FCC ID: HD5-PM11AX HWBPM11AX-PRTM Wi-Fi/BT MODULE

USER MANUAL WIFI & BT Module MODEL NO:

HWBPM11AX -PRTM 802.11a/b/g/n/ac/ax

BT 5.1 System on Module Honeywell 1 CONTENTS Introduction: ......................................................................................................................................................................................... 3 Block diagram ....................................................................................................................................................................................... 5 Technical specifications .................................................................................................................................................................. 6 Recommended operating conditions (MODULE) ..................................................................................................................... 6 Operating conditions for WLAN ...................................................................................................................................................... 6 Operating conditions for BLUETOOTH ......................................................................................................................................... 7 Footprint (front & back view) ...................................................................................................................................................... 8 Module pin details & configurations ........................................................................................................................................ 9 Wireless specifications ................................................................................................................................................................. 10 WLAN Specifications ....................................................................................................................................................................... 11 BLUETOOTH Specifications ......................................................................................................................................................... 18 Antenna Specifications .................................................................................................................................................................. 19 Antenna Recommendations........................................................................................................................................................ 24 Layout guidelines.............................................................................................................................................................................. 25 Agency approvals .............................................................................................................................................................................. 26 Labelling guidelines for product .............................................................................................................................................. 28 Page 2 of 28 INTRODUCTION:

This document specifies the details for a Wi-Fi Module with 802.11a/b/g/n/ac/ax 2x2 MIMO with BT 5.1 RFSOM module called with Honeywell Part No and following are the FCC & IC IDs. 3011-2325-001 PCB S/A, RFSOM Wi-Fi, BT - PM65 FCC ID: HD5-PM11AX IC: 1693B-PM11AX Model Name: HWBPM11AX-PRTM This HWBPM11AX-PRTM module is a Wi-Fi, BT system on module which will be placed inside the Honeywell products like printers, barcode scanners, RFID readers etc. to enable wireless connectivity. This module includes MAC & physical layer of 802.11a/b/g/n/ac/ax and the Bluetooth modem. This module operates on 5.0V DC Power supply with internal on-board regulation to generate 3.3v for powering ON all the circuits. The module uses internal power amplifier and LNA for 2.4GHz frequency band and an external front end chip for 5GHz frequency band. All filters and diplexers are included in the module to ensure maximum power flatness and optimum VSWR. The module has one antenna chain for 2X2 output for Wi-Fi. The module shall use WM-BAX-BM-57 USI SiP module with Broadcom BCM43752 chipset which includes LNA, switch, and internal power amplifier (iPA) for small form factor and optimum performance. All filters and diplexers will be included in the module to ensure maximum power flatness and optimum VSWR. The module will perform with all legacy hardware having data rates as low as 1Mbps. When running 802.11 ac in 2 x 2 MIMO mode, data rates are expected to reach 1200 Mbps or more. This chipset also supports concurrent operation of Bluetooth (Version 5.1) for wireless connectivity during browsing or other device applications. Along with both standard and high speed (HS) Bluetooth data rates, Bluetooth low energy modes are also supported. Hardware WAPI acceleration engine, AES, TKIP, WPA and WPA2 are supported to provide the latest security requirement on your network The Device communicates with HOST using SDIO interface for WIFI and UART interface for BLUETOOTH. Page 3 of 28 HWBPM11AX-PRTM System on Module Features IEEE 802.11a/b/g/n/ac/ax 2x2 MIMO Bluetooth 5.1 + HS Bluetooth-WLAN coexistence Wi-Fi Wake on Wireless (WoW) 20MHz /40MHz bandwidth at 2.4GHz 20/40/80 MHz bandwidth at 5GHz Internal PA/LNA RF SOM Size: 15 mm x 15 mm, LGA Package 802.11 k/v/r Low Current consumption in IEEE PS and Deep Sleep Wi-Fi Security methods: WPA, WPA2 and TKIP, AES, CCX, WPS Wi-Fi + BT Coexistence with simultaneous video streaming over Wi-Fi and voice call over BT Supports both WLAN Station mode and WLAN AP mode. Page 4 of 28 BLOCK DIAGRAM HWBPM11AX-PRTM module is designed based on WM-BAX-BM-57 USI SiP module with Broadcom BCM43752 chipset solution. It supports generic SDIO, UART interface to connect the WLAN/BT to the host processor. A simplified block diagram of the HWBPM11AX-PRTM module is depicted in above picture Page 5 of 28 TECHNICAL SPECIFICATIONS RECOMMENDED OPERATING CONDITIONS (MODULE) Operating Temperature:

-20 to 60C Humidity Storage Temperature:

Power Supply:

I/O Voltage levels Current Consumption Max 95% (Non-condensing, relative humidity)

- 30 to +70C

+5.0V DC, <1.0 A 3.3v for Digital IOs, 1.8v for SDIO stream As per below Table OPERATING CONDITIONS FOR WLAN Bandwidth

(MHz) Band

(GHz) VBAT VDDIO Unit

20 20 20 20 20 40 40 40 80 80 40 40 80 80 40 40 80 80

2.4 2.4 2.4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 0 0.08 0.01 0.09 250 256 360 361 567 366 370 570 374 600 370 700 387 707 369 687 380 711 4.7 3.3 3.7 3.5 3.7 2.6 2.6 2.6 2 2.6 2.1 2.3 1.6 2 2 2.2 1.6 1.9 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA Condition Off and Sleep Modes Off Sleep Active Transmit CCK 1 chain MCS8, Nss 1, HT20, SGI MCS8, Nss 2, HT20, SGI MCS7, SGI MCS15, SGI MCS7 MCS9, Nss 1, SGI MCS9, Nss 2, SGI MCS9, Nss 1, SGI MCS9, Nss 2, SGI MCS10, Nss 1, SGI MCS10, Nss 2, SGI MCS10, Nss 1, SGI MCS10, Nss 1, SGI MCS11, Nss 1, SGI MCS11, Nss 2, SGI MCS11, Nss 1, SGI MCS11, Nss 2, SGI Page 6 of 28 Active Receive 1 Mbps, 1 RX core 1 Mbps, 2 RX cores MCS7, HT20 1 RX core MCS7, HT20 2 RX cores MCS15, HT20 MCS7, SGI 1 RX core MCS7, SGI 2 RX core MCS15, SGI MCS7, SGI 1 RX core MCS7, SGI 2 RX core MCS15, SGI MCS9, Nss 1, SGI 1 RX core MCS9, Nss 1, SGI 2 RX cores MCS10, Nss 1, SGI 1 RX core MCS10, Nss 1, SGI 2 RX core MCS11, Nss 1, SGI 1 RX core MCS11, Nss 1, SGI 2 RX core 20 20 20 20 20 20 20 20 40 40 40 80 80 80 80 80 80 2.4 2.4 2.4 2.4 2.4 5 5 5 5 5 5 5 5 5 5 5 5 57.4 67 59.8 71.7 72.1 68.1 86.2 86.1 73.1 97 96 83.5 109.9 84.4 115.7 84.9 124.5 0.91 1.31 0.91 1.31 1.33 1.21 1.3 1.3 1.2 1.28 1.28 1.19 1.27 0.9 1 0.9 1.2 OPERATING CONDITIONS FOR BLUETOOTH Operating Mode Sleep Standard 1.28s inquiry scan 500 ms sniff master DM1/DH1 DM3/DH3 DM5/DH5 3DH5 master SCO HV3 master BLE 1.28 second scan BLE adv. unconnectable 1s BLE connected 1s Transmit 100% OnMax OP BDR Normal-Power TX Mode High-Power TX Mode VBAT VDDIO VBAT VDDIO 40 270 440 14.5 17.9 18.3 16.8 6.6 270 250 240 32.6 75 85 110 0.32 0.34 0.35 0.43 0.31 85 90 90 0.32 40 270 480 42.5 56.5 57.8 79.7 16.5 270 290 250 109 75 85 110 0.32 0.34 0.35 0.43 0.31 85 90 90 0.32 mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA Unit uA uA uA mA mA mA mA mA mA mA mA mA Page 7 of 28 FOOTPRINT (FRONT & BACK VIEW) Front View BACK View Page 8 of 28 MODULE PIN DETAILS & CONFIGURATIONS Signal Type Ground Ground Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Input/Output Ground Input/Output Ground Input/Output Ground Input/Output Ground Input/Output Ground Input/Output Ground Input/Output Ground Input/Output 5.0v DC Power Supply 5.0v DC Power Supply Ground Ground S.No PINOUT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 GND GND BT_UART_CTS_3V3 1.8V Dig I/O PS BT_UART_RTS_3V3 BT_HOST_WAKE_3V3 BT_UART_TX_3V3 EEPROM_SDA BT_UART_RX_3V3 EEPROM_SCL BT_EN_3V3 WIFI_WAKE_ON_3V3 GND WL_EN_3V3 GND SDIO_CLK GND SDIO_D3 GND SDIO_D2 GND SDIO_D1 GND SDIO_D0 GND SDIO_CMD 5.0v DC Power Supply 5.0v DC Power Supply GND GND Page 9 of 28 WIRELESS SPECIFICATIONS WLAN specifications :

Features WLAN Standards Antenna Port Frequency Band Number of Sub Channels Modulation Supported data rates Description IEEE 802 11a/b/g/n/ac/ax Support 2x2 MIMO streaming 2.400 GHz 2.484 GHz 4.900 GHz 5.845 GHz*

1~ 11Channels 36~ 48,52~ 64, 100~ 140, 149~ 165 Channels DSSS, CCK, OFDM, BPSK, QPSK,16QAM, 64QAM, 256QAM, 1024QAM 1, 2, 5.5, 11 (Mbps) 6, 9, 12, 18, 24, 36, 48, 54 (Mbps) HT20_MCS0 ~ HT20_MCS7 VHT80_MCS0 ~ VHT80_MCS9 HE80_MCS0 ~ HE80_MCS11

*Note: Band 5600 MHz to 5650 MHz is not supported for Canada RESTRICTIONS IN THE 5 GHZ BAND Within the 5.15 to 5.25 GHz band, UNII devices will be restricted to indoor operations only. RESTRICTIONS DANS LA BANDE DE 5 GHZ Dans la bande de 5,15 5,25 GHz, les appareils UNII seront restreints aux oprations intrieures. BLUETOOTH specifications :

The Radio specification is compliant with the Bluetooth 5.0 + EDR specification Features Frequency Band Number of Channels Modulation Supported data rates Antenna Port Description 2400 MHz ~ 2483.5 MHz 79 channels FHSS (Frequency Hopping Spread Spectrum), GFSK, DPSK BLE -1&2 Mbps BT 1Mbps, 2Mbps, 3Mbps Single Antenna for Wi-Fi and BT Page 10 of 28 WLAN SPECIFICATIONS Wi-Fi Power Table at 2.4GHz Band. Page 11 of 28 Wi-Fi Power Table at 5.GHz Band Page 12 of 28 Page 13 of 28 Page 14 of 28 BT Power Table BLE Power Table Page 15 of 28 Condition 11Mbps 1Mbps 11Mbps 1Mbps Condition 54 Mbps 6 Mbps 54 Mbps 6 Mbps Condition MCS7 MCS0 MCS7 MCS0 Condition MCS8 MCS0 MCS8 MCS0 Condition MCS11 MCS0 MCS11 MCS0 Min.

-10

-10 Min.

-20

-20 Min.

-20

-20 Min.

-20

-20 Min.

-20

-20 Typ.

-88.0

-96.0

Typ.

-74.0

-91.0

Typ.

-73.0

-90.0

Typ.

-70.0

-90.0

Typ.

-69.0

-90.0

Max. Unit

dBm

dBm dBm dBm Max. Unit

dBm

dBm dBm dBm Max. Unit

dBm

dBm dBm dBm Max. Unit

dBm

dBm dBm dBm Max. Unit

dBm

dBm dBm dBm 2.4GHz 802.11B RECEIVER Item Receiver Minimum Input Level Sensitivity

(PER< 8 %) Receiver Maximum Input Level

(PER< 8 %) 2.4GHz 802.11G RECEIVER Item Receiver Minimum Input Level Sensitivity

(PER< 10 %) Receiver Maximum Input Level

(PER< 10 %) 2.4GHz 802.11N RECEIVER Item Receiver Minimum Input Level Sensitivity

(PER< 10 %) Receiver Maximum Input Level

(PER< 10 %) 2.4GHz 802.11AC RECEIVER Item Receiver Minimum Input Level Sensitivity

(PER< 10 %) Receiver Maximum Input Level

(PER< 10 %) 2.4GHz 802.11AX RECEIVER Item Receiver Minimum Input Level Sensitivity

(PER< 10 %) Receiver Maximum Input Level

(PER< 10 %) Page 16 of 28 5GHz 802.11AC 20MHz RECEIVER Item Receiver Minimum Input Level Sensitivity

(PER< 10 %) Receiver Maximum Input Level

(PER< 10 %) 5GHz 802.11AC 40MHz RECEIVER Item Receiver Minimum Input Level Sensitivity

(PER< 10 %) Receiver Maximum Input Level

(PER< 10 %) 5GHz 802.11AC 80MHz RECEIVER Item Receiver Minimum Input Level Sensitivity

(PER< 10 %) Receiver Maximum Input Level

(PER< 10 %) 5GHz 802.11AX 20MHz RECEIVER Item Receiver Minimum Input Level Sensitivity

(PER< 10 %) Receiver Maximum Input Level

(PER< 10 %) 5GHz 802.11AX 40MHz RECEIVER Item Receiver Minimum Input Level Sensitivity

(PER< 10 %) Receiver Maximum Input Level

(PER< 10 %) 5GHz 802.11AX840MHz RECEIVER Item Receiver Minimum Input Level Sensitivity

(PER< 10 %) Receiver Maximum Input Level

(PER< 10 %) Page 17 of 28 Condition MCS8 MCS0 MCS8 MCS0 Condition MCS9 MCS0 MCS9 MCS0 Condition MCS9 MCS0 MCS9 Condition MCS9 MCS0 MCS9 Condition MCS9 MCS0 MCS9 Condition MCS9 MCS0 MCS9 Min.

-20

-20 Min.

-20

-20 Min.

-20 Min.

-20 Min.

-20 Min.

-20 Typ.

-70.0

-91.0

Typ.

-66.0

-90.0

Typ.

-63.0

-90.0

Typ.

-59.0

-90.0

Typ.

-58.0

-89.0

Typ.

-55.0

-86.0

Max. Unit

dBm

dBm dBm dBm Max. Unit

dBm

dBm dBm dBm Max. Unit

dBm

dBm dBm Max. Unit

dBm

dBm dBm Max. Unit

dBm

dBm dBm Max. Unit

dBm

dBm dBm BLUETOOTH SPECIFICATIONS Parameter Conditions Min. Typ. Max Unit Basic Rate (Normal Power Mode) Frequency Range Sensitivity (BER) Maximum Input Level EDR (Normal Power Mode) EDR Sensitivity (BER) BLE BLE Sensitivity (PER) BER 0.1%

BER 0.1%

/4-DQPSK BER 0.01%

8DPSK BER 0.01%

PER 30.8%@1MBPS PER 30.8%@2MBPS BLE Maximum Input Level Basic Rate (High Power Mode) Frequency Range Sensitivity (BER) Maximum Input Level EDR (High Power Mode) EDR Sensitivity (BER) BER 0.1%

BER 0.1%

/4-DQPSK BER 0.01%

8DPSK BER 0.01%

2402 2480

-17

-91.0

-93.0

-87.0 MHz dBm dBm dBm dBm

-94.5 dBm

-91.5

-91.0

-93.0

-87.0 2402

-17 dBm 2480

-17 MHz dBm dBm dBm dBm Page 18 of 28 ANTENNA SPECIFICATIONS Antenna 1: Flex PCB Antenna , Part no: 1001932PT Page 19 of 28 Page 20 of 28 Page 21 of 28 Antenna 2: Omni Directional Dipole antenna , Part no: MAF94367 Module to be used with Antenna part no: MAF94367, Make: Laird Technologies Honeywell part no: 805-833-001 Page 22 of 28 Antenna 3: Flex PCB antenna , Part no: FPA3020-10 Page 23 of 28 ANTENNA RECOMMENDATIONS This radio transmitter [IC:1693B-PM11AX] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed above, with the maximum permissiblegain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Le prsent metteur radio [IC:1693B-PM11AX] a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types d'antenne numrs cidessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu pour tout type figurant sur la liste, sont trictement interdits pour l'exploitation de l'metteur Page 24 of 28 LAYOUT GUIDELINES Do not run antenna cables directly above or directly below the radio module. Do not run any high-speed digital lines below the radio. Use proper electro-static-discharge (ESD) procedures when installing the HWBPM11AX-PRTM module. Use non-conductive labels and to be pasted over the EMI shield provided on the module. Page 25 of 28 AGENCY APPROVALS FCC ID: HD5-PM11AX Model Name: HWBPM11AX-PRTM This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy. However, there is no guarantee that interference will not occur in a installation. If this equipment does cause harmful interference to radio or reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that my cause undesired operation. Caution:

MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the users authority to operate the device. INSTALL & OPERATION: The equipment should be installed and operated with minimum distance 20cm between the radiator & your body Page 26 of 28 Industry Canada Model: HWBPM11AX-PRTM IC: 1693B-PM11AX This device complies with Industry Canada RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Leprsent appareil est conforme aux CNR d'Industrie Canada applicable aux appareils radio Exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement."

Cet quipement doit tre install et utilis avec une distance minimale de 20cm entre le radiateur et votre corps. Note:

Within the 5.15 to 5.25 GHz band, UNII devices will be restricted to indoor operations only. Dans la bande de 5,15 5,25 GHz, les appareils UNII seront restreints aux oprations intrieures. Page 27 of 28 LABELLING GUIDELINES FOR PRODUCT The proposed FCC IC label format is to be placed on the module. If it is not visible when the module is installed into the system, Contains FCC ID: HD5-PM11AX, Contains IC:1693B-PM11AX shall be placed on the outside of final host system. tiquetage le format propos de l'tiquette IC de fac doit tre plac sur le module.Si le module n'est pas visible lorsqu'il est install dans le systme, contenant l'ID FCC ID: HD5-PM11AX, contenant l'IC: 1693B-PM11AX doit tre plac l'extrieur du systme hte final. Page 28 of 28

HONEYWELL INTERNATIONAL INC SAFETY AND PROUDCTIVITY SOLUTIONS 9680 Old Bailes Road, Fort Mill, SC 29707, USA Labelling Information FCC ID: HD5-PM11AX IC: 1693B-PM11AX Model Name: HWBPM11ACX-PRTM Picture below shows the label location on HWBPM11AX-PRTM MODULE and the label Information. Picture 1: Sample picture for Labelling 1.0: Details:

Picture 2: Label Drawing 1.1 The permanent Label is affixed on HWBPM11AX-PRTM WIFI & BT Module same as above pictures. 1.2 The Material for Label is non-conductive and non-tearable, with below Key features. High Temperature resistance (up to 300C) ANSI Grade A barcode readability High Solvent resistance Anti-yellowing property No edge-liftying. The Font size is readable and legible. Below are the details of the Font. Font: ARIAL (Font size: 4 pt.) Revision:1.0 Page 1 of 1

Safety and Productivity Solutions 9680 Old Bailes Road, Fort Mill, SC 29707, USA www.honeywell.com www.honeywellaidc.com Authority to Act as Agent Date: 19-Jan-2023 TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern:

I appoint Raghavendra Kulkarni, TUV Rhienland India Pvt Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with _Salahshour, Mandana, HONEYWELL INTERNATION INC, 9680 Old Bailes Road, Fort Mill, South Carolina For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC be nefits. Thank you, Agency Agreement Date:

19-Jan-2023 Agreement is valid for 12 months from the above date. By:

(Signature) Salahshour, Mandana

(Print name) Quality Control Manager

(Title)

+1 (803) 835-8000

(Telephone) On behalf of:

(Company Name) HONEYWELL INTERNATION INC

DATASHEET Part No. 1001932PT Product: PCB WiFi Tunable Embedded Antenna with Cable Part No. 1001932PT WLAN / BT / Zigbee Tunable Embedded PCB Antenna 2.4 GHz, 5 GHz Supports: Wi-Fi applications, Agriculture, Automotive, Bluetooth, Zigbee, WLAN, Smart Home, Healthcare, Digital Signage Ethertronics WLAN antennas deliver on the key needs of device designers for higher functionality and performance in smaller/thinner designs. These innovative antennas provide compelling advantages for a 2.4 GHz and 5.0 GHz enabled devices. Real-World Performance and Implementation Antennas may look alike on the outside, but the important difference is inside. Other antennas may contain simple PIFA or monopole designs that interact with their surroundings, complicating layout or changing performance with use position. Ethertronics antennas utilize patented Isolated Magnetic Dipole (IMD) technology to deliver a unique size and performance combination. Electrical Specifications Typical Performance using 100 mm cable tested on PC-ABS PCB WiFi Tunable Embedded Antenna with Cable 2.4 GHz; 5 GHz Frequency 2.400 2.485 GHz 5.150 5.825 GHz KEY BENEFITS Stay-in-Tune Ethertronics antenna technology provides superior RF field containment, resulting in less interaction with surrounding components. Quicker Time-to-Market By optimizing antenna size, performance and emissions, customer and regulatory specifications are more easily met. Reliability Products are the latest RoHS version compliant. APPLICATIONS Embedded design Cellular, Headsets, Tablets Gateway, Access Point Handheld Telematics Tracking Healthcare M2M, Industrial devices Smart Grid OBD-II Peak Gain Average Efficiency 2.5 dBi 60%

4.4 dBi 71%

VSWR Match 2.0 :1 max Feed Point Impedance 50 ohms unbalanced Polarization Power Handling Linear 0.5 Watt CW Mechanical Specifications & Ordering Part Number Ordering Part #

1001932PT-AA10L0100 1001932PT-AC10L0100 Dimensions (mm) 35.2 x 8.5 x 0.9

(Height up to 1.80 mm at soldering point) Weight (grams) 0.8 0.8 Cable/Connector Length: 100 Diameter: 1.13 Color: Black Connector: u.Fl compatible Length: 100 Diameter: 1.13 Color: Black Connector: MHF4L Mounting Adhesive on bottom side of antenna Packaging PE bags

*Additional variations available with different cable lengths, colors and connectors. 05/10/2018 Proprietary www.ethertronics.com DATASHEET | Part No. 1001932PT 2.4 / 5 GHz Ethertronics PCB Embedded Antenna Specifications Ethertronics produces a wide variety of standard and custom antennas to meet user needs. VSWR, Efficiency and Peak Gain Plots Typical Performance using 100 mm cable tested on PC-ABS 2.4 GHz VSWR 5 GHz VSWR 2.4 GHz Efficiency 5 GHz Efficiency 2.4 GHz Peak Gain 5 GHz Peak Gain 2018 Ethertronics tel +(1) 858.550.3820 | fax +(1) 858.550.3821 email: info@ethertronics.com 5501 Oberlin Drive, Suite 100 San Diego, CA 92121 - USA DATASHEET | Part No. 1001932PT 2.4 / 5 GHz Ethertronics PCB Embedded Antenna Specifications Ethertronics produces a wide variety of standard and custom antennas to meet user needs. Antenna Radiation Patterns Typical Performance using 100 mm cable tested on PC-ABS Measured @ 2440, 5450 MHz Z X Y Y Y Z Z z H M 0 4 4 2 t a d e r u s a e M z H M 0 5 4 5 t a d e r u s a e M X X Z Z Y Y X X 2018 Ethertronics tel +(1) 858.550.3820 | fax +(1) 858.550.3821 email: info@ethertronics.com 5501 Oberlin Drive, Suite 100 San Diego, CA 92121 - USA DATASHEET | Part No. 1001932PT 2.4 / 5 GHz Ethertronics PCB Embedded Antenna Specifications Ethertronics produces a wide variety of standard and custom antennas to meet user needs. Antenna Tuning Options Typical Performance using 100 mm cable tested on PC-ABS

*This antenna has unique features enabling limited range RF tuning by leaving P1 - P6 and C1 - C2 connected by solder bridge or disconnected with a cut to the trace. Refer to detailed tuning options below. Ref: Baseline = Typical Performance using 100 mm cable tested on PC-ABS Options for Tuning: "2.4GHz (Lower)"

MODE PADS Outcome:

(Ref: Baseline) T1 Connect: P2

~200 MHz shift low T2 Connect: P1

~250 MHz shift low T3 T4 Connect: P2+P3 Connect: P1+P3

~350 MHz shift low

~370 MHz shift low Options for Tuning: "2.4GHz (Higher)"

MODE PADS Outcome:

(Ref: Baseline) C1 Cut: C1

~170 MHz shift high C2 Cut: C2

~300 MHz shift high Options for Tuning: "5GHz (Lower)"

MODE PADS Outcome:

(Ref: Baseline) T5 Connect: P4

~200 MHz shift low T6 Connect: P4+P5

~1500 MHz shift low T7 Connect: P6

~500 MHz shift low T8 Connect: P5+P6

~1900 MHz shift low 2018 Ethertronics tel +(1) 858.550.3820 | fax +(1) 858.550.3821 email: info@ethertronics.com 5501 Oberlin Drive, Suite 100 San Diego, CA 92121 - USA DATASHEET | Part No. 1001932PT 2.4 / 5 GHz Ethertronics PCB Embedded Antenna Specifications Ethertronics produces a wide variety of standard and custom antennas to meet user needs. Mechanical Dimensions Typical antenna dimensions (mm) Part Number A (mm) B (mm) C (mm) D (mm) E(mm) Connector 1001932PT-AA10L0100 35.2 0.3 8.5 0.3 1.8 (max) 100 3.0 2.05 u.FL compatible 1001932PT-AC10L0100 35.2 0.3 8.5 0.3 1.8 (max) 100 3.0 1.15 MHF4L

*Total Height C measures 1.8 mm includes the cable solder connection + PCB + adhesive thicknesses A A D Top View Top View B E C Side View

(Adhesive) Bottom View 2018 Ethertronics tel +(1) 858.550.3820 | fax +(1) 858.550.3821 email: info@ethertronics.com 5501 Oberlin Drive, Suite 100 San Diego, CA 92121 - USA

Address : Dngguan Primax Electronic & Telecommunication Products Ltd. # 135, KEJI EAST ROAD, SHIJIE TOWN, DONGGUAN CITY, GUANGDONG PROVINCE, CHINA Tel:86-0769-8229-3666, Email ID : CBD@primax.com.tw

Laird Technologies (m) Sdn. Bhd. Laird Technologies (m) Sdn. Bhd. Plot 522Lorong Perusahaan Baru 3, Prai Industrial Estate, 13600, Perai, Malaysia, 13600 Perai, Penang, Malaysia, Phone: +60 4-398 9298 Plot 522Lorong Perusahaan Baru 3, Prai Industrial Estate, 13600, Perai, Malaysia, 13600 Perai, Penang, Malaysia, Phone: +60 4-398 9298 Laird Technologies (m) Sdn. Bhd. Plot 522Lorong Perusahaan Baru 3, Prai Industrial Estate, 13600, Perai, Malaysia, 13600 Perai, Penang, Malaysia, Phone: +60 4-398 9298

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com sps.honeywell.com Date: 18/01/2023 Subject: Confidentiality Request for FCC ID: HD5-PM11AX Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term Permanent External Photos Short Term Permanent Internal Photos Short Term Permanent Bill of Material Short Term Permanent Operation Description/Theory of Operation

/NII software security attestation Short Term Permanent Part List/Tune-Up Procedure Short Term Permanent Schematics for Host & Module Short Term Permanent Test Setup Photos Short Term Permanent Users Manual Honeywell International Inc has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, Mandana Salahshour Mandana.Mobasher@honeywell.com Manager Regulatory Compliance Honeywell International Inc SPS (Safety and Productivity Solutions) Office:+1-803-835-8190

Safety and Productivity Solutions 9680 Old Bailes Road, Fort Mill, SC 29707, USA www.honeywell.com www.honeywellaidc.com Certification Designating a U.S. Agent for Service of Process Date: 02-10-2023 Ref: Section 2.911(d) (7) filing FCC ID: HD5-PM11AX To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Honeywell International Inc. (the applicant) as required by section 2.911(d) (7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. Contact Person: Salahshour, Mandana Company Name: Honeywell International Inc Company Address: 9680 Old Bailes Road, Fort Mill, SC 29707, USA Phone No.: +1 803-835-8190 Email: Mandana.mobasher@honeywell.com Sincerely yours, Contact Person: Salahshour, Mandana Company Name: Honeywell International Inc Company Address: 9680 Old Bailes Road, Fort Mill, SC 29707, USA Email: Mandana.mobasher@honeywell.com

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6369068.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com sps.honeywell.com Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: 02-08-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) & Section 2.911(d)(7) filing FCC ID: HD5-PM11AX Honeywell International Inc (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. The equipment for which authorization is sought is not covered telecommunications equipment and video surveillance equipment produced by entities identified on the Commissions Covered List that prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Honeywell International Inc (the applicant) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicants agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. FCC US Agent Company Name: Honeywell International Inc Contact Name: Mandana Salahshour (Mobasher) Address: 9680 Old Bailes Road, Fort Mill SC 29707 Phone No.: +1 803-835-8190 Email Address: Mandana.mobasher@honeywell.com FCC FRN (optional): 0017363995 Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com Sincerely yours, Mandana Salahshour Mandana.Mobasher@honeywell.com Manager Regulatory Compliance Honeywell International Inc SPS (Safety and Productivity Solutions) Office:+1-803-835-8190

Safety and Productivity Solutions 9680 Old Bailes Road, Fort Mill, SC 29707, USA www.honeywell.com www.honeywellaidc.com HONEYWELL INTERNATIONAL INC Applicant HD5-PM11AX FCC ID:

Section 15.212 Modular Transmitters Request for Single Modular Approval Yes Request for Limited Modular Approval No SL. No Requirement EUT Condition Comply

(Yes/No) 1 2 3 4 The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-

modulation The modular transmitter must have its own power supply regulation The modular transmitter must comply with the antenna and transmission system requirements of 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). The professional installation provision of 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section The Radio elements including transmitter is enclosed inside the shield. Tuning capacitors and passive filters are located outside the shield. Also, Tuning capacitor and passive filters are located on the module Assembly only. The communication to the radio uses digital technology. The communication buffering eliminates the ability to over-

modulate the radio under all conditions. The Module has on-chip voltage regulation for 1.1VDC & 3.3VDC. Also, there is an on-board regulation for 5VDC Input. There is no onboard antenna on the module. The RF Trace from the chipset gets connected to the antenna terminals using 50 ohms matching trace. The Antenna terminals are specially designed so that it gets fixed to host board. Its a custom designed antenna with special connector (RP-SMA & U.FL connectors) Yes Yes Yes Yes Safety and Productivity Solutions 9680 Old Bailes Road, Fort Mill, SC 29707, USA www.honeywell.com www.honeywellaidc.com The modular transmitter must be tested in a stand-

alone configuration, i.e., the module must not be inside another device during testing for compliance with part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see 15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see 15.31(i)) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number 5 6 The module was not kept inside any enclosure or within any equipment. It was interfaced with Host board for Testing and the board was exposed for all the tests. There were no additional ferrites used for any cables connected to Module or host board. The Module was interfaced to Host board via Connector 30pin connector. There were no cables in between Host board and Module. There was no accessories, peripherals or support equipment connected to the module. Yes. The Label is affixed on the Module displaying the FCC ID HD5-

PM11AX Yes A full modular approval may be granted for single or split modular transmitters that do not comply with all of the above requirements, e.g., shielding, minimu m signaling amplitude, buffered modulation/data inputs, or power supply regulation, if the manufacturer can demonstrate by alternative means in the application for equipment authorization that the modular transmitter meets all the applicable Part 15 requirements under the operating conditions in which the transmitter will be used. Limited modular approval also may be granted in those instances where compliance with RF exposure rules is demonstrated only for particular product configurations. The applicant for certification must state how control of the end product into which the module will be installed will be maintained such that full compliance of the end product is always ensured Sincerely, Salahshour, Mandana mandana.salahshour@honeywell.com Quality Control Manager Honeywell International Inc SPS (Safety and Productivity Solutions) Office: +1-803-835-8275

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6369114.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com sps.honeywell.com Date: January 18, 2023 Federal Communications Commission Authorization and Evaluation division Subject: Statement of Conformity for the product HWBPM11AX-PRTM Module with FCC ID: HD5-PM11AX HWBPM11AX-PRTM Module complies with Part 15 of FCC rules. We declare that:

1. HWBPM11AX-PRTM software and associated drivers will not initiate any transmission on DFS frequency without initiation by master. 2. HWBPM11AX-PRTM adopts passive scanning without any beacons and does not support peer-to-peer modes Sincerely, Mandana Salahshour Mandana.Mobasher@honeywell.com Manager Regulatory Compliance Honeywell International Inc SPS (Safety and Productivity Solutions) Office:+1-803-835-8190