FCC ID: HD5-CT40PL0N Mobile Computer

CT40 Series powered by Android Quick Start Guide CT40-A-EN-QS-01 Rev E 06/20 Out of the Box Make sure that your shipping box contains these items:

Mobile Computer Model CT40-L0N, CT40-L1N, CT40P-L0N, or CT40P-L1N Rechargeable Li-ion battery (see page 7) Hand strap Product documentation If you ordered accessories for your mobile computer, verify that they are also included with the order. Be sure to keep the original packaging in case you need to return the mobile computer for service. Note: CT40-L0N/CT40P-L0N models do not include a WWAN radio. Memory Card Specifications Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD or microSDHC memory cards with mobile computers for maximum performance and durability. Contact a Honeywell sales representative for additional information on qualified memory card options. 1 Mobile Computer Features Imager Window

(LED/Laser Aperture) Speaker Scan Status LED Battery Status/

Notification LED Touch Panel Scan Button Speaker Microphone Front Facing Camera

(model dependent) Power Button Push-to-Talk Button

(model dependent) Scan Button Microphone 2 Note: Hand strap not shown. Laser Safety Label Location BLE Speaker Out

(model dependent) SIM Card Door MicroSD Card Door Camera Lens and Flash BLE port In

(model dependet) Volume Button Scan Button USB, Type C

(model dependent) Audio Jack Pin

(model dependent) I/O Connector 3 Battery Latch (Model CT40-xxx-xxxxx0x) Battery Latch (Models CT40-L0N-xxxxxAx, CT40-xxx-xxxxxBx, CT40-xxx-xxxxxHx, CT40P-L0N-xxxxxAx, CT40P-xxx-xxxxxBx, CT40P-xxx-xxxxxHx) Battery

(Refer to page 7) 4 Install a microSD Card (Optional) Note: Format the microSD card before initial use. 3 1 4 2 5 Note: Always power off the computer before attempting to install or remove a card. 5 Install a microSIM Card Note: Phone feature is only available on CT40-L1N/CT40P-L1N models. On all models, the SIM slot supports use of a UICC card for NFC Secure Element NFC link encryption. 3 1 4 2 5 Note: Always power off the computer before attempting to install or remove a card. 6 About the Battery The mobile computer ships with a Li-ion battery manufactured for Honeywell International Inc. Model Configuration Battery P/N Power CT40-xxx-xxxxx0x 318-005-011 3.8 VDC, 15.5 watt-hour CT40-xxx-xxxxxHx 318-055-017 3.8 VDC, 15.5 watt-hour CT40-LON-xxxxxAx 318-055-015 3.85 VDC, 15.5 watt-hour CT40-xxx-xxxxxBx CT40P-xxx-xxxxxHx TBD 3.85 VDC, 15.5 watt-hour CT40P-L0N-xxxxxAx 318-055-067 3.85 VDC, 15.5 watt-hour CT40P-xxx-xxxxxBx Configuration number (CN) is located on the label in the battery well of the mobile computer. We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. Nous recommandons lutilisation de batteries Li-ion de la marque Honeywell. Lutilisation dune batterie dun autre fabricant est susceptible de provoquer des dommages non couverts par la garantie. Ensure all components are dry prior to placing the battery in the computer. Mating wet components may cause damage not covered by the warranty. Assurez-vous que tous les composants sont secs avant dinsrer la batterie dans lordinateur. Linsertion de composants humides risque de provoquer des dommages non couverts par la garantie. 7 Install Battery (Model CT40-xxx-xxxxx0x) 1 2 3 4 5 8 Install Battery (Models CT40-LON-xxxxxAx, CT40-xxx-xxxxxBx, CT40-xxx-xxxxxHx, CT40P-L0N-xxxxxAx, CT40P-xxx-xxxxxBx, CT40P-xxx-xxxxxHx) 2 1 9 Install the Hand Strap 1 3 2 4 10 Charge the Mobile Computer The mobile computer ships with a partially charged battery. Charge the battery with a CT40 series charging device for a minimum of 4 hours. Using the computer while charging the battery increases the time required to reach a full charge. We recommend the use of Honeywell accessories and power adapters. Use of any non-Honeywell accessories or power adapters may cause damage not covered by the warranty. Nous recommandons dutiliser des accessoires et des adaptateurs secteur de marque Honeywell. Lutilisation de tout accessoire ou adaptateur secteur dune autre marque est susceptible de provoquer des dommages non couverts par la garantie. CT40 series mobile computers are designed for use with the following CT40 charging accessories: HomeBase, Ethernet HomeBase, ChargeBase, NetBase, Quad Battery Charger, Vehicle Power Adapter, Vehicle Dock, and USB Adapter. Ensure all components are dry prior to mating the computers and batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty. Assurez-vous que tous les composants sont secs avant de raccorder les ordinateurs et les batteries des priphriques. Linsertion de composants humides risque de provoquer des dommages non couverts par la garantie. 11 Turn Power On/Off The first time you power on the computer, a Welcome screen appears. You can either scan a configuration barcode or use the Wizard to manually set up the computer. Once setup is complete, the Welcome screen no longer appears on startup and Provisioning mode is automatically turned off (disabled). To turn the computer on:

Press and hold the Power button for approximately 3 seconds, and then release. To turn the computer off:

appears. 2. Touch Power Off. 1. Press and hold the Power button until the options menu Battery Replacement Before removing the battery, always do one of the following:

Power off the computer. Place the unit in Swap Battery mode (feature availability is model dependent). Swap Battery Mode Swap Battery mode places the computer in a low power state so that the battery can be removed for a short time. This feature is not available on all models. To activate Swap Battery mode:

12 1. Press and hold the Power button until the options menu appears. 2. Touch Swap Battery and follow the on-screen instructions. 3. Once you replace the battery, press the Power button. Sleep Mode Sleep mode automatically turns the touch panel display off and locks the computer to save battery power when the computer is inactive for a programmed period of time. 1. Press and release the Power button to wake the computer. 2. Drag the toward the top of the display to unlock the computer. Adjust the Display Sleep Time To adjust the amount of time before the display sleeps after inactivity:

1. Swipe up on the touch screen. 2. Select Settings > Display > Advanced > Sleep. 3. Select the amount of time before the display goes to sleep. 4. Touch to return to the Home screen. 13 About the Home Screen Notification /

Status Bar Home Screen Panel Favorites Tray Search Bar Navigation Buttons 14 To learn how to customize the Home screen, see the user guide. Navigation and Function Buttons Button Description Back Home Return to the previous screen. Return to the Home screen. Recent Apps View and switch between recently used apps. Scan Volume Touch the front (on-screen) Scan button to trigger the scanner. Press the top of the button to raise the speaker volume. Press the bottom of button to lower the speaker volume. Scan Press left or right Scan button to trigger the scanner. Power See page 13. Push-to-Talk Push-to-Talk button is model dependent. For button locations, see Mobile Computer Features on page 2. To learn more about how to re-map a button, see the user guide. 15 About Provisioning Mode After completing the out-of-box set up process, Provisioning mode is automatically turned off. Scanning a barcode to install applications, certificates, configuration files, and licenses on the computer is restricted unless you enable Provisioning mode in the Settings app. To learn more, see the user guide. Scan a Barcode with the Scan Demo For optimum performance, avoid reflections by scanning the barcode at a slight angle. 1. Swipe up on the screen. 2. Select Demos > Scan Demo. 3. Point the computer at the barcode. 4. Touch Scan on the screen or press and hold any Scan button. Center the aiming beam over the barcode. The decode results appear on the screen. Note:

In the Scan Demo app, not all barcode symbologies are enabled by default. If a barcode does not scan, the correct symbology may not be enabled. To learn how to modify the default app settings, see the user guide. 16 Sync Data To move files between your CT40 and a computer:

1. Connect the CT40 to your computer using a USB charge/

communication accessory. 2. On the CT40, swipe down from the top of the screen to see the notifications panel. 3. Touch the Android System notification twice, to open the options menu. 4. Select either File Transfer or PTP. 5. Open the file browser on your computer. 6. Browse to the CT40. You can now copy, delete, and move files or folders between your computer and CT40 as you would with any other storage drive (e.g., cut and paste or drag and drop). Note: When Provisioning mode is turned off, some folders are hidden from view in the file browser. 17 Restart the Mobile Computer You may need to restart the mobile computer to correct conditions where an application stops responding to the system or the computer seems to be locked up. 1. Press and hold the Power button until the options menu appears. 2. Select Restart. To restart the computer if the touch panel display is unresponsive:

Press and hold the Power button for approximately 8 seconds until the computer restarts. Note: To learn about advanced reset options, see the user guide. Support To search our knowledge base for a solution or log into the Technical Support Portal and report a problem, go to www.hsmcontactsupport.com. Documentation Product documentation is available at www.honeywellaidc.com. 18 Limited Warranty For warranty information, go to www.honeywellaidc.com and click Resources > Product Warranty. Patents For patent information, see www.hsmpats.com. Trademarks Android is a trademark of Google LLC. Disclaimer Honeywell International Inc. (HII) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII. HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. Copyright 2018-2020 Honeywell International Inc. All rights reserved. 19 CT40XP-ML-RS-01 Agency Models: CT40P-L0N, CT40P-L1N CT40 XP Mobile Computer Publicly downloadable certificates are available at www.honeywellaidc.com/compliance. Les certificats tlchargeables accessibles au public sont disponibles www.honeywellaidc.com/compliance. Les certificats tlchargeables publiquement sont disponibles sur www.honeywellaidc.com/compliance. I certificati pubblicamente scaricabili sono disponibili sul sito Web www.honeywellaidc.com/compliance. Zertifikate stehen unter www.honeywellaidc.com/compliance ffentlich zum Download zur Verfgung. Hay certificados descargables disponibles pblicamente en www.honeywellaidc.com/compliance. Puede descargar los certificados de acceso pblico en www.honeywellaidc.com/compliance. Certificados disponveis ao pblico para download em:

www.honeywellaidc.com/compliance.

www.honeywellaidc.com/compliance

www.honeywellaidc.com/compliance

www.honeywellaidc.com/compliance

www.honeywellaidc.com/compliance

www.honeywellaidc.com/compliance.

www.honeywellaidc.com/compliance

. Product documentation is available at www.honeywellaidc.com. La documentation sur le produit est disponible www.honeywellaidc.com. La documentation du produit est disponible sur le site www.honeywellaidc.com. La documentazione sul prodotto disponibile sul sito www.honeywellaidc.com. Die Produktdokumentation ist unter www.honeywellaidc.com verfgbar. La documentacin del producto est disponible en www.honeywellaidc.com. La documentacin del producto est disponible en www.honeywellaidc.com. A documentao do produto est disponvel em www.honeywellaidc.com.

www.honeywellaidc.com

www.honeywellaidc.com

www.honeywellaidc.com

www.honeywellaidc.com

www.honeywellaidc.com.

www.honeywellaidc.com

Caution: Any changes or modifications made to this equipment not expressly approved by Honeywell International Inc. may void the authorization to operate this equipment. MISE EN GARDE : Tout changement ou modification apport(e) cet quipement qui n'est pas expressment approuv(e) par Honeywell International Inc. peut annuler l'autorisation d'utiliser cet quipement.

Mise en garde : tous les changements ou les modifications apports cet quipement non expressment approuvs par Honeywell International Inc. peuvent annuler l'autorisation d'utiliser cet quipement. Attenzione: qualsiasi variazione o modifica apportata a questa apparecchiatura, non espressamente approvata da Honeywell International Inc., potrebbe annullare l'autorizzazione concessa all'utente per utilizzare l'apparecchiatura. Vorsicht: Von Honeywell International Inc. nicht ausdrcklich genehmigte Vernderungen an diesem Gert knnen dazu fhren, dass die Betriebsgenehmigung fr dieses Gert erlischt. Precaucin: Cualquier modificacin o cambio realizado en este equipo, no expresamente aprobado por Honeywell

Precaucin: cualquier cambio o modificacin a este equipo que no est expresamente aprobado por Honeywell International Inc. International Inc., puede anular la autorizacin para utilizar este equipo. puede invalidar la autorizacin para usarlo.

Ateno: qualquer alterao ou modificao no aprovada expressamente pela Honeywell International Inc. neste equipamento poder invalidar a autorizao de oper-lo.

Honeywell International Inc.

Honeywell International Inc.

: Honeywell International Inc.

: Honeywell International Inc.

Honeywell

5 89

. 89 5 Honeywell International Inc

International Inc.

For body worn operation, this device has been tested and meets the limits regarding human exposure to electromagnetic radiation set forth in related FCC, IC and CE rules, guidelines and standards for use with the following body worn accessory: holster. Use of other accessories may not ensure compliance with the mentioned rules. Fonctionnement prs du corps: ce dispositif a t test et s'avre conforme aux rgles et lignes directrices des normes FCC, IC et CE, relatives aux limites d'une exposition humaine scuritaire au rayonnement lectromagntique pour une utilisation prs du corps de l'accessoire suivant: holster. L'utilisation d'autres accessoires peut ne pas assurer la conformit avec les rgles mentionnes. 802.11 Caution: A Wireless Network Administrator should review the operating restrictions and use with a properly configured access point.

Models: CT40P-L0N, CT40P-L1N FCC Part 15 Subpart B Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. Honeywell International Inc. is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Honeywell International Inc. The correction is the responsibility of the user. Increase the separation between the equipment and receiver. Use only shielded data cables with this system. Utiliser uniquement des cbles de donnes blinds avec ce systme. Utilisez uniquement des cbles de donnes blinds avec ce systme. Utilizzare solo cavi dati schermati con questo sistema. Fr dieses System nur abgeschirmte Datenkabel verwenden. Utilice slo cables de datos blindados con este sistema. Use nicamente cables protegidos para datos con este sistema. Use somente cabos de dados blindados com este sistema.

. Models: CT40P-L0N, CT40P-L1N Canadian Compliance This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B) / NMB-3 (B) Models: CT40P-L0N, CT40P-L1N Conformit la rglementation canadienne Cet appareil est conforme aux normes RSS avec exemption de licence d'Industrie Canada. Son fonctionnement est assujetti aux conditions suivantes:

1. Cet appareil ne doit pas causer de brouillage prjudiciable. 2. Cet appareil doit pouvoir accepter tout brouillage reu, y compris le brouillage pouvant causer un fonctionnement indsirable. CAN ICES-3 (B) / NMB-3 (B) Models: CT40P-L0N, CT40P-L1N 802.11a Radio Precaution Statements (North America) 802.11a wireless LAN 5150 to 5250 MHz (5.15 to 5.25 GHz) (5 GHz radio channels 36 - 48) is restricted to indoor operations to reduce harmful interference to co-channel Mobile Models: CT40P-L0N, CT40P-L1N 802.11a nonc de mise en garde radio (Amrique du Nord) Mise en garde : 802.11a sans fil LAN 5150 5250 MHz (5,15 5,25 GHz) (frquences radio 36 48 de 5 GHz) est limit aux The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the EIRP limit. The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall comply with the EIRP limits specified for point-to-point and non-point-to-point operation as Satellite System (MSS) operations. appropriate. interference and/or damage to LE-LAN devices. Be advised that high-power radars are allocated as primary users (i.e., priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause Mise en garde : Le gain en puissance dantenne maximal autoris pour les priphriques dans les bandes 5725 5850 MHz doit oprations en intrieur pour rduire les interfrences nuisibles aux oprations du systme mobile par satellite (MSS) dans le mme canal. Mise en garde : Le gain en puissance dantenne maximal autoris pour les priphriques dans les bandes 5250 5350 MHz et 5470 5725 MHz doit respecter la limite EIRP respecter les limites EIRP spcifies pour les oprations point point et non point point le cas chant. Mise en garde : Sachez que les radars de haute puissance sont dsigns comme utilisateurs principaux (c.--d. utilisateurs prioritaires) des bandes 5250 5350 MHz et 5650 5850 MHz, et que ces radars peuvent causer des interfrences ou endommager les priphriques LE-LAN. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. Cet appareil et son antenne ne doivent pas tre situs ou fonctionner en conjonction avec une autre antenne ou un autre metteur, exception faites des radios intgres qui ont t testes. The County Code Selection feature is disabled for products marketed in the US/Canada. La fonction de slection de l'indicatif du pays est dsactive pour les produits commercialiss aux tats-Unis et au Canada. Models: CT40P-L0N, CT40P-L1N Para su uso en Mxico, la operacin de este equipo est sujeta a las siguientes dos condiciones:

1. es posible que este equipo o dispositivo no cause interferencia perjudicial y. 2. este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. Honeywell International Inc. hereby declares that the radio equipment types, non-specific SRD (Models: CT40P-L0N, CT40P-L1N) and cellular (Model:

CT40P-L1N), are in compliance with the following directives:

2014/53/EU Radio Equipment 2011/65/EU RoHS (Recast) The full text of the EU declaration of conformity is available at the following internet address:

www.honeywellaidc.com/compliance. European contact:

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen The Netherlands Honeywell International Inc. dclare par la prsente que les types d'quipement radio, SRD non spcifiques (modles :

CT40P-L0N, CT40P-L1N) et cellulaires

(modle : CT40P-L1N) sont conformes aux directives suivantes :

quipement radio 2014/53/UE 2011/65/UE RoHS (Refonte) Le texte intgral de la dclaration de conformit de l'UE est disponible l'adresse Internet suivante :

www.honeywellaidc.com/compliance. Personne-ressource en Europe :

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen Les Pays-Bas Honeywell International Inc. dclare par la prsente que les types dquipements radiolectriques de faible porte non spcifiques (Modles :

CT40P-L0N, CT40P-L1N) et portables

(Modle : CT40P-L1N) sont conformes aux directives suivantes :

2014/53/UE quipement radio 2011/65/UE RoHS (refonte) Le texte intgral de la dclaration de conformit de lUE est disponible ladresse internet suivante:

www.honeywellaidc.com/compliance. Contact en Europe :

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen Pays-Bas Honeywell International Inc. dichiara che i tipi di apparecchiature radio, SRD

(dispositivi a corto raggio) non specifici (Modelli: CT40P-L0N, CT40P-

L1N) e cellulari (Modello: CT40P-L1N), sono conformi alle seguenti direttive:

2014/53/UE - Apparecchiature radio RoHS 2011/65/UE (rifusione) Il testo completo della Dichiarazione di conformit UE disponibile al seguente indirizzo Internet:

www.honeywellaidc.com/compliance. Contatto in Europa:

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen Paesi Bassi Honeywell International Inc. erklrt hiermit, dass das nicht nher spezifizierte SRD

(Modelle: CT40P-L0N, CT40P-

L1N) bzw. Mobilfunkgert (Modell:

CT40P-L1N) folgende Richtlinien erfllt:

Richtlinie 2014/53/EU

(Funkanlagen) 2011/65/EU RoHS (Recast) Die vollstndige EU-

Konformittserklrung finden Sie im Internet unter: www.honeywellaidc.com/

compliance. Ansprechpartner Europa:

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen Niederlande Honeywell International Inc. declara que los tipos de equipo de radio, dispositivos de corto alcance (SRD) no especficos

(modelos: CT40P-L0N, CT40P-L1N) y mviles (modelo: CT40P-L1N), cumplen con las directivas siguientes:

2014/53/UE sobre equipos de radio 2011/65/UE RoHS (Refundida) El texto completo de la declaracin de conformidad de la UE est disponible en la siguiente direccin de internet:

www.honeywellaidc.com/compliance. Contacto europeo:

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen Pases Bajos Honeywell International Inc. declara que los tipos de equipo de radio, SRD no especficos

(modelos: CT40P-L0N, CT40P-

L1N) y celulares (modelo: CT40P-L1N), son conforme a las siguientes directivas:

Normativa 2014/53/UE sobre equipos radioelctricos 2011/65/UE RoHS (Reformulada) El texto completo de la declaracin de conformidad UE est disponible en la siguiente direccin de internet:

www.honeywellaidc.com/compliance. Contacto europeo:

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen Pases Bajos Por meio deste documento, a Honeywell International Inc. declara que os tipos de equipamento de rdio, sem SRD especfico (modelos: CT40P-L0N, CT40P-L1N) e celular (modelo: CT40P-

L1N), esto em conformidade com as seguintes diretivas:

Equipamento de rdio 2014/53/UE 2011/65/UE RoHS (Reformulao) O texto completo da declarao de conformidade da Unio Europeia est disponvel em www.honeywellaicd.com/

compliance. Contato na Europa:

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen Holanda Honeywell International Inc.

SRD CT40P-L0N, CT40P-

L1N CT40P-

L1N

2014/53/EU

2011/65/EU RoHS

www.honeywellaidc.com/

compliance

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen The Netherlands Honeywell International Inc.

SRD( CT40P-L0N, CT40P-L1N)

( CT40P-L1N)

2014/53/EU

2011/65/EU RoHS

www.honeywellaidc.com/

compliance

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen The Netherlands Honeywell International Inc.

SRD : CT40P-L0N, CT40P-L1N :

CT40P-L1N

2014/53/EU

2011/65/EU RoHS ( ) EU www.honeywellaidc.com/compliance

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen The Netherlands Honeywell International Inc.

, SRD( :

CT40P-L0N, CT40P-L1N) 2014/53/EU 2011/65/EU RoHS (Recast)

( : CT40P-L1N)

. EU www.honeywellaidc.com/

compliance .

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen The Netherlands

& Honeywell International Inc.

( CT40P-L0N, CT40P-L1N) $

($ CT40P-L1N)

2014/53/*+

2011/65/EC RoHS

www.honeywellaidc.com/

compliance. 7 *:

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen The Netherlands Honeywell

International P 8R

) SRD

, CT40P-L0N

CT40P-L1N

:) CT40P-L1N

:5 5

: 8R 2014/53 5

: (5 RoHS 2011/65

: www.honeywellaidc.com/compliance

:5 8R Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen

The equipment is intended for use throughout the European Community. Operating Frequency Ranges Model: CT40P-L0N 13-14 MHz (NFC): -20.53 dB A/m @10m EIRP 2400-2483.5 MHz (PAN Bluetooth): 6.85 dBm EIRP 2400-2483.5 MHz (Bluetooth Low Energy): 2.12 dBm EIRP 2400-2483.5 MHz (WLAN IEEE 802.11b/g/n): 18.83 dBm EIRP 5150-5350 MHz, 5470-5725 MHz and 5725-5850 MHz (WLAN/RLAN IEEE 802.11a/n/ac): 17.68 dBm and 13.92 dBm (5G B4) EIRP Models: CT40P-L1N 13-14 MHz (NFC): -9.24 dBA/m @10m EIRP 2400-2483.5 MHz (PAN Bluetooth): 9.97 dBm EIRP 2400-2483.5 MHz (Bluetooth Low Energy): -0.59 dBm EIRP 2400-2483.5 MHz (WLAN IEEE 802.11b/g/n): 15.57 dBm EIRP 5150-5350 MHz, 5470-5725 MHz and 5725-5850 MHz (WLAN/RLAN IEEE 802.11a/n/ac): 15.54 dBm and 13.94 dBm (5G B4) EIRP 1710-1785 / 1805-1880 MHz (LTE Band 3, Tx/Rx): 22 dBm 2500-2570 / 2620-2690 MHz (LTE Band 7, Tx/Rx): 22.4 dBm 832-862 / 791-821 MHz (LTE Band 20, Tx/Rx): 24.9 dBm 1920-1980 / 2110-2170 MHz (LTE Band 1,Tx/Rx): 23.6 dBm 880-915 / 925-960 MHz (LTE Band 8, Tx/Rx): 24.6 dBm 703-748 / 758-803 MHz (LTE Band 28, Tx/Rx): 25dBm 2570-2620 MHz (LTE Band 38): 24 dBm 2300-2400MHz (LTE Band 40): 23 dBm 880-915 / 925-960 MHz (UMTS 900 Band, Tx/Rx): 24.9dBm 1920-1980 / 2110-2170 MHz (UMTS 2100 Band, Tx/Rx): 23.4 dBm 880-915 / 925-960 MHz (GSM/EGPRS GSM 900 Band, Tx/Rx): 33.5 dBm 1710-1785 / 1805-1880 MHz (GSM/EGPRS DCS 1800 Band, Tx/Rx): 30.3 dBm AZ IT RU Restrictions (Revision ERC/REC 70-03 E 2017-02, Annex 3 Band A: 2400-2483.5 MHz):

No license needed if used indoor and power not exceeding 30 mW. The public use is subject to general authorization by the respective service provider. SRD with FHSS modulation Maximum 2.5 mW EIRP. Maximum 100 mW EIRP. Permitted for use SRD for outdoor applications without restriction on installation height only for purposes of gathering telemetry information for automated monitoring and resources accounting systems. Permitted to use SRD for other purposes for outdoor applications only when the installation height is not exceeding 10 m above the ground surface. Maximum 100 mW EIRP. Indoor applications SRD with DSSS and other than FHSS wideband modulation Maximum mean EIRP density is 2 mW/MHz. Maximum 100 mW EIRP. Maximum mean EIRP density is 20 mW/MHz. Maximum 100 mW EIRP. It is permitted to use SRD for outdoor applications only for purposes of gathering telemetry information for automated monitoring and resources accounting systems or security systems. Maximum mean EIRP density is 10 mW/MHz. Maximum 100 mW EIRP. Indoor applications UA EIRP =100 mW with built-in antenna with amplification factor up to 6 dBi Page 1 802.11a/b/g/n/ac, Bluetooth and NFC European Community Restrictions: 5150-5350 MHz is for indoor use only. AT BE BG HR CY CZ DK EE FI FR DE GR HU IS IE IT LV LI LT LU MT NL NO PL PT RO SK SI ES SE CH GB RU RS TR Restrictions (Revision ERC/REC 70-03 E 2017-02, Annex 13 Band E1: 5150-5350 MHz, Band E2: 5470-

5725 MHz):

AZ No license needed if used indoor and power not exceeding 30 mW Restrictions (Revision ERC/REC 70-03 E 2017-02, Annex 9 Band J2: 13553-13567 kHz):

Not implemented or no information. Not implemented. Not implemented. AZ BY GE RU UA Maximum magnetic field strength is +42 dBA/m at 10 m. The maximal strength of magnetic field on the distance of 10 m from a construction where the radiator is placed is 42 dBA/m. CT40XP-ML-RS-01 Lquipement est prvu pour une utilisation dans les pays de la Communaut europenne. Plages de frquences de fonctionnement :

Modle: CT40P-L0N 13-14 MHz (NFC): PIRE -5,57 dBA/m @10 m 2 400 2 483,5 MHz (rseau personnel Bluetooth) : PIRE 9,69 dBm 2 400 2 483,5 MHz (Bluetooth basse nergie) : PIRE 1,32 dBm 2 400 2 483,5 MHz (WLAN IEEE 802.11b/g/n) : PIRE 17,11 dBm 5 150 5 350 MHz, 5 470 5 725 MHz et 5725 5850 MHz (WLAN/RLAN IEEE 802.11a/n/ac) : PIRE 15,80 dBm et 13,96 dBm (5G B4) Modle: CT40P-L1N 13-14 MHz (NFC): PIRE -9,24 dBA/m @10 m 2 400 2 483,5 MHz (rseau personnel Bluetooth) : PIRE 9,97 dBm 2 400 2 483,5 MHz (Bluetooth basse nergie) : PIRE -0,59 dBm 2 400 2 483,5 MHz (WLAN IEEE 802.11b/g/n) : PIRE 15,57 dBm 5 150 5 350 MHz, 5 470 5 725 MHz et 5725 5850 MHz (WLAN/RLAN IEEE 802.11a/n/ac) : PIRE 15,54 dBm et 13,94 dBm (5G B4) 1 710 1 785 / 1 805 1 880 MHz (LTE Band 3, Tx/Rx) : 22 dBm 2 500 2 570 / 2 620 2 690 MHz (LTE Band 7, Tx/Rx) : 22,4 dBm 832 862 / 791 821 MHz (LTE Band 20, Tx/Rx): 24,9 dBm 1 920 1 980 / 2 110 2 170 MHz (LTE Band 1,Tx/Rx) : 23,6 dBm 880 915 / 925 960 MHz (LTE Band 8, Tx/Rx) : 24,6 dBm 703 748 / 758 803 MHz (LTE Band 28, Tx/Rx) : 25 dBm 2 570 2 620 MHz (LTE Band 38) : 24 dBm 2 300 2 400MHz (LTE Band 40) : 23 dBm 880 915/925 960 MHz (bande de 900 MHz pour UMTS, Tx/Rx) : 24,9 1 920 1 980/2 110 2 170 MHz (bande de 2 100 MHz pour UMTS, Tx/Rx) : 23,4 dBm 880 915/925 960 MHz (bande de 900 MHz pour GSM/EGPRS GSM, Tx/Rx) : 33,5 dBm 1 710 1 785/1 805 1 880 MHz (bande de 1 800 MHz pour GSM/EGPRS DCS, Tx/Rx) : 30,3 dBm Restrictions (rvision ERC/REC 70-03 E 2017-02, Annexe 3 bande A : 2 400 2 483,5 MHz) Aucune licence ncessaire pour une utilisation lintrieur et une puissance ne dpassant pas 30 mW. Lusage public est soumis une autorisation gnrale du fournisseur de service respectif. Appareil de faible porte (SRD) avec modulation FHSS Puissance isotrope rayonne quivalente (PIRE) maximale 2,5 mW. Puissance isotrope rayonne quivalente (PIRE) maximale 100 mW. Lusage du SRD est autoris pour les applications extrieures sans restriction de hauteur dinstallation et uniquement des fins de collecte de donnes de tlmtrie pour la surveillance automatise et les systmes de comptabilit des ressources. Lusage du SRD est autoris dautres fins pour les applications extrieures uniquement lorsque la hauteur dinstallation ne dpasse pas les 10 m au-dessus de la surface du sol. Puissance isotrope rayonne quivalente (PIRE) maximale 100 mW. Applications lintrieur SRD avec DSSS et une technique autre que la modulation FHSS large bande La densit de PIRE moyenne maximale est de 2 mW/MHz. Puissance isotrope rayonne quivalente (PIRE) maximale 100 mW.. La densit de PIRE moyenne maximale est de 20 mW/MHz. Puissance isotrope rayonne quivalente (PIRE) maximale 100 mW. Il est permis dutiliser le SRD pour les applications extrieures uniquement aux fins de la collecte de donnes de tlmtrie pour la surveillance automatise et les systmes de comptabilit des ressources ou les systmes de scurit. La densit de PIRE moyenne maximale est de 10 mW/MHz. Puissance isotrope rayonne quivalente (PIRE) maximale 100 mW. Applications lintrieur UA PIRE = 100 mW avec une antenne intgre dote dun facteur damplification jusqu 6 dBi Das Gert kann innerhalb der gesamten Europischen Gemeinschaft verwendet werden. Betriebsfrequenzbereiche:

Modelle: CT40P-L0N 13-14 MHz (NFC): -5,57 dBA/m @10 m EIRP 24002483,5 MHz (PAN Bluetooth): 9,69 dBm EIRP 24002483,5 MHz (Bluetooth Low Energy): 1,32 dBm EIRP. 24002483,5 MHz (WLAN IEEE 802.11b/g/n): 17,11 dBm EIRP 51505350 MHz, 5470-5725 MHz und 57255850MHz (WLAN/RLAN IEEE 802.11a/n/ac): 15,80 dBm und 13,96 dBm (5G B4) EIRP Modelle: CT40P-L1N 13-14 MHz (NFC): -9,24 dBA/m @10 m EIRP 24002483,5 MHz (PAN Bluetooth): 9,97 dBm EIRP 24002483,5 MHz (Bluetooth Low Energy): -0,59 dBm EIRP 24002483,5 MHz (WLAN IEEE 802.11b/g/n): 15,57 dBm EIRP 51505350 MHz, 5470-5725 MHz und 57255850MHz (WLAN/RLAN IEEE 802.11a/n/ac): 15,54 dBm und 13,94 dBm (5G B4) EIRP 17101785/18051880 MHz (LTE Band 3, Tx/Rx) : 22 dBm 25002570 / 26202690 MHz (LTE Band 7, Tx/Rx) : 22,4 dBm 832862 / 791821 MHz (LTE Band 20, Tx/Rx) : 24,9 dBm 19201980/21102170 MHz (LTE Band 1,Tx/Rx) : 23,6 dBm 880915 / 925960 MHz (LTE Band 8, Tx/Rx) : 24,6 dBm 703748 / 758803 MHz (LTE Band 28, Tx/Rx) : 25 dBm 25702620 MHz (LTE Band 38) : 24 dBm 23002400 MHz (LTE Band 40) : 23 dBm 880915/925960 MHz (UMTS 900-Band, Tx/Rx) : 24,9 dBm 19201980/21102170 MHz (UMTS 2100-Band, Tx/Rx) : 23,4 dBm 880915/925960 MHz (GSM/EGPRS GSM 900-Band, Tx/Rx) : 33,5 dBm 17101785/18051880 MHz (GSM/EGPRS DCS 1800-Band, Tx/Rx) : 30,3 dBm Einschrnkungen (Revision ERC/REC 70-03 E 2017-02, Anhang 3 Band A: 24002483,5 MHz) Bei einer Verwendung in Innenrumen und einer Leistung unter 30 mW ist keine Lizenz erforderlich. Die ffentliche Verwendung muss vom jeweiligen Dienstanbieter genehmigt werden. SRD mit FHSS-Modulation Max. 2,5 mW EIRP. Max. 100 mW EIRP. SRD im Auenbereich ohne Einschrnkungen der Montagehhe ausschlielich zur Erfassung von Telemetriedaten zur automatischen berwachung und Bestandsverfolgung zulssig. SRD im Auenbereich zu anderen Zwecken nur bei einer Montagehhe bis zu 10 m ber dem Boden zulssig. Max. 100 mW EIRP. Anwendungen im Innenbereich. SRD mit DSSS usw. (ausgenommen FHSS-Breitbandmodulation) Die max. durchschnittliche EIRP-Dichte betrgt 2 mW/MHz. Max. 100 mW EIRP. Die max. durchschnittliche EIRP-Dichte betrgt 20 mW/MHz. Max. 100 mW EIRP. SRD im Auenbereich ausschlielich zur Erfassung von Telemetriedaten zur automatischen berwachung und Bestandsverfolgung oder fr Sicherheitssysteme zulssig. Die max. durchschnittliche EIRP-Dichte betrgt 10 mW/MHz. Max. 100 mW EIRP. Anwendungen im Innenbereich. UA EIRP =100 mW mit integrierter Antenne mit Verstrkungsfaktor von bis zu 6 dBi. 8 " * .

: CT40P-L0N 13-14 9; (NFC): EIRP -5,57 =>/ @10 24002483,5 9; (Bluetooth-PAN ): EIRP 9,69 = 2400-2483.5 9; (% Bluetooth "): EIRP 1,32 = 24002483,5 9; (WLAN IEEE 802.11b/g/n): EIRP 17,11 = 51505350 9;, 5470-5725 9; 5725-5850 9; (WLAN/RLAN IEEE 802.11a/n/ac): EIRP 15,80 = 13,96 = (5G B4)

: CT40P-L1N 13-14 9; (NFC): EIRP -9,54 =>/ @10 24002483,5 9; (Bluetooth-PAN ): EIRP 9,97= 2400-2483.5 9; (% Bluetooth "): EIRP -0,59 = 24002483,5 9; (WLAN IEEE 802.11b/g/n): EIRP 15,57 = 51505350 9;, 5470-5725 9; 5725-5850 9; (WLAN/RLAN IEEE 802.11a/n/ac): EIRP 15,54 = 13,94 = (5G B4) 17101785 / 18051880 9; (LTE Band 3, Tx/Rx): 22 = 25002570 / 26202690 9; (LTE Band 7, Tx/Rx): 22,4 = 832-862 / 791821 = (LTE Band 20, Tx/Rx): 24,9 = 19201980/21102170 9; (LTE Band 1,Tx/Rx): 23,6 = 880915 / 925960 9; (LTE Band 8, Tx/Rx): 24,6 = 703748 / 758803 9; (LTE Band 28, Tx/Rx): 25 = 25702620 9; (LTE Band 38): 24= 23002400 9; (LTE Band 40): 23 = 880915 / 925960 9; ( UMTS 900, Tx/Rx): 24,9 = 19201980 / 21102170 9; ( UMTS 2100, Tx/Rx): 23,4 = 880915 / 925960 9; ( GSM/EGPRS GSM 900, Tx/Rx): 33,5 = 17101785 / 18051880 9; ( GSM/EGPRS DCS 1800, Tx/Rx): 30,3 =

( ERC/REC 70-03 E 2017-02, 3, A: 2400-2483,5 )

" $ 30 K . 8 $ K .

(SRD) FHSSMaximum 2.5 mW EIRP. 9$ " $ (EIRP) 2,5 . 9$ " $ (EIRP) 100 . O SRD K $

% . QK "$ SRD %

% $ , K 10 . 9$ " $ (EIRP) 100 . O

.SRD with DSSS and other than FHSS wideband modulation 9$ $ EIRP 2 /9;. 9$ " $ (EIRP) 100 9$ $ EIRP 20 /9;. 9$ " $ (EIRP) 100 . O SRD

K $ % , . 9$ $ EIRP 10 /9;. 9$ " $ (EIRP) 100 . O

. UA EIRP = 100 " 6 =. AZ IT RU AZ IT RU AZ IT RU AZ BY GE RU UA AZ BY GE RU UA AZ BY GE RU UA 802.11a/b/g/n/ac, Bluetooth et NFC Restrictions de la Communaut europenne : la bande de frquences 5 150-5 350 MHz est limite une utilisation lintrieur uniquement. AT BE BG HR CY CZ DK EE FI FR DE GR HU IS IE IT LV LI LT LU MT NL NO PL PT RO SK SI ES SE CH GB RU RS TR Restrictions (rvision ERC/REC 70-03 E 2017-02, Annexe 13 bande E1 : 5 150 5 350 MHz, bande E2 : 5 470 5 725 MHz) AZ Aucune licence ncessaire pour une utilisation lintrieur et une puissance ne dpassant pas 30 mW. Restrictions (rvision ERC/REC 70-03 E 2017-02, Annexe 9 bande J2 : 13 553 13 567 KHz) :

Non applicable ou aucune information. Non applicable. Non applicable. Lintensit maximale du champ magntique est +42 dBA/m 10 m. Lintensit maximale du champ magntique une distance de 10 m dune construction dans laquelle le radiateur est plac est de 42 dBA/m. 802.11a/b/g/n/ac, Bluetooth und NFC Einschrnkungen fr die EU: 51505350 MHz ist nur fr den Einsatz im Innenbereich vorgesehen. AT BE BG HR CY CZ DK EE FI FR DE GR HU IS IE IT LV LI LT LU MT NL NO PL PT RO SK SI ES SE CH GB RU RS TR Einschrnkungen (Revision ERC/REC 70-03 E 2017-02, Anhang 13 Band E1: 51505350 MHz, Band E2: 5470 5725 MHz) AZ Bei einer Verwendung in Innenrumen und einer Leistung unter 30 mW ist keine Lizenz erforderlich. Einschrnkungen (Revision ERC/REC 70-03 E 2017-02, Anhang 9 Band J2: 1355313567 kHz):

Hinweis: Diese Einschrnkung gilt nur fr NFC-Modelle. Nicht implementiert oder keine Informationen. Nicht implementiert. Nicht implementiert. Die max. magnetische Feldstrke betrgt +42 dBA/m bei 10 m. Die max. magnetische Feldstrke bei einem Abstand von 10 m von einer Konstruktion mit Radiator betrgt 42 dBA/m. 802.11a/b/g/n/ac, Bluetooth NFC 8 * : 51505350 9; $ $

%. AT BE BG HR CY CZ DK EE FI FR DE GR HU IS IE IT LV LI LT LU MT NL NO PL PT RO SK SI ES SE CH GB RU RS TR

( ERC/REC 70-03 E 2017-02, 13, E1: 5150-5350 , E2: 5470-5725 ) AZ

" $ 30 K .

( ERC/REC 70-03 E 2017-02, 9 J2: 13553-13567 ):

!. " NFC.

& $ . 9$ +42 =>/ 10 . 9$ 10

42 =>/. Page 2 AZ IT RU

Bu donanm, Avrupa Birlii lkelerinin tmnde kullanlabilir. alma Frekans Aralklar:

Modeller: CT40P-L0N 13 - 14 MHz (NFC): -5,57 dBA/m @10 m EIRP 2400 - 2483,5 MHz (PAN Bluetooth): 9,69 dBm EIRP 2400 - 2483,5 MHz (Bluetooth Dk Enerji): 1,32 dBm EIRP 2400 - 2483,5 MHz (WLAN IEEE 802.11b/g/n): 17,11 dBm EIRP 5150 - 5350 MHz, 5470 - 5725 MHz ve 5725 - 5850 MHz (WLAN/RLAN IEEE 802.11a/n/ac): 15,80 dBm ve 13,96 dBm (5G B4) EIRP Modeller: CT40P-L1N 13 - 14 MHz (NFC): -9,24 dBA/m @10 m EIRP 2400 - 2483,5 MHz (PAN Bluetooth): 9,97 dBm EIRP 2400 - 2483,5 MHz (Bluetooth Dk Enerji): -0,59 dBm EIRP 2400 - 2483,5 MHz (WLAN IEEE 802.11b/g/n): 15,57 dBm EIRP 5150 - 5350 MHz, 5470 - 5725 MHz ve 5725 - 5850 MHz (WLAN/RLAN IEEE 802.11a/n/ac): 15,54 dBm ve 13,94 dBm (5G B4) EIRP 1710 - 1785 / 1805 - 1880 MHz (LTE Bant 3, Tx/Rx): 22 dBm 2500 - 2570 / 2620 - 2690 MHz (LTE Bant 7, Tx/Rx): 24,4 dBm 832 - 862 / 791 - 821 MHz (LTE Bant 20, Tx/Rx): 24,9 dBm 1920 - 1980/2110 - 2170 MHz (LTE Bant 1, Tx/Rx): 23,6 dBm 880-915 / 925 - 960 MHz (LTE Bant 8, Tx/Rx): 24,6 dBm 703-748 / 758 - 803 MHz (LTE Bant 28, Tx/Rx): 25 dBm 25702620 MHz (LTE Bant 38): 24 dBm 2300 - 2400 MHz (LTE Bant 40): 23 dBm 880 - 915 / 925 - 960 MHz (UMTS 900 Bant, Tx/Rx): 24,9 dBm 1920 - 1980 / 2110 - 2170 MHz (UMTS 2100 Bant, Tx/Rx): 23,4 dBm 880 - 915 / 925 - 960 MHz (GSM/EGPRS GSM 900 Bant, Tx/Rx): 33,5 dBm 1710 - 1785 / 1805 - 1880 MHz (GSM/EGPRS DCS 1800 Bant, Tx/Rx): 30,3 dBm Kstlamalar (Revizyon ERC / REC 70-03 E 2017-02, Ek 3 Bant A: 2400 - 2483,5 MHz) mekanlarda ve 30 mW' amayan g kullanldnda lisans gerekli deildir. Kamu kullanm, ilgili hizmet salaycs tarafndan genel izne tabidir. FHSS modlasyonlu SRD Maksimum 2,5 mW EIRP. Maksimum 100 mW EIRP. Kurulum yksekliinde kstlama olmakszn d mekan uygulamalar iin SRD kullanmna yalnzca otomatik izleme ve kaynak hesaplama sistemleri iin telemetri bilgileri toplamak amacyla izin verilir. Yalnzca kurulum ykseklii zemin yzeyinden maksimum 10 m yukarda olduunda d mekan uygulamalarnda dier amalar iin SRD kullanmna izin verilir. Maksimum 100 mW EIRP. mekan uygulamalar. FHSS geni bant modlasyonu dnda DSSS'li SRD Maksimum ortalama EIRP younluu 2 mW/MHz'dir. Maksimum 100 mW EIRP. Maksimum ortalama EIRP younluu 20 mW/MHz'dir. Maksimum 100 mW EIRP. D mekan uygulamalar iin yalnzca otomatik izleme ve kaynak hesaplama sistemleri veya gvenlik sistemleri iin telemetri bilgileri toplamak amacyla SRD kullanmna izin verilir. Maksimum ortalama EIRP younluu 10 mW/MHz'dir. Maksimum 100 mW EIRP. mekan uygulamalar. UA EIRP = 100 mW, amplifikasyon faktr 6 dBi'ye kadar olan dahili anten ile. CT40 XP Mobile Computer 802.11a/b/g/n/ac, Bluetooth ve NFC Avrupa Birlii Kstlamalar: 5150-5350 MHz sadece kapal alanda kullanm iindir. AT BE BG HR CY CZ DK EE FI FR DE GR HU IS IE IT LV LI LT LU MT NL NO PL PT RO SK SI ES SE CH GB RU RS TR Kstlamalar (Revizyon ERC / REC 70-03 E 2017-02, Ek 13 Bant E1: 5150 - 5350 MHz, Bant E2: 5470 - 5725 MHz) AZ mekanlarda ve 30 mW' amayan g kullanldnda lisans gerekli deildir. Kstlamalar (Revizyon ERC / REC 70-03 E 2017-02, Ek 9 Bant J2: 13553-13567 kHz):

Uygulanmad veya bilgi yok. Uygulanmad. Uygulanmad. AZ BY GE RU UA Maksimum manyetik alan kuvveti 10 m'de +42 dBA/m'dir. Radyatrn yerletirildii bir yapdan 10 m mesafedeki manyetik alann azami gc 42 dBA/m'dir. Product Environmental Information Refer to www.honeywellaidc.com/environmental for the RoHS / REACH / WEEE information. Renseignements relatifs lenvironnement propos des produits Reportez-vous la page www.honeywellaidc.com/environmental pour obtenir des renseignements concernant les directives RoHS/REACH/

WEEE. Informations environnementales sur les produits Reportez-vous au site www.honeywellaidc.com/environmental pour obtenir les informations sur les directives RoHS/REACH/WEEE. Informazioni ambientali relative al prodotto Consultare il sito web www.honeywellaidc.com/environmental per informazioni su RoHS/REACH/

RAEE. Informationen zur Umweltvertrglichkeit von Produkten Unter www.honeywellaidc.com/environmental finden Sie Informationen ber RoHS/

REACH/WEEE. Informacin ambiental del producto Consulte www.honeywellaidc.com/environmental para obtener informacin sobre RoHS/

REACH/WEEE. Informacin ambiental de producto Consulte la informacin RoHS/REACH/

WEEE en www.honeywellaidc.com/environmental. Informaes ambientais sobre produtos Consulte a pgina www.honeywellaidc.com/environmental para obter informaes sobre as normas RoHS/REACH/WEEE.

RoHS / REACH / WEEE www.honeywellaidc.com/environmental

www.honeywellaidc.com/

environmental RoHS / REACH /

WEEE

RoHS / REACH / WEEE

www.honeywellaidc.com/environmental

RoHS / REACH / WEEE www.honeywellaidc.com/environmental

RoHS / REACH / WEEE

www.honeywellaidc.com/environmental.

www.honeywellaidc.com/environmental Models: CT40P-L0N, CT40P-L1N USA, Canada NRTL Safety UL and C-UL listed: UL60950-1 2nd Edition, CSA C22.2 No. 60950-1-07 2nd Edition and UL62368-1 2nd Edition. Warning! To prevent possible hearing damage, do not listen at high volume levels for long periods. Avertissement : A pleine puissance, lcoute prolonge peut endommager laudition de lutilisateur. Microwaves The radio in the computer operates on the same frequency band as a microwave oven. Therefore, if you use a microwave within range of the RF terminal you may notice performance degradation in your wireless network. However, both your microwave and your wireless network will continue to function. LED Safety LEDs have been tested and classified as Risk Group 1 (Low-Risk) to the Standard: IEC 62471:2006. Models with Image Engine: N3601, N6700, N6603 or N6703 Laser Compliance and Precaution This device has been tested in accordance with and complies with IEC60825-1:2007, IEC60825-1:2014, 21 CFR 1040.10 and 1040.11, except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. Dolphin CT40 devices that include a laser caution label (see far right) affixed to housing are a CLASS 2 LASER PRODUCT. This product has a maximum output of 1 mW at 630-660 nm. Caution: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Mise en garde : lutilisation de contrles ou dajustements ou de performance de procdures autres que ceux spcifies dans la prsente peut provoquer une exposition dangereuse au rayonnement.

Models with Image Engine: N6803 Laser Compliance and Precaution This device has been tested in accordance with and complies with IEC60825-1:2007, IEC60825-1:2014, 21 CFR 1040.10 and 1040.11, except for conformance with IEC60825-1 Ed. 3, as described in Laser Notice No. 56, dated May 8, 2019. Dolphin CT40 devices that include a laser caution label (see far right) affixed to housing are a CLASS 2 LASER PRODUCT. This product has a maximum output of 1 mW at 645-660 nm. Caution: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Mise en garde : lutilisation de contrles ou dajustements ou de performance de procdures autres que ceux spcifies dans la prsente peut provoquer une exposition dangereuse au rayonnement.

CAUTION LASER RADIATION DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT. RAYONNEMENT LASER. NE PAS REGARDER DANS LE FAISCEAU. APPAREIL LASER DE CLASSE 2 1mW. 630-680nm.Pulse duration 16.8ms IEC 60825-1:2007 and IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except fordeviations pursuant to laser Notice No. 50, Dated June 24,2007

2 CAUTION LASER RADIATION DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT. RAYONNEMENT LASER. NE PAS REGARDER DANS LE FAISCEAU. APPAREIL LASER DE CLASSE 2 MAX. 1mW. 645-660nm. Pulse duration 10ms IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019.

2 CAUTION

LASER RADIATION DO NOT STARE INTO BEAM.CLASS 2 LASER PRODUCT. 1mW. 630-680nm. Pulse duration 16.8ms IEC 60825-1:2007 and IEC 60825-1:2014

2 CAUTION

LASER RADIATION DO NOT STARE INTO BEAM.CLASS 2 LASER PRODUCT. MAX. 1mW. 645-660nm. Pulse duration 10ms IEC 60825-1:2014

2

CAUTION: Improper battery replacement or incompatible device usage may result in risk of burns, fire, explosion, or other hazard. Dispose of batteries according to local regulations. ATTENTION : Un remplacement inadquat de la batterie ou une utilisation incompatible de l'appareil peut prsenter des risques de brulures, d'incendie, d'explosion ou d'autres dangers. Jetez les piles en lithium-ion conformment aux rgulations locales. MISE EN GARDE : Le remplacement incorrect de la pile ou l'usage d'un appareil non compatible peut reprsenter des risques de brlures, d'incendie, d'explosion ou d'autres dangers. liminez les piles lithium-ion usages conformment aux rglementations locales.

Attenzione. La sostituzione inadeguata delle batterie o un uso incompatibile del dispositivo possono causare rischi di ustioni, incendi, esplosioni o altri pericoli. Smaltire le batterie agli ioni di litio in conformit ai regolamenti locali. VORSICHT. Ungeeignete Ersatz-

Akkus oder nicht kompatible Gertenutzung kann zu Verbrennungen, Feuer, Explosion oder anderen Gefahren fhren. Entsorgen Sie die Lithium-

Ionen-Batterien gem den lokalen Richtlinien. PRECAUCIN: El reemplazo inadecuado de la batera o el uso de un dispositivo incompatible pueden dar como resultado quemaduras, un incendio, explosin u otros riesgos. Descarte todas las bateras de litio segn las regulaciones locales.

Precaucin: El reemplazo inadecuado de la batera o el uso de un dispositivo incompatible puede presentar riesgo de quemaduras, incendio, explosin, u otro tipo de riesgos. Deseche las bateras de iones de litio de acuerdo a las normativas locales. CUIDADO: a substituio incorreta da bateria ou o uso de um dispositivo incompatvel pode resultar em riscos de queimaduras, incndio, exploso ou outros perigos. Descarte as baterias de on de ltio de acordo com as regulamentaes locais.

&#9>&#*:

. Y -%

. 5 :

89 5

.P

RF Exposure Information (SAR) This mobile phone meets the government's requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government and Canadian Government. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC/IC is 1.6W/kg and for Europe 2W/Kg. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Model CT40P-L0N FCC SAR The highest reported FCC SAR values for head and body-worn accessory use conditions are: 0.630 W/kg (1g) and 0.820 W/kg (1g). IC SAR The highest reported IC SAR values for head and body-worn accessory use conditions are: 0.630 W/kg (1g) and 0.820 W/kg (1g). CE SAR The highest reported CE SAR values for head and body-worn accessory use conditions are: 0.30 W/kg (10g) and 0.26 W/kg (10g). Model CT40P-L1N FCC SAR The highest reported FCC SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are:

0.58W/kg (1g), 0.92W/kg (1g), 1.42W/kg (1g), and 1.52W/kg (1g) IC SAR The highest reported IC SAR values for head, body-worn accessory, hotspot and simultaneous transmission use conditions are:

0.58W/kg (1g), 0.92W/kg (1g), 1.42W/kg (1g), and 1.52W/kg (1g) CE SAR The highest reported CE SAR values for head, body-worn accessory and simultaneous transmission use conditions are:

0.656W/kg (10g), 1.637W/kg (10g) and 1.799W/kg (10g). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. Informations sur l'exposition RF Ce tlphone mobile respecte les exigences du gouvernement en matire dexposition aux ondes radio. Ce tlphone est conu et fabriqu de manire ne pas dpasser les limites dmission pour lexposition lnergie de radiofrquence (RF) tablies par la Commission fdrale des communications des gouvernements amricain et canadien. La norme dexposition pour les tlphones mobiles sans fil utilise une unit de mesure connue sous le nom de dbit dabsorption spcifique ou DAS. La limite du DAS tablie par la Commission fdrale des communications FCC/IC est de 1,6W/kg et de 2W/kg pour lEurope. Bien que le DAS soit dtermin en fonction du plus haut niveau de puissance certifi, le niveau rel du DAS du tlphone en cours dutilisation peut tre nettement infrieur la valeur maximale. Ceci sexplique par le fait que le tlphone est conu pour fonctionner plusieurs niveaux de puissance ainsi que pour utiliser uniquement le puissance requis pour atteindre le rseau. En gnral, plus vous vous trouvez proximit dune antenne de station de base sans fil, plus la puissance de sortie sera faible.. Modle CT40P-L0N DAS FCC Les valeurs DAS FCC les plus leves pour les conditions d'utilisation des accessoires ports sur la tte et le corps sont les suivantes:

0,630 W/kg (1g) et 0,820 W/kg (1g). DAS IC Les valeurs DAS IC les plus leves pour les conditions d'utilisation des accessoires ports sur la tte et le corps sont les suivantes:

0,630 W/kg (1g) et 0,820 W/kg (1g). Modle CT40P-L1N DAS FCC Les valeurs DAS FCC les plus leves signales pour les conditions d'utilisation de la tte, des accessoires ports sur le corps, hotspot et de la transmission simultane sont les suivantes: 0,58 W/ kg (1 g); 0,92 W/kg (1 g); 1,42 W/kg (1 g) et 1,52 W/kg (1 g). DAS IC Les valeurs DAS IC les plus leves signales pour les conditions d'utilisation de la tte, des accessoires ports sur le corps, hotspot et de la transmission simultane sont les suivantes: 0,58 W/ kg (1 g); 0,92 W/kg (1 g); 1,42 W/kg (1 g) et 1,52 W/kg (1 g). The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID/IC ID: HD5-CT40PL1N/1693B-CT40PL1N, HD5CT40PL0N/1693B-CT40PL0N SAR is measured with this device at a saperation of 5mm to the body.

Caution: If a body worn accessory is not purchased from Honeywell, the accessory must contain no metal and provide a 1.5 cm (0.6 in) space between the device and the body. Use of antennas and accessories not authorized may void the compliance of this product and may result in RF exposures beyond the limits established for this equipment.

Mise en garde : Si un accessoire de corps nest pas achet auprs dIntermec, cet accessoire ne doit contenir aucun mtal et garantir un espace de 1,5 cm entre lappareil et le corps. Lutilisation dantennes et daccessoires non autoriss peut annuler la conformit de cet appareil et peut causer une exposition aux RF au-del des limites tablies pour cet quipement. Page 3 Model CT40P-L1N Hearing Aid Compatibility (HAC) The standard for compatibility of digital wireless devices with hearing aids is set forth in American National Standards Institute (ANSI) standard C63.19. ANSI C63.19 contains these two sets of standards:

An M rating from M1 to M4 for reduced radio frequency (RF) interference to enable acoustic coupling with hearing aids that do not operate in t-coil mode. A T rating from T1 to T4 to enable inductive coupling with hearing aids operating in t-coil mode. A digital wireless handset is considered hearing aid compatible for acoustic coupling if it meets at least an M3 rating under the ANSI standard. A digital wireless handset is considered hearing aid compatible for inductive coupling if it meets at least a T3 rating under the ANSI standard. M-Ratings: Devices rated M3 or M4 meet FCC requirements and are likely to generate less interference with hearing devices than devices that are not labeled. M4 is the superior/higher of the two ratings. T-Ratings: Devices rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing devices t-coil than unrated devices. T4 is the superior/higher of the two ratings. These ratings are not guaranteed. Results will vary depending on the level of immunity of your hearing device and the degree of your hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated device successfully. Trying out the device with your hearing device is the best way to evaluate it for your personal needs. When some wireless devices are used near some hearing devices such as hearing aids and implants, users may detect a buzzing or humming noise. Some hearing devices are more immune than others to this interference noise. Wireless devices may also vary in the amount of interference they generate. The more immune the hearing aid device is, the less likely one is to experience interference noise from the wireless device. Hearing aid devices may also be rated. Adding the ratings of the hearing aid and the device can predict the usability of the two devices together:

Any combined rating equal to or greater than six offers the best use. Any combined rating equal to five is considered normal use. These models have been tested and rated for use with hearing aids for some of the wireless technologies that they use. However, there may be some newer wireless technologies used in these devices that have not been tested yet for use with hearing aids. It is important to try the different features of these devices thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of the device for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or device retailer. The following devices are currently offered:

Model CT40P-L1N HAC Rating Air-Interface C63.19 Version M4/T4 GSM/WCDMA/CDMA/LTE 2011 Model CT40P-L0N Hearing Aid Compatibility (HAC) Consumer Information a) This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. In the battery well of this equipment is a label that contains, among other information, a product identifier in the format US: HD5IPNANCT40P-L0N. If requested, this number must be provided to the telephone company. b) The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. c) Should you experience trouble with this equipment, please contact Honeywell International Inc, 13509 South Point Blvd, Ste.100, Charlotte, NC 28273, Tel: 800-782-4263 for repair or warranty information. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. e) This equipment is hearing aid compatible. d) Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do not alternate or repair any parts of device except specified. Patents For patent information, refer to www.hsmpats.com. Brevets Veuillez consulter le site www.hsmpats.com pour obtenir des renseignements au sujet du brevet. Brevets Pour plus dinformations sur les brevets, visitez la page www.hsmpats.com. Brevetti Per i dettagli sui brevetti, fare riferimento al sito Web www.hsmpats.com. Patente Patentinformationen sind unter www.hsmpats.com erhltlich. Patentes Para obtener informacin sobre las patentes, visite www.hsmpats.com. Patentes Para obtener informacin sobre patentes, consulte www.hsmpats.com. Patentes Para obter informaes sobre patente, consulte www.hsmpats.com.

www.hsmpats.com

www.hsmpats.com

www.hsmpats.com

www.hsmpats.com

- www.hsmpats.com.

: www.hsmpats.com

. For warranty information, go to www.honeywellaidc.com and click Get Resources > Product Warranty. Pour obtenir des renseignements sur la garantie, rendez-vous sur www.honeywellaidc.com et cliquez sur Ressources > Garantie du produit. Pour obtenir des informations sur la garantie, rendez-vous sur www.honeywellaidc.com et cliquez sur Get Resources (Obtenir des ressources) >

Product Warranty(Garantie du produit). Per informazioni sulla garanzia, visitare www.honeywellaidc.com e fare clic su Ottieni risorse > Garanzia prodotto. Informationen zur Garantie finden Sie auf unserer Website www.honeywellaidc.com unter Get Resources > Product Warranty. Obtenga informacin sobre la garanta en www.honeywellaidc.com y seleccione Get Resources (Obtener recursos) >

Product Warranty (Garanta del producto). Para obtener informacin sobre la garanta, visite el sitio www.honeywellaidc.com y haga clic en Obtener Recursos > Garanta del producto. Para ver informaes sobre a garantia, acesse www.honeywellaidc.com e clique em Recursos > Informaes de garantia.

www.honeywellaidc.com Get Resources > Product Warranty

www.honeywellaidc.com

Get Resources ( ) > Product Warranty ( )

www.honeywellaidc.com Get Resources ( ) > Product Warranty ( )

www.honeywellaidc.com

Get Resources( ) >

Product Warranty( )

. Z $

, - www.honeywellaidc.com

GetResources > Product Warranty

). Get

www.honeywellaidc.com Resources

This document was prepared and executed in the English language. In the event this document is translated into another language and a conflict arises between the English version and a non-

English version, the English version shall prevail, it being recognized and acknowledged that the English language version most clearly expresses the intent of the parties. Any notice or communication given in connection with this document must include a version in the English language. Ce document a t prpar et excut dans la langue anglaise. Dans lventualit o le document serait traduit dans une autre langue et qu'un litige survenait entre la version en anglais et la version autre qu'en anglais, la version en anglais prvaudra, tant confirm et reconnu que la version en anglais exprime de faon plus prcise lintention des parties. Tout avis ou toute communication relatif ce document doit inclure une version en anglais. Ce document a t prpar et finalis en anglais. Si ce document est traduit dans une autre langue et si un conflit survient entre la version en anglais et la version traduite, la version en anglais prvaudra tant il est reconnu et tabli quelle exprime le plus clairement les intentions des parties. Tout avis ou communication produit en relation avec ce document doit comporter une version en anglais. Este documento foi preparado e feito em lngua inglesa. Se este documento for traduzido para outro idioma e surgirem conflitos entre a verso em ingls e a verso no outro idioma, a verso em ingls prevalecer, sendo reconhecido e atestado que a verso em lngua inglesa expressa mais claramente a inteno das partes. Qualquer comunicao ou aviso relacionado a este documento deve conter a verso em ingls.

Questo documento stato preparato e redatto in lingua inglese. In caso di traduzione in altre lingue, nelleventualit sorgano conflitti fra la versione non inglese e quella inglese, prevarr questultima in quanto viene riconosciuto e accettato che la versione in lingua inglese esprime pi chiaramente gli accordi fra le parti. Qualsiasi notifica o comunicazione inviata in rapporto a questo documento deve includere una versione in lingua inglese. Dieses Dokument wurde in englischer Sprache erstellt und ausgefertigt. Wenn dieses Dokument in eine andere Sprache bersetzt wird, und ein Konflikt zwischen der englischen und nicht-englischen Fassung auftritt, hat die englische Fassung Vorrang, da die Parteien anerkennen, dass die Fassung in englischer Sprache ihren Absichten am deutlichsten Ausdruck verleiht. Alle Hinweise oder Mitteilungen in Zusammenhang mit diesem Dokument mssen auch in einer Fassung in englischer Sprache erfolgen.

. Originalmente, este documento se cre y redact en ingls. En caso de que se traduzca a otro idioma y surja un conflicto entre la versin en ingls y la versin en otro idioma, prevalecer la versin en ingls. Se reconoce y admite que, en la versin en ingls, expresa la intencin de las partes con ms claridad. Cualquier aviso o comunicacin proporcionada en relacin con este documento debe incluir una versin en ingls. Este documento se prepar y redact en ingls. En caso de que se traduzca a otro idioma y surja algn conflicto entre la versin en ingls y la del idioma extranjero, prevalecer la versin en ingls, dado que se reconoce y admite que la versin en ingls expresa ms claramente la intencin de las partes. Cualquier aviso o comunicacin proporcionada en relacin con este documento deber incluir una versin en ingls. 5

5

P P

. 5

.5 &

. Honeywell International Inc. 9680 Old Bailes Road Fort Mill, SC 29707 USA Page 4 2020 Honeywell International Inc. All rights reserved. CT40XP-ML-RS-01 7/20

Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA Label Label Location

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Confidentiality Request Letter Federal Communications Commission Authorization and Evaluation Division FCC ID: HD5-CT40PL0N Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this 1. Block Diagram 2. Schematics application. Sincerely, _________________ Name: Mandana Salahshour Position: Regulatory Compliance Manager Email: Mandana.Mobasher@honeywell.com Date: 2022-06-23

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Declaration of Authorization We Name: Honeywell International Inc Honeywell Safety and Productivity Solutions Address: 9680 Old Bailes Rd. Fort Mill, SC 29707 United States Declare that:

Name Representative of agent: Marlin Chen Agent Company name:

Address:

is authorized to apply for Certification of the following product(s):

MRT Technology (Suzhou) Co., Ltd D8 Building, Youxin Industrial Park, No.2 Tian'edang Rd., Wuzhong Economic Development Zone Suzhou China Mobile Computer HD5-CT40PL0N 1693B-CT40PL0N CT40P-L0N Honeywell City:

Country:

Product:

FCC ID:

IC:

Model:

Brand:

Sincerely, _________________ Name: Mandana Salahshour Position: Regulatory Compliance Manager Email: Mandana.Mobasher@honeywell.com Date: 2022-06-23

Pursuant to CFR 2.1043, Honeywell International Inc hereby requests a Permissive Change Class II for its application with FCC ID: HD5-CT40PL0N granted on 07/30/2020. Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com C2PC Cover Letter Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 TO WHOM IT MAY CONCERN Request for Permissive Change Class II FCC ID: HD5-CT40PL0N Modifications:

Change NFC chipset from NQ310 to NQ410. The new chip component is pin-for-pin compatible. The new chip has the same basic function as the old chip. No change in radio parameters has occurred. Placed in the same position Sincerely, _________________ Name: Mandana Salahshour Position: Regulatory Compliance Manager Email: Mandana.Mobasher@honeywell.com Date: 2022-06-23

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Declaration of Authorization We Name: Honeywell International Inc Honeywell Safety and Productivity Solutions Address: 9680 Old Bailes Rd. Fort Mill, SC 29707 United States Declare that:

Name Representative of agent: Marlin Chen Agent Company name:

Address:

City:

Country is authorized to apply for Certification of the following product(s):

Product description: Mobile Computer Type designation: CT40P-L0N Trademark: Honeywell on our behalf. Date:

Name: Mandana Salahshour June 29, 2021 Signature:

MRT Technology (Suzhou) Co., Ltd D8 Building, Youxin Industrial Park, No.2 Tian'edang Rd., Wuzhong Economic Development Zone, Suzhou China 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

Safety and Productivity Solutions

9680 Old Bailes Road

Fort Mill, SC 29707 USA

www.honeywell.com www.honeywellaidc.com

C2PC Cover Letter

Federal Communication Commission

Equipment Authorization Division, Application Processing Branch

7435 Oakland Mills Road

Columbia, MD 21048

2021-06-29

TO WHOM IT MAY CONCERN

Request for Permissive Change Class II

FCC ID: HD5-CT40PL0N

Pursuant to CFR § 2.1043, Honeywell International Inc hereby requests a Permissive Change

Class II for its application with FCC ID: HD5-CT40PL0N granted on 01/12/2021 and application

with FCC ID: HD5-CT40PL0N granted on 07/30/2020.

Modifications:

• Change Wi-Fi PA from Qovro QM48858 to Murata LMFE3NFB-J38

• Two PA chip has same basic function, pin-for-pin compatible, and satisfy FCC KDB 178919

D01v06 section III)D) four conditions.

model name shall be same as before.

Besides, we attest that there is no any other hardware and software change to this EUT, the

Sincerely,

Sign by:

Mandana Salahshour / Product Compliance

Honeywell International Inc

Honeywell Safety and Productivity Solutions

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com C2PC Cover Letter Federal Communication Commission Equipment Authorization Devision, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 2020-12-31 TO WHOM IT MAY CONCERN Request for Permissive Change Class II FCC ID: HD5-CT40PL0N Pursuant to CFR 2.1043, Honeywell International Inc hereby requests a Permissive Change Class II for its application with FCC ID: HD5-CT40PL0N granted on 2020-07-

Open channel 12/13 for 802.11b/g/n-H20 & channel 10/11 for 802.11n-H40 2.4GHz frequency band via software and we attest that there is no hardware change to this EUT. The model name shall be same as before. 30. Modifications:

Sincerely, Sign by:

Print Name: Mandana Salahshour Title: Compliance Manager Honeywell International Inc Honeywell Safety and Productivity Solutions

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Date: Dec 31, 2020 Federal Communications Commission Authorization and Evaluation Division FCC ID: HD5-CT40PL0N Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

1. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Name:

Position: Compliance Manager Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

ATTESTATION Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Rd. Fort Mill, SC 29707 United States Date: July 20, 2020 Federal Communications Commission Authorization and Evaluation Division FCC ID: HD5-CT40PL0N Product: Mobile Computer Model: CT40P-L0N Sincerely, Name: Mandana Salahshour Position: Compliance Manager Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Rd. Fort Mill, SC 29707 United States We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA.

Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Rd. Fort Mill, SC 29707 United States Client Declaration Letter Date: July 20, 2020 FCC ID: HD5-CT40PL0N We have declared below featured for device identified as

(1) DFS Device

(2) Active / Passive Scanning , ad hoc mode access point capability Master, Client without radar detection capability, Client with Radar detection capability , N/A Frequency Band (MHz) 2412 - 2462 5180 - 5240 5260 - 5320 5500 - 5720 5745 - 5825 Client Mode Yes Yes Yes Yes Yes Ad Hoc Mode capability Access point Capability WiFi Direct Group Owner WiFi Direct Group Client Yes No No No No Yes No No No No Yes No No No No Yes No No No No

(3) Country code selection capability to end user-

Yes No If yes, pls explain how it was implemented: (pls also help to provide detail of options for each country selection)

(4) Meet Part 15.202 requirement -

Yes , No ,

* A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cant be modified by end user or an installer. Apply No Apply

(If apply, pls help to provide explanation on it was implement, and how software was controlled). Name: Mandana Salahshour Position: Compliance Manager Honeywell International Inc Honeywell Safety and Productivity Solutions

Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Rd. Fort Mill, SC 29707 United States Date: July 20, 2020 Non-SDR (Software Defined Radio) Cover Letter Refer to KDB 442812 D01 SDR apps Guide v02r03. The following six questions can be used for determining if a radio can elect to be, or must be an SDR. 1. Can the RF parameters of the device be altered through software?

Yes - go to 2. No, not an SDR Reply: Yes 2. Can third parties not permitted by the Commission through specific filings modify, configure, or load different software, or make configuration settings to operate the device or host hardware radio frequency parameters

(frequency range, modulation type, maximum output power or other radio parameters) in any other way than granted (or expected to be granted)?

Yes, must be an SDR. No - go to 3. Reply: No 3. Is the device capable of operating in any other in any other way Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Rd. Fort Mill, SC 29707 United States than granted, or will be, granted?

Yes, - go to 4. No - go to 5. Reply: No 4. Is this a Part 15 client Device as defined in Section 15.202 (as opposed to a master device)?

Yes, qualifies as a part 15 client devices - go to 5. No, must be an SDR. 5. Does the manufacturer elect SDR?

Yes, elects to be an SDR. This product shall be approval as a Non-SDR which is declared by No, Not an SDR Reply: No Final conclusion:

the applicant. Sign by:

Print Name: Mandana Salahshour Title: Compliance Manager