IF2 Network Reader and IM14 Radio, 900 MHz Compliance Insert Model IF2 Retain This Supplement/General Warning Product documentation is available at www.honeywellaidc.com. Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future reference. The users of this product are cautioned to use accessories and peripherals approved by Honeywell International Inc. The use of accessories other than those recommended, or changes to this product that are not approved by Honeywell, may void the compliance of this product and may result in the loss of the users authority to operate the equipment. Power Supply Information Caution: Use only UL Listed power supply, which has been qualified with output rated at 12 VDC and 2.5 A with the device. Alternatively, this product may be powered by a Power-Over-Ethernet network compliant with IEEE 802.3at. If using POE users are cautioned to select a POE power source which complies with all of the safety and EMC regulations in the country of use. Additionally, when using POE, the POE network must be confined to a single building. No user-serviceable parts.
/
Honeywell 7 Honeywell UL 12 VDC 2.5 A IEEE 802.3at POE POE POE Conservez ce supplment/Mise en garde gnrale La documentation sur le produit est disponible www.honeywellaidc.com. Attention: Ce marquage indique que lusager doit, avant lutilisation, lire toute la documentation incluse. Conservez ce supplment pour rfrence future. Utilisateurs de ce produit sont aviss dutiliser des accessoires et des priphriques approuvs par Honeywell International Inc. Lutilisation daccessoires autres que ceux recommands ou des changements ce produit qui ne sont pas approuvs par Honeywell peuvent annuler la conformit de ce produit et mettre fin au droit qua lusager dutiliser lquipement. Information sur lAlimentation Attention: Utilisez avec lappareil uniquement un bloc dalimentation homologu UL avec une sortie nominale de 12 V CC et 2.5 A. Alternativement, ce produit peut tre aliment par un rseau Power-Over-Ethernet conforme la norme IEEE 802.3. Si vous utilisez POE les utilisateurs sont informs de choisir une source d'alimentation POE, qui est conforme toutes les rglementations de scurit et EMC dans le pays dutilisation. De plus, lorsque le POE (Power over Ethernet ou alimentation lectrique par cble Ethernet) est utilis, le rseau POE doit tre confin un seul btiment. Il ne contient aucune pice rparable par lutilisateur. Manter este aviso complementar/geral A documentao do produto est disponvel em www.honeywellaidc.com. Cuidado: Esta identificao indica que o usurio deve ler toda a documentao fornecida antes de usar o produto. Os usurios deste produto devem usar acessrios e perifricos aprovados pela Honeywell International Inc. Usar acessrios no recomendados, ou fazer alteraes neste produto no aprovadas pela Honeywell, poder anular a conformidade deste produto e resultar na perda da permisso do usurio de utilizar o equipamento. Informaes da fonte de alimentao 1 Cuidado: Use apenas a fonte de alimentao listada como UL (Underwriters Laboratories) que tenha sido qualificada com sada nominal de 12 VCC e 2.5 ampres com o dispositivo. Alternativamente, este produto pode ser alimentado por uma rede Power-Over-
Ethernet compatvel com IEEE 802.3at. Se estiverem utilizando POE, os usurios sero aconselhados a selecionar uma fonte de alimentao POE em conformidade com todos os regulamentos de segurana e EMC no pas de uso. Alm disso, quando usa o POE
(Power over Ethernet), a rede POE dever ser confinada a um nico edifcio. Este equipamento no contm peas que possam ser reparadas pelo usurio. Retenga este suplemento/advertencia general La documentacin del producto est disponible en www.honeywellaidc.com. Precaucin: Esta marca indica que el usuario debe leer toda la documentacin incluida antes del uso. Retenga este suplemento para referencia futura. Se advierte a los usuarios de este producto que usen accesorios y perifricos aprobados por Honeywell International Inc. El uso de accesorios aparte de los recomendados, o los cambios a este producto que no estn aprobados por Honeywell, pueden anular el cumplimiento de este producto y ocasionar la prdida de la autorizacin del usuario para operar el equipo. Informacin cargador de alimentacin Precaucin: Utilice solo una fuente de alimentacin con certificacin UL, homologada con una potencia de salida de 12 V CC y 2.5 amperios con el dispositivo. Alternativamente, este producto puede alimentarse mediante una red de energa por Ethernet (Power-
Over-Ethernet, POE) que cumpla con la norma IEEE 802.3at. Si se usa POE, se advierte a los usuarios que seleccionen una fuente de alimentacin POE que cumpla con todas las reglas de seguridad y de EMC del pas donde se utilice. Adems, al usar POE (Power over Ethernet), la red POE debe limitarse a un solo edificio. No hay piezas a las cuales pueda dar servicio el usuario. For Users Within North and South America This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause undesired operation. Caution: FCC Compliance RFID systems require professional installation. Antennas: The users of this product are cautioned to use antennas and accessories approved by Honeywell. The use of antennas and accessories that are not approved by Honeywell may void the compliance of this product and may result in the loss of the users authority to operate the equipment. FCC Digital Emissions Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the radio or television receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected. Consult the dealer or an experienced radio television technician for help. Canadian Digital Apparatus Compliance This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Radiation Exposure Statement Increase the separation between the computer equipment and receiver. Warning: This equipment complies with International Commission on Non-Ionizing Radiation Protection (ICNIRP), IEEE C95.1, Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65, Canada RSS-102, and CENELEC limits for exposure to radio frequency (RF) radiation. When installing and using this product, a 34 cm (13.4 in.) passing distance must be maintained from the body or head of the user or nearby persons and the antenna. The antenna must not be touched during transmitter operation. Use of antennas and accessories not authorized may void the compliance of this product and may result in RF exposures beyond the limits established for this equipment. This product is intended for business and industrial environments and should not be used by children. lattention des utilisateurs en Amrique du Nord et du Sud Ce dispositif est conforme la partie 15 des rglements du FCC et la norme RSS-210 dIndustrie Canada. Lutilisation est assujettie aux deux conditions suivantes: (1) Ce dispositif ne doit pas causer dinterfrence dommageable et (2) Ce dispositif doit tolrer toute interfrence, incluant linterfrence pouvant causer un fonctionnement indsirable. Conformit aux normes canadiennes sur les appareils numriques Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. nonc sur lexposition aux radiations 2 Avertissement : Cet quipement est conforme aux limites dexposition au rayonnement des radiofrquences (RF) de la Commission internationale de protection contre les rayonnements non ionisants (ICNIRP), IEEE C95.1, du bulletin 65 de la Federal Communications Commission Office of Engineering and Technology (OET), de la norme RSS-102 du Canada et du Comit Europen de Normalisation Electrotechnique (CENELEC). Lors de linstallation et de lutilisation de ce produit, une distance de passage de 34 cm (13,4 po) doit tre respecte depuis le corps ou la tte de lutilisateur ou de personnes proches et lantenne. Il ne faut pas toucher lantenne durant le fonctionnement du transmetteur. Lutilisation dantennes et daccessoires non agrs peut annuler la conformit de ce produit et entraner une exposition aux RF-del des limites tablies pour cet quipement. Ce produit est destin aux environnements commerciaux et industriels et ne doit en aucun cas tre utilis par des enfants. Para usurios das Amricas do Norte e do Sul Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. Informaes sobre exposio radiao RF Ateno: Este equipamento est em conformidade com os limites da International Commission on Non-Ionizing Radiation Protection (ICNIRP), da IEEE C95.1, da Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65, da Canada RSS-102 e da CENELEC para exposio radiofrequncia (RF). Ao instalar e utilizar o mdulo de rdio deixe uma distncia de 34 cm (13,4 polegadas) entre a cabea ou o corpo do usurio ou das pessoas prximas e da antena. A antena no deve ser tocada quando o transmissor estiver em uso. O uso de antenas e acessrios no autorizados pode anular a conformidade deste produto e pode resultar em exposio a nveis de radiofrequncia superiores aos limites estabelecidos para este equipamento. Este produto foi desenvolvido para uso em ambientes industriais e comerciais e no devem ser usados por crianas. Para usurios dentro de Amricas del Norte y del Sur Precaucin: Los sistemas, dispositivos o productos que utilicen las bandas de frecuencias del espectro radioelctrico de uso libre materia del presente Acuerdo, no debern provocar interferencias perjudiciales a equipos de usuarios que cuenten con permiso o concesin, en cuyo caso debern cesar su operacin hasta que se eliminen las mismas. Asimismo, no tendrn proteccin contra interferencias provenientes de dichos equipos o de otros que se encuentren debidamente homologados. Declaracin sobre exposicin a la radiacin Advertencia: Este equipo cumple con los lmites de la Comisin Internacional de Proteccin contra la Radiacin No Ionizante
(ICNIRP), IEEE C95.1, la Oficina de Ingeniera y Tecnologa de la Comisin Federal de Comunicaciones (OET) [Boletn 65], Canad RSS-102, y de CENELEC referentes a la exposicin a la radiacin por radiofrecuencia (RF). Al instalar y usar este producto, debe mantenerse una distancia de paso de 34 cm del cuerpo o la cabeza del usuario o de personas cercanas y la antena. No debe tocarse la antena durante la operacin del transmisor. El uso de antenas y accesorios no autorizados puede anular el cumplimiento de este producto y puede causar exposiciones de RF que superan los lmites establecidos para este equipo. Este producto est destinado a ambientes de negocios e industriales y no deben usarlo los nios. Approved Antenna List This device has been designed to operate with the antennas listed in the next table. Each of these antennas has a maximum effective gain
(antenna gain minus cable loss) of 6 dB. Antennas not included in this list or having an effective gain (antenna gain minus cable loss) of greater than 6 dB are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. Gain figures are linear dBi (decibels over isotropic). Antenna polarization is described as LP (linear polarized), CP (circular polarized), LCP (left circular polarized), or RCP (right circular polarized). Liste dantennes approuves Cet appareil a t conu pour fonctionner avec les antennes listes au tableau suivant. Ces antennes ont un gain apparent maximal de 6 dB
(gain de lantenne moins la perte du cble). Il est strictement prohib dutiliser avec cet appareil les antennes qui ne sont pas sur cette liste ou celles ayant un gain apparent de plus de 6 dB (gain de lantenne moins la perte du cble). Limpdance requise pour lantenne est de 50 ohms. Afin de rduire le risque de perturbation radiolectrique pour les autres utilisateurs, le type et le gain de lantenne doivent tre choisis de manire ce que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas ce qui est ncessaire pour tablir la communication. Les valeurs de gains sont dBi linaires (dcibels isotropes). La polarisation de lantenne est dcrite comme tant PL (polarisation linaire), PC
(polarisation circulaire), PCG (polarisation circulaire gauche) ou PCD (polarisation circulaire droite). Approved Antenna List - Liste dantennes approuvees P/N N/P M/N, Supplier P/N N/M, Fournisseur N/P 805-859-001 IA40A, Laird PAR86518H-HN1 805-609-001 IA33A, Cushcraft SP9028PC156RSM 805-623-002 IA39D, Kathrein 25-278 805-626-001 IA36B, Kathrein 25-578 805-629-001 IA33c, Mobile Mark PN10-
915RCPI Description Description Panel RCP Patch RCP Patch LCP Patch, Linear Panel RCP Gain (dBi)*
Gain (dBi)*
Cable Loss (dB) Perte du cable (dB) System Gain (dBi) Gain du systme
(dBi) 5.5 4.0 5.0 6.0 7.0 2.4 0 2.4 2.4 2.4 3.1 4.0 2.6 3.6 4.6 3 Approved Antenna List - Liste dantennes approuvees (continued) P/N N/P M/N, Supplier P/N N/M, Fournisseur N/P Description Description Gain (dBi)*
Gain (dBi)*
Cable Loss (dB) Perte du cable (dB) System Gain (dBi) Gain du systme
(dBi) 805-654-001 IA33G, Huber Suhner 84024995 Panel RCP 805-654-002 IA33A, Huber Suhner 84024996 Panel LCP 805-655-001 IA33H, Huber Suhner 84024999 Panel RCP 805-655-002 IA34B, Huber Suhner 84025000 Panel LCP 805-816-002 IA33E, Cushcraft S9026XR1RRN Patch RCP
-
-
-
-
-
-
-
-
-
-
-
-
-
-
!
!
Panel, Linear
-, MTI MT-242044/N/K Panel, Linear
-, Huber Suhner 1309.17.0085-X
-, Huber Suhner 1309.17.0089-X Panel RCP
-, Huber Suhner 1309-56-0001-X Panel RCP
-, Huber Suhner 1309-57-0087-X Panel RCP Panel RCP
-, Mobile Mark PN7-915I-FL Panel RCP
-, Mobile Mark EDN 191-1550 Panel RCP
-, Kathrein 520 10087
-, Kathrein 520 10073 Panel RCP Patch CP
-, Kathrein 520 10092 7 ft. Multi-Axis
-, NeWave Wave-N7 Dipole 5 ft. Multi-Axis Dipole 3 ft. Multi-Axis Dipole Panel RCP Panel RCP Panel, Linear Panel, Linear
-, Mobile Mark BP6-915RCPI
-, Laird S9025P
-, Laird PA9-12
-, MTI MT-263006/S/E
-, NeWave Wave-N5
-, NeWave Wave-N3 5.5 5.5 7.0 7.0 3.0 8.0 8.0 4.5 8.0 7.0 4.0 4.0 7.5 5.2
-30.0 5.5 4.5 3.0 2.5 2.5 12.0 12.5 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 3.1 3.1 4.6 4.6 0.6 5.6 5.6 2.1 5.6 4.6 1.6 1.6 5.1 2.8
-32.4 3.1 2.1 0.6 0.1 0.1 9.6 10.1
* Gain, dBi + 3 = dBiC, Circular Polarized antenna gain (gain Polarisee Circulaire dantenne)
-X = quantity price code (code des prix de quantite)
! = High Gain Antenna - Professional Installation Required. Operation only with Field Strength 26dBm CP = Circular Polarized RCP = Right Hand Circular Polarized LCP = Left Hand Circular Polarized For Users Outside of North and South America The users of this product are cautioned to use accessories and peripherals approved by Honeywell. The use of accessories other than those recommended, or changes to this product that are not approved by Honeywell, may void the compliance of this product and may result in the loss of the users authority to operate the equipment. For use in China, the effective radiated power (ERP) shall not exceed 33 dBm ERP. The installer will be required to adjust the power output of the IF2 down if using antennas with gain above 7.5 dBiL and RF cables with 2.4 dB minimum loss. Radiation Exposure Statement This product meets the RF exposure guidelines when used with the accessories supplied or designated for this product. Use of other accessories may not ensure compliance with RF exposure guidelines. Warning: This equipment complies with International Commission on Non-Ionizing Radiation Protection (ICNIRP), IEEE C95.1, Federal Communications Commission Office of Engineering and Technology (OET) Bulletin 65, Canada RSS-102, and CENELEC limits for exposure to radio frequency (RF) radiation. When installing and using this product, a 34 cm (13.4 in.) passing distance must be maintained from the body or head of the user or nearby persons and the antenna. The antenna must not be touched during transmitter operation. Use of antennas and accessories not authorized may void the compliance of this product and may result in RF exposures beyond the limits established for this equipment. This product is intended for business and industrial environments and should not be used by children. Honeywell Honeywell
(ERP) 33 dBm ERP 7.5 dBiL 2.4 dB Honeywell RF IF2 RF 4
(ICNIRP)IEEE C95.1 (OET) Bulletin 65 RSS-102 CENELEC (RF) 34 13.4 RF 5
(Pb)
(Hg)
(Cd) X O O
(Cr6+) O
(PBB)
(PBDE) O O SJ/T 11364 O: GB/T 26572 X: GB/T 26572 5 6 7 Honeywell International Inc. 9680 Old Bailes Road Fort Mill, SC 29707 USA IF2 Network Reader and IM14 Radio, 900 MHz Compliance Insert
*933-248-003*
P/N 933-248-004-AG Revision (a)