WIRELESS CHARGER & PEN HOLDER REACH MADE IN CHINA User Manual BW-WC02 Thanks for choosing our Wireless Charger pen holder, please read the user manual before using
. coils Including. wireless charger pen holder USB charging cable user manual Specications. Input:DC5V/2A, 9V/1.67A. Coils Qty:2Coils Operating temperature:-10 to 60 degrees. Wireless Output:10W(Fast Charging) 7.5W(for Iphone 8 and above) 5 W(Standard Charging) Comply with: All the QI-enable devices, and have to use wireless charging receiver(not including) if the phone doesnt support wireless charger. Instruction. Please plug the Micro usb cable to the port on the back of pen holder and connect to the adapter, make sure the adapter supports fast charger, must be with output over 2A or QC 3.0. The indicator light will ash twice once its powered successfully, and it will stay in green when it is charging the mobile phone, it will turn o once the mobile phone is fully charged. 3-in-1 compact design. Portable pen holder. wireless fast charger for mobile phone. Phone holder as well. Precautions The following recommendations will help you eectively use the warranty service. Please keep the equipment dry. Rain,moisture and various water may contain minerals that will corrode the circuit. If the equipment is wet, please dry it as soon as possible or use a clean soft cloth to wipe. When charging, please select the regular production QC2.0 or QC3.0 charger. Improper use of charger or incompatible charger may present risk of instability. Do not store the equipment in a cold place.Otherwise, when the equipment temperature,moisture will be formed inside it and damage the electric appliance. Do not attempt to open the equipment, unauthorized disassemble or modication will damage equipment and wireless charging equipment related regulations. Do not throw, tap or stock the equipment,rough handling of the equipment will damage the internal circuit board and the mechanic structure. Use the clean and moist soft cloth to clean the surface of the equipment. Do not use or store the equipment in dusty or dirty places. Some components of this product are magnetic and metal material may be absorbed onto this product. Please do not use bank card,credit cards or other item with magnetic metal near the product so as to avoid losing its stored data due to damaging. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.