FCC ID: HD5-EDA520 Mobile Computer

 

Out of the BOX ScanPal Series Make sure that your shipping box contains these items:

Front Panel Front Panel (without ngerprint identication module) D Front camera G Speaker A Scan Engine B Rear camera C Battery Latch D Battery Cover Buckle Handle E Battery Cover E Microphone F String Buckle ScanPal Series Mobile Computers EDA52-1 EDA52-0 Quick Start Guide ScanPal Mobile Computers (Model EDA52-1 or EDA52-0);

Main battery (3.8V, lithium ion battery);

10-watt power adapter;

Replaceable adapter plugs;

USB charging cable;

Quick Start Guide. A Power Indicator Scan Status LED C Touch Panel Front Panel

(with ngerprint identication module) Left Side View Right Side View Install the Main Battery If you ordered accessories for your mobile computer, verify that they are also included with the order. Be sure to keep the original packaging in case you need to return the mobile computer for service. Remarks:

Note:

End users should not arbitrarily replace the operating system with other operating systems. To update operating system installed on your device, you need to get license from the OS vendors. EDA52-1/EDA52-0 belongs to ScanPal Series EDA52-EN-QS Rev A Apr/06/2021 G Fingerprint identication module H Speaker A B Volume+

Volume-

C Scan Button D Power Button E Scan Button Replace the battery with wrong models may cause explosion. Please make sure to use and dispose the battery in accordance with local regulations. Please recycle the battery when possible. Do not dispose it as household waste. Please ensure all kits are dry when connect the mobile device or battery to external devices. Damages caused by connecting wet kits are not covered by the warranty. ScanPal comes with a battery in a separate package. Please follow the steps below to install the battery. 1. Press down the battery cover safety button to move the battery cover safety lock to the unlock position at right;

2. Open the battery cover with the battery cover buckle handle;

3. Insert the battery (Insert the non-connector side rst, then press the battery down to establish connection between the battery and the phone);

4. Press down the battery cover (Insert the non-connector side rst, then press the battery cover down) 5. Press down the battery cover safety button to move the battery cover F 2-Pin Charging Contact G USB H 6-Pin Charging Contact

(2-pin type) safety lock to the lock position at left

(6-pin type) Remarks:

Refer to the illustrated installation steps on the following page. A Scan Engine B Rear camera C Battery Latch D Battery Cover Buckle Handle E Battery Cover F String Buckle Charging / Sync Charging / Sync Suspend / Wakeup the Mobile Computer Install a Nano SIM Card Synchronous Communication 1. Connect ScanPal to the PC using the USB charging cable Charging 1. Open the USB cover at the bottom of ScanPal;

2. Connect ScanPal to the power adapter with USB charging cable;

3. Make sure the replaceable adapter plug plugged into the power adapter;

4. Connect the power adapter to the wall plug and start charging for ScanPal. Fully charge the ScanPal at least 4 hours (depending on the model) before using it for the rst time. Using the device while charging will signicantly extend the time required to fully charge. Suspend / Wakeup the Mobile Computer 1. Press the power button and then release (less than 2 seconds) 2. To wake up the device from sleep mode, press the power button and then release (less than 2 seconds) Restart the Mobile Computer Press the reset button and then release to restart ScanPal to correct conditions where an application stops responding to the system or the computer seems to be locked up. Replaceable adapter plug Power Indicator The status of power indicators in non-charging and charging process are illustrated as below:

Power adapter USB charging cable Remarks:

It's recommended to use Honeywell's peripherals, batteries, USB charging cables and power adapters. Use of any non-Honeywell peripherals, batteries, USB charging cables or power adapters may result in damage not covered by the warranty. Warnings:

Ensure all components are dry prior to placing the battery in the computer. Mating wet components may cause damage not covered by the warranty. Non-charging process Off Battery power is normal Flashing orange Battery power is low Charging process Solid green Flashing green Orange Charging complete During charging process, and the charging is about to be completed During charging process, and the battery power is still low Flashing red Battery is abnormal 1. Power off;

2. Press down the battery cover safety button to move the lock to the unlock 3. Open the battery cover with the battery cover buckle handle;

4. Pull out the battery (First open the battery connector side, then pull out the 5. Pull out card slot and insert the Nano SIM/TF card one by one, and push position at right;

battery);

the card slot into place;

6. Insert the battery;

7. Press down the battery cover;

8. Press down the battery latch and move it to the lock position at left;

9. Power on. A Nano SIM card B Micro SD card Note:

1. Only EDA 52-1 delivers this feature 2. It's recommended to use standard Nano SIM card. Using non-standard Nano SIM card may cause the network unusable and even damage the card and slot;

3. Using non-standard Nano SIM card may cause damage not covered by the warranty. USB charging cable Scan Engine Use Scan Engine Aiming Beam Technical Support Align the aiming beam with the barcodes, and adjust the angle between the beam and the barcodes to get the best results. The recommended range from the mobile computer to the barcodes is 7 to 30cm. The aiming beam gets narrower when the mobile computer gets closer to the barcodes, while it gets wider when the mobile computer gets farther from the barcodes. For information about technical support, after-sales service and mainte-

nance, please visit www.honeywellaidc.com. 1. Select Demos > Scan Demo;

2. Touch Scan on the screen or press and hold any Scan button;

3. Point the mobile computer at the bar code;

4. Adjust the aiming beam: for optimum performance, avoid reections by scanning the barcode at a slight angle. Scan the barcode to slowly move the aiming beam over the bar code;

5. The information is obtained when the barcode is successfully decoded and the mobile computer beeps. The smaller the barcodes, the closer the aiming beams should get to the barcodes The bigger the barcodes, the father the aiming beams should get to the barcodes Beam positions when scan QR Code Documentation The local version of this article is available at www.honeywellaidc.com. Patents For patent information, please refer to www.honeywellaidc.com/patents. Limited Warranty For warranty information, go to www.honeywellaidc.com/warranty_informa-

tion. Disclaimer Honeywell International Inc. (HII) reserves the right to make changes in specications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII. HII is not responsible for direct or indirect loss caused by any technical or editing errors or omissions contained in this article. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. Copyright 2021 Honeywell International Inc. All rights reserved. Website: www honeywellaidc com EDA52-ML-RS-01 (a prelim 2) Agency Models: EDA52-0, EDA52-1 ScanPal EDA52 Handheld Computer Publicly downloadable certificates are available at www.honeywellaidc.com/compliance. Les certificats tlchargeables accessibles au public sont disponibles www.honeywellaidc.com/compliance. Les certificats tlchargeables publiquement sont disponibles sur www.honeywellaidc.com/compliance. I certificati pubblicamente scaricabili sono disponibili sul sito Web www.honeywellaidc.com/compliance. Zertifikate stehen unter www.honeywellaidc.com/compliance ffentlich zum Download zur Verfgung. Hay certificados descargables disponibles pblicamente en www.honeywellaidc.com/compliance. Puede descargar los certificados de acceso pblico en www.honeywellaidc.com/compliance. Certificados disponveis ao pblico para download em:

www.honeywellaidc.com/compliance.

www.honeywellaidc.com/compliance

www.honeywellaidc.com/compliance

www.honeywellaidc.com/compliance

www.honeywellaidc.com/compliance

www.honeywellaidc.com/compliance.

www.honeywellaidc.com/compliance

. Product documentation is available at www.honeywellaidc.com. La documentation sur le produit est disponible www.honeywellaidc.com. La documentation du produit est disponible sur le site www.honeywellaidc.com. La documentazione sul prodotto disponibile sul sito www.honeywellaidc.com. Die Produktdokumentation ist unter www.honeywellaidc.com verfgbar. La documentacin del producto est disponible en www.honeywellaidc.com. La documentacin del producto est disponible en www.honeywellaidc.com. A documentao do produto est disponvel em www.honeywellaidc.com.

www.honeywellaidc.com

www.honeywellaidc.com

www.honeywellaidc.com

www.honeywellaidc.com

www.honeywellaidc.com.

www.honeywellaidc.com

Caution: Any changes or modifications made to this equipment not expressly approved by Honeywell International Inc. may void the authorization to operate this equipment.

MISE EN GARDE : Tout changement ou modification apport(e) cet quipement qui n'est pas expressment approuv(e) par Honeywell International Inc. peut annuler l'autorisation d'utiliser cet quipement.

Mise en garde : tous les changements ou les modifications apports cet quipement non expressment approuvs par Honeywell International Inc. peuvent annuler l'autorisation d'utiliser cet quipement. Attenzione: qualsiasi variazione o modifica apportata a questa apparecchiatura, non espressamente approvata da Honeywell International Inc., potrebbe annullare l'autorizzazione concessa all'utente per utilizzare l'apparecchiatura. Vorsicht: Von Honeywell International Inc. nicht ausdrcklich genehmigte Vernderungen an diesem Gert knnen dazu fhren, dass die Betriebsgenehmigung fr dieses Gert erlischt.

Precaucin: Cualquier modificacin o cambio realizado en este equipo, no expresamente aprobado por Honeywell

Precaucin: cualquier cambio o modificacin a este equipo que no est expresamente aprobado por Honeywell International Inc. International Inc., puede anular la autorizacin para utilizar este equipo. puede invalidar la autorizacin para usarlo.

Ateno: qualquer alterao ou modificao no aprovada expressamente pela Honeywell International Inc. neste equipamento poder invalidar a autorizao de oper-lo.

Honeywell International Inc.

Honeywell International Inc.

: Honeywell International Inc.

: Honeywell International Inc.

Honeywell International Inc.

5 89

. 89 5 Honeywell International Inc

For body worn operation, this device has been tested and meets the limits regarding human exposure to electromagnetic radiation set forth in related FCC, IC and CE rules. Fonctionnement prs du corps: ce dispositif a t test et s'avre conforme aux rgles et lignes directrices des normes FCC, IC et EC. 802.11 Caution: A Wireless Network Administrator should review the operating restrictions and use with a properly configured access point.

Models: EDA52-0, EDA52-1 FCC Part 15 Subpart B Class B This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. Honeywell International Inc. is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Honeywell International Inc. The correction is the responsibility of the user. Increase the separation between the equipment and receiver. Use only shielded data cables with this system. Utiliser uniquement des cbles de donnes blinds avec ce systme. Utilisez uniquement des cbles de donnes blinds avec ce systme. Utilizzare solo cavi dati schermati con questo sistema. Fr dieses System nur abgeschirmte Datenkabel verwenden. Utilice slo cables de datos blindados con este sistema. Use nicamente cables protegidos para datos con este sistema. Use somente cabos de dados blindados com este sistema.

. Models: EDA52-0, EDA52-1 Canadian Compliance This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B) /NMB-3 (B) Models: EDA52-0, EDA52-1 Conformit la rglementation canadienne Cet appareil est conforme aux normes RSS avec exemption de licence d'Industrie Canada. Son fonctionnement est assujetti aux conditions suivantes:

1. Cet appareil ne doit pas causer de brouillage prjudiciable. 2. Cet appareil doit pouvoir accepter tout brouillage reu, y compris le brouillage pouvant causer un fonctionnement indsirable. CAN ICES-3 (B) /NMB-3 (B) Models: EDA52-0, EDA52-1 802.11a Radio Precaution Statements (North America) 802.11a wireless LAN 5150 to 5250 MHz (5.15 to 5.25 GHz) (5 GHz radio channels 36 - 48) is restricted to indoor operations to reduce harmful interference to co-channel Mobile Models: EDA52-0, EDA52-1 802.11a nonc de mise en garde radio (Amrique du Nord) Mise en garde : 802.11a sans fil LAN 5150 5250 MHz (5,15 5,25 GHz) (frquences radio 36 48 de 5 GHz) est limit aux The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the EIRP limit. The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall comply with the EIRP limits specified for point-to-point and non-point-to-point operation as Satellite System (MSS) operations. appropriate. interference and/or damage to LE-LAN devices. Be advised that high-power radars are allocated as primary users (i.e., priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause Mise en garde : Le gain en puissance dantenne maximal autoris pour les priphriques dans les bandes 5725 5850 MHz doit oprations en intrieur pour rduire les interfrences nuisibles aux oprations du systme mobile par satellite (MSS) dans le mme canal. Mise en garde : Le gain en puissance dantenne maximal autoris pour les priphriques dans les bandes 5250 5350 MHz et 5470 5725 MHz doit respecter la limite EIRP respecter les limites EIRP spcifies pour les oprations point point et non point point le cas chant. Mise en garde : Sachez que les radars de haute puissance sont dsigns comme utilisateurs principaux (c.--d. utilisateurs prioritaires) des bandes 5250 5350 MHz et 5650 5850 MHz, et que ces radars peuvent causer des interfrences ou endommager les priphriques LE-LAN. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. Cet appareil et son antenne ne doivent pas tre situs ou fonctionner en conjonction avec une autre antenne ou un autre metteur, exception faites des radios intgres qui ont t testes. The County Code Selection feature is disabled for products marketed in the US/Canada. La fonction de slection de l'indicatif du pays est dsactive pour les produits commercialiss aux tats-Unis et au Canada. Model: EDA52-0, EDA52-1 Para su uso en Mxico, la operacin de este equipo est sujeta a las siguientes dos condiciones:

1. es posible que este equipo o dispositivo no cause interferencia perjudicial y. 2. este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada.. Honeywell International Inc. hereby declares that the radio equipment types, non-specific SRD (Models: EDA52-0, EDA52-1) and cellular (Model:

EDA52-1), are in compliance with the following directives:

2014/53/EU Radio Equipment 2011/65/EU RoHS (Recast) The full text of the EU declaration of conformity is available at the following internet address:

www.honeywellaidc.com/compliance. European contact:

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen The Netherlands Honeywell International Inc. dclare par la prsente que les types d'quipement radio, SRD non spcifiques (modles :

EDA52-0, EDA52-1) et cellulaires

(modle : EDA52-1) sont conformes aux directives suivantes :

quipement radio 2014/53/UE 2011/65/UE RoHS (Refonte) Le texte intgral de la dclaration de conformit de l'UE est disponible l'adresse Internet suivante :

www.honeywellaidc.com/compliance. Personne-ressource en Europe :

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen Les Pays-Bas Por meio deste documento, a Honeywell International Inc. declara que os tipos de equipamento de rdio, sem SRD especfico (modelos: EDA52-0, EDA52-1) e celular (modelo: EDA52-1), esto em conformidade com as seguintes diretivas:

Equipamento de rdio 2014/53/UE 2011/65/UE RoHS (Reformulao) O texto completo da declarao de conformidade da Unio Europeia est disponvel em www.honeywellaicd.com/

compliance. Contato na Europa:

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen Holanda Honeywell International Inc.

SRD EDA52-0, EDA52-1 EDA52-1

2014/53/EU

2011/65/EU RoHS

www.honeywellaidc.com/

compliance

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen The Netherlands Honeywell International Inc. dclare par la prsente que les types dquipements radiolectriques de faible porte non spcifiques (Modles :

EDA52-0, EDA52-1) et portables

(Modle : EDA52-1) sont conformes aux directives suivantes :

2014/53/UE quipement radio 2011/65/UE RoHS (refonte) Le texte intgral de la dclaration de conformit de lUE est disponible ladresse internet suivante:

www.honeywellaidc.com/compliance. Contact en Europe :

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen Pays-Bas Honeywell International Inc.

SRD( EDA52-0, EDA52-1) ( EDA52-1)

2014/53/EU

2011/65/EU RoHS

www.honeywellaidc.com/

compliance

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen The Netherlands Honeywell International Inc. dichiara che i tipi di apparecchiature radio, SRD

(dispositivi a corto raggio) non specifici (Modelli: EDA52-0, EDA52-1) e cellulari (Modello: EDA52-1), sono conformi alle seguenti direttive:

2014/53/UE - Apparecchiature radio RoHS 2011/65/UE (rifusione) Il testo completo della Dichiarazione di conformit UE disponibile al seguente indirizzo Internet:

www.honeywellaidc.com/compliance. Contatto in Europa:

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen Paesi Bassi Honeywell International Inc. erklrt hiermit, dass das nicht nher spezifizierte SRD

(Modelle: EDA52-0, EDA52-1) bzw. Mobilfunkgert (Modell: EDA52-1) folgende Richtlinien erfllt:

Richtlinie 2014/53/EU

(Funkanlagen) 2011/65/EU RoHS (Recast) Die vollstndige EU Konformittserklrung finden Sie im Internet unter: www.honeywellaidc.com/

compliance. Ansprechpartner Europa:

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen Niederlande Honeywell International Inc. declara que los tipos de equipo de radio, dispositivos de corto alcance (SRD) no especficos

(modelos:EDA52-0, EDA52-1) y mviles

(modelo: EDA52-1), cumplen con las directivas siguientes:

2014/53/UE sobre equipos de radio 2011/65/UE RoHS (Refundida) El texto completo de la declaracin de conformidad de la UE est disponible en la siguiente direccin de internet:

www.honeywellaidc.com/compliance. Contacto europeo:

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen Pases Bajos Honeywell International Inc. declara que los tipos de equipo de radio, SRD no especficos

(modelos: EDA52-0, EDA52-1) y celulares (modelo: EDA52-1), son conforme a las siguientes directivas:

Normativa 2014/53/UE sobre equipos radioelctricos 2011/65/UE RoHS (Reformulada) El texto completo de la declaracin de conformidad UE est disponible en la siguiente direccin de internet:

www.honeywellaidc.com/compliance. Contacto europeo:

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen Pases Bajos Honeywell International Inc.

SRD : EDA52-0, EDA52-1 :

EDA52-1

2014/53/EU

2011/65/EU RoHS ( ) EU www.honeywellaidc.com/compliance

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen The Netherlands Honeywell International Inc.

, SRD( :

EDA52-0, EDA52-1)

( : EDA52-1)

. 2014/53/EU 2011/65/EU RoHS (Recast) EU www.honeywellaidc.com/

compliance .

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen The Netherlands

& Honeywell International Inc.

( EDA52-0, EDA52-1) $

($ EDA52-1)

2014/53/*+

2011/65/EC RoHS

www.honeywellaidc.com/

compliance. 7 *:

Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen The Netherlands Honeywell

International P 8R

SRD

EDA52-1 EDA52-0

:5 5 (

EDA52-1

: 8R 2014/53 5

: (5 RoHS 2011/65

: www.honeywellaidc.com/compliance

:5 8R Honeywell Productivity Solutions BV Lagelandseweg 70 6545CG Nijmegen

United Kingdom Contact: United Kingdom Honeywell Scanning and Mobility, Honeywell House, Skimped Hill Lane, Bracknell, Berkshire, RG12 1EB Phone: +44 (0)1344921052 The equipment is intended for use throughout the European Community. Operating Frequency Ranges Model: EDA52-1 13-14 MHz (NFC): -19.45 dBA/m @10 m EIRP 2400-2483.5 MHz (PAN Bluetooth): 6.86 dBm EIRP 2400-2483.5 MHz (Bluetooth Low Energy): 6.79 dBm EIRP 2400-2483.5 MHz (WLAN IEEE 802.11b/g/n): 17.46 dBm EIRP 5150-5350 MHz, 5470-5725 MHz and 5725-5875 MHz (WLAN/RLAN IEEE 802.11a/n/ac): 17.93 dBm, 17.82 dBm, and 13.91 dBm (5G B4) EIRP 1710-1785 / 1805-1880 MHz (LTE Band 3, Tx/Rx): 23.21 dBm 2500-2570 / 2620-2690 MHz (LTE Band 7, Tx/Rx): 22.33 dBm 832-862 / 791-821 MHz (LTE Band 20, Tx/Rx): 24.27 dBm 1920-1980 / 2110-2170 MHz (LTE Band 1,Tx/Rx): 22.73 dBm 880-915 / 925-960 MHz (LTE Band 8, Tx/Rx): 22.15 dBm 703-748 / 758-803 MHz (LTE Band 28, Tx/Rx): 23.85 dBm 2570-2620 MHz (LTE Band 38): 22.92 dBm 2300-2400MHz (LTE Band 40): 22.64 dBm 880-915 / 925-960 MHz (UMTS 900 Band, Tx/Rx): 23.90 dBm 1920-1980 / 2110-2170 MHz (UMTS 2100 Band, Tx/Rx): 24.99 dBm 880-915 / 925-960 MHz (GSM/EGPRS GSM 900 Band, Tx/Rx): 33.71 dBm 1710-1785 / 1805-1880 MHz (GSM/EGPRS DCS 1800 Band, Tx/Rx): 30.89 dBm AZ IT RU Restrictions (Revision ERC/REC 70-03 E 2017-02, Annex 3 Band A: 2400-2483.5 MHz):

No license needed if used indoor and power not exceeding 30 mW. The public use is subject to general authorization by the respective service provider. SRD with FHSS modulation Maximum 2.5 mW EIRP. Maximum 100 mW EIRP. Permitted for use SRD for outdoor applications without restriction on installation height only for purposes of gathering telemetry information for automated monitoring and resources accounting systems. Permitted to use SRD for other purposes for outdoor applications only when the installation height is not exceeding 10 m above the ground surface. Maximum 100 mW EIRP. Indoor applications SRD with DSSS and other than FHSS wideband modulation Maximum mean EIRP density is 2 mW/MHz. Maximum 100 mW EIRP. Maximum mean EIRP density is 20 mW/MHz. Maximum 100 mW EIRP. It is permitted to use SRD for outdoor applications only for purposes of gathering telemetry information for automated monitoring and resources accounting systems or security systems. Maximum mean EIRP density is 10 mW/MHz. Maximum 100 mW EIRP. Indoor applications UA EIRP =100 mW with built-in antenna with amplification factor up to 6 dBi Models: EDA52-0 13-14 MHz (NFC): -19.56 dBA/m @10 m EIRP 2400-2483.5 MHz (PAN Bluetooth): 6.86 dBm EIRP 2400-2483.5 MHz (Bluetooth Low Energy): 6.79 dBm EIRP 2400-2483.5 MHz (WLAN IEEE 802.11b/g/n): 17.46 dBm EIRP 5150-5350 MHz, 5470-5725 MHz and 5725-5875 MHz (WLAN/RLAN IEEE 802.11a/n/ac): 17.93 dBm, 17.82 dBm, and 13.91 dBm (5G B4) EIRP 802.11a/b/g/n/ac, Bluetooth and NFC European Community Restrictions: 5150-5350 MHz is for indoor use only. AT HU PT BE IS RO BG IE SK HR IT SI CY LV ES CZ LI SE DK LT CH EE LU RU FI MT RS FR NL TR DE NO UK GR PL UK(NI) Restrictions (Revision ERC/REC 70-03 E 2017-02, Annex 13 Band E1: 5150-5350 MHz, Band E2: 5470-5725 MHz):

AZ No license needed if used indoor and power not exceeding 30 mW Restrictions (Revision ERC/REC 70-03 E 2017-02, Annex 9 Band J2: 13553-13567 kHz):

Not implemented or no information. Not implemented. Not implemented. AZ BY GE RU UA Maximum magnetic field strength is +42 dBA/m at 10 m. The maximal strength of magnetic field on the distance of 10 m from a construction where the radiator is placed is 42 dBA/m. Page 1 EDA52-ML-RS-01 (a prelim 2) Lquipement est prvu pour une utilisation dans les pays de la Communaut europenne. Plages de frquences de fonctionnement :

Modle: EDA52-0 13 14 MHz (NFC): PIRE -19.56 dBA/m @10 m 2 400 2 483.5 MHz (PAN Bluetooth) : PIRE 6.86 dBm 2 400 2 483.5 MHz (Bluetooth basse nergie) : PIRE 6.79 dBm 2 400 2 483.5 MHz (WLAN IEEE 802.11b/g/n) : PIRE 17.46 dBm 5 150 5 350 MHz, 5 470 5 725 MHz et 5 725 5 850 MHz (WLAN/RLAN IEEE 802.11a/n/ac) : PIRE 17.93 dBm et 17.82 dBm et 13.91 dBm (5G B4) Modle: EDA52-1 13 14 MHz (NFC): PIRE -19.45 dBA/m @10 m 2 400 2 483.5 MHz (PAN Bluetooth) : PIRE 6.86 dBm 2 400 2 483.5 MHz (Bluetooth basse nergie) : PIRE 6.79 dBm 2 400 2 483.5 MHz (WLAN IEEE 802.11b/g/n) : PIRE 17.46 dBm 5 150 5 350 MHz, 5 470 5 725 MHz et 5725 5850 MHz (WLAN/RLAN IEEE 802.11a/n/ac) : PIRE 17.93 dBm et 17.82 dBm et 13.91 dBm (5G B4) 1 710 1 785 / 1 805-1 880 MHz (LTE bande 3, Tx/Rx): 23.21 dBm 2 500 2 570 / 2 620 2 690 MHz (LTE bande 7, Tx/Rx): 22.33 dBm 832 862 / 791 821 MHz (LTE bande 20, Tx/Rx):24.27 dBm 1 920 1980 / 2 110 2 170 MHz (LTE bande 1,Tx/Rx): 22.73 dBm 880 915 / 925 960 MHz (LTE bande 8, Tx/Rx): 23.15 dBm 703 748 / 758 803 MHz (LTE bande 28, Tx/Rx): 23.85 dBm 2 570 2 620 MHz (LTE bande 38): 22.92 dBm 2 300 2 400 MHz (LTE bande 40): 22.64 dBm 880 915 / 925 960 MHz (bande de 900 MHz pour UMTS, Tx/Rx): 23.90 dBm 1 920 1 980 / 2 110 2 170 MHz (bande de 2100 MHz pour UMTS, Tx/Rx): 24.99 dBm 880 915 / 925 960 MHz (bande de 900 MHz pour GSM/EGPRS GSM, Tx/Rx): 33.71 dBm 1 710 1 785 / 1 805 1 880 MHz (bande de 1800 MHz pour GSM/EGPRS DCS, Tx/Rx): 30.89 dBm Restrictions (rvision ERC/REC 70-03 E 2017-02, Annexe 3 bande A : 2 400 2 483,5 MHz) Aucune licence ncessaire pour une utilisation lintrieur et une puissance ne dpassant pas 30 mW. Lusage public est soumis une autorisation gnrale du fournisseur de service respectif. Appareil de faible porte (SRD) avec modulation FHSS Puissance isotrope rayonne quivalente (PIRE) maximale 2,5 mW. Puissance isotrope rayonne quivalente (PIRE) maximale 100 mW. Lusage du SRD est autoris pour les applications extrieures sans restriction de hauteur dinstallation et uniquement des fins de collecte de donnes de tlmtrie pour la surveillance automatise et les systmes de comptabilit des ressources. Lusage du SRD est autoris dautres fins pour les applications extrieures uniquement lorsque la hauteur dinstallation ne dpasse pas les 10 m au-dessus de la surface du sol. Puissance isotrope rayonne quivalente (PIRE) maximale 100 mW. Applications lintrieur SRD avec DSSS et une technique autre que la modulation FHSS large bande La densit de PIRE moyenne maximale est de 2 mW/MHz. Puissance isotrope rayonne quivalente (PIRE) maximale 100 mW.. La densit de PIRE moyenne maximale est de 20 mW/MHz. Puissance isotrope rayonne quivalente (PIRE) maximale 100 mW. Il est permis dutiliser le SRD pour les applications extrieures uniquement aux fins de la collecte de donnes de tlmtrie pour la surveillance automatise et les systmes de comptabilit des ressources ou les systmes de scurit. La densit de PIRE moyenne maximale est de 10 mW/MHz. Puissance isotrope rayonne quivalente (PIRE) maximale 100 mW. Applications lintrieur UA PIRE = 100 mW avec une antenne intgre dote dun facteur damplification jusqu 6 dBi Das Gert kann innerhalb der gesamten Europischen Gemeinschaft verwendet werden. Betriebsfrequenzbereiche:

Modelle: EDA52-0 1314 MHz (NFC): -19.56 dBA/m @10 m EIRP 24002483.5 MHz (PAN Bluetooth): 6.86 dBm EIRP 24002483.5 MHz (Bluetooth Low Energy): 6.79 dBm EIRP 24002483.5 MHz (WLAN IEEE 802.11b/g/n): 17.46 dBm EIRP 51505350 MHz, 5470-5725 MHz und 57255850 MHz (WLAN/RLAN IEEE 802.11a/n/ac): 17.93 dBm, 17.82 dBm und 13.91 dBm (5G B4) Modelle: EDA52-1 1314 MHz (NFC): -19.45 dBA/m @10 m EIRP 24002483.5 MHz (PAN Bluetooth): 6.86 dBm EIRP 24002483.5 MHz (Bluetooth Low Energy): 6.79 dBm EIRP 24002483.5 MHz (WLAN IEEE 802.11b/g/n): 17.46 dBm EIRP 51505350 MHz, 54705725 MHz und 57255850 MHz (WLAN/RLAN IEEE 802.11a/n/ac): 17.93 dBm, 17.82 dBm und 13.91 dBm (5G B4) EIRP 17101785 / 18051880 MHz (LTE Band 3, Tx/Rx): 23.21 dBm 25002570 / 26202690 MHz (LTE Band 7, Tx/Rx): 22.33 dBm 832862 / 791821 MHz (LTE Band 20, Tx/Rx): 24.27 dBm 19201980 / 21102170 MHz (LTE Band 1,Tx/Rx): 22.73 dBm 880915 / 925960 MHz (LTE Band 8, Tx/Rx): 23.15 dBm 703748 / 758803 MHz (LTE Band 28, Tx/Rx): 23.85 dBm 25702620 MHz (LTE Band 38): 22.92 dBm 23002400MHz (LTE Band 40): 22.64 dBm 880915 / 925960 MHz (UMTS 900-Band, Tx/Rx): 23.90 dBm 19201980 / 21102170 MHz (UMTS 2100-Band, Tx/Rx): 24.99 dBm 880915 / 925960 MHz (GSM/EGPRS GSM 900-Band, Tx/Rx): 33.71 dBm 17101785 / 18051880 MHz (GSM/EGPRS DCS-1800 Band, Tx/Rx): 30.89 dBm Einschrnkungen (Revision ERC/REC 70-03 E 2017-02, Anhang 3 Band A: 24002483,5 MHz) Bei einer Verwendung in Innenrumen und einer Leistung unter 30 mW ist keine Lizenz erforderlich. Die ffentliche Verwendung muss vom jeweiligen Dienstanbieter genehmigt werden. SRD mit FHSS-Modulation Max. 2,5 mW EIRP. Max. 100 mW EIRP. SRD im Auenbereich ohne Einschrnkungen der Montagehhe ausschlielich zur Erfassung von Telemetriedaten zur automatischen berwachung und Bestandsverfolgung zulssig. SRD im Auenbereich zu anderen Zwecken nur bei einer Montagehhe bis zu 10 m ber dem Boden zulssig. Max. 100 mW EIRP. Anwendungen im Innenbereich. SRD mit DSSS usw. (ausgenommen FHSS-Breitbandmodulation) Die max. durchschnittliche EIRP-Dichte betrgt 2 mW/MHz. Max. 100 mW EIRP. Die max. durchschnittliche EIRP-Dichte betrgt 20 mW/MHz. Max. 100 mW EIRP. SRD im Auenbereich ausschlielich zur Erfassung von Telemetriedaten zur automatischen berwachung und Bestandsverfolgung oder fr Sicherheitssysteme zulssig. Die max. durchschnittliche EIRP-Dichte betrgt 10 mW/MHz. Max. 100 mW EIRP. Anwendungen im Innenbereich. UA EIRP =100 mW mit integrierter Antenne mit Verstrkungsfaktor von bis zu 6 dBi. 8 " * .

: EDA52-0 1314 9; (NFC): EIRP -19.56 <=/ @10 24022480 9; (Bluetooth-PAN ): EIRP 6.86 < 2402-2480 9; (% Bluetooth "): EIRP 6.79 < 24122472 9; (WLAN 2.4G IEEE 802.11b/g/n): EIRP 17.46 < 51505350 9;, 5470-5725 9; 5725-5850 9; (WLAN/RLAN IEEE 802.11a/n/ac): EIRP 17.93 < 17.82 < 13.91 <

: EDA52-1 1314 9; (NFC): EIRP -19.45 <=/ @10 24022480 9; (Bluetooth-PAN ): EIRP 6.86 < 24022480 9; (% Bluetooth "): EIRP 6.79 < 24122472 9; (WLAN 2.4G IEEE 802.11b/g/n): EIRP 17.46 < 51505350 9;, 54705725 9; 57255850 9; (WLAN/RLAN IEEE 802.11a/n/ac): EIRP 17.93 < 17.82 < 13.91 < 17101785 / 18051880 9; (LTE Band 3, Tx/Rx): 23.21 < 25002570 / 26202690 9; (LTE Band 7, Tx/Rx): 22.33 < 832862 / 791821 9; (LTE Band 20, Tx/Rx): 24.27 < 19201980 / 21102170 9; (LTE Band 1,Tx/Rx): 22.73 < 880915 / 925960 9; (LTE Band 8, Tx/Rx): 23.15 < 703748 / 758803 9; (LTE Band 28, Tx/Rx): 23.85 < 25702620 9; (LTE Band 38): 22.92 < 23002400 9; (LTE Band 40): 22.64 < 880915 / 925960 9; ( UMTS 900, Tx/Rx): 23.90 < 19201980 / 21102170 9; ( UMTS 2100, Tx/Rx): 24.99 < 880915 / 925960 9; ( GSM/EGPRS GSM 900, Tx/Rx): 33.71 < 17101785 / 18051880 9; ( GSM/EGPRS DCS 1800, Tx/Rx): 30.89 <

( ERC/REC 70-03 E 2017-02, 3, A: 2400-2483,5 )

" $ 30 K . 8 $ K .

(SRD) FHSSMaximum 2.5 mW EIRP. 9$ " $ (EIRP) 2,5 . 9$ " $ (EIRP) 100 . O SRD K $

% . QK "$ SRD %

% $ , K 10 . 9$ " $ (EIRP) 100 . O

.SRD with DSSS and other than FHSS wideband modulation 9$ $ EIRP 2 /9;. 9$ " $ (EIRP) 100 9$ $ EIRP 20 /9;. 9$ " $ (EIRP) 100 . O SRD

K $ % , . 9$ $ EIRP 10 /9;. 9$ " $ (EIRP) 100 . O

. UA EIRP = 100 " 6 <. Bu donanm, Avrupa Birlii lkelerinin tmnde kullanlabilir. alma Frekans Aralklar:

Modeller: EDA52-0 13 - 14 MHz (NFC): -19.56 dBA/m @10 m EIRP 2400 - 2483.5 MHz (PAN Bluetooth): 6.86 dBm EIRP 2400 - 2483.5 MHz (Bluetooth Dk Enerji): 6.79dBm EIRP 2400 - 2483.5 MHz (WLAN IEEE 802.11b/g/n): 17.46 dBm EIRP 5150 - 5350 MHz, 5470 - 5725 MHz ve 5725 - 5850 MHz (WLAN/RLAN IEEE 802.11a/n/ac): 17.93 dBm 17.82 dBm ve 13.91 dBm (5G B4) EIRP Modeller: EDA52-1 13 - 14 MHz (NFC): -19.45 dBA/m @10 m EIRP 2400 - 2483.5 MHz (PAN Bluetooth): 6.86 dBm EIRP 2400 - 2483.5 MHz (Bluetooth Dk Enerji): 6.79 dBm EIRP 2400 - 2483.5 MHz (WLAN IEEE 802.11b/g/n): 17.46 dBm EIRP 5150 - 5350 MHz, 5470 - 5725 MHz ve 5725 - 5850 MHz (WLAN/RLAN IEEE 802.11a/n/ac): 17.93 dBm 17.82 dBm ve 13.91 dBm (5G B4) EIRP 1710 - 1785 / 1805 - 1880 MHz (LTE Bant 3, Tx/Rx): 23.21 dBm 2500 - 2570 / 2620 - 2690 MHz (LTE Bant 7, Tx/Rx): 22.33 dBm 832 - 862 / 791 - 821 MHz (LTE Bant 20, Tx/Rx): 24.27 dBm 1920 - 1980 / 2110 - 2170 MHz (LTE Bant 1,Tx/Rx): 22.73 dBm 880 - 915 / 925 - 960 MHz (LTE Bant 8, Tx/Rx): 23.15 dBm 703 - 748 / 758 - 803 MHz (LTE Bant 28, Tx/Rx): 23.85 dBm 2570 - 2620 MHz (LTE Bant 38): 22.92 dBm 2300 - 2400 MHz (LTE Bant 40): 22.64 dBm 880 - 915 / 925 - 960 MHz (UMTS 900 Bant, Tx/Rx): 23.90 dBm 1920 - 1980 / 2110 - 2170 MHz (UMTS 2100 Bant, Tx/Rx): 24.99 dBm 880 - 915 / 925 - 960 MHz (GSM/EGPRS GSM 900 Bant, Tx/Rx): 33.71 dBm 1710 - 1785 / 1805 - 1880 MHz (GSM/EGPRS DCS 1800 Bant, Tx/Rx): 30.89 dBm Kstlamalar (Revizyon ERC / REC 70-03 E 2017-02, Ek 3 Bant A: 2400 - 2483,5 MHz) mekanlarda ve 30 mW' amayan g kullanldnda lisans gerekli deildir. Kamu kullanm, ilgili hizmet salaycs tarafndan genel izne tabidir. FHSS modlasyonlu SRD Maksimum 2,5 mW EIRP. Maksimum 100 mW EIRP. Kurulum yksekliinde kstlama olmakszn d mekan uygulamalar iin SRD kullanmna yalnzca otomatik izleme ve kaynak hesaplama sistemleri iin telemetri bilgileri toplamak amacyla izin verilir. Yalnzca kurulum ykseklii zemin yzeyinden maksimum 10 m yukarda olduunda d mekan uygulamalarnda dier amalar iin SRD kullanmna izin verilir. Maksimum 100 mW EIRP. mekan uygulamalar. FHSS geni bant modlasyonu dnda DSSS'li SRD Maksimum ortalama EIRP younluu 2 mW/MHz'dir. Maksimum 100 mW EIRP. Maksimum ortalama EIRP younluu 20 mW/MHz'dir. Maksimum 100 mW EIRP. D mekan uygulamalar iin yalnzca otomatik izleme ve kaynak hesaplama sistemleri veya gvenlik sistemleri iin telemetri bilgileri toplamak amacyla SRD kullanmna izin verilir. Maksimum ortalama EIRP younluu 10 mW/MHz'dir. Maksimum 100 mW EIRP. mekan uygulamalar. UA EIRP = 100 mW, amplifikasyon faktr 6 dBi'ye kadar olan dahili anten ile. AZ IT RU AZ IT RU AZ IT RU AZ IT RU AZ BY GE RU UA AZ BY GE RU UA AZ BY GE RU UA AZ BY GE RU UA 802.11a/b/g/n/ac, Bluetooth et NFC Restrictions : la bande de frquences 5 150-5 350 MHz est limite une utilisation lintrieur uniquement. AT HU PT BE IS RO BG IE SK HR IT SI CY LV ES CZ LI SE DK LT CH EE LU RU FI MT RS FR NL TR DE NO UK GR PL UK(NI) Restrictions (rvision ERC/REC 70-03 E 2017-02, Annexe 13 bande E1 : 5 150 5 350 MHz, bande E2 : 5 470 5 725 MHz) AZ Aucune licence ncessaire pour une utilisation lintrieur et une puissance ne dpassant pas30 mW. Restrictions (rvision ERC/REC 70-03 E 2017-02, Annexe 9 bande J2 : 13 553 13 567 KHz) :

Non applicable ou aucune information. Non applicable. Non applicable. Lintensit maximale du champ magntique est +42 dBA/m 10 m. Lintensit maximale du champ magntique une distance de 10 m dune construction dans laquelle le radiateur est plac est de 42 dBA/m. 802.11a/b/g/n/ac, Bluetooth und NFC Einschrnkungen : 51505350 MHz ist nur fr den Einsatz im Innenbereich vorgesehen. AT HU PT BE IS RO BG IE SK HR IT SI CY LV ES CZ LI SE DK LT CH EE LU RU FI MT RS FR NL TR DE NO UK GR PL UK(NI) Einschrnkungen (Revision ERC/REC 70-03 E 2017-02, Anhang 13 Band E1: 51505350 MHz, Band E2: 54705725 MHz) AZ Bei einer Verwendung in Innenrumen und einer Leistung unter 30 mW ist keine Lizenz erforderlich. Einschrnkungen (Revision ERC/REC 70-03 E 2017-02, Anhang 9 Band J2: 1355313567 kHz):

Hinweis: Diese Einschrnkung gilt nur fr NFC-Modelle. Nicht implementiert oder keine Informationen. Nicht implementiert. Nicht implementiert. Die max. magnetische Feldstrke betrgt +42 dBA/m bei 10 m. Die max. magnetische Feldstrke bei einem Abstand von 10 m von einer Konstruktion mit Radiator betrgt 42 dBA/m. 802.11a/b/g/n/ac, Bluetooth NFC 8 : 51505350 9; $ $ %. AT HU PT BE IS RO BG IE SK HR IT SI CY LV ES CZ LI SE DK LT CH EE LU RU FI MT RS FR NL TR DE NO UK GR PL UK(NI)

( ERC/REC 70-03 E 2017-02, 13, E1: 5150-5350 , E2: 5470-

5725 ) AZ

" $ 30 K .

( ERC/REC 70-03 E 2017-02, 9 J2: 13553-13567 ):

!. " NFC.

& $ . 9$ +42 <=/ 10 . 9$ 10 42 <=/. 802.11a/b/g/n/ac, Bluetooth ve NFC Kstlamalar: 5150-5350 MHz sadece kapal alanda kullanm iindir. AT HU PT BE IS RO BG IE SK HR IT SI CY LV ES CZ LI SE DK LT CH EE LU RU FI MT RS FR NL TR DE NO UK GR PL UK(NI) Kstlamalar (Revizyon ERC / REC 70-03 E 2017-02, Ek 13 Bant E1: 5150 - 5350 MHz, Bant E2: 5470 - 5725 MHz) AZ mekanlarda ve 30 mW' amayan g kullanldnda lisans gerekli deildir. Kstlamalar (Revizyon ERC / REC 70-03 E 2017-02, Ek 9 Bant J2: 13553-13567 kHz):

Uygulanmad veya bilgi yok. Uygulanmad. Uygulanmad. Maksimum manyetik alan kuvveti 10 m'de +42 dBA/m'dir. Radyatrn yerletirildii bir yapdan 10 m mesafedeki manyetik alann azami gc 42 dBA/m'dir. Page 2 ScanPal EDA52 Handheld Computer Product Environmental Information Refer to www.honeywellaidc.com/environmental for the RoHS / REACH / WEEE information. Renseignements relatifs lenvironnement propos des produits Reportez-vous la page www.honeywellaidc.com/environmental pour obtenir des renseignements concernant les directives RoHS/REACH/

WEEE. Informations environnementales sur les produits Reportez-vous au site www.honeywellaidc.com/environmental pour obtenir les informations sur les directives RoHS/REACH/WEEE. Informazioni ambientali relative al prodotto Consultare il sito web www.honeywellaidc.com/environmental per informazioni su RoHS/REACH/

RAEE. Informationen zur Umweltvertrglichkeit von Produkten Unter www.honeywellaidc.com/environmental finden Sie Informationen ber RoHS/

REACH/WEEE. Informacin ambiental del producto Consulte www.honeywellaidc.com/environmental para obtener informacin sobre RoHS/

REACH/WEEE. Informacin ambiental de producto Consulte la informacin RoHS/REACH/

WEEE en www.honeywellaidc.com/environmental.

RoHS / REACH / WEEE www.honeywellaidc.com/environmental

www.honeywellaidc.com/

environmental RoHS / REACH /

WEEE

RoHS / REACH / WEEE

www.honeywellaidc.com/environmental

RoHS / REACH / WEEE www.honeywellaidc.com/environmental

RoHS / REACH / WEEE

www.honeywellaidc.com/environmental.

www.honeywellaidc.com/environmental Informaes ambientais sobre produtos Consulte a pgina www.honeywellaidc.com/environmental para obter informaes sobre as normas RoHS/REACH/WEEE. Models: EDA52-0, EDA52-1 USA, Canada NRTL Safety cTUVus listed: UL60950-1 2nd Edition, CSA C22.2 No. 60950-1-07 2nd Edition and UL62368-1 2nd Edition, CSA C22.2 No. 62368-1-14 2nd Edition. Warning! To prevent possible hearing damage, do not listen at high volume levels for long periods. Avertissement : A pleine puissance, lcoute prolonge peut endommager laudition de lutilisateur. Microwaves The radio in the ScanPal EDA52 RF terminal operates on the same frequency band as a microwave oven. Therefore, if you use a microwave within range of the RF terminal you may notice performance degradation in your wireless network. However, both your microwave and your wireless network will continue to function. LED Safety LEDs have been tested and classified as RISK GROUP 1 (Low Risk) to the Standard: IEC 62471:2006. Laser Compliance and Precaution This device has been tested in accordance with and complies with IEC60825-1:2014, 21 CFR 1040.10 and 1040.11, except for conformance with IEC 60825-1 Ed. 3, as described in Laser Notice No. 56, dated May 08, 2019. EDA52 devices that include a laser caution label (see far right) affixed to housing are a CLASS 2 LASER PRODUCT. This product has a maximum output of 1 mW at 630-680 nm. Caution: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Mise en garde : lutilisation de contrles ou dajustements ou de performance de procdures autres que ceux spcifies dans la prsente peut provoquer une exposition dangereuse au rayonnement.

CAUTION CLASER RADIATION DO NOT STARE INTO BEAM. CLA

-SS 2 LASER PRODUCT. RAYONNEMENT LASER NE PAS REGA

-RDER DANS LE FAISCEAU. APPAREIL LASER DE CLASSE 2. MAX. 1mW. 630-680nm. Pulse duration of 16.8mSec. IEC 60825-1:2014Comp

-lies with 21 CFR 1040. 10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3.,as described in Laser Notice No. 56, dated May 8, 2019.

CAUTION: Improper battery replacement or incompatible device usage may result in risk of burns, fire, explosion, or other hazard. Dispose of batteries according to local regulations. ATTENTION : Un remplacement inadquat de la batterie ou une utilisation incompatible de l'appareil peut prsenter des risques de brulures, d'incendie, d'explosion ou d'autres dangers. Jetez les piles en lithium-ion conformment aux rgulations locales. MISE EN GARDE : Le remplacement incorrect de la pile ou l'usage d'un appareil non compatible peut reprsenter des risques de brlures, d'incendie, d'explosion ou d'autres dangers. liminez les piles lithium-ion usages conformment aux rglementations locales.

Attenzione. La sostituzione inadeguata delle batterie o un uso incompatibile del dispositivo possono causare rischi di ustioni, incendi, esplosioni o altri pericoli. Smaltire le batterie agli ioni di litio in conformit ai regolamenti locali. VORSICHT. Ungeeignete Ersatz-

Akkus oder nicht kompatible Gertenutzung kann zu Verbrennungen, Feuer, Explosion oder anderen Gefahren fhren. Entsorgen Sie die Lithium-

Ionen-Batterien gem den lokalen Richtlinien. PRECAUCIN: El reemplazo inadecuado de la batera o el uso de un dispositivo incompatible pueden dar como resultado quemaduras, un incendio, explosin u otros riesgos. Descarte todas las bateras de litio segn las regulaciones locales.

Precaucin: El reemplazo inadecuado de la batera o el uso de un dispositivo incompatible puede presentar riesgo de quemaduras, incendio, explosin, u otro tipo de riesgos. Deseche las bateras de iones de litio de acuerdo a las normativas locales. CUIDADO: a substituio incorreta da bateria ou o uso de um dispositivo incompatvel pode resultar em riscos de queimaduras, incndio, exploso ou outros perigos. Descarte as baterias de on de ltio de acordo com as regulamentaes locais.

&#9=&#*:

. Y -%

. 5 :

89 5

.P

RF Exposure Information (SAR) This mobile phone meets the government's requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government and Canadian Government. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the government FCC/IC is 1.6 W/kg and for Europe 2 W/Kg. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Model EDA52-0 FCC SAR The highest reported FCC SAR values for head and body-worn accessory use conditions are: 0.27 W/kg (1g) and 0.67 W/kg (1g). IC SAR The highest reported IC SAR values for head and body-worn accessory use conditions are: 0.27 W/kg (1g) and 0.67 W/kg (1g). The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID/IC ID:

HD5-EDA520/1693B-EDA520 CE SAR The highest reported CE SAR value for head and body-worn accessory use conditions are: 0.13 W/kg (10 g) and 0.20 W/kg (1g). Model EDA52-0 Model EDA52-1 CE SAR The highest reported CE SAR The highest reported FCC SAR values for head, body-worn accessory and simultaneous transmission use conditions are:

0.31 W/kg (1g), 1.63 W/kg (1g), and 1.77 W/kg (1g). For body-worn operation, this device has been tested and meets the ICNIRP guidelines and the European Standard EN62209-2, for use with dedicated accessories. SAR is measured with this device at a separation of 5mm to the body. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. Informations sur l'exposition RF Ce tlphone mobile respecte les exigences du gouvernement en matire dexposition aux ondes radio. Ce tlphone est conu et fabriqu de manire ne pas dpasser les limites dmission pour lexposition lnergie de radiofrquence (RF) tablies par la Commission fdrale des communications des gouvernements amricain et canadien. La norme dexposition pour les tlphones mobiles sans fil utilise une unit de mesure connue sous le nom de dbit dabsorption spcifique ou DAS. La limite du DAS tablie par la Commission fdrale des communications FCC/IC est de 1,6W/kg et de 2W/kg pour lEurope. Bien que le DAS soit dtermin en fonction du plus haut niveau de puissance certifi, le niveau rel du DAS du tlphone en cours dutilisation peut tre nettement infrieur la valeur maximale. Ceci sexplique par le fait que le tlphone est conu pour fonctionner plusieurs niveaux de puissance ainsi que pour utiliser uniquement le puissance requis pour atteindre le rseau. En gnral, plus vous vous trouvez proximit dune antenne de station de base sans fil, plus la puissance de sortie sera faible.. Modle EDA52-0 DAS FCC Les valeurs DAS FCC les plus leves pour les conditions d'utilisation des accessoires ports sur la tte et le corps sont les suivantes:

0,27 W/kg (1g) et 0, 67 W/kg (1g). DAS IC Les valeurs DAS IC les plus leves pour les conditions d'utilisation des accessoires ports sur la tte et le corps sont les suivantes:

0,27 W/kg (1g) et 0,67 W/kg (1g).

Caution: If a body worn accessory is not purchased from Honeywell, the accessory must contain no metal and provide a 1.5 cm (0.6 in) space between the device and the body. Use of antennas and accessories not authorized may void the compliance of this product and may result in RF exposures beyond the limits established for this equipment.

Mise en garde : Si un accessoire de corps nest pas achet auprs dIntermec, cet accessoire ne doit contenir aucun mtal et garantir un espace de 1,5 cm entre lappareil et le corps. Lutilisation dantennes et daccessoires non autoriss peut annuler la conformit de cet appareil et peut causer une exposition aux RF au-del des limites tablies pour cet quipement. Hearing Aid Compatibility (HAC) Consumer Information a) This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. In the battery well of this equipment is a label that contains, among other information, a product identifier in the format US: HD5IPNANEDA52-0. If requested, this number must be provided to the telephone company. b) The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. c) Should you experience trouble with this equipment, please contact Honeywell International Inc, 13509 South Point Blvd, Ste.100, Charlotte, NC 28273, Tel: 800-782-4263 for repair or warranty information. If the equipment is causing harm to the telephone network, the telephone company may request that you dis-

connect the equipment until the problem is resolved. e) This equipment is hearing aid compatible. d) Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do not alternate or repair any parts of device except specified.

(Models) : EDA52-0, EDA52-1

(Names and Content of Hazardous Substances in the Product)

(Parts Name)

(Hazardous Substance)

(Metal parts)

(Circuit module)

(Cable assembly)

(Plastic and polymer parts)

(Optical components)

(Battery) x x o o o x o o o o o o

(Pb)

(Hg)

(Cd)

(Cr6+)

(PBB)

(PBDE) o o o o o o

o o o o o o

o o o o o o

o o o o o o

SJ/T 11364 (The table is created in accordance to SJ/T 11364.) o: GB/T 26572 (Indicates that this hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in Chinas GB/T 26572.) x: GB/T 26572 (Indicates that this hazardous substance contained in at least one of the homogeneous materials for this part is above the limit requirement in Chinas GB/T 26572.) Patents For patent information, refer to www.hsmpats.com. Brevets Veuillez consulter le site www.hsmpats.com pour obtenir des renseignements au sujet du brevet. Brevets Pour plus dinformations sur les brevets, visitez la page www.hsmpats.com. Brevetti Per i dettagli sui brevetti, fare riferimento al sito Web www.hsmpats.com. Patente Patentinformationen sind unter www.hsmpats.com erhltlich. Patentes Para obtener informacin sobre las patentes, visite www.hsmpats.com. Patentes Para obtener informacin sobre patentes, consulte www.hsmpats.com. Patentes Para obter informaes sobre patente, consulte www.hsmpats.com.

www.hsmpats.com

www.hsmpats.com

www.hsmpats.com

www.hsmpats.com

- www.hsmpats.com.

: www.hsmpats.com

. For warranty information, go to www.honeywellaidc.com and click Resources > Product Warranty. Pour obtenir des renseignements sur la garantie, rendez-vous sur www.honeywellaidc.com et cliquez sur Ressources > Garantie du produit. Pour obtenir des informations sur la garantie, rendez-vous sur www.honeywellaidc.com et cliquez sur Ressources > Garantie du produit. Per informazioni sulla garanzia, visitare www.honeywellaidc.com e fare clic su Risorse > Garanzia prodotto. Informationen zur Garantie finden Sie auf unserer Website www.honeywellaidc.com unter Ressourcen > Produkt garantie. Para obtener informacin sobre la garanta, vaya a www.honeywellaidc.com y haga clic en Recursos > Garanta del producto. Para obtener informacin sobre la garanta, visite el sitio www.honeywellaidc.com y haga clic en Recursos > Garanta del producto. Para ver informaes sobre a garantia, acesse www.honeywellaidc.com e clique em Recursos > Garantia do produto.

www.honeywellaidc.com >

www.honeywellaidc.com

www.honeywellaidc.com

www.honeywellaidc.com

www.honeywellaidc.com

www.honeywellaidc.com

. This document was prepared and executed in the English language. In the event this document is translated into another language and a conflict arises between the English version and a non-

English version, the English version shall prevail, it being recognized and acknowledged that the English language version most clearly expresses the intent of the parties. Any notice or communication given in connection with this document must include a version in the English language. Ce document a t prpar et excut dans la langue anglaise. Dans lventualit o le document serait traduit dans une autre langue et qu'un litige survenait entre la version en anglais et la version autre qu'en anglais, la version en anglais prvaudra, tant confirm et reconnu que la version en anglais exprime de faon plus prcise lintention des parties. Tout avis ou toute communication relatif ce document doit inclure une version en anglais. Ce document a t prpar et finalis en anglais. Si ce document est traduit dans une autre langue et si un conflit survient entre la version en anglais et la version traduite, la version en anglais prvaudra tant il est reconnu et tabli quelle exprime le plus clairement les intentions des parties. Tout avis ou communication produit en relation avec ce document doit comporter une version en anglais. Este documento foi preparado e feito em lngua inglesa. Se este documento for traduzido para outro idioma e surgirem conflitos entre a verso em ingls e a verso no outro idioma, a verso em ingls prevalecer, sendo reconhecido e atestado que a verso em lngua inglesa expressa mais claramente a inteno das partes. Qualquer comunicao ou aviso relacionado a este documento deve conter a verso em ingls.

Questo documento stato preparato e redatto in lingua inglese. In caso di traduzione in altre lingue, nelleventualit sorgano conflitti fra la versione non inglese e quella inglese, prevarr questultima in quanto viene riconosciuto e accettato che la versione in lingua inglese esprime pi chiaramente gli accordi fra le parti. Qualsiasi notifica o comunicazione inviata in rapporto a questo documento deve includere una versione in lingua inglese. Dieses Dokument wurde in englischer Sprache erstellt und ausgefertigt. Wenn dieses Dokument in eine andere Sprache bersetzt wird, und ein Konflikt zwischen der englischen und nicht-englischen Fassung auftritt, hat die englische Fassung Vorrang, da die Parteien anerkennen, dass die Fassung in englischer Sprache ihren Absichten am deutlichsten Ausdruck verleiht. Alle Hinweise oder Mitteilungen in Zusammenhang mit diesem Dokument mssen auch in einer Fassung in englischer Sprache erfolgen.

. Originalmente, este documento se cre y redact en ingls. En caso de que se traduzca a otro idioma y surja un conflicto entre la versin en ingls y la versin en otro idioma, prevalecer la versin en ingls. Se reconoce y admite que, en la versin en ingls, expresa la intencin de las partes con ms claridad. Cualquier aviso o comunicacin proporcionada en relacin con este documento debe incluir una versin en ingls. Este documento se prepar y redact en ingls. En caso de que se traduzca a otro idioma y surja algn conflicto entre la versin en ingls y la del idioma extranjero, prevalecer la versin en ingls, dado que se reconoce y admite que la versin en ingls expresa ms claramente la intencin de las partes. Cualquier aviso o comunicacin proporcionada en relacin con este documento deber incluir una versin en ingls.

. Page 3 Honeywell International Inc. 9680 Old Bailes Road Fort Mill, SC 29707 USA Page 4 2021 Honeywell International Inc. All rights reserved. EDA52-ML-RS-01 (a prelim 2) 5/21

 

 

 

 

 

 

 

 

 

 

R-NZ XXXXX/SDPPI/XXXX XXXX Product name:Mobile Computer Brand: Honeywell Brand Owner : Honeywell International Inc www.Honeywellaidc.com Patent: www.hsmpats.com

/ MODEL: EDA52-0

MADE IN CHINA

/Input:5V 2A

CAN ICES-3(B)/NMB-3(B) FCC ID: HD5-EDA520 US: XXXXX IC: 16 9B-EDA520 9 36 IFT: XXXXXXXXXX-XXXX P/N: XXXXXXXXXX S/N: XXXXXXXXXX XXXXX-XX-XXXXX AGREE PAR LANRT MAROC Numro dagrment :XXXXXXXXXXXXXXX Date dagrment :XXXX TA XXXX/XXXX CNC ID: XXXXXX CMIIT ID: XXXXXX XXXXXXX XXXXXXX 5.0 Ghz (W52,W53):Indoor Use Only R-CMM-HWK-EDA52-0 DA 102905 XXXXXX XXXXXXXX TRA REGISTERED No:

XXXXXX DEALER No:

DA45282/15 l l e w y e n o H 2 A 1 0 E A 0 2 5 0 2 1 6 5 1 1 B R-41023736 www.bis.gov.in Material#: 50148587-001 A release 2021-XXXX Jan.22/21 50148587 50174577-001 Jiaojiao Ru Mar.15/19 LABEL,PRINTED, AGENCY EDA52 50148587 A 9 6

 

 

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: HD5-EDA520 Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Part list Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until (180 days):

External Photos / Internal Photos Test Setup Photos / User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Signature Date: 2021/04/29 Name/Title: Mandana Salahshour / Compliance Manager TEL: +1 8038358190-8190 Email: Mandana.Mobasher@honeywell.com

 

 

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Client Declaration Letter Date: Apr 29, 2021 FCC ID: HD5-EDA520 We have declared below featured for device identified as

(1) DFS Device Master,

(2) Active / Passive Scanning , ad hoc mode access point capability Client without radar detection capability, N/A Client with Radar detection capability , Frequency Band (MHz) 2412 - 2462 5180 - 5240 5260 - 5320 5500 - 5720 5745 - 5825 Client Mode Yes Yes Yes Yes Yes Ad Hoc Mode capability Yes No No No No Access point Capability Yes No No No No WiFi Direct Group Owner Yes No No No No WiFi Direct Group Client Yes No No No No

(3) Country code selection capability to end user-

Yes No If yes, pls explain how it was implemented: (pls also help to provide detail of options for each country selection)

(4) Meet Part 15.202 requirement -

No ,

* A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. Yes ,

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cant be modified by end user or an installer. Apply No Apply

(If apply, pls help to provide explanation on it was implement, and how software was controlled). Name: Mandana Salahshour Position: Compliance Manager Honeywell International Inc Honeywell Safety and Productivity Solutions

 

 

We state that the label of our device, FCC ID: HD5-EDA520 will be put in the The label is visible to the users as they purchase the Mobile Computer and Statement for Label Requirement Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Date: April 29, 2021 battery compartment. install the SD card. Sincerely, Name: Mandana Salahshour Position: Compliance Manager Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Rd. Fort Mill, SC 29707 United States

 

 

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Non-SDR (Software Defined Radio) Cover Letter Date: Apr 29, 2021 Refer to KDB 442812 D01 SDR apps Guide v02r03. The following six questions can be used for determining if a radio can elect to be, or must be an SDR. 1. Can the RF parameters of the device be altered through software?

Yes - go to 2. No, not an SDR Reply: Yes 2. Can third parties not permitted by the Commission through specific filings modify, configure, or load different software, or make configuration settings to operate the device or host hardware radio frequency parameters

(frequency range, modulation type, maximum output power or other radio parameters) in any other way than granted (or expected to be granted)?

Yes, must be an SDR. No - go to 3. Reply: No 3. Is the device capable of operating in any other in any other way Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com than granted, or will be, granted?

Yes, - go to 4. No - go to 5. Reply: No 4. Is this a Part 15 client Device as defined in Section 15.202 (as opposed to a master device)?

Yes, qualifies as a part 15 client devices - go to 5. No, must be an SDR. 5. Does the manufacturer elect SDR?

Yes, elects to be an SDR. This product shall be approval as a Non-SDR which is declared by No, Not an SDR Reply: No Final conclusion:

the applicant. Sign by:

Print Name: Mandana Salahshour Title: Compliance Manager

 

 

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Declaration of Authorization We Name: Honeywell International Inc Honeywell Safety and Productivity Solutions Address: 9680 Old Bailes Rd. Fort Mill, SC 29707 United States Declare that:

Name Representative of agent: Marlin Chen Agent Company name:

MRT Technology (Suzhou) Co., Ltd Address:

City:

Country Suzhou China D8 Building, Youxin Industrial Park, No.2 Tian'edang Rd., Wuzhong Economic Development Zone, is authorized to apply for Certification of the following product(s):

Product description: Mobile Computer Type designation: EDA52-0 Trademark: Honeywell FCC ID: HD5-EDA520 on our behalf. Signature:

Name/Title: Mandana Salahshour / Compliance Manager Honeywell International Inc TEL: +1 8038358190-8190 Email: Mandana.Mobasher@honeywell.com 2021-04-29