VERISHIELD - VS 332i User instructions Instrucciones de uso Mode demploi Instrues do utilizador ES FR PT BC Type - C CHARGE LEVEL Charge level LED colour 100%
GREEN *C10 0-99%
ORANGE *C10 BATTERY STATUS Battery level 100-10%
10-0%
LED [C8] colour GREEN
*A4 RED
*A5 Power Button Dose Button OVERVIEW C1 C2 C3 C4 C5 C6 C7 C8
(C) OPERATING THE HEADSET - HEADSET CONTROLS Volume Button Down Dose Indicator Power Indicator Volume Button Up C11 Microphone for voice calls Hear-Through Dial C9 Pairing Indicator Multi-Function Button C10 USB-C & Charging Indicator C1 C4 C3 C2 C5 C10 C11 C8 C7 C9 C6
(D) TEST RESULTS AND TECHNICAL DATA TESTED ACCORDING TO ANSI S3.19-1974 Frequency, Hz *D1 125 250 500 1000 2000 3150 4000 6300 8000 Mean Attenuation, dB *D2 Standard Deviation, dB *D3 x x x x xx x x x x x x x x x x x x x NRR x dB Canada Class xx Verishield is tested and approved in accordance with ANSI S3.19-1974 Standard at Michael &
Associates Inc., USA. Verishield Attenuation Data according to American National Standards Institute Specifications ANSI S3.19-1974 (in passive mode, electronics switched off) The level of noise entering a persons ear, when hearing protection is worn as directed, is closely approximated by the difference between the A-weighted environmental level and the NRR. EXAMPLE:
1. The environmental noise level at the ear is xx dB (A). 2. The NRR is xx decibels (dB). 3. The level of noise entering the ear is approximately equal to xx dB (A). CAUTION: For noise environments dominated by frequencies below 500 Hz, the C-weighted environmental noise level should be used. Improper fit of this device will reduce its effectiveness in attenuating noise. Although hearing protectors can be recommended for protection against the harmful effects of impulse noise, the Noise Reduction Rating (NRR) is based on the attenuation of continuous noise and may not be an accurate indicator of the protection attainable against impulse noise, such as gunfire. Constant or repetitive exposure to impulsive noise may lead to serious injury, including temporary or permanent deafness. The Noise Reduction Rating (NRR) calculated from the attenuation data is xx dB. Earmuffs must be properly fitted to attenuate noise effectively. Refer to instructions. NOTE: The Noise Reduction Rating is derived from testing procedures at an independent laboratory and in accordance to acceptable A.N.S.I. standards. Actual noise reduction can vary from laboratory results as labelled. Protection is maximized when: proper protector is selected for application, a good training program is utilized and proper fitting techniques are followed. 2 EN User instructions PRODUCT DESCRIPTION Verishield - VS 332i The VeriShield VS 332i headset is an in-the-ear hearing protector with built-in personal sound exposure monitoring, hear through and Bluetooth for connecting to Bluetooth enabled devices, such as a mobile phone and communication radios. The headset combines a high level of noise reduction with sound amplification to allow workers to be aware of their surroundings, hear warning signals and alerts while still being protected. Headset shall be used for protection from noise, intended use of headset is solely for hearing protection and shall not be used for any other purpose. The wearer should check correct operation before use. If failure is detected, the wearer should stop using the product and refer to Honeywells advice for maintenance, power management and charging. Following features are available in the headset:
- Calibration of the dose microphones
- Fit Test, to evaluate the attenuation performance
- Dose, pick up and measurement of personal noise exposure.
- Bluetooth for connection to mobile phones and communication radios.
- Firmware upgrade
(A) CHARGING INSTRUCTIONS 1. Open the rubber lid covering the USB-C charging port - see section A. 2. Plug the charger into an USB-C outlet on the neckband - see section A. 3. Keep following temperature range during whole charging cycle: 0C to 40C/ 32F to 104F WARNING! Performance may deteriorate with battery usage. Battery lifetime will depend on temperature and activated modes. Typical expected period of continuous use: Only hear-through active - approximately xx hours. Bluetooth active - approximately xx hours. BATTERY STATUS LED *C4 Colour: *A4 GREEN, *A5 RED - see section A
(B) WEARING INSTRUCTIONS 1. Chose an eartip of the correct size. Compress the foam by rolling it into a small crease-free cylinder. 2. Fit the eartip to the earpiece. Make sure the tip fully covers the pipes. 3. Reach around your head and gently pull the ear to straighten the ear canal. 4. Push the eartip into the ear canal while gently twisting the earpiece. There is a difference between the left and the right hand side earpieces. A marking on the earpiece and cable will show you which earpiece is made for which ear. 5. Keep the eartip in place until the foam has started to expand, about 5-10 seconds. 6. The earpiece shall be inserted well into the bowl of the ear. 7. Fit the cable behind your neck. Use the slider to make sure the cable is secured in a way so that it does not get caught up during use. IMPORTANT USER INFORMATION 1. The eartips should be fitted, adjusted and maintained in accordance with the instructions. 2. The eartips should be worn at all times in noisy surroundings 3. The eartips should be regularly inspected for serviceability. 4. Clean the unit using a moist cloth. Do not use solvents or other chemicals as they may harm the unit. Do not use sharp object on any parts of the unit or its accessories. Gently tap the earpieces to dislodge dirt and foreign objects 5. Always fit the earpiece with eartips. Tips mounted to the transducer housing will protect the sound ports/pipes and prevent them from being filled with dirt or water. Dirt or water in the sound tubes will affect the system performance and may cause permanent damage to the equipment. 6. Before and after use, store in a dry, cool place. The temperature should not exceed +50C. 7. This product may be adversely affected by certain chemical substances. Further information should be sought from the manufacturer. 8. OBSOLENCE: All Honeywell thermoplastic hearing protection products will remain in good condition with regard to shelf life while the product is stored in a warehouse under controlled conditions. For Headset: Humidity less than 80%, Temperature 0C to 50C.
(C) OPERATING THE HEADSET - GETTING STARTED HEADSET CONTROLS C1 C2 C3 C4 Power Button Dose Button Dose Indicator Power Indicator GETTING STARTED Power On Power Off C5 C6 C7 C8 Hear-Through Dial Multi-Function Button Volume Button Up Volume Button Down C9 C10 C11 Pairing Indicator USB C & Charging Indicator Microphone for voice calls Hold *C1 for 3s Audio Tone and *C4 solid green 5s Audio Tone and *C4 flashes red Adjust hear-through volume Rotate dial *C5 Ambient volume +/-
Auto shut off No activity in 4 hours Audio Tone and *C4 flashes red CONNECT TO PERSONAL NOISE EXPOSURE APP Enable Bluetooth on your mobile device and ensure the mobile device is within 10m of the headset. The headset is connected through the App. Next time the headset is turned on, it will try automatically connect. CONNECT TO PERSONAL NOISE EXPOSURE APP First time pairing Finding a headset Confirm a connected headset Open the app and follow on-screen instructions Initiate from app Open the app and follow on-screen instructions. Press *C1 Once
*C4 flashing blue
*C4 solid blue 2s Clear Connected Headsets Hold *C1 10s while powering on
* C4 flashing blue, red Cancel Connection Press *C2 in connection process PERSONAL NOISE EXPOSURE MONITORING Dose safe (0-85%) Dose warning (85%-100%) Dose Alarm (Above 100%) Reset Dose Silence Dose Alarm Dose status voice message Press *C2
*C3 blinks green
*C3 blinks orange + Warning tone
*C3 blinks red + Warning tone Dose level low (0-40%) Dose level medium (41-70%) Dose level high (71-100%) Dose level too high (100+%) Hold *C2 for 5s Press *C2 On success, *C3 double flashes green + audio tone Audio tone off. *C3 flashes red and stops. FIT TEST (MAY BE ALSO ACTIVATED THROUGH THE APP) Perform Fit test Double press *C2 Repeated audio tone + Voice Feedback Fit test result: Good fit Fit test result: Poor fit Fit test result: Not available Positive audio tone + Voice Feedback Negative audio tone + Voice Feedback Voice message; Fit test not possible EN User instructions CONNECT TO EXTERNAL DEVICES, AUDIO & CALL MAKING Enable Bluetooth on your mobile device and ensure that the mobile device is within 10m of the headset. The headset must be selected in the mobile device settings. Next time the headset is turned ON, it will try to automatically pair with the last paired device. CONNECT TO EXTERNAL DEVICES First time pairing At powering on select the headset VS332i Audio in mobile settings Manual pairing Hold *C6 for 2s Clear paired device list Hold *C6 for 2s Pairing error CALL MAKING Answer incoming call End call Press *C6 Press *C6 Reject incoming call Hold *C6 3s Mute/Unmute Microphone Hold *C8 2s Unmute Press *C7
*C10 flashing blue. Paired *C10 solid blue 5s
*C10 flashing blue. Paired *C10 solid blue 5s
*C10 flashing blue. red
*C10 solid red 5s AUDIO PLAYBACK FROM PHONE Play Pause Volume Up Volume Down Press *C6 Press *C6 Press *C7 Press *C8 MAINTENANCE MAINTENANCE Firmware Over the Air (FOTA) update Factory reset Refer to mobile app for instructions Turn the device Off and remove the batteries. Press and Hold *C2 for 20s while re-inserting the batteries
*C4 flashing blue, when complete - solid blue, then off
*C4 flashing blue. Device then enters Recovery mode, *C4 solid blue Recovery mode Firmware has been updated and device is in a Recovery state
*C4 Solid blue until firmware has been updated Device Self-Check The device is completing an automatic self-
check to prevent data corruption
*C4 blinking blue until the Self-Check is complete Error State The device has encountered an error
*C3 Solid Red + *C4 Solid Red CALIBRATION The headset can be calibrated, please follow the instructions in the App Refer to mobile app for instructions
*C3 Blinking Green
*C3 Solid Green CALIBRATION Calibration in progress Calibration complete POWER MANAGEMENT POWER MANAGEMENT 5 Power On Power Low Above 10% battery life Less then 10% battery life Auto shut off After 4 hours of no activity
*C4 Solid Green
*C4 Flashing Red Audio tone
(D) TECHNICAL INFORMATION In-the-ear product. Material of neckband: PC/ABS/TPE. Material of ear piece: Metal. Replacement eartips: Contact your distributor or sales representative Material of cables: xxx. Weight: xxx g. INFORMATION ABOUT THE FREQUENCY BANDS AND POWER USED BY RADIO EQUIPMENT:
The product is equipped with Bluetooth Low Energy that operates in the frequency range 2.402 to 2.480 GHz. Maximum output power 4.0 dB . Product is Bluetooh SW5.0 compliant. Supported Bluetooth profiles are Hands Free Profile, Headset Profile, Advanced Audio Distribution Profile and Audio Video Remote Control Profile. PATENTS Patents pending. For patent information, see http://www.honeywellaidc.com/patents FCC AND INDUSTRY CANADA STATEMENTS COMPLIANCE STATEMENT VS332i complies with Part 15 of the FCC Rules and Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and Industry Canada License-exempt RSS standard(s). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help
/* MPE (SAR) CALCULATION */
This device contains radio transmitters and has been designed, and tested to meet the FCC and Industry Canada License-exempt RSS standard(s) for RF exposure and Specific Absorption Rate. To ensure that your exposure to RF energy generated by the radio transmitters does not exceed the exposure limits set forth by these guidelines, the device must be used in accordance with the supplied User Instructions. 6 EN WARRANTY: This product is covered by a one year warranty against defects in material and EN workmanship. The warranty does not cover damage caused by misuse, abuse or unauthorized modifications. Any attempt to modify or disassemble the product will void the warranty. EN DISCLAIMER: If the recommendations and directions mentioned in this user manual are not followed, the protection and function afforded by the earmuffs may be severely impaired. This may cause consequences for the user for which Honeywell Safety Products USA, Inc. shall not be responsible. Honeywell Safety Products USA, Inc. does not represent or warrant that the Product is compatible with any specific third party hardware or software other than as expressly specified by Honeywell and further does not represent or warrant that any type of warning signals including communication with other people in the surroundings can be heard and understood by the wearer of this hearing protector. The sound characteristics of the warning signals as well as of the background noise, can vary in different situations. Any attempt to modify or disassemble the product may impact noise attenuation and product functionality. Honeywell further inform the Customer that Voice communication over Bluetooth Hands Free and Headset Profile is not considered secure and can potentially be monitored by a third party within the Bluetooth radio coverage range. Customer understands and warrants that Customer has the responsibility to implement and maintain reasonable and appropriate security measures relating to the Product, the information used, and the network environment. This obligation includes complying with applicable security, cybersecurity standards, and best practices. Honeywell shall not be liable for damages caused by a Security or Cybersecurity Event resulting from Customers failure to maintain reasonable and appropriate security measures. Customer is responsible for all such damages. ES RECLAMACIN: La inobservancia de las recomendaciones y de las instrucciones indicadas en este Manual de uso la proteccin y el funcionamiento ofrecidos por las orejeras pueden verse perjudicados seriamente. Ello puede tener consecuencias negativas para el usuario, y de las cuales Honeywell Safety Products USA, Inc. no podr considerarse responsable. Honeywell Safety Products USA, Inc. no declara o garantiza que el producto es compatible con otro hardware o software especficos de terceras partes, salvo el que se haya especificado expresamente por Honeywell y que, adems, no representa o garantiza que cualquier tipo de seales de advertencia, inclusive la comunicacin con otras personas de entorno pueda orse y entenderse con el usuario de este protector auditivo. El sonido caracterstico de las seales de advertencia as como del ruido de fondo puede variar segn las situaciones. Si se intenta modificar o desmontar el producto, esto puede tener una influencia negativa en la atenuacin sonora o en el funcionamiento del producto. Adems, Honeywell quiere informar a los clientes que la comunicacin por voz a travs de las manos libres del Bluetooth y el perfil de los auriculares no debe considerarse segura del todo, por lo que puede ser monotorizada potencialmente por terceras partes dentro del rango de cobertura de la radio Bluetooth. El cliente comprende y garantiza que ste tiene la responsabilidad de implementar y mantener medidas de seguridad razonables y adecuadas para el producto, la informacin utilizada y el entorno de la red de trabajo. Dicho compromiso abarca tambin respetar la seguridad, las normas de la seguridad ciberntica y las buenas prcticas. Honeywell no se har responsables de aquellos daos causados por problemas de seguridad o de seguridad ciberntica que sean causa de que el cliente no ha sabido tomar las medidas necesarias y mantener una seguridad razonable y adecuada. Este tipo de daos son siempre responsabilidad. FR EXONRATION DE RESPONSABILITS : Si les recommandations et indications mentionnes dans ce mode demploi ne sont pas suivies, la protection et les fonctions procures par les caches-oreilles peuvent tre srieusement altres. Lutilisateur peut donc tre sujet aux consquences ultrieures affrentes, concernant lesquelles Honeywell Safety Products USA, Inc. ne sera pas responsable. Honeywell Safety Products USA, Inc. ne dclare ni ne garantit que le produit et du matriel ou un logiciel tiers spcifique soient compatibles, sauf indication expresse dHoneywell, ni ne dclare ni ne garantit que tout type de signal davertissement, notamment toute communication avec dautres personnes alentour, puisse tre entendu et comprise par le porteur de ce protecteur auditif. Les caractristiques sonores des signaux davertissement ainsi que du bruit de fond, peuvent varier en fonction des situations. Toute tentative de modifier ou de dmonter le produit, peut influer sur lattnuation du bruit et le bon fonctionnement du produit. Honeywell informe en outre le client que la communication vocale sur Bluetooth Hands Free et Headset Profile nest pas considrs tre scurise, et peut tre surveille par un tiers via la couverture radio Bluetooth. Le client sait et garantit quil est charg de prendre des mesures de scurit raisonnables concernant le produit, les informations utilises et le rseau. Cette obligation concerne le respect des normes en vigueur en matire de scurit, de cyberscurit et de principes communment accepts. Honeywell ne pourra tre tenue responsable de tout dgt caus par un problme de scurit ou de cyberscurit, rsultant du fait que le client nait pas pris les mesures de scurit raisonnables. Le client est responsable de lensemble de ce type de dgts. 7 EN The use of the WEEE Symbol indicates that this product may not be treated as Household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about The recycling of this product, please contact your local authority, your household/industrial waste disposal service provider or the shop where you purchased the product. ES El uso del smbolo RAEE (WEEE por sus siglas en ingls) indica que el producto no debe tratarse como residuos del hogar. Asegrese de que este programa se desecha correctamente y de este modo le ayudar a proteger el entorno. Para obtener informacin detallada acerca del reciclaje de este producto, pngase en contacto con la administracin local, con el proveedor de servicios de la recogida de residuos industriales/del hogar, o con el negocio donde haya comprado su producto. FR Lutilisation du symbole WEEE indique que ce produit ne peut pas tre trait titre de dchets domestiques. En veillant ce que ce produit soit correctement mis au rebut, vous contribuerez lcologie. Pour de plus amples informations sur le recyclage de ce produit, veuillez contactez les autorits locales, la compagnie de rcupration et de traitement des dchets domestiques / industriels, ou le magasin qui vous a vendu le produit. EN SPECIAL INTEREST GROUP (SIG, INC) The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Honeywell Safety Products USA, Inc. is under license. Other trademarks and trade names are those of their respective owners. ES GRUPO CON INTERESES ESPECIALES (SIG, INC) La marca denominativa Bluetooth y su logotipo son marcas registradas propiedad de Bluetooth SIG, Inc. Cualquier uso que Honeywell Safety Products USA, Inc. haga de dichas marcas, siempre lo hace con licencia. Otras marcas y nombre comerciales son propiedad de sus propietarios. FR SPECIAL INTEREST GROUP (SIG, INC) La marque Bluetooth et les logos sont des marques dposes et sont dtenus par Bluetooth SIG, Inc. et lutilisation de ces marques par Honeywell Safety Products USA, Inc. est sous licence. Les autres marques et noms commerciaux sont dtenus par leurs propritaires respectifs. 8 Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes:
1. l'appareil ne doit pas produire de brouillage, et 2. l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. 9 7