all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
User Manual | Users Manual | 1.87 MiB | ||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Attestation Statements | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Setup Photos |
1 2 3 | User Manual | Users Manual | 1.87 MiB |
20-Channel 2.4GHz DSMX Aircraft System QuickStart Guide Schnellstartanleitung Guide de Dmarrage Guida Rapida NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby,LLC. For up-to-date product literature, visit www.horizonhobby.com or www.towerhobbies.com and click on the support or resources tab for this product. Meaning of Special Language The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:
WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high probability of superfi cial injury. CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury. NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no possibility of injury. WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not attempt disassembly, use with incompatible components or alter product in any way without the approval of Horizon Hobby, LLC. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury. Age Recommendation: Not for children under 14. This is not a toy. NOTICE: This product is only intended for use with unmanned, hobby-grade, remote-controlled vehicles and aircraft. Horizon Hobby disclaims all liability outside of the intended purpose and will not provide warranty service related thereto. WARRANTY REGISTRATION Visit www.spektrumrc.com/registration today to register your product. Safety Precautions Always ensure all batteries have been properly charged prior to using the model. Always check all servos and their connections prior to each run. Never operate your model near spectators, parking areas or any other area that could result in injury to people or damage of property. Never operate your model during adverse weather conditions. Poor visibility can cause disorientation and loss of control of your model. Never point the transmitter antenna directly toward the model. The radiation pattern from the tip of the antenna is inherently low. If at any time during the operation of your model you observe any erratic or abnormal operation, immediately stop operation of your model until the cause of the problem has been ascertained and corrected. 2 Speci cations 20 250 Channels Model Memory Programming Options Airplane/Helicopter/
Sailplane/Multirotor DSM2/DSMX 2.4GHz Modulation Band Resolution Frame Rate Modes Battery Type Charger Power Supply
(not included) 2048 11/22 Ms User Selectable Mode 1-4 Lithium Ion 10,500mAh 2-3A minimum output Function 30 Rudder Trim (Mode 1,2) Aileron Trim (Mode 3,4) 31 Throttle Strap Adjustment (Mode 2,4) 32 Elevator Trim (Mode 1,3) Throttle Trim (Mode 2,4) 33 Right Rear Lever 34 Camera Lens 35 Micro Memory Card Port 36 USB Charge Port 37 Battery Cover 38 Left Rear Lever 39 Serial Interface Port 40 Audio Jack 41 Left Trim 42 Power Button 43 LED 44 Right Trim 21 23 25 24 38 39 40 Transmitter Functions Function 1 Antenna 2 LCD Touchscreen 3 Switch E2 4 Right Knob 5 Switch E 6 Right Top Trim 7 Switch H 8 Switch G 9 Switch F 10 Throttle Strap Adjustment (Mode 1,3) 11 Gimbal Travel Limiter Covers 12 Rear Lever Tension Adjustment*
13 Mode Change Gimbal Centering Screw 14 Throttle/Aileron (Mode 1) Elevator/Aileron (Mode 2) Throttle/Rudder (Mode 3) Elevator/Rudder (Mode 4) Adjustment*
15 Up/Down Gimbal Stick Tension 16 Left/Right Gimbal Stick Tension Adjustment*
Function 17 Aileron Trim (Mode 1,2) Rudder Trim (Mode 3,4) 18 Elevator Trim (Mode 2, 4) Throttle Trim (Mode 1, 3) 19 Neck Strap Mount 20 Switch D2 21 Switch I 22 Switch D 23 Left Top Trim 24 Switch A 25 Switch B 26 Switch C 27 Up/down Gimbal Stick Tension 28 Left/Right Gimbal Stick Tension Adjustment*
Adjustment*
Elevator/Rudder (Mode 1) Throttle/Rudder (Mode 2) Elevator/Aileron (Mode 3) Throttle/Aileron (Mode 4) 29 1 41 43 44 42 20 21 22 23 24 25 26 11 27*
12 28*
29 13 11 30 31 32 3 5 9 10 11 12*
13 14 15*
16*
11 17 18 19 2
* Do not over loosen the gimbal tension adjustment screws. Over loosening may cause the screws to fall out. 33 34 35 36 37 4 6 7 8 3 Never charge batteries in extremely hot or cold places
(recommended between 5080 F or 1027 C) or place in direct sunlight Always disconnect the transmitter after charging, and let the charger cool between charges Always inspect a new battery before charging Always terminate all processes and contact Horizon Hobby if the product malfunctions Always keep batteries and charger away from any material that could be affected by heat (such as ceramic and tile), as they can get hot Always end the charging process if the charger or battery becomes hot to the touch or starts to change form (swell) during the charge process CAUTION: Never leave a charging battery unattended. CAUTION: Never change the low voltage limit for Li-Ion batteries below 3.3V. Doing so could over-discharge the battery and damage both battery and transmitter. CAUTION: Never charge the battery outside of the transmitter. Charging the battery outside of the transmitter may interfere with the battery monitoring system, which can give false low battery warnings. Charging Warnings Failure to exercise caution while using this product and comply with the following warnings could result in product malfunction, electrical issues, excessive heat, FIRE, and ultimately injury and property damage. Read all safety precautions and literature prior to use of this product Never allow minors to charge battery packs Never drop charger or batteries Never attempt to charge damaged batteries Never attempt to charge a battery pack containing different types of batteries Never charge a battery if the cable has been pinched or shorted Never allow batteries or battery packs to come into contact with moisture at any time Charging For optimum charging results, the built-in charger requires a USB power supply capable of at least 2-3A output. Using a power supply with a lower output will result in very long charge times or the transmitter not charging if it is powered on while attempting to charge. The fi rst time you charge the transmitter, the charge time may be 6-7 hours. Always charge the transmitter on a heat-
resistant surface. Charging:
1. Connect the power supply (not included) to an AC outlet. 2. Connect the Micro USB cable to the power supply and to the charge port on the transmitter as shown. 3. The LED will fl ash blue while charging. A fast press of the power switch will bring the Charge Battery icon to the color touch screen display. 4. Charging is complete when the blue fl ashing LED stops. Disconnect the USB cable once charging is complete and disconnect the power supply from the power outlet. 4 Powering On/Off the iX20 Transmitter The iX20 features a push button ON/OFF switch. 1. To power on the transmitter, push and hold the power button for several seconds until the blue LED fl ashes and the LCD screen displays the start up screen. The orange LED indicator lights immediately, indicating the transmitter is sending an RF signal. Similar to other smart devices, startup takes ~30seconds. Once startup is complete, the Spektrum Airware application will launch automatically, which requires another 15 seconds (approximately). 2. To power off the transmitter, push and hold the power button for several seconds until the Power Off / Reboot prompt shows on the screen. 3. Press Power Off to shutdown OR Restart to reboot the system. TIPS:
Press the power button once to put the display to sleep. The radio will continue to transmit normally while the screen is in sleep mode. Press the power button again to wake up the screen. Double pressing the power button will open a window allowing you to select RF On/Off, screen On/Off, WiFi On/Off, Bluetooth On/Off or Quick Sleep to put the system in sleep mode. It is recommended you use the sleep mode rather than powering the system off on fl ying days. The transmitter may be left in sleep mode for as long as 1-2 days safely. Power off the transmitter if you dont plan on using it within 2 days. Failing to power off the transmitter will result in continuous discharge of the battery. Home 1 2 3 4 Navigation The iX20 transmitter is built on the Android operating system and features a large color touch screen display. Navigate the iX20 using the same actions and gestures as those used to operate any other Android device. To navigate, use your fi nger to tap, swipe and drag icons and menus found on the display. Long Press for OK: When you see this icon, press and hold for approximately 2 seconds to accept the selection. Android Navigation The Spektrum AirWare application will hide the Android home screen navigation icons. To access the Android navigation icons at anytime, swipe up from the bottom edge of the screen. Press the circle icon to go to the Android home screen. 1. ALL APPS: Contains applications loaded onto the iX20. 2. BACK: Return to previous screen. 3. HOME: Return to the home screen. 4. OVERVIEW: Allows switching between and closing any of the running applications. Noti cation Screen 1. Swipe down from the top of the screen once to exit full screen mode and bring the home screen navigation icons to the front. 2. Swipe down a second time to roll down the Notifi cation Screen for quick access to:
Settings User Info Brightness Wi-Fi Bluetooth Landscape Location Cast Screen 5 Spektrum Airware Navigation The iX20 Spektrum AirWare app has up to four main screens that can be quickly accessed by swiping left or right on the touch screen display. The Dashboard and Monitor screens are always available. Telemetry Dashboard and Telemetry Min/
Max are only available when telemetry information is present. Dashboard: The main screen displaying Trims, and Timers as well the model name and image. Monitor: Graphical representation of all control inputs. Telemetry Dashboard*: Displays telemetry information for each sensor. User selects which items to display on this page from the Telemetry setup menu. Additional telemetry pages are available when activated in the telemetry setup menu. Telemetry Min/Max*: Logs the minimum and maximum values collected from each telemetry sensor.
*Only available if telemetry is active and the transmitter is bound to a telemetry receiver. Dashboard Monitor Telemetry Telemetry Min/Max The Dashboard and the other main screens contain common information and navigation options to access various functions of the iX20 transmitter. Long press to return to Dashboard from any other main screen Available battery capacity and voltage Telemetry Signal Strength Volume Active main screen:
Touch or sweep screen left or right to change Model Name: Touch for Model Utilities Menu OR long press to quickly access Direct Model Access to change the active model Spektrum Airware navigation buttons Volume Control Touch the Volume icon (
) in the top right corner of any of the main screens to access the iX20 Volume menu. Move the slider up and down to adjust the volume. Touch the Mute button (
) to silence all sounds within the Spektrum AirWare app. Telemetry Reset When the transmitter is bound to a telemetry receiver, telemetry signal strength bars appear in the main screen top bar (
). Long press the strength bars to reset the telemetry fl ight data and erase the min/max data. 6 Spektrum Airware Navigation Buttons The Spektrum Airware navigation buttons are available from any of the main screens:
My List Model Adjust To exit any of the above menus, press the back arrow (
the top left of the screen once to go back one menu or press and hold the back arrow to return directly to the dashboard. Model Setup System Settings
) on My List My List allows the user to create a list of shortcuts to quickly navigate to the most used functions. To create a shortcut list:
1. Touch the My List button on the main screen. 2. Touch the Confi gure button and select which functions to add to the My List. The functions will have a checkmark next to the name when selected. 3. Touch the Save button to save the list. The selected functions are now available in the My List screen. The My List button is confi gurable for each model and may be turned on or off from the Model Setup button, Menu Setup menu. Model Adjust The Model Adjust menu contains features and adjustments that are used to fi nalize the settings for a model confi guration. Options in the Model Adjust menu will vary depending on the model type selected during initial model confi guration and the aircraft type selected in the Model Setup menu. Some options include:
Servo Setup Dual Rates/ Expo Throttle Cut Throttle Curve Mixing Flap System Sequencer Model Setup The Model Setup menu options are used for basic aircraft setup confi guration. The menu list varies by model type. The Model Setup menu options include:
Frame Rate Range Test Aircraft Type Timers Telemetry Trainer Audio Events Trim Setup Flight Mode Setup Channel Assign Analog Switch Setup Digital Switch Setup Model Start Warnings Serial Port Setup Menu Setup Sleep Mode Bind Swash Type Sail Type Trim/Channel Confi g System Settings The System Settings menu options are used to make transmitter system adjustments and to access the manual. The System Settings menu options include:
Manual System Confi guration Product Information Regulatory Calibration 7 Creating A New Model 1. Create a new model by touching the pen icon (
) at the top left of the dashboard to access the Model Utilities screen. If RF is on, the system will open a dialog box to confi rm RF will be turned off to enter this menu. Touch and hold PROCEED to continue. 2. Press on the expand icon ( ) at the top right corner of the Model Utilities screen. 3. Select Add a New Model from the drop down menu. 4. Select Default. 5. Select the model type desired from Airplane, Helicopter, Sailplane or Multirotor. 6. Select Create. 7. The model is added to the Model Utilities list and is now the active model, indicated by an orange outline. 8. Touch and hold the back arrow (
dashboard.
) to return to the TIP: Select the new model in the Model Utilities list to go to the Model Details page for that model to access these features:
Change Model Name Change Model Image Monitor Channel Count Edit Model Type Reset Model Timer Duplicate Model Reset Model Delete Model Export Model Save As Template Model Note Binding Binding is the process of linking the iX20 transmitter to an aircraft receiver. The iX20 is compatible with genuine DSM2 and DSMX Spektrum receiver products. The EU version of the iX20 does not support DSM2 receiver products. Access the Bind menu from the Model Setup menu or access it directly by touching the BIND button on the Dashboard screen. Touch Alerts to confi gure any alerts which occur during binding. FCC and ISED Information The iX20 transmitter FCC and ISED regulatory information is available in the System Settings Menu. 1. Touch the System Settings button on any of the main screens. 2. Touch Regulatory to open. 8 1-Year Limited Warranty What this Warranty Covers Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product purchased (the Product) will be free from defects in materials and workmanship for a period of 1 years from the date of purchase. What is Not Covered This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modifi cation of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer, (vi) Product not compliant with applicable technical regulations, or (vii) use that violates any applicable laws, rules, or regulations. OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASERS INTENDED USE. Purchasers Remedy Horizons sole obligation and purchasers sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, (ii) repair, or (iii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service, service and/or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE, REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASERS SOLE AND EXCLUSIVE REMEDY. Limitation of Liability HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, fi nal assembly, modifi cation, use or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase. Law These terms are governed by Illinois law (without regard to confl ict of law principals). This warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice. WARRANTY SERVICES Questions, Assistance, and Services Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to 9 better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call the toll free telephone number referenced in the Warranty and Service Contact Information section to speak with a Product Support representative. Inspection or Services If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby.com/content/service-center_ render-service-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product to Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton. NOTICE: Do not ship lithium batteries to Horizon. If you have any issue with a lithium battery, please contact the appropriate Horizon Product Support offi ce. Warranty Requirements For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon. Non-Warranty Service Should your service not be covered by warranty, service will be completed and payment will be required without noti cation or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notifi cation. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashiers checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizons Terms and Conditions found on our website http://www.horizonhobby.com/content/
service-center_render-service-center. ATTENTION: Horizon service is limited to Product compliant in the country of use and ownership. If received, a non-compliant Product will not be serviced. Further, the sender will be responsible for arranging return shipment of the un-serviced Product, through a carrier of the senders choice and at the senders expense. Horizon will hold non-compliant Product for a period of 60 days from noti cation, after which it will be discarded without liability to Horizon. 10/15 Warranty and Service Contact Information Country of Purchase Horizon Hobby Phone Number/Email Address Horizon Service Center
(Repairs and Repair Requests) Horizon Product Support
(Product Technical Assistance) United States of America Sales EU Horizon Technischer Service Sales: Horizon Hobby GmbH servicecenter.horizonhobby.com/RequestForm/
productsupport@horizonhobby.com 877-504-0233 websales@horizonhobby.com 800-338-4639 service@horizonhobby.de
+49 (0) 4121 2655 100 Address 2904 Research Rd Champaign, Illinois, 61822 USA Hanskampring 9 D 22885 Barsbttel, Germany FCC Information Contains FCC ID: BRWPLANO1T FCC ID: BRWIX20 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifi cations not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This product contains a radio transmitter with wireless technology which has been tested and found to be compliant with the applicable regulations governing a radio transmitter in the 2.400GHz to 2.4835GHz frequency range. IC Information IC: 6157A-IX20 CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Horizon Hobby, LLC 2904 Research Rd., Champaign, IL 61822 Email: compliance@horizonhobby.com Web: HorizonHobby.com
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 10 Compliance Information for the European Union Instructions for disposal of WEEE by users in the European Union This product must not be disposed of with other waste. Instead, it is the users responsibility to dispose of their waste equipment by handing it over to a designated collections point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city offi ce, your household waste disposal service or where you purchased the product. EU Compliance Statement:
Horizon Hobby, LLC hereby declares that this product is in compliance with the essential requirements and other relevant provisions of the RED Directive. A copy of the EU Declaration of Conformity is available online at:
http://www.horizonhobby.com/content/support-render-compliance. 2.4 Control:
Frequency Band: 2402-2478MHz Max EIRP: 20 dBm 2.4 Trainer:
Frequency Band: 2404-2478MHz Max EIRP: 3 dBm 2.4 WiFi:
Frequency Band: 2412-2462MHz Max EIRP: 19.5 dBm 5GHz WiFi:
Frequency Band: 4900-5845MHz Max EIRP: 15.5 dBm Bluetooth:
Frequency Band: 2404-2480MHz Max EIRP: 10 dBm 11 HINWEIS Allen Anweisungen, Garantien und anderen zugehrigen Dokumenten sind nderungen nach Ermessen von Horizon Hobby, LLC vorbehalten. Aktuelle Produktliteratur fi nden Sie unter www.horizonhobby.com oder www.towerhobbies.com im Support-Abschnitt fr das Produkt. Begriffserklrung Die folgende Begriffe werden in der gesamte Produktliteratur verwendet, um die Gefhrdungsstufen im Umgang mit dem Produkt zu defi ieren:
WARNUNG: Verfahren knnen bei nicht ordnungsgemer Durchfhrung womglich Schden an Eigentum, Kollateralschden UND schwere Verletzungen ODER hchstwahrscheinlich oberfl chliche Verletzungen verursachen. ACHTUNG: Verfahren knnen bei nicht ordnungsgemer Durchfhrung womglich Schden an physischem Eigentum UND schwere Verletzungen verursachen. HINWEIS: Verfahren knnen bei nicht ordnungsgemer Durchfhrung womglich Schden an physischem Eigentum UND geringfgige oder keine Verletzungen verursachen. WARNUNG: Lesen Sie die GESAMTE Bedienungsanleitung, um sich vor Inbetriebnahme mit den Funktionen des Produkts vertraut zu machen. Eine nicht ordnungsgeme Bedienung des Produkts kann das Produkt und persnliches Eigentum schdigen und schwere Verletzungen verursachen. Dies ist ein hoch entwickeltes Produkt fr den Hobbygebrauch. Es muss mit Vorsicht und Umsicht bedient werden und erfordert einige mechanische Grundfertigkeiten. Wird das Produkt nicht sicher und umsichtig verwendet, so knnten Verletzungen oder Schden am Produkt oder anderem Eigentum entstehen. Dieses Produkt ist nicht fr den Gebrauch durch Kinder ohne direkte Aufsicht eines Erwachsenen vorgesehen. Versuchen Sie nicht, das Produkt ohne Zustimmung von Horizon Hobby, LLC zu zerlegen, mit nicht-kompatiblen Komponenten zu verwenden oder beliebig zu verbessern. Dieses Handbuch enthlt Sicherheitshinweise sowie Anleitungen zu Betrieb und Wartung. Es ist unerlsslich, dass Sie alle Anleitungen und Warnungen in diesem Handbuch vor dem Zusammenbau, der Einrichtung oder der Inbetriebnahme lesen und diese befolgen, um eine korrekte Bedienung zu gewhrleisten und Schden bzw. schwere Verletzungen zu vermeiden. Altersempfehlung: Nicht fr Kinder unter 14. Dies ist kein Spielzeug. HINWEIS: Das Gert ist nur zur Nutzung mit unbemannten, ferngesteuerten Hobbyfahrzeugen bzw. Hobbyfl uggerten vorgesehen. Horizon Hobby schliet jegliche Haftung im Falle von nicht dem Bestimmungszweck entsprechender Nutzung aus und wird im Zusammenhang auch keinen Kundendienst bereitstellen. GARANTIE-REGISTRIERUNG Gehen Sie noch heute auf www.spektrumrc.com/registration, um Ihr Produkt zu registrieren. Sicherheitsvorkehrungen Achten Sie stets darauf, dass alle Akkus ordnungsgem geladen sind, bevor Sie das Modell verwenden. Kontrollieren Sie stets vor Betrieb alle Servos und deren Verbindungen. Betreiben Sie Ihr Modell niemals in unmittelbarer Nhe von Zuschauer, auf Parkpltzen oder in anderen Bereichen in denen dies zu Verletzungen Dritter bzw. zu Sachschden fhren knnte. Betreiben Sie Ihr Modell niemals bei Unwetter bzw. unter ungnstigen Wetterbedingungen. Schlechte Sichtverhltnisse knnen zu Desorientierung und zum Verlust der Kontrolle ber Ihr Modell fhren. Richten Sie die Senderantenne niemals direkt auf das Modell. Die Funkstrahlung an der Antennenspitze ist von Natur aus gering. Wenn whrend des Modellbetriebs Sie etwaige Unstetigkeiten oder Anomalitten bemerken, stellen Sie den Betrieb sofort ein, bis die Ursache des Problems ermittelt und abgestellt wurde. 12 Spezi kationen 20 250 Kanle Modellspeicher Programmierungsoptionen Flugzeug/Hubschrauber/
Segelfl ugzeug/Multikopter DSM2/DSMX 2,4GHz Modulation Band Au sung Bildfrequenz Modi Akkutyp Ladegert-Netzteil (nicht im Lieferumfang enthalten) 2-3 A Mindestleistung 2048 11/22MS Frei whlbarer Modus 14 Lithium-Ionen 10.500mAh Funktion 29 Hhenruder/Seitenruder (Modus 1) Gas/Seitenruder (Modus 2) Hhenruder/Querruder (Modus 3) Gas/Querruder (Modus 4) Gastrimmung (Modus 2, 4) 30 Seitenrudertrimmung (Modus 1, 2) Querrudertrimmung (Modus 3, 4) 31 Gasriemenanpassung (Modus 2, 4) 32 Hhentrimmung (Modus 1, 3) 33 Hebel rechts hinten 34 Kameralinsen 35 Anschluss fr Micro-Speicherkarte 36 USB-Ladeanschluss 37 Akku-Abdeckung 38 Hebel links hinten 39 Anschluss serielle Schnittstelle 40 Audioanschluss 41 Linkstrimmung 42 Ein-/Ausschalter 43 LED 44 Rechtstrimmung 21 23 25 24 38 39 40 Senderfunktionen Funktion Funktion 1 Antenne 2 LCD-Touchscreen 3 Schalter E2 4 Rechter Knopf 5 Schalter E 6 Trimmer oben rechts 7 Schalter H 8 Schalter G 9 Schalter F 10 Gasriemenanpassung (Modus 1, 3) 11 Abdeckungen des Gimbal-
12 Spannungseinstellung hinterer 13 Modusnderung Gimbal-Zentrier-
Verfahrwegsbegrenzers Hebel*
schraube Gas/Querruder (Modus 1) Hhenruder/Querruder (Modus 2) Gas/Seitenruder (Modus 3) Hhenruder/Seitenruder (Modus 4) 14 Gimbalhebel*
Spannungseinstellung*
15 Auf/Ab-Spannungseinstellung fr 16 Links/Rechts Gimbalhebel-
17 Querrudertrimmung (Modus 1, 2) Seitenrudertrimmung (Modus 3, 4) 18 Hhentrimmung (Modus 2, 4) Gastrimmung (Modus 1, 3) 19 Umhngeriemenhalterung 20 Schalter D2 21 Schalter I 22 Schalter D 23 Trimmung oben links 24 Schalter A 25 Schalter B 26 Schalter C 27 Auf/Ab-Spannungseinstellung fr 28 Links/Rechts Gimbalhebel-
Gimbalhebel*
Spannungseinstellung*
1 41 43 44 42 20 21 22 23 24 25 26 11 27*
12 28*
29 13 11 30 31 32 4 6 7 8 3 5 9 10 11 12*
13 14 15*
16*
11 17 18 19 33 34 35 36 37 2
* Gimbalstellschrauben nicht bermig lockern. Die Schrauben knnen durch ein bermiges Lockern herausfallen. 13 Warnhinweise zur Ladung der Akkus Mangelnde Vorsicht bei der Benutzung dieses Produkts und Nichtbeachtung der nachstehenden Warnungen knnen zu Fehlfunktionen, Problemen mit der Elektrik, bermiger Erhitzung, BRNDEN und letztlich zu Verletzungen bzw. Sachschden fhren. Lesen Sie sich alle Informationen zu den Sicherheitsvorkehrungen sowie die gesamte Dokumentation vor der Nutzung dieses Produkts durch Erlauben Sie niemals Minderjhrigen die Akku-Packs aufzuladen Lassen Sie niemals das Ladegert bzw. die Akkus fallen Versuchen Sie niemals, beschdigte Batterien aufzuladen. Versuchen Sie niemals ein Akku-Pack zu laden, das aus verschiedenen Akku-Typen besteht Wechseln Sie niemals einen Akku, wenn das Kabel gequetscht oder kurzgeschlossen wurde Vermeiden Sie unbedingt jeden Kontakt der Akkus bzw. Akku-Packs mit Feuchtigkeit Wechseln Sie niemals Akkus an sehr heien oder sehr kalten Pltzen (empfohlen werden Temperaturen zwischen 1027C bzw. 5080F) noch an Orten mit direkter Sonneneinstrahlung Trennen Sie nach dem Laden stets den Sender vom Ladegert und lassen Sie das Ladegert zwischen den Ladevorgngen abkhlen berprfen Sie einen neuen Akku stets vor dem Laden Brechen Sie stets alle Vorgnge ab und wenden Sie sich an Horizon Hobby, wenn das Produkt Fehlfunktionen aufweist Halten Sie Akkus und Ladegert stets von allen Materialien fern, die durch Hitze beschdigt werden knnten (wie beispielsweise Keramik und Fliesen), da erstere sich erhitzen knnen Beenden Sie stets den Ladevorgang, wenn das Ladegert bzw. der Akku whrend des Ladevorgangs zu hei fr eine Berhrung wird oder anfngt, seine Form zu ndern (anschwellen) Laden Fr optimale Ladeergebnisse bentigt das integrierte Ladegert ein USB-Netzteil mit einer Mindestleistung von 2-3 A. Wird ein Netzteil mit geringerer Leistung verwendet, fhrt dies zu sehr langen Ladezeiten oder der Sender ldt nicht, wenn er whrend des Ladeversuchs eingeschaltet wird.Das erste Laden des Senders kann bis zu 67 Stunden dauern. Den Sender immer auf einer hitzebestndigen Oberfl che laden. Laden:
1. Das Netzteil (nicht im Lieferumfang enthalten) mit einer Gleichstromsteckdose verbinden. 2. Das Mikro-USB-Kabel wie abgebildet am Netzteil und am Ladeanschluss am Sender anschlieen. 3. Die LED wird whrend des Ladens blau blinken. Durch ein rasches Drcken der Ein-/Austaste wird das Symbol des Akkuladegerts auf dem Farb-Touchscreen anzeigen. 4. Das Laden ist abgeschlossen, wenn die blaue LED nicht mehr blinkt. Das USB-Kabel nach dem vollstndigen Laden trennen und das Netzteil aus der Steckdose ziehen. ACHTUNG: Einen Akku whrend des Ladens niemals unbeaufsichtigt lassen. ACHTUNG: Die Niederspannungsgrenze der Li-Ion-
Akkus nicht unter 3,3V ndern. Dadurch knnte der Akku bermig entladen werden und zu Schden an Akku und Sender fhren. ACHTUNG: Den Akku niemals auerhalb des Senders laden. Das Laden des Akkus auerhalb des Senders kann das Akku-berwachungssystem stren, das inkorrekte Warnungen fr einen niedrigen Akkustand ausgeben kann. 14 Ein-/Ausschalten des iX20-Senders Der iX20 verfgt ber einen Ein-/Aus-Druckschalter. 1. Zum Einschalten des Senders den Ein-/Ausschalter fr mehrere Sekunden gedrckt halten, bis die blaue LED blinkt und der LCD-
Bildschirm den Startbildschirm anzeigt. Die orangefarbene LED-
Anzeige leuchtet sofort auf, um das Senden eines HF-Signals durch den Sender anzuzeigen. Das Einschalten dauert hnlich wie bei anderen Smart-Gerten etwa 30Sekunden. Die Spektrum Airware-Anwendung wird nach dem Einschalten automatisch starten, was weitere (etwa) 15Sekunden in Anspruch nimmt. 2. Zum Ausschalten den Ein-/Ausschalter fr mehrere Sekunden gedrckt halten, bis das Dialogfenster zum Ausschalten/Neustart auf dem Bildschirm angezeigt wird. 3. Power Off [Ausschalten] zum Herunterfahren drcken ODER Restart [Neustart], um das System erneut zu starten. Navigation Der iX20-Sender wurde auf Grundlage des Android-
Betriebssystems entwickelt und besitzt eine groe farbige Touchscreen-Anzeige. Zur Navigation werden fr den iX20 die gleichen Vorgnge und Gesten verwendet, die auch fr den Betrieb anderer Android-Gerte genutzt werden. Zur Navigation die Finger verwenden, um auf der Anzeige zu fi ndende Symbole und Mens anzutippen, zu streichen und zu verschieben. Fr OK lange drcken: Wird dieses Symbol angezeigt, dieses fr ungefhr 2Sekunden gedrckt halten, um die Auswahl anzunehmen. Navigation mit Android Die Spektrum AirWare-Anwendung blendet die Navigationssymbole des Android-Startbildschirms aus. Durch Streichen vom unteren Rand des Bildschirms nach oben die Android-Navigationssymbole aufrufen. Auf das Kreissymbol drcken, um zum Android-Startbildschirm zu gelangen. 1. ALLE APPS: Enthlt die auf iX20 installierten Anwendungen. 2. ZURCK: Zurck zum vorherigen Bildschirm. 3. HOME: Zurck zum Startbildschirm. 4. BERBLICK: Ermglicht das Wechseln zwischen den und Schlieen der laufenden Anwendungen. Benachrichtigungs-Bildschirm 1. Von oben nach unten streichen, um den Vollbildmodus zu verlassen und die Navigationssymbole des Startbildschirms nach vorn zu bringen. TIPPS:
Die Ein-/Aus-Schaltfl che einmal drcken, um die Anzeige in den Ruhemodus zu schalten. Das Funksystem wird weiterhin normal senden, whrend sich der Bildschirm im Ruhemodus befi ndet. Um den Bildschirm zu aktivieren, einfach erneut auf die Ein-/Austaste drcken. Durch doppeltes Drcken des Ein-/Ausschalters wird ein Fenster geffnet, auf dem die Optionen RF On/
Off [HF ein/aus], Screen On/Off [Bildschirm ein/
aus], WiFi On/Off [WLAN ein/aus], Bluetooth On/Off
[Bluetooth ein/aus] oder Quick Sleep [Schnelles Schalten in den Ruhemodus] gewhlt werden knne, um das System in den Ruhemodus zu versetzen. Es wird empfohlen, dass an Flugtagen der Ruhemodus verwendet wird, anstatt das Gert auszuschalten. Der Sender kann bis zu 12Tage sicher im Ruhemodus gehalten werden. Den Sender ausschalten, wenn er nicht innerhalb von 2Tagen verwendet werden soll. Wird der Sender nicht ausgeschaltet, so kommt es zur Dauerentladung des Akkus. Home 1 2 3 4 2. Ein weiteres Mal nach unten streichen, um auf den Benachrichtigungsbildschirm nach unten mit Zugang zu folgendem zu erlangen:
Setting [Einstellungen]
User Info Bluetooth Landscape [Querformat]
Location [Standort]
Cast Screen [Bildschirm zum Projektieren]
[Nutzerinformationen]
Brightness [Helligkeit]
Wi-Fi [WLAN]
15 Spektrum Airware-Navigation Die iX20 Spektrum AirWare-Anwendung verfgt ber vier Hauptbildschirme, auf die durch Wischen nach links oder rechts auf der Touchscreen-Anzeige schnell zugegriffen werden kann. Die Dashboard- und Monitor-Bildschirme sind immer verfgbar. Das Telemetrie-Dashboard und Telemetrie Min/Max sind nur verfgbar, wenn Telemetrieinformationen verfgbar sind. Dashboard: Der Hauptbildschirm, auf dem Trimmungen und Timer sowie Modellname und dessen Bild angezeigt werden. Monitor: Grafi sche Aufbereitung aller Steuerdateneingaben. Telemetrie-Dashbord*: Zeigt Telemetrieinformationen fr jeden Sensor an. Anwender whlen im Telemetrie-
Setupmen die gewnschten Elemente zur Anzeige auf dieser Seite aus. Weitere Telemetrieseiten sind im aktivierten Telemetrie-Setupmen verfgbar. Telemetrie Min/Max*: Protokolliert die von jedem Telemetriesensor erfassten Mindest- und Hchstwerte. Dashboard Monitor Telemetrie Telemetrie Min/Max
*Nur verfgbar, wenn Telemetrie aktiviert ist und der Sender an einen Telemetrie-Empfnger gebunden ist. Das Dashboard und die anderen Hauptbildschirme enthalten allgemeine Informationen und Navigationsoptionen fr den Zugriff auf verschiedene Funktionen des iX20-Senders. Verfgbare Akkukapazitt und Spannung Durch langes Drcken erfolgt zu Rckkehr von jedem beliebigen Hauptbildschirm zum Dashboard Modellname: Auf das Men Model Utilities [Modell-
Dienstprogramme] tippen ODER langes Drcken, um zum ndern des aktiven Modells schnell auf Direct Model Access [Direkter Zugang zum Modell] zu gelangen Telemetriesignalstrke Lautstrke Aktiver Hauptbildschirm:
Zum Wechseln antippen oder Bildschirm nach links oder rechts wischen Spektrum AirWare-
Navigationsschaltfl chen Die Stumm-Schaltfl che (
), um alle Tne innerhalb der Spektrum AirWare-Anwendung auszuschalten. Lautstrkeregler Auf das Lautstrkesymbol (
) oben in der Ecke rechts auf einem beliebigen der Hauptbildschirme tippen, um auf das Lautstrke-Men des iX20 zuzugreifen. Den Schieber nach oben und unten bewegen, um die Lautstrke zu regulieren. Zurcksetzen der Telemetrie Ist der Sender an einen Telemetrie-Empfnger gebunden, so erscheinen Balken fr die Telemetriesignalstrke in der oberen Leiste des Hauptbildschirms (
der Signalstrke-Balken knnen die Telemetrie-Flugdaten zurcksetzt und die Daten fr Min/Max gelscht werden.
). Durch langes Drcken 16 System Settings
[Systemeinstellungen]
Spektrum AirWare-Navigationsschalt chen Die Spektrum AirWare-Navigationsschaltfl chen sind auf jedem der Hauptbildschirme verfgbar:
My List [Meine Liste]
Model Adjust [Modell anpassen]
Model Setup [Modell-Setup]
Zum Verlassen eines der vorstehend genannten Mens den Zurck-Pfeil (
) oben links auf dem Bildschirm einmal zum Verlassen drcken oder den Zurck-Pfeil drcken und halten, um direkt zum Dashboard zu gelangen. My List [Meine Liste]
Mit My List [Meine Liste] kann der Nutzer eine Liste mit Verknpfungen erstellen, um zu den am hufi gsten verwendeten Funktionen zu gelangen. Zum Erstellen einer Liste mit Verknpfungen:
1. Die Schaltfl che My List [Meine Liste] auf dem Hauptbildschirm tippen. 2. Die Schaltfl che Confi gure [Konfi gurieren] tippen und whlen, welche Funktion zu My List [Meine Liste]
hinzugefgt werden soll. Die Funktionen werden bei Auswahl ein Hkchen neben dem Namen aufweisen. 3. Zum Speichern der Liste die Schaltfl che Save
[Speichern] tippen. Die ausgewhlten Funktionen sind nun auf dem Bildschirm My List [Meine Liste]verfgbar. Die Schaltfl che My List [Meine Liste] kann fr jedes Modell konfi guriert werden und kann ber die Schaltfl che Model Setup [Modell-Setup] im Men Menu Setup [Men-Setup]
ein- oder ausgeschalten werden. Model Adjust [Modell anpassen]
Das Men Model Adjust [Modell anpassen] enthlt Funktionen und Anpassungen, die fr die Fertigstellung der Einstellungen fr eine Modell-Konfi guration verwendet werden. Die Optionen im Men Model Adjust [Modell anpassen] variieren je nach dem whrend des erstmaligen Modell-Setups ausgewhlten Modelltyp sowie entsprechend dem im Men Model Setup
[Modell-Setup] ausgewhlten Luftfahrzeugtyp. Einige Optionen umfassen:
Servo Setup [Servo-Setup]
Dual Rates/ Expo [Duale Throttle Curve [Gaskurve]
Mixing [Mischen]
Flap System [Klappensystem]
Sequencer [Sequenzer]
Geschwindigkeiten/
Exponential]
Throttle Cut [Gasabschaltung]
Model Setup [Modell-Setup]
Die Optionen im Men Model Setup [Modell-Setup] werden zur Konfi gurationen von einfachen Luftfahrzeug-Setups genutzt. Die Menliste variiert je nach Modelltyp. Die Menoptionen Model Setup [Modell-Setup] umfassen:
Frame Rate [Bildfrequenz]
Range Test [Reichweitentest]
Aircraft Type [Luftfahrzeugtyp]
Timers [Uhren]
Telemetry [Telemetrie]
Trainer Audio Events [Audiovorgnge]
Trim Setup Digital Switch Setup
[Digitalschalter-Setup]
Model Start Warnings
[Modellstartwarnungen]
Channel Assign [Kanal zuordnen]
Analog Switch Setup
[Analogschalter-Setup]
Serial Port Setup [Setup des
[Trimmungseinstellung]
Flight Mode Setup
[Flugmodus-Setup]
seriellen Anschlusses]
Menu Setup [Men-Setup]
Sleep Mode [Ruhemodus]
Bind [Binden]
Swash Type [Taumelscheibentyp]
Sail Type [Segeltyp]
Trim/Channel Confi g
[Trimmungs-/
Kanalkonfi guration]
17 System Settings [Systemeinstellungen]
Die Menoptionen System Settings [Systemeinstellungen]
werden zum Durchfhren von Systemanpassungen und zum Zugriff auf das Handbuch verwendet. Die Menoptionen System Settings [Systemeinstellungen]
umfassen:
System Confi guration
[Systemkonfi guration]
Product Information
[Produktinformation]
Calibration [Kalibrierung]
Manual [Handbuch]
Regulatory [Regulatorisch]
Erstellen eines neuen Modells 1. Ein neues Modell durch Tippen des Stiftsymbols (
) oben links im Dashboard erstellen, um auf den Bildschirm Model Utilities [Modell-Dienstprogramme] zuzugreifen. Ist HF eingeschaltet, so wird das System ein Dialogfenster ffnen, um die HF-Abschaltung zu besttigen, sodass auf dieses Men zugegriffen werden kann. PROCEED
[Fortfahren] tippen und halten, um fortzufahren. 2. Auf das Erweiterungssymbol ( ) in der oberen rechten Ecke des Bildschirms Model Utilities [Modell-
Dienstprogramme] drcken. 3. Add a New Model [Ein neues Modell hinzufgen] aus dem Dropdown-Men auswhlen. 4. Default [Standard] whlen. 5. Den gewnschten Modelltyp aus Airplane [Flugzeug], Helicopter [Hubschrauber], Sailplane [Segelfl ugzeug]
oder Multirotor [Multikopter] whlen. 6. Create [Erstellen] whlen. 7. Das Modell wird der Liste Model Utilities [Modell-
Dienstprogramme] hinzugefgt und wird durch eine orangefarbene Umrundung als aktives Modell angezeigt. 8. Den Zurck-Pfeil (
) tippen und halten, um zurck zum Dashboard zu gelangen. TIPP: Das neue Modell in der Liste Model Utilities [Model Utilities [Modell-Dienstprogramme] whlen, um zur Seite Model Details [Modellinformationen] fr dieses Modell zu gelangen, um folgende Funktionen aufzurufen:
Change Model Name
[Modellnamen ndern]
Change Model Image
[Modell duplizieren]
Duplicate Model
[Modellbild ndern]
Monitor Channel Count
[Monitorkanalanzahl]
Edit Model Type
[Modelltyp bearbeiten]
Reset Model Timer
[Modelltimer zurcksetzen]
Reset Model [Modell zurcksetzen]
Delete Model [Modell lschen]
Export Model [Modell exportieren]
Save As Template
[Als Vorlage speichern]
Model Note
[Anmerkung zum Modell]
Binden Bindung bezeichnet den Vorgang zum Verknpfen des iX20-
Senders mit einem Luftfahrzeugempfnger. Der iX20 ist mit originalen DSM2 und DSMX Spektrum-Empfngerprodukten kompatibel. Die EU-Version des iX20 untersttzt keine DSM2-
Empfngerprodukte. Der Zugang zum Men Bind [Binden] erfolgt ber das Men Model Setup [Modell-Setup] oder durch direktes Tippen der Schaltfl che BIND [Binden] auf dem Dashboard-Bildschirm. Auf Alerts [Alarme] tippen, um einen whrend des Bindens auftretenden Alarm zu konfi gurieren. 18 FCC- und ISED-Informationen Die FCC- und ISED-Regulatorisch informationen fr den iX20-
Sender fi nden Sie im Men Systemeinstellungen. 1. Tippen Sie in einem der Hauptbildschirme auf die Schaltfl che Systemeinstellungen. 2. Tippen Sie zum ffnen auf Regulatorisch. Garantie und Service Informationen Warnung Ein ferngesteuertes Modell ist kein Spielzeug. Es kann, wenn es falsch eingesetzt wird, zu erheblichen Verletzungen bei Lebewesen und Beschdigungen an Sachgtern fhren. Betreiben Sie Ihr RC-Modell nur auf freien Pltzen und beachten Sie alle Hinweise der Bedienungsanleitung des Modells wie auch der Fernsteuerung. Garantiezeitraum Exklusive Garantie Horizon Hobby LLC (Horizon) garantiert, dass das gekaufte Produkt frei von Material- und Montagefehlern ist. Der Garantiezeitraum entspricht den gesetzlichen Bestimmung des Landes, in dem das Produkt erworben wurde. In Deutschland betrgt der Garantiezeitraum 6 Monate und der Gewhrleistungszeitraum 18 Monate nach dem Garantiezeitraum. Einschrnkungen der Garantie
(a) Die Garantie wird nur dem Erstkufer (Kufer) gewhrt und kann nicht bertragen werden. Der Anspruch des Kufers besteht in der Reparatur oder dem Tausch im Rahmen dieser Garantie. Die Garantie erstreckt sich ausschlielich auf Produkte, die bei einem autorisierten Horizon Hndler erworben wurden. Verkufe an dritte werden von dieser Garantie nicht gedeckt. Garantieansprche werden nur angenommen, wenn ein gltiger Kaufnachweis erbracht wird. Horizon behlt sich das Recht vor, diese Garantiebestimmungen ohne Ankndigung zu ndern oder modifi zieren und widerruft dann bestehende Garantiebestimmungen.
(b) Horizon bernimmt keine Garantie fr die Verkaufbarkeit des Produktes, die Fhigkeiten und die Fitness des Verbrauchers fr einen bestimmten Einsatzzweck des Produktes. Der Kufer allein ist dafr verantwortlich, zu prfen, ob das Produkt seinen Fhigkeiten und dem vorgesehenen Einsatzzweck entspricht.
(c) Ansprche des Kufers Es liegt ausschlielich im Ermessen von Horizon, ob das Produkt, bei dem ein Garantiefall festgestellt wurde, repariert oder ausgetauscht wird. Dies sind die exklusiven Ansprche des Kufers, wenn ein Defekt festgestellt wird. 19 Horizon behlt sich vor, alle eingesetzten Komponenten zu prfen, die in den Garantiefall einbezogen werden knnen. Die Entscheidung zur Reparatur oder zum Austausch liegt nur bei Horizon. Die Garantie schliet kosmetische Defekte oder Defekte, hervorgerufen durch hhere Gewalt, falsche Behandlung des Produktes, falscher Einsatz des Produktes, kommerziellen Einsatz oder Modifi kationen irgendwelcher Art aus. Die Garantie schliet Schden, die durch falschen Einbau, falsche Handhabung, Unflle, Betrieb, Service oder Reparaturversuche, die nicht von Horizon ausgefhrt wurden aus. Rcksendungen durch den Kufer direkt an Horizon oder eine seiner Landesvertretung bedrfen der Schriftform. Schadensbeschrnkung Horizon ist nicht fr direkte oder indirekte Folgeschden, Einkommensausflle oder kommerzielle Verluste, die in irgendeinem Zusammenhang mit dem Produkt stehen verantwortlich, unabhngig ab ein Anspruch im Zusammenhang mit einem Vertrag, der Garantie oder der Gewhrleistung erhoben werden. Horizon wird darber hinaus keine Ansprche aus einem Garantiefall akzeptieren, die ber den individuellen Wert des Produktes hinaus gehen. Horizon hat keinen Einfl uss auf den Einbau, die Verwendung oder die Wartung des Produktes oder etwaiger Produktkombinationen, die vom Kufer gewhlt werden. Horizon bernimmt keine Garantie und akzeptiert keine Ansprche fr in der folge auftretende Verletzungen oder Beschdigungen. Mit der Verwendung und dem Einbau des Produktes akzeptiert der Kufer alle aufgefhrten Garantiebestimmungen ohne Einschrnkungen und Vorbehalte. Wenn Sie als Kufer nicht bereit sind, diese Bestimmungen im Zusammenhang mit der Benutzung des Produktes zu akzeptieren, werden Sie gebeten, dass Produkt in unbenutztem Zustand in der Originalverpackung vollstndig bei dem Verkufer zurckzugeben. Sicherheitshinweise Dieses ist ein hochwertiges Hobby Produkt und kein Spielzeug. Es muss mit Vorsicht und Umsicht eingesetzt werden und erfordert einige mechanische wie auch mentale Fhigkeiten. Ein Versagen, das Produkt sicher und umsichtig zu betreiben kann zu Verletzungen von Lebewesen und Sachbeschdigungen erheblichen Ausmaes fhren. Dieses Produkt ist nicht fr den Gebrauch durch Kinder ohne die Aufsicht eines Erziehungsberechtigten vorgesehen. Die Anleitung enthlt Sicherheitshinweise und Vorschriften sowie Hinweise fr die Wartung und den Betrieb des Produktes. Es ist unabdingbar, diese Hinweise vor der ersten Inbetriebnahme zu lesen und zu verstehen. Nur so kann der falsche Umgang verhindert und Unflle mit Verletzungen und Beschdigungen vermieden werden. Fragen, Hilfe und Reparaturen Ihr lokaler Fachhndler und die Verkaufstelle knnen eine Garantiebeurteilung ohne Rcksprache mit Horizon nicht durchfhren. Dies gilt auch fr Garantiereparaturen. Deshalb kontaktieren Sie in einem solchen Fall den Hndler, der sich mit Horizon kurz schlieen wird, um eine sachgerechte Entscheidung zu fllen, die Ihnen schnellst mglich hilft. Wartung und Reparatur Muss Ihr Produkt gewartet oder repariert werden, wenden Sie sich entweder an Ihren Fachhndler oder direkt an Horizon. Rcksendungen/Reparaturen werden nur mit einer von Horizon vergebenen RMA Nummer bearbeitet. Diese Nummer erhalten Sie oder ihr Fachhndler vom technischen Service. Mehr Informationen dazu erhalten Sie im Serviceportal unter www. Horizonhobby.de oder telefonisch bei dem technischen Service von Horizon. Packen Sie das Produkt sorgfltig ein. Beachten Sie, dass der Originalkarton in der Regel nicht ausreicht, um beim Versand nicht beschdigt zu werden. Verwenden Sie einen Paketdienstleister mit einer Tracking Funktion und Versicherung, da Horizon bis zur Annahme keine Verantwortung fr den Versand Garantie und Service Kontaktinformationen Land des Kauf Horizon Hobby des Produktes bernimmt. Bitte legen Sie dem Produkt einen Kaufbeleg bei, sowie eine ausfhrliche Fehlerbeschreibung und eine Liste aller eingesendeten Einzelkomponenten. Weiterhin bentigen wir die vollstndige Adresse, eine Telefonnummer fr Rckfragen, sowie eine Email Adresse. Garantie und Reparaturen Garantieanfragen werden nur bearbeitet, wenn ein Originalkaufbeleg von einem autorisierten Fachhndler beiliegt, aus dem der Kufer und das Kaufdatum hervorgeht. Sollte sich ein Garantiefall besttigen wird das Produkt repariert oder ersetzt. Diese Entscheidung obliegt einzig Horizon Hobby. Kostenp ichtige Reparaturen Liegt eine kostenpfl ichtige Reparatur vor, erstellen wir einen Kostenvoranschlag, den wir Ihrem Hndler bermitteln. Die Reparatur wird erst vorgenommen, wenn wir die Freigabe des Hndlers erhalten. Der Preis fr die Reparatur ist bei Ihrem Hndler zu entrichten. Bei kostenpfl ichtigen Reparaturen werden mindestens 30 Minuten Werkstattzeit und die Rckversandkosten in Rechnung gestellt. Sollten wir nach 90 Tagen keine Einverstndniserklrung zur Reparatur vorliegen haben, behalten wir uns vor, das Produkt zu vernichten oder anderweitig zu verwerten. ACHTUNG: Kostenp ichtige Reparaturen nehmen wir nur fr Elektronik und Motoren vor. Mechanische Reparaturen, besonders bei Hubschraubern und RC-
Cars sind extrem aufwendig und mssen deshalb vom Kufer selbst vorgenommen werden. 10/2015 Adresse Telefon/E-mail Adresse Europische Union Horizon Technischer Service Sales: Horizon Hobby GmbH service@horizonhobby.eu
+49 (0) 4121 2655 100 Hanskampring 9 D 22885 Barsbttel, Germany Rechtliche Informationen fr die Europische Union Anweisungen zur Entsorgung von Elektro-und Elektronik-
Altgerten fr Benutzer in der Europischen Union Dieses Produkt darf nicht zusammen mit anderem Abfall entsorgt werden. Stattdessen ist der Benutzer dafr verantwortlich, unbrauchbare Gerte durch Abgabe bei einer speziellen Sammelstelle fr das Recycling von unbrauchbaren elektrischen und elektronischen Gerten zu entsorgen. Die separate Sammlung und das Recycling von unbrauchbaren Gerten zum Zeitpunkt der Entsorgung hilft, natrliche Ressourcen zu bewahren und sicherzustellen, dass Gerte auf eine Weise wiederverwertet werden, bei der die menschliche Gesundheit und die Umwelt geschtzt werden. Weitere Informationen dazu, wo Sie unbrauchbare Gerte zum Recycling abgeben knnen, erhalten Sie bei lokalen mtern, bei der Mllabfuhr fr Haushaltsmll sowie dort, wo Siedas Produkt gekauft haben. EU Konformittserklrung:
SPM iX20 20-Channel 2.4GHz DSMX Aircraft System (SPMR20100) Horizon LLC erklrt hiermit, dass dieses Produkt konform zu den essentiellen Anforderungen der RED Direktive. Eine Kopie der Konformittserklrung ist online unter folgender Adresse verfgbar :
http://www.horizonhobby.com/content/support-render-compliance. 2.4 Control:
Frequency Band: 2402-2478MHz Max EIRP: 20 dBm 2.4 Trainer:
Frequency Band: 2404-2478MHz Max EIRP: 3 dBm 2.4 WiFi:
Frequency Band: 2412-2462MHz Max EIRP: 19.5 dBm 5GHz WiFi:
Frequency Band: 4900-5845MHz Max EIRP: 15.5 dBm Bluetooth:
Frequency Band: 2404-2480MHz Max EIRP: 10 dBm 20 REMARQUE Toutes les instructions, garanties et autres documents de garantie sont sujets la seule discrtion de Horizon Hobby, LLC. Veuillez, pour une littrature produits bien jour, visiter www.horizonhobby.com ou www.towerhobbies.com et cliquer sur longlet de support de ce produit. Signi cation de certains mots :
Les termes suivants servent, dans toute la documentation des produits, dsigner diffrents niveaux de blessures potentielles lors de lutilisation de ce produit :
AVERTISSEMENT: Procdures qui, si elles ne sont pas correctement suivies, peuvent entraner des dgts matriels, dommages collatraux et des blessures graves ventuellement un dcs OU crer un risque lev de blessure superfi cielle. ATTENTION: Procdures qui, si elles ne sont pas correctement suivies, peuvent entraner des dgts matriels ET ventuellement des blessures graves. REMARQUE: Procdures qui, si elles ne sont pas correctement suivies, peuvent ventuellement entraner des dgts matriels ET crent un trs faible risque de blessure. AVERTISSEMENT : Lisez la TOTALITE du manuel dutilisation afi n de vous familiariser avec les caractristiques du produit avant de le faire fonctionner. Une utilisation incorrecte du produit peut avoir comme rsultat un endommagement du produit lui-mme, des dgts matriels voire entraner des blessures graves. Ceci est un produit de loisirs perfectionn. Il doit tre manipul avec prudence et bon sens et requiert quelques aptitudes de base la mcanique. Lincapacit manipuler ce produit de manire sre et responsable peut provoquer des blessures ou des dommages au produit ou dautres biens. Ce produit nest pas destin tre utilis par des enfants sans la supervision directe dun adulte. Nessayez pas de modifi er ou dutiliser ce produit avec des composants incompatibles hors des instructions fournies par Horizon Hobby, LLC. Ce manuel comporte des instructions de scurit, de mise en uvre et dentretien. Il est capital de lire et de respecter toutes les instructions et avertissements du manuel avant lassemblage, le rglage ou lutilisation afi n de le manipuler correctement et dviter les dommages ou les blessures graves. ge minimum requis : Pas avant 14 ans. Ce produit nest pas un jouet. REMARQUE: Ce produit est destin uniquement tre utilis avec un avion et des vhicules tlcommands, sans conducteur de type Hoppy. Horizon Hobby dcline toute responsabilit en cas dune utilisation contraire la fonction laquelle il est destin et ne fournira aucun service de garantie sy rapportant. Mesures de scurit Veillez ce que toutes les batteries soient toujours correctement charges avant dutiliser le modle. Pensez toujours vrifi er tous les servos et leurs branchements avant chaque utilisation. Ne faites jamais fonctionner votre modle proximit de spectateurs, de parkings ou de toutes autres zones o des dommages corporels ou matriels pourraient tre provoqus. Ne faites jamais fonctionner votre modle par mauvais temps. Une mauvaise visibilit peut entraner une dsorientation et une perte de contrle de votre modle. Ne pointez jamais lantenne du transmetteur directement en direction du modle. Le diagramme de rayonnement depuis le bout de lantenne est intrinsquement faible. Si tout moment au cours de lutilisation de votre modle, vous observez un fonctionnement imprvisible ou anormal, mettez immdiatement le modle hors tension jusqu ce que la cause du problme ait t tablie et corrige. 21 20 250 Caractristiques Canaux Mmoire du modle Options de programmation Modulation Bande Rsolution DSM2/DSMX 2,4GHz 2048 Avion/Hlicoptre/Planeur/Multirotor Taux de rafrachissement Modes Type de la batterie Chargeur de lalimentation lectrique
(non inclus) 11/22Ms Mode slectionner par lutilisateur (1--4) Lithium Ion 10500mAh Sortie minimale 2 3 A Fonctions du transmetteur Fonction Fonction 1 Antenne 2 cran tactile LCD 3 InterrupteurE2 4 Bouton de droite 5 InterrupteurE 6 Trim suprieur droit 7 Interrupteur H 8 Interrupteur G 9 Interrupteur F 10 Ajustement de la courroie des gaz 11 C aches du limiteur de course de 12 A justement de la tension du levier 13 M odifi cation du mode, Vis de
(Mode 1,3) la nacelle gauche*
centrage de la nacelle 14 Gaz/Aileron (Mode 1) G ouverne de profondeur/Aileron (Mode 2) Gaz/Gouverne (Mode 3) lvateur/Gouvernail (Mode 4) 15 A justement de la tension du levier de la nacelle haut/bas*
1 41 43 44 42 20 21 22 23 24 25 26 11 27*
12 28*
29 13 11 30 31 32 18 16 A justement de la tension du levier 17 Trim daileron (Mode 1,2) de la nacelle gauche/droite*
Trim de gouvernail (Mode 3,4) T rim de gouverne de profondeur (Mode 2, 4) Trim des gaz (Mode 1, 3) 19 Support de lanire de cou 20 InterrupteurD2 21 InterrupteurI 22 InterrupteurD 23 Trim suprieur gauche 24 InterrupteurA 25 InterrupteurB 26 InterrupteurC 27 A justement de la tension du levier 28 A justement de la tension du levier de la nacelle haut/bas*
de la nacelle gauche/droite*
Fonction 29 G ouverne de profondeur/
Gouverne de direction (Mode 1) Gaz/Gouverne de direction (Mode 2) G ouverne de profondeur/Aileron (Mode 3) Gaz/Aileron (Mode 4)
(Mode 2,4) Trim des gaz (Mode 2,4) Trim daileron (Mode 3,4) 30 Trim de gouvernail (Mode 1,2) 31 Ajustement de la courroie des gaz 32 Trim dlvateur (Mode 1,3) 33 Levier arrire droit 34 Lentille de la camra 35 Port de la micro carte mmoire 36 Port de charge USB 37 Cache de batterie 38 Levier arrire gauche 39 Port dinterface srie 40 Prise audio 41 Trim de gauche 42 Bouton dalimentation 43 DEL 44 Trim droit 4 6 7 8 3 5 9 10 11 12*
13 14 15*
16*
11 17 18 19 33 34 35 36 37 21 23 25 24 38 39 40
* Ne desserrez pas trop les vis de rglage de la tension de la nacelle. Un desserrage peut entraner la chute des vis. 2 22 Ne chargez jamais les batteries dans des endroits extrmement chauds ou froids (la temprature recommande se situe entre 50 et 80F ou 10 et 27C) et ne les exposez pas la lumire directe du soleil Dbranchez toujours le transmetteur aprs quil soit charg et laissez le chargeur refroidir entre les charges Avant de charger une nouvelle batterie, inspectez-la Interrompez tous les processus et contactez Horizon Hobby si le produit fonctionne mal Maintenez toujours lcart les batteries et le chargeur de tout matriel qui pourrait tre affect par la chaleur (comme la cramique et les tuiles) car ils pourraient chauffer Stoppez le processus de chargement si le chargeur ou la batterie devient chaud au toucher ou commence se dformer (gonfl ement) ATTENTION: Ne laissez jamais une batterie en cours de charge sans surveillance. ATTENTION: Ne dfi nissez jamais la basse tension des batteries Li-Ion sur une limite infrieure 3,3V. Cela risquerait de provoquer une dcharge excessive de la batterie et dendommager la batterie et le transmetteur. ATTENTION: Ne chargez jamais la batterie en dehors du transmetteur. En effet, cela risquerait dinterfrer avec le systme de surveillance de la batterie et de fausser les indicateurs de charge. Avertissements relatifs au chargement Le manque de prudence lors de lutilisation de ce produit et le dfaut de se conformer aux avertissements suivants peut entraner un dysfonctionnement du produit, des problmes lectriques, une chaleur excessive, un incendie et, pour fi nir, des dommages corporels et matriels. Lisez toutes les mesures de scurit et la documentation avant dutiliser ce produit. Ne laissez pas les personnes mineures charger les packs de batteries Ne faites pas tomber le chargeur ou les batteries Ne tentez jamais de charger des batteries endommages Ne tentez jamais de charger un pack de batteries contenant diffrents types de batteries Ne chargez jamais une batterie si le cble est pinc ou coinc Les batteries ne doivent jamais entrer en contact avec lhumidit Chargement Pour des rsultats de charge optimaux, le chargeur intgr ncessite une sortie dalimentation lectrique USB de 2 3 A minimum. Utiliser une alimentation lectrique avec une sortie moins leve engendrera des temps de charge trs longs ou lmetteur ne se chargera pas sil est allum pendant la tentative de charge. Lorsque vous chargez le transmetteur pour la premire fois, le chargement peut prendre de 6 7heures. Veillez toujours charger lmetteur sur une surface rsistante la chaleur. Chargement:
1. Branchez lalimentation lectrique (non incluse) une prise de courant alternatif. 2. Branchez le cble micro USB lalimentation lectrique et au port de charge du transmetteur, comme illustr. 3. La DEL clignote en bleu pendant la charge. Si vous appuyez rapidement sur le bouton dalimentation, licne de charge de la batterie saffi che sur lcran tactile couleur. 4. La charge est termine lorsque la DEL sarrte de clignoter en bleu. Dbranchez le cble USB une fois la charge termine et dbranchez lalimentation de la prise. 23 Mise sous tension/hors tension du transmetteur iX20 ASTUCES:
Le transmetteur iX20 est dot dun commutateur marche/arrt. Appuyez une fois sur le bouton dalimentation pour mettre 1. Pour mettre le transmetteur sous lcran en veille. Laffi chage se met en veille mais la radio continue de diffuser normalement. Appuyez nouveau sur le bouton dalimentation pour affi cher lcran. Lorsque vous appuyez deux fois sur le bouton dalimentation, une fentre souvre et vous permet de slectionner RF On/Off (RF activ/
dsactiv), screen On/Off (cran activ/dsactiv), WiFi On/Off (Wi-fi activ/dsactiv), Bluetooth On/Off
(Bluetooth activ/dsactiv) ou Quick Sleep (veille rapide) pour mettre le systme en mode veille. Durant les jours de pilotage, il est recommand dutiliser le mode veille plutt que de mettre le systme hors tension. Le transmetteur peut tre laiss en mode veille pendant 1 2 jours en toute scurit. Mettez le transmetteur hors tension si vous ne prvoyez pas de lutiliser dans les 2jours. Le non-respect de cette consigne entrane une dcharge continue de la batterie. Home (Accueil) 1 2 3 4 tension, appuyez sur le bouton dalimentation et maintenez-
le enfonc pendant plusieurs secondes jusqu ce que la DEL clignote et que lcran LCD affi che lcran de dmarrage. Lindicateur DEL orange sallume immdiatement pour indiquer que le transmetteur envoie un signal RF. Comme pour dautres appareils intelligents, le dmarrage prend environ 30secondes. Une fois le dmarrage effectu, lapplication Spektrum Airware se lancera automatiquement, ncessitant ainsi 15secondes supplmentaires (environ). 2. Pour mettre le transmetteur hors tension, appuyez sur le bouton dalimentation et maintenez-le enfonc pendant plusieurs secondes jusqu ce que linvite de mise sous tension/redmarrage saffi che sur lcran. 3. Appuyez sur le bouton de mise hors tension pour arrter OU sur le bouton de redmarrage pour redmarrer le systme. Navigation Lmetteur iX20 a t conu pour fonctionner sous le systme dexploitation Android et est quip dun grand cran tactile couleur. Naviguez dans liX20 avec les mmes actions et les mmes gestes que pour tout autre appareil Android. Pour naviguer, utilisez votre doigt pour tapoter, balayer et faire glisser les icnes et les menus disponibles sur lcran. Appuyez longuement sur OK: Lorsque vous voyez cette icne, appuyez dessus et maintenez-la enfonce pendant environ 2secondes pour accepter la slection. Navigation Android Lapplication Spektrum AirWare masque les icnes de navigation de lcran daccueil Android. Pour accder aux icnes de navigation Android tout moment, balayez vers le haut depuis le bord de lcran. Appuyez sur licne cercle pour vous rendre sur lcran daccueil Android. 1. ALL APPS (TOUTES LES APPLICATIONS): Contient les applications charges dans le transmetteur iX20. 2. BACK (RETOUR): Permet de revenir lcran prcdent. 3. HOME (ACCUEIL): Permet de revenir lcran daccueil. 4. OVERVIEW (APERU): Permet de permuter entre les applications et de les fermer. cran de noti cation 1. Balayez une fois du haut vers le bas de lcran pour quitter le mode plein cran et affi cher les icnes de navigation de lcran daccueil au premier plan. 2. Balayez une deuxime fois vers le bas pour drouler lcran de notifi cation et accder rapidement ce qui suit:
Settings (Paramtres) User Info (Infos utilisateur) Luminosit Wi-Fi Bluetooth Landscape (Paysage) Location (Emplacement) Cast Screen (cran Cast) 24 Navigation dans Spektrum AirWare Lapplication Spektrum AirWare de liX20 a jusqu quatre crans principaux faciles daccs en balayant gauche ou droite sur lcran tactile. Les crans Dashboard (Tableau de bord) et Monitor (Moniteur) sont toujours disponibles. Telemetry Dashboard (Tableau de bord de tlmtrie) et Telemetry Min/
Max (Tlmtrie min/max) sont uniquement disponibles lorsque des informations relatives la tlmtrie sont prsentes. Dashboard (Tableau de bord): cran principal affi chant les trims et les minuteries, ainsi que le nom du modle et limage. Monitor (Moniteur): Reprsentation graphique de toutes les entres de commande. Telemetry Dashboard (Tableau de bord de tlmtrie)*:
Affi che les informations relatives la tlmtrie pour chaque capteur. Lutilisateur slectionne les lments quil souhaite affi cher sur cette page partir du menu de confi guration de tlmtrie. Des pages supplmentaires relatives la tlmtrie sont disponibles lorsquelles sont actives dans le menu de confi guration de tlmtrie. Telemetry Min/Max (Tlmtrie min/max)*: Enregistre les valeurs minimales et maximales issues de chaque capteur tlmtrique.
*Uniquement disponible si la tlmtrie est active et que le transmetteur est li un rcepteur de tlmtrie. Tableau de bord Moniteur Tlmtrie Tlmtrie min/max Le Tableau de bord et les autres crans principaux contiennent les informations courantes et les options de navigation pour accder diffrentes fonctions sur lmetteur iX20. Appuyez longtemps pour revenir au tableau de bord partir de nimporte quel autre cran principal. Capacit de batterie disponible et tension Model Name (Nom du modle):
Touchez pour ouvrir le menu Model Utilities (quipements du modle) OU appuyez longtemps pour accder rapidement Direct Model Access (Accs modle direct) et modifi er le modle actif Dintensit du Signal de Tlmtrie Volume cran principal actif:
Touchez ou balayez lcran gauche ou droite pour changer Boutons de navigation Spektrum Airware Contrle du volume Appuyez sur licne du volume (
) dans le coin suprieur droit de lun des crans principaux pour accder au menu de volume de liX20. Dplacez le curseur vers le haut ou le bas pour rgler le volume. Touchez le bouton Mute (Sourdine) (
) pour mettre en sourdine tous les sons de lapplication Spektrum AirWare. Rinitialisation de la tlmtrie Lorsque le transmetteur est li un rcepteur de tlmtrie, les barres dintensit du signal apparaissent dans la barre suprieure de lcran principal (
). Appuyez longtemps sur les barres dintensit pour rinitialiser les donnes de vol de tlmtrie et effacer les donnes min/max. 25 Boutons de navigation Spektrum Airware Les boutons de navigation Spektrum Airware sont accessibles depuis nimporte quel cran principal:
My List (Ma liste) Ajustement du modle Pour quitter lun des menus ci-dessus, appuyez une fois sur la fl che de retour (
) en haut gauche de lcran pour revenir un menu, ou enfoncez et maintenez la fl che de retour pour revenir directement au tableau de bord. Confi guration du modle Paramtres systme My List (Ma liste) My List (Ma liste) permet lutilisateur de crer une liste de raccourcis et ainsi daccder rapidement aux fonctions les plus utilises. Pour crer une liste de raccourcis:
1. Touchez le bouton My List (Ma liste) sur lcran principal. 2. Touchez le bouton Confi gure (Confi guration) et slectionnez les fonctions ajouter My List (Ma liste). Une coche ct du nom des fonctions signifi e quelles sont slectionnes. 3. Touchez le bouton Save (Enregistrer) pour enregistrer la liste. Les fonctions slectionnes sont dsormais disponibles dans lcran My List (Ma liste). Le bouton My List (Ma liste) est confi gurable pour chaque modle et peut tre activ ou dsactiv en appuyant sur le bouton Model Setup (Confi guration du modle) ou partir du menu Menu Setup (Confi guration du menu). Ajustement du modle Le menu Model Adjust (Ajustement du modle) contient des fonctionnalits et des ajustements utiliss pour fi naliser les rglages dune confi guration de modle. Les options du menu Model Adjust (Ajustement du modle) varient selon le type de modle slectionn lors de la confi guration initiale du modle et le type daronef slectionn dans le menu Model Setup
(Confi guration du modle). Ces options incluent notamment ce qui suit:
Confi guration du servo Double dbattement/Expo Throttle Cut (Arrt du Courbe dacclration Mixage Circuit des volets Squenceur moteur) Con guration du modle Les options du menu Model Setup (Confi guration du modle) sont utilises pour la confi guration basique de lappareil. La liste du menu varie selon le type de modle. Les options du menu Model Setup (Confi guration du modle) comprennent:
Taux de rafrachissement Test de porte Type daronef Minuteur Tlmtrie colage vnements audio Confi guration du trim Confi guration du mode de vol Channel Assign (Attribution Mode veille Affectation Swash Type (Type de Menu Setup (Confi guration Confi guration des ports dmarrage du modle Avertissements du plateau cyclique) du menu) de srie des canaux) Confi guration des Sail Type (Type de planeur) Trim/Channel Confi g commutateurs analogiques
(Confi guration des trims/canaux) Confi guration des commutateurs numriques 26 Paramtres systme Les options du menu Paramtres systme servent effectuer les ajustements du transmetteur et accder au manuel. Les options du menu Paramtres systme comprennent:
Confi guration du systme Informations produit talonnage Manuel Rglementaire Cration dun modle 1. Crez un modle en appuyant sur licne crayon (
) en haut gauche du tableau de bord et accdez lcran quipements du modle. Si RF est activ, le systme ouvre une bote de dialogue pour confi rmer la mise hors tension de RF pour accder ce menu. Touchez et maintenez PROCEED (Continuer) pour continuer. 2. Appuyez sur licne de dploiement ( ) dans le coin suprieur droit de lcran quipements du modle. 3. Slectionnez Add a New Model (Ajouter un nouveau modle) dans le menu droulant. 4. Slectionnez Default (Dfaut). 5. Slectionnez le type de modle souhait parmi Avion, Hlicoptre, Planeur ou Multirotor. 6. Slectionnez Create (Crer). 7. Le modle est ajout la liste Model Utilities
(quipements du modle) et est dsormais le modle actif, indiqu par un contour orange. 8. Touchez et maintenez la fl che de retour (
revenir au tableau de bord.
) pour CONSEIL: Slectionnez le nouveau modle dans la liste Model Utilities (quipements du modle) pour accder la page Model Details (Dtails du modle) et accder ces fonctions:
Changer le nom du modle Changer limage du modle Nombre de canaux du moniteur Modifi er le type de modle Rinitialiser le minuteur du Copier le modle Rinitialiser le modle Supprimer le modle Exporter le modle Enregistrer comme modle type Note sur le modle modle Affectation Laffectation est le processus consistant lier le transmetteur iX20 un rcepteur daronef. LiX20 est compatible avec les rcepteurs Spektrum DSM2 et DSMX authentiques. La version europenne de liX20 nest pas compatible avec les rcepteurs DSM2. Accdez au menu Bind (Affectation) partir du menu Model Setup (Confi guration du modle) ou directement en touchant le bouton BIND (Affectation) sur lcran du tableau de bord. Touchez Alerts (Alertes) pour confi gurer les alertes pouvant se produire pendant laffectation. 27 Informations FCC et ISED Les informations rglementaires FCC et ISED de lmetteur iX20 sont disponibles dans le menu Paramtres Systme. 1. Appuyez sur le bouton Paramtres Systme sur lun des crans principaux. 2. Appuyez sur Rglementaire pour ouvrir. Garantie et rparations Dure de la garantie Garantie exclusive - Horizon Hobby, LLC (Horizon) garantit que le Produit achet (le Produit ) sera exempt de dfauts matriels et de fabrication sa date dachat par lAcheteur. La dure de garantie correspond aux dispositions lgales du pays dans lequel le produit a t acquis. La dure de garantie est de 6 mois et la dure dobligation de garantie de 18 mois lexpiration de la priode de garantie. Limitations de la garantie
(a) La garantie est donne lacheteur initial ( Acheteur ) et nest pas transfrable. Le recours de lacheteur consiste en la rparation ou en lchange dans le cadre de cette garantie. La garantie sapplique uniquement aux produits achets chez un revendeur Horizon agr. Les ventes faites des tiers ne sont pas couvertes par cette garantie. Les revendications en garantie seront acceptes sur fourniture dune preuve dachat valide uniquement. Horizon se rserve le droit de modifi er les dispositions de la prsente garantie sans avis pralable et rvoque alors les dispositions de garantie existantes.
(b) Horizon nendosse aucune garantie quant la vendabilit du produit ou aux capacits et la forme physique de lutilisateur pour une utilisation donne du produit. Il est de la seule responsabilit de lacheteur de vrifi er si le produit correspond ses capacits et lutilisation prvue.
(c) Recours de lacheteur Il est de la seule discrtion dHorizon de dterminer si un produit prsentant un cas de garantie sera rpar ou chang. Ce sont l les recours exclusifs de lacheteur lorsquun dfaut est constat. Horizon se rserve la possibilit de vrifi er tous les lments utiliss et susceptibles dtre intgrs dans le cas de garantie. La dcision de rparer ou de remplacer le produit est du seul ressort dHorizon. La garantie exclut les dfauts esthtiques ou les dfauts provoqus par des cas de force majeure, une manipulation incorrecte du produit, une utilisation incorrecte ou commerciale de ce dernier ou encore des modifi cations de quelque nature quelles soient. La garantie ne couvre pas les dgts rsultant dun montage ou dune manipulation errons, daccidents ou encore du fonctionnement ainsi que des tentatives dentretien ou de rparation non effectues par Horizon. Les retours effectus par le fait de lacheteur directement Horizon ou lune de ses reprsentations nationales requirent une confi rmation crite. 28 Limitation des dgts Horizon ne saurait tre tenu pour responsable de dommages consquents directs ou indirects, de pertes de revenus ou de pertes commerciales, lis de quelque manire que ce soit au produit et ce, indpendamment du fait quun recours puisse tre formul en relation avec un contrat, la garantie ou lobligation de garantie. Par ailleurs, Horizon nacceptera pas de recours issus dun cas de garantie lorsque ces recours dpassent la valeur unitaire du produit. Horizon nexerce aucune infl uence sur le montage, lutilisation ou la maintenance du produit ou sur dventuelles combinaisons de produits choisies par lacheteur. Horizon ne prend en compte aucune garantie et naccepte aucun recours pour les blessures ou les dommages pouvant en rsulter. En utilisant et en montant le produit, lacheteur accepte sans restriction ni rserve toutes les dispositions relatives la garantie fi gurant dans le prsent document. Si vous ntes pas prt, en tant quacheteur, accepter ces dispositions en relation avec lutilisation du produit, nous vous demandons de restituer au vendeur le produit complet, non utilis et dans son emballage dorigine. Indications relatives la scurit Ceci est un produit de loisirs perfectionn et non un jouet. Il doit tre utilis avec prcaution et bon sens et ncessite quelques aptitudes mcaniques ainsi que mentales. Lincapacit utiliser le produit de manire sre et raisonnable peut provoquer des blessures et des dgts matriels consquents. Ce produit nest pas destin tre utilis par des enfants sans la surveillance par un tuteur. La notice dutilisation contient des indications relatives la scurit ainsi que des indications concernant la maintenance et le fonctionnement du produit. Il est absolument indispensable de lire et de comprendre ces indications avant la premire mise en service. Cest uniquement ainsi quil sera possible dviter une manipulation errone et des accidents entranant des blessures et des dgts. Questions, assistance et rparations Votre revendeur spcialis local et le point de vente ne peuvent effectuer une estimation dligibilit lapplication de la garantie sans avoir consult Horizon. Cela vaut galement pour les rparations sous garantie. Vous voudrez bien, dans un tel cas, contacter le revendeur qui conviendra avec Horizon dune dcision approprie, destine vous aider le plus rapidement possible. Maintenance et rparation Si votre produit doit faire lobjet dune maintenance ou dune rparation, adressez-vous soit votre revendeur spcialis, soit directement Horizon. Emballez le produit soigneusement. Veuillez noter que le carton demballage dorigine ne suffi t pas, en rgle gnrale, protger le produit des dgts pouvant survenir pendant le transport. Faites appel un service de messagerie proposant une fonction de suivi et une assurance, puisque Horizon ne prend aucune responsabilit pour lexpdition du produit jusqu sa rception accepte. Veuillez joindre une preuve dachat, une description dtaille des dfauts ainsi quune liste de tous les lments distincts envoys. Nous avons de plus besoin dune adresse complte, dun numro de tlphone (pour demander des renseignements) et dune adresse de courriel. Garantie et rparations Les demandes en garantie seront uniquement traites en prsence dune preuve dachat originale manant dun revendeur spcialis agr, sur laquelle fi gurent le nom de lacheteur ainsi que la date dachat. Si le cas de garantie est confi rm, le produit sera rpar. Cette dcision relve uniquement de Horizon Hobby. Rparations payantes En cas de rparation payante, nous tablissons un devis que nous transmettons votre revendeur. La rparation sera seulement effectue aprs que nous ayons reu la confi rmation du revendeur. Le prix de la rparation devra tre acquitt au revendeur. Pour les rparations payantes, nous facturons au minimum 30 minutes de travail en atelier ainsi que les frais de rexpdition. En labsence dun accord pour la rparation dans un dlai de 90 jours, nous nous rservons la possibilit de dtruire le produit ou de lutiliser autrement. ATTENTION : Nous neffectuons de rparations payantes que pour les composants lectroniques et les moteurs. Les rparations touchant la mcanique, en particulier celles des hlicoptres et des voitures radiocommandes, sont extrmement coteuses et doivent par consquent tre effectues par lacheteur lui-mme. 10/2015 Informations de contact Pays dachat Horizon Hobby Union europenne Horizon Technischer Service Sales: Horizon Hobby GmbH Numro de tlphone/
Adresse de courriel service@horizonhobby.eu
+49 (0) 4121 2655 100 Adresse Hanskampring 9 D 22885 Barsbttel, Germany Information IC CAN ICES-3 (B)/NMB-3(B) Contains IC: 6157A-PLANO1T IC: 6157A-IX20 Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Informations de conformit pour lUnion Europenne Instructions relatives llimination des D3E pour les utilisateurs rsidant dans lUnion Europenne Ce produit ne doit pas tre limin avec dautres dchets. Il est de la responsabilit de lutilisateur dliminer les quipements rebuts en les remettant un point de collecte dsign en vue du recyclage des dchets dquipements lectriques et lectroniques. La collecte et le recyclage spars de vos quipements usags au moment de leur mise au rebut aideront prserver les ressources naturelles et assurer le recyclage des dchets de manire protger la sant humaine et lenvironnement. Pour plus dinformations sur les points de collecte de vos quipements usags en vue du recyclage, veuillez contacter votre mairie, votre service de collecte des ordures mnagres ou le magasin dans lequel vous avez achet le produit. Dclaration de conformit de lunion europenne :
SPM iX20 20-Channel 2.4GHz DSMX Aircraft System (SPMR20100) Horizon Hobby, LLC dclare par la prsente que ce produit est en conformit avec les exigences essentielles et les autres dispositions de la Directive RED. Une copie de la dclaration de conformit Europenne est disponible :
http://www.horizonhobby.com/content/support-render-compliance. 2.4 Control:
Frequency Band: 2402-2478MHz Max EIRP: 20 dBm 2.4 Trainer:
Frequency Band: 2404-2478MHz Max EIRP: 3 dBm 2.4 WiFi:
Frequency Band: 2412-2462MHz Max EIRP: 19.5 dBm 5GHz WiFi:
Frequency Band: 4900-5845MHz Max EIRP: 15.5 dBm Bluetooth:
Frequency Band: 2404-2480MHz Max EIRP: 10 dBm 29 AVVISO Istruzioni, garanzie e tutti gli altri documenti accessori sono soggetti a modifi che a totale discrezione di Horizon Hobby, LLC. Per avere una documentazione aggiornata sul prodotto, visitare il sito Web www.horizonhobby.com o www.towerhobbies.com e fare clic sulla scheda di supporto per questo prodotto. Signi cato di termini specialistici:
I seguenti termini vengono utilizzati in tutta la documentazione relativa al prodotto per indicare il livello di eventuali danni collegati allutilizzo di questo prodotto:
AVVERTENZA: procedure che, se non debitamente seguite, possono provocare danni materiali, danni collaterali e lesioni gravi O comportare unalta probabilit di lesioni superfi ciali. ATTENZIONE: procedure che, se non debitamente seguite, possono provocare danni fi sici a oggetti E gravi lesioni a persone. AVVISO: procedure che, se non debitamente seguite, espongono al rischio di danni alle cose E a una possibilit minima o nulla di lesioni personali. AVVERTENZA: Leggere TUTTO il manuale di istruzioni e prendere familiarit con le caratteristiche del prodotto, prima di farlo funzionare. Se il prodotto non utilizzato in modo corretto potrebbero verifi carsi danni al prodotto, alle persone o alle cose, causando gravi lesioni. Questo un sofi sticato prodotto di hobbistica. Esso deve essere manipolato con cautela e giudizio e richiede qualche conoscenza di base di meccanica. Se il prodotto non utilizzato in maniera sicura e responsabile potrebbero verifi carsi lesioni o danni al prodotto stesso o ad altre propriet. Questo prodotto non concepito per essere usato dai bambini senza la diretta supervisione di un adulto. Non tentare in nessun caso di smontare il prodotto, di utilizzarlo con componenti non compatibili o di potenziarlo senza previa approvazione di Horizon Hobby, LLC. Questo manuale contiene istruzioni relative a sicurezza, utilizzo e manutenzione del prodotto. fondamentale leggere e seguire tutte le istruzioni e le avvertenze nel manuale prima di montare, mettere a punto o usare il prodotto, al fi ne di usarlo correttamente e di evitare danni o lesioni gravi. Et consigliata: non per bambini al di sotto dei 14 anni. Questo prodotto non un giocattolo. AVVISO: lutilizzo di questo prodotto previsto esclusivamente per veicoli e aerei per modellismo, comandati a distanza, senza pilota. Horizon Hobby declina qualsiasi responsabilit per lutilizzo al di fuori dello scopo previsto e non fornir servizio di garanzia in relazione a tale utilizzo. Precauzioni di sicurezza Prima di utilizzare il modello, assicurarsi sempre che tutte le batterie siano state accuratamente caricate. Prima di ogni utilizzo, verifi care sempre tutti i servocomandi e i loro collegamenti. Non utilizzare mai il proprio modello nelle vicinanze di spettatori, parcheggi o di qualsiasi altra area in cui potrebbero verifi carsi lesioni alle persone o danni alle propriet. Non utilizzare mai il proprio modello in caso di condizioni meteorologiche avverse. La scarsa visibilit pu causare disorientamento e perdita di controllo del proprio modello. Non puntare mai lantenna della trasmittente verso il modello. Il diagramma di radiazione dalla punta dellantenna intrinsecamente basso. Se in qualsiasi momento, durante lattivazione del proprio modello, si dovesse notare un eventuale funzionamento irregolare o anomalo, interrompere immediatamente lutilizzo del proprio modello fi no alla verifi ca della causa del problema e alla risoluzione dello stesso. 30 Speci cazioni Canali Memoria modello Opzioni di programmazione Modulazione Banda 20 250 Aeroplano / Elicottero / Aliante /
Multirotore DSM2/DSMX 2,4 GHz Funzioni della trasmittente Funzione 1 Antenna 2 Touchscreen LCD 3 Interruttore E2 4 Manopola destra 5 Interruttore E 6 Trim superiore DX 7 Interruttore H 8 Interruttore G 9 Interruttore F 10 Regolazione cinghia gas (Modo 1, 3) 11 Coperture limitatori corsa gimbal 12 Regolazione tensione leva posteriore*
13 Cambio modalit, vite centraggio gimbal 14 Motore/Alettone (Modo 1) Elevatore/Alettone (Modo 2) Motore/Timone (Modo 3) Elevatore/Timone (Modo 4) alto/basso*
15 Regolazione tensione stick gimbal 16 Regolazione tensione stick gimbal sinistra/destra*
Risoluzione Frame Rate Modalit Tipo batteria Alimentatore caricabatterie
(non incluso) Funzione Trim gas (Modo 1, 3) 17 Trim alettone (Modo 1, 2) Trim timone (Modo 3, 4) 18 Trim elevatore (Modo 2, 4) 19 Gancio per tracolla 20 Interruttore D2 21 Interruttore I 22 Interruttore D 23 Trim superiore SX 24 Interruttore A 25 Interruttore B 26 Interruttore C 27 Regolazione tensione stick gimbal 28 Regolazione tensione stick gimbal alto/basso*
sinistra/destra*
Elevatore/Timone (Modo 1) Motore/Timone (Modo 2) Elevatore/Alettone (Modo 3) Motore/Alettone (Modo 4) 29 1 41 43 44 42 20 21 22 23 24 25 26 11 27*
12 28*
29 13 11 30 31 32 4 6 7 8 3 5 9 10 11 12*
13 14 15*
16*
11 17 18 19 33 34 35 36 37 2
* Non allentare eccessivamente le viti di regolazione della tensione del gimbal. Farlo pu causare la caduta delle viti. 31 2048 11/22 ms modalit selezionabili dallutente: 1-4 ioni di litio, 10.500 mAh Uscita minima 2-3 A Funzione 30 Trim timone (Modo 1, 2) Trim alettone (Modo 3, 4) 31 Regolazione cinghia gas (Modo 2, 4) 32 Trim elevatore (Modo 1, 3) Trim gas (Modo 2, 4) 33 Leva posteriore destra 34 Lenti camera 35 Porta scheda memoria micro 36 Porta di carica USB 37 Coperchio batterie 38 Leva posteriore sinistra 39 Porta interfaccia seriale 40 Jack audio 41 Trim sinistro 42 Pulsante di accensione 43 LED 44 Trim destro 21 23 25 24 38 39 40 Avvertenze sulla ricarica Durante lutilizzo di questo prodotto, ignorare le necessarie cautele e non osservare le seguenti avvertenze potrebbe comportare il malfunzionamento del prodotto e determinare problemi di natura elettrica, calore eccessivo, INCENDI e in defi nitiva lesioni e danni alle propriet. Prima di utilizzare questo prodotto, leggere tutte le precauzioni di sicurezza e la documentazione Alle persone minorenni non deve mai essere consentito ricaricare i pacchi batterie Non far mai cadere il caricabatterie o le batterie Non cercare mai di ricaricare batterie danneggiate Non cercare mai di ricaricare un pacco batterie che comprende diversi tipi di batterie Non cercare mai di caricare una batteria se il cavo stato pizzicato o cortocircuitato Non lasciare mai che le batterie o i pacchi batterie entrino in contatto, in qualsiasi momento, con umidit Non caricare mai le batterie in luoghi estremamente caldi o freddi (si consiglia una temperatura compresa tra 10 C e 27 C) e non esporle mai alla luce diretta solare Scollegare sempre la trasmittente dopo la carica e lasciare che il caricabatterie si raffreddi tra una carica e laltra Ispezionare sempre una batteria nuova prima di caricarla Se il prodotto presenta malfunzionamenti, interrompere sempre qualsiasi procedura e contattare Horizon Hobby Tenere sempre le batterie e il caricabatterie lontani da qualsiasi materiale che potrebbe risentire del calore (ad esempio ceramica e piastrelle), dal momento che essi potrebbero diventare caldi Terminare sempre la procedura di carica se il caricabatterie o la batteria diventano caldi al tocco o se iniziano a cambiare forma (gonfi arsi) durante la procedura di carica Carica Per ottenere risultati di ricarica ottimali, il caricabatterie integrato richiede un alimentatore USB con potenza in uscita di almeno 2-3A. Luso di un alimentatore con unuscita inferiore comporta tempi di ricarica molto lunghi o la mancata ricarica della trasmittente se questa tenuta accesa durante la ricaricare. Il tempo di prima ricarica della trasmittente pu essere pari a 6-7 ore. Collocare sempre la trasmittente in carica su una superfi cie resistente al calore. Carica:
1. Collegare lalimentatore (non incluso) a una presa di corrente alternata. 2. Collegare il cavo Micro USB allalimentatore e alla porta di carica del trasmettitore come mostrato in fi gura. 3. Il LED lampeggia in blu durante la carica. Premere brevemente linterruttore di alimentazione per visualizzare licona della batteria in carica sul display touchscreen a colori. 4. La carica completa quando il LED blu lampeggiante si ferma. Completata la carica, scollegare prima il cavo USB e poi lalimentatore dalla presa di alimentazione. ATTENZIONE: non lasciare mai incustodite le batterie in carica. ATTENZIONE: non modifi care mai la soglia di tensione minima per le batterie agli ioni di litio impostandola a meno di 3,3 V. Farlo pu portare la batteria a scaricarsi eccessivamente, danneggiando sia la batteria che la trasmittente. ATTENZIONE: non caricare mai la batteria togliendola dalla trasmittente. Caricare la batteria allesterno della trasmittente pu interferire con il sistema di monitoraggio della batteria, generando falsi allarme di batteria scarica. 32 SUGGERIMENTI:
Premere una volta il pulsante di accensione per mettere il display in modo sospensione. La radio continua a trasmettere normalmente anche se lo schermo in modo sospensione. Premere nuovamente il pulsante di accensione per riattivare lo schermo. Premendo due volte il tasto di accensione si apre una fi nestra che consente di selezionare On/Off radio, On/Off schermo, On/Off WiFi, On/Off Bluetooth or Quick Sleep
(Sospensione Rapida) per impostare il sistema in modalit sospensione. Nei giorni in cui si vola, si consiglia di utilizzare la modalit sospensione piuttosto che spegnere il sistema. La trasmittente pu essere lasciata in modalit sospensione in sicurezza per 1-2 giorni. Spegnere la trasmittente se non si prevede di utilizzarla entro 2 giorni. Se la trasmittente non viene spenta, la batteria continuer a scaricarsi progressivamente. Home 1 2 3 4 Accensione/spegnimento della trasmittente iX20 La trasmittente iX20 dotata di pulsante ON/OFF. 1. Per accendere la trasmittente, tenere premuto il pulsante di accensione per diversi secondi fi no a quando il LED lampeggia e lo schermo LCD mostra la schermata di avvio. Lindicatore LED arancione si accende immediatamente, indicando che la trasmittente sta inviando un segnale radio. Come normale per i dispositivi intelligenti, lavvio richiede circa 30 secondi. Completato lavvio, lapp Spektrum AirWare si avvia automaticamente, cosa che richiede altri 15 secondi (circa). 2. Per spegnere la trasmittente, premere e tenere premuto il pulsante di accensione per diversi secondi fi no a quando sullo schermo appare la richiesta Power Off / Reboot
(Spegnimento / Riavvio). 3. Premere "Power Off" per spegnere OPPURE Restart per riavviare il sistema. Navigazione Lapp della trasmittente iX20 basata sul sistema operativo Android e mostra un display a colori touchscreen a grandi dimensioni. Navigare liX20 usando le azioni e i gesti tipicamente impiegati per qualsiasi altro dispositivo Android. Utilizzare le dita per selezionare, far scorrere e trascinare le icone e i menu mostrati sullo schermo. Premere a lungo per confermare: Quando si vede questa icona, tenere premuto per circa 2 secondi per confermare la scelta. Navigazione Android Lapp Spektrum AirWare nasconde le icone di navigazione della schermata iniziale di Android. Per accedere alle icone di navigazione Android in qualsiasi momento, scorrere verso lalto dal bordo inferiore dello schermo. Premere licona a cerchio per andare alla schermata iniziale di Android. 1. ALL APPS (TUTTE LE APP): contiene le applicazioni caricate sulliX20. 2. BACK (INDIETRO): torna alla schermata precedente. 3. HOME: torna alla schermata iniziale. 4. OVERVIEW (PANORAMICA): permette di spostarsi tra e chiudere le varie app in esecuzione. Schermata noti che 1. Far scorrere una volta le dita verso il basso dalla parte superiore della schermata per uscire dalla modalit schermo intero e portare in avanti le icone di navigazione della schermata iniziale. 2. Far scorrere le dita una seconda volta per far scendere la Schermata notifi che per un accesso rapido a:
Settings (Impostazioni) User info (Info utente) Brightness (luminosit) WiFi Bluetooth Landscape (Paesaggio) Location (Posizione) Cast Screen|
(Schermata lancio) 33 Navigazione Spektrum AirWare Lapp iX20 Spektrum AirWare ha fi no a quattro schermate principali a cui si pu accedere rapidamente scorrendo verso sinistra o destra sul display touchscreen. Le schermate Dashboard e Monitor sono sempre disponibili. La Dashboard Telemetria e Min/Max Telemetria sono disponibili solo se sono presenti le informazioni di telemetria. Dashboard (Cruscotto): la schermata principale che visualizza i Trim e i Timer come anche il nome e limmagine del modello. Monitor: rappresentazione grafi ca di tutti i comandi. Telemetry Dashboard* (Cruscotto telemetria): mostra le informazioni di telemetria per ciascun sensore. Lutente sceglie quali elementi visualizzare su questa pagina dal menu setup telemetria. Pagine aggiuntive relative alla telemetria sono disponibili quando attivate nel menu setup telemetria. Telemetry Min/Max* (valori minimi/massimi telemetria):
registra i valori minimi e massimi di telemetria raccolti da ciascun sensore di telemetria. Disponibile solo se la telemetria attiva e la trasmittente collegata a un ricevitore di telemetria. Dashboard Monitor Telemetria Min/max telemetria La Dashboard e le altre schermate principali contengono informazioni comuni e opzioni di navigazione per accedere alle funzioni della trasmittente iX20. Premere a lungo per tornare alla Dashboard da qualsiasi delle schermate principali Tensione e capacit batteria disponibili Potenza del Segnale di Telemetria Volume Schermata principale attiva: Toccare o scorrere lo schermo a sinistra o a destra per cambiare Nome modello:
toccare per il menu delle utilit modello) OPPURE premere a lungo per accedere rapidamente allaccesso diretto al modello per cambiare il modello attivo Tasti di navigazione Spektrum AirWare Controllo volume Toccare licona del volume (
) nellangolo in alto a destra di una qualsiasi delle schermate principali per accedere al menu Volume della iX20. Spostare il cursore su e gi per regolare il volume. Toccare il tasto Mute (
) per silenziare tutti i suoni allinterno dellapp Spektrum AirWare. Reset telemetria Quando la trasmittente collegata a un ricevitore di telemetria, le barre della potenza del segnale di telemetria appaiono nella barra superiore della schermata principale (
a lungo le barre di potenza per resettare i dati di volo della telemetria e cancellare i dati min/max.
). Premere 34 Tasti di navigazione Spektrum AirWare I tasti di navigazione Spektrum AirWare sono disponibili in tutte le schermate principali:
My List Model Adjust Per uscire da uno qualsiasi dei menu di cui sopra, premere una volta la freccia indietro (
) in alto a sinistra nello schermo per tornare indietro di un menu oppure tenere premuta la freccia indietro per tornare direttamente alla Dashboard. Model Setup System Settings My List (Il mio elenco) Il mio elenco consente di creare un elenco di scorciatoie per navigare rapidamente alle funzioni pi utilizzate. Per creare un elenco di scorciatoie:
1. Toccare il tasto My List nella schermata principale. 2. Toccare il pulsante Confi gure (Confi gura) e selezionare le funzioni da aggiungere allelenco. Le funzioni selezionate vengono contrassegnate con un segno di spunta accanto al nome. 3. Toccare il pulsante Save (Salva) per salvare lelenco. Le funzioni selezionate sono ora disponibili nella schermata My List. Il tasto My List confi gurabile per ogni modello e pu essere attivato o disattivato dal tasto Model Setup (Setup modello), menu Setup Menu (Setup menu). Model Adjust (Regolazione modello) Il menu Model Adjust contiene funzioni e regolazioni che vengono utilizzate per fi nalizzare le impostazioni per la confi gurazione di un modello. Le opzioni del menu Model Adjust variano a seconda del tipo di modello selezionato durante la confi gurazione iniziale del modello e del tipo di aeromobile selezionato nel menu Model Setup. Tra le opzioni vi sono:
Servo Setup (Imposta servo) Dual Rate / Expo Throttle Cut (Taglio gas) Throttle Curve (Curva gas) Model Setup (Impostazioni modello) Le opzioni del menu Model Setup sono utilizzate per la confi gurazione di base dellaeromodello. Lelenco dei menu varia a seconda del tipo di modello. Le opzioni del menu Model Setup includono:
Frame Rate Range Test (Prova portata) Aircraft Type (Tipo aeromodello) Timer Telemetria Trainer Audio Events (Eventi audio) Trim Setup (Imposta trim) Flight Mode Setup Mixing (Miscelazione) Flap System (Sistema fl ap) Sequencer (Sequenziatore) Menu Setup (Setup menu) Sleep Mode
(Setup interruttori digitali)
(Modalit sospensione) Digital Switch Setup Model Start Warnings
(Setup porta seriale) Serial Port Setup
(Avvertenze di avvio del modello)
(Setup modalit di volo) Channel Assign
(Assegnazione canali) Analog Switch Setup Bind (Connessione) Swash Type (Tipo piatto) Sail Type (Tipo aliante) Trim/Channel Confi g
(Setup interruttori analogici)
(Confi gurazione trim/canale) 35 System Settings (Impostazioni di sistema) Le opzioni del menu System Settings vengono utilizzate per effettuare le regolazioni del sistema del trasmettitore e per accedere al manuale. Le opzioni del menu System Settings includono:
System Confi guration Calibration (Calibrazione) Manuale Regulatory (Normativo)
(Confi gurazione del sistema) Product Information
(Informazioni sul prodotto) Creazione di un nuovo modello 1. Creare un nuovo modello toccando licona a penna (
) situata nella parte superiore sinistra della Dashboard per accedere alla schermata Model Utilities (Utilit modello). Se il collegamento radio acceso, il sistema apre una fi nestra di dialogo per confermare che il collegamento radio sar spento per accedere a questo menu. Tenere premuto PROCEED (PROCEDI) per continuare. 2. Premere sullicona Espandi ( ) nellangolo in alto a destra della schermata Model Utilities. 3. Selezionare Add a New Model (Aggiungi un nuovo modello) dal menu a discesa. 4. Selezionare Default. 5. Selezionare il tipo di modello desiderato tra Airplane
(Aeroplano), Helicopter (Elicottero), Sailplane (Aliante) o Multirotor (Multirotore). 6. Selezionare Create (Crea). 7. Il modello viene aggiunto allelenco Model Utilities ed il modello attivo, indicato da un contorno arancione. 8. Tenere premuta la freccia indietro (
Dashboard.
) per tornare alla CONSIGLIO: selezionare il nuovo modello nellelenco Model Utilities per passare alla pagina Model Details (Dettagli modello) del modello per accedere a queste caratteristiche:
Change Model Name Duplicate Model
(Cambia nome modello) Change Model Image
(Cambia tipo modello) Monitor Channel Count
(Duplica il modello) Reset Model
(Reimposta il modello) Delete Model
(Conteggio canali monitor)
(Cancella il modello) Edit Model Type
(Modifi ca il tipo di modello) Reset Model Timer Export Model (Esporta modello) Save As Template
(Salva come modello)
(Reimposta il timer modello) Model Note (Note modello) Binding (connessione) Il binding la procedura di connessione tra la trasmittente iX20 e il ricevitore dellaeromodello. LiX20 compatibile con i ricevitori originali DSM e DSMX Spektrum. La versione UE delliX20 non supporta i ricevitori DSM2. Accedere al menu Bind dal menu Model Setup (Setup modello) o direttamente toccando il tasto BIND nella schermata della Dashboard. Toccare Alerts (Avvisi) per confi gurare eventuali avvisi che si verifi cano durante il binding. 36 Informazioni FCC e ISED Le informazioni sulla regolamentazione FCC e ISED per il trasmettitore iX20 sono disponibili nel menu Impostazioni di sistema. 1. Tocca il pulsante Impostazioni di sistema su una delle schermate principali. 2. Tocca Regolamentazione per aprire. Garanzia Periodo di garanzia La garanzia esclusiva - Horizon Hobby, LLC (Horizon) garantisce che i prodotti acquistati (il Prodotto) sono privi di difetti relativi ai materiali e di eventuali errori di montaggio. Il periodo di garanzia conforme alle disposizioni legali del paese nel quale il prodotto stato acquistato. Tale periodo di garanzia ammonta a 6 mesi e si estende ad altri 18 mesi dopo tale termine. Limiti della garanzia
(a) La garanzia limitata allacquirente originale (Acquirente) e non cedibile a terzi. Lacquirente ha il diritto a far riparare o a far sostituire la merce durante il periodo di questa garanzia. La garanzia copre solo quei prodotti acquistati presso un rivenditore autorizzato Horizon. Altre transazioni di terze parti non sono coperte da questa garanzia. La prova di acquisto necessaria per far valere il diritto di garanzia. Inoltre, Horizon si riserva il diritto di cambiare o modifi care i termini di questa garanzia senza alcun preavviso e di escludere tutte le altre garanzie gi esistenti.
(b) Horizon non si assume alcuna garanzia per la disponibilit del prodotto, per ladeguatezza o lidoneit del prodotto a particolari previsti dallutente. sola responsabilit dellacquirente il fatto di verifi care se il prodotto adatto agli scopi da lui previsti.
(c) Richiesta dellacquirente spetta soltanto a Horizon, a propria discrezione riparare o sostituire qualsiasi prodotto considerato difettoso e che rientra nei termini di garanzia. Queste sono e uniche rivalse a cui lacquirente si pu appellare, se un prodotto difettoso. Horizon si riserva il diritto di controllare qualsiasi componente utilizzato che viene coinvolto nella rivalsa di garanzia. Le decisioni relative alla sostituzione o alla riparazione avvengono solo in base alla discrezione di Horizon. Questa garanzia non copre dei danni superfi ciali o danni per cause di forza maggiore, uso errato del prodotto, negligenza, uso ai fi ni commerciali, o una qualsiasi modifi ca a qualsiasi parte del prodotto. Questa garanzia non copre danni dovuti ad una installazione errata, ad un funzionamento errato, ad una manutenzione o un tentativo di riparazione non idonei a cura di soggetti diversi da Horizon. La restituzione del prodotto a cura dellacquirente, o da un suo rappresentante, deve essere approvata per iscritto dalla Horizon. Limiti di danno Horizon non si riterr responsabile per danni speciali, diretti, indiretti o consequenziali; perdita di profi tto o di produzione;
perdita commerciale connessa al prodotto, indipendentemente dal fatto che la richiesta si basa su un contratto o sulla garanzia. Inoltre la responsabilit di Horizon non supera mai in nessun caso il prezzo di acquisto del prodotto per il quale si chiede la responsabilit. Horizon non ha alcun controllo sul montaggio, sullutilizzo o sulla manutenzione del prodotto o di combinazioni di vari prodotti. Quindi Horizon non accetta nessuna responsabilit per danni o lesioni derivanti da tali circostanze. Con lutilizzo e il montaggio del prodotto lutente acconsente a tutte le condizioni, limitazioni e riserve di garanzia citate in questa sede. Qualora lutente non fosse pronto ad assumersi tale responsabilit associata alluso del prodotto, si suggerisce di restituire il prodotto intatto, mai usato e immediatamente presso il venditore. Indicazioni di sicurezza Questo un prodotto sofi sticato di hobbistica e non un giocattolo. Esso deve essere manipolato con cautela, con giudizio e richiede delle conoscenze basilari di meccanica e delle facolt mentali di base. Se il prodotto non verr manipolato in maniera sicura e responsabile potrebbero risultare delle lesioni, dei gravi danni a persone, al prodotto o allambiente circostante. Questo prodotto non concepito per essere usato dai bambini senza una diretta supervisione di un adulto. Il manuale del prodotto contiene le istruzioni di sicurezza, di funzionamento e di manutenzione del prodotto stesso. fondamentale leggere e seguire tutte le istruzioni e le avvertenze nel manuale prima di mettere in funzione il prodotto. Solo cos si eviter un utilizzo errato e di preverranno incidenti, lesioni o danni. Domande, assistenza e riparazioni Il vostro negozio locale e/o luogo di acquisto non possono fornire garanzie di assistenza o riparazione senza previo colloquio con Horizon. Questo vale anche per le riparazioni in garanzia. Quindi in tale casi bisogna interpellare un rivenditore, che si metter in contatto subito con Horizon per prendere una decisione che vi possa aiutare nel pi breve tempo possibile. 37 Manutenzione e riparazione Se il prodotto deve essere ispezionato o riparato, si prega di rivolgersi ad un rivenditore specializzato o direttamente ad Horizon. Il prodotto deve essere Imballato con cura. Bisogna far notare che i box originali solitamente non sono adatti per effettuare una spedizione senza subire alcun danno. Bisogna effettuare una spedizione via corriere che fornisce una tracciabilit e unassicurazione, in quanto Horizon non si assume alcuna responsabilit in relazione alla spedizione del prodotto. Inserire il prodotto in una busta assieme ad una descrizione dettagliata dei problemi e ad una lista di tutti i singoli componenti spediti. Inoltre abbiamo bisogno di un indirizzo completo, di un numero di telefono per rivolgere ulteriori domande e di un indirizzo e-mail. Garanzia a riparazione Le richieste in garanzia verranno elaborate solo se presente una prova dacquisto in originale proveniente da un rivenditore specializzato autorizzato, nella quale ben visibile la data di acquisto. Se la garanzia viene confermata, allora il prodotto verr riparato o sostituito. Questa decisione spetta esclusivamente a Horizon Hobby. Riparazioni a pagamento Se bisogna effettuare una riparazione a pagamento, effettueremo un preventivo che verr inoltrato al vostro rivenditore. La riparazione verr effettuata dopo lautorizzazione da parte del vostro rivenditore. La somma per la riparazione dovr essere pagata al vostro rivenditore. Le riparazioni a pagamento avranno un costo minimo di 30 minuti di lavoro e in fattura includeranno le spese di restituzione. Qualsiasi riparazione non pagata e non richiesta entro 90 giorni verr considerata abbandonata e verr gestita di conseguenza. ATTENZIONE : Le riparazioni a pagamento sono disponibili solo sullelettronica e sui motori. Le riparazioni a livello meccanico, soprattutto per gli elicotteri e le vetture RC sono molto costose e devono essere effettuate autonomamente dallacquirente. 10/2015 Informazioni per i contatti Paese di acquisto Horizon Hobby Telefono / indirizzo e-mail Indirizzo Unione Europea Horizon Technischer Service Sales: Horizon Hobby GmbH service@horizonhobby.eu
+49 (0) 4121 2655 100 Hanskampring 9 D 22885 Barsbttel, Germany Informazioni sulla conformit per lUnione Europea Istruzioni per lo smaltimento RAEE da parte degli utenti dellUnione Europea Questo prodotto non deve essere smaltito assieme ai rifi uti domestici. Al contrario, lutente responsabile dello smaltimento di tali rifi uti, che devono essere portati in un centro di raccolta designato per il riciclaggio di rifi uti elettrici e apparecchiature elettroniche. La raccolta differenziata e il riciclaggio di tali rifi uti provenienti da apparecchiature, nel momento dello smaltimento aiuteranno a preservare le risorse naturali e garantiranno un riciclaggio adatto a proteggere il benessere delluomo e dellambiente. Per maggiori informazioni sui centri di raccolta, contattare il proprio uffi cio locale, il servizio di smaltimento rifi uti o il negozio presso il quale stato acquistato il prodotto. Dichiarazione di conformit UE:
SPM iX20 20-Channel 2.4GHz DSMX Aircraft System (SPMR20100) Horizon Hobby, LLCcon la presente dichiara che il prodotto conforme ai requisiti essenziali e ad altre disposizioni rilevanti della RED direttiva. Una copia della dichiarazione di conformit per lUnione Europea disponibile a:
http://www.horizonhobby.com/content/support-render-compliance. 2.4 Control:
Frequency Band: 2402-2478MHz Max EIRP: 20 dBm 2.4 Trainer:
Frequency Band: 2404-2478MHz Max EIRP: 3 dBm 2.4 WiFi:
Frequency Band: 2412-2462MHz Max EIRP: 19.5 dBm 5GHz WiFi:
Frequency Band: 4900-5845MHz Max EIRP: 15.5 dBm Bluetooth:
Frequency Band: 2404-2480MHz Max EIRP: 10 dBm 38 2018 Horizon Hobby, LLC. DSMX, the DSMX logo, Spektrum AirWare and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. Android is a trademark of Google Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Horizon Hobby is under license. The WiFi logo is a registered trademark of WiFi Alliance. All other trademarks, service marks and logos are property of their respective owners. US 9,930,567. US 7,391,320. Created 05/19 SPMR20100 60269 Max.AntennaGain(dBi) 1.0 Caution:
Note:CetappareilestconformelaPartie15desrglementsdelaFCCetauxnormesRSSde lIndustrieduCanada.Sonfonctionnementestsoumisauxdeuxconditionssuivantes: (1)cet appareil ne doit pas causer des interfrences nuisibles, et (2) cet appareil doit accepter toute interfrence reue, y compris les interfrences qui peuvent provoquer un fonctionnement indsirable. Lefabricantn'estpasresponsabledestoutesinterfrencesradiooutlvisioncausespardes modificationsnonautorisesapportescetappareil.Detellesmodificationspeuventempcher lutilisateurdutiliserl'appareil. Leprsentmetteurradio(identifierledispositifparsonnumrodecertificationousonnumro demodles'ilfaitpartiedumatrieldecatgorieII)atapprouvparIndustrieCanadapour fonctionneraveclestypesd'antennenumrscidessousetayantungainadmissiblemaximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu,sontstrictementinterditspourl'exploitationdel'metteur. AntennaType internalpermanentantenna This device complies with Part 15 of the FCC rules and Industry Canada licenseexempt RSS standard(s).Operationissubjecttothefollowingtwoconditions:(1)thisdevicemaynotcause harmful interference, and (2) this device must accept any interference received, including interferencethatmaycauseundesiredoperation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modificationsorchangetothisequipment.Suchmodificationsorchangecouldvoidtheusers authoritytooperatetheequipment. Thisradiotransmitter(identifythedevicebycertificationnumberormodelnumberifCategoryII) hasbeenapprovedbyIndustryCanadatooperatewiththeantennatypeslistedbelowwiththe maximumpermissiblegainindicated.Antennatypesnotincludedinthislist,havingagaingreater thanthemaximumgainindicatedforthattype,arestrictlyprohibitedforusewiththisdevice. ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice, pursuanttopart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotection againstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcan radiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions, maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethat interference will not occur in a particular installation. If this equipment does cause harmful interferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:
Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris connected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement. To maintain compliance with FCCs RF exposure guidelines, this equipment should be installedandoperatedwithaminimumdistanceof0mmbetweentheradiatorandyour body. 5G For 5150-5250 and 5725-5850 frequency band, 5G:
Any emission is maintained within the band of operation under all conditions of normal operation. The max. frequency stability is less than 20ppm.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-06-24 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System | ||
3 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2019-06-24
|
||||
1 2 3 | Applicant's complete, legal business name |
Horizon Hobby, LLC
|
||||
1 2 3 | FCC Registration Number (FRN) |
0006301931
|
||||
1 2 3 | Physical Address |
2904 Research Rd.
|
||||
1 2 3 |
Champaign, Illinois 61821
|
|||||
1 2 3 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
t******@timcoengr.com
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
BRW
|
||||
1 2 3 | Equipment Product Code |
IX20
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
C******** D****
|
||||
1 2 3 | Title |
President and EVP Product Management and Marketing
|
||||
1 2 3 | Telephone Number |
217-4********
|
||||
1 2 3 | Fax Number |
217-4********
|
||||
1 2 3 |
c******@horizonhobby.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 3 | DTS - Digital Transmission System | |||||
1 2 3 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | iX20 | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Original Equipment | ||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Output Power listed is the maximum conducted output power. The highest reported SAR is 1.45 W/kg. This device supports 20, 40 and 80 MHz bandwidth modes. | ||||
1 2 3 | Output Power listed is the maximum conducted output power. The highest reported SAR is 0.145 W/kg. This device supports 20 MHz bandwidth modes. | |||||
1 2 3 | Output Power listed is conducted. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
Waltek Services (Shenzhen) Co., Ltd
|
||||
1 2 3 | Name |
P**** Z****
|
||||
1 2 3 | Telephone Number |
+86-7********
|
||||
1 2 3 |
P******@waltek.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | CC | 5180 | 5240 | 0.048 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | CC | 5745 | 5825 | 0.035 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2412 | 2462 | 0.06 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | CC | 2402 | 2480 | 0.002 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0070000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC