FCC ID: 2AC88-GLMT23A01 Revolutionary Intelligent KeyChain

KeyConnect User Manual Copyright 2023 uCloudlink All Rights Reserved 1. Wi-Fi LED Indicator 2. Battery LED Indicator 3. Hanging rope 4. Power button 5. Find item button 6. Micro USB port Function Introduction 1. Power on: Press power button for 3 seconds. 2. Power off : Press power button for 3 seconds. 3. Forced Shutdown: Press power button for 10 seconds. 4. End sleep mode: Press the power button for 1 second to turn on WiFi. 5. Mute: Press the find item button for 1 second. When searching for TagFi, the buzzer will beep three times for 1 second with an interval of 1 second LED Indicator Type Status Remarks Wi-Fi LED Indicator Green light flashing Network connecting Green light on Red light on Battery LED Indicator Green light on Orange light on Red light on Green light flashing Orange light flashing Combination light WiFi light off Battery LED Indicator on Network is normal exception Network is irrecoverable, please restart the device Battery level >50%, charging

(battery fully charged) Battery level 20%~50%

Battery level20%

Charging level >50%) Charging level50%

(battery battery Device is in sleep mode Local SIM 1. Local SIM is supported by T10, Only insert Nano-SIM card (small card). 2. Use a needle to pull out the SIM cards as shown in the picture below. Please contact customer service if any issueencountered 3. T10 device does not support SIM cards with PIN code, if you want to use this type of SIM cards, please unlock the PIN code first. Function Introduction BrandGlocalMe Model No.: GLMT23A01 Box content: device, User Manual, Micro USB cable Technical Specification:

Size: 84*46*9.2mm LTE FDD: B1/2/3/5/8/12/13/17/18/19/20/25/26/28 Wi-Fi: IEEE802. 11b/g/n Micro USB (Input) Battery Capacity: 960 mAh(TYP) Power Input: DC 5V 500mAh Quick Start Guide 1. Turn On T10 Press and hold the power button for 3 seconds .(if you cannot turn on the new T10, please charge the device and wait for device to be fully charged). Once the light of Wi-Fi stays on, it means your device is ready to connect. 2. Connect To Wi-Fi Find the Wi-Fi network name and password at the back of T10 On your mobile device(s) under Wi-Fi settings search for the network and connect Warning Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. The SAR limit is 1.6 watts per kilogram in countries that set the limit averaged over 1 gram of tissue and 2.0 watts per kilogram in countries that set the limit averaged over 10 grams of tissue. During testing, the device are set to their highest transmission levels in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. EU Regulatory conformance The device complies with RF specifications and when used with an accessory that contains no metal and that positions the device a minimum of 0.5 cm from the body. The SAR limit adopted is 2.0W/kg averaged over 10 grams of tissue. The highest SAR value reported for the device when properly worn on the body complies with the limit. Hereby, HONG KONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED declares that this device is in compliance with the essential requirements and other relevant provisions of Directive (RED) 2014/53/EU. FCC Regulatory conformance For body worn operation, the device complies with FCC RF exposure guidelines and when used with an accessory that contains no metal and that positions the device a minimum of 1.0 cm from the body. The SAR limit adopted by the FCC is 1.6W/kg averaged over 1 gram of tissue. The highest SAR value reported for the device when properly worn on the body complies with the limit. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause. Undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur during installation. If the device does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is suggested to try to correct the interference by the following measures:

--Reorient or relocate the receiving antenna.

--Increase the distance between the equipment and receiver.

--Connect the equipment to an outlet on a different circuit to the receiver.

--Consult the manufacturer or an experienced radio/TV technician for help. Information on the disposal and recycling of the device This symbol (with or without a solid bar) on the device, batteries (if included), and/or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter, or cable) and batteries should not be disposed of as household garbage. These items should not be disposed of as unsorted municipal waste and should be taken to a certified collection point for recycling or proper disposal. For detailed information about device or battery recycling, contact your local city office, household waste disposal service, or retail store. Disposal of the device and batteries (if included) is subject to WEEE. Directive Recast (Directive 2012/19/EU) and Battery Directive (Directive 2006/66/EC). The purpose of separating WEEE and batteries from other waste is to minimize the potential environmental impacts and human health risk of any hazardous substances that may be present. Do not disassemble or modify, do not short-circuit, do not dispose in fire, do not expose to high temperature, be disable after soaking. Do not squeeze or bump the battery. Do not continue to use if serious. CAUTION Risk of explosion if the battery is replaced by an incorrect t ype disposal of a battery into fire or a hot oven, ormechanically crushing or cutting of a battery, that can result in an explosion;

leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;

a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Hong Kong uCloudlink Network Technology Limited E-mail: service@ucloudlink.com Hotline: +852 8191 2660 or +86 400 699 1314 China Facebook: GlocalMe Instagram: @GlocalMeMoments Twitter: @GlocalMeMoments YouTube: GlocalMe Address: SUITE 603, 6/F, LAWS COMMERCIAL PLAZA, 788 CHEUNG SHA WAN ROAD, KOWLOON, HONG KONG This product and related system are protected by one or more of uCloudlinks patents, details please refer to https://www.ucloudlink.com/patents Copyright 2020 uCloudlink All Rights Reserved

Label 36mm Revolutionary Intelligent KeyChain Model: GLMT23A01 FCC ID: 2AC88-GLMT23A01 Input: DC 5V 500mA 217-230958 D230023217 HONG KONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED Made in China 1 8 m m Label Location Bottom Label

RF_160, Issue 04 HONG KONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED Declaration of Authorization We Name:

Address:

HONG KONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED Suite 603, 6/F, Laws Commercial Plaza, 788 Cheung Sha Wan Road, Kowloon, Hong Kong City:

Country:

Hong Kong China Declare that:

Name Representative of agent: Well Wei Agent Company name:

Address:

Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone City:

Country Suzhou China SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd South of No. 6 Plant, No. 1, Runsheng Road, Suzhou Industrial is authorized to apply for Certification of the following product(s):

Product description: Revolutionary Intelligent KeyChain Type designation: GLMT23A01 Trademark:

FCC ID: 2AC88-GLMT23A01 GlocalMe on our behalf. Date:

City:

Name:

2024/01/17.. Hong Kong .. Zhu Tan .. Signature:

HONG KONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED Suite 603, 6/F, Laws Commercial Plaza, 788 Cheung Sha Wan Road, Kowloon, Hong Kong Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: (2AC88-

GLMT23A01). Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Part List Operational Description Tune up The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for a period of 180days:

External Photos, Internal Photos, Test Setup Photos User Manual Sincerely, _______________________ Contact Person: Zhu Tan E-mail: tanzhu7385@gmail.com Rev 11/20/07

HONGKONG UCLOUDLINK NETWORK 7 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date:

Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2AC88-GLMT23A01 HONGKONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED certifies that, as of the date of the filing of the application, Ucloudlink(America),Ltd. is our designated U.S. agent for service of process for the above referenced FCC ID. HONGKONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Ucloudlink(America),Ltd. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

FRN: 0033935479 Name: Ucloudlink (America), Ltd. Address: THE CORPORATION 119B HESTER ST NEW YORK,NY 10002 Contact Person: ZHIPING PENG Tel.: +1-877-402-7626 Email: min.li@ucloudlink.com Sincerely, Ucloudlink (America), Ltd. HONGKONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED ZHIPING PENG | ZHU TAN |

Pea 17 | Tun Uw Rev 1/26/2023

HONG KONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED Suite 603, 6/F, Laws Commercial Plaza, 788 Cheung Sha Wan Road, Kowloon, Hong Kong Request for Class II Permissive Change FCC ID2AC88-GLMT23A01 Date2024-1-18 Dear Sir/Madam, Subject: FCC Class permission change for FCC ID: 2AC88-GLMT23A01 Original Grant Date: 07/27/2023 This project is a CIIPC submission to our product: Revolutionary Intelligent KeyChain, model:

GLMT23A01, the device is identical to the previous certified except for the changes as below:

1. The charging port was changed from Mirco USB to Type C . 2. Add the GPS Device. Description Schematic Charge port Before Mirco USB After Type C GPS Before No device No change After Add Device No change Remark Check Worse Check RSE Check RSE Check Worse The test strategy reference is as follows:

Case Part 15B Part 15C Part 22/24/27/90 Part 2.1093 Thank you. Sincerely. Name: Zhu Tan Title: Certification Manager

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name HONGKONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED Address FRN Grantee Code FCC ID Suite 603, 6/F, Laws Commercial Plaza,788 Cheung Sha Wan Road, Kowloon,Hong Kong 0023928765 2AC88 2AC88-GLMT23A01 Authorized Contact Name Zhu Tan Contact Email Contact Phone tanzhu7385@gmail.com

+86-186 8897 8835 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, c) d) e) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) g) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List

[HONGKONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules.

[HONGKONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to 1.50002, as an entity producing covered equipment. Date:2024-01-17 Applicant Signature:

Print Name:

Title:

Zhu Tan Certification Manager

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database QSF27-14-04 Rev 1.1 Jan 17, 2024 Page 1 of 1 Original Issue: Jan. 4, 2021

HONG KONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED Suite 603, 6/F, Laws Commercial Plaza, 788 Cheung Sha Wan Road, Kowloon, Hong Kong Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date:06-30-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: (2AC88-GLMT23A01) HONG KONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED (Li Min) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, _________________________ Contact Person: Zhu Tan E-mail: tanzhu7385@gmail.com Rev 1/26/2023

(HONG KONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED) Suite 603, 6/F, Laws Commercial Plaza, 788 Cheung Sha Wan Road, Kowloon, Hong Kong Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 06-30-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: (2AC88-GLMT23A01) HONG KONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED (Li Min) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, __________________________ Contact Person: Zhu Tan E-mail: tanzhu7385@gmail.com Rev 1/26/2023

HONG KONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED Suite 603, 6/F, Laws Commercial Plaza, 788 Cheung Sha Wan Road, Kowloon, Hong Kong Power of Attorney Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: June 30, 2023 SUBJECT: FCC Application for (2AC88-GLMT23A01) To Whom It May Concern:

We, the undersigned, hereby authorize Neil Gao at SGS-CSTC STANDARDS TECHNICAL SERVICES (XI 'AN) CO., LTD. on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by SGS-

CSTC STANDARDS TECHNICAL SERVICES (XI 'AN) CO., LTD. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards,

(Must be signed by the person that is listed on the FCC Website) __________________________ Contact Person: Zhu Tan E-mail: tanzhu7385@gmail.com