(13.2) 6.5

(16.5) 11.0

(27.9)

7.9

(20.1) 15.3

(38.9) 5.7

(14.5) 13.3

(33.8) 5.1

(13.0) 3.6

(9.1) Far

9.0

(22.9) 12.6

(32.0) 17.2

(43.7) 20.9

(53.1) 24.0

(61.0) 19

(43.3) 7.4

(18.8) 9.8

(24.9) 15.0

(38.1)

10.5

(26.7) 18

(45.7) Delta

(in/cm)

3.6

(9.1) 8.4

(21.3) 14.1

(35.8) 18.5

(47.0) 21.1

(53.6) 16.3

(41.4) 1.3

(3.3) 5.1

(13.0) 12.6

(32.0)

5.4

(13.7) 14.4

(36.6) Focus Symbology 3 mil C39/128 5 mil C39/128 7.5 mil C39/128 10 mil C39/128 15 mil C39/128 20 mil C39/128 100% UPC 5 mil PDF417 6.7 mil PDF417 10 mil PDF417 5 mil MicroPDF 5 mil Data Matrix 10 mil Data Matrix/Aztec 20 mil Data Matrix 4 - 2 Preliminary Draft 8/12/11 10 mil QR 20 mil QR 32 mil Maxicode 3.3

(8.4) 2.2

(5.6) 2.4

(6.1) 5.0

(12.7) 7.9

(20.1) 8.6

(21.8) 1.7

(4.3) 5.7

(14.5) 6.2

(15.7) 2.2

(5.6) 2.2

(5.6) 2.5

(6.4) 7.1

(18.0) 15.5

(39.4) 17.0

(43.2) 4.9

(12.4) 13.3

(33.8) 14.5

(36.8) 4.3

(10.9) 2.4

(6.1) 3.9

(9.9) 10.6

(26.9) 19.6

(49.8) 23.2

(58.9) 6.5

(16.5) 17.6

(44.7) 19.5

(49.5) ISBT 128 Matrix 2 of 5 MSI Plessey Straight 2 of 5 IATA Straight 2 of 5 Industrial Telepen Trioptic Code UPC with Add On UPC-A UPC-E GS1 Databar MaxiCode Micro PDF PDF417 QR Code Supported Bar Code Symbologies Symbology Type Symbology Name 1D Symbologies Codabar Codablock F Code 3 of 9 Code 11 Code 32 Pharmaceutical (PARAF) Code 93 Code 128 EAN with Add-On EAN with Extended Coupon Code EAN-8 EAN-13 GS1-128 GS1 Databar Interleaved 2 or 5 2D Symbologies Aztec Codablock A Codablock F Data Matrix Composite Codes UPC/EAN UCC/EAN GS1 Databar OCR Postal Codes OCR US Money Font MICR (E 13 B) and SEMI Font OCR-A OCR-B Postnet and most international 4-state codes Australian Post British Post Canadian Post China Post Japanese Post KIX (Netherlands) Post Korea Post Planet Code 4 - 3 Preliminary Draft 8/12/11 Decoding The terminal supports two types of image decoding for use in various bar code reading and imaging applications: full-area imaging and Advanced Linear Decoding (ALD). Full-Area Imaging Full-area imaging provides omni-directional reading of linear and non-linear 1D and 2D bar codes, OCR, signature capture, and picture taking. When reading all bar code types using full-area imaging, a positive read can be obtained from many positions; see Aiming Options on page 4-5. To achieve the best read, the aiming beam should be centered horizontally across the bar code. ALD ALD provides fast reading of linear and stacked linear bar codes. To achieve a positive read when read-

ing linear 1D and PDF417 bar codes, the green aiming beam should be centered horizontally across the bar code. When ALD is enabled, the reader does not read matrix or postal codes. To Decode a Bar Code The aiming beam should be oriented in line with the bar code to achieve optimal decoding. A range of 4-10 inches (10-25 cm) from the bar code is recommended. 1. Tap

> Demos

> Scan Demo

. 2. Point the Dolphin terminal at the bar code. 99EX Models 99GX Models 3. Project the aiming beam or pattern by pressing and holding one of the following:

the trigger (99GX models only), the SCAN key (all models) or one of the terminals side buttons (all models). 4. The scan LED lights red. 5. Center the aiming beam over the bar code; see Aiming Options on page 4-5. 6. When the bar code is successfully decoded, the decode LED lights green and the terminal beeps. 7. The bar code information is entered into the application in use. 4 - 4 Preliminary Draft 8/12/11 Aiming Options The aiming beams are smaller when the terminal is held closer to the code and larger when it is farther from the code. Symbologies with smaller bars or elements (mil size) should be read closer to the unit whereas symbologies with larger bars or elements (mil size) should be read farther from the unit. N5603 Red High-Vis Aiming Pattern If your Dolphin terminal is configured with a 5603 imager, high-vis aimers frame the bar code for more intuitive aiming. See Laser Safety on page 1-1. N5600 Green Aiming Beam Linear Bar Code 2D Matrix Symbol 4 - 5 Preliminary Draft 8/12/11 Capturing Images The image-capture process is an intuitive, split-second operation for experienced users. By following the basic guidelines, new users can easily develop their own technique and, with practice, quickly learn to adapt it to different application environments. Image Preview When the imaging process is initiated, the touch screen displays a preview of the object. This is a live video image of what the imager is currently viewing. The live video image has a slightly degraded appearance compared to the captured image. This is normal. Scan Key On all 99EX terminals, the SCAN key captures images. File Formats File formats supported for image storage include Bitmap (BMP), JPEG (JPG) and Portable Network Graphics (PNG). The default file format for images is a grayscale JPG. Compression Digital images have a maximum image size of 640 x 480 pixels and may have up to a 256 grayscale image definition. The image quality and related file size are determined by the data compression method used by the soft-

ware application used to take images. The average size of the image file is approximately 48K. How-

ever, the size of the image depends on the content of the image - the more complex the content, the larger the file size. Taking an Image The following steps are basic guidelines for taking images:

1. Tap

> Demos > Imaging Demo

. 2. Point the Dolphin terminal at the object. 99EX Models 99GX Models 3. To preview the image, press and hold one of the following:

the trigger (99GX models only), the SCAN key (all models) or one of the terminals side buttons (all models). 4 - 6 Preliminary Draft 8/12/11 4. The touch screen displays a preview of the object, and the decode and scan LEDs light red. 5. Adjust the terminals position until the object appears on the screen the way you want it to appear in the image. 6. Hold the terminal still and release the SCAN key, trigger or side button. The scan and decode LEDs flash red, the screen flashes, and the captured image appears on the screen. 7. Unless otherwise specified by the application in use, the image is saved to the \My Device\My Documents folder. Enabling the Aimer You can enable the aiming pattern for imaging in the Imaging Demo. For details about the aimer, see Aiming Options on page 4-5. 1. Tap

> Demos > Imaging Demo > Setup menu > Aimer. 2. The aiming pattern is now enabled for imaging. Uploading Images Image files can be uploaded to a host workstation via Microsoft ActiveSync and a Dolphin communica-

tion peripheral or your wireless radio connection. Note: You can download the most current version of ActiveSync from www.microsoft.com. Note: Visit the Microsoft Windows 7 website for information on how to sync your music, pictures, contacts and calendars using Device Stage. Note: Visit the Microsoft Windows Vista website for information on how to sync your music, pictures, contacts and calendars using Windows Mobile Device Center.

We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell peripherals, cables, or power adapters may cause damage not covered by the warranty. 4 - 7 Preliminary Draft 8/12/11 4 - 8 5 Preliminary Draft 8/12/11 Using the Color Camera Overview Dolphin 99EX terminals equipped with a 3.1-Megapixels Resolution color camera with Automated Cam-

era Control (ACC), and an Application Programming Interface (API) provide easy integration of color pic-

ture and video capture into business applications. The camera lens and camera flash are located on the back panel of the terminal. Note: The following feature is not supported in Dolphin 99GX models. Taking a picture using the Camera Demo tool 1. Tap

> Demos

> Camera Demo

. 2. Adjust the camera settings using the icon menu at the top of the display screen. 3. Point the terminal's camera lens at the object you want to capture. The camera lens is located on the back panel of the terminal. Camera Lens 4. Center the object in the touch screen display. Flashlight/

Camera Flash 5. Press the ENT key ENT or tap Snap

. The terminals red LED illuminates during picture capture. Note: Tap the green arrow to review or edit your pictures. Tap the green box screen. to exit the picture review/edit 5 - 1 Preliminary Draft 8/12/11 Options Tap Options > Camera. The Camera Options menu appears. There are five tabs of configurable options accessible from the Camera Options menu. Profile Tab Display Tab The profile tab allows you to customize your camera settings, or chose from several predefined profiles designed to provide the best picture quality for common tasks. Capture Tab Caption Tab File Tab Taking a picture using the Windows Embedded Handheld 6.5 Camera tool 1. Tap

> Pictures & Videos > Camera 2. Point the terminal's camera lens at the object you want to capture. The camera lens is located on the back panel of the terminal. 3. Center the object in the touch screen display. 4. Press the ENT key ENT

. 5. The touch screen displays the captured photo. 5 - 2 Preliminary Draft 8/12/11 Menu Tap Menu on the Command Bar to adjust the camera settings, switch to video mode, and access addi-

tional camera options. Item Video Mode Descriptions Activate Video Mode Set Mode (i.e., Normal, Burst, or Timer) Resolution Set Picture Resolution (i.e., QVGA, VGA, SVGA, XGA, UXGA, or QXGA) Zoom Flash Focus Brightness Full Screen Options Set Zoom (i.e., x1, x2, or x3) Set Camera Flash On or Camera Flash Off Set Focus Off, Focus On, Focus on Trigger, or Fixed-Focus Set the brightness setting from +2.0 EV to -2.0 EV in .5 EV increments Switch to full screen mode Set Camera Options, Video Options, Slide Show Options or General Options Options Tap Menu > Options. The Options menu contains four screens:

General Tab Slide Show Tab Camera Tab Video Tab Recording Video 1. Tap

> Pictures & Videos > Camera > Menu > Video 2. Point the terminal's camera lens at the object you want to capture. 3. Press the ENT key ENT to start recording. 4. Tap Stop or press ENT to stop recording. 5 - 3 Preliminary Draft 8/12/11 5 - 4 6 Preliminary Draft 8/12/11 Using the Keyboards Available Keyboards There are four keyboard options in the 99EX series:

34-Key Alpha/Numeric Keyboard 34-Key Numeric

(Calculator) Keyboard 43-Key Alpha/Numeric Keyboard 55-Key Full Alpha/

Numeric Keyboard SEND ESC END SCAN SEND ESC END SCAN TAB 1 4 GHI 7 PQRS

F1 F5 SFT VOL PG 2 ABC 5 8 0

F2 F6 JKL T U V

F3 F7

BKSP

SP

ALT CTRL ENT DEF MNO WXYZ 3 6 9

F4 F8

DEL ALPHA TAB 7 4 GHI 1 PQRS

F1 F5 SFT VOL PG 8 5 2 ABC JKL T U V ENT DEF MNO WXYZ 9 6 3 0

F2 F6 SP

ALT CTRL

F3 F7

BKSP

F4 F8

DEL ALPHA SEND ESC END SCAN TAB VOL PG ENT A B

F1 1 F2 C 2 F3 F G H 4 F7 5 F8 F6 D 3 F4 I 6 F9 K

F11 L M N 7 F12 8 F13 9 F14 P Q R

. F17 0 F18 F16 S

, F19 U F21 V W X F22 F23 F24 SFT SP BKSP ALT CTRL E F5 J F10 O F15 T F20 Y F25 Z NUM ESC TAB SP BKSP DEL SFT A F K P U

F1

F6

F11

F16 F21 SCAN VOL PG

2 5 8 0 D C H I N M R S W X

F3

F8 F13 F18 F23 1 4 7

. B G L Q V

F2

F7 F12

F17 F22 ALT CTRL All Keyboards Contain the Following:

Backlit for easy viewing in various lighting conditions. Centrally located Scan key for both right- and left-hand operation. Color-coding so you can clearly see the most common keyboard combinations. Function, navigation, and modifier keys. Keyboard Combinations See 34-Key Alpha/Numeric Keyboard Combinations on page 6-6. See 34-Key Numeric (Calculator) Keyboard Combinations on page 6-9. See 43-Key Keyboard Combinations on page 6-12. See 55-Key Keyboard Combinations on page 6-15. Common Buttons See Using the Function Keys on page 6-2. See Using the Modifier Keys on page 6-3. See Using the Navigation Keys on page 6-3. ENT 3 6 9

, E J O T Y

F5 F10

F15 F20 F25 Z

) F4

F9

F14 F19 F24 6 - 1 Preliminary Draft 8/12/11 Using the Function Keys Key

Blue

:BKSP 34-Key BKSP 43-Key BKSP 55-Key 34-Key 55-Key DEL DEL ENT ESC Name Backlight Flashlight Backspace

(BKSP) Delete

(DEL) Enter (ENT) Escape

(ESC) Power Key Function Turns the keyboard backlight on and off. Turns the flashlight on and off. The flashlight is located on the back panel of the terminal. Note: The flashlight function is disabled on all 99GX models. Moves the cursor back one space each time the key is pressed. If you are typing text, it deletes the previous character each time it is pressed. Deletes the next character each time the key is pressed. This key only appears on the 34-key and 55-key kepad options. Confirms data entry. Cancels the current action. Puts the terminal in and wakes the terminal from Suspend Mode; see Suspend Mode on page 2-11. SCAN Key SCAN Activates the scan and wakes the terminal from Sleep Mode. Its position allows convenient one-handed image-taking and/or bar code decoding. Moves the cursor one space. Moves the cursor to the next tab stop or the next control (on a form). 34-Key 43-Key 55-Key

;SP SP SP TAB Space (SP) Tab 6 - 2 Preliminary Draft 8/12/11 Using the Modifier Keys Name ALPHA Blue and Red Number Lock (NUM) Shift (SFT) Key Function ALPHA 34-Key The ALPHA key enables you to toggle between the alpha and numeric modes. See ALPHA Key on page 6-5. Blue Red The blue and red keys are used in combination with other keys to type special characters and perform system functions. Each key modifies only the next key pressed. Each keyboard is color-coded to indicate the character typed or function performed when specific keys are pressed immediately after the blue or red modifier key. NUM 43-Key The Number Lock key enables you to toggle between the alpha and numeric modes. See Number Lock (NUM) Key on page 6-11. SFT 34-Key SFT SFT SFT 43-Key 55-Key The shift key modifies only the next key pressed; it must be pressed before each key you wish to modify. Shift toggles the keyboard between uppercase alphabet mode and lowercase alphabet mode. Press the shift key twice to toggle Caps Lock on and off. When Caps Lock is toggled on, characters are uppercase; when toggled off, characters are lowercase. Using the Navigation Keys Located in the center of each keyboard for easy access with either hand, the navigation keys navigate the cursor through application screens. Key Function VOL Moves the cursor up one row or line. Moves the cursor down one row or line.

VOL Raises the volume.

PG Lowers the volume.

PG VOL Moves the cursor up one page. PG Blue Blue Red 6 - 3 Draft 8/12/11 Key Function

PG Red Moves the cursor down one page. Moves the cursor one character to the right. Moves the cursor one character to the left. Note: Additional functionality varies according to the application in use. 6 - 4 Preliminary Draft 8/12/11 34-Key Alpha/Numeric Keyboard Left Navigation\SEND key SCAN key Right Navigation\END key Escape key SEND ESC END SCAN Backlight\Flashlight key Tab key TAB Up Navigation key 1 4 GHI 7 PQRS

. F1 F5 SFT Space key Shift key Power key SP

ALT CTRL VOL PG 2 ABC 5 8 0

F2 F6 JKL T U V

F3 F7

BKSP

ENT DEF MNO WXYZ 3 6 9

F4 F8

DEL ALPHA Enter key Down Navigation key ALPHA Mode keys Backspace key Delete key ALPHA key CTRL\ALT key Red key Blue key Note: The flashlight function (

) is disabled on all 99GX models. ALPHA Key The ALPHA lock key enables you to toggle between the alpha and numeric keyboard modes. On the 34-

Key Keyboard, numeric mode is the default. Press the ALPHA key once to switch to ALPHA lock mode. Press the ALPHA key again to exit the ALPHA lock mode. 6 - 5 Preliminary Draft 8/12/11 34-Key Alpha/Numeric Keyboard Combinations Key ESC Left Scan Right NUM

(Default) Escape Left Scan Right Shift-NUM ALPHA Shift-

ALPHA Blue Red Left Left Left Send

(Phone) Left Right Right Right End (Phone) Right Backlight Toggles Keyboard Backlight On/Off TAB Up Down Tab Up Tab Up Tab Up Tab Up Down Down Down Down Enter Return Toggles Flashlight On/Off (99EX models only) Toggles Keyboard Backlight On/

Off Tab Tab Volume Up Prior Volume Down Next

(ampersand) a,b,c d,e,f g,h,i j,k,l m,n,o p,q,r,s A,B,C D,E,F G,H,I J,K,L M,N,O P,Q,R,S

* (multiply) t,u,v T,U,V

) w,x,y,z W,X,Y,Z

. (period)

* (multiply)

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 Period

. (period) 0 0 6 - 6 Preliminary Draft 8/12/11 Key NUM

(Default) Comma

, (comma) Shift-NUM ALPHA Shift-

ALPHA Blue Red

F1 F2 F3 F4

, (comma) F1 F2 F3 F4

F1 F2 F3 F4 F1 F2 F3 F4 Shift Space Shift Space Shift Space Shift Space Backspace Backspace Backspace Backspace

F5 F6 F7 F8 Space Backspace Delete Off/On Control Blue Red Delete Delete Delete Underscore Delete Control Blue Red Menu Blue Red F1 F2 F3 F4 SFT SP BKSP DEL Power CTRL Blue Red ALPHA Toggles between ALPHA mode and NUM Lock mode 6 - 7 Preliminary Draft 8/12/11 34-Key Numeric (Calculator) Keyboard Left Navigation\SEND key SCAN key Right Navigation\END key Escape key SEND ESC END SCAN Backlight\Flashlight key Tab key Up Navigation key Space key Shift key Power key TAB 7 4 GHI 1 PQRS VOL PG 8 5 2 ABC JKL T U V ENT DEF MNO WXYZ 9 6 3

. F1 F5 SFT 0

F2 F6 SP

ALT CTRL

F3 F7

BKSP

F4 F8

DEL ALPHA Enter key Down Navigation key Backspace key Delete key ALPHA key CTRL\ALT key Red key Blue key Note: The flashlight function (

) is disabled on all 99GX models. ALPHA Key The ALPHA lock key enables you to toggle between the alpha and numeric keyboard modes. On the 34-

Key Keyboard, numeric mode is the default. Press the ALPHA key once to switch to ALPHA lock mode. Press the ALPHA key again to exit the ALPHA lock mode. 6 - 8 Preliminary Draft 8/12/11 34-Key Numeric (Calculator) Keyboard Combinations Key ESC Left Scan Right NUM

(Default) Escape Left Scan Right Shift-NUM ALPHA Shift-

ALPHA Blue Red Left Left Left Send

(Phone) Left Right Right Right End (Phone) Right Backlight Toggles Keyboard Backlight On/Off TAB Up Down Tab Up Tab Up Tab Up Tab Up Down Down Down Down Enter Return Toggles Flashlight On/Off (99EX models only) Toggles Keyboard Backlight On/

Off Tab Tab Volume Up Prior Volume Down Next 7 8 9 4 5 6 1 2 3 7 8 9 4 5 6 1 2 3 Period

. (period) 0 0

(ampersand) a,b,c d,e,f g,h,i j,k,l m,n,o p,q,r,s A,B,C D,E,F G,H,I J,K,L M,N,O P,Q,R,S

* (multiply) t,u,v T,U,V

) w,x,y,z W,X,Y,Z

. (period)

* (multiply)

6 - 9 Preliminary Draft 8/12/11 Key NUM

(Default) Comma

, (comma) Shift-NUM ALPHA Shift-

ALPHA Blue Red

F1 F2 F3 F4

, (comma) F1 F2 F3 F4

F1 F2 F3 F4 F1 F2 F3 F4 Shift Space Shift Space Shift Space Shift Space Backspace Backspace Backspace Backspace

F5 F6 F7 F8 Space Backspace Delete Off/On Control Blue Red Delete Delete Delete Underscore Delete Control Blue Red Menu Blue Red F1 F2 F3 F4 SFT SP BKSP DEL Power CTRL Blue Red ALPHA Toggles between ALPHA mode and NUM Lock mode 6 - 10 Preliminary Draft 8/12/11 43-Key Alpha/Numeric Keyboard Left Navigation\SEND key SCAN key Right Navigation\END key Escape key SEND ESC END SCAN Backlight\Flashlight key Tab key TAB VOL PG ENT Enter key Up Navigation key A B

F1 1 F2 C 2 F3 F G H 4 F7 5 F8 F6 D 3 F4 I 6 F9 K

F11 L M N 7 F12 8 F13 9 F14 P Q R

. F17 0 F18 F16 S

, F19 Space key Shift key Power key U F21 V W X F22 F23 F24 SFT SP BKSP ALT CTRL E F5 J F10 O F15 T F20 Y F25 Z NUM Down Navigation key Number (NUM) Mode keys Backspace key Number (NUM) Lock key CTRL\ALT key Blue key Red key Note: The flashlight function (

) is disabled on all 99GX models. Number Lock (NUM) Key The Number Lock key enables you to toggle between the alpha and numeric keyboard modes. On the 43-key keyboard, alpha mode is the default. Press the NUM key once to switch to NUM lock mode. Press the NUM key again to exit the NUM lock mode. 6 - 11 Draft 8/12/11 43-Key Keyboard Combinations Key ESC Left Scan Right ALPHA

(Default) Escape Left Scan Right Shift-ALPHA NUM Shift-NUM Blue Red Left Left Left Send

(Phone) Left Right Right Right Backlight Toggles Keyboard Backlight On/Off TAB Up Tab Up Up Up Up Down Down Down Down Down Enter Return a b c d e f g h i j k A B C D E F G H I J K 6 - 12 A B C D E F G H I J K 1 2 3 4 5 6

End

(Phone) Right Toggles Flashlight On/Off (99EX models only) Toggles Keyboard Backlight On/

Off Volume Up

(Phone) Volume Down

(Phone) Prior Next

+ (add)

- (subtract)

F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 Preliminary Draft 8/12/11 Key ALPHA

(Default) Shift-ALPHA NUM Shift-NUM Blue Red L M N O P Q R S T U V W X Y l m n o p q r s t u v w x y SFT SP Shift Space BKSP Backspace Z Power CTRL Blue Red NUM z Off/On Control Blue Red L M N O P Q R S T U V W X Y Z 7 8 9

. (period) 0

, (comma)

* (multiply)

Shift Control Blue Red F12 F13 F14 F15 F16 F17 F18 F19 F20 F21 F22 F23 F24 F25 Red

* (multiply)

(underscore)

Menu Blue Toggles between NUM lock mode and ALPHA mode 6 - 13 Preliminary Draft 8/12/11 55-Key Full Alpha/Numeric Keyboard Left Navigation\SEND key SCAN key Right Navigation\END key Escape key ESC Tab key Up Navigation key Space key Backspace key Delete key Shift key TAB SP BKSP DEL SFT A F K P U

F1

F6

F11

F16 F21 SCAN VOL PG 1 4 7

. B G L Q V

F2

F7 F12

F17 F22

2 5 8 0 D C H I N M R S W X

F3

F8 F13 F18 F23 Power key ALT CTRL Backlight\Flashlight key Enter key Down Navigation key ENT 3 6 9

, E J O T Y

F5 F10

F15 F20 F25 Z

) F4

F9

F14 F19 F24 CTRL\ALT key Red key Blue key Note: The flashlight function (

) is disabled on all 99GX models. 6 - 14 Preliminary Draft 8/12/11 55-Key Keyboard Combinations Key ESC Left Scan Right Normal Escape Left Scan Right Left Right Shift Blue Red Left Send

(Phone) Backlight Toggle Keyboard Backlight On/Off End

(Phone) Right Toggle Flashlight On/

Off (99EX models only) Toggle Keyboard Backlight On/

Off TAB Up Down Enter SP 1 2 3 Tab Up Down Return Space 1 2 BKSP Backspace 4 5 6 4 5 6 DEL Delete 7 8 9 7 8 9 Up Down Volume Up Prior Volume Down Next

1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 6 - 15 Preliminary Draft 8/12/11 Normal Shift Blue Red Key SHIFT Period 0 Shift

. (period) 0 Comma

, (comma) a b c d e f g h i j k l m n o p q r s t u A B C D E F G H I J K L M N O P Q R S T U 6 - 16

A B C D E F G H I J K L M N O P Q R S T U

* (multiply)

. (period) 0 0 _ (underscore)

, (comma)

+ (add)

- (subtract)

F1 F2 F3 F4 F5 F6 F7 F8 F9 _ (underscore) F10

(back quote)

(quotes) F11 F12 F13 F14 F15 F16 F17 F18 F19

" (back quotes) F20 u or U F21 Preliminary Draft 8/12/11 Key Normal Shift V W X Y V W X Y Power CTRL Blue Red Z v w x y Off/On Control Blue Red z Red F22 F23 F24 F25 Blue v or V w or W x or X y or Y Menu Z z or Z z or Z 6 - 17 Preliminary Draft 8/12/11 6 - 18 7 Preliminary Draft 8/12/11 System Settings Overview Customized settings are available on the System Settings menu. Tap screen opens.

> Settings and the settings Icon Bluetooth Clock &

Alarms Lock Description Configures the Bluetooth radio. See Working with the Bluetooth Radio on page 10-

1. Set the system clock, date, time and schedule alarms. See Clock & Alarms on page 7-2. Password protect the terminal to limit access to the terminal. Sounds &

Notifications Set the sound volume, enable or disable sounds for specific actions, set sound parameters for system notifications and enable or disable vibrator notification. Home Customize the look and the information displayed on the Home screen. Connections Establishes network connections settings. See Connections Menu on page 8-1. Personal Customizes buttons, and set SIP options. See Personal Menu on page 7-3. 7 - 1 Preliminary Draft 8/12/11 Icon System Description Adjusts system settings. See System Menu on page 7-7. Microsoft My Phone Synchronizes your phones contacts, calendar, tasks, text messages, music, photos, videos, and other documents with your My Phone account at http:\\myphone.microsoft.com. Clock & Alarms The Clock & Alarms settings can be accessed from the Home screen or the Settings Menu. 1. On the Home screen, tap the line that displays the time and date OR Tap

> Settings > Clock & Alarms, 2. The Clock Settings screen appears. This setting sets the system clock. All scheduled items run according to this setting. Tap the arrow to the right of the time zone to open the drop down menu. Select the appropiate time zone from the menu. Set the correct time and date in the remaining fields and tap OK to save. 7 - 2 Draft 8/12/11 Personal Menu To access the Personal Menu, tap sonal Menu.

> Settings > Personal. The screen opens displaying the Per-

Icon Buttons Owner Information Phone Description Program the side buttons to perform specific tasks. See Buttons on page 7-3. Enter your contact information (e.g., name, company, address, telephone number and E-mail address). This Phone icon is present on Dolphin models equipped with WWAN radio (GSM/

UMTS/GPRS/EDGE) capabilities. Tap this icon to set up user parameters. See Setup Options on page 9-7. Buttons The Buttons setting programs certain keyboard buttons to launch applications or execute commands. Enable HotKeys Default Buttons setting assignments are inactive until you enable the HotKeys Power Tool.

> Power Tools and tap the HotKeys icon Tap assignments in the Buttons setting are active. For more information about the HotKeys Power Tool, refer to the Dolphin Power Tools Users Guide, which is available for download from the web at www.honeywellaidc.com. once. HotKeys is enabled, and the button 7 - 3 Draft 8/12/11 Changing Button Assignments 1. After HotKeys is enabled, tap

> Settings > Personal

> Buttons

. Note: The buttons that appear on this window are the only buttons that can be programmed via the Buttons setting. You cannot add buttons to this window. 2. To change button assignment, tap on the name of the button in the Button column, and then select a program or command in the Assign a program drop down list. 3. Tap OK to save. 4. Press the button to verify that the program is launched or action performed. Available Applications The Assign a program list contains the applications installed on the terminal. If there is a program installed that you would like to see in this list, paste a Shortcut to the program in the \\Windows\Start Menu\Programs folder. For instructions about creating shortcuts, see Using File Explorer on page 7-5. Additional Functions The Assign a program list also contains the following commands:

Command Description

<Context Menu>

Performs the same function as tap-and-hold to open the context menu for the control.

<Input Panel>

Opens the soft input panel.

<Left Softkey>

Opens the menu or performs the action displayed on the left side of the Command bar.

<Scan1>

<None>

Activates the scanner/imager. Nothing happens when the button is pressed.

<OK/Close>

Performs the same function as tapping OK on the screen. 7 - 4 Draft 8/12/11 Command Description

<Right Softkey>

Opens the menu or performs the action displayed on the right side of the Command bar.

<Scan2>

Activates the scanner/imager.

<Rotate Screen> Changes the screen orientation from portrait to landscape.

<Scroll Down>

Scrolls down in the open application.

<Scroll Left>

Scrolls left in the open application.

<Scroll Right>

Scrolls right in the open application.

<Scroll Up>

Scrolls up in the open application.

<Start Menu>

Opens the Start menu. Using File Explorer If you do not see the program listed, you can either use File Explorer to move the program or ActiveSync on the workstation to create a shortcut to the program and place the shortcut in the Start Menu folder. Note: We recommend that you Copy and Paste Shortcut so that you do not alter your program configurations by accident. Using Copy and Paste Shortcut (as opposed to Cut and Paste) ensures that the program files remain where they need to be for the system to find them to perform system functions. 1. Tap

> File Explorer

, and navigate to the program (My Device > Program Files). 2. Tap and hold on the program, then tap Copy on the pop-up menu. 7 - 5 Preliminary Draft 8/12/11 3. Navigate to the Windows folder and open the Start Menu (My Device > Windows > Start Menu >

Programs), tap and hold a blank area of the window, and tap Paste Shortcut on the pop-up menu. Note: If there is no blank space available in the window, tap on Menu > Edit > Paste Shortcut. 4. Tap to verify that the program now appears on the Start menu. Using ActiveSync on the Workstation Here, you are performing the same basic process as on the terminal, except that you are using the Explore utility (Windows Explorer) to copy and paste the shortcut. 1. Open ActiveSync > Explore and navigate to the program. 2. Right-click on the program and select Create Shortcut. 3. Select the shortcut, right-click, and select Cut. 4. Navigate to the Start Menu folder (Windows > Start Menu > Programs). 5. Right-click on an empty area and select Paste Shortcut. 6. On the terminal, tap the Start menu. 7. Verify that program appears. 7 - 6 Preliminary Draft 8/12/11 System Menu The System menu enables you to verify and sometimes alter system parameters. To access the System menu, go to Start > Settings > System. Tap the appropriate icon to open that system setting. Icon About See Page See About on page 7-8. Backlight See Backlight on page 7-9. Battery See Battery on page 7-10. Certificates See Certificates on page 7-10. Customer Feedback See Customer Feedback on page 7-10. Encryption See Encryption on page 7-11. Error Reporting See Error Reporting on page 7-11. 7 - 7 Preliminary Draft 8/12/11 Icon External GPS Five Volt Control Smart Sensors Managed Programs Memory Power RIL Regional Settings Remove Programs Screen Task Manager See Page See External GPS on page 7-11. See Five Volt Control on page 7-12. See Smart Sensor on page 7-12. See Managed Programs on page 7-14. See Memory on page 7-15. See Power on page 7-16. See RIL on page 7-16. See Regional Settings on page 7-16. See Remove Programs on page 7-17. See Screen on page 7-18. See Task Manager on page 7-19. About The About system setting displays specific information about the terminal. It contains three screens:

Version Screen Device ID Screen Displays the information the terminal uses to identify itself to other devices. It can be important Displays the information about the software, operating system, and processor. to know this information if the Dolphin terminal is going to be part of a networked system of devices. Device name: Displays the systems default name. (This is the name used by ActiveSync.) Description: Displays the description of the device ID. 7 - 8 Preliminary Draft 8/12/11 Copyrights Screen Displays important copyright information. Backlight The Backlight system setting enables you to customize backlight functionality for the display. The back-

light for the color display is user-defined. The Backlight system setting screen contains three tabs: Bat-

tery Power, External Power, and Brightness. Tap

> Settings > System > Backlight. Battery Power Tab External Power Tab Brightness Tab The Battery Power tab determines the backlight timeout when the terminal is running on battery power. The External Power tab determines the backlight timeout when the terminal is running on external power. The options on the power tabs are the same. Turn off backlight: Select how many minutes you want to elapse before the backlight automatically turns off. Turn on backlight: Select this option if you want the backlight to turn on when the button is pressed or the touch screen is tapped. The Brightness tab determines the backlight intensity. Move the slider to set the intensity of the back-

light. The default is 8. The Auto adjust backlight option allows the light sensor to automatically adjust the display brightness based on the ambient light. The Auto adjust backlight option is also accessible from the Smart Sensors applet, see Smart Sensor on page 7-12. 7 - 9 Preliminary Draft 8/12/11 Battery The Battery system settings menu contains two tabs: Battery Status and Log Config. The Battery Sta-

tus tab provides the status of the main battery pack (e.g., Battery Time to Full or Battery Time to Empty, Voltage, Current, Temperature, Chemistry, and Serial Number). The Log Config Tab allows you to con-

figure the BatteryLogFile. Tap

> Settings > System > Battery Battery Status Tab Log Config Tab When external power is supplied to the terminal, Battery Time to Full is listed. When power is supplied by the battery pack, Battery Time to Empty is listed. Certificates Certificates shows you the certificates that are recognized by the operating system. It contains three screens. Intermediate Screen Personal Screen Root Screen Customer Feedback Customer Feedback gives you the option to participate in the Microsoft Customer Experience Improve-

ment Program. 7 - 10 Preliminary Draft 8/12/11 Encryption Encryption gives you the option of encrypting files placed on storage cards so that those files cannot be read by any other device. Error Reporting Error Reporting gives you the option of enabling or disabling the error reporting function of Windows Embedded Handheld 6.5. External GPS External GPS determines which port a third-party GPS software application can use to access the GPS receiver. Battery Power Tab External Power Tab Brightness Tab Note: You need the installation parameters from the GPS manufacturer to configure the connection. 7 - 11 Preliminary Draft 8/12/11 Five Volt Control Five Volt Control gives you the option to manually enable 5V output to supply power to an external device. By default, 5-Volt Output automatically turns on when AC power is applied to the terminal. If you want to use a USB memory stick without AC power, then you must manually turn on the 5-Volt Output. Do not leave 5-Volt output enabled when you are not using it to supply power to an external device. Smart Sensor The Smart Sensor configuration utility enables you to configure the Dolphins integrated accelerometer, light, and proximity sensors. Tap

> Settings > System > Smart Sensor. Motion Settings Motion Settings enable you to customize how the terminal responds to motion and object orientation for advanced power management. Display Settings enables or disables Auto Display Orientation. When enabled, the Dolphin's display automatically switches between portrait and landscape depending on how you hold the terminal. Power Management Settings customize how the terminal responds to object orientation and motion. Save power by turning off the display or suspending the terminal when it is placed face down. Modify the Motion Detection settings to wake the terminal from suspend mode or prevent the terminal from entering suspend mode when motion is detected. 7 - 12 Preliminary Draft 8/12/11 Event Track displays an event log summary of detected free fall events exceeding 2 ft. over 250 ms. The summary includes the time, date, and duration of the most recent 50 events. Several options are provided for audible notification of free fall events. Light Settings Proximity Settings Light Sensor Settings customize how the terminal responds to the environmental lighting conditions in which the terminal is being used. Enable Display Backlight Adjustment automatically adjusts the brightness of the display screen depending on the environmental lighting conditions. Enable Automatic Keypad Backlight automatically turns the keypad backlight on or off depending on the environmental lighting conditions. Proximity Sensor Settings customize how the terminal responds to objects detected close to the touch screen display

(e.g., a person's face, carrying holster, or tabletop). When enabled, the terminal automatically turns the display off when it detects an object in close proximity to the entire touch panel display. The display turns back on when the sensor detects the removal of the object. 7 - 13 Preliminary Draft 8/12/11 Accelerometer Calibration Tap Start to calibrate the integrated accelerometer sensor used for motion detection. When calibration is complete, the

"Accelerometer Calibration Finished!" message window appears. Managed Programs Managed Programs are a list of programs that are managed if enrolled to enterprise domain. Managed Programs is the client-side that works with the server product System Center Mobile Device Manager

(MDM). MDM consists of MDM Gateway Server and one or more computers that run MDM Device Man-

agement Server; MDM Enrollment Server; and Microsoft SQL Server 2005 databases. It lets system administrators:

provide an authenticated connection to LOB applications, managed Group Policy, and application packages. use Group Policy and software packages to manage the enrolled Windows phones (enforce policy, wipe devices, etc.). manage the requests for and retrieving of certificates for devices and for creating the Active Directory Domain Service objects that represent these devices. By using these objects, you can manage the devices as if they were members of a domain. 7 - 14 Draft 8/12/11 Memory The Memory applet shows the capacity and usage of the Storage and Program portions of the Flash file system. The Storage portion includes the IPSM folder, which can be detailed under the Storage Card tab. When the Program portion becomes too full, you can use the Task Manager to remove any unneces-

sary tasks. Main Screen This screen displays the usage statistics of the flash memory. Storage Card Screen This screen displays the current capacity and usage sta-

tistics of the selected memory type: IPSM or Storage Card. Select the memory type from the drop-down list. IPSM is selected by default. Total storage card memory = The total MB of memory capacity of IPSM or Storage Card. In use = The MB currently being used. Free = The MB that is still available for use. IPSMShort for Internal Persistent Storage Manager. Data or programs stored in the IPSM are not affected when the operating system is upgraded. Autoinstall programs, for example, are stored in \\IPSM\Honeywell\Autoinstall so that they are always installed after an operating system upgrade or factory reset. Contact a Honeywell technical support representative for more information on how to perform a factory reset. For contact information, see Technical Assistance on page 18-2. Storage CardYou can install one memory card in Dolphin terminals (see Installing a Memory Card on page 3-18). If a storage card is installed in the terminal, you can select it in the drop-down list and see capacity and usage statistics for the card. 7 - 15 Preliminary Draft 8/12/11 RIL The RIL Information screen displays useful statistics for the GSM WAN Voice module (PH8). To verify whether or not the GSM radio is enabled, check the Dolphin Wireless Manager (see page 8-6). Power Power system settings contains two tabs: Battery and Advanced Tap

> Settings > System > Power Battery Tab Advanced Tab The battery tab displays the power level status of the main battery and the status of the backup battery. Note: The Backup Battery gauge registers either 0% or 100%. The percentage is not an indication of the level of charge remaining on the backup battery. An installed and functional battery registers 100%. A total discharge or a battery error registers 0%. For detailed information on the main battery pack, see Battery on page 7-10. Determines power time-outs. For On battery power, select from the drop-down list, the number of minutes of inactivity you want to pass before the terminal powers off when running on battery power. For On external power, select from the drop-down list, the number of minutes of inactivity you want to pass before the terminal powers off when running on external power. Note: When the terminal powers off, it enters Suspend Mode, see page 2-11 for additional information. Regional Settings Regional Settings enables you to customize the appearance and formatting to your geographic region. Specifically, you can customize numbers (i.e., number of decimal places allowed), currency (i.e.,using the $ or symbol), time, and date. These specifications apply to all screens, including the Home screen. The Region tab displays an overview of the region selected in the drop-down list at the top. 7 - 16 Preliminary Draft 8/12/11 The terminal is loaded with a number of pre-programmed regional settings. Select one from the list and the results appear on the screen. To see specific settings or to change a specific setting, tap on one of the tabs, make the change, and tap OK to save it. Remove Programs Remove Programs enables you to remove programs installed on the terminal. Any program (usually CAB or DLL files) stored in the \\IPSM\Honeywell\Autoinstall folder re-installs after a software upgrade or a factory reset. If a program is manually removed using the Remove Programs application, the program does not re-install on a hard or soft reset. Note: A program (file) does not automatically install if it is added to the \\IPSM\Honeywell\Autoinstall folder and a hard or soft reset is performed. For information on program installation, see Installing Additional Software on page 8-10. For information about the system resets, see Resetting the Terminal on page 2-11. See Honeywell sup-

port for more information on how to perform a factory reset. 1. Tap Remove Programs. In the list, select the program you want to remove. 2. Tap Remove. The following message appears:

3. Tap Yes. Wait while the program is removed. 4. Verify that the program no longer appears in the list. 7 - 17 Preliminary Draft 8/12/11 Screen The Screen system setting contains three screens: General, Clear Type, and Text Size. General Screen Orientation The General screen enables you to set the dynamic screen rotation. Three choices of screen orientation are supported:

Portrait, Landscape (right-handed), and Landscape (left-

handed). Align Screen The General Tab also allows you to re-align the screen. You need to re-align the screen if tapping buttons or icons with the stylus no longer seems to work appropriately. Tapping Align Screen brings up the align screen window where you are guided to tap a target several times. This re-

calibrates how the touch screen receives input. Alignment should always be performed with a stylus designed for touch panel applications. The small point is required for accurate calibration. Press the stylus firmly into the center of the cross-hair target once and release. Do not double-tap the target. ClearType Screen The display supports ClearType font rendering, which is a Microsoft technology that dramatically increases the readability of text on LCD displays. To enable ClearType font rendering, select Enable ClearType and tap OK. For more information about ClearType font rendering, visit:

www.microsoft.com/typography/WhatIsClearType.mspx. 7 - 18 Text Size Screen Draft 8/12/11 The Text Size screen enables you to perform font scaling within certain views of the:

Home screen, Contacts, Calendar, Messaging, and Tasks. Font scaling means that you can increase or decrease the point size of the font on application windows. To change the font size, move the slider toward Smallest or Largest. The Example text changes to reflect the font change. Tap OK to save the new font size setting. Task Manager The Task Manager provides information about applications and processes running on your mobile com-

puter. You can use the Task Manager to monitor the memory and CPU usage of specific applications and processes. Check the Task Manager when you are receiving out of memory errors or when the mobile computer is running slowly. 7 - 19 Preliminary Draft 8/12/11 Using the Task Manager Applications To view the status of the programs running on your mobile computer, tap the Menu button at the bottom of the screen, then tap View > Applications. From the application list, you can:

Tap and hold on an application, then tap Switch To on the pop-up menu. Tap and hold on an application, then tap End Task or End All Tasks on the pop-up menu. Note: Anytime you stop a running program, it frees up memory. To free up memory, return to the running program, save your data, and close the application. Processes To view information about the processes running on the mobile computer, tap the Menu button at the bottom of the screen, then tap View > Processes. 7 - 20 8 Preliminary Draft 8/12/11 Communication Connections Menu The Connections system setting provides access to the terminals various wireless communication options. Icon Beam Tapping this icon Enables infrared communication. See Receiving Data on page 8-3. Connections Opens Microsofts connections manager. See Connections Manager on page 8-4. Dolphin Wireless Manager Domain Enroll USB to PC Network Cards Manages the wireless radios installed in the terminal. See Dolphin Wireless Manager on page 8-6. Note: The Dolphin Wireless Manager icon may not appear on the Connections menu on terminals running Microsoft Windows Embedded Handheld 6.5 Classic. For information on how to access the Dolphin Wireless Manager, see page 8-6. Opens the Enrollment screen for connecting your phone with company resources. Note: System administrator password is required for domain enrollment. Enables advanced wired USB to PC communication via sync sofware. See Connecting and Synchronizing the Terminal and Workstation on page 8-8. Manage Network card settings. Note: All server-assigned IP addresses use Dynamic Host Configuration Protocol (DHCP). 8 - 1 Draft 8/12/11 Using the IrDA Port Using the IrDA port, you can send and receive data between the terminal and other devices equipped with infrared. This can include, but is not limited to, Windows Embedded Handheld information such as Contacts and Tasks, as well as software upgrades. IrDA Port Location IrDA Port Note: Your Dolphin model may differ from the models illustrated; however, the features noted are standard for all 99EX and 99GX models unless otherwise noted. To send or receive, the IrDA ports of both devices - whether it is two terminals, or a terminal and a host device - must be aligned with each other and within a close range. The maximum data transfer speed is 115 Kbps. Sending Data 1. Align the IrDA ports. 2. Open the program where you created the item you want to send and locate the item in the list. You can also beam files, but not folders, from File Explorer. 3. Tap and hold the item and select Beam File. 8 - 2 Preliminary Draft 8/12/11 4. The IrDA port searches for a receiving IrDA port in the vicinity. The selected device reads Pending. 5. When the IrDA port finds the aligned IrDA port, it immediately starts sending the selected file. The selected device reads Sending. 6. When the file transfer is complete, the selected device reads Done. Receiving Data The Beam Setting must be set to receive all incoming beams from other infrared devices. 1. Verify that beam settings are set to receive. Tap Beam Settings window should appear as follows:

> Settings > Connections > Beam. The 2. Align the IrDA ports. 3. Have the owner of the other device send the data to you. 4. Your terminal automatically begins receiving the data. 5. A popup message appears asking if you want to save the incoming file. 6. Tap Yes to receive the file. 8 - 3 Preliminary Draft 8/12/11 Connections Manager Microsofts Connections Manager sets up multiple network connections to Internet Service Providers

(ISPs) via external modem. Do NOT enter connection parameters in the Connections Manager if:

you are using one of the on-board wireless radios to connect to a network. The Dolphin terminal uses the settings from each radios configuration utility to connect. The connections manager is used primarily to setup WAN modem dial up connections. you are using Wireless Zero Config. By default, WZC is disabled on Dolphin terminals. To Access the Connections Manager Tap

> Settings > Connections

> Connections

. Tasks The Tasks screen enables you to initially configure, and then manage network settings when using a modem. Select an item in this list and then complete the setup screens that follow with the appropriate information for your network. My ISP The links under this heading enables you to add and manage modem connections to an ISP. To com-

plete the setup screens, obtain the following information from your ISP:

ISP dial-up access telephone number Username Password TCP/IP settings My Work Network These links enable you to establish the following connections types:

Modem Virtual Private Network (VPN) 8 - 4