all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 3.80 MiB | July 03 2018 | |||
1 2 | Cover Letter(s) | July 03 2018 | ||||||
1 2 | Test Report | July 03 2018 | ||||||
1 2 | Test Setup Photos | July 03 2018 | ||||||
1 2 | External Photos | July 03 2018 | ||||||
1 2 | Internal Photos | July 03 2018 | ||||||
1 2 | Cover Letter(s) | July 03 2018 | ||||||
1 2 | ID Label/Location Info | July 03 2018 | ||||||
1 2 | ID Label/Location Info | July 03 2018 | ||||||
1 2 | Test Report | July 03 2018 | ||||||
1 2 | Test Setup Photos | July 03 2018 |
1 2 | User Manual | Users Manual | 3.80 MiB | July 03 2018 |
EN RTF/BNF Instruction Manual Install the Flight Battery 1 Throttle down 2 Power ON 3 Let parts cool after use before touching, motors initialization, then ashes blue when it is ready to bind. NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com and click on the support tab for this product. MEANING OF SAFETY SIGNAL WORDS The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:
NOTICE: Instructions, which if not followed, create a possibility of property damage AND minor injury. CAUTION: Instructions, which if not followed, create a probability of property damage AND a possibility of injury. CAUTION: Read and follow all instructions and warnings in the manual prior to setup or use. Failure to operate the product correctly can result in damage to the product, personal property and/or injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Do not attempt disassembly, use with incompatible components or augment product in any way without the approval of Horizon Hobby, LLC. Age Recommendation: Not for children under 14 years. This is not a toy. Operating Safety Precautions As the user of this product, you are responsible for operating it safely, not endangering yourself and others, or damaging the product or the property of others. powered on. Operate your product in open spaces away from will get hot in use. Keep the transmitter powered on while model is Remove batteries after use, as applicable. people and property. Never operate your product with damaged electrical components. General Product Safety Precautions Keep all batteries, chemicals, small parts and anything electrical out of the reach of children. Charging Warnings WARNING: Failure to comply with the following warnings could result in product malfunction, electrical issues, excessive heat, FIRE, and ultimately injury and property damage. NEVER LEAVE CHARGING BATTERIES UNATTENDED OR CHARGE OVERNIGHT. Never charge damaged batteries. If the battery begins to swell during charging or use, discontinue immediately. Avoid water exposure to this product. Keep parts dry. Keep moving parts clean. Always use the included battery and charger. Disconnect the battery after charging. Charge batteries away from ammable materials in a well-ventelated area. Never charge, transport, or store batteries in hot, cold, or very sunny places (recommended between 40120 F or 549 C). Components Airframe Blade Inductrix Motors 6mm Brushed On-board Electronics 3-in-1 mixer/ESCs/Gyro Battery 150mAh 1S 3.7V 25C Li-Po Charger 1S USB Li-Po Charger, 300 mAh Transmitter MLP4DSM RTF Included Installed Installed Included Included Included BNF Included Installed Installed Included Included Required Specifications 3.26 in (83mm) 1.10 in (28mm) Length Height To register your product online, visit www.bladehelis.com Charge the Flight Battery Propeller Diameter Flying Weight 2.56 in (65mm)
.56 oz (16 g) NOTICE: Inspect the battery to make sure it is not damaged e.g., swollen, bent, broken or punctured. Charge only batteries that are cool to the touch and are not damaged. Insert the charger into a USB port. Connect the battery to the charger. CHARGING (Solid Red LED) MAX CHARGE (LED OFF ) Disconnect the ight battery from the charger immediately upon completion of charging. USB Li-Po Charger DC Input:5.0V 350mA DC Output:4.2V 300mA SOLID RED LED Charging LED OFF Charge Complete EFLC1008 CAUTION: Only use chargers speci cally designed to charge the included Li-Po battery. Failure to do so could result in re, causing injury or property damage. CAUTION: Never exceed the recommended charge rate. CAUTION: Once charging is complete, immediately remove the battery. Never leave a battery connected to the charger. Install the Transmitter Batteries (RTF) Install 4 AA batteries into the transmitter, noting polarity. Replace the transmitter batteries when the power LED ashes and the transmitter beeps. We recommend using only alkaline AA batteries in the transmitter, however, it is possible to use rechargeable NiMH batteries. CAUTION: If using rechargeable batter-
ies, charge only rechargeable batteries. Charging non-rechargeable batteries may cause the batteries to burst, resulting in injury to persons and/or damage to property. 4 CAUTION: Always disconnect the Li-Po battery from the aircraft when not ying to avoid over-discharging the battery. Batteries discharged to a voltage lower than the lowest approved voltage may become damaged, resulting in loss of performance and potential re when the batteries are charged. Transmitter and Receiver Binding Your RTF transmitter comes prebound to the Inductrix. If you need to re-bind, follow the directions below. MLP4DSM Binding Procedure (RTF) 1. Disconnect the ight battery from the quadcopter. 2. Center all trims on your transmitter. 3. Power off the transmitter and fully lower the throttle. 4. Connect the ight battery in the quadcopter. The LED on the 3-in-1 control unit ashes red during 5. When the blue light is ashing, push in and hold down the left stick while powering on the trans-
mitter (you will hear a click and a long tone). 6. Release the left stick. The transmitter will beep and the power LED will blink. The quadcopter is bound when the blue LED on the 3-in-1 control unit turns solid. 7. Disconnect the ight battery and power the transmitter off. The Inductrix quadcopter requires no radio-speci c setup for basic ight. If you are using a computer trans-
mitter, simply bind the quadcopter to your transmitter to a new model and with the model type set to Acro or Airplane mode. To bind or re-bind your aircraft to your chosen transmitter, please follow the directions below. General Binding Procedure (BNF) 1. Disconnect the ight battery from the quadcopter. 2. Set the model type in your transmitter settings to Acro mode. 3. Center all trims on your transmitter. 4. Power off the transmitter and fully lower the throttle. 5. Connect the ight battery in the quadcopter. The LED on the 3-in-1 control unit ashes red during initialization, then ashes blue when it is ready to bind. 6. Put the transmitter into bind mode while powering on the transmitter. 7. Release the bind button/switch after 23 seconds. The quadcopter is bound when the blue LED on the 3-in-1 control unit turns solid. 8. Disconnect the ight battery and power the transmitter off. CAUTION: When using a Futaba transmitter with a Spektrum module, you must reverse the throttle channel and rebind. Refer to your Spektrum module manual for binding and failsafe instructions. Refer to your Futaba transmitter manual for instructions on reversing the throttle channel. If you encounter problems, obey the binding instructions and refer to the troubleshooting guide for other instructions. If needed, contact the appropriate Horizon Product Support of ce. For a list of compatible DSM transmitters, please visit www.bindn y.com. Revolutionary SAFE (Sensor Assisted Flight Envelope) technology uses an innovative combination of multi-axis sensors and software that allows model aircraft to know its position relative to the horizon. This spatial awareness is utilized to create a controlled ight envelope the aircraft uses to maintain a safe region of bank and pitch angles so you can y more safely. Transmitter Control (RTF) Technology Bind F E D Power LED indicator On/Off Switch D Dual rate se selection A B C When pressed down, trim buttons make a sound that increases or decreases in pitch at each pressing. The middle or neutral trim position is heard as a middle tone in the pitch range of the sounds. The end of the control range is sounded by a series of beeps. E A D B C F Mode 1 Mode 2 Aileron (Left/Right) Throttle (Up/Down) Aileron (Left/Right) Elevator (Up/Down) Throttle Trim Elevator Trim Aileron Trim Aileron Trim Rudder Trim Rudder Trim Elevator Trim Throttle Trim Rudder (Left/Right) Elevator (Up/Down) Rudder (Left/Right) Throttle (Up/Down) Dual rate selection Rate Selection RTF The Inductrix RTF quadcopter comes with the Blade MLP4DSM transmitter. When powered on, this transmitter is automatically high rate. Change rates by pressing and releasing the right control stick. In low-rate mode, the quadcopter is limited to a lower bank angle and will self-level when the control sticks are released. This mode is typically preferred by pilots looking for smoother/
easier control response during rst time use. In high-rate mode, the quadcopter has a higer possible bank angle and will self-level when the control sticks are released. Understand the Primary Flight Controls If you are not familiar with the controls of your Inductrix quadcopter, take a few minutes to familiarize yourself with them before attempting your rst ight. Throttle Left Side View Descend Left Side View Throttle up Climb Throttle down Rudder Rudder left Elevator Elevator down Aileron Nose Yaws Left Rudder right Nose Yaws Right Left Side View Left Side View Forward Elevator up Backward Rear View Rear View Aileron left Left Aileron right Right Fly the Quadcopter The LEDs on the Inductrix indicate the front and back of the quadcopter. The white LEDs indicate the front. The red LEDs indicate the back. Takeoff Increase the throttle until the model is approximately 2 ft. (600mm) off the ground in a low-level hover and concentrate on balancing the throttle sticks position so that the quadcopter holds a steady hover altitude. In some cases, you may need to make a few short hops to an altitude of just a few inches until you become familiar with the control inputs and trim settings required to maintain a steady hover and altitude. Hovering The Inductrix quadcopter requires minor throttle adjustments to maintain its altitude in hover. Remem-
ber to keep these throttle adjustments as minimal as possible. Large adjustments could result in a loss of control or a possible crash. NOTICE: Crash damage is not covered under warranty. To prevent excessive wear to the motors, always allow the motors to cool between ights. Low Voltage Cutoff (LVC) Once the battery reaches 3V under load, the ESC will continuously lower power supplied to the motor until complete shutdown occurs. This helps prevent over-discharge of the Li-Po battery. Land immedi-
ately once the ESC activates LVC. Continuing to y after LVC can damage the battery, cause a crash or both. Crash damage and batteries damaged due to over-discharge are not covered under warranty. Repeatedly ying the aircraft until LVC activates will damage the ight battery. Disconnect and remove the Li-Po battery from the aircraft after use to prevent trickle discharge. During storage, make sure the battery charge does not fall below 3V per cell. Parts list Part #
v BLH8780 BLH8701 BLH8702 BLH8703 BLH8704 BLH8705 BLH8706 Description Inductrix RTF Inductrix BNF 3-in-1 Control Unit: Inductrix Motor with Wire, Clockwise Rotation: Inductrix Motor w/Wire, Counter-Clockwise Rotation: Inductrix Canopy Set, Red & Blue: Inductrix Prop Set (4), White: Inductrix Main Frame: Inductrix Troubleshooting Guide Problem Possible Cause Solution Will not respond to throttle Does not function and smells burnt after connecting the ight battery Throttle too high and/or throttle trim is too high Reset controls with the throttle stick and throttle trim at the lowest setting Flight battery connected with the wrong polarity Replace the 3-in-1 board. Connect the ight battery noting proper polarity Transmitter too near aircraft during binding process Bind switch or button was not held while transmitter was powered on Aircraft or transmitter is too close to large metal object, wireless source or another transmitter Less than a 5-second wait between rst powering on the transmitter and connecting the ight battery to the quadcopter The quadcopter is bound to a differ-
ent model memory (ModelMatch transmitters only) Flight battery or transmitter battery charge is too low Aircraft or transmitter is too close to large metal object, wireless source or another transmitter Power off the transmitter. Move the transmitter a larger distance from the aircraft. Disconnect and reconnect the ight battery to the aircraft. Follow the binding instructions Power off transmitter and repeat bind process Move aircraft and transmitter to another location and attempt binding again Leave the transmitter powered on. Disconnect and reconnect the ight battery to the quadcopter Select the correct model memory on the transmitter. Disconnect and reconnect the ight battery to the quadcopter Replace or recharge batteries Move aircraft and transmitter to another location and attempt connecting again Propellers in wrong locations Make necessary adjustments LED on receiver ashes rapidly and quadcopter will not respond to transmitter
(during binding) LED on the receiver ashes rapidly and the quadcopter will not respond to the trans-
mitter (after binding) Crashes immediately upon lift-off or doesnt lift off FCC Information This device complies with part 15 of the FCC rules. Operation is subject to the following two condi-
tions: (1) This device may not cause harmful interference, and (2) this device must accept any interfer-
ence received, including interference that may cause undesired operation. CAUTION: Changes or modi cations not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This product contains a radio transmitter with wireless technology which has been tested and found to be compliant with the applicable regulations governing a radio transmitter in the 2.400GHz to 2.4835GHz frequency range. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Antenna Separation Distance When operating your product, please be sure to maintain a separation distance of at least 20 cm between your body (excluding ngers, hands, wrists, ankles and feet) and the antenna to meet RF exposure safety requirements as determined by FCC regulations. IC Information This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must ac-
cept any interference, including interference that may cause undesired operation of the device. Information IC Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Compliance Information for the European Union EU Compliance Statement:
Horizon Hobby, LLC hereby declares that this product is in compliance with the essen-
tial requirements and other relevant provisions of the RED Directive. A copy of the EU Declaration of Conformity is available online at: http://www.horizonhobby.com/
content/support-render-compliance. Instructions for disposal of WEEE by users in the European Union This product must not be disposed of with other waste. Instead, it is the users responsibility to dispose of their waste equipment by handing it over to a designated collections point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and make sure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city of ce, your household waste disposal service or where you purchased the product. 2015 Horizon Hobby, LLC. Blade,Inductrix, E- ite, SAFE, the SAFE logo and the Horizon Hobby Logo are trademarks or registered trademarks of Horizon Hobby, LLC. Patents pending. Created 06/2015 49816 DE RTF/BNF Bedienungsanleitung Einsetzen des Flugakkus 1 Gas nach unten 2 Einschalten 3 HINWEIS Alle Anweisungen, Garantien und anderen zugehrigen Dokumente knnen im eigenen Ermessen von Horizon Hobby, LLC jederzeit gendert werden. Die aktuelle Produktliteratur nden Sie auf horizonhobby.com unter der Registerkarte Support fr das betreffende Produkt. BEDEUTUNG DER SIGNALWRTER Die folgenden Begriffe werden in der gesamten Produktliteratur verwendet, um auf unterschiedlich hohe Gefahrenrisiken beim Betrieb dieses Produkts hinzuweisen:
HINWEIS: Wenn diese Anweisungen nicht korrekt befolgt werden, knnen sich mglicherweise Sachschden UND geringe Gefahr von Verletzungen ergeben. ACHTUNG: Wenn diese Anwesiungen nicht korrekt befolgt werden, ergeben sich wahrscheinlich Sachschden UND die Gefahr von schweren Verletzungen. ACHTUNG: Lesen Sie die GESAMTE Bedienungsanleitung, um sich vor dem Betrieb mit den Produktfunktionen vertraut zu machen. Wird das Produkt nicht korrekt betrieben, kann dies zu Schden am Produkt oder persnlichem Eigentum fhren oder schwere Verletzungen verursachen. Dies ist ein hochentwickeltes Hobby-Produkt. Es muss mit Vorsicht und gesundem Menschenverstand betrieben werden und bentigt gewisse mechanische Grundfhigkeiten. Versuchen Sie nicht ohne Genehmigung durch Horizon Hobby, LLC das Produkt zu zerlegen, es mit inkompatiblen Komponenten zu verwenden oder auf jegliche Weise zu erweitern. Nicht geeignet fr Kinder unter 14 Jahren. Dies ist kein Spielzeug. Sicherheitsvorkehrungen und Warnhinweise Als Nutzer dieses Produktes sind Sie allein fr den sicheren Betrieb ohne Gefhrdung des Produktes, ihrer selbst und dritter oder deren Eigentum verantwortlich. Modell eingeschaltet ist Betreiben Sie ihr Produkt auf weiten, offenen Flchen weg von Menschen und anderem Eigentum Betreiben Sie das Produkt niemals mit beschdigten elektrischen Komponenten Allgemeine Sicherheitshinweise zum Produkt Halten Sie alle Akkus, Batterien, Chemikalien und Kleinteile und andere elektrische Komponenten aus der Reichweite von Kindern. Warnungen zum Laden Lassen Sie den Sender eingeschaltet wenn das Lassen Sie die Teile abkhlen bevor Sie sie anfassen. Die Motoren werden whrend des Betriebes hei Allgemeine Sicherheitshinweise zum Produkt Halten Sie alle Batterien, Akkus, Chemikalien Kleinteile und Elektronikkomponenten aus der Reichweite von Kindern Vermeiden Sie mit diesem Produkt Wasserkontakt. Halten Sie die Teile trocken. Halten Sie die beweglichen Teile sauber. WARNUNG: Alle Anweisungen und Warnhinweise mssen genau befolgt werden. Falsche Handhabung von Li-Po-
Akkus kann zu Brand, Personen- und/oder Sachwertschden fhren. LASSEN SIE DAS NETZGERT, LADEGERT UND AKKU NIEMALS UNBEAUFSICHTIGT WHREND DES BETRIEBES. LADEN SIE NIEMALS AKKUS BER NACHT Laden Sie njemals beschdigte Akkus Sollte der Akku zu einem beliebigen Zeitpunkt beginnen, sich aufzublhen oder anzuschwellen, stoppen Sie die Verwendung unverzglich. Verwenden Sie immer das Ladegert und den Akku aus dem Lieferumfang. Trennen Sie nach dem Laden den Akku. Laden Sie die Akkus immer weit entfernt von brennbaren in gut belfteten Bereichen. Laden, transportieren oder lagern Sie niemals Akkus in heien, kalten oder Pltzen mit starker Sonneneinstrahlung.
(Empfohlener Temperaturbereich 40 - 120) Komponenten Rumpf Blade Inductrix Motoren 6mm Brstenmotoren On-Board Elektronik 3-in-1 Mischer/ESCs/Gyro Akku 150mAh 1S 3.7V 25C Li-Po Ladegert 1S USB Li-Po Ladegert, 300 mAh Sender MLP4DSM RTF Inklusive Eingebaut Eingebaut Inklusive Inklusive Inklusive BNF Inklusive Eingebaut Eingebaut Inklusive Inklusive Erforderlich Spezifikationen 65mm 16 g 83mm 28mm Propeller Durchmesser Fluggewicht Lnge Hhe Sie knnen Ihr Produkt online unter www.bladehelis.com registrieren. Laden des Flugakkus HINWEIS: Laden Sie Akkus nur, wenn sie auf Umgebungstemperatur abgekhlt sind. Schauen Sie sich den Akku an und stellen Sie sicher, dass dieser nicht beschdigt oder aufgequollen ist. Stecken Sie den Lader in den USB Port. Schlieen Sie den Akku an das Ladegert. Laden (LED rot ) Fertig geladen (LED aus) Entnehmen Sie den Akku immer aus dem Lader, sobald der Ladevorgang beendet ist. ACHTUNG: Verwenden Sie nur Ladegerte, die fr LIPO Akkus vorgesehen sind. Nichtbeachtung kann zu Feuer, Beschdigungen oder Verletzungen fhren. ACHTUNG: berschreiten Sie niemals die vorgesehene Ladezeit. ACHTUNG: Entnehmen Sie den Akku aus dem Lader, sobald dieser fertig geladen ist. Belassen Sie den Akku niemals im Lader. USB Li-Po Charger DC Input:5.0V 350mA DC Output:4.2V 300mA SOLID RED LED Charging LED OFF Charge Complete EFLC1008 Einsetzen der Senderbatterien (RTF) Setzen Sie unter Beobachtung der Polaritt die Senderbatterien ein. Ersetzen Sie die Batterien wenn die LED blinkt und der Sender piept. Wir empfehlen AA Alkaline Batterien in dem Sender zu verwenden. Sie knnen auch wiederau adbare NiMH Akkus verwenden. ACHTUNG: Wenn Sie wiederau adbare Akkus verwenden, laden Sie nur diese. Das Laden von nicht wiederau adbaren Batterien kann die Batterien zur Explosion bringen, was Krperverletzung und Sachbeschdigung zur Folge haben kann. 4 ACHTUNG: Trennen Sie den Li-Po-Akku immer vom Empfnger des Flugzeugs wenn Sie nicht iegen um eine Tiefentladung zu vermeiden. Akkus die unter die zulssige Mindestspannung entladen wer-
den, knnen dadurch beschdigt werden, was sich in Leistungsverlust und potentieller Brandgefahr bei dem Laden bemerkbar machen kann. Binden von Sender und Empfnger Ihr RTF Sender ist bereits an das Modell gebunden. Sollten Sie neu binden wollen folgen Sie bitte den untenstehenden Anweisungen. MLP4DSM Bindeprozess 1. Trennen Sie den Flugakku vom Quadcopter. 2. Zentrieren Sie alle Trimmungen auf dem Sender. 3. Schalten Sie den Sender aus und reduzieren das Gas vollstndig. 4. Installieren Sie den Akku im Quadcopter. Die LED auf der 3in1 Platine blinkt rot bei der Initialisierung und dann blau, um Bindebereitschaft anzuzeigen. 5. Drcken Sie wenn die blaue LED blinkt den linken Steuerhebel ein whrend Sie den Sender ein-
schalten (Sie hren dabei ein Klick und einen langen Ton). 6. Lassen Sie den Stick los. Der Sender piept und die Power LED blinkt. Der Quad-Copter ist gebunden wenn die LED auf der 3-in-1 Einheit blau leuchtet (nicht blinkt). 7. Trennen Sie den Flugakku und schalten den Sender aus. Der Inductrix Quadcopter erfordert zum Fliegen keine besondere Programmierung. Bei Verwendung eines Computersenders binden Sie den Copter auf dem Modelltyp Acro oder Flugzeug an den Sender. Um den Quadcopter zu binden folgen Sie bitte den unten stehenden Anweisungen. Der Bindevorgang 1. Trennen Sie den Flugakku von ihrem Quadcopter. 2. Whlen Sie im Sender den Modelltyp Acro. 3. Zentrieren Sie im Sender alle Trimmungen. 4. Schalten Sie den Sender aus und reduzieren das Gas vollstndig. 5. Installieren Sie den Akku im Quadcopter. Die LED auf der 3in1 Platine blinkt rot bei der Initialisierung und dann blau, um Bindebereitschaft anzuzeigen. 6. Bringen Sie den Sender in den Bindemode whrend Sie ihn einschalten. 7. Lassen Sie den Bindeschalter nach 2 -3 Sekunden los. Der Quad-Copter ist gebunden wenn die blaue LED auf der 3-in-1 Einheit leuchtet. 8. Trennen Sie den Flugakku und schalten den Sender aus. ACHTUNG: Wenn Sie einen Futaba-Sender mit einem Spektrum DSM-Modul verwenden, mssen Sie den Gaskanal reversieren (umkehren) und danach das System neu binden. Lesen Sie bitte fr den Bindevorgang und programmieren der Failsafeeinstellungen die Bedienungsanleitung des Spektrum Modules. Zum reversieren des Gaskanals lesen Sie bitte in der Anleitung des Futaba Senders nach. Technologie Wenn Probleme auftreten beachten Sie bitte die Bindeanweisungen und schauen in die Hilfestellung zur Problemlsung. Kontaktieren Sie falls notwendig den technischen Service von Horizon Hobby. Eine Liste der kompatiblen DSM Sender sehen Sie unter www.bindn y.com. Die revolutionre SAFE Technologie von Horizon Hobby (Sensor Assited Flight Envelope) verwendet eine innovative Kombination aus Multi-Achs Sensoren und Software, die es erlauben, die relative Position des Fluggertes im Raum jederzeit zu bestimmen. Diese rumliche Information wird verwendet, um das Fluggert in einem kontrollierten Flugzustand in sicherem Abstand zum Horizont (Boden) zu bewegen. Dabei werden Roll-
und Nickwinkel beein usst und geregelt, um die Flugsicherheit zu erhhen. Sendersteuerung (RTF) Ein/Aus-LED Binden F E D Auswahl A Dual Rate D A B C Wenn die Trimmtasten gedrckt werden, geben sie einen Signalton von sich, der bei jedem erneuten Drcken hher oder tiefer wird. Die mittlere oder neutrale Trimmstellung erklingt in der mittleren Tonhhe. An den ueren Enden des Steuerbereichs erklingt eine Tonfolge. EIN/AUS-Schalter H A B C D E Modus 1 Modus 2 Querruder
(links/rechts) Gas (auf/ab) Querruder
(links/rechts) Hhenruder
(auf/ab) Gas trimm Querruder-
trimm Seitenruder-
trimm Hhenruder-
trimm Hhenruder-
trimm Querruder-
trimm Seitenruder-
trimm Gas trimm F Seitenruder
(links/rechts) Hhenruder
(auf/ab) Seitenruder
(links/rechts) Gas (auf/ab) Dual Rate (RTF) Der Glimpse RTF Quadcopter wird mit dem Blade MLP-
DDSM Sender geliefert. Wenn Sie den Sender einschalten, be ndet sich im Dual Rate in Max. Die Dual Rate Einstellung ndern Sie durch drcken des rechten Knppels. Im Low Rate Mode mit den kleinen Ruderausschlgen ist der Copter in der Schrglage limitiert und richtet sich selber aus wenn die Steuerhebel los gelassen werden. Dieser Mode ist fr Piloten geeignet die fr die ersten Flge gutmtige Reaktionen und einfache Kontrolle erwarten. Dual Rate Auswahl Im High Rate Mode ist die mgliche Schrglage grer, der Copter richtet sich aber noch selber auf wenn die Steuerhebel losgelassen werden. Erklrung der Flugkontrollen Bitte nehmen Sie sich vor dem Erst ug des Inductrix Quadcopter Zeit um sich mit den Kontrollen vertraut zu machen. Gasgeber Seitenansicht Seitenansicht Sinken Gasgeber nach oben Aufsteigen Seitenruder Gasgeber nach unten Seitenruder nach rechts Seitenruder nach links Hhenruder Hhenruder nach unten Querruder Nase dreht nach links Nase dreht nach rechts Seitenansicht Seitenansicht Vorwrts Hhenruder nach oben Rckwrts Rckansicht Rckansicht Querruder nach links Nach links Querruder nach rechts Nach rechts Fliegen des Quadcopters Die LEDs des Inductrix zeigen die Vorder und Rckseite des Quacopters an. Die weisse LED zeigt die Front, die rote LED zeigt das Heck. Starten Geben Sie Gas bis das Modell ca 60cm Hhe erreicht hat und konzentrieren Sich darauf mit dem Gashebel eine stabile Schwebe ughhe zu halten. In einigen Fllen braucht es nur ein paar kurze Hpfer um das Modell in einen niedrigen stabilen Schwebe ug zu bekommen. Schwebe ug Der Quadcopter braucht fr das Halten des Schwebe ug nur minimale Gaseingaben. Halten Sie die Gaseingaben so gering wie mglich, da groe Gasbewegungen einen Verlust der Hhe und Kontrolle mit mglichen Absturz bedeuten knnen. Whrend Sie den Schwebe ug einsteuern knnen Sie auch berprfen ob der Quadcopter in eine bestim-
mte Richtung driftet. Falls ja, landen Sie zur Einstellung das Modell. Zustzliche Informationen ber die Funktion und Anordnung der Trimmung des Modells knnen Sie dem Abschnitt der Verstehen der Flugkon-
trollen in dieser Anleitung entnehmen. Sollte die Nase des Quadcopter nach links oder rechts drehen stellen Sie die Seitenrudertrimmung ein. Sollte der Quadcopter kontinuierlich vorwrts oder rckwrts driften stellen Sie die Hhenrudertrimmung ein. Sollte der Quadcopter kontinuierlich nach links oder rechts driften stellen Sie die Querrudertrimmung ein. Trimmen Sie das Modell so weit dass es im Schwebe ug sehr wenig driftet und dazu wenig Eingaben in die Steuerung bentigt. ben Sie mit den korrekt getrimmten Copter im Schwebe ug die Wirkung von Seiten- Hhen- (Nick) und Querruder (Roll), um sich mit den Reaktionen des Copters vertraut zu machen. Halten Sie die Ruderauss-
chlge dabei so gering wie mglich. HINWEIS: Absturzschden sind nicht durch die Garantie gedeckt. Lassen Sie die Motoren zwischen den Flgen abkhlen um einen greren Verschlei zu vermeiden. Niederspannungabschaltung (LVC) Die ESC versorgt den Motor durchgehend mit weniger Leistung, bis dieser sich vollstndig abschaltet, wenn der Akku unter Last unter 9 V entladen wird. Dadurch wird eine Tiefentladung des LiPo-Akkus vermieden. Wenn die ESC die LVC aktiviert, setzen Sie sofort zur Landung an. Wenn Sie das Fluggert dennoch weiter iegen, kann dies zu Akkuschaden, Absturz oder beidem fhren. Absturzschden und Akkuschden, die durch eine Tiefentladung bedingt sind, werden von der Garantie nicht abgedeckt. Durch wiederholtes Fliegen des Helikopters bis zur LVC-Aktivierung wird der Akku des Helikopters beschdigt. Entfernen Sie den LiPo-Akku nach Gebrauch aus dem Fluggert, um eine allmhliche Entladung zu ver-
hindern. Stellen Sie whrend der Lagerung sicher, dass die Akkuladung nicht unter 3 V pro Zelle abfllt. Hilfestellung zur Problemlsung Problem mgliche Ursache Lsung Keine Reaktion auf Gas Gastrimmung oder Gasknppel Keine Funktion und riecht nach Anschluss des Flugakkus verbrannt Flugakku ist mit der falschen Polaritt angeschlossen zu hoch Sender war zu nah am Flugzeug whrend des Bindevorganges Bringen Sie Gashebel und Trimmung auf die niedrigste Einstellung Ersetzen Sie das 3-in-1 Kontrollboard. Schlieen Sie den Flugakku in richtiger Polaritt an Schalten Sie den Sender aus. Stellen Sie den Sender weiter vom Fluggert weg. Trennen und schlieen Sie den Akku erneut an den Quad-Copter an. Folgen Sie den Bindean-
weisungen Schalten Sie den Sender aus und wiederho-
len Sie den Bindeprozess LED auf dem Empfnger blinkt schnell , Quad-
copter reagiert wrend des Bindens nicht auf Sender LED auf dem Empfnger blinkt schnell, Quadcop-
ter reagiert nach dem Binden nicht auf den Sender Hebt nicht ab oder strzt nach dem Start sofort ab Teileliste Versuchen Sie den Vorgang noch einmal an einem anderen Ort Bindeschalter wurde beim Einschalten des Senders nicht gedrckt Das Fluggert oder der Sender ist zu nahe an einem Metallkrper, einer Strahlungsquelle oder einem anderen Sender Sie haben weniger als 5 Sekun-
den gewartet nachdem Sie den Sender eingeschaltet und den Flugakku angeschlossen haben Der nano QX ist an ein anderen Modellspeicher gebunden. (Betrifft nur Sender mit ModelMatch) Ladung des Flugakkus zu gering oder Senderbattereien zu schwach Ersetzen oder laden Sie die Akkus Das Fluggert oder der Sender ist zu nahe an einem Metallkrper, einer Starhlungsquelle oder einem anderen Sender Propeller falsch montiert oder falscher Flug Mode gewhlt Lassen Sie den Sender eingeschaltet. Trennen und schlieen Sie den Flugakku erneut an Whlen Sie auf dem Sender den richtigen Modellspeicher. Trennen und schlieen Sie den Flugakku erneut an Fhren Sie die notwendigen Einstellungen durch Versuchen Sie den Vorgang noch einmal an einem anderen Ort Beschreibung Inductrix RTF Inductrix BNF 3-in1 Kontrollboard: Inductrix Motor mit Kabel RD: Inductrix Motor mit Kabel LD: Inductrix Kabinenset Rot & Blau:Inductrix Propellerset weiss (4):Inductrix Hauptrahmen: Inductrix Teil #
BLH8700 BLH8780 BLH8701 BLH8702 BLH8703 BLH8704 BLH8705 BLH8706 Rechtliche Informationen fr die Europische Union EU Konformittserklrung Horizon LLC erklrt hiermit, dass dieses Produkt konform zu den essentiellen Anforder-
ungen der RED Direktive. Eine Kopie der Konformittserklrung ist online unter folgender Adresse verfgbar : http://www. horizonhobby.com/content/support-render-compliance. Anweisungen zur Entsorgung von Elektro-und Elektronik-Altgerten fr Benutzer in der Europischen Union Dieses Produkt darf nicht zusammen mit anderem Abfall entsorgt werden. Stattdessen ist der Benutzer dafr verantwortlich, unbrauchbare Gerte durch Abgabe bei einer speziellen Sammelstelle fr das Recycling von unbrauchbaren elektrischen und elektronischen Gerten zu entsorgen. Die separate Sammlung und das Recycling von unbrauchbaren Gerten zum Zeitpunkt der Entsorgung hilft, natrliche Ressourcen zu bewahren und sicherzustellen, dass Gerte auf eine Weise wiederverwertet werden, bei der die menschliche Gesundheit und die Umwelt geschtzt werden. Weitere Informationen dazu, wo Sie unbrauchbare Gerte zum Recycling abgeben knnen, erhalten Sie bei lokalen mtern, bei der Mllabfuhr fr Haushaltsmll sowie dort, wo Siedas Produkt gekauft haben. 2015 Horizon Hobby, LLC. Blade,Inductrix, E- ite, SAFE, the SAFE logo and the Horizon Hobby Logo are trademarks or registered trademarks of Horizon Hobby, LLC. Patents pending. Created 06/2015 | 49816 FR RTF/BNF Manuel dutilisation Installation de la batterie 1 Gaz en bas 2 Mise sous tension 3 REMARQUE La totalit des instructions, garanties et autres documents est sujette modi cation la seule discrtion dHorizon Hobby, LLC. Pour obtenir la documentation jour, rendez-vous sur le site horizonhobby.com et cliquez sur longlet de support de ce produit. SIGNIFICATION DE MOTS DE SIGNALISATION DE SCURIT Les termes suivants sont utiliss dans lensemble du manuel pour indiquer diffrents niveaux de danger lors de lutilisation de ce produit:
REMARQUE: Les instructions, si elles ne sont pas suivies, peuvent entrainer des dommages matriels ET blessures lgres. ATTENTION: Les instructions, si elles ne sont pas suivies, peuvent entrainer des dommages matriels ET blessures. ATTENTION: Lire et suivre toutes les instructions et mises en garde du manuel avant le rglage et lutilisation. Une mauvaise utilisation du produit peut endommager ce dernier, vos biens et/ou entrainer des blessures. Ceci est un produit de loisirs sophistiqu. Il doit tre manipul avec prudence et bon sens et requiert des aptitudes de base en mcanique. Nessayez pas de dmonter le produit, de lutiliser avec des composants incompatibles ou den amliorer les performances sans laccord dHorizon Hobby, LLC. 14 ans et plus. Ceci nest pas un jouet. Prcautions de scurit lors de lutilisation En tant quutilisateur de ce produit, vous tes responsable de la scurit lors de son utilisation, de ne pas mettre en danger les autres et vous-mme ou des dommages causs ce produit et aux biens des autres. Utilisez ce produit dans un endroit ouvert lcart des autres et des habitations. Prcautions de scurit gnrales du produit Gardez toutes les batteries, produits chimiques, petites pices et systme lectriques hors de porte des enfants. Avertissements de charge Nutilisez jamais ce produits avec des composants lectriques endommags. Gardez lmetteur sous tension quand le modle est sous tension. Laissez les pices refroidir avant de les toucher, le moteur chauffera lors de lutilisation. Dbranchez la batterie aprs utilisation , si applicable. Ne pas mettre en contact avec leau. Gardez toutes les pices sches. Gardez les pices mobiles propres. AVERTISSEMENT: Le non-respect de ces avertissements peut entrainer un mauvais fonctionnement du produit, des problmes lectriques, une surchauffe, INCENDIE et terme blessures et dommages matriels. NE LAISSEZ JAMAIS DES BATTERIES EN CHARGE SANS SURVEILLANCE OU EN CHARGE LA NUIT. Ne jamais mettre des batteries endommages en charge. Si la batterie commence gon er lors de la charge ou lutilisation, dbranchez-la immdiatement. Utilisez toujours la batterie et le chargeur fournis. Dbranchez la batterie aprs charge. Chargez les batteries lcart de matires in ammables dans un endroit bien ar. Ne chargez, transportez ou stockez jamais dans un endroit chaud, froid ou trs ensoleill (temprature recommande entre 5 et 49). lments Modle Blade Inductrix Moteurs 6mm Brushed Electronique embarque Platine 3 en 1 Mixage/Vario/Gyro Batterie Li-Po 150mAh 1S 3.7V 25C Chargeur USB pour Li-Po 1S 300 mAh Emetteur MLP4DSM RTF Inclus Installs Installs Inclus Inclus Inclus BNF Inclus Installs Installs Inclus Inclus Requis Spcifications 83mm 28mm Longueur Hauteur Pour enregistrer votre produit en ligne, veuillez visiter www.bladehelis.com Charge de la batterie Diamtre du rotor principal Poids de vol 65mm 16 g REMARQUE: Chargez uniquement des batteries froides au toucher et non endommages. Contrlez ltat de la batterie pour tre srt quelle nest pas endommage, gon e, plie ou perce. Insrez le chargeur dans un port USB. Connectez la batterie au chargeur. CHARGE (Rouge xe) CHARGE MAX (OFF ) Toujours dconnecter la batterie du chargeur immdiatement aprs la n de charge. USB Li-Po Charger DC Input:5.0V 350mA DC Output:4.2V 300mA SOLID RED LED Charging LED OFF Charge Complete EFLC1008 4 ATTENTION: Toujours dbrancher la batterie du modle quand vous ne lutilisez pas, a n dviter une dcharge trop impor-
tante. Des batteries dcharges un voltage infrieur celui recommand, seront endommages, elles perdront en performance et pourront entraner un risque dincendie durant la charge. Aff ectation de lmetteur et du rcepteur L'metteur de la version RTF est livr dj affect au modle. Si vous devez refaire l'affectation, suivez les instructions ci-dessous. Procedure daff ection de lmetteur MLP4DSM 1. Dbranchez la batterie du quadcoptre. 2. Mettez tous les trims au neutre. 3. Mettez l'metteur hors tension et placez le manche des gaz en position basse. 4. Connectez la batterie au quadcoptre. La DEL du module 4 en 1 clignote en rouge durant l'initialisation, puis clignote en bleu quand il est prt pour l'affectation. 5. Lorsque la lumire bleue clignote, appuyez sur la manche gauche et maintenez-le appuy lors de la mise en marche de lmetteur (vous entendrez un click et une longue tonalit). 6. Relchez le manche de gauche. Lmetteur va se mettre biper et la DEL dalimentation clignoter. Le quadcoptre est affect quand la DEL bleue devient xe. 7. Dbranchez la batterie et mettez lmetteur hors tension. Le quadcoptre Inductrix ncessite aucune programmation radio particulire pour le vol basique. Si vous utilisez un metteur programmable, slectionnez une mmoire modle vierge, slectionnez Acro ou Avion en type de de modle et effectuez laffectation. Pour affecter ou r-affecter votre Inductrix votre metteur, suivez les instructions suivantes. Procdure daff ectation 1. Dbranchez la batterie du le quadcoptre. 2. Slectionnez dans votre metteur "Acro" ou "Avion" comme type de modle. 3. Mettez tous les trims de votre metteur au neutre. 4. Mettez l'metteur hors tension et placez le manche des gaz en position basse. 5. Connectez la batterie au quadcoptre. La DEL du module 4 en 1 clignote en rouge durant l'initialisation, puis clignote en bleu quand il est prt pour l'affectation. 6. Mettez votre metteur en mode affectation (Bind). 7. Relchez le bouton/interrupteur Bind aprs 2 ou 3 secondes. Le quadcoptre est affect quand la DEL est xe. 8. Dbranchez la batterie et mettez lmetteur hors tension. ATTENTION: Si vous utilisez un metteur Futaba avec un module Spektrum DSM2/DSMX, il vous faudra inverser la voie de la manette des gaz et effectuer nouveau laffectation. Rfrez-vous au manuel dutilisation du module Spektrum pour les instructions daffectation et de scurit failsafe. Rfrez-vous au manuel dutilisation de lmetteur Futaba pour les instructions dinversion de voie de la manette des gaz. Si vous rencontrez des dif cults, rfrez-vous au guide de dpannage. Si ncessaire, contactez votre revendeur ou le service technique Horizon Hobby. Pour consulter la liste des metteurs compatibles, veuillez visiter www.bindn y.com. La technologie rvolutionnaire SAFE (Systme dentranement assist par capteurs) utilise la combinaison de capteurs sur diffrents axes et un logiciel permettant au modle de connatre sa position par rapport lhorizon. Cette reconnaissance de lespace est utilise pour gnrer un domaine de vol scuris en limitant les angles a n de piloter en scurit. Contrle de lmetteur (RTF) Technologie DEL dalimentation ATTENTION: Utilisez uniquement des chargeurs spci quement conus pour charger la bat-
terie Li-Po incluse. Le fait de charger la batterie avec un chargeur non-compatible peut tre lorigine dun incendie provoquant des blessures corporelles ou des dgts matriels. Affectation ATTENTION: Ne jamais dpasser lintensit de charge recommande. ATTENTION: Dbranchez immdiatement la batterie une fois que la charge est termine. Ne jamais laisser une batterie connecte au chargeur. Installation des piles de lmetteur (RTF) F E D Slection des S dbattements d A B C Installez les piles AA en respectant les polarits. Remplacez les piles quand la DEL de lmetteur clignote et que le bip retentit. Nous vous recommandons dutiliser uniquement des piles alcalines AA, cependant il est possible dutiliser des accus NiMH rechargeables. ATTENTION: Ne rechargez que des batteries rechargeables. Si vous tentez de charger des piles non rechargeables, il y a un risque dincendie entranant des blessures et des dgts matriels. Lorsquils sont enfoncs, les boutons de trim font un bruit qui augmente ou diminue en intensit chaque pression. La position intermdiaire ou neutre du trim utilise une tonalit de milieu de gamme. Une srie de bips sonores indique la n de la plage de contrle. Commutateur ON/OFF H A B Mode 1 Mode 2 Ailerons (Gauche/Droit) Gaz (Haut/Bas) Ailerons (Gauche/Droit) Profondeur (Haut/Bas) Trim des gaz Trim de profondeur C Trim dailerons Trim dailerons F D E Trim de profondeur Drive (Gauche/Droit) Trim de Profondeur (Haut/Bas) drive drive Trim des gaz Drive (Gauche/Droit) Trim de Gaz (Haut/Bas) Slection du dbattements (RTF) Le quadcoptre Inductrix RTF est livr avec lmetteur Blade MLP4DSM. Quand lmetteur est mis sous tension, il est automatiquement plac en grands dbattements. Changez de dbattements en pressant puis relchant le manche de droite. En mode petits dbattements, le quadcoptre a un angle limit et sauto-stabilisera lorsque vous relchez les manches. Ce mode est prfrable pour les pilotes qui veulent un contrle plus doux lors de la premire utilisation. Slection des dbattements En mode grands dbattements, le quadcoptre a un angle plus grand et sauto-stabilisera lorsque vous relchez les manches. Comprhension des commandes de vol de base Si vous navez pas encore bien assimil les commandes de votre quadcoptre Inductrix, prenez quelques minutes pour vous familiariser avec elles avant de tenter votre premier vol. Throttle (Gaz) Vue latrale Descendre Vue latrale Coupure par tension faible (LVC) Le CEV (ESC) ne cessera de diminuer la puissance fournie au moteur jusqula coupure complte lorsque la batterie atteint une tension de 3Vsous charge. Ceci permet dviter que la batterie Li-Po ne subisse une dcharge trop profonde. Posez-vous immdiatement lorsque le CEV active la coupure par tension faible (LVC). Continuer voler aprs une coupure par tension faible (LVC = Low Voltage Cutoff) peut endommager la batterie ou entraner un crasement au sol, voire les deux. Les dommages suite un crasement au sol et des batteries endommages suite une dcharge trop profonde ne sont pas couvertes par la garantie. Faire constamment voler lhlicoptre jusquce que la coupure par tension faible (LVC) sactive, endommagera la batterie de lhlicoptre. Dconnectez et sortez la batterie Li-Po de lavion aprs utilisation a n dviter une dcharge au goutte goutte. Pendant le stockage, assurez-vous que la charge de la batterie ne tombe pas en-de de 3Vpar cellule. Guide de rsolution des problmes Problme Cause possible Solution Aucune rponse aux gaz Ne fonctionne pas et dgage une odeur de brl aprs avoir branch la batterie Le manche des gaz et/ou le trim est galement trop haut Baissez le manche des gaz et placez le trim la valeur la plus basse La polarit de la batterie na pas t respecte Remplacez le module 3 en 1. Branchez la batterie en respectant la polarit Augmenter les gaz Monter Gouverne de direction Rduire les gaz Gouverne de direction gauche Gouverne de direction droite Le nez tourne vers la gauche Le nez tourne vers la droite Gouverne de profondeur Vue latrale Vue latrale Gouverne de profondeur baisse Ailerons Vers lavant Gouverne de profondeur leve Vers larrire Vue arrire Vue arrire La DEL du rcepteur clignote rapidement et lappareil ne rpond pas aux commandes
(durant laffectation) La DEL du rcepteur clignote rapidement et lappareil ne rpond pas aux commandes
(aprs laffectation) Lmetteur est trop prs de lappareil durant laffectation Le bouton ou l'interrupteur d'affectation n'a pas t maintenu durant la mise sous tension de l'metteur L'appareil ou l'metteur se trouve trop proche d'un grand objet mtallique, d'un rseau sans l ou d'un autre metteur Moins de 5 secondes se sont coules entre lallumage de lmetteur et la connexion de la batterie de vol sur le quadcoptre Le quadcoptre est affect une mmoire de modle diffrente
(radios ModelMatch uniquement) Charge des batteries de lmetteur trop faible L'appareil ou l'metteur se trouve trop proche d'un grand objet mtallique, d'un rseau sans l ou d'un autre metteur Les hlice ne sont pas correcte-
ment places ou vous navez pas slectionn la bonne configuration Mettez lmetteur hors tension. Eloignez-le de lappareil. Dbranchez puis rebranchez la batterie. Suivez les instructions daffectation Mettez l'metteur hors tension et rp-
tez le processus d'affectation Placez l'avion et l'metteur un autre emplacement et retentez l'affectation Laissez lmetteur sous tension. Dbranchez puis rebranchez la batterie du le quadcoptre Slectionnez la mmoire de modle correcte sur lemetteur. Dbranchez puis rebranchez la batterie du le quad-
coptre Remplacez ou chargez les batteries de lemetteur Placez l'avion et l'metteur un autre emplacement et retentez la connexion Effectuez les modifications ncessaires Chute immdiatement aprs le dcollage ou ne dcolle pas du tout Liste des pices dtaches Aileron gauche Gauche Aileron droite Droite Vol du quadcoptre Les DELs sur lInductrix indique lavant et larrire du quadcoptre. Les DELs blanches sont lavant. Les DELs rouges sont larrire. Dcollage Mettez les gaz de faon dcoller 60 cm au-dessus du sol et concentrez vous sur le manche des gaz a n de garder cette altitude pour effectuer un vol stationnaire. Dans certains cas, vous devrez faire quelques sauts de quelques centimtres de hauteur pour vous familiariser avec la commande de gaz pour maintenir une altitude constante. Stationnaire Le quadcoptre Glimpse ne ncessite que de corrections mineures aux gaz pour maintenir une altitude constante en stationnaire. Ne donnez pas de corrections trop brutales ou importantes qui risqueraient dentraner une perte de contrle pouvant causer un crash. Avant de tenter un stationnaire au ras du sol, vous devez vri er que le quadcoptre ne glisse pas, sinon effectuer les corrections laide des trims. Si vous trouvez que le modle glisse trop sans agir sur le manches, faites-le atterrir avant deffectuer les corrections aux trims. Pour plus dinformation concernant le contrle du modle, rfrez-vous la section Apprentissage des commandes de base. Si le nez du quadcoptre pivote vers la gauche ou la droite, ajuster le trim de drive. Si le quadcoptre glisse vers lavant ou larrire, ajustez le trim de profondeur. Si le quadcoptre glisse vers la gauche ou la droite, ajustez le trim dailerons. Continuez deffectuer de lgres corrections aux trims en faisant un stationnaire basse altitude. Si le quadcoptre est votre premier quadricoptre, nhsitez demander laide dun pilote expriment pour effectuer ces rglages avant votre premier vol. Avec votre quadcoptre correctement rgl et en stationnaire basse altitude, entrainez-vous utiliser les commandes de drive, de profondeur et dailerons a n de vous familiariser avec la rponse du modle. Toujours effectuer de petits mouvements avec les manches de commande. REMARQUE: les dgts causs par les crashs ne sont pas couverts par la garantie. Pour viter une usure excessive des moteurs, laissez toujours les moteurs refroidir entre les vols. Inductrix RTF Inductrix BNF Inductrix - Module 3 en 1 Inductrix - Moteur rotation horaire Inductrix - Moteur rotation anti-horaire Inductrix - Fuselage rouge et bleu Inductrix - Set dhlices (4), Blanches Inductrix - Chssis Rf. pice Description BLH8700 BLH8780 BLH8701 BLH8702 BLH8703 BLH8704 BLH8705 BLH8706 Information IC Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Informations de conformit pour lUnion europenne Dclaration de conformit de lunion europenne :
Horizon Hobby, LLC dclare par la prsente que ce produit est en conformit avec les exigences essentielles et les autres dispositions de la directive RED. Une copie de la dclaration de conformit Europenne est disponible : http://www.horizonhobby. com/content/support-render-compliance. Elimination dans lUnion Europenne Ce produit ne doit pas tre limin avec les ordures mnagres. Il est de la res-
ponsabilit de lutilisateur de remettre le produit un point de collecte of ciel des dchets dquipements lectriques. Cette procdure permet de garantir le respect de lenvironnement et une meilleure gestion des ressources naturelles. Elle protge de plus le bien-tre de la communaut humaine. Pour plus dinformations quant aux lieux dliminations des dchets dquipements lectriques, vous pouvez contacter votre mairie ou le service local de traitement des ordures mnagres. 2015 Horizon Hobby, LLC. Blade,Inductrix, E- ite, SAFE, the SAFE logo and the Horizon Hobby Logo are trademarks or registered trademarks of Horizon Hobby, LLC. Patents pending. Created 06/2015 | 49816 IT RTF/BNF Manuale di Istruzioni Installazione della batteria di volo AVVISO Tutte le istruzioni, le garanzie e gli altri documenti pertinenti sono soggetti a cambiamenti a totale discrezione di Horizon Hobby, LLC. Per una documentazione aggiornata sul prodotto, visitare il sito horizonhobby.com e fare clic sulla sezione Support del prodotto. SIGNIFICATO DELLE AVVERTENZE DI SICUREZZA Nella documentazione relativa al prodotto vengono utilizzati i seguenti termini per indicare i vari livelli di pericolo potenziale durante luso del prodotto:
AVVISO: Istruzioni che, se non seguite, possono determinare la possibilit di danni alle cose E di lesioni lievi alle persone. ATTENZIONE: Istruzioni che, se non seguite, possono determinare la probabilit di danni alle cose E la possibilit di lesioni alle persone. ATTENZIONE: leggere e seguire tutte le istruzioni e avvertenze riportate nel manuale prima dellimpostazione o delluso. Un uso improprio del prodotto pu causare danni al prodotto stesso, alle cose e/o lesioni alle persone. Questo un prodotto so sticato per appassionati. Deve essere azionato in maniera attenta e responsabile e richiede alcune conoscenze basilari di meccanica. Non usare componenti non compatibili o alterare il prodotto in nessuna maniera al di fuori delle istruzioni fornite da Horizon Hobby LLC. Almeno 14 anni. Non un giocattolo. Precauzioni per la sicurezza durante luso Come utenti di questo prodotto, siete responsabili per un utilizzo sicuro del prodotto, non mettendo in pericolo voi stessi o altri o non danneggiando il prodotto o le cose di altri. Utilizzare il prodotto in spazi aperti, lontano da persone e cose. Precauzioni di sicurezza del prodotto generali Tenere tutte le batterie, le sostanze chimiche, le parti piccole e tutte le componenti elettriche fuori dalla portata dei bambini. Avvertenze e istruzioni per le batterie Non usare mai il prodotto con delle componenti elettriche danneggiate. Lasciare la trasmittente accesa quando il modello acceso. Lasciare raffreddare le componenti dopo luso prima di toccarle, i motori si scalderanno durante luso. Rimuovere le batterie dopo luso, se possibile. Evitare il contatto con lacqua di questo prodotto. Mantenere asciutte le componenti. Mantenere pulite le parti mobili. AVVERTENZA: Non seguendo le seguenti avvertenze potrebbero veri carsi malfunzionamenti del prodotto, problemi elettrici, un eccessivo sviluppo di calore, INCENDI e in de nitiva lesioni e danni materiali. NON CARICARE MAI LE BATTERIE DURANTE LA NOTTE SENZA SUPERVISIONE. Non caricare mai le batterie danneggiate. Se durante la carica o durante luso si forma un rigon amento della batteria, interrompere direttamente luso/la carica. Usare sempre la batteria e il caricabatteria inclusi nella confezione. Sconnettere la batteria dopo la carica. Caricare sempre le batterie lontano da materiali in ammabili in un luogo ben ventilato. Non caricare, trasportare o conservare mai le batterie in ambienti estremamente caldi, freddi o esposti al sole (la temperatura consigliata compresa tra 5 e 49 C). Componenti Telaio Blade Inductrix Motori 6mm Brushed Elettronica di bordo 3-in-1 mixer/ESCs/Gyro Batteria 150mAh 1S 3.7V 25C Li-Po Caricabatteria caricabatteria USB 1S LiPo, 300 mAh Trasmittente MLP4DSM RTF Incluso Installato Installato Incluso Incluso Incluso BNF Incluso Installato Installato Incluso Incluso Necessario Specifiche Lunghezza Altezza Per registrare il prodotto online, visitare il sito www.bladehelis.com Carica della batteria di volo Diametro elica Peso in volo 83mm 28mm 65mm 16 g AVVISO: caricare solo batterie che siano fredde al tatto e che non siano danneggiate. Controllare la batteria per veri care che non sia gon a, piegata, rotta o bucata. Inserire il caricatore in una porta USB. Connettere la batteria al caricabatteria. Carica in corso (acceso rosso) Carica massima (spento) Scollegare sempre la batteria dal caricatore immediatamente dopo il termine della carica. USB Li-Po Charger DC Input:5.0V 350mA DC Output:4.2V 300mA SOLID RED LED Charging LED OFF Charge Complete EFLC1008 ATTENZIONE: usare solo caricatori progettati speci camente per queste batterie LiPo. In caso contrario si potrebbero incendiare procurando danni. ATTENZIONE: non superare le correnti di carica raccomandate. ATTENZIONE: quando la carica terminata, scollegare subito la batteria dal caricatore. Installazione batterie nella trasmittente (RTF) Inserire le pile AA nel trasmettitore facendo attenzi-
one alla polarit. Bisogna sostituirle quando il LED lampeggia e si attiva un allarme sonoro (beep). Noi raccomandiamo di usare solo pile alcaline AA nel trasmettitore, comunque possibile usare anche batterie ricaricabili NiMH. ATTENZIONE: se si usano batterie ricaricabili, si raccomanda di ricaricare solo queste. Se si tenta di ricaricare pile non ricaricabili, si potrebbe provocarne lo scoppio con conseguenti ferite alle persone e danni alle cose. 1 Stick motore in basso 2 Posizione ON 3 4 ATTENZIONE: scollegare sempre la batteria LiPo dallaereo quando non si deve volare, per evitare di sovrascaricarla. Le batterie scaricate al di sotto della soglia minima approvata, si potrebbero danneggia-
re perdendo capacit o anche incendiarsi quando si tenta di ricaricarle. Connessione (binding) fra trasmettitore e ricevitore Il trasmettitore RTF viene fornito gi connesso al modello. Se serve rifare la connessione, si prega di osservare le seguenti indicazioni. Procedura di binding con trasmettitore MLP4DSM 1. Scollegare la batteria dal quadricoptero. 2. Centrare tutti i trim sul trasmettitore. 3. Spegnere la trasmittente e portare lo stick del motore completamente in basso. 4. Collegare la batteria di bordo al quadricottero. Il LED dell'unit di controllo 4 in 1 lampeggia in rosso durante l'inizializzazione, poi lampeggia in blu quando pronto per la connessione (bind). Scelta della corsa (RTF) Il quadricoptero Inductrix nella versione RTF arriva con una trasmittente Blade MLP4DSM. Quando si accende, il trasmettitore si trova in corse massime. Per cambiare di corsa premere e rilasciare lo stick di destra. Nella modalit low rate, langolo di virata del quadricoptero limitato e rilasciando entrambi gli stick, il quadricoptero si auto-livella. Questa modalit tipicamente viene scelta da piloti che preferiscono un controllo pi semplice e docile durante i primi voli. Selezione dual rate Nella modalit high rate, langolo di virata del quadricoptero pi ampio e rilasciando entrambi gli stick, il quadricoptero si auto-livella. Informazioni sui comandi di volo principali Se non avete ancora familiarit con i comandi del vostro quadricoptero Glimpse necessario dedicare alcuni minuti per familiarizzarsi con essi prima di tentare il primo volo. Throttle Vista laterale Vista laterale Discesa Throttle alzato Salita Throttle abbassato 5. Quando il LED blu lampeggia, mantenere premuto lo stick sinistro mentre si accende la trasmittente
(si deve sentire un clic e un beep lungo). Timone 6. Rilasciare lo stick di sinistra. Il trasmettitore emette un beep e il suo LED lampeggia. Il quadricoptero connesso quando il LED blu sullunit di controllo resta acceso con luce ssa. 7. Scollegare la batteria dal modello e spegnere il trasmettitore. Il quadricoptero Inductrix non richiede impostazioni speci che della trasmittente per eseguire il volo standard. Usando una trasmittente computerizzata, basta collegare (bind) il quadricoptero alla trasmit-
tente, selezionando il tipo di modello Acro o Aereo. Per connettere (bind) le quadricoptero al trasmettitore scelto, si prega di seguire le indicazioni riportate qui di seguito. Procedura generale per la connessione (binding) 1. Scollegare la batteria dal quadricoptero. 2. Selezionare "Acro" come tipo di modello nelle impostazioni della trasmittente. 3. Centrare tutti i trim sulla trasmittente. 4. Spegnere la trasmittente e portare lo stick motore completamente in basso. 5. Collegare la batteria di bordo al quadricottero. Il LED dellunit di controllo 4 in 1 lampeggia in rosso durante linizializzazione, poi lampeggia in blu quando pronto per la connessione (bind). 6. Mettere il trasmettitore nel modo bind e accenderlo. 7. Rilasciare il pulsante/interruttore di bind dopo 2-3 secondi. Il quadricoptero connesso quando il LED blu sullunit di controllo resta acceso con luce ssa. 8. Scollegare la batteria dal modello e spegnere il trasmettitore. Timone a sinistra Elevatore Elevatore abbassato Alettone Timone a destra La fusoliera vira a sinistra La fusoliera vira a destra Vista laterale Vista laterale Avanti Elevatore alzato Indietro Vista posteriore Vista posteriore ATTENZIONE: Quando si utilizza un trasmettitore Futaba con un modulo Spektrum DSM, necessario invertire il canale del gas ed effettuare nuovamente il Binding. Consultare il manuale del vostro modulo Spektrum per settare nuovamente il Bind ed il FailSafe. Consultate il manuale della vostra trasmittente per effettuare linversione del canale del gas. Se si incontrassero problemi, osservare le istruzioni per il binding e far riferimento alla guida per la soluzione dei problemi per ulteriori istruzioni. Se necessario contattare il servizio assistenza Horizon. Per un elenco completo dei trasmettitori DSM compatibili visitare il sito www.bindn y.com. La rivoluzionaria tecnologia SAFE usa una combinazione innovativa di sensori ad assi multipli e un software che permette al modello di conoscere la sua posizione relativa allorizzonte. Questo riferimento spaziale viene utilizzato per creare un inviluppo di volo controllato che il velivolo usa per mantenersi con angoli di rollio tali da permettere un volo pi sicuro. Controllo trasmettitore (RTF) Tecnologia Connessione
(bind) F E D LED di alimentazione Scelta della S riduzione di ri corsa c A B C Interruttore ON/OFF Se premuti, i pulsanti dei trim emettono un suono che aumenta o diminuisce di intensit a ogni pressione. La posizione del trim intermedia o neutra associata a un tono medio nellintervallo di passo dei suoni. La ne del campo di controllo segnalata da una serie di beep. A Alettone
(Sinistra/Destra) Throttle
(Su/Gi) Alettone
(Sinistra/Destra) Elevatore
(Su/Gi) Modalit 1 Modalit 2 B C D E Trim del throttle Trim dellalettone Trim del timone Trim dellelevatore Trim dellelevatore Trim dellalettone Trim del timone Trim del throttle F Timone
(Sinistra/Destra) Elevatore
(Su/Gi) Timone
(Sinistra/Destra) Throttle
(Su/Gi) Alettone a sinistra Sinistra Alettone a destra Destra Volo del Quadricoptero I LED dellInductrix indicando la parte anteriore e posteriore del quadricoptero. I LED bianchi indicano la parte anteriore e i LED rossi indicano la parte posteriore. Decollo Agire sullacceleratore nch il modello si alza di circa 60 cm da terra e concentrarsi sul comando motore per fare in modo che il quadricoptero mantenga costante questa quota in volo stazionario. Inizialmente ci sar qualche piccolo salto di quota, nch non si familiarizza sui comandi necessari per mantenere il modello in volo stazionario ad una quota costante. Hovering Lo Glimpse richiede degli aggiustamenti minimi sul comando motore per mantenere la quota. Bisogna tenere ben presente che questi aggiustamenti devono essere il pi possibile ridotti, perch i comandi troppo ampi portano a perdere il controllo e, di conseguenza, a causare una caduta. Mentre si tenta di stabilizzare il volo stazionario a bassa quota, conviene controllare se sono neces-
sarie delle regolazioni sui trim per evitare una deriva costante in varie direzioni. Se si notano queste derive senza aver dato alcun comando direzionale, conviene far atterrare il modello prima di fare qual-
siasi regolazione con i trim. Altre informazioni sulla posizione e il funzionamento dei trim, si trovano nella sezione Capire i controlli primari di volo su questo manuale. Se il naso dello nano QX ruota verso destra o sinistra, regolare il trim del timone. Se lo nano QX si sposta continuamente in avanti o indietro, allora bisogna intervenire sul trim dellelevatore. Se lo nano QX si sposta continuamente a destra o a sinistra, allora bisogna intervenire sul trim dellalettone. Si continui a fare piccole regolazioni sui trim nch il modello resta in volo stazionario con una deriva minima e controlli ridotti. Se questo il vostro primo modello di quadricoptero, vi conviene chiedere laiuto di un modellista esperto in questo campo, specialmente per il primo volo. Quando il quadricoptero trimmato correttamente e si trova in volo stazionario a bassa altezza, provare ad usare i controlli di direzionale, elevatore e alettone per familiarizzare con le risposte del quadricoptero ai vostri comandi. Ricordarsi di usare una quantit di comandi limitata. AVVISO: I danni da incidente non sono coperti dalla garanzia. Per prevenire unusura eccessiva dei motori, lasciarli raffreddare sempre tra un volo e laltro. Taglio di bassa tensione (LVC) Il controllo elettronico di velocit continuer ad abbassare la corrente erogata al motore no allo spe-
gnimento completo quando la batteria raggiunge i3Vsotto carico. Questo fa si che si possa evitare una scarica eccessiva della batteria Li-Po. Effettuare immediatamente latterraggio quando il regola-
tore di velocit attiva il taglio di bassa tensione (LVC). Continuare afar volare il modello dopo che ha raggiunto il taglio di bassa tensione (LVC) pu danneggiare la batteria, causare lo schianto del velivolo oentrambe le cose. Idanni della batteria oquelli dovuti allo schianto in seguito auno scaricamento eccessivo non sono coperti dalla garanzia. Far volare lelicottero no allattivazione del taglio di bassa tensione (LVC) danneggia la batteria dellelicottero. Dopo luso scollegare erimuovere dal velivolo la batteria Li-Po per evitare lo scaricamento passivo. Durante la conservazione, assicurarsi che la carica della batteria non scenda sotto i3 Vper cella. Guida alla soluzione dei problemi Problema Possibile causa Soluzione Il quadricoptero non risponde al comando del gas Il quadricoptero non funziona ed emette odo-
re di bruciato dopo aver connesso la batteria ll LED sulla ricevente lampeggia velocemente e il qaudricoptero non risponde alla trasmitten-
te (durante il binding) Il LED della ricevente lampeggia rapidamente ed il quadricoptero non risponde alla trasmitten-
te (dopo aver effettuato il binding) Cade direttamente dopo il decollo o non decolla Elenco delle parti Stick e/o trim del motore troppo in alto Resettare i controlli con stick e trim completamente in basso Batteria di bordo collegata con polarit invertita Trasmettitore troppo vicino al modello durante la procedura di binding Sostituire il circuito del 4-in-1. Collegare la batteria di bordo facendo attenzione alla polarit Spegnere il trasmettitore. Allontanare il tra-
smettitore allaereo. Scollegare e ricollegare la batteria di bordo. Ripetere la procedura di binding seguendo le istruzioni Lasciare acceso il trasmettitore. Scollegare e ricollegare la batteria allo quadricottero Spostare il modello e il trasmettitore in un altro posto prima di ripetere la procedura Spegnere il trasmettitore e ripetere la procedura Il comando per il "bind" non stato premuto all'accensione del trasmettitore Il modello o il trasmettitore sono troppo vicini a grossi oggetti me-
tallici, sorgenti WiFi o ad un altro trasmettitore Non sono passati 5 secondi dallaccensione del trasmettitore al collegamento della batteria di bordo Lo quadricottero connesso ad una memoria diversa (solo tra-
smettitori con ModelMatch) Batteria di bordo o del trasmettitore quasi scariche Il modello o il trasmettitore sono troppo vicini a grossi oggetti me-
tallici, sorgenti WiFi o ad un altro trasmettitore Eliche nella posizione sbagliata o modalit di volo scelta non corretta Effettuare le regolazioni necessarie Sostituire o ricaricare le batterie Scegliere la memoria giusta sul trasmetti-
tore. Scollegare e ricollegare la batteria allo quadricottero Spostare il modello e il trasmettitore in un altro posto prima di ripetere la procedura Part #
BLH8700 BLH8780 BLH8701 BLH8702 BLH8703 BLH8704 BLH8705 BLH8706 Informazioni sulla conformit per lUnione Europea Descrizione Inductrix RTF Inductrix BNF Unit di controllo 3-in-1: Inductrix Motore con cavo, rotazione oraria: Inductrix Motore con cavo, rotazione anti-oraria: Inductrix Set capottine, rosso & blu: Inductrix Set eliche (4), bianco: Inductrix Telaio principale: Inductrix Dichiarazione di Conformit EU:
Horizon Hobby, LLCcon la presente dichiara che il prodotto conforme ai requisiti es-
senziali e ad altre disposizioni rilevanti della direttiva RED. Una copia della dichiarazione di conformit per lUnione Europea disponibile a: http://www.horizon-
hobby.com/content/support-render-compliance. Istruzioni del RAEE per lo smaltimento da parte di utenti dellUnione Europea Questo prodotto non deve essere smaltito assieme ai ri uti domestici. Al contrario, lutente responsabile dello smaltimento di tali ri uti che devono essere portati in un centro di raccolta designato per il riciclaggio di ri uti elettrici e apparecchiature elet-
troniche. La raccolta differenziata e il riciclaggio di tali ri uti provenienti da apparec-
chiature nel momento dello smaltimento aiuteranno a preservare le risorse naturali e garantiranno un riciclaggio adatto a proteggere il benessere delluomo e dellambiente. Per maggiori informazioni sui centri di raccolta, contattare il proprio uf cio locale, il servizio di smaltimento ri uti o il negozio presso il quale stato acquistato il prodotto. 2015 Horizon Hobby, LLC. Blade,Inductrix, E- ite, SAFE, the SAFE logo and the Horizon Hobby Logo are trademarks or registered trademarks of Horizon Hobby, LLC. Patents pending. Created 06/2015 | 49816
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-03-07 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment | |
2 | 2404 ~ 2476 | DXX - Part 15 Low Power Communication Device Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2018-03-07
|
||||
1 2 | Applicant's complete, legal business name |
Horizon Hobby, LLC
|
||||
1 2 | FCC Registration Number (FRN) |
0006301931
|
||||
1 2 | Physical Address |
2904 Research Rd.
|
||||
1 2 |
Champaign, Illinois 61821
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
t******@siemic.com
|
||||
1 2 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
1 2 |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
BRW
|
||||
1 2 | Equipment Product Code |
BLH8701
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
C******** D****
|
||||
1 2 | Title |
President and EVP Product Management and Marketing
|
||||
1 2 | Telephone Number |
217-4********
|
||||
1 2 | Fax Number |
217-4********
|
||||
1 2 |
c******@horizonhobby.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 2 | DXX - Part 15 Low Power Communication Device Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Inductrix | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
SIEMIC (Shenzhen-China) Laboratories
|
||||
1 2 | Name |
M****** H******
|
||||
1 2 | Telephone Number |
+ (86********
|
||||
1 2 |
a******@cn.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2404.00000000 | 2476.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC