all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual 1 | Users Manual | 1009.84 KiB | ||||
1 | Test Report | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Test Setup Photos |
1 | User Manual 1 | Users Manual | 1009.84 KiB |
BLH7601 User Guide EN NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com and click on the support tab for this product. Meaning of Special Language The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:
WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high probability of superficial injury. CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury. NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no possibility of injury. WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not attempt disassembly, use with incompatible components or augment product in any way without the approval of Horizon Hobby, LLC. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury. Age Recommendation: Not for children under 14 years. This is not a toy. Specifications Frequency Input/Output Voltage Type 2404-2476 MHz 3.0-4.2V Ultra Micro 4-in-1 Control Board
(Receiver, ESC, Mixer, Gyro) Receiver Ports Left Front Motor Port Right Front Motor Port Left Rear Motor Port Right Rear Motor Port Receiver Installation Binding Procedure 1. Disconnect the flight battery from the quadcopter. 2. Select a clean model memory on your transmitter (computer radios only). 3. Select Acro or Airplane model type on your transmitter. 4. Make sure all servo reversing is set to Normal on your transmitter. 5. Center all trims on your transmitter. 6. Power off the transmitter and move all switches to the 0 position. Move the throttle to the low/off position. 7. Connect the flight battery in the quadcopter. The blue LED on the 4-in-1 control unit flashes after 5 seconds. 8. Put the transmitter into bind mode while powering on the transmitter. 9. Release the bind button/switch after 23 seconds. The quadcopter is bound when the blue LED on the 4-in-1 control unit turns solid. 10. Disconnect the flight battery and power the transmitter off. IMPORTANT: For subsequent flights, power ON the transmitter for 5 seconds before connecting the flight battery. If you encounter problems, obey binding instructions and refer to the troubleshooting guide for other instructions. If needed, contact the appropriate Horizon product support office. Flight Mode and Rate Selection RTF The nano QX RTF model comes with the Blade MLP4DSM transmitter. This transmitters flight mode selection feature lets the pilot change between stability mode and agility mode. When powered on, this transmitter is automatically in stability mode and high rate. Change flight modes by pressing and releasing the left control stick while the transmitter is powered on. Change rates by pressing and releasing the right control stick. In low-rate mode, the controls cannot reach their maximum values. This mode is typically preferred by pilots looking for smoother/easier control response during first time use. In high-rate mode, the controls can reach their maximum values. This mode is typically preferred by experienced pilots who are ready for fast forward flight and aerobatic maneuvers (loops, rolls, etc.). Stability mode is shown by the flight control board on the quadcopter glowing solid blue. When flown in stability mode, the nano QX will limit the bank angle with full control input and return the aircraft to a neutral flight position when you release the elevator/aileron stick. This mode is typically preferred by pilots during first time use. Agility mode is shown by the flight control board on the quadcopter glowing solid red. When flown in agility mode, the model will not return to a neutral flight position when you release the controls. This mode is typically preferred by experienced pilots who are ready for fast forward flight and aerobatic maneuvers (loops, rolls, etc.). Flight Mode Selection BNF Flight Mode Selection BNF If you purchased a BNF nano QX, the channel 6 switch on your transmitter will select flight If you purchased a BNF nano QX, the channel 6 switch on your transmitter will select flight modes. When the flight control board on the quadcopter is solid blue, the flight mode is set modes. When the flight control board on the quadcopter is solid blue, the flight mode is set to self-stabilizing mode. When the light is solid red, the quadcopter is in agility mode. See to self-stabilizing mode. When the light is solid red, the quadcopter is in agility mode. See the table on the following page for specific setup information. the table on the following page for specific setup information. Troubleshooting Guide Problem Possible Cause Solution Nano QX control response is inconsistent or requires extra trim to neutralize movement. Aircraft not initialized on a level surface. Battery not correctly placed in battery slot. Throttle too high and/or throttle trim is too high Nano QX will not respond to throttle. nano QX moved during initialization. Throttle channel is reversed. Nano QX does not function and smells burnt after connecting the flight battery. Flight battery connected with the wrong polarity. LED on receiver flashes rapidly and aircraft will not respond to transmitter
(during binding). LED on the receiver flashes rapidly and the nano QX will not respond to the transmitter (after binding) Transmitter too near aircraft during binding process. Bind switch or button was not held while transmitter was powered on. Aircraft or transmitter is too close to large metal object, wireless source or another transmitter. Less than a 5-second wait between first powering on the transmitter and connecting the flight battery to the nano QX The nano QX is bound to a different model memory
(ModelMatch transmitters only) Flight battery or transmitter battery charge is too low Aircraft or transmitter is too close to large metal object, wireless source or another transmitter. Disconnect the flight battery, center the control trim and re-
initialize the quadcopter. Adjust battery position so quadcopter balances in the center of the frame. Reset controls with the throttle stick and throttle trim at the lowest setting. Disconnect the flight battery and re-initialize the nano QX while keeping the quadcopter from moving. Disconnect flight battery, reverse the throttle channel on the transmitter, recconnect flight battery. Replace the 4-in-1 board. Connect the flight battery noting proper polarity. Power off the transmitter. Move the transmitter a larger distance from the aircraft. Disconnect and reconnect the flight battery to the aircraft. Follow the binding instructions. Power off transmitter and repeat bind process. Move aircraft and transmitter to another location and attempt binding again. Leave the transmitter powered on. Disconnect and reconnect the flight battery to the nano QX Select the correct model memory on the transmitter. Disconnect and reconnect the flight battery to the nano QX Replace or recharge batteries Move aircraft and transmitter to another location and attempt connecting again. Limited Warranty What this Warranty Covers - Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product purchased (the Product) will be free from defects in materials and workmanship at the date of purchase. What is Not Covered This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modification of or to any part of the Product,
(iv) attempted service by anyone other than a Horizon Hobby authorized service center,
(v) Product not purchased from an authorized Horizon dealer, (vi) Product not compliant with applicable technical regulations, or (vii) use that violates any applicable laws, rules, or regulations. OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASERS INTENDED USE. Purchasers Remedy Horizons sole obligation and purchasers sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASERS SOLE AND EXCLUSIVE REMEDY. Limitation of Liability HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase. Law These terms are governed by Illinois law (without regard to conflict of law principals). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice. WARRANTY SERVICES Questions, Assistance, and Services Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call the toll free telephone number referenced in the Warranty and Service Contact Information section to speak with a Product Support representative. Inspection or Services If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby.com/content/
service-center_render-service-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton. NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery, please contact the appropriate Horizon Product Support office. Warranty Requirements For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon. Non-Warranty Service Should your service not be covered by warranty, service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashiers checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizons Terms and Conditions found on our website http://
www.horizonhobby.com/content/service-center_render-service-center. ATTENTION: Horizon service is limited to Product compliant in the country of use and ownership. If received, a non-compliant Product will not be serviced. Further, the sender will be responsible for arranging return shipment of the un-serviced Product, through a carrier of the senders choice and at the senders expense. Horizon will hold non-compliant Product for a period of 60 days from notification, after which it will be discarded. 10-2015 Warranty and Service Contact Information Country of Purchase Horizon Hobby Contact Information Address Horizon Service Center
(Repairs/Repair Requests) United States of America Horizon Product Support
(Technical Assistance) Sales servicecenter. horizonhobby.com/
RequestForm/
productsupport
@horizonhobby.com. 877-504-0233 websales@horizonhobby.com 800-338-4639 1608 Interstate Dr. Champaign, Illinois, 61822 USA European Union Horizon Technischer Service sales@horizonhobby.eu Sales: Horizon Hobby GmbH +49 (0) 4121 2655 100 Hanskampring 9 D 22885 Barsbttel, Germany FCC Information FCC ID: BRWBLH7601 This equipment has been tested and found to comply with the limits for Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTICE: Modifications to this product will void the users authority to operate this equipment. This product contains a radio transmitter with wireless technology which has been tested and found to be compliant with the applicable regulations governing a radio transmitter in the 2.400GHz to 2.4835GHz frequency range. IC Information BLH7601 Bedienungsanleitung DE HINWEIS Alle Anweisungen, Garantien und anderen zugehrigen Dokumente knnen im eigenen Ermessen von Horizon Hobby, LLC. jederzeit gendert werden. Die aktuelle Produktliteratur finden Sie auf horizonhobby.com unter der Registerkarte Support fr das betreffende Produkt. Spezielle Bedeutungen Die folgenden Begriffe werden in der gesamten Produktliteratur verwendet, um auf unterschiedlich hohe Gefahrenrisiken beim Betrieb dieses Produkts hinzuweisen:
WARNUNG: Wenn diese Verfahren nicht korrekt befolgt werden, ergeben sich wahrscheinlich Sachschden, Kollateralschden und schwere Verletzungen ODER mit hoher Wahrscheinlichkeit oberflchliche Verletzungen. ACHTUNG: Wenn diese Verfahren nicht korrekt befolgt werden, ergeben sich wahrscheinlich Sachschden UND die Gefahr von schweren Verletzungen. HINWEIS: Wenn diese Verfahren nicht korrekt befolgt werden, knnen sich mglicherweise Sachschden UND geringe oder keine Gefahr von Verletzungen ergeben. WARNUNG: Lesen Sie die GESAMTE Bedienungsanleitung, um sich vor dem Betrieb mit den Produktfunktionen vertraut zu machen. Wird das Produkt nicht korrekt betrieben, kann dies zu Schden am Produkt oder persnlichem Eigentum fhren oder schwere Verletzungen verursachen. Dies ist ein hochentwickeltes Hobby-Produkt. Es muss mit Vorsicht und gesundem Menschenverstand betrieben werden und bentigt gewisse mechanische Grundfhigkeiten. Wird dieses Produkt nicht auf eine sichere und verantwortungsvolle Weise betrieben, kann dies zu Verletzungen oder Schden am Produkt oder anderen Sachwerten fhren. Dieses Produkt eignet sich nicht fr die Verwendung durch Kinder ohne direkte berwachung eines Erwachsenen. Versuchen Sie nicht ohne Genehmigung durch Horizon Hobby, LLC das Produkt zu zerlegen, es mit inkompatiblen Komponenten zu verwenden oder auf jegliche Weise zu erweitern. Diese Bedienungsanleitung enthlt Anweisungen fr Sicherheit, Betrieb und Wartung. Es ist unbedingt notwendig, vor Zusammenbau, Einrichtung oder Verwendung alle Anweisungen und Warnhinweise im Handbuch zu lesen und zu befolgen, damit es bestimmungsgem betrieben werden kann und Schden oder schwere Verletzungen vermieden werden. Nicht geeignet fr Kinder unter 14 Jahren. Dies ist kein Spielzeug. Spezifikationen Frequenz Eingangs- / Ausgangsspannung Sorte 2404-2476 MHz 3.0-4.2V Ultra-Mikroempfnger 4-in-1 Controllboard
(Emfanger, ESC, Miscer, Kreisel) Empfngeranschlsse Vorne links Motoranschluss Hinten links Motoranschluss Empfngerinstallation Vorne rechts Motoranschluss Hinten rechts Motoranschluss IC: 6157A-BLH7601 This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, Including interference that may cause undesired operation of the device. Compliance Information for the European Union Horizon Hobby, LLC hereby declares that this product is in compliance with the essential requirements and other relevant provisions of the RED Directive. Bindevorgang A copy of the EU Declaration of Conformity is available online at:
http://www.horizonhobby.com/content/support-render-compliance. Instructions for Disposal of WEEE by Users in the European Union This product must not be disposed of with other waste. Instead, it is the usersresponsibility to dispose of their waste equipment by handing it over to adesignated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in amanner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or where you purchased the product. 1. Trennen Sie den Flugakku von ihrem Quad-Copter. 2. Whlen Sie einen neuen Modellspeicher fr Ihren Sender (Nur Computersender) 3. Whlen Sie ein Acro oder Flugzeugmodelltyp auf Ihrem Sender. 4. Stellen Sie bitte sicher dass alle Servoreverseeinstellungen auf -Normal- stehen. 5. Stellen Sie alle Trimmungen auf Neutral 6. Schalten Sie den Sender aus und schalten alle Schalter auf die 0 Position. Stellen Sie den Gashebel in die niedrigste Motor Aus Position. 7. Schlieen Sie den Flugakku an den Quad-Copter an. Die blaue LED auf der 4-in-1 Einheit blinkt nach 5 Sekunden. 8. Bringen Sie den Sender in den Bindemode whrend Sie ihn einschalten. 9. Lassen Sie den Bindeschalter nach 2 -3 Sekunden los. Der Quad-Copter ist gebunden wenn die blaue LED auf der 4-in-1 Einheit leuchtet. 10. Trennen Sie den Flugakku und schalten den Sender aus. WICHTIG: Fr folgende Flge schalten Sie den Sender 5 Sekunden bevor sie den Flugakku anschlieen ein. Wenn Probleme auftreten beachten Sie bitte die Bindeanweisungen und schauen in die Hilfestellung zur Problemlsung. Kontaktieren Sie falls notwendig den technischen Service von Horizon Hobby. Auswahl Flugmodus und Dual Rate RTF Der Nano QX in der RTF Version wird mit dem MLP4DSM Sender geliefert. Dieser erlaubt den Wechsel der Flugmodi zwischen dem Stabilittsmodus und dem Agilittsmodus. Wenn Sie den Sender einschalten, befindet sich dieser immer im Stabilittsmodus und Dual Rate ist in Max Sie knnen den Modus durch Drcken des linken Steuerknppels (von oben) und das Dual Rate durch Drcken des rechten Steuerknppels ndern. Dual Rate in MIN Modus fhrt dazu, dass die Ausschlge nicht den vollen Wert erreichen knnen. Diese Einstellung wird Piloten empfohlen, die ein sanfteres Flugverhalten wnschen. Bei Dual Rate in Max werden die maximalen Steuerausschlge zur Verfgung gestellt. Dieser Modus wird in der Regel den erfahrenen Piloten empfohlen, die Wert auf maximale Agilitt des Modells legen. Der Stabilittsmodus wird durch das Dauerleuchten der blauen LED angezeigt. Im Stabilittsmodus werden der Roll- und Nickwinkel begrenzt. Zudem geht das Modell automatisch in den Schwebeflug ber, wenn Sie den Steuerknppel fr die Rollfunktion loslassen. Dies ist der Modus fr Anfnger. Der Agilittsmodus wird durch das Leuchten der roten LED angezeigt. Dieser Modus ist fr den erfahrenen Piloten, der Kunstflug machen kann und auf maximale Perfomance Wert legt. Auswahl Flugmodus BnF Die Flugmodi bei einem BnF Modell knnen durch den Kanalschalter des Kanals 6 aus-
gewhlt werden. Das Modell befindet sich im Stabilittsmodus, wenn die LED solide blau leuchtet und im Agilittsmodus, wenn sie solide rot leuchtet. Sheen Sie sich bitte die Tabelle mit den Setups auf der nchsten Seite an. Wartung und Reparatur Muss Ihr Produkt gewartet oder repariert werden, wenden Sie sich entweder an Ihren Fachhndler oder direkt an Horizon. Rcksendungen/Reparaturen werden nur mit einer von Horizon vergebenen RMA Nummer bearbeitet. Diese Nummer erhalten Sie oder ihr Fachhndler vom technischen Service. Mehr Informationen dazu erhalten Sie im Serviceportal unter www. Horizonhobby.de oder telefonisch bei dem technischen Service von Horizon. Packen Sie das Produkt sorgfltig ein. Beachten Sie, dass der Originalkarton in der Regel nicht ausreicht, um beim Versand nicht beschdigt zu werden. Verwenden Sie einen Paketdienstleister mit einer Tracking Funktion und Versicherung, da Horizon bis zur Annahme keine Verantwortung fr den Versand des Produktes bernimmt. Bitte legen Sie dem Produkt einen Kaufbeleg bei, sowie eine ausfhrliche Fehlerbeschreibung und eine Liste aller eingesendeten Einzelkomponenten. Weiterhin bentigen wir die vollstndige Adresse, eine Telefonnummer fr Rckfragen, sowie eine Email Adresse. Garantie und Reparaturen Garantieanfragen werden nur bearbeitet, wenn ein Originalkaufbeleg von einem autorisierten Fachhndler beiliegt, aus dem der Kufer und das Kaufdatum hervorgeht. Sollte sich ein Garantiefall besttigen wird das Produkt repariert oder ersetzt. Diese Entscheidung obliegt einzig Horizon Hobby. 10-2015 Garantie und Service Kontaktinformationen Land des Kauf EU Horizon Hobby Kontaktinformationen Adresse Horizon Technischer Service Horizon Hobby GmbH
+49 (0) 4121 2655 100 service@horizonhobby.eu Hanskampring 9 D 22885 Barsbttel, Germany Rechtliche Informationen fr die Europische Union Horizon LLC erklrt hiermit, dass dieses Produkt konform zu den essentiellen Anforderungen der RED Direktive ist. Eine Kopie der Konformittserklrung ist online unter folgender Adresse verfgbar: http://www.horizonhobby.com/content/support-render-compliance. Entsorgung in der Europischen Union Dieses Produkt darf nicht ber den Hausmll entsorgt werden. Es ist die Verantwortung des Benutzers, dass Produkt an einer registrierten Sammelstelle fr Elektroschrott abzugeben diese Verfahren stellt sicher, dass die Umwelt geschont wird und natrliche Ressourcen nicht ber die Gebhr beansprucht werden. Dadurch wird das Wohlergehen der menschlichen Gemeinschaft geschtzt. Fr weitere Informationen, wo der Elektromll entsorgt werden kann, knnen Sie Ihr Stadtbro oder Ihren lokalen Entsorger kontaktieren. Problemlsung Problem mgliche Ursache Lsung nano QX hat inkonsequentes Flugverhalten und bentigt fr Neutralsstellung extra Trimmung Fluggert wurde nicht auf eine ebene Flche bei der Initialisierung gestellt. Akku liegt nicht richtig im Akkuschacht. Gastrimmung oder Gasknppel zu hoch nano QX reagiert nicht auf Gaseingaben nano QX wurde whrend der Initialisierung bewegt Gaskanal ist reversiert nano QX funktioniert nicht und riecht nach Anschlu des Akkus verbrannt Flugakku ist mit der falschen Polaritt angeschlossen LED auf dem Empfnger blinkt schnell, Quad-Copter reagiert bei Bindung nicht auf Sender LED auf dem Empfnger blinkt schnell, nano QX reagiert nicht auf den Sender (nach dem Binden) Sender war zu nah am Flugzeug whrend des Bindevorganges. Bindeschalter wurde beim Einschalten des Senders nicht gedrckt. Das Fluggert oder der Sender ist zu nahe an einem Metallkrper, einer Strahlungsquelle oder einem anderen Sender. Sie haben weniger als 5 Sekunden gewartet nachdem Sie den Sender eingeschaltet und den Flugakku angeschlossen haben Der nano QX ist an ein anderen Modellspeicher gebunden. (Betrifft nur Sender mit ModelMatch) Ladung des Flugakkus zu gering oder Senderbattereien zu schwach Das Fluggert oder der Sender ist zu nahe an einem Metallkrper, einer Starhlungsquelle oder einem anderen Sender Ziehen Sie den Flugakku ab, stellen Sie die Trimmung auf Neutral und stecken Sie den Akku zur Neuinitialisierung wieder an. Korrigieren Sie die Position im Akkuschacht, so das der Schwerpunkt des Quadcopters in dessen Mitte liegt. Bringen Sie Gashebel und Trimmung auf die niedrigste Einstellung Trennen Sie den Flugakku, initialisieren Sie den Quad Copter neu, dabei darf er nicht bewegt werden Trennen Sie den Flugakku, reveriseren Sie den Gaskanal und schlieen den Akku neu an Ersetzen Sie das 4-in-1 Kontrollboard. Schlieen Sie den Flugakku in richtiger Polaritt an Schalten Sie den Sender aus. Stellen Sie den Sender weiter vom Fluggert weg. Trennen und schlieen Sie den Akku erneut an den Quad-Copter an. Folgen Sie den Bindeanweisungen Schalten Sie den Sender aus und wiederholen Sie den Bindeprozess Versuchen Sie den Vorgang noch einmal an einem anderen Ort Lassen Sie den Sender eingeschaltet. Trennen und schlieen Sie den Flugakku erneut an Whlen Sie auf dem Sender den richtigen Modellspeicher. Trennen und schlieen Sie den Flugakku erneut an Ersetzen oder laden Sie die Akkus Versuchen Sie den Vorgang noch einmal an einem anderen Ort. Garantie und Service Informationen Garantiezeitraum Exklusive Garantie Horizon Hobby LLC (Horizon) garantiert, dass das gekaufte Produkt frei von Material- und Montagefehlern ist. Der Garantiezeitraum entspricht den gesetzlichen Bestimmung des Landes, in dem das Produkt erworben wurde. In Deutschland betrgt der Garantiezeitraum 6 Monate und der Gewhrleistungszeitraum 18 Monate nach dem Garantiezeitraum. Einschrnkungen der Garantie
(a) Die Garantie wird nur dem Erstkufer (Kufer) gewhrt und kann nicht bertragen werden. Der Anspruch des Kufers besteht in der Reparatur oder dem Tausch im Rahmen dieser Garantie. Die Garantie erstreckt sich ausschlielich auf Produkte, die bei einem autorisierten Horizon Hndler erworben wurden. Verkufe an dritte werden von dieser Garantie nicht gedeckt. Garantieansprche werden nur angenommen, wenn ein gltiger Kaufnachweis erbracht wird. Horizon behlt sich das Recht vor, diese Garantiebestimmungen ohne Ankndigung zu ndern oder modifizieren und widerruft dann bestehende Garantiebestimmungen.
(b) Horizon bernimmt keine Garantie fr die Verkaufbarkeit des Produktes, die Fhigkeiten und die Fitness des Verbrauchers fr einen bestimmten Einsatzzweck des Produktes. Der Kufer allein ist dafr verantwortlich, zu prfen, ob das Produkt seinen Fhigkeiten und dem vorgesehenen Einsatzzweck entspricht.
(c) Ansprche des Kufers Es liegt ausschlielich im Ermessen von Horizon, ob das Produkt, bei dem ein Garantiefall festgestellt wurde, repariert oder ausgetauscht wird. Dies sind die exklusiven Ansprche des Kufers, wenn ein Defekt festgestellt wird. Horizon behlt sich vor, alle eingesetzten Komponenten zu prfen, die in den Garantiefall einbezogen werden knnen. Die Entscheidung zur Reparatur oder zum Austausch liegt nur bei Horizon. Die Garantie schliet kosmetische Defekte oder Defekte, hervorgerufen durch hhere Gewalt, falsche Behandlung des Produktes, falscher Einsatz des Produktes, kommerziellen Einsatz oder Modifikationen irgendwelcher Art aus. Die Garantie schliet Schden, die durch falschen Einbau, falsche Handhabung, Unflle, Betrieb, Service oder Reparaturversuche, die nicht von Horizon ausgefhrt wurden aus. Rcksendungen durch den Kufer direkt an Horizon oder eine seiner Landesvertretung bedrfen der Schriftform. Schadensbeschrnkung Horizon ist nicht fr direkte oder indirekte Folgeschden, Einkommensausflle oder kommerzielle Verluste, die in irgendeinem Zusammenhang mit dem Produkt stehen verantwortlich, unabhngig ab ein Anspruch im Zusammenhang mit einem Vertrag, der Garantie oder der Gewhrleistung erhoben werden. Horizon wird darber hinaus keine Ansprche aus einem Garantiefall akzeptieren, die ber den individuellen Wert des Produktes hinaus gehen. Horizon hat keinen Einfluss auf den Einbau, die Verwendung oder die Wartung des Produktes oder etwaiger Produktkombinationen, die vom Kufer gewhlt werden. Horizon bernimmt keine Garantie und akzeptiert keine Ansprche fr in der folge auftretende Verletzungen oder Beschdigungen. Mit der Verwendung und dem Einbau des Produktes akzeptiert der Kufer alle aufgefhrten Garantiebestimmungen ohne Einschrnkungen und Vorbehalte. Wenn Sie als Kufer nicht bereit sind, diese Bestimmungen im Zusammenhang mit der Benutzung des Produktes zu akzeptieren, werden Sie gebeten, dass Produkt in unbenutztem Zustand in der Originalverpackung vollstndig bei dem Verkufer zurckzugeben. Sicherheitshinweise Dieses ist ein hochwertiges Hobby Produkt und kein Spielzeug. Es muss mit Vorsicht und Umsicht eingesetzt werden und erfordert einige mechanische wie auch mentale Fhigkeiten. Ein Versagen, das Produkt sicher und umsichtig zu betreiben kann zu Verletzungen von Lebewesen und Sachbeschdigungen erheblichen Ausmaes fhren. Dieses Produkt ist nicht fr den Gebrauch durch Kinder ohne die Aufsicht eines Erziehungsberechtigten vorgesehen. Die Anleitung enthlt Sicherheitshinweise und Vorschriften sowie Hinweise fr die Wartung und den Betrieb des Produktes. Es ist unabdingbar, diese Hinweise vor der ersten Inbetriebnahme zu lesen und zu verstehen. Nur so kann der falsche Umgang verhindert und Unflle mit Verletzungen und Beschdigungen vermieden werden. Fragen, Hilfe und Reparaturen Ihr lokaler Fachhndler und die Verkaufstelle knnen eine Garantiebeurteilung ohne Rcksprache mit Horizon nicht durchfhren. Dies gilt auch fr Garantiereparaturen. Deshalb kontaktieren Sie in einem solchen Fall den Hndler, der sich mit Horizon kurz schlieen wird, um eine sachgerechte Entscheidung zu fllen, die Ihnen schnellst mglich hilft. Guide de dpannage Problme Cause possible Solution Guide de Lutilisateur - BLH7601 FR REMARQUE Le nano QX rpond de faon incorrecte ou ncessite lajout de trim pour arrter le mouvement. L'appareil n'a pas t initialis sur une surface niveau La batterie n'est pas correctement place dans son support. Le manche des gaz et/ou le trim est galement trop haut. La totalit des instructions, garanties et autres documents est sujette modification la seule discrtion dHorizon Hobby, LLC. Pour obtenir la documentation jour, rendez-vous sur le site www.horizonhobby.com et cliquez sur longlet de support de ce produit. Le nano QX ne rpond pas aux gaz. Le nano QX t dplac durant linitialisation. Signification de certains termes spcifiques Les termes suivants sont utiliss dans lensemble du manuel pour indiquer diffrents niveaux de danger lors de lutilisation de ce produit:
AVERTISSEMENT: procdures qui, si elles ne sont pas suivies correctement, peuvent entraner des dgts matriels et des blessures graves OU engendrer une probabilit leve de blessure superficielle. ATTENTION: procdures qui, si elles ne sont pas suivies correctement, peuvent entraner des dgts matriels ET des blessures graves. REMARQUE: procdures qui, si elles ne sont pas suivies correctement, peuvent entraner des dgts matriels ET potentiellement un risque faible de blessures. AVERTISSEMENT: lisez la TOTALIT du manuel dutilisation afin de vous familiariser avec les caractristiques du produit avant de le faire fonctionner. Une utilisation incorrecte du produit peut entraner lendommagement du produit lui-mme, ainsi que des risques de dgts matriels, voire de blessures graves. Ceci est un produit de loisirs sophistiqu. Il doit tre manipul avec prudence et bon sens et requiert des aptitudes de base en mcanique. Toute utilisation de ce produit ne respectant pas les principes de scurit et de responsabilit peut entraner des dgts matriels, endommager le produit et provoquer des blessures. Ce produit nest pas destin tre utilis par des enfants sans la surveillance directe dun adulte. Nessayez pas de dmonter le produit, de lutiliser avec des composants incompatibles ou den amliorer les performances sans laccord dHorizon Hobby, LLC. Ce manuel comporte des instructions relatives la scurit, au fonctionnement et lentretien. Il est capital de lire et de respecter toutes les instructions et tous les avertissements du manuel avant lassemblage, le rglage ou lutilisation afin de manipuler correctement lappareil et dviter tout dgt matriel ainsi que toute blessure grave. 14 ans et plus. Ceci nest pas un jouet. Spcifications Le nano QX ne fonctionne pas et dgage une odeur de brl aprs avoir branch la batterie. La DEL du module clignote rapidement et lappareil ne rpond pas aux commandes.
(durant laffectation). La frquence Tension dentre / sortie La catgorie 2404-2476 MHz 3.0-4.2V Rcepteur Ultra Micro platine lectronique 4 en 1
(Rcepteur, ESC, mixer, gyro) La DEL du module clignote rapidement et lappareil ne rpond pas aux commandes
(aprs laffectation). Dconnectez la batterie, replacez les trims au neutre et rinitialisez le quadcoptre. Placez la batterie de faon obtenir l'quilibre au centre de son chssis. Baissez le manche des gaz et placez le trim la valeur la plus basse. Dbranchez, puis rebranchez la batterie afin dinitialiser le nano QX en prenant soin de ne pas le dplacer durant cette opration. Dbranchez la batterie, inversez la voie des gaz, puis rebranchez la batterie. La voie des gaz est inverse. La polarit de la batterie na pas t respecte. Remplacez le module 4en1. Branchez la batterie en respectant la polarit. Lmetteur est trop prs de lappareil durant laffectation. Le bouton ou l'interrupteur d'affectation n'a pas t maintenu durant la mise sous tension de l'metteur. L'appareil ou l'metteur se trouve trop proche d'un grand objet mtallique, d'un rseau sans fil ou d'un autre metteur. Moins de 5 secondes se sont coules entre lallumage de lmetteur et la connexion de la batterie de vol sur le nano QX. Le nano QX est affect une mmoire de modle diffrente (radios ModelMatch uniquement). Charge des batteries de lmetteur trop faible. L'appareil ou l'metteur se trouve trop proche d'un grand objet mtallique, d'un rseau sans fil ou d'un autre metteur. Mettez lmetteur hors tension. Eloignez-le de lappareil. Dbranchez puis rebranchez la batterie. Suivez les instructions daffectation. Mettez l'metteur hors tension et rptez le processus d'affectation. Placez l'avion et l'metteur un autre emplacement et retentez l'affectation. Laissez lmetteur sous tension. Dbranchez puis rebranchez la batterie du nano QX. Slectionnez la mmoire de modle correcte sur lemetteur. Dbranchez puis rebranchez la batterie du nano QX. Remplacez ou chargez les batteries de lemetteur. Placez l'avion et l'metteur un autre emplacement et retentez la connexion. Ports Rcepteurs Port moteur avant gauche Port moteur arrire gauche Installation du Rcepteur Port moteur avant droite Port moteur arrire droite Procdure daffectation 1. Dbranchez la batterie du nano QX. 2. Slectionnez une mmoire libre dans votre metteur (metteur programmable uniquement). 3. Slectionnez avion ou acro en type de modle dans votre metteur. 4. Vrifiez dans votre metteur que tous les servos sont dans le sens de rotation NORMAL. 5. Placez au neutre tous les trims de l'metteur. 6. Mettez lmetteur hors tension et placez tous les interrupteurs sur la position 0. Placez le manche des gaz dans la position la plus basse/gaz coups. 7. Branchez la batterie, la DEL bleue du module 4 en 1 va se mettre clignoter aprs 5 secondes. 8. Mettez votre metteur en mode affectation (Bind). 9. Relchez le bouton/interrupteur Bind aprs 2 ou 3 secondes. Le nano QX est affect quand la DEL bleue devient fixe. 10. Dbranchez la batterie et mettez lmetteur hors tension. IMPORTANT: Pour effectuer les vols suivants, mettez lmetteur sous tension 5 secondes avant de connecter la batterie. Si vous rencontrez des difficults, rfrez-vous au guide de dpannage. Si ncessaire, contactez votre revendeur ou le service technique Horizon Hobby. Slection du mode de vol et des dbattements (RTF) Le nano QX quadcoptre RTF est livr avec un metteur Blade MLP4DSM. Cet metteur permet au pilote de choisir entre le mode stabilit et le mode agilit. Quand l'metteur est mis sous tension, il est automatiquement plac en mode stabilit et en grands dbattements. Changez de mode de vol en pressant puis relchant le manche de gauche quand l'metteur est sous tension. Changez de dbattements en pressant puis relchant le manche de droite. En mode petits dbattements, les commandes ne peuvent atteindre leurs valeurs maximales. Ce mode est le prfr des pilotes qui recherchent des commandes douces pour effectuer les premiers vols. En mode grands dbattements, les commandes peuvent atteindre leurs valeurs maximales. Ce mode est prfr des pilotes expriments qui veulent effectuer des translations rapides et des figures acrobatiques (Boucles, tonneaux, etc.). Le mode stabilit est affich par l'clairage fixe de la DEL bleue du module de contrle. Quand vous volez en mode stabilit, le nano QX a un angle d'inclinaison limit et se remet au neutre quand vous lchez le manche des ailerons et de la profondeur. Ce mode est prfr des pilotes dbutants pour effectuer les premiers vols. Le mode agilit est affich par l'clairage fixe de la DEL rouge du module de contrle. Quand vous volez en mode agilit, le modle ne se remet pas au neutre quand vous lchez les manches. Ce mode est prfr des pilotes expriments qui veulent effectuer des translations rapides et des figures acrobatiques (Boucles, tonneaux, etc.). Slection du mode de vol (BNF) Si vous avez achet votre nano QX en mode BNF, l'interrupteur de la voie 6 de votre metteur permettra la slection des modes de vol. Quand la DEL bleue du module de commande est allume fixement, cela signifie que le mode stabilit est activ. Quand la DEL rouge est allume fixement cela signifie que le quadcoptre est en mode agilit. Consultez le tableau de la page suivante pour des informations de configurations spcifiques. Garantie et rparations Dure de la garantie Garantie exclusive - Horizon Hobby, LLC. (Horizon) garantit que le Produit achet (le Produit
) sera exempt de dfauts matriels et de fabrication sa date dachat par lAcheteur. La dure de garantie correspond aux dispositions lgales du pays dans lequel le produit a t acquis. La dure de garantie est de 6 mois et la dure dobligation de garantie de 18 mois lexpiration de la priode de garantie. Limitations de la garantie
(a) La garantie est donne lacheteur initial ( Acheteur ) et nest pas transfrable. Le recours de lacheteur consiste en la rparation ou en lchange dans le cadre de cette garantie. La garantie sapplique uniquement aux produits achets chez un revendeur Horizon agr. Les ventes faites des tiers ne sont pas couvertes par cette garantie. Les revendications en garantie seront acceptes sur fourniture dune preuve dachat valide uniquement. Horizon se rserve le droit de modifier les dispositions de la prsente garantie sans avis pralable et rvoque alors les dispositions de garantie existantes.
(b) Horizon nendosse aucune garantie quant la vendabilit du produit ou aux capacits et la forme physique de lutilisateur pour une utilisation donne du produit. Il est de la seule responsabilit de lacheteur de vrifier si le produit correspond ses capacits et lutilisation prvue.
(c) Recours de lacheteur Il est de la seule discrtion dHorizon de dterminer si un produit prsentant un cas de garantie sera rpar ou chang. Ce sont l les recours exclusifs de lacheteur lorsquun dfaut est constat. Horizon se rserve la possibilit de vrifier tous les lments utiliss et susceptibles dtre intgrs dans le cas de garantie. La dcision de rparer ou de remplacer le produit est du seul ressort dHorizon. La garantie exclut les dfauts esthtiques ou les dfauts provoqus par des cas de force majeure, une manipulation incorrecte du produit, une utilisation incorrecte ou commerciale de ce dernier ou encore des modifications de quelque nature quelles soient. La garantie ne couvre pas les dgts rsultant dun montage ou dune manipulation errons, daccidents ou encore du fonctionnement ainsi que des tentatives dentretien ou de rparation non effectues par Horizon. Les retours effectus par le fait de lacheteur directement Horizon ou lune de ses reprsentations nationales requirent une confirmation crite. Limitation des dgts Horizon ne saurait tre tenu pour responsable de dommages consquents directs ou indirects, de pertes de revenus ou de pertes commerciales, lis de quelque manire que ce soit au produit et ce, indpendamment du fait quun recours puisse tre formul en relation avec un contrat, la garantie ou lobligation de garantie. Par ailleurs, Horizon nacceptera pas de recours issus dun cas de garantie lorsque ces recours dpassent la valeur unitaire du produit. Horizon nexerce aucune influence sur le montage, lutilisation ou la maintenance du produit ou sur dventuelles combinaisons de produits choisies par lacheteur. Horizon ne prend en compte aucune garantie et naccepte aucun recours pour les blessures ou les dommages pouvant en rsulter. En utilisant et en montant le produit, lacheteur accepte sans restriction ni rserve toutes les dispositions relatives la garantie figurant dans le prsent document. Si vous ntes pas prt, en tant quacheteur, accepter ces dispositions en relation avec lutilisation du produit, nous vous demandons de restituer au vendeur le produit complet, non utilis et dans son emballage dorigine. Indications relatives la scurit Ceci est un produit de loisirs perfectionn et non un jouet. Il doit tre utilis avec prcaution et bon sens et ncessite quelques aptitudes mcaniques ainsi que mentales. Lincapacit utiliser le produit de manire sre et raisonnable peut provoquer des blessures et des dgts matriels consquents. Ce produit nest pas destin tre utilis par des enfants sans la surveillance par un tuteur. La notice dutilisation contient des indications relatives la scurit ainsi que des indications concernant la maintenance et le fonctionnement du produit. Il est absolument indispensable de lire et de comprendre ces indications avant la premire mise en service. Cest uniquement ainsi quil sera possible dviter une manipulation errone et des accidents entranant des blessures et des dgts. Questions, assistance et rparations Votre revendeur spcialis local et le point de vente ne peuvent effectuer une estimation dligibilit lapplication de la garantie sans avoir consult Horizon. Cela vaut galement pour les rparations sous garantie. Vous voudrez bien, dans un tel cas, contacter le revendeur qui conviendra avec Horizon dune dcision approprie, destine vous aider le plus rapidement possible. Maintenance et rparation Si votre produit doit faire lobjet dune maintenance ou dune rparation, adressez-vous soit votre revendeur spcialis, soit directement Horizon. Emballez le produit soigneusement. Veuillez noter que le carton demballage dorigine ne suffit pas, en rgle gnrale, protger le produit des dgts pouvant survenir pendant le transport. Faites appel un service de messagerie proposant une fonction de suivi et une assurance, puisque Horizon ne prend aucune responsabilit pour lexpdition du produit jusqu sa rception accepte. Veuillez joindre une preuve dachat, une description dtaille des dfauts ainsi quune liste de tous les lments distincts envoys. Nous avons de plus besoin dune adresse complte, dun numro de tlphone (pour demander des renseignements) et dune adresse de courriel. Garantie et rparations Les demandes en garantie seront uniquement traites en prsence dune preuve dachat originale manant dun revendeur spcialis agr, sur laquelle figurent le nom de lacheteur ainsi que la date dachat. Si le cas de garantie est confirm, le produit sera rpar Cette dcision relve uniquement de Horizon Hobby. Rparations payantes En cas de rparation payante, nous tablissons un devis que nous transmettons votre revendeur. La rparation sera seulement effectue aprs que nous ayons reu la confirmation du revendeur. Le prix de la rparation devra tre acquitt au revendeur. Pour les rparations payantes, nous facturons au minimum 30 minutes de travail en atelier ainsi que les frais de rexpdition. En labsence dun accord pour la rparation dans un dlai de 90 jours, nous nous rservons la possibilit de dtruire le produit ou de lutiliser autrement. ATTENTION: Nous neffectuons de rparations payantes que pour les composants lectroniques et les moteurs. Les rparations touchant la mcanique, en particulier celles des hlicoptres et des voitures radiocommandes, sont extrmement coteuses et doivent par consquent tre effectues par lacheteur lui-mme. 5-14-2015 Coordonnes de Garantie et rparations Pays dachat Horizon Hobby Numro de tlphone/E-mail Adresse Horizon Technischer Service Sales: Horizon Hobby GmbH sales@horizonhobby.eu
+49 (0) 4121 2655 100 Hanskampring 9 D 22885 Barsbttel, Germany Union europenne Information IC IC: 6157A-BLH7601 Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den comprom-
ettre le fonctionnement. Informations de conformit pour lUnion europenne Dclaration de conformit de lUnion europenne : Horizon Hobby, LLC dclare par la prsente que ce produit est en conformit avec les exigences essentielles et les autres dispositions dela RED Directive. Une copie de la dclaration de conformit europenne est disponible :
http://www.horizonhobby.com/content/support-render-compliance. Instructions relatives llimination des D3E pour les utilisateurs rsidant dans lUnion europenne Ce produit ne doit pas tre limin avec les ordures mnagres. Il est de la responsabilit de lutilisateur de remettre le produit un point de collecte officiel des dchets dquipements lectriques. Cette procdure permet de garantir le respect de lenvironnement et labsence de sollicitation excessive des ressources naturelles. Elle protge de plus le bien-tre de la communaut humaine. Pour plus dinformations quant aux lieux dliminations des dchets dquipements lectriques, vous pouvez contacter votre mairie ou le service local de traitement des ordures mnagres. BLH7601 Guidea Dellutente IT AVVISO Tutte le istruzioni, le garanzie e gli altri documenti pertinenti sono soggetti a cambiamenti a totale discrezione di Horizon Hobby, LLC. Per una documentazione aggiornata sul prodotto, visitare il sito horizonhobby.com e fare clic sulla sezione Support del prodotto. Convenzioni terminologiche Nella documentazione relativa al prodotto vengono utilizzati i seguenti termini per indicare i vari livelli di pericolo potenziale durante luso del prodotto:
AVVERTENZA: indica procedure che, se non debitamente seguite, determinano il rischio di danni alle cose, danni collaterali e gravi lesioni alle persone O il rischio elevato di lesioni superficiali alle persone. ATTENZIONE: indica procedure che, se non debitamente seguite, determinano il rischio di danni alle cose E di gravi lesioni alle persone. AVVISO: indica procedure che, se non debitamente seguite, possono determinare il rischio di danni alle cose E il rischio minimo o nullo di lesioni alle persone. AVVERTENZA: leggere TUTTO il manuale di istruzioni e familiarizzare con le caratteristiche del prodotto prima di farlo funzionare. Luso improprio del prodotto pu causare danni al prodotto stesso e ad altre cose e gravi lesioni alle persone. Questa ricevente un prodotto sofisticato per appassionati di modellismo. Deve essere utilizzato in modo attento e responsabile e richiede alcune conoscenze basilari di meccanica. Luso improprio o irresponsabile di questo prodotto pu causare lesioni alle persone e danni al prodotto stesso o a propriet. Questo prodotto non deve essere utilizzato dai bambini senza la diretta supervisione di un adulto. Non tentare mai di smontare, utilizzare componenti incompatibili o modificare il prodotto senza previa approvazione di Horizon Hobby, LLC. Questo manuale contiene le istruzioni per la sicurezza, luso e la manutenzione del prodotto. fondamentale leggere e seguire tutte le istruzioni e le avvertenze del manuale prima di montare, impostare o utilizzare il prodotto per poterlo utilizzare correttamente ed evitare di causare danni alle cose o gravi lesioni alle persone. Almeno 14 anni. Non un giocattolo. Specifiche Frequenza Tensione di ingresso / uscita Genere 2404-2476 MHz 3.0-4.2V Ricevitore Ultra Micro il gruppo 4-in-1
(Ricevitore, ESC, miscelatore, giroscopio) Porte del ricevitore Porta motore anteriore sinistra Porta motore posteriore sinistra Installazione del ricevitore Porta motore anteriore destra Porta motore posteriore destra Procedura di connessione 1. Scollegare la batteria dal Quad-Copter. 2. Scegliere una memoria libera sul trasmettitore (solo modelli computerizzati). 3. Scegliere laereo come tipo di modello. 4. Controllare che tutti i reverse dei servi siano su normal. 5. Centrare tutti i trim sul trasmettitore. 6. Spegnere il trasmettitore e posizionare tutti gli interruttori sulla posizione 0. Portare lo stick del motore completamente in basso. 7. Collegare la batteria sul Quad-Copter. Il LED blu sullunit di controllo 4-in-1 lampeggia dopo 5 secondi. 8. Mettere il trasmettitore nel modo bind e accenderlo. 9. Rilasciare il pulsante/interruttore di bind dopo 2-3 secondi. Il Quad-Copter connesso quando il LED blu sullunit di controllo resta acceso con luce fissa. 10. Scollegare la batteria dal modello e spegnere il trasmettitore. IMPORTANTE: Per i voli successivi, accendere il trasmettitore 5 secondi prima di collegare la batteria di bordo. Se si incontrassero problemi, osservare le istruzioni per il binding e far riferimento alla guida per la soluzione dei problemi per ulteriori istruzioni. Scelta della modalit di volo e della corsa (RTF) Il modello nano QX RTF viene fornito con il trasmettitore MLP4DSM. La scelta di modalit con questo trasmettitore permette di passare da "stability" ad "agility". Quando si accende, il trasmettitore si trova in modalit "stability" e con corse massime. Per cambiare modalit basta premere e rilasciare lo stick di sinistra mentre il trasmettitore acceso. Per cambiare le corse premere e rilasciare lo stick di destra. Nella modalit con le corse ridotte, i controlli non possono raggiungere la loro massima escursione. In genere viene usata per avere delle risposte morbide e un controllo pi facile per i piloti principianti. Nella modalit con le corse massime, i controlli possono raggiungere la loro massima escursione. Viene normalmente preferita dai piloti gi esperti che vogliono eseguire delle manovre acrobatiche. La modalit "stability" viene visualizzata sulla scheda di controllo con il LED lampeggiante in blu. Quando si vola in questa modalit il nano QX limita l'angolo di rollio anche con i comandi al massimo livellando subito il velivolo appena si rilascia il comando. Viene preferita dai piloti principianti durante i primi voli. La modalit "agility" viene visualizzata sulla scheda di controllo con il LED fisso in rosso. Quando si vola in questa modalit, il modello non ritorna in posizione livellata quando si rilascia il comando. Viene preferita dai piloti gi esperti che vogliono eseguire il volo traslato veloce e l'acrobazia. Scelta della modalit di volo Se si ha un nano QX BNF l'interruttore del canale 6 sul trasmettitore sceglie la modalit di volo. Quando la scheda di controllo del quadricottero ha il LED in blu fisso, vuol dire che in modalit autostabilizzante. Quando il LED rosso fisso si in modalit "agility". Si vedano le tabelle seguenti per maggiori informazioni. Guida alla risoluzione dei problemi Problema Possibile causa Soluzione Velivolo non inizializzato su di una superficie piana. Batteria non inserita bene nella sua sede. Stick e/o trim del motore troppo in alto Lo nano QX si mosso durante linizializzazione Il canale del motore invertito Scollegare la batteria di bordo, centrare il trim e ripetere l'inizializzazione del quadricottero. Regolare la posizione della batteria in modo che il quadricottero sia bilanciato al centro del telaio. Resettare i controlli con stick e trim completamente in basso Scollegare la batteria di bordo e rifare linizializzazione dello nano QX tenendolo ben fermo Scollegare la batteria di bordo, invertire il canale del motore sul trasmettitore e ricollegare la batteria di bordo Batteria di bordo collegata con polarit invertita Sostituire il circuito del 4-in-1. Collegare la batteria di bordo facendo attenzione alla polarit Trasmettitore troppo vicino al modello durante la procedura di binding Il comando per il "bind" non stato premuto all'accensione del trasmettitore. Il modello o il trasmettitore sono troppo vicini a grossi oggetti metallici, sorgenti WiFi o ad un altro trasmettitore. Non sono passati 5 secondi dallaccensione del trasmettitore al collegamento della batteria di bordo Lo nano QX connesso ad una memoria diversa
(solo trasmettitori con ModelMatch) Batteria di bordo o del trasmettitore quasi scariche Il modello o il trasmettitore sono troppo vicini a grossi oggetti metallici, sorgenti WiFi o ad un altro trasmettitore. Spegnere il trasmettitore. Allontanare il trasmettitore allaereo. Scollegare e ricollegare la batteria di bordo. Ripetere la procedura di binding seguendo le istruzioni Spegnere il trasmettitore e ripetere la procedura. Spostare il modello e il trasmettitore in un altro posto prima di ripetere la procedura. Lasciare acceso il trasmettitore. Scollegare e ricollegare la batteria allo nano QX Scegliere la memoria giusta sul trasmettitore. Scollegare e ricollegare la batteria allo nano QX Sostituire o ricaricare le batterie Spostare il modello e il trasmettitore in un altro posto prima di ripetere la procedura. La risposta dello nano QX inconsistente o richiede un extra trim per neutralizzare il movimento Lo nano QX non risponde al comando motore Lo nano QX non funziona e si sente odore di bruciato dopo aver collegato la batteria di bordo Il LED sul ricevitore lampeggia velocemente e laereo non risponde al trasmettitore (durante il binding) Il LED sul ricevitore lampeggia velocemente e laereo non risponde al trasmettitore (dopo il binding) Garanzia Periodo di garanzia La garanzia esclusiva - Horizon Hobby, LLC, (Horizon) garantisce che i prodotti acquistati
(il Prodotto) sono privi di difetti relativi ai materiali e di eventuali errori di montaggio. Il periodo di garanzia conforme alle disposizioni legali del paese nel quale il prodotto stato acquistato. Tale periodo di garanzia ammonta a 6 mesi e si estende ad altri 18 mesi dopo tale termine. Limiti della garanzia
(a) La garanzia limitata allacquirente originale (Acquirente) e non cedibile a terzi. Lacquirente ha il diritto a far riparare o a far sostituire la merce durante il periodo di questa garanzia. La garanzia copre solo quei prodotti acquistati presso un rivenditore autorizzato Horizon. Altre transazioni di terze parti non sono coperte da questa garanzia. La prova di acquisto necessaria per far valere il diritto di garanzia. Inoltre, Horizon si riserva il diritto di cambiare o modificare i termini di questa garanzia senza alcun preavviso e di escludere tutte le altre garanzie gi esistenti.
(b) Horizon non si assume alcuna garanzia per la disponibilit del prodotto, per ladeguatezza o lidoneit del prodotto a particolari previsti dallutente. sola responsabilit dellacquirente il fatto di verificare se il prodotto adatto agli scopi da lui previsti.
(c) Richiesta dellacquirente spetta soltanto a Horizon, a propria discrezione riparare o sostituire qualsiasi prodotto considerato difettoso e che rientra nei termini di garanzia. Queste sono le uniche rivalse a cui lacquirente si pu appellare, se un prodotto difettoso. Horizon si riserva il diritto di controllare qualsiasi componente utilizzato che viene coinvolto nella rivalsa di garanzia. Le decisioni relative alla sostituzione o alla riparazione avvengono solo in base alla discrezione di Horizon. Questa garanzia non copre dei danni superficiali o danni per cause di forza maggiore, uso errato del prodotto, negligenza, uso ai fini commerciali, o una qualsiasi modifica a qualsiasi parte del prodotto. Questa garanzia non copre danni dovuti ad una installazione errata, ad un funzionamento errato, ad una manutenzione o un tentativo di riparazione non idonei a cura di soggetti diversi da Horizon. La restituzione del prodotto a cura dellacquirente, o da un suo rappresentante, deve essere approvata per iscritto dalla Horizon. Limiti di danno Horizon non si riterr responsabile per danni speciali, diretti, indiretti o consequenziali;
perdita di profitto o di produzione; perdita commerciale connessa al prodotto, indipendentemente dal fatto che la richiesta si basa su un contratto o sulla garanzia. Inoltre la responsabilit di Horizon non supera mai in nessun caso il prezzo di acquisto del prodotto per il quale si chiede la responsabilit. Horizon non ha alcun controllo sul montaggio, sullutilizzo o sulla manutenzione del prodotto o di combinazioni di vari prodotti. Quindi Horizon non accetta nessuna responsabilit per danni o lesioni derivanti da tali circostanze. Con lutilizzo e il montaggio del prodotto lutente acconsente a tutte le condizioni, limitazioni e riserve di garanzia citate in questa sede. Qualora lutente non fosse pronto ad assumersi tale responsabilit associata alluso del prodotto, si suggerisce di restituire il prodotto intatto, mai usato e immediatamente presso il venditore. Indicazioni di sicurezza Questo un prodotto sofisticato di hobbistica e non un giocattolo. Esso deve essere manipolato con cautela, con giudizio e richiede delle conoscenze basilari di meccanica e delle facolt mentali di base. Se il prodotto non verr manipolato in maniera sicura e responsabile potrebbero risultare delle lesioni, dei gravi danni a persone, al prodotto o allambiente circostante. Questo prodotto non concepito per essere usato dai bambini senza una diretta supervisione di un adulto. Il manuale del prodotto contiene le istruzioni di sicurezza, di funzionamento e di manutenzione del prodotto stesso. fondamentale leggere e seguire tutte le istruzioni e le avvertenze nel manuale prima di mettere in funzione il prodotto. Solo cos si eviter un utilizzo errato e di preverranno incidenti, lesioni o danni. Domande, assistenza e riparazioni Il vostro negozio locale e/o luogo di acquisto non possono fornire garanzie di assistenza o riparazione senza previo colloquio con Horizon. Questo vale anche per le riparazioni in garanzia. Quindi in tale casi bisogna interpellare un rivenditore, che si metter in contatto subito con Horizon per prendere una decisione che vi possa aiutare nel pi breve tempo possibile. Manutenzione e riparazione Se il prodotto deve essere ispezionato o riparato, si prega di rivolgersi ad un rivenditore specializzato o direttamente ad Horizon. Il prodotto deve essere Imballato con cura. Bisogna far notare che i box originali solitamente non sono adatti per effettuare una spedizione senza subire alcun danno. Bisogna effettuare una spedizione via corriere che fornisce una tracciabilit e unassicurazione, in quanto Horizon non si assume alcuna responsabilit in relazione alla spedizione del prodotto. Inserire il prodotto in una busta assieme ad una descrizione dettagliata dei problemi e ad una lista di tutti i singoli componenti spediti. Inoltre abbiamo bisogno di un indirizzo completo, di un numero di telefono per rivolgere ulteriori domande e di un indirizzo e-mail. Garanzia a riparazione Le richieste in garanzia verranno elaborate solo se presente una prova dacquisto in originale proveniente da un rivenditore specializzato autorizzato, nella quale ben visibile la data di acquisto. Se la garanzia viene confermata, allora il prodotto verr riparato o sostituito. Questa decisione spetta esclusivamente a Horizon Hobby. Riparazioni a pagamento Se bisogna effettuare una riparazione a pagamento, effettueremo un preventivo che verr inoltrato al vostro rivenditore. La riparazione verr effettuata dopo lautorizzazione da parte del vostro rivenditore. La somma per la riparazione dovr essere pagata al vostro rivenditore. Le riparazioni a pagamento avranno un costo minimo di 30 minuti di lavoro e in fattura includeranno le spese di restituzione. Qualsiasi riparazione non pagata e non richiesta entro 90 giorni verr considerata abbandonata e verr gestita di conseguenza. ATTENZIONE: Le riparazioni a pagamento sono disponibili solo sullelettronica e sui motori. Le riparazioni a livello meccanico, soprattutto per gli elicotteri e le vetture RC sono molto costose e devono essere effettuate autonomamente dallacquirente. 5-14-2015 Garanzia e Assistenza - Informazioni per i contatti Stato di acquisto Unione Europea Horizon Hobby Telefono/Indirizzo e-mail Indirizzo Horizon Technischer Service Sales: Horizon Hobby GmbH sales@horizonhobby.eu
+49 (0) 4121 2655 100 Hanskampring 9 D 22885 Barsbttel, Germany Dichiarazione di Conformit EU:
Horizon Hobby, LLC con la presente dichiara che il prodotto conforme ai requisiti essenziali e ad altre disposizioni rilevanti della direttiva RED. Una copia della dichiarazione di conformit per lUnione Europea disponibile a: http://www.horizonhobby.com/content/support-render-compliance. Istruzioni del RAEE per lo smaltimento da parte di utenti dellUnione Europea Questo prodotto non deve essere smaltito assieme ai rifiuti domestici. Al contrario, lutente responsabile dello smaltimento di tali rifiuti che devono essere portati in un centro di raccolta designato per il riciclaggio di rifiuti elettrici e apparecchiature elettroniche. La raccolta differenziata e il riciclaggio di tali rifiuti provenienti da apparecchiature nel momento dello smaltimento aiuteranno a preservare le risorse naturali e garantiranno un riciclaggio adatto a proteggere il benessere delluomo e dellambiente. Per maggiori informazioni sui centri di raccolta, contattare il proprio ufficio locale, il servizio di smaltimento rifiuti o il negozio presso il quale stato acquistato il prodotto. 2018 Horizon Hobby, LLC. Blade and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. All other trademarks, service marks and logos are property of their respective owners. US 7,898,130. US D578,146. PRC ZL 200720069025. PRC ZL 2007001249 Created 09/18 BLH7601 59925 IC Radiation Exposure Statement for Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with Industry Canada RSS forth for an uncontrolled environment.
-
102 for radiation exposure limits set Dclarationd'exposition aux radiations:
Cetquipementestconforme aux limitesd'exposition aux rayonnements IC tablies pour un environnement non contrl. Industry Canada Emissions compliance statement This Class B digital apparatus complies with Canadian ICES 003.
-
Ceta ppareilnumrique de la Avis de Conformit la Rglementationd Industrie Canada. classe B est conform la norme NMB
-
003 du Canada.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-10-15 | 2404 ~ 2476 | DXT - Part 15 Low Power Transceiver, Rx Verified | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2018-10-15
|
||||
1 | Applicant's complete, legal business name |
Horizon Hobby, LLC
|
||||
1 | FCC Registration Number (FRN) |
0006301931
|
||||
1 | Physical Address |
2904 Research Rd.
|
||||
1 |
Champaign, Illinois 61821
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
h******@acbcert.com
|
||||
1 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BRW
|
||||
1 | Equipment Product Code |
BLH7601
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
C****** D****
|
||||
1 | Title |
President and EVP Product Management and Marketing
|
||||
1 | Telephone Number |
217-4********
|
||||
1 | Fax Number |
217-4********
|
||||
1 |
c******@horizonhobby.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
MRT Technology (Suzhou) Co., Ltd
|
||||
1 | Name |
R****** W****
|
||||
1 | Physical Address |
D8 Building, Youxin Industrial Park
|
||||
1 |
Suzhou, 215104
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
86-51******** Extension:
|
||||
1 | Fax Number |
86-51********
|
||||
1 |
r******@mrt-cert.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
MRT Technology (Suzhou) Co., Ltd
|
||||
1 | Name |
R******** W****
|
||||
1 | Physical Address |
D8 Building, Youxin Industrial Park
|
||||
1 |
Suzhou, 215104
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
86-51******** Extension:
|
||||
1 | Fax Number |
86-51********
|
||||
1 |
r******@mrt-cert.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXT - Part 15 Low Power Transceiver, Rx Verified | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Receiver | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | When all conditions of this filling cannot be met installation of this device into specific final products may require the submission of a permissive. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
MRT Technology (Suzhou) Co., Ltd.
|
||||
1 | Name |
M****** C******
|
||||
1 | Telephone Number |
+86-5******** Extension:
|
||||
1 |
m******@mrt-cert.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2404.00000000 | 2476.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC