TALK&TALK TK2 Bluetooth Headset User Manual V4 Turning your TK2 ON & OFF-----------------------------------------------------------------
ON Press and hold the MFB Button for 3 seconds, and the Blue LED will light 1 second. The TK2 will automatically connect to the previously paired Bluetooth enabled phone. If the connecting is fail, the Blue LED will flash twice per 5 seconds. The TK2 will enter Idle mode. And it will automatically turn off if TK2 dont connect to any Bluetooth device in 4 minutes. OFF Button for 4 seconds, and the Red LED will light 1 second. Press the MFB Pairing---------------------------------------------------------------------------------------
1. In power Off Mode, Press and hold the MFB Button until you see the Blue and Red LED alternantly flash. If a Bluetooth enabled phone or others device dont connect to the TK2,then it will automatically turn OFF in 2 minutes. 2. Follow your Bluetooth enabled cell phones instructions for searching for Bluetooth device. 3. After a successful search the Bluetooth device will be shouwn on your mobile phone,chosse TALK&TALK TK2 and confirm. 4. Maybe ,your mobile will request for a password,please enter 0000 5. If its successful. TK2 will stop flashing Red LED and light 1 time per 5S. Quick Connect-------------------------------------------------------------------------------------
Press and realse the MFB button in 1 second. The TK2 will try connect to the previously paired Bluetooth enabled phone. If the connecting is fail, the Blue LED will flash twice per 5 seconds.The TK2 will enter Idle mode. Last Number Redail ------------------------------------------------------------------------------
When TK2 is paired with a Bluetooth enabled phone , Quick press twice the MFB realese it in 1 second to Redial the previously dialed the phone number on the phone. Voice Dial -----------------------------------------------------------------------------------------
button then When TK2 is paired with a Bluetooth enabled phone , Quick press the MFB button then realese it in 1 second to start-up a voice dial. If you speake a voice tag(for example a personal name) ,the phone will dial out a corresponding phone number. Answering A CALL---------------------------------------------------------------------------
When there is an incoming call ,press the MFB Reject A CALL--------------------------------------------------------------------------------
button then realese it in 1 second to anwer the call. When there is an incoming call ,press and hold the MFB End A CALL----------------------------------------------------------------------------------
button for 2 secnods to reject the call. When the TK2 is in talking or outgoing call states, press the MFB button then realese it in 1 second to end the call. Transfer Audio between Phone or TK2-------------------------------------------------------
When the TK2 is in talking states, press and hold the MFB between the phone or TK2. Controlling Volume------------------------------------------------------------------------------
button for 2 seconds to transfer audio or VOL-
buttons to adjust the volume . Press the VOL+
Charging battery----------------------------------------------------------------------------------
Plug the big connector of Micro-USB cable into your USB port of your pc or others. Then plug the small connector of Micro-USB cable into your TK2 charging socket. When you plug the USB cable for charging ,the TK2 will be Reset. But you can power-on it again in charging state. Others: It will automatically turn off if TK2 dont connect to any Bluetooth device in 3.5 minutes. min
-6 140 115 0.8
-65
-30
-82
-82 max 4 175 65 30
unit dBm khz khz khz khz dBm 2.4.2 Bluetooth RF Char. Test condition Hopping Packet Payload No. of Packet type DH1 PRBS9 on off on on Off 5 5 DH1 BS55 BS0F PRBS9 5 DH5 DH1 BS55 PRBS9 5 Off DH5 PRBS9 Average power Modulation f1 avg f2 avg f1 avg/
f2 avg Test mode TX TX TX frequency TX Single slot Multi slot Loop back Loop back ICFT Carrier drift sensitivity Funtionalities Pairing Pick Up Hang Up Reject Call Last Number Redial Transfer Audio Between Tk2 Phone and Voice Dial Voice Dial Cancel Button functionality Status Power Off Receive a ingcoming Call In-Call Mode Receive a incoming Call Standby Mode Talking mode Standby Mode Voice Dial In-Call Mode In-Call Mode Standby Volume Up Volume Down Clear Paired Phone List mark:
*MFB= Multi-Function Button
*Short Click: Click and release less than 1 second
*Long Press: Press and hold the key for 2 seconds
*Ultra Long Press: Press and hold the key for more than 5 seconds
*Double Click: Click twice within 0.5 second Action Ultra Long Press MFB Short Click MFB Short Click MFB Long Press MFB Double Click MFB Long Press MFB Short Click MFB Short Click MFB Short Click VOL+ BUTTON Short Click VOL- BUTTON Short Click VOL-,VOL+ and MFB
. TK2 STATES 1. Power-On. 2. Idle(no link phone) 3.Pairing mode 4. connected mode 5. Talking mode 6. Low Power 7 Clear paired phone list LED flash pattern LED status. Blue LED flash 1 second Blue LED flash 2 times per 5 second Blue&Red LED alternantly flash 1 time per 1 second Blue LED flash 1 time per 5 second Blued LED flash 1 time per 5 second Red LED flash 1 time per 2 second Red LED and Blue LED flash 3 times in 1 second Tone Pattern No. Event or Status Tone 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 End Power On Power Off Pairing successful Connected to Phone Pairing fail Enter Pairing Mode Last nuber redai out Incoming call Answer a call Reject a call End a call Clear paired phone list Transfer Audio between phone or Tk2 Voice dial MAX volume MIN volume Battery voltage low Disconnected to phone Incoming call from the 2nd phone Ingcoming call waiting Long Dee Long Beep Short Beep Very Long Beep Long Doo 2 Beep Short Beep Ring tone 2 Beep 2 Doo Short Beep 2 Doo Short Beep Short Beep Long Beep Long Doo 5 short Beep 2 short Beep 1 Beep 1 Beep Remark Warning:
Changes or modifications made to this device not expressly approved by HongKong AtoB Co. Ltd. may void the FCC authorization to operate this device.