all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Exhibit D Users Manual per 2 1033 b3 | Users Manual | 4.76 MiB | January 09 2017 | |||
1 | Cover Letter(s) | January 09 2017 | ||||||
1 | ID Label/Location Info | January 09 2017 | ||||||
1 | External Photos | January 09 2017 | ||||||
1 | Internal Photos | January 09 2017 | ||||||
1 | Test Setup Photos | January 09 2017 | ||||||
1 | Test Report | January 09 2017 |
1 | Exhibit D Users Manual per 2 1033 b3 | Users Manual | 4.76 MiB | January 09 2017 |
EN NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com and click on the support tab for this product. MEANING OF SPECIAL LANGUAGE The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:
NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no possibility of injury. CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury. WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high probability of super cial injury. Age Recommendation: Not for children under 14 years. This is not a toy. WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not attempt disassembly, use with incompatible components or augment product in any way without the approval of Horizon Hobby, LLC. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury. WARNING AGAINST COUNTERFEIT PRODUCTS: Always purchase from a Horizon Hobby, LLC authorized dealer to ensure authentic high-quality Spektrum product. Horizon Hobby, LLC disclaims all support and warranty with regards, but not limited to, compatibility and performance of counterfeit products or products claiming compatibility with DSM or Spektrum technology. NOTICE: This product is only intended for use with unmanned, hobby-grade, remote-controlled vehicles and aircraft. Horizon Hobby disclaims all liability outside of the intended purpose and will not provide warranty service related thereto. Warranty Registration Visit www.spektrumrc.com/registration today to register your product. SAFETY PRECAUTIONS Always ensure all batteries have been properly charged INSTALLING THE BATTERIES CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to national regulations. CAUTION: If using rechargeable batteries, charge only rechargeable batteries. Charging non-
rechargeable batteries may cause the batteries to burst, resulting in injury to persons and/or damage to property. prior to using the model. Always check all servos and their connections prior to each run. Never operate your model near spectators, parking areas or any other area that could result in injury to people or damage of property. Never operate your model during adverse weather conditions. Poor visibility can cause disorientation and loss of control of your model. Never point the transmitter antenna directly toward the model. The radiation pattern from the tip of the antenna is inherently low. If at any time during the operation of your model you observe any erratic or abnormal operation, immediately stop operation of your model until the cause of the problem has been ascertained and corrected. SPEKTRUM DX2E ACTIVE USER GUIDE 1 EN BATTERY LED MONITOR Solid Green Battery is good (Above 4V) Flashing Green Battery voltage is critically low. Replace batteries (below 4V) RECEIVER COMPATIBILITY The DX2E is compatible with all Spektrum DSMR and DSM2 receivers. RECEIVER CONNECTION AND IN-
STALLATION Antenna Throttle Port Steering Port Bind Plug BINDING A RECEIVER Binding is the process of programming the receiver to recognize the GUID (Globally Unique Identifier) code of a single specific transmitter. When a receiver is bound to a transmitter, the receiver will only respond to that specific transmitter. The DX2E and SR310 are bound at the factory, but if you need to rebind for any reason, please follow these steps:
1. With the receiver off, insert the bind plug into the BIND port on the receiver. 2. Power the receiver through any other port. The green LED will flash continuously, indicating the receiver is in bind mode. 3. With the steering wheel and throttle trigger in the desired preset failsafe positions (see the Failsafe section on this page for more information), press and hold the bind button and turn on the transmitter. The green LED on the front of the transmitter will flash within three seconds, indicating the transmitter is in bind mode. Release the bind button when the green LED flashes. Continue to hold the failsafe positions until the binding process is complete. TYPICAL ELECTRIC INSTALLATION Battery To Motor Bind Button Electronic Speed Control Receiver Steering Servo TYPICAL GAS INSTALLATION Receiver 4. The LED on the receiver will glow solid when the transmitter and receiver are bound. 5. Remove the bind plug and store it in a convenient place. You must rebind when:
Different failsafe positions are desired e.g., when throttle or steering reversing has been changed. Changing receiver types e.g., changing from a DSM2 receiver to DSMR receiver. Binding the receiver to a different transmitter. FAILSAFE Failsafe positions are also set during binding. In the unlikely event that the radio link is lost during use, the receiver will drive the servos to their preprogrammed failsafe positions
(normally full brakes and straight steering). If the receiver is turned on prior to turning on the transmitter, the receiver will enter failsafe mode. When the transmitter is turned on, normal control is resumed. For more information on setting the failsafe, refer to the Binding a Receiver section above. Throttle Servo Steering Servo Battery Install the Receiver in your vehicle using double-sided foam servo tape. Foam servo tape will hold the receiver in place and help isolate it from vibrations. Mount the antenna up and away from the vehicle in an antenna tube. The higher up the antenna is, the better signal it will receive. CAUTION: Do not cut the antenna. 2 SPEKTRUM DX2E ACTIVE USER GUIDE SERVO REVERSING If a right steering command does not result in the wheels turning right (and vice versa), the channel may need to be reversed. To reverse a channel, switch the position of the correlating switchN is for normal, R is for reverse. Reverse Switch Steering Reverse Switch Throttle EN THROTTLE TRIM The throttle trim dial is used to adjust the throttle trim when the throttle stick is released (neutral position). This is typically used to adjust the brakes. Rotating the dial causes the throttle trim (the throttle position at rest) to be changed. Throttle Trim Dial THROTTLE LIMITER The Throttle Limiter switch limits the throttle ouput from 50/70/100%.This is useful for limiting motor ouput on slick or loose traction tracks or to limit vehicle speeds for new drivers. Throttle limiter Switch 3-POSITION SWITCH The 3-Position Switch is used to control a third channel and is factory preset at -100%/Neutral/100%. 3 position Switch STEERING TRIM The steering trim dial is used to adjust the steering trim when the wheel is centered. Rotating the dial changes the steering trim (the steering at rest position). Normally, the steering trim is adjusted until the vehicle tracks straight. Steering Trim Dial STEERING RATE AND GAIN CONTROL Steering rate (also known as dual rate) allows on-the-fly steering travel adjustments to be made using the ST Rate dial. Steering rate limits the amount of travel of the steering servo. The steering rate cannot be greater than 100%. When the DX2E is bound to a DSMR AVC receiver, the ST RATE knob controls the sensor gain value. Turn the knob counterclockwise to reduce the gain or clockwise to increase the gain. Steering Rate Dial CHANGING THE TRAVEL ADJUST SETTINGS The travel function supports precise endpoint adjustments in each direction for the steering and throttle channels. 1. Hold the trigger in the full brake position and the steering wheel in full right position while powering on the transmitter. The LED flashes rapidly, indicating the programming mode is active. 2. Throttle End Point: Hold the trigger in the full throttle position. Turn the TH TRIM knob to adjust the full throttle end point. 3. Brake End Point: Hold the trigger in the full brake position. Turn the TH TRIM knob to adjust the full brake end point. Return the trigger to the center position. 4. Left Steering End Point: Hold the steering wheel in the full left position. Turn the ST TRIM knob to adjust the left end point. 5. Right Steering End Point: Hold the steering wheel in the full right position. Turn the ST TRIM knob to adjust the right end point. Return the steering wheel to the center position. 6. Power off the transmitter to save the travel adjust settings. The minimum Travel is 75%, and the Maximum travel is 150%. The default travel settings are 125% steering and 100% throttle. IMPORTANT: If the travel is changed on the DX2E, you must rebind and calibrate AVC Receivers. SPEKTRUM DX2E ACTIVE USER GUIDE 3 EN BLUETOOTH MODULE:
The Optional Bluetooth Module (sold separately) allows wireless access to the radio application on supported smart phones or tablets. The application displays a dashboard for a selected vehicle and allows for easy setting changes and access to model memory. 1. Make sure the transmitter is off. 2. Remove the back cover plate from the back side of transmitter by removing one screw. Tip: A small flat blade screwdriver may be used to gently pry the back cover plate off once the screw is removed. 3. Firmly seat the Bluetooth Module into the back of the DX2E and secure with the screw removed in step 2. For more information on the Bluetooth Module vist www.spektrumrc.com SPEEDOMETER MODULE:
The Optional Speedometer Module (sold separately) provides an easy-to-use, large format reading of your speed. The Speedometer module is also used to input your roll-out and pole count. IMPORTANT: The Speedometer Module requires a telemetry module or a telemetry receiver and a brushless motor sensor. 1. Make sure the transmitter is off. 2. Remove the screw installed in the DX2E transmitter case as shown. 3. Remove the cover on the top of the radio using a small flat blade screw driver to gently pry it off. 4. Firmly seat the Speedometer Module into place and secure it with the screw removed in step 2. For more information on the Speedomer Module visit www.spektrumrc.com 2. 3. 4. 4 SPEKTRUM DX2E ACTIVE USER GUIDE 2.4GHZ TROUBLESHOOTING GUIDE Problem Possible Cause Solution EN Your transmitter and receiver are too close together Move transmitter 1 to 3 meters from receiver You are around metal objects The system will not connect The receiver goes into failsafe mode a short distance away from the transmitter The model selected is not the model bound to Your transmitter was accidentally put into bind mode and is no longer bound to your receiver Check the receiver antenna to be sure it is not cut or damaged The receiver quits responding during operation Inadequate battery voltage Move to an area with less metal Check model selected and ensure you are bound to that model Rebind your transmitter and receiver Replace the receiver or contact Horizon Product Support Make sure your receiver antenna is in an antenna tube and is above the vehicle Charge batteries. Spektrum receivers require at least 3.5V to operate. An inadequate power supply can allow voltage to momentarily drop below 3.5V and cause the receiver to brown out and reconnect Check the wires and connection between the battery and receiver. Repair or replace wires and/or connectors Loose or damaged wires or connectors between battery and receiver 1-YEAR LIMITED WARRANTY What this Warranty Covers Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product purchased (the Product) will be free from defects in materials and workmanship for a period of 1 year from the date of purchase. What is Not Covered This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modi cation of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer, (vi) Product not compliant with applicable technical regulations or (vii) use that violates any applicable laws, rules, or regulations. OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASERS INTENDED USE. Purchasers Remedy Horizons sole obligation and purchasers sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASERS SOLE AND EXCLUSIVE REMEDY. Limitation of Liability HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, nal assembly, modi cation or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase. Law These terms are governed by Illinois law (without regard to con ict of law principals). This warranty gives you speci c legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice. WARRANTY SERVICES Questions, Assistance, and Services Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call the toll free telephone number referenced in the Warranty and Service Contact Information section to speak with a Product Support representative. Inspection or Services If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise SPEKTRUM DX2E ACTIVE USER GUIDE 5 EN Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://
www.horizonhobby.com/content/service-center_render-service-
center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton. NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery, please contact the appropriate Horizon Product Support of ce. Warranty Requirements For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon. WARRANTY AND SERVICE CONTACT INFORMATION Non-Warranty Service Should your service not be covered by warranty, service will be completed and payment will be required without noti cation or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without noti cation. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashiers checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizons Terms and Conditions found on our website http://www.horizonhobby.com/content/
service-center_render-service-center. ATTENTION: Horizon service is limited to Product compliant in the country of use and ownership. If received, a non-compliant Product will not be serviced. Further, the sender will be responsible for arranging return shipment of the un-serviced Product, through a carrier of the senders choice and at the senders expense. Horizon will hold non-compliant Product for a period of 60 days from noti cation, after which it will be discarded. Country of Purchase United States of America Contact Information Horizon Hobby Horizon Service Center
(Repairs and Repair Requests) servicecenter.horizonhobby.com/RequestForm/
Horizon Product Support
(Product Technical Assistance) productsupport@horizonhobby.com 877-504-0233 websales@horizonhobby.com 800-338-4639 Sales European Union Horizon Technischer Service service@horizonhobby.eu Sales: Horizon Hobby GmbH
+49 (0) 4121 2655 100 Hanskampring 9 D 22885 Barsbttel, Germany 6 SPEKTRUM DX2E ACTIVE USER GUIDE 10-15 Address 4105 Fieldstone Rd Champaign, Illinois, 61822 USA EN Antenna Separation Distance When operating your Spektrum transmitter, please be sure to maintain a separation distance of at least 5 cm between your body (excluding ngers, hands, wrists, ankles and feet) and the antenna to meet RF exposure safety requirements as determined by FCC regulations. The illustrations show the approximate 20 cm RF exposure area and typical hand placement when operating your Spektrum transmitter. 20 cm FCC INFORMATION FCC ID: BRWDX2EQ2UC FCC ID: BRWDASRX18 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modi cations not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This product contains a radio transmitter with wireless technology which has been tested and found to be compliant with the applicable regulations governing a radio transmitter in the 2.400GHz to 2.4835GHz frequency range. IC INFORMATION IC: 6157A-DX2EQ2UC IC: 6157 A-ASRX18 This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, Including interfer-
ence that may cause undesired operation of the device. COMPLIANCE INFORMATION FOR THE EUROPEAN UNION Horizon Hobby, LLC hereby declares that this product is in compliance with the essential requirements and other relevant provisions of the RED Directive. A copy of the EU Declaration of Conformity is available online at:
http://www.horizonhobby.com/content/support-render-compliance. Instructions for disposal of WEEE by users in the European Union This product must not be disposed of with other waste. Instead, it is the users responsibility to dispose of their waste equipment by handing it over to a designated collections point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city of ce, your household waste disposal service or where you purchased the product. 55223.1 SPM2335 Created: 6/2017 2017 Horizon Hobby, LLC. DSM, DSM2, DSMR, AVC, Active Vehicle Control and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. All other trademarks, service marks and logos are property of their respective owners. US 9,320,977. Other patents pending. SPEKTRUM DX2E ACTIVE USER GUIDE 7 DE HINWEIS Alle Anweisungen, Garantien und dazugehrigen Dokumente knnen ohne Ankndigung von Horizon Hobby LLC gendert werden. Eine aktuelle Version ersehen Sie bitte im Support Feld unter: http://www.horizonhobby.com ERKLRUNG DER BEGRIFFE Die folgenden Begriffe werden in der gesamten Produktliteratur verwendet, um auf unterschiedlich hohe Gefahrenrisiken beim Betrieb dieses Produkts hinzuweisen:
HINWEIS: Wenn diese Verfahren nicht korrekt befolgt werden, knnen sich mglicherweise Sachschden UND geringe oder keine Gefahr von Verletzungen ergeben. ACHTUNG: Wenn diese Verfahren nicht korrekt befolgt werden, ergeben sich wahrscheinlich Sachschden UND die Gefahr von schweren Verletzungen. WARNUNG: Wenn diese Verfahren nicht korrekt befolgt werden, ergeben sich wahrscheinlich Sachschden, Kollateralschden und schwere Verletzungen ODER mit hoher Wahrscheinlichkeit ober chliche Verletzungen. Nicht geeignet fr Kinder unter 14 Jahren. Dies ist kein Spielzeug. WARNUNG: Lesen Sie die GESAMTE Bedienungsanleitung, um sich vor dem Betrieb mit den Produktfunktionen vertraut zu machen. Wird das Produkt nicht korrekt betrieben, kann dies zu Schden am Produkt oder persnlichem Eigentum fhren oder schwere Verletzungen verursachen. Nicht geeignet fr Kinder unter 14 Jahren. Dies ist kein Spielzeug. Dies ist ein hochentwickeltes Hobby-
Produkt. Es muss mit Vorsicht und gesundem Menschenverstand betrieben werden und bentigt gewisse mechanische Grundfhigkeiten. Wird dieses Produkt nicht auf eine sichere und verantwortungsvolle Weise betrieben, kann dies zu Verletzungen oder Schden am Produkt oder anderen Sachwerten fhren. Dieses Produkt eignet sich nicht fr die Verwendung durch Kinder ohne direkte berwachung eines Erwachsenen. Verwenden Sie das Produkt nicht mit inkompatiblen Komponenten oder verndern / gebrauchen es ausserhalb der Anweisungen von Horizon Hobby. Diese Bedienungsanleitung enthlt Anweisungen fr Sicherheit, Betrieb und Wartung. Es ist unbedingt notwendig, vor Zusammenbau, Einrichtung oder Verwendung alle Anweisungen und Warnhinweise im Handbuch zu lesen und zu befolgen, damit es bestimmungsgem betrieben werden kann und Schden oder schwere Verletzungen vermieden werden. WARNUNG ZU GEFLSCHTEN PRODUKTEN: Bitte kaufen Sie Ihre Spektrum Produkte immer von einem autorisiertem Hndler um sicherzu stellen, dass Sie ein authentisches hochqualitatives original Spektrum Produkt gekauft haben. Horizon Hobby lehnt jede Untersttzung, Service oder Garantieleistung von geflschten Produkten oder Produkten ab die von sich in Anspruch nehmen kompatibel mit Spektrum oder DSM zu sein. HINWEIS: Dieses Produkt ist ausschlielich fr die Verwendung in unbemannten ferngesteuerten Fahrzeugen im Hobbybereich vorgesehen. Horizon Hobby lehnt jede Haftung und Garantieleistung ausserhalb der vorgesehen Verwendung ab. Garantieregistrierung: Registrieren Sie bitte heute Ihr Produkt unter www.spektrumrc.com/registration. SICHERHEITSHINWEISE Bitte stellen Sie vor der Nutzung des Modells sicher, dass alle EINSETZEN DER SENDERBATTERIEN ACHTUNG: Bei Ersatz des Akkus durch einen ungeeigneten Akkutyp besteht Explosionsgefahr. Entsorgen Sie aufgebrauchte Akkus nach landesrechtlichen Vorschriften. ACHTUNG: Wenn Sie wiederau adbare Batterien verwenden, laden Sie nur diese auf. Das Laden nicht wiederau adbarer Batterien kann zu Explosion fhren und dadurch Verletzungen und/oder Sachschden verursachen. Akkus vollstndig geladen sind. Prfen Sie stets alle Servos und ihre Verbindungen vor jedem Lauf. Betreiben Sie ihr Modell niemals in der Nhe von Zuschauern, Parkpltzen oder jedem anderen Ort an dem Menschen verletzt oder Eigentum beschdigt werden kann. Betreiben Sie ihr Modell niemals bei widrigen Wetterbedingungen. Schlechte Sicht kann zu Desorientierung und Kontrollverlust des Modells fhren. Zielen Sie niemals mit der Antenne direkt auf das Modell. Die Abstrahlung von der Antennenspitze ist gering. Sollten Sie zu irgendeinem beliebigen Zeitpunkt eine falsche oder abnormale Reaktion des Modells beobachten, beenden Sie sofort den Betrieb bis die Ursache dafr gefunden und korrigiert wurde. 8 SPEKTRUM DX2E ACTIVE USER GUIDE AKKUSTATUS INDIKATOR Grn Batterie ist OK (ber 4V) Grn blinkt Batteriespannung ist kritisch niedrig. Ersetzen Sie die Batterien. (unter 4 Volt) EMPFNGER KOMPATIBILITT Die DX2E ist kompatibel mit allen Spektrum DSMR und DSM2 Empfngern. EMPFNGEREINBAU UND ANSCHLSSE Antenne Anschluss Gasservo/Regler Anschluss Lenkservo Bindestecker DE BINDEN DES EMPFNGERS Binden ist der Prozess der Programmierung des Empfnger mit dem eindeutigen Signal eines spezifischen Senders
(GUID). Ist der Empfnger an den Sender gebunden, wird nur er auf die Signale des Senders reagieren. Die DX2E und der SR310 sind ab Werk gebunden. Sollten Sie diese neu binden wollen folgen Sie bitte dieses Schritten:
1. Stecken Sie mit ausgeschalteten Empfnger den Bindestecker in den Bindeanschlu des Empfngers. 2. Schalten Sie den Empfnger durch einen beliebigen anderen Anschlu ein. Die grne LED blinkt und zeigt damit den Binde Mode an. 3. Mit dem Gashebel und Lenkrad in den gewnschten Preset Failsafepositionen (siehe dazu den Abschnitt Failsafe auf dieser Seite) drcken und halten Sie den Bindeknopf gedrckt und schalten den Sender ein. Die grne LED auf der Vorderseite des Senders blinkt innerhalb von drei Sekunden und zeigt damit an, dass sich der Sender im Bindemode befindet. Lassen Sie den Knopf los wenn die grne LED blinkt. Halten Sie die Failsafepositionen bis der Bindevorgang durchgefhrt ist. TYPISCHER ELEKTROEINBAU Akku Zum Motor Bind Button Empfnger Lenkservo TYPISCHER VERBRENNEREINBAU Empfnger 4. Die LED auf dem Empfnger leuchtet und zeigt damit an, dass Sender und Empfnger gebunden sind. 5. Nehmen Sie den Bindestecker aus dem Bindeport herraus und heben ihn sorgfltig auf. Sie mssen den Bindevorgang wiederholen wenn:
Sie andere Failsafepositionen wnschen, oder wenn die Gas- oder Lenkfunktion reversiert wurden. Wechsel der Empfngers von DSM2, DSMR oder Empfnger. Sie den Empfnger an einen anderen Sender binden. FAILSAFE Die Failsafepositionen werden whrend des Bindes eingestellt. In dem unvorhergesehenden Fall, dass die RF Verbindung unterbrochen wird, fhrt der Empfnger die Servos in die vorprogrammierten Failsafepositionen. Sollte der Empfnger vor dem Sender eingeschaltet werden geht der Empfnger in den Failsafemode. Wird dann der Sender eingeschaltet haben, Sie wieder normale Kontrolle ber das Modell. Fr mehr Informationen ber das Einstellen der Faisafepositionen sehen Sie bitte im Abschnitt-Binden des Empfnger nach. Elektronischer Fahrtenregler Gasservo Lenkservo Akku Befestigen Sie den Empfnger mit doppelseitigen Schaumklebeband. Das Klebeband hlt den Empfnger in Position und schtzt ihn vor Vibrationen. Schieben Sie die Antenne in ein Antennenrhrchen und stellen dieses aufrecht. Je hher die Antenne steht, desto besser wird sie das Signal empfangen. ACHTUNG: Schneiden oder krzen Sie die Antenne nicht. SPEKTRUM DX2E ACTIVE USER GUIDE 9 DE SERVOREVERSE Sollte die Lenkbewegung nach Rechts nicht zur Folge haben, dass sich die Reifen auch nach rechts bewegen, mssen Sie den Kanal reversieren (umdrehen). Um den Kanal zu reversieren schalten Sie den dazugehrigen Schalter auf die andere Position - N steht fr Normal, R fr Reversiert. Sie knnen einen kleinen Schraubendreher nutzen um die Schalter zu bewegen. Reverseschalter Lenkung Reverseschalter Gas TRIMM DES GASKANALS Mit dieser Trimfunktion knnen Sie eine Feinjustage des Gas und Bremsservos vornehmen. Zum Beispiel ist es mglich das Standgas bei einem Auto mit Verbrennungsmotor fr die Kaltlaufphase zu erhhen um ein Absterben des Motors zu verhindern. Gastrimmung GASBEGRENZER ber den Gasbegrenzerschalter wird die Drehzahlleistung von 50/70/100 % begrenzt. Dies ist insbesondere fr die Beschrnkung der Drehzahlleistung auf glatten Strecken oder Strecken mit geringer Bodenhaftung oder zur Begrenzung der Geschwindigkeit bei neuen Fahrern ntzlich. Gasbegrenzerschalter LENKRATE UND GAINKONTROLLE Die Lenkrate (auch bekannt als Dual Rate) ermglicht es bei dem Fahren mit dem ST Rate Drehregler den Lenkausschlag einzustellen. Der ST Rate Regler limitiert dann den mglichen Lenkausschlag kann aber nicht grer als 100% gestellt werden. Ist die DX2e an einen DSMR AVC Empfnger gebunden regelt der Drehregler den Gainwert (Verstrkungswert). Drehen Sie den Drehregler gegen den Uhrzeigersinn um den Wert zu verringern und im Uhrzeigersinn um ihn zu zu erhhen. Steering Rate Dial 3-POSITIONEN-SCHALTER Der 3-Positionen-Schalter steuert einen dritten Kanal und ist ab Werk auf -100 %/Neutral/100 % eingestellt. 3-Positionen-Schalter LENKUNGSTRIMMUNG Mit dem Drehrad der Lenkungstrimmung knnen Sie die Trimmwerte nach Links und Rechts verndern. Mit diesem Drehrad knnen Sie den Geradeauslauf des Fahrzeuges einstellen. Lenktrimmung NDERN DER SERVOWEGEINSTELLUNGEN Die Servowegfunktion (Travel) untersttzt die przise Endpunkteinstellung in beide Richtungen bei dem Gas- oder Steuerkanal. 1. Halten Sie den Gashebel in der Vollbremsposition und das Lenkrad voll nach rechts eingeschlagen whrend Sie den Sender einschalten. Die LED blinkt schnell und zeigt damit den aktivierten Programmiermode an. 2. Vollgasendpunkt: Halten Sie den Gashebel in der Vollgasposition. Drehen Sie den Gastrimmknopf TH TRIM und den Vollgaspunkt einzustellen. 3. Bremspunkt: Halten Sie den Gashebel in der Vollbremsposition. Drehen Sie den Gastrimmknopf um den Vollbremspunkt einzustellen. Bringen Sie den Gashebel dann zurck in die Mittelpostion. 4. Endpunkt Lenkung Links: Halten Sie das Lenkrad voll nach links eingeschlagen. Drehen Sie den ST TRIM Knopf um den Lenkausschlag einzustellen. 5. Endpunkt Lenkung Rechts: Halten Sie das Lenkrad voll nach links eingeschlagen. Drehen Sie den ST TRIM Knopf um den Lenkausschlag einzustellen. 6. Schalten Sie den Sender aus um die Servowegeinstellungen zu speichern. Der Mindestweg ist 75% und der Maximumweg ist 150%. Der Standardweg bei der Lenkung betrg 125% und 100% bei der Gasfunktion. WICHTIG: Werden die Servowegwerte auf der DX2E gendert mssen Sie erneut binden und AVC Empfnger neu kalibrieren. 10 SPEKTRUM DX2E ACTIVE USER GUIDE DE BLUETOOTH-MODUL:
Das optionale Bluetooth-Modul (separat erhltlich) ermglicht einen drahtlosen Zugriff auf die Fernsteueranwendungen auf kompatiblen Smartphones oder Tablets. Die Anwendung enthlt ein Dashboard fr ein ausgewhltes Fahrzeug und ermglicht ein problemloses nderung der Einstellungen und den Zugriff auf den Fahrzeugspeicher. 1. Achten Sie darauf, dass der Sender ausgeschaltet ist. 2. Nehmen Sie die Abdeckung auf der Rckseite des Senders ab, indem Sie eine Schraube herausschrauben. Tipp: Mit einem kleinen, flachen Schraubenzieher knnen Sie die Abdeckung nach dem Entfernen der Schraube behutsam ffnen. 3. Setzen Sie das Bluetooth-Modul fest in die Rckseite des DX2E ein und fixieren Sie es mit der in Schritt 2 entfernten Schraube. Weitere Informationen zum Bluetooth-Modul finden Sie auf www.spektrumrc.com GESCHWINDIGKEITSMESSER-MODUL:
Das optionale Geschwindigkeitsmesser-Modul (separat erhltlich) bietet eine bedienerfreundliche und groe Geschwindigkeitsanzeige. ber das Geschwindigkeitsmesser-Modul knnen Sie zudem weitere Daten eingeben. WICHTIG: Fr den Einsatz des Geschwindigkeitsmesser-Moduls sind ein Telemetriemodul oder ein Telemetrie-Empfnger sowie ein Brushless-Motorsensor erforderlich. 1. Achten Sie darauf, dass der Sender ausgeschaltet ist. 2. Entfernen Sie die Schraube wie abgebildet vom Sendergehuse des DX2E. 3. ffnen Sie die Abdeckung am Sender behutsam mit einem kleinen, flachen Schraubenzieher und nehmen Sie sie ab. 4. Setzen Sie das Geschwindigkeitsmesser-Modul fest ein und fixieren Sie es mit der in Schritt 2 entfernten Schraube. Weitere Informationen zum Bluetooth-Modul finden Sie auf www.spektrumrc.com 2. 3. 4. SPEKTRUM DX2E ACTIVE USER GUIDE 11 DE 2.4GHZ FEHLERSUCHANLEITUNG Problem Mgliche Ursache Lsung Das System will sich nicht verbinden Sender und Empfnger stehen zu nah zusammen Sie sind von metallischen Objekten umgeben Das gewhlte Modell ist nicht das gebundene Modell Ihr Sender wurde versehentlich in den Bindemode gebracht und ist nicht lnger an den Empfnger gebunden Stellen Sie den Sender und Empfnger 2,643,96 m auseinander Gehen Sie in eine Umgebung mit weniger Metall Prfen Sie das gewhlte Modell und stellen sicher dass es gebunden ist Binden Sie Sender und Empfnger erneut Der Empfnger geht nach kurzer Distanz in den Failsafemode berprfen Sie die Empfngerantenne auf Beschdigungen oder Krzungen Nicht ausreichende Akkuspannung Der Empfnger reagiert nicht mehr Lose oder beschdigte Kabel/Verbinder zwi-
schen Akku und Empfnger Ersetzen Sie den Empfnger oder kontakten den technische Service von Horizon Hobby Stellen Sie sicher, dass sich die Antenne im Antenne-
rhrchen be ndet und berhalb des Fahrzeuges ist Laden Sie die Akkus. Spektrum Empfnger be-
ntigen mindestesn 3,5 Volt Betriebsspannung. Eine nicht ausreichende Stromversogung kann die Akkuspannung unter 3,5 Volt fallen lassen berprfen Sie die Kabel und Verbinder zwischen Akku und Empfnger. Reparieren oder ersetzen Sie Kabel oder Verbinder GARANTIE UND SERVICE INFORMATIONEN WARNUNG Ein ferngesteuertes Modell ist kein Spielzeug. Es kann, wenn es falsch eingesetzt wird, zu erheblichen Verletzungen bei Lebewesen und Beschdigungen an Sachgtern fhren. Betreiben Sie Ihr RC-Modell nur auf freien Pltzen und beachten Sie alle Hinweise der Bedienungsanleitung des Modells wie auch der Fernsteuerung. GARANTIEZEITRAUM Exklusive Garantie Horizon Hobby LLC (Horizon) garantiert, dass das gekaufte Produkt frei von Material- und Montagefehlern ist. Der Garantiezeitraum entspricht den gesetzlichen Bestimmung des Landes, in dem das Produkt erworben wurde. In Deutschland betrgt der Garantiezeitraum 6 Monate und der Gewhrleistungszeitraum 18 Monate nach dem Garantiezeitraum. EINSCHRNKUNGEN DER GARANTIE
(a) Die Garantie wird nur dem Erstkufer (Kufer) gewhrt und kann nicht bertragen werden. Der Anspruch des Kufers besteht in der Reparatur oder dem Tausch im Rahmen dieser Garantie. Die Garantie erstreckt sich ausschlielich auf Produkte, die bei einem autorisierten Horizon Hndler erworben wurden. Verkufe an dritte werden von dieser Garantie nicht gedeckt. Garantieansprche werden nur angenommen, wenn ein gltiger Kaufnachweis erbracht wird. Horizon behlt sich das Recht vor, diese Garantiebestimmungen ohne Ankndigung zu ndern oder modifizieren und widerruft dann bestehende Garantiebestimmungen.
(b) Horizon bernimmt keine Garantie fr die Verkaufbarkeit des Produktes, die Fhigkeiten und die Fitness des Verbrauchers fr einen bestimmten Einsatzzweck des Produktes. Der Kufer allein ist dafr verantwortlich, zu prfen, ob das Produkt seinen Fhigkeiten und dem vorgesehenen Einsatzzweck entspricht.
(c) Ansprche des Kufers Es liegt ausschlielich im Ermessen von Horizon, ob das Produkt, bei dem ein Garantiefall festgestellt wurde, repariert oder ausgetauscht wird. Dies sind die exklusiven Ansprche des Kufers, wenn ein Defekt festgestellt wird. Horizon behlt sich vor, alle eingesetzten Komponenten zu prfen, die in den Garantiefall einbezogen werden knnen. Die Entscheidung zur Reparatur oder zum Austausch liegt nur bei Horizon. Die Garantie schliet kosmetische Defekte oder Defekte, hervorgerufen durch hhere Gewalt, falsche Behandlung des Produktes, falscher Einsatz des Produktes, kommerziellen Einsatz oder Modifikationen irgendwelcher Art aus. Die Garantie schliet Schden, die durch falschen Einbau, falsche Handhabung, Unflle, Betrieb, Service oder Reparaturversuche, die nicht von Horizon ausgefhrt wurden aus. Rcksendungen durch den Kufer direkt an Horizon oder eine seiner Landesvertretung bedrfen der Schriftform. SCHADENSBESCHRNKUNG Horizon ist nicht fr direkte oder indirekte Folgeschden, Einkommensausflle oder kommerzielle Verluste, die in irgendeinem Zusammenhang mit dem Produkt stehen verantwortlich, unabhngig ab ein Anspruch im Zusammenhang mit einem Vertrag, der Garantie oder der Gewhrleistung erhoben werden. Horizon wird darber hinaus keine Ansprche aus einem Garantiefall akzeptieren, die ber den individuellen Wert des Produktes hinaus gehen. Horizon hat keinen Einfluss auf den Einbau, die Verwendung oder die Wartung des Produktes oder etwaiger Produktkombinationen, die vom Kufer gewhlt werden. Horizon bernimmt keine Garantie und akzeptiert keine Ansprche fr in der folge auftretende Verletzungen oder Beschdigungen. Mit der Verwendung und dem Einbau des Produktes akzeptiert der Kufer alle aufgefhrten Garantiebestimmungen ohne Einschrnkungen und Vorbehalte. Wenn Sie als Kufer nicht bereit sind, diese Bestimmungen im Zusammenhang mit der Benutzung des Produktes zu akzeptieren, werden Sie gebeten, dass Produkt in unbenutztem Zustand in der Originalverpackung vollstndig bei dem Verkufer zurckzugeben. 12 SPEKTRUM DX2E ACTIVE USER GUIDE SICHERHEITSHINWEISE Dieses ist ein hochwertiges Hobby Produkt und kein Spielzeug. Es muss mit Vorsicht und Umsicht eingesetzt werden und erfordert einige mechanische wie auch mentale Fhigkeiten. Ein Versagen, das Produkt sicher und umsichtig zu betreiben kann zu Verletzungen von Lebewesen und Sachbeschdigungen erheblichen Ausmaes fhren. Dieses Produkt ist nicht fr den Gebrauch durch Kinder ohne die Aufsicht eines Erziehungsberechtigten vorgesehen. Die Anleitung enthlt Sicherheitshinweise und Vorschriften sowie Hinweise fr die Wartung und den Betrieb des Produktes. Es ist unabdingbar, diese Hinweise vor der ersten Inbetriebnahme zu lesen und zu verstehen. Nur so kann der falsche Umgang verhindert und Unflle mit Verletzungen und Beschdigungen vermieden werden. FRAGEN, HILFE UND REPARATUREN Ihr lokaler Fachhndler und die Verkaufstelle knnen eine Garantiebeurteilung ohne Rcksprache mit Horizon nicht durchfhren. Dies gilt auch fr Garantiereparaturen. Deshalb kontaktieren Sie in einem solchen Fall den Hndler, der sich mit Horizon kurz schlieen wird, um eine sachgerechte Entscheidung zu fllen, die Ihnen schnellst mglich hilft. WARTUNG UND REPARATUR Muss Ihr Produkt gewartet oder repariert werden, wenden Sie sich entweder an Ihren Fachhndler oder direkt an Horizon. Rcksendungen / Reparaturen werden nur mit einer von Horizon vergebenen RMA Nummer bearbeitet. Diese Nummer erhalten Sie oder ihr Fachhndler vom technischen Service. Mehr Informationen dazu erhalten Sie im Serviceportal unter www. Horizonhobby.de oder telefonisch bei dem technischen Service von Horizon. Packen Sie das Produkt sorgfltig ein. Beachten Sie, dass der Originalkarton in der Regel nicht ausreicht, um DE beim Versand nicht beschdigt zu werden. Verwenden Sie einen Paketdienstleister mit einer Tracking Funktion und Versicherung, da Horizon bis zur Annahme keine Verantwortung fr den Versand des Produktes bernimmt. Bitte legen Sie dem Produkt einen Kaufbeleg bei, sowie eine ausfhrliche Fehlerbeschreibung und eine Liste aller eingesendeten Einzelkomponenten. Weiterhin bentigen wir die vollstndige Adresse, eine Telefonnummer fr Rckfragen, sowie eine Email Adresse. GARANTIE UND REPARATUREN Garantieanfragen werden nur bearbeitet, wenn ein Originalkaufbeleg von einem autorisierten Fachhndler beiliegt, aus dem der Kufer und das Kaufdatum hervorgeht. Sollte sich ein Garantiefall besttigen wird das Produkt repariert oder ersetzt. Diese Entscheidung obliegt einzig Horizon Hobby. KOSTENPFLICHTIGE REPARATUREN Liegt eine kostenpflichtige Reparatur vor, erstellen wir einen Kostenvoranschlag, den wir Ihrem Hndler bermitteln. Die Reparatur wird erst vorgenommen, wenn wir die Freigabe des Hndlers erhalten. Der Preis fr die Reparatur ist bei Ihrem Hndler zu entrichten. Bei kostenpflichtigen Reparaturen werden mindestens 30 Minuten Werkstattzeit und die Rckversandkosten in Rechnung gestellt. Sollten wir nach 90 Tagen keine Einverstndniserklrung zur Reparatur vorliegen haben, behalten wir uns vor, das Produkt zu vernichten oder anderweitig zu verwerten. ACHTUNG: Kostenpflichtige Reparaturen nehmen wir nur fr Elektronik und Motoren vor. Mechanische Reparaturen, besonders bei Hubschraubern und RC-Cars sind extrem aufwendig und mssen deshalb vom Kufer selbst vorgenommen werden. 10-15 SPEKTRUM DX2E ACTIVE USER GUIDE 13 DE GARANTIE UND SERVICE KONTAKTINFORMATIONEN Land des Kauf Horizon Hobby Telefon/E-mail Adresse Adresse Europische Union Horizon Technischer Service Sales: Horizon Hobby GmbH service@horizonhobby.eu
+49 (0) 4121 2655 100 Hanskampring 9 D 22885 Barsbttel, Germany EU KONFORMITTSERKLRUNG:
Horizon LLC erklrt hiermit, dass dieses Produkt konform zu den essentiellen Anforderungen der RED Direktive ist. Eine Kopie der Konformittserklrung ist online unter folgender Adresse verfgbar : http://www.horizonhobby.com/content/support-render-compliance. Entsorgung in der Europischen Union Dieses Produkt darf nicht ber den Hausmll entsorgt werden. Es ist die Verantwortung des Benutzers, dass Produkt an einer registrierten Sammelstelle fr Elektroschrott abzugeben diese Verfahren stellt sicher, dass die Umwelt geschont wird und natrliche Ressourcen nicht ber die Gebhr beansprucht werden. Dadurch wird das Wohlergehen der menschlichen Gemeinschaft geschtzt. Fr weitere Informationen, wo der Elektromll entsorgt werden kann, kn-
nen Sie Ihr Stadtbro oder Ihren lokalen Entsorger kontaktieren. 55223.1 SPM2335 Created: 6/2017 2017 Horizon Hobby, LLC. DSM, DSM2, DSMR, AVC, Active Vehicle Control and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. All other trademarks, service marks and logos are property of their respective owners. US 9,320,977. Other patents pending. 14 SPEKTRUM DX2E ACTIVE USER GUIDE DE SPEKTRUM DX2E ACTIVE USER GUIDE 15 FR La totalit des instructions, garanties et autres documents est sujette modi cation la seule discrtion dHorizon Hobby, LLC. Pour obtenir la documentation jour, rendez-vous sur le site www.horizonhobby.com et cliquez sur longlet de support de ce produit. REMARQUE SIGNIFICATION DE CERTAINS TERMES SPCIFIQUES Les termes suivants sont utiliss dans lensemble du manuel pour indiquer diffrents niveaux de danger lors de lutilisation de ce produit:
REMARQUE: procdures qui, si elles ne sont pas suivies correctement, peuvent entraner des dgts matriels ET poten-
tiellement un risque faible de blessures. ATTENTION: procdures qui, si elles ne sont pas suivies correctement, peuvent entraner des dgts matriels ET des blessures graves. AVERTISSEMENT: procdures qui, si elles ne sont pas suivies correctement, peuvent entraner des dgts matriels et des blessures graves OU engendrer une probabilit leve de blessure super cielle. 14 ans et plus. Ceci nest pas un jouet. AVERTISSEMENT: Lisez la TOTALIT du manuel dutilisation a n de vous familiariser avec les caractristiques du produit avant de le faire fonctionner. Une utilisation incorrecte du produit peut entraner lendommagement du produit lui-mme, ainsi que des risques de dgts matriels, voire de blessures graves. Ceci est un produit de loisirs sophistiqu. Il doit tre manipul avec prudence et bon sens et requiert des aptitudes de base en mcanique. Toute utilisation de ce produit ne respectant pas les principes de scurit et de responsabilit peut entraner des dgts matriels, endommager le produit et provoquer des blessures. Ce produit nest pas destin tre utilis par des enfants sans la surveillance directe dun adulte. Nessayez pas de modi er ou dutiliser ce produit avec des composants incompatibles hors des instructions fournies par Horizon Hobby, LLC. Ce manuel comporte des instructions relatives la scurit, au fonctionnement et lentretien. Il est capital de lire et de respecter toutes les instructions et tous les avertissements du manuel avant lassemblage, le rglage ou lutilisation a n de manipuler correctement lappareil et dviter tout dgt matriel ainsi que toute blessure grave. ATTENTION AUX CONTREFAONS: Toujours acheter chez un revendeur of ciel Horizon hobby pour tre sur davoir des produits authentiques. Horizon Hobby dcline toute garantie et responsabilit concernant les produits de contrefaon ou les produits se disant compatibles DSM ou Spektrum. REMARQUE: Ce produit est uniquement rserv une utilisation avec des modles rduits radiocommands de loisir. Horizon Hobby se dgage de toute responsabilit et garantie si le produit est utilis dautre manire que celle cite prcdemment. REMARQUE: Veuillez visiter www.spektrumrc.com/registration pour enregistrer en ligne votre produit. PRCAUTIONS RELATIVES A LA SCURIT Contrlez toujours que toutes les batteries sont INSTALLATION DES PILES ATTENTION: Risque dexplosion si une pile est remplace par un type de pile incorrect. liminer les piles uses conformment aux rglementations nationales. ATTENTION: Si vous utilisez des piles rechargeables, ne chargez que les piles rechargeables. Le chargement de piles non rechargeables peut provoquer une explosion des piles, ce qui entrane des blessures aux personnes et / ou des dommages matriels. correctement charges avant dutiliser le vhicule. Toujours contrler les servos et leurs connexions avant chaque Utilisation. Ne pilotez jamais votre modle proximit de spectateurs, sur un parking ou nimporte quel autre lieu o vous pouvez causer des blessures corporelles ou des dgts matriels. Ne pilotez jamais votre modle sous une averse. Une mauvaise visibilit peut entraner une perte de lorientation et une perte de contrle de votre vhicule. Ne pointez jamais lextrmit de lantenne directement vers le modle. Les ondes mises par lextrmit de lantenne sont trs faibles. Si, en cours dutilisation de votre modle, vous constatez, quelque moment que ce soit, un comportement erratique ou anormal, cessez immdiatement de lutiliser jusqu trouver la cause du problme et y remdier. 16 SPEKTRUM DX2E ACTIVE USER GUIDE DEL DINDICATION DE TENSION Vert fixe Tension correcte (suprieure 4V) Vert clignotant Tension faible, remplacez les piles (en dessous de 4V) COMPATIBILIT DES RCEPTEURS Le DX2E est compatible avec tous les rcepteurs surface Spektrum DSMR et DSM2. BRANCHEMENTS ET INSTALLATION DU RCEPTEUR Antenne Port des gaz Port de la direction Prise daffectation FR AFFECTATION DU RCEPTEUR Laffectation est le processus qui programme le rcepteur pour quil reconnaisse le code (appel GUIDGlobally Unique Identifier) dun metteur spcifique. Quand un rcepteur est affect un metteur, le rcepteur ne rpondra quaux ordres donns par cet metteur ou mmoire modle. La DX2E et le SR310 sont affects ensemble lusine, cependant si vous devez effectuez une affectation, suivez les tapes suivantes:
1. Rcepteur hors tension, insrez la prise de bind dans le port bind du rcepteur. 2. Alimentez le rcepteur par nimporte quel autre port. La DEL verte va se mettre clignoter, indiquant que le rcepteur est en mode affectation. 3. Avec le volant et la gchette en position dsire pour le failsafe (consultez la section failsafe pour plus dinformations), pressez et maintenez le bouton Bind tout en mettant lmetteur sous tension. La DEL verte sur la faade de lmetteur va clignoter durant 3 secondes indiquant que lmetteur est en mode affectation. Relchez le bouton ds que la DEL se met clignoter. Continuez maintenir les commandes en position de failsafe jusqua la fin du processus. INSTALLATION TYPIQUE POUR MODLE LECTRIQUE Batterie Vers le moteur Bouton daffectation Rcepteur Contrleur Servo de direction INSTALLATION TYPIQUE POUR MODLE THERMIQUE Rcepteur Servo des gaz Servo de direction Batterie Le rcepteur doit tre fix votre vhicule en utilisant de la mousse double-face. Cette mousse double-face maintient le rcepteur en place tout en lisolant des vibrations. Lantenne doit tre guide verticalement laide dun tube dantenne. Plus lantenne sera leve, meilleure sera la rception. ATTENTION: Ne coupez jamais lantenne. SPEKTRUM DX2E ACTIVE USER GUIDE 4. La DEL du rcepteur sclaire de faon fixe quand laffectation est effectue. 5. Retirez la prise de bind et rangez-la soigneusement. Vous devez refaire laffectation quand:
Diffrentes positions de failsafe sont dsires ou que les sens de rotation des servos ont t changs. Vous changez de rcepteur. Vous affectez le rcepteur un autre rcepteur. FAILSAFE Les positions du failsafe sont enregistres durant laffectation. Si une perte de signal intervient durant lutilisation du modle, les servos seront automatiquement placs en position failsafe (gnralement gaz au ralenti et direction au neutre). Quand le signal est rtabli, le failsafe se dsactive, le contrle se ractive. Pour plus dinformations concernant le paramtrage du failsafe, consultez la section daffectation du rcepteur. 17 FR INVERSION DU SENS DES SERVOS Si quand vous tournez le volant vers la droite, les roues braquent vers la gauche (et vice et versa), la voie doit tre inverse. Pour inverser une voie, dplacez linterrupteur de la voie correspondante de la position N la position R. Interrupteur dinversion de la direction Interrupteur dinversion des gaz TRIM DES GAZ Le bouton rotatif du trim des gaz sert ajuster le trim des gaz lorsque la manette des gaz est relche (position neutre). On sen sert typiquement pour rgler les freins. Une rotation du bouton entrane un changement du trim des gaz
(la position de la manette des gaz au repos). Potentiomtre du trim des gaz RGULATEUR DE GAZ Linterrupteur de rgulateur de gaz permet de limiter les gaz 50/70/100%. Il est trs utile pour limiter la sortie moteur sur les pistes faible traction ou pour limiter la vitesse du vhicule pour les pilotes dbutants. Interrupteur rgulateur de gaz INTERRUPTEUR 3 POSITIONS Linterrupteur 3 positions sert contrler une troisime voie et est prrgl en usine -100%/Neutre/100%. Interrupteur 3 positions DBATTEMENT DE LA DIRECTION ET CONTRLE DE LA SENSIBILIT Le dbattement de direction peut tre ajust tout moment durant le pilotage. Cette fonction vous permet de rduire le dbattement de la direction, le dbattement ne peut tre suprieur 100%. Quand la DX2E est affecte un rcepteur DSMR AVC, le potentiomtre ST RATE contrle la sensibilit du rcepteur. Faites tourner le potentiomtre ST RATE dans le sens anti-horaire pour rduire la sensibilit. Faites tourner le potentiomtre ST RATE dans le sens horaire pour augmenter la sensibilit. Potentiomtre de dbattement de la direction TRIM DE DIRECTION Le trim de direction vous permet de corriger la trajectoire du vhicule. Par exemple, si votre vhicule a tendance aller vers la droite, ajustez le trim vers la gauche jusqu obtenir une trajectoire parfaitement rectiligne. Potentiomtre du trim de direction MODIFICATION DES COURSES La fonction de rglage des courses permet un rglage prcis des fins de courses dans chaque direction de la voie des gaz et de direction. 1. Maintenez la gchette sur frein maxi et le volant braqu droite lors de la mise sous tension de lmetteur. La DEL clignote rapidement, indiquant lactivation du mode programmation. 2. Fin de course de lacclrateur: Maintenez la gchette en position plein gaz. Agissez sur le potentiomtre TH TRIM pour rgler la fin de course de lacclrateur. 3. Fin de course du frein: Maintenez la gchette en position frein. Agissez sur le potentiomtre TH TRIM pour rgler la fin de course du frein. Relchez la gchette pour la remettre au neutre. 4. Fin de course de la direction vers la gauche: Maintenez le volant totalement vers la gauche. Agissez sur le potentiomtre ST TRIM pour rgler la fin de course de la direction vers la gauche. 5. Fin de course de la direction vers la droite: Maintenez le volant totalement vers la droite. Agissez sur le potentiomtre ST TRIM pour rgler la fin de course de la direction vers la droite. Relchez la gchette pour la remettre au neutre. 6. Mettez lmetteur hors tension pour enregistrer le rglage des fins de courses. La course minimale est de 75% et la course maximale est de 150%. le rglage par dfaut est une course de 125% la direction et une course de 100% aux gaz. 18 IMPORTANT: Si vous modifiez les courses de la DX2E, vous devrez raffecter et recalibrer les rcepteurs AVC. SPEKTRUM DX2E ACTIVE USER GUIDE FR MODULE BLUETOOTH:
Le module Bluetooth optionnel (vendu sparment) permet un accs sans fil aux applications radio sur les tablettes et smartphones compatibles. Lapplication affiche un tableau de bord pour le vhicule slectionn et permet de faire des changements de rglage rapides et daccder la mmoire du modle. 1. Assurez-vous que lmetteur est hors tension. 2. Retirez le couvercle arrire de lmetteur en retirant une vis. Conseil: Vous pouvez utiliser un petit tournevis plat pour retirer le couvercle arrire une fois que vous avez retir la vis. 3. Mettez bien le module Bluetooth en place larrire de la DX2E et fixez-le laide de la vis retire ltape 2. Pour plus dinformations sur le module Bluetooth, veuillez-vous rendre sur www.spektrumrc.com MODULE COMPTEUR:
Le module compteur optionnel (vendu sparment) fournit un affichage simple et large de votre vitesse. Le module compteur est galement utiliser pour entrer le compteur de ples moteur et la distance parcourue par rotation moteur. IMPORTANT: Le module compteur ncessite un module tlmtrique ou un rcepteur tlmtrique et un capteur moteur Brushless. 1. Assurez-vous que lmetteur est hors tension. 2. Retirez la vis du boitier de lmetteur DX2E comme indiqu sur lillustration. 3. Retirez le couvercle sur la partie suprieure de lmetteur laide dun petit tournevis plat. 4. Mettez bien le module compteur en place et fixez-le laide de la vis retire ltape 2. Pour plus dinformations sur le module Bluetooth, veuillez-vous rendre sur www.spektrumrc.com 2. 3. 4. GUIDE DE DPANNAGE 2.4GHZ Problme Cause possible Solution Le systme ne se connecte pas Le rcepteur passe en mode failsafe une faible distance de lmetteur Le rcepteur ne rpond pas durant lutilisation Lmetteur et le rcepteur sont trop proches lun de lautre Vous tes trop proche dobjets mtalliques Le modle slectionn nest pas affect avec lmetteur Emetteur mis accidentellement en mode affectation R-effectuez le procesus daffectation Eloignez-vous de cette zone Vri ez que vous avez slectionn le bon modle et quil est affect Eloignez lmetteur une distance de 2m environ Contrlez ltat de lantenne du rcepteur Tension de la batterie trop faible Cbles abms ou dbranchs entre la batterie et le rcepteur Remplacez le rcepteur ou contactez le service technique Horizon Hobby Assurez-vous que lantenne du rcepteur se trouve dans un tube dantenne et au-dessus du vhicule Rechargez totalement les batteries. Les rcepteurs Spektrum ncessitent un minimum de 3.5V pour fonctionner. Une alimentation insuf sante, peut momentanment chuter en dessous de 3.5V, cau-
sant une coupure dalimentation Contrlez ltat des cbles et remplacez-les sils sont endommags SPEKTRUM DX2E ACTIVE USER GUIDE 19 FR GARANTIE ET RPARATIONS URE DE LA GARANTIE Garantie exclusive - Horizon Hobby, LLC (Horizon) garantit que le Produit achet (le Produit ) sera exempt de dfauts matriels et de fabrication sa date dachat par lAcheteur. La dure de garantie correspond aux dispositions lgales du pays dans lequel le produit a t acquis. La dure de garantie est de 6 mois et la dure dobligation de garantie de 18 mois lexpiration de la priode de garantie. LIMITATIONS DE LA GARANTIE
(a) La garantie est donne lacheteur initial ( Acheteur et nest pas transfrable. Le recours de lacheteur consiste en la rparation ou en lchange dans le cadre de cette garantie. La garantie sapplique uniquement aux produits achets chez un revendeur Horizon agr. Les ventes faites des tiers ne sont pas couvertes par cette garantie. Les revendications en garantie seront acceptes sur fourniture dune preuve dachat valide uniquement. Horizon se rserve le droit de modifier les dispositions de la prsente garantie sans avis pralable et rvoque alors les dispositions de garantie existantes.
(b) Horizon nendosse aucune garantie quant la vendabilit du produit ou aux capacits et la forme physique de lutilisateur pour une utilisation donne du produit. Il est de la seule responsabilit de lacheteur de vrifier si le produit correspond ses capacits et lutilisation prvue.
(c) Recours de lacheteur Il est de la seule discrtion dHorizon de dterminer si un produit prsentant un cas de garantie sera rpar ou chang. Ce sont l les recours exclusifs de lacheteur lorsquun dfaut est constat. Horizon se rserve la possibilit de vrifier tous les lments utiliss et susceptibles dtre intgrs dans le cas de garantie. La dcision de rparer ou de remplacer le produit est du seul ressort dHorizon. La garantie exclut les dfauts esthtiques ou les dfauts provoqus par des cas de force majeure, une manipulation incorrecte du produit, une utilisation incorrecte ou commerciale de ce dernier ou encore des modifications de quelque nature quelles soient. La garantie ne couvre pas les dgts rsultant dun montage ou dune manipulation errons, daccidents ou encore du fonctionnement ainsi que des tentatives dentretien ou de rparation non effectues par Horizon. Les retours effectus par le fait de lacheteur directement Horizon ou lune de ses reprsentations nationales requirent une confirmation crite. LIMITATION DES DGTS Horizon ne saurait tre tenu pour responsable de dommages consquents directs ou indirects, de pertes de revenus ou de pertes commerciales, lis de quelque manire que ce soit au produit et ce, indpendamment du fait quun recours puisse tre formul en relation avec un contrat, la garantie ou lobligation de garantie. Par ailleurs, Horizon nacceptera pas de recours issus dun cas de garantie lorsque ces recours dpassent la valeur unitaire du produit. Horizon nexerce aucune influence sur le montage, lutilisation ou la maintenance du produit ou sur dventuelles combinaisons de produits choisies par lacheteur. Horizon ne prend en compte aucune garantie et naccepte aucun recours pour les blessures ou les dommages pouvant en rsulter. En utilisant et en montant le produit, lacheteur accepte sans restriction ni rserve toutes les dispositions relatives la garantie figurant dans le prsent document. Si vous ntes pas prt, en tant quacheteur, accepter ces dispositions en relation avec lutilisation du produit, nous vous demandons de restituer au vendeur le produit complet, non utilis et dans son emballage dorigine. QUESTIONS, ASSISTANCE ET RPARATIONS Votre revendeur spcialis local et le point de vente ne peuvent effectuer une estimation dligibilit lapplication de la garantie sans avoir consult Horizon. Cela vaut galement pour les rparations sous garantie. Vous voudrez bien, dans un tel cas, contacter le revendeur qui conviendra avec Horizon dune dcision approprie, destine vous aider le plus rapidement possible. MAINTENANCE ET RPARATION Si votre produit doit faire lobjet dune maintenance ou dune rparation, adressez-vous soit votre revendeur spcialis, soit directement Horizon. Emballez le produit soigneusement. Veuillez noter que le carton demballage dorigine ne suffit pas, en rgle gnrale, protger le produit des dgts pouvant survenir pendant le transport. Faites appel un service de messagerie proposant une fonction de suivi et une assurance, puisque Horizon ne prend aucune responsabilit pour lexpdition du produit jusqu sa rception accepte. Veuillez joindre une preuve dachat, une description dtaille des dfauts ainsi quune liste de tous les lments distincts envoys. Nous avons de plus besoin dune adresse complte, dun numro de tlphone (pour demander des renseignements) et dune adresse de courriel. GARANTIE ET RPARATIONS Les demandes en garantie seront uniquement traites en prsence dune preuve dachat originale manant dun revendeur spcialis agr, sur laquelle figurent le nom de lacheteur ainsi que la date dachat. Si le cas de garantie est confirm, le produit sera rpar Cette dcision relve uniquement de Horizon Hobby. RPARATIONS PAYANTES En cas de rparation payante, nous tablissons un devis que nous transmettons votre revendeur. La rparation sera seulement effectue aprs que nous ayons reu la confirmation du revendeur. Le prix de la rparation devra tre acquitt au revendeur. Pour les rparations payantes, nous facturons au minimum 30 minutes de travail en atelier ainsi que les frais de rexpdition. En labsence dun accord pour la rparation dans un dlai de 90 jours, nous nous rservons la possibilit de dtruire le produit ou de lutiliser autrement. ATTENTION: Nous neffectuons de rparations payantes que pour les composants lectroniques et les moteurs. Les rparations touchant la mcanique, en particulier celles des hlicoptres et des voitures radiocommandes, sont extrmement coteuses et doivent par consquent tre effectues par lacheteur lui-mme. 10-15 20 SPEKTRUM DX2E ACTIVE USER GUIDE FR COORDONNES DE GARANTIE ET RPARATIONS Pays dachat Horizon Hobby Numro de tlphone/E-mail Adresse Union europenne Horizon Technischer Service Sales: Horizon Hobby GmbH service@horizonhobby.de
+49 (0) 4121 2655 100 Hanskampring 9 D 22885 Barsbttel, Germany INFORMATION IC IC: 6157A-DX2EQ2UC IC: 6157 A-ASRX18 Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. DCLARATION DE CONFORMIT DE LUNION EUROPENNE :
Dclaration de conformit de lunion europenne : Horizon Hobby, LLC dclare par la prsente que ce produit est en conformit avec les exigences essentielles et les autres dispositions de la directive RED. Une copie de la dclaration de conformit Europenne est disponible :
http://www.horizonhobby.com/content/support-render-compliance. Elimination dans lUnion europenne :
Ce produit ne doit pas tre limin avec les ordures mnagres. Il est de la responsabilit de lutilisateur de remettre le produit un point de collecte of ciel des dchets dquipements lectriques. Cette procdure permet de garantir le respect de lenvironnement et labsence de sollicitation excessive des ressources naturelles. Elle protge de plus le bien-tre de la communaut humaine. Pour plus dinformations quant aux lieux dliminations des dchets dquipements lectriques, vous pouvez contacter votre mairie ou le service local de traitement des ordures mnagres. 55223.1 SPM2335 Created: 6/2017 2017 Horizon Hobby, LLC. DSM, DSM2, DSMR, AVC, Active Vehicle Control and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. All other trademarks, service marks and logos are property of their respective owners. US 9,320,977. Other patents pending. SPEKTRUM DX2E ACTIVE USER GUIDE 21 FR 22 SPEKTRUM DX2E ACTIVE USER GUIDE IT AVVISO Tutte le istruzioni, le garanzie e gli altri documenti pertinenti sono soggetti a cambiamenti a totale discrezione di Horizon Hobby, LLC. Per una documentazione aggiornata sul prodotto, visitare il sito horizonhobby.com e fare clic sulla scheda di supporto per questo prodotto. SIGNIFICATO DEI TERMINI USATI Nella documentazione relativa al prodotto vengono utilizzati i seguenti termini per indicare i vari livelli di pericolo potenziale durante luso del prodotto:
AVVISO: indica procedure che, se non debitamente seguite, possono determinare il rischio di danni alle cose E il rischio minimo o nullo di lesioni alle persone. ATTENZIONE: indica procedure che, se non debitamente seguite, determinano il rischio di danni alle cose E di gravi lesioni alle persone. AVVERTENZA: indica procedure che, se non debitamente seguite, determinano il rischio di danni alle cose, danni collaterali e gravi lesioni alle persone o il rischio elevato di lesioni super ciali alle persone. Almeno 14 anni. Non un giocattolo. AVVERTENZA: Leggere TUTTO il manuale di istruzioni e familiarizzare con le caratteristiche del prodotto prima di farlo funzionare. Un uso improprio del prodotto puo` causare danni al prodotto stesso e alle altre cose e gravi lesioni alle persone. Questo un prodotto so sticato per appassionati di modellismo. Deve essere azionato in maniera attenta e responsabile e richiede alcune conoscenze basilari di meccanica. Luso improprio o irresponsabile di questo prodotto pu causare lesioni alle persone e danni al prodotto stesso o alle altre cose. Questo prodotto non deve essere utilizzato dai bambini senza la diretta supervisione di un adulto. Non usare questo prodotto con componenti incompatibili o alterarlo al di fuori delle indicazioni fornite da Horizon Hobby, LLC. Questo manuale contiene le istruzioni per la sicurezza, luso e la manutenzione del prodotto. fondamentale leggere e seguire tutte le istruzioni e le avvertenze del manuale prima di montare, impostare o utilizzare il prodotto, al ne di utilizzarlo correttamente e di evitare di causare danni alle cose o gravi lesioni alle persone. AVVERTENZA CONTRO PRODOTTI CONTRAFFATTI: Raccomandiamo di acquistare sempre da rivenditori autorizzati Horizon per essere sicuri di avere un prodotto originale di alta qualit. Horizon ri uta qualsiasi tipo di assistenza in garanzia di prodotti contraffatti o che dichiarano compatibilit con DSM o Spektrum. AVVISO: Questo prodotto rivolto esclusivamente a veicoli di tipo hobbistico senza pilota a bordo e controllati a distanza. Al di fuori di questo utilizzo, Horizon Hobby declina ogni responsabilit e non riconosce interventi in garanzia. Registrazione della garanzia: Visitare oggi stesso il sito www.spektrumrc.com/registration per registrare il prodotto. INSTALLAZIONE DELLE BATTERIE PRECAUZIONI PER LA SICUREZZA NEL TRASMETTITORE Prima di usare il modello accertarsi che le batterie del trasmettitore e del ricevitore siano ben cariche. Controllare sempre tutti i servi e i loro collegamenti prima di ogni corsa. Non usare il modello vicino a spettatori, aree di parcheggio o altre situazioni che possano recare danno a persone o cose. Non usare il modello in condizioni meteorologiche avverse. Una scarsa visibilit pu creare disorientamento e perdita di controllo del modello. Non puntare lantenna verso il modello, perch quello il punto di minore irraggiamento e quindi la portata molto ridotta e si potrebbe perdere il controllo del veicolo. Non prendere rischi. Se in qualsiasi momento si notano comportamenti del modello strani o pericolosi, bisogna fermarsi finch non si individua e si corregge la causa del problema. ATTENZIONE: se la batteria viene sostituita con una di tipo non corretto, potrebbe veri carsi il rischio di esplosioni. Smaltire le batterie usate secondo le normative nazionali vigenti. ATTENZIONE: in caso di utilizzo di batterie ricaricabili, ricaricare solo le batterie ricaricabili. Ricaricare batterie non ricaricabili pu causare lesplosione delle batterie con conseguenti lesioni alle persone e/o danni alle cose. SPEKTRUM DX2E ACTIVE USER GUIDE 23 CONNESSIONE
(BINDING) DEL RICEVITORE Questa procedura programma il ricevitore a riconoscere il numero unico GUID del suo trasmettitore. Una volta connesso, il ricevitore risponder solo a quel trasmettitore. Il DX2E e lSR310 sono gi connessi (bound) in fabbrica, per se fosse necessario, possibile rifare la connessione
(rebind) seguendo la procedura:
1. Con il ricevitore spento inserire il connettore per il bind nella presa dedicata sul ricevitore. 2. Alimentare il ricevitore attraverso una porta qualsiasi. Il LED verde lampeggia continuamente indicando che il ricevitore nel modo bind. 3. Con il volantino dello sterzo e il grilletto del motore posizionati per il fail-safe (vedi la sezione riguardante il Fail-Safe per maggiori informazioni), accendere il trasmettitore tenendo premuto il suo pulsante di bind. Il LED verde, posto nella parte anteriore del trasmettitore, lampegger entro 3 secondi indicando che il trasmettitore nel modo bind. Rilasciare il pulsante di bind mentre il LED verde sta lampeggiando. Mantenere i comandi in posizione di fail-safe finch la procedura non terminata. Tasto Bind 4. Il LED sul ricevitore resta acceso fisso quando trasmettitore e ricevitore sono connessi. 5. Togliere il connettore per il bind e conservarlo accuratamente. Bisogna rifare questa operazione quando:
Si desidera una posizione diversa del Failsafe, per esempio quando si inverte la corsa di motore e/o sterzo. Si cambia tipo di ricevitore. Si vuole connettere il ricevitore ad un altro trasmettitore. FAILSAFE Limpostazione del failsafe si fa durante la connessione
(binding). Nel malaugurato caso che si perda il collegamento radio durante il funzionamento, il ricevitore mander i servi nella posizione stabilita per il fail-safe (normalmente freno al massimo e sterzo diritto). Quando il segnale del trasmettitore viene di nuovo ricevuto, i servi tornano a funzionare normalmente. Per ulteriori informazioni si veda la sezione riguardante il binding. IT LED INDICATORE DELLA BATTERIA Verde fisso Verde lampeggiante La batteria buona (sopra 4V) La tensione della batteria troppo bassa. Sostituire le batterie (inferiore a 4V) COMPATIBILIT DEL RICEVITORE La DX2E compatibile con tutti i ricevitori di superficie Spektrum DSM e DSM2. COLLEGAMENTI AL RICEVITORE E INSTALLAZIONE Antenna Presa motore Presa sterzo Bind Plug INSTALLAZIONE CON MOTORE ELETTRICO Batteria Al motore Ricevitore Regolatore elettronico di velocit Servo sterzo INSTALLAZIONE CON MOTORE A SCOPPIO Ricevitore Servo motore Servo sterzo Batteria Montare il ricevitore sul veicolo usando spugna biadesiva per servi, in questo modo il ricevitore sta al suo posto e viene anche isolato dalle vibrazioni. Montare lantenna nella parte alta del veicolo usando un tubetto per tenerla lontano dal telaio, pi alta e meglio riceve il segnale. ATTENZIONE: Non tagliare lantenna. 24 SPEKTRUM DX2E ACTIVE USER GUIDE INVERSIONE DEI SERVI Se con un comando dello sterzo a destra le ruote vanno verso sinistra (o viceversa), allora bisogna invertire il canale dello sterzo. Per fare questo basta spostare linterruttore relativo da una posizione allaltra (N sta per normale, R sta per reverse), aiutandosi con un piccolo cacciavite. Interruttore Reverse sterzo Interruttore Reverse motore IT TRIM DEL THROTTLE La manopola del trim del throttle usata per regolarlo quando la barra del throttle rilasciata (posizione neutra). Normalmente si utilizza per regolare i freni. Ruotando la manopola si cambia il trim del throttle (throttle in posizione ferma). Manopola trim motore LIMITATORE DEL GAS Linterruttore che limita la potenza del motore del 50, 70 e 100% utile su tracciati scivolosi o per limitare la velocit se il pilota alle prime armi. Interruttore limitazione del gas INTERRUTTORE A TRE POSIZIONI Linterruttore a tre posizioni serve a controllare un terzo canale ed impostato di fabbrica a -100%, neutro e 100%. Interruttore a tre posizioni TRIM DELLO STERZO Serve per una regolazione fine dello sterzo quando il volantino sta al centro in posizione di riposo. Normalmente il trim dello sterzo si regola per far procedere diritto il veicolo. Manopola trim sterzo CORSA DELLO STERZO E CONTROLLO DELLA SENSIBILIT Il rateo di sterzata (detto anche dual rate) consente di effettuare regolazioni on-the-fly della corsa dello sterzo usando la manopola ST Rate. Il rateo di sterzata limita il valore della corsa del servo dello sterzo. Il rateo di sterzata non pu essere superiore al 100%. Quando la radio DX2E connessa a una ricevente DSMR con AVC, la manopola ST RATE controlla il valore di sensibilit del sensore. Ruotare la manopola in senso antiorario per ridurre la sensibilit o in senso orario per aumentarla. Manopola rateo di sterzata CAMBIARE LE REGOLAZIONI DELLE CORSE Questa funzione permette di regolare i fine corsa con precisione in ogni direzione sia per il canale dello sterzo che per quello del motore. 1. Tenere il grilletto nella posizione di freno massimo mentre si accende il trasmettitore. Il LED lampeggia velocemente, indicando che la modalit di programmazione attiva. 2. Fine corsa motore: tenere il grilletto nella posizione di motore al massimo. Girare il TH TRIM per regolare il fine corsa al massimo. 3. Fine corsa freno: tenere il grilletto nella posizione di freno al massimo. Girare il TH TRIM per regolare il fine corsa del freno. Riportare il grilletto nella posizione centrale. 4. Fine corsa dello sterzo a sinistra: tenere il volantino tutto a sinistra. Girare il ST TRIM per regolare il fine corsa di sinistra. 5. Fine corsa dello sterzo a destra: tenere il volantino tutto a destra. Girare il ST TRIM per regolare il fine corsa di destra. 6. Spegnere il trasmettitore per salvare le regolazioni fatte. La corsa minima al 75% e quella massima al 150%. Le corse di default sono al 125% per lo sterzo e al 100% per il motore. IMPORTANTE: se si cambia la corsa sul DX2E, bisogna rifare la connessione (rebind) e calibrare i ricevitori AVC. SPEKTRUM DX2E ACTIVE USER GUIDE 25 IT MODULO BLUETOOTH Il modulo Bluetooth opzionale (venduto separatamente) consente laccesso wireless allapplicazione del radiocomando su smartphone o tablet supportati. Lapplicazione visualizza il dashboard di un veicolo selezionato e consente di apportare modifiche e di accedere alla memoria del modello con facilit. 1. Accertarsi che la trasmittente sia spenta. 2. Togliere una vite e rimuovere la copertura nera dalla parte posteriore della trasmittente. Consiglio: dopo aver rimosso la vite, usare un cacciavite piccolo a testa piatta per sollevare delicatamente la copertura posteriore. 3. Inserire saldamente il modulo Bluetooth nella parte posteriore della DX2E e fissare con la vite rimossa al punto 2. Per maggiori informazioni sul modulo Bluetooth, visitare il sito www.spektrumrc.com MODULO TACHIMETRO Il modulo Tachimetro opzionale (venduto separatamente) permette di leggere facilmente la velocit in formato grande. Il modulo Tachimetro viene usato anche per inserire il rollout e il numero di poli. IMPORTANTE: il modulo Tachimetro richiede un modulo per telemetria o una ricevente con telemetria e un sensore per motore brushless. 1. Accertarsi che la trasmittente sia spenta. 2. Rimuovere la vite installata nella scocca della trasmittente DX2E, come illustrato nella figura. 3. Rimuovere la copertura sul lato superiore dalla radio usando un cacciavite piccolo a testa piatta per sollevarla delicatamente. 4. Inserire saldamente il modulo Tachimetro e fissarlo con la vite rimossa al punto 2. Per maggiori informazioni sul modulo Tachimetro, visitare il sito www.spektrumrc.com 2. 3. 4. GUIDA ALLA RISOLUZIONE DEI PROBLEMI Problema Possible causa Soluzione La trasmittente e la ricevente sono troppo vicine Spostare la trasmittente da 2,4 a 3,6 metri dalla La trasmittente e la ricevente sono troppo vicine a dei grandi oggetti metallici (veicoli, ecc.) ricevente Allontanarsi dai grandi oggetti metallici
(veicoli, ecc.) Assicurarsi che sia stata selezionata la memoria di modello corretta e che la trasmittente sia collegata al modello Il sistema non si collega Il modello selezionato non collegato alla trasmittente La trasmittente stata messa in modalit collegamento e la ricevente non pi collegata Rifare il collegamento tra trasmittente e ricevente La ricevente va in modalit Failsafe a poca distanza dalla trasmittente Controllare lantenna della ricevente e assicurarsi che non sia tagliata o danneggiata La ricevente smette di rispondere durante lutilizzo Tensione della batteria bassa I cavi o i connettori tra batteria e ricevente sono danneggiati o lenti Sostituirla o contattare il servizio di assistenza Horizon Assicurarsi che lantenna della ricevente si trovi in un tubetto per antenne, al di sopra del veicolo Ricaricare completamente le batterie Controllare i cavi e le connessioni tra batteria e ricevente. Riparare o sostituire i cavi e/o i connettori 26 SPEKTRUM DX2E ACTIVE USER GUIDE PERIODO DI GARANZIA Periodo di garanzia La garanzia esclusiva - Horizon Hobby, LLC (Horizon) garantisce che i prodotti acquistati (il Prodotto) sono privi di difetti relativi ai materiali e di eventuali errori di montaggio. Il periodo di garanzia conforme alle disposizioni legali del paese nel quale il prodotto stato acquistato. Tale periodo di garanzia ammonta a 6 mesi e si estende ad altri 18 mesi dopo tale termine. Limiti della garanzia
(a) La garanzia limitata allacquirente originale (Acquirente) e non cedibile a terzi. Lacquirenteha il diritto a far riparare o a far sostituire la merce durante il periodo di questa garanzia.La garanzia copre solo quei prodotti acquistati presso un rivenditore autorizzato Horizon.Altre transazioni di terze parti non sono coperte da questa garanzia. La prova di acquisto necessaria per far valere il diritto di garanzia. Inoltre, Horizon si riserva il diritto di cambiare o modificare i termini di questa garanzia senza alcun preavviso e di escludere tutte le altregaranzie gi esistenti.
(b) Horizon non si assume alcuna garanzia per la disponibilit del prodotto, per ladeguatezza o lidoneit del prodotto a particolari previsti dallutente. sola responsabilit dellacquirente il fatto di verificare se il prodotto adatto agli scopi da lui previsti.
(c) Richiesta dellacquirente spetta soltanto a Horizon, a propria discrezione riparare o sostituire qualsiasi prodotto considerato difettoso e che rientra nei termini di garanzia. Queste sono le uniche rivalse a cui lacquirente si pu appellare, se un prodotto difettoso. Horizon si riserva il diritto di controllare qualsiasi componente utilizzato che viene coinvolto nella rivalsadi garanzia. Le decisioni relative alla sostituzione o alla riparazione avvengono solo in base alla discrezione di Horizon. Questa garanzia non copre dei danni superficiali o danni per cause di forza maggiore, uso errato del prodotto, negligenza, uso ai fini commerciali, o una qualsiasi modifica a qualsiasi parte del prodotto. Questa garanzia non copre danni dovuti ad una installazione errata, ad un funzionamento errato, ad una manutenzione o un tentativo di riparazione non idonei a cura di soggetti diversi da Horizon. La restituzione del prodotto a cura dellacquirente,, o da un suo rappresentante, deve essere approvata per iscritto dalla Horizon. Limiti di danno Horizon non si riterr responsabile per danni speciali, diretti, indiretti o consequenziali; perdita di profitto o di produzione; perdita commerciale connessa al prodotto, indipendentemente dal fatto che la richiesta si basa su un contratto o sulla garanzia. Inoltre la responsabilit di Horizon non supera mai in nessun caso il prezzo di acquisto del prodotto per il quale si chiede la responsabilit. Horizon non ha alcun controllo sul montaggio, sullutilizzo o sulla manutenzione del prodotto o di combinazioni di vari prodotti. Quindi Horizon non accetta nessuna responsabilit per danni o lesioni derivanti da tali circostanze. Con lutilizzo e il montaggio del prodotto lutente acconsente a tutte le condizioni, limitazioni e riserve di garanzia citate in questa sede. Qualora lutente non fosse pronto ad assumersi tale responsabilit associata alluso del prodotto, si suggerisce di restituire il prodotto intatto, mai usato e immediatamente presso il venditore. SPEKTRUM DX2E ACTIVE USER GUIDE IT Indicazioni di sicurezza Questo un prodotto sofisticato di hobbistica e non un giocattolo. Esso deve essere manipolato con cautela, con giudizio e richiede delle conoscenze basilari di meccanica e delle facolt mentali di base. Se il prodotto non verr manipolato in maniera sicura e responsabile potrebbero risultare delle lesioni, dei gravi danni a persone, al prodotto o allambiente circostante. Questo prodotto non concepito per essere usato dai bambini senza una diretta supervisione di un adulto. Il manuale del prodotto contiene le istruzioni di sicurezza, di funzionamento e di manutenzione del prodotto stesso. fondamentale leggere e seguire tutte le istruzioni e le avvertenze nel manuale prima di mettere in funzione il prodotto. Solo cos si eviter un utilizzo errato e di preverranno incidenti, lesioni o danni. Domande, assistenza e riparazioni Il vostro negozio locale e/o luogo di acquisto non possono fornire garanzie di assistenza o riparazione senza previo colloquio con Horizon. Questo vale anche per le riparazioni in garanzia. Quindi in tale casi bisogna interpellare un rivenditore, che si metter in contatto subito con Horizon per prendere una decisione che vi possa aiutare nel pi breve tempo possibile. Manutenzione e riparazione Se il prodotto deve essere ispezionato o riparato, si prega di rivolgersi ad un rivenditore specializzato o direttamente ad Horizon. Il prodotto deve essere Imballato con cura. Bisogna far notare che i box originali solitamente non sono adatti per effettuare una spedizione senza subire alcun danno. Bisogna effettuare una spedizione via corriere che fornisce una tracciabilit e unassicurazione, in quanto Horizon non si assume alcuna responsabilit in relazione alla spedizione del prodotto. Inserire il prodotto in una busta assieme ad una descrizione dettagliata dei problemi e ad una lista di tutti i singoli componenti spediti. Inoltre abbiamo bisogno di un indirizzo completo, di un numero di telefono per rivolgere ulteriori domande e di un indirizzo e-mail. Garanzia a riparazione Le richieste in garanzia verranno elaborate solo se presente una prova dacquisto in originale proveniente da un rivenditore specializzato autorizzato, nella quale ben visibile la data di acquisto. Se la garanzia viene confermata, allora il prodotto verr riparato o sostituito. Questa decisione spetta esclusivamente a Horizon Hobby. Riparazioni a pagamento Se bisogna effettuare una riparazione a pagamento, effettueremo un preventivo che verr inoltrato al vostro rivenditore. La riparazione verr effettuata dopo lautorizzazione da parte del vostro rivenditore. La somma per la riparazione dovr essere pagata al vostro rivenditore. Le riparazioni a pagamento avranno un costo minimo di 30 minuti di lavoro e in fattura includeranno le spese di restituzione. Qualsiasi riparazione non pagata e non richiesta entro 90 giorni verr considerata abbandonata e verr gestita di conseguenza. ATTENZIONE: Le riparazioni a pagamento sono disponibili solo sullelettronica e sui motori. Le riparazioni a livello meccanico, soprattutto per gli elicotteri e le vetture RC sono molto costose e devono essere effettuate autonomamente dallacquirente. 10-15 27 IT CONTATTI PER LA GARANZIA E L'ASSISTENZA Stato di acquisto Horizon Hobby Telefono/Indirizzo e-mail Unione Europea Horizon Technischer Service service@horizonhobby.eu Sales: Horizon Hobby GmbH
+49 (0) 4121 2655 100 DICHIARAZIONE DI CONFORMIT UE:
Indirizzo Hanskampring 9 D 22885 Barsbttel, Germany Horizon Hobby, LLC con la presente dichiara che il prodotto conforme ai requisiti essenziali e ad altre disposizioni rilevanti della direttiva RED. Una copia della dichiarazione di conformit per lUnione Europea disponibile a: http://www.horizonhobby.com/content/
support-render-compliance. Smaltimento allinterno dellUnione Europea:
Questo prodotto non deve essere smaltito assieme ai ri uti domestici. Invece responsabilit dellutente lo smaltimento di tali ri uti, che devono essere portati in un centro di raccolta designato per il riciclaggio di ri uti elettronici. Con tale procedimento si aiuter preservare lambiente e le risorse non verranno sprecate. In questo modo si protegger il benessere dellumanit. Per maggiori informazioni sui punti di riciclaggio si prega di contattare il proprio uf cio locale o il servizio di smaltimento ri uti. 55223.1 SPM2335 Created: 6/2017 2017 Horizon Hobby, LLC. DSM, DSM2, DSMR, AVC, Active Vehicle Control and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. All other trademarks, service marks and logos are property of their respective owners. US 9,320,977. Other patents pending. 28 SPEKTRUM DX2E ACTIVE USER GUIDE
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-09-01 | 2405 ~ 2475 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2017-09-01
|
||||
1 | Applicant's complete, legal business name |
Horizon Hobby, LLC
|
||||
1 | FCC Registration Number (FRN) |
0006301931
|
||||
1 | Physical Address |
2904 Research Rd.
|
||||
1 |
Champaign, IL
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
d******@elitetest.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BRW
|
||||
1 | Equipment Product Code |
DX2EQ2UC
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
C******** D****
|
||||
1 | Title |
President and EVP Product Management and Marketing
|
||||
1 | Telephone Number |
217-4********
|
||||
1 | Fax Number |
217-4********
|
||||
1 |
c******@horizonhobby.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | DX2e | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Elite Electronic Engineering Inc.
|
||||
1 | Name |
K******** H******
|
||||
1 | Telephone Number |
630-4******** Extension:
|
||||
1 | Fax Number |
630-4********
|
||||
1 |
k******@elitetest.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2405.00000000 | 2475.00000000 | 0.0850000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC