FCC ID: HD5-CT45PL1N2 Mobile Computer

FCC Regulations:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 1.0cm between the radiator & your body. The highest reported FCC SAR values for head and body-worn accessory use conditions are: 1.27 W/kg (1g) and 1.19 W/kg (1g). ISED Notice This device complies with Science and Economic Development Canadas license-exempt RSS standard(s). Operation is subject to the following two conditions:

1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

1) l'appareil ne doit pas produire de brouillage, et 2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. Cet appareil et son antenne ne doivent pas tre situs ou fonctionner en conjonction avec une autre antenne ou un autre metteur, exception faites des radios intgres qui ont t testes. The County Code Selection feature is disabled for products marketed in the US/ Canada. La fonction de slection de l'indicatif du pays est dsactive pour les produits commercialiss aux tats-Unis et au Canada. Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 1.0 cm between the radiator & your body. The highest reported IC SAR values for head and body-worn accessory use conditions are: 1.27 W/kg (1g) and 1.19 W/kg (1g). Dclaration d'exposition aux radiations: Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 1.0cm de distance entre la source de rayonnement et votre corps. The device for operation in the band 5150-5250 MHz is only for indoor use. les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur Hereby, Honeywell International Inc declares that the radio equipment CT45P-L1N-2 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address www.honeywellaidc.com/compliance 5G wifi restriction e.g. 5150-5350MHz is for indoor use only in all member states Or similar following form. The device operates with the following frequency bands and transmitting power:

Frequency bands Maximum output power Bluetooth 2402~2480MHz 6.66 dBm (EIRP) WIFI 2.4G Band WIFI 5G Band 19.89 dBm (EIRP) 18.49 dBm (EIRP) Contact information (manufacturer& postal address, importer & address) European contact:

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen The Netherlands United Kingdom Contact:

United Kingdom Honeywell Scanning and Mobility, Honeywell House, Skimped Hill Lane, Bracknell, Berkshire, RG12 1EB Phone: +44 (0)1344921052 A minimum separation distance of 0.5cm must be maintained between the users body and the device, including the antenna during body-worn operation to comply with the RF exposure requirements in Europe. The highest reported CE SAR values for head and body-worn accessory use conditions are: 0.88 W/kg (10g) and 1.64 W/kg (10g).

CT45/CT45 XP Series powered by Android Quick Start Guide CT45-A-EN-QS-01 Rev A 5/21 Agency Models CT45 series: CT45-L0N, CT45-L1N-G, CT45-L1N-A CT45 XP series: CT45P-X0N, CT45P-L1N-2, CT45P-L1N-E Note: Due to variations in model configurations, your computer may appear different then illustrated. Out of the Box Make sure that your shipping box contains these items:

CT45/CT45 XP mobile computer Rechargeable li-ion battery Hand strap Product documentation If you ordered accessories for your mobile computer, verify that they are also included with the order. Be sure to keep the original packaging in case you need to return the mobile computer for service. Note: CT45-L0N and CT45P-X0N models do not include a WWAN radio. Memory Card Specifications Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD or microSDHC memory cards with mobile computers for maximum performance and durability. Contact a Honeywell sales representative for additional information on qualified memory card options. 1 Imager Window

(LED/Laser Aperture) Computer Features Speaker

(Handset Receiver) Scan Status LED Battery Status/

Notification LED Microphone Front Camera Power Button Push-to-Talk Button Scan Button Touch Panel Scan Button Speaker Microphone 2 Note: Hand strap not shown. Laser Safety Label Location Camera Lens and Flash Volume Button Scan Button Nano SIM and/

or MicroSD Card Door Audio Jack Pin

(Model Dependent) I/O Connector USB, Type C 3 Batter Latch Speaker Out for Bluetooth Low Energy Beacon*

(CT45 XP Only) In Port for Bluetooth Low Energy Beacon*

(CT45 XP Only) Microphone Barometer Sensor Battery

* Part of Honeywell Device Finder solution when CT45/CT45 XP mobile computer is registered with Operational Intelligence. 4 Install a Nano SIM Card(s) CT45 series: CT45-L1N-xxxx2xx, CT45 XP series: CT45P-L1N-xxxx2xx, CT45P-L1N-xxxxExx x = configuration variation 1 SIM 1 SIM 2: Model Dependent 2 3 Note: Always power off the computer before attempting to install or remove a card. 5 Install a microSD Card (Optional) CT45 series: CT45-L1N-xxxx2xx, CT45 XP series: CT45P-L1N-xxxx2xx, CT45P-L1N-xxxxExx x = configuration variation Note: Format the microSD card before initial use. 1 2 Note: Always power off the computer before attempting to install or remove a card. 6 Install a microSD Card (Optional) CT45 series: CT45-L0N-xxxx0xx CT45 XP series: CT45P-X0N-xxxx0xx x = configuration variation Note: Format the microSD card before initial use. 1 2 3 4 Note: Always power off the computer before attempting to install or remove a card. 7 About the Battery The mobile computer ships with a 3.85 VDC, 15.5 watt-hour Li-ion battery manufactured for Honeywell International Inc. We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage not covered by the warranty. Nous recommandons lutilisation de batteries Li-ion de la marque Honeywell. Lutilisation dune batterie dun autre fabricant est susceptible de provoquer des dommages non couverts par la garantie. Ensure all components are dry prior to placing the battery in the computer. Mating wet components may cause damage not covered by the warranty. Assurez-vous que tous les composants sont secs avant dinsrer la batterie dans lordinateur. Linsertion de composants humides risque de provoquer des dommages non couverts par la garantie. 8 Install Battery 2 1 9 Install the Hand Strap 1 3 2 4 10 Charge the Mobile Computer The mobile computer ships with a partially charged battery. Charge the battery with a CT40/CT45 Series charging device for a minimum of 3 hours. Note: Using the computer while charging the battery increases the time required to reach a full charge. If the mobile computer is drawing more current than supplied by the charging source, charging will not take place. We recommend the use of Honeywell accessories and power adapters. Use of any non-Honeywell accessories or power adapters may cause damage not covered by the warranty. Nous recommandons dutiliser des accessoires et des adaptateurs secteur de marque Honeywell. Lutilisation de tout accessoire ou adaptateur secteur dune autre marque est susceptible de provoquer des dommages non couverts par la garantie. CT45/CT45 XP series mobile computers are designed for use with CT40/CT45 Series charging accessories. For more information, see the CT40/CT45 Series Accessory Guide available for download at www.honeywellaidc.com. Ensure all components are dry prior to mating the computers and batteries with peripheral devices. Mating wet components may cause damage not covered by the warranty. Assurez-vous que tous les composants sont secs avant de raccorder les ordinateurs et les batteries des priphriques. Linsertion de composants humides risque de provoquer des dommages non couverts par la garantie. 11 About the USB Type C Connector You can use a USB cable to charge the mobile computer from a host device (e.g., laptop or desktop computer). The connected host device must supply a minimum power output of 5V, 0.5A to the CT45/CT45 XP or the battery will not charge. Turn Power On/Off The first time you power on the computer, a Welcome screen appears. You can either scan a configuration barcode or use the Wizard to manually set up the computer. Once setup is complete, the Welcome screen no longer appears on startup and Provisioning mode is automatically turned off (disabled). To turn the computer on:

Press and hold the Power button for approximately 3 seconds, and then release. To turn the computer off:

appears. 2. Touch Power Off. 1. Press and hold the Power button until the options menu Battery Replacement Before removing the battery, always do one of the following:

Power off the computer. Place the unit in Swap Battery mode (available on CT45 XP models only). 12 Swap Battery Mode (CT45 XP Only) Swap Battery mode places the computer in a low power state so that the battery can be removed for a short time. This feature is not available on all models. To activate Swap Battery mode:

1. Press and hold the Power button until the options menu appears. 2. Touch Swap Battery and follow the on-screen instructions. 3. Once you replace the battery, press the Power button. Screen Timeout The screen timeout (sleep mode) automatically turns the touch panel display off and locks the computer to save battery power when the computer is inactive for a programmed period of time. Press and release the Power button to wake the computer. Adjust the Screen Timeout To adjust the amount of time before the display sleeps after inactivity:

1. Swipe up on the touch screen. 2. Select Settings > Display > Advanced > Screen Timeout. 3. Select the amount of time before the display goes to sleep. 13 About the Home Screen Notification /

Status Bar Home Screen Panel Favorites Tray Search Bar Navigation Buttons 14 Navigation and Function Buttons For button locations, see Computer Features on page 2. Button Description Back Return to the previous screen. Home Return to the Home screen. Recent Apps View and switch between recently used apps. Scan Volume Touch the front (on-screen) Scan but-

ton to trigger the scanner. Press the top of the button to raise the speaker volume. Press the bottom of button to lower the speaker volume. Scan Press left or right Scan button to trig-

ger the scanner. Push-to-Talk Push-to-Talk button for use with apps that support the feature for voice over IP (VoIP) calls over Wi-Fi or cellular data network connections. Turn Power On/Off Power Enter/Exit Screen Timeout (sleep). Access options menu, including:

Power off, Restart, and Swap Battery Mode (CT45 XP Only). 15 About Provisioning Mode After completing the out-of-box set up process, Provisioning mode is automatically turned off. Scanning a barcode to install applications, certificates, configuration files, and licenses on the computer is restricted unless you enable Provisioning mode in the Settings app. To learn more, see the user guide. Scan a Barcode with the Scan Demo For optimum performance, avoid reflections by scanning the barcode at a slight angle. 1. Swipe up on the screen. 2. Select Demos > Scan Demo. 3. Point the computer at the barcode. 4. Touch Scan on the screen or press and hold any Scan button. Center the aiming beam over the barcode. The decode results appear on the screen. Note:

In the Scan Demo app, not all barcode symbologies are enabled by default. If a barcode does not scan, the correct symbology may not be enabled. To learn how to modify the default app settings, see the user guide. 16 Sync Data To move files between your CT45/CT45 XP and a computer:

1. Connect the CT45/CT45 XP to your computer using a USB charge/communication accessory. 2. On the CT45/CT45 XP, swipe down from the top of the screen to see the notifications panel. 3. Touch the Android System notification twice, to open the options menu. 4. Select either File Transfer or PTP. 5. Open the file browser on your computer. 6. Browse to the CT45/CT45 XP. You can now copy, delete, and move files or folders between your computer and CT45/

CT45 XP as you would with any other storage drive (e.g., cut and paste or drag and drop). Note: When Provisioning mode is turned off, some folders are hidden from view in the file browser. 17 Restart the Mobile Computer You may need to restart the mobile computer to correct conditions where an application stops responding to the system or the computer seems to be locked up. 1. Press and hold the Power button until the options menu appears. 2. Select Restart. To restart the computer if the touch panel display is unresponsive:

Press and hold the Power button for approximately 8 seconds until the computer restarts. Note: To learn about advanced reset options, see the user guide. Support To search our knowledge base for a solution or log into the Technical Support Portal and report a problem, go to www.hsmcontactsupport.com. Documentation Product documentation is available at www.honeywellaidc.com. 18 Limited Warranty For warranty information, go to www.honeywellaidc.com and click Resources > Product Warranty. Patents For patent information, see www.hsmpats.com. Trademarks Android is a trademark of Google LLC. Disclaimer Honeywell International Inc. (HII) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII. HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. Copyright 2021 Honeywell International Inc. All rights reserved. 19

50142903 Marketing Prod. Series Name Brand Owner: Honeywell International Inc Brand : Honeywell CT45XP

: CT45P-L1N-2 FCC ID: HD5-CT45PL1N2 IC: 1693B-CT45PL1N2 CAN ICES-3(B)/NMB-3(B) HARDWARE: XXXX IMEI1: XXXX IMEI2: XXXX 50176072-003(For CT45XP WWAN: 2 Nano SIMs)

Honeywell International Inc 9680 Old Bailes Road, Fort Mill, SC 29707 United States Label Location Declaration We, Honeywell International Inc, declared that for our device FCC ID: HD5-CT45PL1N2, the label will be placed under the battery, inside the battery compartment, and it will be visible to the users as they purchase the product and install the battery. If you have any question regarding the declaration, please dont hesitate to contact us. Thank you!

Sincerely yours, _______________ Mandana Salahshour Honeywell International Inc Tel: 8038358190 Fax: 8038358097 E-mail: mandana.salahshour@honeywell.com

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Declaration Of Change Description We, Honeywell International Inc as the manufacturer, hereby declare that we are only fully responsible for our product of FCC ID: HD5-CT45PL1N2, originally granted on Date: January 18, 2022 12/08/2021;

Model Name: CT45P-L1N-2 Brand Name: Honeywell version. The difference is described as following:

SW changes to enable HAC operation Introduce below 2nd source components:

The product hardware layout, antenna and RF performance is exactly same with the previous IC function Original PN Vendor 2nd Source PN Vendor QTY Speaker smart PA TAS2563YBGR MAX98390CEWX+T ADC ADS1015IRUGR MAX1363EUB+T TI TI ESD diode PESD5V0H1BSF Nexperia PESDEC2XD5VBF Presemi ESD diode PESD2USB3SZ Nexperia PESDEC2XD5VBF Schottky Diode NSR0520V2T1G OnSemi BAT30KFILM OR gate NC7SZ332L6X On Semi SN74LVC1G332DRY2 ESD diode ESD239-B1-W0201 Infineon ESD144B1W0201E6327XTSA1 Infineon Common mode clock&ESD EMI8132MUTAG On Semi ECMF4-20A42N10 Except for the above-mentioned difference, all the other portions remain unchanged. Sincerely, Maxim Integrated Maxim Integrated Presemi ST Micro TI ST 1 1 4 2 5 1 7 4 Contact Person: mandana.salahshour Company name: Honeywell International Inc Tel.: 8038358190 Fax: 8038358097 E-mail: mandana.salahshour@honeywell.com

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Federal Communications Commission 7435 Oakland Mills Road - Gate A Columbia, Maryland 21046 Date: December 28, 2021 Parts List Schematic Diagram Subject: Request for Confidentiality FCC ID: HD5-CT45PL1N2 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, External Photos Internal Photos Test Setup Photos Mandana Salahshour Honeywell International Inc Tel: 8038358190 Fax: 8038358097 E-mail: mandana.salahshour@honeywell.com

Date:08/16/2021 FederalCommunicationsCommission OfficeofEngineeringandTechnologyLaboratoryDivision 7435OaklandMillsRd. ColumbiaMD21046 Attn:OfficeofEngineeringandTechnology FCCID:HD5-CT45PL1N2 Towhomitmayconcern:

Honeywell International Incherebydeclaresthat 1.ThisdevicedoesnotpreinstalledanyVOIPservicebeforeitissoldtotheenduser,Usersinstalling theOTTservicemustconsiderthatdeviceisnotevaluatedforcompliancewithOTTHAC;

2.TheMIFvaluesdetailedbelowarebasedonworstcaseoperatingmodesforallairinterfacesfor whichtheHACMratingisprovidedbasedonthecurrentmethodologyANSIC63.192011withpre determinedMIFvalueswhichprovidedbySpeag. UID 10021 10025 10460 10225 10081 10295 10403 10169 10170 10179 10181 10175 Communication System Name MIF(dB) GSM-FDD(TDMA,GMSK) EDGE-FDD (TDMA, 8PSK, TN 0) UMTS-FDD(WCDMA, AMR) UMTS-FDD (HSPA+) CDMA2000 (1xRTT, RC3 Full Rate) CDMA2000 (1xRTT, RC1 SO3, 1/8th Rate 25 fr.) CDMA2000 (1xEV-DO) LTE-FDD(SC-FDMA,1RB,20MHz,QPSK) LTE-FDD(SC-FDMA,1RB,20MHz,16-QAM) LTE-FDD(SC-FDMA,1RB,20MHz,64-QAM) LTE-FDD(SC-FDMA,1RB,15MHz,QPSK) LTE-FDD(SC-FDMA,1RB,10MHz,QPSK) 3.63 3.75

-25.43

-20.39

-19.71 3.26

-17.67

-15.63

-9.76

-9.93

-15.63

-15.63 LTE-FDD(SC-FDMA,1RB,5MHz,QPSK) LTE-FDD(SC-FDMA,1RB,3MHz,QPSK) LTE-FDD(SC-FDMA,1RB,1.4MHz,QPSK) Communication System Name LTE-TDD (SC-FDMA, 1 RB, 20 MHz, QPSK) LTE-TDD (SC-FDMA, 1 RB, 20 MHz, 16-QAM) LTE-TDD (SC-FDMA, 1 RB, 20 MHz, 64-QAM) LTE-TDD (SC-FDMA, 1 RB, 15 MHz, QPSK) LTE-TDD (SC-FDMA, 1 RB, 10 MHz, QPSK) LTE-TDD (SC-FDMA, 1 RB, 5 MHz, QPSK) LTE-TDD (SC-FDMA, 1 RB, 3 MHz, QPSK) LTE-TDD (SC-FDMA, 1 RB, 1.4 MHz, QPSK) IEEE 802.11b WiFi 2.4 GHz (DSSS, 11 Mbps) IEEE 802.11g WiFi 2.4 GHz (DSSS/OFDM, 54 Mbps) IEEE 802.11n (HT Greeneld, 150 Mbps, 64-QAM) IEEE 802.11a/h WiFi 5 GHz (OFDM, 54 Mbps) IEEE 802.11ac WiFi (40MHz, MCS0, 90pc duty cycle)

-15.63

-15.62

-15.62 MIF(dB)

-1.62

-1.44

-1.54

-1.62

-1.62

-1.62

-1.62

-1.62

-2.02 0.12

-13.44

-3.15

-5.57 10177 10184 10187 UID 10172 10173 10174 10240 10237 10234 10231 10228 10061 10077 10427 10069 10616 Sincerely, Signature__ _________________ CompanyPerson:MandanaSalahshour Companyname:HoneywellInternationalInc Tel.:8038358190 Fax:8038358097 Email:mandana.salahshour@honeywell.com

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Power of Attorney Date: December 28, 2021 To whom it may concern, Please be notified that I, Mandana Salahshour, have designated Joey Lao of Bureau Veritas 7Layers Communications Technology (Shenzhen) Co., Ltd as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Joey Lao of Bureau Veritas 7Layers Communications Technology (Shenzhen) Co. Ltd on the matters relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. As defined in 47 CFR Ch. 1.U.S.C. 862, we further certify that neither the applicant nor any party to this application is subject to a denial to Federal benefits, including FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act. This authorization is limited to the product of as following:

FCC ID: HD5-CT45PL1N2 If you have any acknowledgement and response, please send it to Joey Lao of Bureau Veritas 7Layers Communications Technology (Shenzhen) Co., Ltd directly. Should you have any question or comment regarding this matter, please have my best attention. Sincerely yours, Mandana Salahshour Honeywell International Inc Tel: 8038358190 Fax: 8038358097 E-mail: mandana.salahshour@honeywell.com

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Federal Communications Commission 7435 Oakland Mills Road - Gate A Columbia, Maryland 21046 Date: December 6, 2021 Parts List Tune-up Procedure Schematic Diagram Subject: Request for Confidentiality FCC ID: HD5-CT45PL1N2 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days after the Grant Date of Equipment Authorizations. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, External Photos Internal Photos Test Setup Photos Mandana Salahshour Honeywell International Inc Tel: 8038358190 Fax: 8038358097 E-mail: mandana.salahshour@honeywell.com

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5505430.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Date: October 14, 2021 Declaration To whom it may concern, This is a WLAN/Bluetooth combination antenna with FCC ID:

HD5-CT45PL1N2. This WLAN/Bluetooth co-existence mechanism is to ensure that the WLAN and Bluetooth transmitters would not simultaneously operate. Therefore, WLAN and Bluetooth antenna in FCC ID: HD5-CT45PL1N2 should not be considered to be able to transmit simultaneously. Though the users can use WLAN and Bluetooth simultaneously, but the real situation is that WLAN and Bluetooth are used by time sharing and no overlap transmission. Should you have any question, please have my best attention. Sincerely yours, _______________ Mandana Salahshour Honeywell International Inc Tel: 8038358190 Fax: 8038358097 E-mail: mandana.salahshour@honeywell.com

Honeywell International Inc 9680 Old Bailes Road, Fort Mill, SC 29707 United States DTS-UNII Device Declaration Letter October 22, 2021 To whom it may concern, We have declared below featured for FCC equipment authorization, Device FCC ID: HD5-CT45PL1N2

(1) DFS Device --

Master Client without radar detection capability Client with Radar detection capability , N/A

(2) Active / Passive Scanning , ad-hoc mode access point capability Frequency Band

(MHz) Active Scanning

(the device can transmit a probe

(beacon)) Yes , Yes , Yes , Yes , No No No No passive scanning

(where the device is can listen only with no probes) No No No No Yes , Yes , Yes , Yes , Ad Hoc Mode or WIFI Direct capability Access point capability Yes , Yes , Yes , Yes , No No No No Yes , Yes , Yes , Yes , No No No No 5150-5250 5250-5350 5470-5725 5725-5850 Country code selection ability -

(3) No If yes, please explain how it was implemented: (please also help to provide detail of options for each country selection) Yes ,

(4) Meet 15.202 requirement -

Please check below:

Yes, No, A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. For client devices that have software configuration control to operate in different modes (active scanning

(5) in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. No Apply, (If apply, please help to provide explanation on it was implement, and how software Apply, was controlled) Honeywell International Inc 9680 Old Bailes Road, Fort Mill, SC 29707 United States Factory set only. ________________________ Mandana Salahshour Honeywell International Inc Tel: 8038358190 Fax: 8038358097 E-mail: mandana.salahshour@honeywell.com

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5505864.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Date: October 14, 2021 Declaration We, Honeywell International Inc, declare that the device, FCC ID:

HD5-CT45PL1N2, does not support any non-US channels in all the operational mode(s). All non-US frequencies, US 2.4G channel 12-13 and Country code selection are disabled through proprietary software and are not user changeable. Should you have any question or comment regarding this matter, please do not hesitate to contact me. Sincerely yours, _____________________ Mandana Salahshour Honeywell International Inc Tel: 8038358190 Fax: 8038358097 E-mail: mandana.salahshour@honeywell.com