WM2726D Bluetooth CD PLL Fm Radio Micro System LOCATION OF CONTROLS Instruction manual 1. PLAY/PAUSE/M- BUTTON 2. SKIP- button 3. SKIP+ button 4. CLOCK/SLEEP BUTTON 5. FUNCTION BUTTON 6. PHONE JACK 7. Right speaker jack 8. FM antenna 9. Left speaker jack 10. DC jack 11. AUX jack 12. LCD display 13. STANDBY button 14. PLAY MODE/PROG/MEM button 15. STOP / M+ button 16. CD Door 17. CD Door open button 18. REMOTE SENSOR 19. Volume control Locations of Remote Control 1. TRANSMITTER 2. PLAY MODE BUTTON 3. POWER BUTTON 4. MEMORY BUTTON 5. STOP BUTTON 6. PLAY/PAUSE BUTTON 7. SKIP - BUTTON 8. CLOCK BUTTON 9. SLEEP BUTTON 10. SCAN BUTTON 11. BATTERY DOOR 12. PROG BUTTON 13. MUTE BUTTON 14. ST BUTTON 15. VOL BUTTON 16. SKIP + BUTTON 17. VOL + BUTTON 18. MEM + BUTTON 19. MEM BUTTON 20. FUNCTION BUTTON Unit Power Supply This unit is designed to operate on wither AC/DC adaptor. Operation with AC/DC Adaptor. Insert the small plug of adaptor into the DC Jack. Insert the AC/DC adaptor in to any convenient having AC~100-240V 50/60Hz household outlet in vertical or horizontal direction. TO SET THE CLOCK TIME In Standby offmode. 1. Press and hold the CLOCK/SLEEPBUTTON on the unit or CLOCK BUTTON on the remote, the digit 24H or 12H willblink on the display, then press SKIP+ /
SKIP- button to desired 24H / 12H, and press the CLOCK/SLEEPBUTTON on the unit or CLOCK BUTTON on the remote to confirm 2. Then press the SKIP+ / SKIP-Button to set the desired HOUR, 3. Then press theCLOCK/SLEEPBUTTON on the unit or CLOCK BUTTON on the remoteagain, the MINUTE will blink. 4. Press the SKIP+ / SKIP-Button to set desired MINUTE. 5. Press the CLOCK/SLEEPBUTTON on the unit or CLOCK BUTTON on the remote to confirm TO adjust the volume Rotate the volume control knob clockwise Or press the vol + button on remote control to increase the volume. Rotate the volume control knob anti-clockwise Or press the vol - button on remote control to decrease the volume. Check the display to confirm the volume setting. Mute function Press the mute button on remote control to mute the volume. Press it again to cancel the mute function. RADIO OPERATION 1. Press the STANDBY buttonon the unit then press the FUNCTION button repeatedly, until the frequency shown on the display OR, press the STANDBY button on the remote to turn on the unit, then press the FUNCTION button on the remote until the frequency shown on the display How to use the buttons for radio Manual Tuning Press the SKIP+ / SKIP- button to search for desired frequency. Automatic Tuning i) Press and hold the SKIP+ / SKIP- button until the display frequency starts run. ii) When a station of sufficient strength has been found Tuning will stop or you can stop the automatic tuning by pressingSKIP+ / SKIP- button. 2. To switch off the radio, press the STANDBY button on the remote once OR press the STANDBY button on the unit, until the normal time shown on the display PRESET TUNING 1. Select your desired station according to the normal tuning procedure. 2. Press the MEMORY button, P01 will appear and flash in the LCD, Then use SKIP+ /
SKIP- buttonto change the number where the station will be stored. (P01 to P20) 3. Store the current frequency by pressing MEMORY buttonagain when you get the desired number. NO.20 4. Repeat the same procedure to set other desired frequencies into Memory No.1 to Note: The unit can be preset up to 20 stations. MEMORY RECALL Recall the stored frequencies by pressing M-or M+ button to select 1 to 20 stations as desired Bluetooth mode You should follow several steps to connect your mobile phone 1. Activate Bluetooth from your mobile phone (please refer to your phones users manual) 2. Press the STANDBY BUTTON to turn on the unit, then press FUNCTION BUTTON repeatedly till bt indicator appears on LCD display. it will be ready to pair automatically. 3. Use your mobile phone to search Bluetooth device with the name of MC-030. 4. Your mobile phone will find MC-030, and will have options to connect or not. Please connect it with the password of 0000 (if any). When you successfully connect it, the Bluetooth indicator bt stop flashing on LCD display. Connecting with your phone Automatically Pairing is only needed the first time the unit and phone are used together. When the unit and phone have been paired once they will automatically connect when the unit is on and Bluetooth is activated on the phone. The next time you power on, the unit will automatically connect the latest phone that you connected. Play from Bluetooth device After successful Bluetooth connection, press the PLAY/PAUSE/M-button to play , Press SKIP -
or SKIP + button to skip the tracks backwards or forwards. To pause or resume play, press PLAY/PAUSE/M- button again . HANDING A COMPACT DISC Always protect a disc against scratches, soil , dust and etc. If a disc is treated with reasonable care, wiping off the disc with a soft cloth should be the only maintenance needed to retain its excellent sound reproduction. Discs should be retained in their original case during periods of non-use. Handle a disc only by its edges, Do not touch the surface or rainbow-colored side of the disc Handle a disc as shown in the illustrations in this section Use a soft cloth to wipe a disc clean. Do not use benzene, thinner, or other chemical cleaners to clean the disc as damage may result. A disc should always be wiped in a straight line from its center to its edge. Never wipe a disc in a circular motion. Do not expose a disc to direct sunlight, high humidity, or high temperatures for extended periods of time. Do not place the Disc on other equipment or near any heat source. Dust on the pickup lens can lead to erratic operation and interruption of the sound during play. To clean the pickup lens, open the disc compartment and blow the dust off . Using a camera lens blower(available at most camera stores) Note: Do not touch the surface of the lens. Do not allow any liquids on the inside of the product. To clean the CD player cabinet, use a soft and damp cloth to wire off the exterior surface. Never use benzol, benzene, or other strong chemical cleaners, as these could damage the finish. PLAYING A COMPACT DISC (CD) NOTE: Never touch the laser lens inside of the CD compartment. Clean the laser lens with a CD cleaner disc if it becomes dirty. 1. Press the STANDBY buttonon the unit to turn of the unit the press FUNCTION buttonrepeatedly, until the CD icon shown on the display OR, press the STANDBY button on the remote to turn on the unit, then press the FUNCTION button on the remote until the CD icon shown on the display 2. Open the CD DOOR by pressing the CD door open button and insert a CD into the tray with printed label side facing up. 3. Close the CD DOOR and the disc will rotate for a few seconds and then play automatically. 4. Use the SKIP+ / SKIP- button to choose a track 5. Press the PLAY/PAUSE/M- BUTTON again to PAUSE play. 6. Press the STOP/M+ BUTTON to STOP play. 7. To turn off the unit, press the STANDBY button on the remote once OR press the STANDBY button on the unit, until the normal time shown on the display REPEAT FUNCTION 1. Press the PLAY MODE/PROG/MEM buttononce during playback, the1 sign will show on LCD Display. The same track will be repeated over and over. 2. Press the PLAY MODE/PROG/MEM button second time to repeat all tracks. The ALL sign will show on the LCD display. 3. To cancel REPEAT PLAY, Press the PLAY MODE/PROG/MEMbutton repeatedly until the all sign disappeared. RANDOM PLAY 1. In CD Play mode, press the PLAY MODE/PROG/MEM button until RAND will appear on LCD Display. 2. Then it will enable random tracks play. 3. To cancel RANDOM PLAY, press the PLAY MODE/PROG/MEMbutton again, RAND will disappear on the display REVERSE/FORWARD 1. The CD SKIP- | and CD SKIP+| Buttons can be used to jump to a different track number or to scan disc tracks at high speed. 2. Press the CD SKIP-| button once to hear the beginning of the current track. Press it two or more times to hear previous tracks on the disc. 3. Press the CD SKIP+ | button to hear the next track on the disc. 4. Press and hold the SKIP- |Button, the current track will be scanned and move backwards to the previous track(s); When the desired track section is found, release the button and normal play will resume. 5. Press and hold the SKIP+ | Button, the current track will be scanned and move forward to the next track(s); When the desired track section is found, release the selected button and normal play will resume. PROGRAM FUNCTION The Program feature can be used to program up to 20 tracks to play in a selected order. in 1. While the PLAY MODE/PROG/MEM Button, LCD Display will show the wording PROG&P01. the stop mode only (CD is not playing), press 2. Press the SKIP+ / SKIP- button to allocate the desired track. 3. Press the PLAY MODE/PROG/MEM button to select and store the track into memory. 4. Repeat step 2 to 3 to select up to 20 tracks. 5. To play the selected tracks
(in the program mode), press the PLAY/PAUSE/M-button. The PROGappear on LCD Display. 6. Press the SKIP- button to hear the previous or press the SKIP+ button to hear next program track. Note: After all of the programmed tracks have played, the CD player will return to the stop mode. To clear the programmed tracks from memory, press STOP button until PROG disappear SLEEP FUNCTON IN STANDBY ON MODE 1. Tune in the desired radio station or CD/aux/Bluetooth play mode and adjust the volume control. 2. Press the SLEEP Button. The 90 will appear on the display. 3. Repeatedly press the SLEEP Button on remote control for desired sleep time between 90, 80, 70, 60, 50, 40, 30, 20, 10 minutes. 4. The unit will automatically switch off when the SLEEP time expires. AUX INPUT JACK 1. Press the STANDBY button to turn on the unit the press FUNCTION button repeatedly, until the AUX shown on the display. OR, press the STANDBY button on the remote to turn on the unit, then press the FUNCTION button on the remote until the AUX icon shown on the display. 2. Connect the AUX connect wire from the out jack of your Personal Player such as portable MP3 player to the AUX input jack. 3. Play Start from your Personal Player. HEADPHONE JACK This unit will accept stereo headphones with a 3.5mm plug. Before connecting the headphones set the volume to minimum level as not to damage your ears or the headphones. Connect the headphones to the headphones jack. The speakers will be automatically disconnected. Warning: Prolonged exposure to high sound levels may permanently damage your hearing. You may not hear some warning sound while wearing these headphones. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.