all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users manual | Users Manual | 1.84 MiB | May 10 2017 | |||
1 | Cover Letter(s) | May 10 2017 | ||||||
1 | Cover Letter(s) | May 10 2017 | ||||||
1 | External Photos | May 10 2017 | ||||||
1 | Cover Letter(s) | May 10 2017 | ||||||
1 | Internal Photos | May 10 2017 | ||||||
1 | ID Label/Location Info | May 10 2017 | ||||||
1 | Test Report | May 10 2017 | ||||||
1 | Test Setup Photos | May 10 2017 |
1 | Users manual | Users Manual | 1.84 MiB | May 10 2017 |
SRS4210 | AR636H SRS4200 | SRS4201 INSTRUCTION MANUAL BEDIENUNGSANLEITUNG MANUEL DUTILISATION MANUALE DI ISTRUZIONI EN NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, Inc. For up-to-date product literature, visit horizonhobby.com and click on the support tab for this product. MEANING OF SPECIAL LANGUAGE The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:
WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high probability of superficial injury. CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury. NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no possibility of injury. Age Recommendation: Not for children under 14 years. This is not a toy. WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not in-
tended for use by children without direct adult supervision. Do not attempt disassembly, use with incompatible components or augment product in any way without the approval of Horizon Hobby, Inc. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury. WARNING AGAINST COUNTERFEIT PRODUCTS Always purchase from a Horizon Hobby, Inc. authorized dealer to ensure authentic high-quality Spektrum product. Horizon Hobby, Inc. disclaims all support and warranty with regards, but not limited to, compatibility and performance of counterfeit products or products claiming compatibility with DSM or Spektrum. NOTICE: This product is only intended for use with unmanned, hobby-grade, remote-controlled vehicles and aircraft. Horizon Hobby disclaims all liability outside of the intended purpose and will not provide warranty service related thereto. Warranty Registration Visit www.spektrumrc.com/registration today to register your product. 2 EN WATERPROOF COMPONENT Your new Spektrum receiver has been designed and built to allow you to operate your vehicle in many wet conditions, including puddles, creeks, wet grass, snow and even rain. While waterproof, this component has not been designed to be immersed in water for long periods of time and should NOT be treated like a submarine. In addition, most metal parts, including any screws and nuts, as well as the contacts in the electrical cables, will be susceptible to corrosion if additional maintenance is not performed after running in wet conditions. To maximize the long-term performance of your receiver and to keep the warranty intact, it should only be used as described in the Usage Conditions section of this manual. Additionally, the procedures described in the Wet Conditions Maintenance section must be performed regularly if you choose to run in wet conditions. If you are not willing to perform the additional care and maintenance required, then you should not operate your vehicle in those conditions. CAUTION: Failure to exercise caution while using this product and comply with the following precautions could result in product malfunction and/or void the warranty. General Precautions Read through the wet conditions maintenance procedures and make sure that you have all the tools you will need to properly maintain your receiver. Do not operate your receiver where it could come in contact with salt water
(ocean water or water on salt-covered roads), contaminated or polluted water. Salt water is very conductive and highly corrosive, so use caution. Usage Conditions Your receiver will operate successfully in any of the following, individual-usage scenarios:
2 hours continuous operation in dew-covered (damp) grass or vegetation. 2 hours continuous operation in heavy fog (95% humidity, saturated air, condensing water). 1 hour continuous operation in light rain (< 0.10 in / 2.5mm per hour). 15 minutes continuous operation in heavy rain (> 0.30 in / 7.6mm per hour). 1 hour continuous operation in light sleet (< 0.10 in / 2.5mm per hour). 1 hour continuous operation in light snow (< 0.25 in / 6.35mm per hour). 45 minutes continuous operation in standing or running fresh water (the water level should always remain below the vehicle frame), or constant splashing water, without any immersion of waterproof component(s). 3 EN 5 minutes continuous operation in standing or running fresh water (the water level should never rise higher than 0.5 in (about 10 mm) above the vehicle frame), constant splashing water, or frequent, intermittent immersion of waterproof component(s). 1 hour continuous operation in damp sand, dirt, mud or snow (the material level should always be below the vehicle frame), constant splatter without any immersion or coverage of waterproof component(s). Furthermore, when appropriate maintenance procedures (as described below) are performed promptly following exposure, the receiver will remain best protected from corrosion or other long-term, water-related damage. Wet Conditions Maintenance Gently rinse the mud and dirt off the vehicle with a garden hose. Remove the battery pack(s) and dry the contacts. If you have an air compressor or a can of compressed air available, blow off the receiver to help remove any water that may have gotten into small crevices or corners. Dry any water that may be inside a recessed connector housing. Let the receiver air dry before you store it. Water may continue to seep or evaporate out of tight areas for a few hours. NOTICE: Never use a pressure washer to clean your vehicle. NOTICE: The receiver is waterproofed for use in wet conditions. Make sure the other components in your vehicle are waterproof or water-resistant before driving in wet conditions. AVC ACTIVE VEHICLE CONTROL AVC technology is the newest Spektrum RC innovation from Horizon Hobby. This Spektrum stabilization system adds a whole new level of control to your RC driving experience. AVC technology utilizes sensors to adjust steering and throttle output, providing you with a more stable and controlled driving experience. NOTICE: You must use digital servos with the SR4210 receiver. Using analog servos will reduce the performance of the system and may cause analog servos to overheat. 4 SRS4210 INSTRUCTION MANUAL The Spektrum SRS4210 DSMR Surface receiver is compatible with all Spektrum DSMR transmitters and is also backwards compatible with DSM2 transmitters. The SRS4210 receiver is NOT compatible with DSM transmitters. For a complete list of compatible transmitters, see the SRS4210 product page on spektrumrc.com. Specifications Type: DSMR Dimensions (LxWxH):
1.43 x 0.96 x 0.51 in
(36.3 x 24.4 x 13.0mm) Channels:
2, 4 with AVC disabled Weight: 10.9 g (0.39 oz) Band: 2.4GHz Voltage Range:
3.59.6V Antenna Bind/Battery Port Disable Port Data Port Aux 2 Port Aux 1 Port Throttle Port Steering Port Aux channels The Aux channels can operate as additional servo channels, or as a power supply for a personal transponder. If AVC is active, only two channels, Steering and Throttle, are operational. The Aux channels can be used to power a personal transponder or lights. If AVC is disabled (see DISABLING THE STABILITY ASSIST FUNCTION to disable AVC), the Aux channels will operate as servo channels. EN 5 EN Receiver Connection and Installation You must install the receiver in the vehicle before binding the transmitter and receiver. The receiver can be mounted flat with the label up or on its side. When you bind the receiver, the AVC system automatically detects the orientation of the receiver. The receiver must be mounted completely flat when in the label-up orientation or completely perpendicular when mounted on its side. If the receiver is angled even slightly, AVC may not function properly. If the orientation of the receiver is changed after binding, you must then rebind for AVC to fuction properly. Install the Receiver in your vehicle using the included double-sided foam servo tape. Foam servo tape will hold the receiver in place and help isolate it from vibrations. IMPORTANT: Do not use hook & loop material to install the SRS4210 receiver. Using hook & loop material will affect the performance of the AVC system. Mount the antenna up and away from the vehicle in an antenna tube. The higher up the antenna is, the better signal it will receive. NOTICE: Do not cut or modify the antenna. Failsafe In the unlikely event that the radio link is lost during use, the receiver will drive the throttle channel to the neutral position. If the receiver is powered on prior to turning on the transmitter, the receiver will enter the failsafe mode, driving the throttle channel to the neutral position. When the transmitter is turned on, normal control is resumed. IMPORTANT: Failsafe activates only in the event that signal is lost from the transmitter. Failsafe will NOT activate in the event that receiver battery power decreases below the recommended minimums or power to the receiver is lost. 6 Powering the receiver with a separate receiver pack EN Battery Throttle Servo Receiver Steering Servo Powering the receiver with an ESC Battery Electronic Speed Control Receiver To Motor Steering Servo IMPORTANT: If you adjust the steering and throttle trim on your transmitter, the receiver must be turned off and back on again in order to save the new trim settings. Otherwise, AVC will not function properly. 7 EN Binding Receiver to Transmitter In order to operate, the receiver must be bound to the transmitter. Binding is the process of programming the receiver to recognize the GUID (Globally Unique Identifier) code of a single specific transmitter. When areceiver is bound to atransmitter/model memory, the receiver will only respond to that specific transmitter/model memory. Binding and Calibrating the Receiver You must calibrate the receiver each time it is placed in bind mode. IMPORTANT: The following sequence of steps must be followed in order for AVC to function properly. 1. 2. Power on the receiver. The orange LED flashes, indicating the receiver Insert the Bind Plug in the BIND port on the receiver. is in bind mode. 3. Center the ST TRIM and TH TRIM on the transmitter. 4. Put your transmitter in bind mode. 5. The bind process is complete when the orange LED on the receiver is solid. 6. Pull the transmitter trigger to Full Throttle. 7. Push the transmitter trigger to Full Brake, then return the trigger to center. 8. Turn the transmitter steering wheel to Full Right. 9. Turn the transmitter steering wheel to Full Left, then return the steering wheel to center. The orange LED flashes once. 10. Remove the bind plug once the calibration and binding process is complete. 11. Power off the transmitter. IMPORTANT: You must rebind the transmitter and receiver if you:
Change the servo reverse after binding Change the travel after binding Want to use the receiver with a different model memory If you change the servo reversing or travel adjust after binding, AVC will not work properly. Disabling the Stability Assist Function If you participate in organized racing, you may be required to turn AVC technology off. To turn off AVC technology, insert a second Bind Plug in the Disable port before binding. IMPORTANT: You must calibrate the receiver each time it is placed in bind mode. To activate AVC, see the steps in BINDING AND CALIBRATING THE RECEIVER. 8 2.4GHZ TROUBLESHOOTING GUIDE Problem The system will not connect Possible Cause Your transmitter and receiver are too close together You are around metal objects Solution Move transmitter 1 to 3 meters from receiver Move to an area with less metal The receiver is not bound to the active model memory Check model selected and ensure you are bound to that model Your transmitter was accidentally put into bind mode and is no longer bound to your receiver Check the receiver antenna to be sure it is not cut or damaged Inadequate battery voltage The receiver goes into fail-
safe mode a short distance away from the transmitter The receiver stops respond-
ing during operation Rebind your transmitter and receiver Replace the receiver or contact Horizon Product Support Make sure your receiver antenna is in an antenna tube and is above the vehicle Charge or replace the receiver batteries. Spektrum receivers require at least 3.5V to operate
(We recommend using a 6V receiver pack). An inadequate power supply can allow voltage to momentarily drop below 3.5V and cause the receiver to brown out and reconnect Loose or damaged wires or connectors between battery and receiver Check the wires and connection between the battery and receiver. Repair or replace wires and/or connectors The front wheels oscillate The steering gain is set too high Turn down the steering gain The front wheels turn the wrong way when the car slides/
rotates The throttle does not reduce when the car slides/rotates The steering channel was reversed after calibration Rebind and calibrate The throttle channel was reversed after calibration Rebind and calibrate EN 9 EN EN 1-YEAR LIMITED WARRANTY What this Warranty Covers Horizon Hobby, Inc., (Horizon) warrants to the original purchaser that the product purchased (the Product) will be free from defects in materials and workmanship for a period of 1 years from the date of purchase. What is Not Covered This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modification of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer, or (vi) Product not compliant with applicable technical regulations. OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASERS INTENDED USE. Purchasers Remedy Horizons sole obligation and purchasers sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASERS SOLE AND EXCLUSIVE REMEDY. Limitation of Liability HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase. Law These terms are governed by Illinois law (without regard to conflict of law principals).This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice. 10 EN WARRANTY SERVICES Questions, Assistance, and Services Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call the toll free telephone number referenced in the Warranty and Service Contact Information section to speak with a Product Support representative. Inspection or Services If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://
www.horizonhobby.com/content/service-center_render-service-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton. NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery, please contact the appropriate Horizon Product Support office. Warranty Requirements For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon. Non-Warranty Service Should your service not be covered by warranty, service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of hour of labor. In addition you will be billed for return freight. Horizon accepts 11 EN EN money orders and cashiers checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizons Terms and Conditions found on our website http://
www.horizonhobby.com/content/service-center_render-service-center. ATTENTION: Horizon service is limited to Product compliant in the country of use and ownership. If received, a non-compliant Product will not be serviced. Further, the sender will be responsible for arranging return shipment of the un-serviced Product, through a carrier of the senders choice and at the senders expense. Horizon will hold non-compliant Product for a period of 60 days from notification, after which it will be discarded. Warranty and Service Contact Information Country of Purchase Horizon Hobby Contact Information Address Horizon Service Center
(Repairs and Repair Requests) United States of America Horizon Product Support
(Product Technical Assistance) Sales Horizon Technischer Service EU servicecenter.horizonhobby.com/
RequestForm/
productsupport@horizonhobby.com 877-504-0233 websales@horizonhobby.com 800-338-4639 service@horizonhobby.eu Sales: Horizon Hobby GmbH
+49 (0) 4121 2655 100 4105 Fieldstone Rd Champaign, Illinois, 61822 USA Hanskampring 9 D 22885 Barsbttel, Germany FCC Statement This equipment has been tested and found to comply with the limits for Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment to an outlet on a circuit different from that to which Increase the separation between the equipment and receiver. the receiver is connected. 12 EN This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Modifications to this product will void the users authority to operate this equipment. IC Statement Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Antenna Separation Distance When operating your transmitter, please be sure to maintain a separation distance of at least 20 cm between your body (excluding fingers, hands, wrists, ankles and feet) and the antenna to meet RF exposure safety requirements as determined by FCC regulations. This illustration shows the approximate 20 cm RF exposure area and typical hand placement when operating your transmitter. 20 cm COMPLIANCE INFORMATION FOR THE EUROPEAN UNION EU Compliance Statement: Horizon Hobby, LLC hereby declares that this product is in compliance with the essential requirements and other relevant provisions of the RED directive. A copy of the EU Declaration of Conformity is available online at:
http://www.horizonhobby.com/content/support-render-compliance. Instructions for disposal of WEEE by users in the European Union This product must not be disposed of with other waste. Instead, it is the users responsibility to dispose of their waste equipment by handing it over to a designated collections point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equip-
ment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or where you purchased the product. 13 DE HINWEIS Alle Anweisungen, Garantien und anderen zugehrigen Dokumente knnen im eigenen Ermessen von Horizon Hobby, Inc. jederzeit gendert werden. Die aktuelle Produktliteratur finden Sie auf horizonhobby.com unter der Registerkarte Support fr das betreffende Produkt. SPEZIELLE BEDEUTUNGEN Die folgenden Begriffe werden in der gesamten Produktliteratur verwendet, um auf unterschiedlich hohe Gefahrenrisiken beim Betrieb dieses Produkts hinzuweisen:
WARNUNG: Wenn diese Verfahren nicht korrekt befolgt werden, ergeben sich wahrscheinlich Sachschden, Kollateralschden und schwere Verletzungen ODER mit hoher Wahrscheinlichkeit oberflchliche Verletzungen. ACHTUNG: Wenn diese Verfahren nicht korrekt befolgt werden, ergeben sich wahrscheinlich Sachschden UND die Gefahr von schweren Verletzungen. HINWEIS: Wenn diese Verfahren nicht korrekt befolgt werden, knnen sich mglicherweise Sachschden UND eine geringe oder keine Gefahr von Verletzungen ergeben. Nicht geeignet fr Kinder unter 14 Jahren. Dies ist kein Spielzeug. WARNUNG: Lesen Sie die GESAMTE Bedienungsanleitung durch, um sich vor der Inbetriebnahme mit den Funktionen des Produkts vertraut zu machen. Wird dieses Produkt nicht korrekt betrieben, kann dies zu Schden am Produkt oder anderen Sachschden und zu schweren Verletzungen fhren. Dies ist ein hochentwickeltes Hobbyprodukt und KEIN Spielzeug. Es muss mit Vorsicht und gesundem Menschenverstand betrieben werden und erfordert gewisse technische Grundfhigkeiten. Wird dieses Produkt nicht auf eine sichere und verantwortungsvolle Weise betrieben, kann dies zu Verletzungen oder Schden am Produkt oder anderen Sachwerten fhren. Dieses Produkt eignet sich nicht fr die Verwendung durch Kinder ohne direkte berwachung eines Erwachsenen. Versuchen Sie nicht ohne Genehmigung durch Horizon Hobby, Inc., das Produkt zu zerlegen, es mit inkompatiblen Komponenten zu verwenden oder auf jegliche Weise zu erweitern. Diese Bedienungsanleitung enthlt Anweisungen fr Sicherheit, Betrieb und Wartung. Es ist unbedingt notwendig, vor Zusammenbau, Einrichtung oder Verwendung alle Anweisungen und Warnhinweise im Handbuch zu lesen und zu befolgen, damit das Produkt bestimmungsgem betrieben werden kann und Schden oder schwere Verletzungen vermieden werden. WARNUNG ZU GEFLSCHTEN PRODUKTEN Bitte kaufen Sie Ihre Spektrum Produkte immer von einem autorisiertem Hndler um sicherzu stellen, dass Sie ein authentisches hochqualitatives original Spektrum Produkt gekauft haben. Horizon Hobby lehnt jede Untersttzung, Service oder Garantieleistung von geflschten Produkten oder Produkten ab die von sich in Anspruch nehmen kompatibel mit Spektrum oder DSM zu sein. 14 DE HINWEIS: Dieses Produkt ist ausschlielich fr die Verwendung inunbemanten, ferngesteuerten Fahrzeugen und Fluggerten im Hobbybereich vorgese-hen. Horizon Hobby lehnt jede Haftung und Garantieleistung ausserhalb der vorgesehen Verwendung ab. Garantie Registrierung Registrieren Sie bitte Ihr Produkt unter www.spektrumrc.com/registration. WASSERFESTE KOMPONENTE Ihr neuer Spektrum Empfnger wurde entwickelt und gebaut um den Betrieb in feuchten Umgebungen inklusive Pftzen, Bchen, nassem Gras, Schnee oder sogar Regen ermglichen. Bitte beachten Sie, dass auch wenn die Komponente wasserfest ist, diese NICHT dafr geeignet ist, lngere Zeit unter Wasser getaucht zu werden. Zudem sind die elektrischen Kabel sowie auch die meisten Metallteile, inkl. Schrauben und Muttern, korrosionsanfllig, wenn nach dem Betrieb in nasser Umgebung keine zustzliche Wartung durchgefhrt wird. Fr die Maximierung der Langzeitleistung und den Erhalt der Garantie Ihres Empfngers, sollten Sie dieses nur entsprechend der Nutzungsbedingungen einsetzen. Wenn Sie in feuchten Umgebungen fahren, sollten Sie auerdem regelmig die Wartung, wie in der Wartungsanleitung unter Nach Einsatz in nasser Umgebung beschrieben, durchfhren. Wenn Sie diese zustzliche Wartung nicht ausfhren mchten, dann sollten Sie das Produkt auch nicht unter diesen Bedingungen betreiben. ACHTUNG: Unaufmerksamkeit beim Betrieb des Produktes und in Zusammenhang mit den folgenden Sicherheitshinweisen kann zu Fehlfunktionen und dem Verlust der Garantie fhren. Allgemeine Sicherheitshinweise Bitte lesen Sie sich die Wartungsanleitung fr den Einsatz in nasser Umgebung sorgfltig durch und stellen Sie sicher, dass Sie alle Werkzeuge fr eine Wartung des Servos zur Verfgung haben. Betreiben Sie Ihr Servo nicht dort, wo es in Kontakt mit Salzwasser
(Meerwasser oder mit Salz bedeckten Straen) oder mit schmutzigem oder belastetem Wasser kommen kann. Salzwasser ist stark leitend und korrosionsfrdernd, seien Sie daher bitte sehr achtsam. Nutzungsbedingungen Ihr Empfnger kann erfolgreich unter folgenden Bedingungen in einem der folgenden Szenarios eingesetzt werden:
2 Stunden unterbrochener Betrieb in taubedeckten Gras oder Vegetation. 2 Stunden Dauerbetrieb in dichtem Nebel (95% Luftfeuchtigkeit, gesttigte Luft, Kondenswasser). 1 Stunde Dauerbetrieb in leichtem Regen (<2,5mm per Stunde). 15 DE 15 Minuten Dauerbetrieb in starkem Regen (>7,6mm per Stunde). 1 Stunde Dauerbetrieb in leichtem Graupel (<2,5mm per Stunde). 1 Stunde Dauerbetrieb bei leichtem Schneefall (<6,35mm per Stunde). 45 Minuten Dauerbetrieb in Swasser (die Wasserhhe darf dabei nicht die untere Chassiskante bersteigen oder bei kontinuierlichem Kontakt mit Spritzwasser, jedoch ohne Eintauchen der wasserdichten Komponenten. 5 Minuten Dauerbetrieb in Swasser (die Wasserhhe darf die untere Chassiskante um max. 10mm bersteigen), bei kontinuierlichem Kontakt mit Spritzwasser oder bei stndigem kurzen Eintauchen der wasserdichten Komponenten. 1 Stunde unterbrochener Betrieb in Sand, Matsch oder Schnee (die untere Rumpfkante sollte nicht durch den Untergrund berdeckt werden), bei Kontakt mit Spritzwasser, jedoch ohne Eintauchen der wasserfesten Komponenten. Fhren Sie im Anschluss unverzglich die beschriebenen Wartungsmanah-
men durch und das Servo ist bestens gegen Korrosion und andere langfristige Wasserschden geschtzt. Wartung nach Fahrten in nasser Umgebung Nehmen Sie die Akkus aus dem Fahrzeug heraus und trocknen die Kontakte. Entfernen Sie mit einem Gartenschlauch vorsichtig Dreck und Schmutz von Ihrem Fahrzeug. Sollten Sie einen Kompressor oder Druckluft zur Hand haben, blasen Sie die Innenrume, Ritzen und Spalten des Fahrzeuges aus. Trocknen Sie alle Anschlsse und Stecker sorgfltig. Lassen Sie das Fahrzeug an der Luft trocknen bevor Sie ihn einlagern. Wasser kann fr einige Stunden aus dem Fahrzeug heraus tropfen. HINWEIS: Verwenden Sie fr die Reinigung Ihres Fahrzeuges NIEMALS einen Hochdruckreiniger. HINWEIS: Der Empfnger ist wasserfest fr den Einsatz in nasser Umgebung. Stellen Sie sicher, dass andere Komponenten in Ihrem Fahrzeug wasserdicht oder wassergeschtzt sind, bevor Sie in nasser Umgebung fahren. AVC ACTIVE VEHICLE CONTROL Die AVC Technologie ist die neueste Spektrum RC Innovation von Horizon Hobby. Dieses Spektrum Stabilisierungssystem ermglich ein vollkommen neues Level der Fahrzeugbeherrschung. Die AVC Technologie nutzt dazu Sensoren die Gas und Lenkung beeinflussen und fr ein erheblich stabileres und kontrolliertes Fahrerlebnis sorgen. HINWEIS: Sie mssen mit dem SR4210 Empfnger Digitalservos verwenden. Analoge Servos reduzieren die Systemleistung und knnten berhitzen. 16 SRS4210 BEDIENUNGSANLEITUNG DE Der Spektrum SRS4210 DSMR Surface Empfnger ist mit allen Spektrum DSMR und DSM2 Sendern kompatibel. Der SRS4210 Empfnger ist nicht kompatibel mit DSM Sendern. Fr eine vollstndige Liste der kompatiblen Sender besuchen Sie bitte die SRS4210 Produktseite auf www.Spektrumrc.com. Spezifikationen Typ: DSMR Abmessungen (LxBxH):
36.3 x 24.4 x 13.0mm Kanle:
2, 4 mit deaktiviertem AVC Gewicht: 10.9 g Band: 2.4GHz Betriebsspannung:
3.59.6V Antenne Binden/Akku (BD) Port Deaktivierungsport
(Disable) Datenport (Data) Aux 2 Port Aux 1 Port Gas (TH) Port Lenkservo (ST) Port Aux-Kanle Sie knnnen die Aux Kanle als zustzliche Servokanle betreiben oder zur Stromversorgung eines Transponders oder Beleuchtung. Ist das AVC System aktiv stehen nur die Kanle Gas und Lenkung zur Verfgung. Ist das AVC System deaktiviert stehen die Aux Kanle als Servokanle zur Verfgung. Zur Deaktivierung sehen Sie bitte unter Deaktivieren der Stabilitts-Assistenzfunktion nach. 17 DE Empfngereinbau und Anschlsse Der Empfnger mu in das Fahrzeug eingebaut werden bevor er an den Sender gebunden wird. Der Empfnger kann flach mit dem Etikett nach oben oder auf der Seite eingebaut werden. Bei dem Binden erkennt das AVC System die Empfngerausrichtung automatisch. Sollte der Empfnger nicht richtig montiert oder etwas gekippt sein ist es mglich, dass das AVC System nicht einwandfrei funktioniert. Montieren Sie den Empfnger in ihrem Fahrzeug mit dem doppelseitigem Klebeband. Das Schaumtape hlt den Empfnger in Position und sichert ihn vor Vibrationen. WICHTIG: Verwenden Sie zur Montage des SRS4210 Empfnger kein Klettband, da dieses die Leistung des AVC Systems beeinflusst. Schieben Sie die Antenne in ein Antennenrhrchen und stellen dieses aufrecht. Je hher die Antenne steht, desto besser wird sie das Signal empfangen. HINWEIS: Krzen oder modifizieren sich nicht die Antenne. Failsafe In den unwahrscheinlichen Fall eines Verbindungsverlustes fhrt der Empfn-
ger den Gaskanal in die Neutralposition. Sollte der Empfnger vor dem Sender eingeschaltet worden sein, geht der Empfnger in den Failsafemode und fhrt den Gaskanal auf die Neutralposition. Wird der Sender eingeschaltet besteht wieder normale Kontrolle. WICHTIG: Die Failsafefunktion wird nur bei Signalverlust aktiv. Sie wird NICHT aktiv wenn die Spannung des Empfngerakkus unter die zulssige Grenze sinkt oder der Akku ausfllt. 18 Stromversorgung des Empfngers mit einem Regler DE Akku Gasservo Empfnger Lenkservo Stromversorgung des Empfngers mit einem Empfngerpack Zum Motor Elektronischer Fahrtenregler Akku Empfnger Steering Servo WICHTIG: Nach Einstellen der Lenk- und Gastrimmung auf ihrem Sender muss der Empfnger aus und wieder eingeschaltet werden, damit die Trimmeinstellungen gespeichert werden. Bitte beachten Sie, dass das AVC System sonst nicht richtig funktioniert. 19 DE Binden des Empfngers an den Sender Fr den Betrieb mu der Empfnger an den Sender gebunden werden. Binden ist der Prozess der Programmierung des Empfngers mit dem eindeutigen Signal eines spezifischen Senders (GUID) ist der Empfnger an den Sender gebunden wird nur er auf die Signale des Senders reagieren. Binden und Kalibrieren des Empfngers Der Empfnger muss bei jedem Bindevorgang kalibriert werden. WICHTIG: Die folgenden Schritte mssen in der beschriebenen Reihenfolge durchgefhrt werden, damit das AVC System korrekt funktioniert. 1. Stecken Sie den Bindestecker in den Bindeport des Empfngers. 2. Schalten Sie den Empfnger ein. Die orange LED blinkt und zeigt damit an, dass der Empfnger im Bindemode ist. 3. Zentrieren Sie die Gas- und Lenktrimmung auf dem Empfnger. 4. Aktivieren Sie den Bindevorgang im Sender. 5. Der Bindevorgang ist erfolgt wenn die orange LED auf dem Empfnger leuchtet. 6. Geben Sie am Sender Vollgas. 7. Drcken Sie den Gashebel auf Vollbremsung und dann zurck auf Mitte. 8. Drehen Sie das Lenkrad ganz nach rechts. 9. Drehen Sie das Lenkrad ganz nach links und und dann zurck in die Mitte. Die orange LED blinkt einmal. 10. Entfernen Sie den Bindestecker nach erfolgtem Kalibrierungs-
und Bindevorgang. 11. Schalten Sie den Sender aus. WICHTIG: Sie mssen den den Sender und Empfnger neu binden wenn:
Sie die Servolaufrichtunng (Servoreverse) nach dem Binden ndern Den Servoweg nach dem Binden ndern Den Empfnger mit einem anderem Modellspeicher nutzen wollen ndern Sie Servoreverse oder den Weg (Servotravel) nach dem Binden wird das AVC System nicht korrekt funktionieren. Deaktivieren der Stabilitts-Assistenzfunktion Wenn sie an organisierten Rennen teilnehmen kann es notwendig sein die AVC Technologie auszuschalten. Um diese zu deaktivieren stecken Sie vor dem Binden einen zweiten Bindestecker in den Deaktivierungsport (Disable). WICHTIG: Der Empfnger mu bei jedem Bindevorgang kalibriert werden. Um das AVC wieder zu kalibrieren lesen Sie bitte unter BINDEN UND KALIBRIEREN DES EMPFNGERS nach. 20 LEITFADEN ZUR PROBLEMLSUNG DE Problem Das System will sich nicht verbinden Der Empfnger geht nach kurzer Distanz in den Failsafemode Mgliche Ursache Sender und Empfn-
ger stehen zu nah zusammen Sie sind von metal-
lischen Objekten umgeben Der Empfnger ist nicht an den aktiven Speicherplatz gebunden Ihr Sender wurde versehentlich in den Bindemode gebracht und ist nicht lnger an den Empfnger gebunden berprfen Sie die Empfngerantenne auf Beschdigungen oder Krzungen Der Empfnger reagiert nicht mehr Nicht ausreichende Akkuspannung Lose oder besch-
digte Kabel/Verbinder zwischen Akku und Empfnger Die Gaineinstellung der Lenkung ist zu hoch Die Vorderrder zittern Lsung Stellen Sie den Sender und Emp-
fnger (13 m) auseinander Gehen Sie in eine Umgebung mit weniger Metall Prfen Sie das gewhlte Modell und stellen sicher dass es ge-
bunden ist Binden Sie Sender und Empfn-
ger erneut Ersetzen Sie den Empfnger oder kontakten den technische Service von Horizon Hobby Stellen Sie sicher, dass sich die Antenne im Antennerhrchen befindet und berhalb des Fahr-
zeuges ist Laden oder ersetzen Sie die Empfngerakkus. Laden Sie die Akkus. Spektrum Empfnger bentigen mindestens 3,5 Volt Betriebsspannung. Eine nicht ausreichende Stromversogung kann die Akkuspannung unter 3,5 Volt fallen lassen berprfen Sie die Kabel und Verbinder zwischen Akku und Empfnger. Reparieren oder er-
setzen Sie Kabel oder Verbinder Drehen Sie die Gaineinstellung etwas herunter 21 DE Problem Die Vorderrder schlagen in die falsche Richtung ein wenn das Fahrzeug rutscht oder rotiert Das Gas reduziert sich nicht wenn das Fahrzeug rutscht oder rotiert Mgliche Ursache Der Lenkkanal wurde nach der Kalibrierung reversiert Lsung Kalibrieren und binden Sie erneut Der Gaskanal wurde nach der Kalibrierung reversiert Kalibrieren und binden Sie erneut 22 DE GARANTIE UND SERVICE INFORMATIONEN Garantiezeitraum Exklusive Garantie Horizon Hobby Inc (Horizon) garantiert, dass das gekaufte Produkt frei von Material- und Montagefehlern ist. Der Garantiezeitraum entspricht den gesetzlichen Bestimmung des Landes, in dem das Produkt erworben wurde. In Deutschland betrgt der Garantiezeitraum 6 Monate und der Gewhrleistungszeitraum 18 Monate nach dem Garantiezeitraum. Einschrnkungen der Garantie
(a) Die Garantie wird nur dem Erstkufer (Kufer) gewhrt und kann nicht bertragen werden. Der Anspruch des Kufers besteht in der Reparatur oder dem Tausch im Rahmen dieser Garantie. Die Garantie erstreckt sich ausschlielich auf Produkte, die bei einem autorisierten Horizon Hndler erworben wurden. Verkufe an dritte werden von dieser Garantie nicht gedeckt. Garantieansprche werden nur angenommen, wenn ein gltiger Kaufnachweis erbracht wird. Horizon behlt sich das Recht vor, diese Garantiebestimmungen ohne Ankndigung zu ndern oder modifizieren und widerruft dann bestehende Garantiebestimmungen.
(b) Horizon bernimmt keine Garantie fr die Verkaufbarkeit des Produktes, die Fhigkeiten und die Fitness des Verbrauchers fr einen bestimmten Ein-
satzzweck des Produktes. Der Kufer allein ist dafr verantwortlich, zu prfen, ob das Produkt seinen Fhigkeiten und dem vorgesehenen Einsatzzweck entspricht.
(c) Ansprche des Kufers Es liegt ausschlielich im Ermessen von Horizon, ob das Produkt, bei dem ein Garantiefall festgestellt wurde, repariert oder ausgetauscht wird. Dies sind die exklusiven Ansprche des Kufers, wenn ein Defekt festgestellt wird.Horizon behlt sich vor, alle eingesetzten Komponenten zu prfen, die in den Garantiefall einbezogen werden knnen. Die Entscheidung zur Reparatur oder zum Austausch liegt nur bei Horizon. Die Garantie schliet kosmetische Defekte oder Defekte, hervorgerufen durch hhere Gewalt, falsche Behandlung des Produktes, falscher Einsatz des Produktes, kommerziellen Einsatz oder Modifikationen irgendwelcher Art aus. Die Garantie schliet Schden, die durch falschen Einbau, falsche Hand-
habung, Unflle, Betrieb, Service oder Reparaturversuche, die nicht von Horizon ausgefhrt wurden aus. Rcksendungen durch den Kufer direkt an Horizon oder eine seiner Landesvertretung bedrfen der Schriftform. 23 DE Schadensbeschrnkung Horizon ist nicht fr direkte oder indirekte Folgeschden, Einkommensausflle oder kommerzielle Verluste, die in irgendeinem Zusammenhang mit dem Produkt stehen verantwortlich, unabhngig ab ein Anspruch im Zusam-
menhang mit einem Vertrag, der Garantie oder der Gewhrleistung erhoben werden. Horizon wird darber hinaus keine Ansprche aus einem Garantiefall akzeptieren, die ber den individuellen Wert des Produktes hinaus gehen. Horizon hat keinen Einfluss auf den Einbau, die Verwendung oder die Wartung des Produktes oder etwaiger Produktkombinationen, die vom Kufer gewhlt werden. Horizon bernimmt keine Garantie und akzeptiert keine Ansprche fr in der folge auftretende Verletzungen oder Beschdigungen. Mit der Verwend-
ung und dem Einbau des Produktes akzeptiert der Kufer alle aufgefhrten Garantiebestimmungen ohne Einschrnkungen und Vorbehalte. Wenn Sie als Kufer nicht bereit sind, diese Bestimmungen im Zusammenhang mit der Benutzung des Produktes zu akzeptieren, werden Sie gebeten, dass Produkt in unbenutztem Zustand in der Originalverpackung vollstndig bei dem Verkufer zurckzugeben. Sicherheitshinweise Dieses ist ein hochwertiges Hobby Produkt und kein Spielzeug. Es muss mit Vorsicht und Umsicht eingesetzt werden und erfordert einige mechanische wie auch mentale Fhigkeiten. Ein Versagen, das Produkt sicher und umsichtig zu betreiben kann zu Verletzungen von Lebewesen und Sachbeschdigungen erheblichen Ausmaes fhren. Dieses Produkt ist nicht fr den Gebrauch durch Kinder ohne die Aufsicht eines Erziehungsberechtigten vorgesehen. Die Anleitung enthlt Sicherheitshinweise und Vorschriften sowie Hinweise fr die Wartung und den Betrieb des Produktes. Es ist unabdingbar, diese Hinweise vor der ersten Inbetriebnahme zu lesen und zu verstehen. Nur so kann der falsche Umgang verhindert und Unflle mit Verletzungen und Beschdigungen vermieden werden. Fragen, Hilfe und Reparaturen Ihr lokaler Fachhndler und die Verkaufstelle knnen eine Garantiebeurteilung ohne Rcksprache mit Horizon nicht durchfhren. Dies gilt auch fr Garan-
tiereparaturen. Deshalb kontaktieren Sie in einem solchen Fall den Hndler, der sich mit Horizon kurz schlieen wird, um eine sachgerechte Entscheidung zu fllen, die Ihnen schnellst mglich hilft. Wartung und Reparatur Muss Ihr Produkt gewartet oder repariert werden, wenden Sie sich entweder an Ihren Fachhndler oder direkt an Horizon. Rcksendungen/Reparaturen werden nur mit einer von Horizon vergebenen RMA Nummer bearbeitet. Diese Nummer erhalten Sie oder ihr Fachhndler vom technischen Service. Mehr Informationen dazu erhalten Sie im Serviceportal unter www.horizonhobby.de oder telefonisch bei dem technischen Service von Horizon. 24 DE Packen Sie das Produkt sorgfltig ein. Beachten Sie, dass der Originalkarton in der Regel nicht ausreicht, um beim Versand nicht beschdigt zu werden. Verwenden Sie einen Paketdienstleister mit einer Tracking Funktion und Ver-
sicherung, da Horizon bis zur Annahme keine Verantwortung fr den Versand des Produktes bernimmt. Bitte legen Sie dem Produkt einen Kaufbeleg bei, sowie eine ausfhrliche Fehlerbeschreibung und eine Liste aller eingesendeten Einzelkomponenten. Weiterhin bentigen wir die vollstndige Adresse, eine Telefonnummer fr Rckfragen, sowie eine Email Adresse. Garantie und Reparaturen Garantieanfragen werden nur bearbeitet, wenn ein Originalkaufbeleg von einem autorisierten Fachhndler beiliegt, aus dem der Kufer und das Kaufdatum hervorgeht. Sollte sich ein Garantiefall besttigen wird das Produkt repariert oder ersetzt. Diese Entscheidung obliegt einzig Horizon Hobby. Kostenpflichtige Reparaturen Liegt eine kostenpflichtige Reparatur vor, erstellen wir einen Kostenvoran-
schlag, den wir Ihrem Hndler bermitteln. Die Reparatur wird erst vorgenom-
men, wenn wir die Freigabe des Hndlers erhalten. Der Preis fr die Reparatur ist bei Ihrem Hndler zu entrichten. Bei kostenpflichtigen Reparaturen werden mindestens 30 Minuten Werkstattzeit und die Rckversandkosten in Rechnung gestellt. Sollten wir nach 90 Tagen keine Einverstndniserklrung zur Reparatur vorliegen haben, behalten wir uns vor, das Produkt zu vernichten oder ander-
weitig zu verwerten. ACHTUNG: Kostenpflichtige Reparaturen nehmen wir nur fr Elektronik und Motoren vor. Mechanische Reparaturen, besonders bei Hubschraubern und RC-Cars sind extrem aufwendig und mssen deshalb vom Kufer selbst vorgenommen werden. Garantie und Service Kontaktinformationen Land des Kauf EU Horizon Hobby Horizon Adresse Telefon/E-mail Adresse Technischer service@horizonhobby.eu Service Sales: Horizon Hobby GmbH
+49 (0) 4121 2655 100 Hanskampring 9 D 22885 Barsbttel, Germany 25 DE DE KONFORMITTSHINWEISE FR DIE EUROPISCHE UNION EU Konformittserklrung Horizon LLC erklrt hiermit, dass dieses Produkt konform zu den essentiellen Anforderungen der RED Direktive. Eine Kopie der Konformittserklrung ist online unter folgender Adresse verfgbar :
http://www.horizonhobby.com/content/support-render-compliance. Entsorgung in derEuropischen Union Dieses Produkt darf nicht ber den Hausmll entsorgt werden. Es ist die Verantwortung des Benutzers, dass Produkt an einer registrierten Sammelstelle fr Elektroschrott abzugeben diese Verfahren stellt sicher, dass die Umwelt geschont wird und natrliche Ressourcen nicht ber die Gebhr beansprucht werden. Dadurch wird das Wohlergehen der menschlichen Gemeinschaft geschtzt. Fr weitere Informationen, wo der Elektromll entsorgt werden kann, knnen Sie Ihr Stadtbro oder Ihren lokalen Entsorger kontaktieren. 26 FR REMARQUE La totalit des instructions, garanties et autres documents est sujette modification la seule discrtion dHorizon Hobby, Inc. Pour obtenir la documentation jour, rendez-vous sur le site www.horizonhobby.com et cliquez sur longlet de support de ce produit. SIGNIFICATION DE CERTAINS TERMES SPCIFIQUES Les termes suivants sont utiliss dans lensemble du manuel pour indiquer diffrents niveaux de danger lors de lutilisation de ce produit:
AVERTISSEMENT: procdures qui, si elles ne sont pas suivies correctement, peuvent entraner des dgts matriels et des blessures graves OU engendrer une probabilit leve de blessure superficielle. ATTENTION: procdures qui, si elles ne sont pas suivies correctement, peuvent entraner des dgts matriels ET des blessures graves. REMARQUE: procdures qui, si elles ne sont pas suivies correctement, peuvent entraner des dgts matriels ET potentiellement un risque faible de blessures. 14 ans et plus. Ceci nest pas un jouet. WARNING: Lisez la TOTALIT du manuel dutilisation afin de vous familiariser avec les caractristiques du produit avant de le faire fonctionner. Une utilisation incorrecte du produit peut entraner lendommagement du produit lui-mme, ainsi que des risques de dgts matriels, voire de blessures graves. Ceci est un produit de loisirs sophistiqu. Il doit tre manipul avec pru-
dence et bon sens et requiert des aptitudes de base en mcanique. Toute utilisation de ce produit ne respectant pas les principes de scurit et de responsabilit peut entraner des dgts matriels, endommager le produit et provoquer des blessures. Ce produit nest pas destin tre utilis par des enfants sans la surveillance directe dun adulte. Nessayez pas de d-
monter le produit, de lutiliser avec des composants incompatibles ou den amliorer les performances sans laccord dHorizon Hobby, Inc. Ce manuel comporte des instructions relatives la scurit, au fonctionnement et lentretien. Il est capital de lire et de respecter toutes les instructions et tous les avertissements du manuel avant lassemblage, le rglage ou lutilisation afin de manipuler correctement lappareil et dviter tout dgt matriel ainsi que toute blessure grave. ATTENTION AUX CONTREFAONS Nous vous remercions davoir achet un vritable produit Spektrum. Toujours acheter chez un revendeur officiel Horizon hobby pour tre sur davoir des produits authentiques. Horizon Hobby dcline toute garantie et responsabilit concernant les produits de contrefaon ou les produits se disant compatibles DSM ou Spektrum. REMARQUE: Ce produit est uniquement rserv une utilisation avec des modles rduits radiocommands de loisir. Horizon Hobby se dgage de toute responsabilit et garantie si le produit est utilis dautre manire que celle cite prcdemment. 27 FR FRFR Garantie et enregistrement Veuillez visiter www.spektrumrc.com/registration pour enregistrer en ligne votre produit. COMPOSANT TANCHE Votre nouveau Rcepteur Spektrum a t conu et fabriqu pour vous permettre de lutiliser dans diffrentes conditions humides, incluant les flaques deau, les ruisseaux, lherbe humide, la neige et mme la pluie. Bien que le produit est tanche, il na pas t conu pour tre immerg durant de longues priodes et ne doit PAS tre utilis comme un sous-marin. De plus les lments mtalliques comme les vis et les crous ainsi que les contacts des prises des cbles lectriques sont exposs loxydation si vous neffectuez un entretien supplmentaire aprs avoir utilis le produit dans des conditions humides. Pour conserver long terme les performances de votre rcepteur et conserver la garantie, les procdures dcrites dans la section Maintenance en conditions humides doivent tre rgulirement effectues si vous roulez dans des conditions humides. Si vous ne souhaitez pas effectuer la maintenance supplmentaire requise, vous ne devez pas utiliser le vhicule dans ces conditions. ATTENTION: Un dfaut de soin durant lutilisation et un non-respect des consignes suivantes peut entraner un dysfonctionnement du produit et/ou annuler la garantie. Prcautions gnrales Lisez avec attention les procdures de maintenance en conditions humides et vrifiez que vous possdez tous les outils ncessaires pour effectuer la maintenance de votre rcepteur. NE JAMAIS utiliser votre rcepteur o il pourrait entrer en contact avec de leau sale (Eau de mer ou flaque deau sur une route sale), ou de leau pollue ou contamine. Leau sale est trs conductrice et hautement corrosive. Conditions dutilisation Votre rcepteur fonctionnera parfaitement dans nimporte laquelle des conditions suivantes:
2 heures de fonctionnement en continu dans de lherbe ou de la vgtation couverte de rose. 2 heures de fonctionnement en continu dans un brouillard pais
(95% dhumidit, air satur, condensation). 1 heure de fonctionnement en continu sous une pluie lgre
(< 2.5mm par heure). 15 minutes de fonctionnement en continu sous une forte pluie
(> 7.6mm par heure). 1 heure de fonctionnement en continu sous une faible chute de neige fondue
(< 2.5mm par heure). 28 FR FRFR 1 heure de fonctionnement en continu sous une faible chute de neige
(< 6.35mm par heure). 45 minutes de fonctionnement en continu dans de leau douce (la hauteur deau doit tre infrieure la hauteur du chssis du vhicule), ou un barbotage dans leau sans immerger les composants tanches. 5 minutes de fonctionnement en continu dans de leau douce (leau ne doit pas dpasser une hauteur (environ 10 mm) au-dessus du chssis du vhicule), barbotage constant dans leau, ou immersion frquente intermittente des composants tanches. 1 heure de fonctionnement en continu dans du sable humide, de la boue ou de la neige (la matire du terrain doit toujours rester en dessous du chssis du vhicule), projection constante sans immersion ou couverture des composants tanches. En outre, quand les procdures de maintenance (dcrites ci-dessous) sont excutes promptement aprs lexposition, le rcepteur restera long terme protg de loxydation et autres dgts pouvant tre causs par leau. Maintenance en conditions humides Rincez dlicatement le rcepteur laide dun arrosoir afin de retirer la boue et la poussire. Retirez la batterie et schez ses contacts. Si vous possdez un compresseur dair ou une bombe dair compress, soufflez le rcepteur pour liminer leau loge dans les renfoncements et les recoins. Chassez toute lhumidit qui se trouve dans les ports. Laissez le rcepteur scher avant de le stocker. Leau peut continuer scouler ou svaporer durant quelques heures. REMARQUE : Ne jamais utiliser un nettoyeur haute-pression pour nettoyer le vhicule. REMARQUE : Le rcepteur est conu pour une utilisation en conditions humides. Contrlez que les autres lments composant votre vhicule sont tanches ou rsistants aux projections avant de rouler en conditions humides. AVC CONTRLE ACTIF DU VHICULE La technologie AVC est la toute dernire innovation de la gamme Spektrum de chez Horizon Hobby. Ce systme de stabilisation Spektrum apporte une toute nouvelle exprience dans pilotage RC. La technologie AVC utilise des capteurs pour agir sur la sortie de la voie des gaz et de la direction, pour plus de stabilit. REMARQUE: Vous devez utiliser des servos digitaux avec le rcepteur SRS4210. Lutilisation de servos analogiques diminuera les performances du systme et risque de provoquer la surchauffe des servos. 29 FR MANUEL DUTILISATION DU SRS4210 Le Spektrum Rcepteur SRS4210 DSMR est compatible avec tous les metteurs Spektrum DSMR, mais est galement compatible avec les metteurs DSM2. Le SR2000 NEST PAS compatible avec les metteurs DSM. Pour la liste complte des metteurs compatibles, consultez la page du SRS4210 sur le site spektrumrc.com. Caractristiques Modulation: DSMR Dimensions (LxlxH):
36.3 x 24.4 x 13.0mm Voies:
2, 4 si AVC dsactiv Masse: 10.9 g Bande: 2.4GHz Tension dalimentation:
3.59.6V Antenne Port Affectation/
Alimentation Port de dsactivation Port Data (Donnes) Port Aux 2 Port Aux 1 Port des GAZ Port de la direction Voies auxiliaires Les voies auxiliaires peuvent servir commander un servo additionnel, ou dalimentation pour une puce de comptage. Si lAVC est activ, seules la voie des gaz et de la direction seront oprationnelles, la voie Aux ne pourra servir qua alimenter une puce de comptage ou des clairages. Si lAVC est dsactiv (Voir la section DESACTIVATION DE LA FONCTION DE STABILISATION pour dsactiver lAVC), les voies auxiliaires pourront com-
mander des servos. 30 FR Branchements et installation du rcepteur Vous devez installer le rcepteur dans le vhicule avant de laffecter lmetteur. Le rcepteur peut tre install plat avec ltiquette sur le dessus ou sur la tranche. Le systme AVC dtecte automatiquement lorientation du rcepteur lors de laffectation. Le rcepteur doit tre plac totalement plat ltiquette vers le haut ou totalement la perpendiculaire quand il est install sur sa tranche. Si le rcepteur est lgrement inclin, le fonctionnement de lAVC sera altr. Si vous modifiez lorientation du rcepteur aprs laffectation, vous devrez le raffecter de nouveau pour le bon fonctionnement de lAVC. Installez le rcepteur dans votre vhicule en utilisant la mousse adhsive double face incluse. La mousse adhsive maintiendra le rcepteur en place tout en lisolant des vibrations. IMPORTANT: Ne fixez pas le rcepteur SRS4210 laide de bande auto-agrippante. Les performances du systme AVC seraient dgrades. Lantenne doit tre guide verticalement laide dun tube dantenne. Plus lantenne sera leve, meilleure sera la rception. REMARQUE: Ne jamais couper ou modifier lantenne. Failsafe (Les positions de scurit intgre) Dans lhypothse peu probable dune perte de liaison radio durant lutilisation, le rcepteur ramnera la voie des gaz au neutre. Si le rcepteur est mis sous tension avant lmetteur, le rcepteur entrera en mode Failsafe, la voie des gaz se mettra au neutre. Quand lmetteur sera mis sous tension, les commandes reprendront leur fonctionnement normal. IMPORTANT: le Failsafe sactive uniquement en cas de perte du signal de lmetteur. Le Failsafe nest PAS activ si la charge de la batterie du rcepteur est faible ou en cas de perte de puissance du rcepteur. 31 FR Installation du rcepteur avec pack batterie Batterie Servo des gaz Rcepteur Servo de direction Installation du rcepteur avec ESC vers le moteur Contrleur Batterie Rcepteur Servo de direction IMPORTANT: Si vous agissez sur le trim des gaz ou de la direction lmetteur, le rcepteur devra tre mis hors tension puis ractiv pour enregistrer les nouvelles position des trims. Autrement lAVC ne fonctionnera pas correctement. 32 FR Affectation du rcepteur lmetteur Laffectation (ou Bind) est le processus consistant renseigner le rcepteur sur le code spcifique de lmetteur, appel identificateur unique global (GUID, Globally Unique Identifier), et mmoriser les valeurs de scurit intgre. Lorsquun rcepteur est affect un metteur/une mmoire de modle, il rpond uniquement cet metteur/cette mmoire de modle spcifique
(voir ModelMatch pour plus dinformations). Affectation et calibration du rcepteur Vous devrez recalibrer le rcepteur chaque affectation. IMPORTANT: Veuillez parfaitement suivre lordre des tapes de la squence suivante afin dassurer le fonctionnement optimal de lAVC. 1. 2. Mettez le rcepteur sous tension. La DEL orange clignote indiquant Insrez la prise daffectation dans le port BIND du rcepteur. que le rcepteur est en mode affectation. 3. A lmetteur mettez les trims ST TRIM et TH TRIM au neutre. 4. Placez votre metteur en mode Affectation. 5. La DEL orange sclaire fixement une fois le processus daffectation termin. 6. Pressez la gchette en position plein gaz. 7. Poussez la gchette en position frein maxi, puis relchez la gchette pour la replacer au neutre. 8. Tournez le volant compltement vers la droite. 9. Tournez le volant compltement vers la gauche, puis relchez-le pour le remettre au neutre. La DEL orange va clignoter une fois. 10. Retirez la prise daffectation du rcepteur une fois que laffectation et la calibration sont effectues. 11. Mettez lmetteur hors tension. IMPORTANT: Vous devez raffecter votre rcepteur si vous :
Avez invers la direction du servo aprs laffectation Avez modifi la valeur de la course aprs laffectation Souhaitez utiliser le rcepteur sur une mmoire modle diffrente Si vous modifiez la direction ou la course dun servo aprs laffectation, lAVC ne fonctionnera pas correctement. Dsactivation de la fonction de stabilisation Si vous participez une course officielle, vous devrez probablement ds-
activer le systme AVC. Pour dsactiver lAVC, insrez une deuxime prise daffectation dans le port DISABLE (Dsactivation), puis effectuez laffectation. IMPORTANT: Vous devez re-calibrer le rcepteur chaque affectation. Pour activer lAVC, consultez la section AFFECTATION ET CALIBRATION DU RECEPTEUR. 33 FR GUIDE DE DPANNAGE 2.4GHZ Solution Eloignez lmetteur une distance de 2m environ Eloignez-vous de cette zone Vrifiez que vous avez slectionn le bon modle et quil est affect R-effectuez le procesus daffectation Remplacez le rcepteur ou contactez le service technique Horizon Hobby Assurez-vous que lantenne du rcepteur se trouve dans un tube dantenne et au-dessus du vhicule Rechargez totalement les bat-
teries. Les rcepteurs Spektrum ncessitent un minimum de 3.5V pour fonctionner. Une alimentation insuffisante, peut momentanment chuter en dessous de 3.5V, causant une coupure dalimentation Contrlez ltat des cbles et remplacez-les sils sont endommags Diminuez le gain la direction Refaites laffectation et la calibration Problme Le systme ne se connecte pas Le rcepteur passe en mode failsafe une faible distance de lmetteur Cause possible Lmetteur et le rcepteur sont trop proches lun de lautre Vous tes trop proche dobjets mtalliques Le modle slection-
n nest pas affect avec lmetteur Emetteur mis ac-
cidentellement en mode affectation Contrlez ltat de lantenne du rcepteur Le rcepteur ne rpond pas du-
rant lutilisation Tension de la batterie trop faible Cbles abms ou dbranchs entre la batterie et le rcepteur Le gain la direction est trop lev Le sens de la voie de direction a t invers aprs laffectation Les roues avant oscillent Les roues avant sorientent dans la mauvaise direction quand la voiture pivote/
glisse 34 FR Problme La puissance nest pas rduite quand la voiture pivote/glisse Cause possible Le sens de la voie des gaz a t invers aprs laffectation Solution Refaites laffectation et la calibration GARANTIE ET RPARATIONS Dure de la garantie Garantie exclusive - Horizon Hobby, Inc. (Horizon) garantit que le Produit achet (le Produit ) sera exempt de dfauts matriels et de fabrication sa date dachat par lAcheteur. La dure de garantie correspond aux dispositions lgales du pays dans lequel le produit a t acquis. La dure de garantie est de 6 mois et la dure dobligation de garantie de 18 mois lexpiration de la priode de garantie. Limitations de la garantie
(a) La garantie est donne lacheteur initial ( Acheteur ) et nest pas trans-
frable. Le recours de lacheteur consiste en la rparation ou en lchange dans le cadre de cette garantie. La garantie sapplique uniquement aux produits achets chez un revendeur Horizon agr. Les ventes faites des tiers ne sont pas couvertes par cette garantie. Les revendications en garantie seront acceptes sur fourniture dune preuve dachat valide uniquement. Horizon se rserve le droit de modifier les dispositions de la prsente garantie sans avis pralable et rvoque alors les dispositions de garantie existantes.
(b) Horizon nendosse aucune garantie quant la vendabilit du produit ou aux capacits et la forme physique de lutilisateur pour une utilisation donne du produit. Il est de la seule responsabilit de lacheteur de vrifier si le produit correspond ses capacits et lutilisation prvue.
(c) Recours de lacheteur Il est de la seule discrtion dHorizon de dterminer si un produit prsentant un cas de garantie sera rpar ou chang. Ce sont l les recours exclusifs de lacheteur lorsquun dfaut est constat. Horizon se rserve la possibilit de vrifier tous les lments utiliss et susceptibles dtre intgrs dans le cas de garantie. La dcision de rparer ou de remplacer le produit est du seul ressort dHorizon. La garantie exclut les d-
fauts esthtiques ou les dfauts provoqus par des cas de force majeure, une manipulation incorrecte du produit, une utilisation incorrecte ou commerciale de ce dernier ou encore des modifications de quelque nature quelles soient. La garantie ne couvre pas les dgts rsultant dun montage ou dune manipulation errons, daccidents ou encore du fonctionnement ainsi que des tentatives dentretien ou de rparation non effectues par Horizon. Les retours effectus par le fait de lacheteur directement Horizon ou lune de ses reprsentations nationales requirent une confirmation crite. 35 FR Limitation des dgts Horizon ne saurait tre tenu pour responsable de dommages consquents directs ou indirects, de pertes de revenus ou de pertes commerciales, lis de quelque manire que ce soit au produit et ce, indpendamment du fait quun recours puisse tre formul en relation avec un contrat, la garantie ou lobligation de garantie. Par ailleurs, Horizon nacceptera pas de recours issus dun cas de garantie lorsque ces recours dpassent la valeur unitaire du produit. Horizon nexerce aucune influence sur le montage, lutilisation ou la maintenance du produit ou sur dventuelles combinaisons de produits choisies par lacheteur. Horizon ne prend en compte aucune garantie et naccepte aucun recours pour les blessures ou les dommages pouvant en rsulter. En utilisant et en montant le produit, lacheteur accepte sans restriction ni rserve toutes les dispositions relatives la garantie figurant dans le prsent document. Si vous ntes pas prt, en tant quacheteur, accepter ces dispositions en relation avec lutilisation du produit, nous vous demandons de restituer au vendeur le produit complet, non utilis et dans son emballage dorigine. Indications relatives la scurit Ceci est un produit de loisirs perfectionn et non un jouet. Il doit tre utilis avec prcaution et bon sens et ncessite quelques aptitudes mcaniques ainsi que mentales. Lincapacit utiliser le produit de manire sre et raisonnable peut provoquer des blessures et des dgts matriels consquents. Ce produit nest pas destin tre utilis par des enfants sans la surveillance par un tuteur. La notice dutilisation contient des indications relatives la scurit ainsi que des indications concernant la maintenance et le fonctionnement du produit. Il est absolument indispensable de lire et de comprendre ces indica-
tions avant la premire mise en service. Cest uniquement ainsi quil sera possible dviter une manipulation errone et des accidents entranant des blessures et des dgts. Questions, assistance et rparations Votre revendeur spcialis local et le point de vente ne peuvent effectuer une estimation dligibilit lapplication de la garantie sans avoir consult Horizon. Cela vaut galement pour les rparations sous garantie. Vous voudrez bien, dans un tel cas, contacter le revendeur qui conviendra avec Horizon dune dcision approprie, destine vous aider le plus rapidement possible. Maintenance et rparation Si votre produit doit faire lobjet dune maintenance ou dune rparation, adressez-vous soit votre revendeur spcialis, soit directement Horizon. Emballez le produit soigneusement. Veuillez noter que le carton demballage dorigine ne suffit pas, en rgle gnrale, protger le produit des dgts pouvant survenir pendant le transport. Faites appel un service de messagerie proposant une fonction de suivi et une assurance, puisque Horizon ne prend aucune responsabilit pour lexpdition du produit jusqu sa rception accep-
te. Veuillez joindre une preuve dachat, une description dtaille des dfauts ainsi quune liste de tous les lments distincts envoys. Nous avons de plus besoin dune adresse complte, dun numro de tlphone (pour demander des renseignements) et dune adresse de courriel. 36 FR Garantie et rparations Les demandes en garantie seront uniquement traites en prsence dune preuve dachat originale manant dun revendeur spcialis agr, sur laquelle figurent le nom de lacheteur ainsi que la date dachat. Si le cas de garantie est confirm, le produit sera rpar Cette dcision relve uniquement de Horizon Hobby. Rparations payantes En cas de rparation payante, nous tablissons un devis que nous transmet-
tons votre revendeur. La rparation sera seulement effectue aprs que nous ayons reu la confirmation du revendeur. Le prix de la rparation devra tre acquitt au revendeur. Pour les rparations payantes, nous facturons au minimum 30 minutes de travail en atelier ainsi que les frais de rexpdition. En labsence dun accord pour la rparation dans un dlai de 90 jours, nous nous rservons la possibilit de dtruire le produit ou de lutiliser autrement. ATTENTION : Nous neffectuons de rparations payantes que pour les composants lectroniques et les moteurs. Les rparations touchant la mcanique, en particulier celles des hlicoptres et des voitures radiocommandes, sont extrmement coteuses et doivent par consquent tre effectues par lacheteur lui-mme. Coordonnes de Garantie et rparations Land des Kauf EU Horizon Hobby Horizon Adresse Telefon/E-mail Adresse Technischer service@horizonhobby.eu Service Sales: Horizon Hobby GmbH
+49 (0) 4121 2655 100 Hanskampring 9 D 22885 Barsbttel, Germany 37 FR DCLARATION DE CONFORMIT DE LUNION EUROPENNE Dclaration de conformit de lUnion europenne :
Horizon Hobby, LLC dclare par la prsente que ce produit est en conformit avec les exigences essentielles et les autres dispositions de la directive RED. Une copie de la dclaration de conformit europenne est disponible :
http://www.horizonhobby.com/content/support-render-compliance. Elimination dans lUnion europenne Ce produit ne doit pas tre limin avec les ordures mnagres. Il est de la responsabilit de lutilisateur de remettre le produit un point de collecte officiel des dchets dquipements lectriques. Cette procdure permet de garantir le respect de lenvironnement et labsence de sollicitation excessive des ressources naturelles. Elle protge de plus le bien-tre de la communaut humaine. Pour plus dinformations quant aux lieux dliminations des dchets dquipements lectriques, vous pouvez contacter votre mairie ou le service local de traitement des ordures mnagres. IC Dclaration:
En vertu de la rglementation de lindustrie du Canada, cet metteur de radio ne peuvent fonctionner en utilisant une antenne dun type et maximum (ou moins) Gain approuv pour lmetteur par Industrie Canada. pour rduire risque dinterfrence aux autres utilisateurs, le type dantenne et son gain doivent tre choisis de sorte que la puissance isotrope rayonne quivalente (PIRE) ne dpasse pas ce qui est ncessaire pour la russite de communication. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Remarque: Toute modification de ce produit annule lautorit de lutilisateur utiliser cet quipement. 38 IT AVVISO Tutte le istruzioni, le garanzie e gli altri documenti pertinenti sono soggetti a cambiamenti a totale discrezione di Horizon Hobby, Inc. Per una documen-
tazione aggiornata sul prodotto, visitare il sito horizonhobby.com e fare clic sulla sezione Support del prodotto. SIGNIFICATO DEI TERMINI USATI Nella documentazione relativa al prodotto vengono utilizzati i seguenti termini per indicare i vari livelli di pericolo potenziale durante luso del prodotto:
AVVERTENZA: indica procedure che, se non debitamente seguite, determinano il rischio di danni alle cose, danni collaterali e gravi lesioni alle persone o il rischio elevato di lesioni superficiali alle persone. ATTENZIONE: indica procedure che, se non debitamente seguite, determinano il rischio di danni alle cose E di gravi lesioni alle persone. AVVISO: indica procedure che, se non debitamente seguite, possono determinare il rischio di danni alle cose E il rischio minimo o nullo di lesioni alle persone. Almeno 14 anni. Non un giocattolo. AVVERTENZA: Leggere TUTTO il manuale di istruzioni e familiariz-
zare con le caratteristiche del prodotto prima di farlo funzionare. Un uso improprio del prodotto pu causare danni al prodotto stesso e alle altre cose e gravi lesioni alle persone. Questo aeromodello un prodotto sofisticato per appassionati di model-
lismo. Deve essere azionato in maniera attenta e responsabile e richiede alcune conoscenze basilari di meccanica. Luso improprio o irresponsabile di questo prodotto pu causare lesioni alle persone e danni al prodotto stesso o alle altre cose. Questo prodotto non deve essere utilizzato dai bambini senza la diretta supervisione di un adulto. Non tentare di smon-
tare, utilizzare componenti incompatibili o modificare il prodotto in nessun caso senza previa approvazione di Horizon Hobby, Inc. Questo manuale contiene le istruzioni per la sicurezza, luso e la manutenzione del prodotto. fondamentale leggere e seguire tutte le istruzioni e le avvertenze del manuale prima di montare, impostare o utilizzare il prodotto, al fine di utilizzarlo correttamente e di evitare di causare danni alle cose o gravi lesioni alle persone. ATTENZIONE PER I PRODOTTI CONTRAFFATTI: Raccomandiamo di acquistare sempre da rivenditori autorizzati Horizon per essere sicuri di avere un prodotto originale di alta qualit. Horizon rifiuta qualsiasi tipo di assistenza in garanzia di prodotti contraffatti o che dichiarano compatibilit con DSM o Spektrum. AVVISO: Questo prodotto rivolto esclusivamente a veicoli ed aerei di tipo hobbistico senza pilota a bordo e controllati a distanza. Al di fuori di questo utilizzo, Horizon Hobby declina ogni responsabilit e non riconosce interventi in garanzia. 3939 IT Registrazione della garanzia Visitare oggi stesso il sito www.spektrumrc.com/registration per registrare il prodotto. COMPONENTI IMPERMEABILI Il vostro nuovo ricevitore Spektrum stato progettato e costruito per poter usare il vostro veicolo sul bagnato, incluse pozzanghere, ruscelli, erba bagnata, neve e anche pioggia. Sebbene sia resistente allacqua, questo componente non stato progettato per stare immerso in acqua per lunghi periodi e NON si pu trattare come fosse un sottomarino. Inoltre molte parti metalliche, inclusi viti e dadi, come pure i contatti sui cavi elettrici, sono suscettibili di corrosione se non si fa una particolare manutenzione dopo luso in condizioni di bagnato. Per prolungare al massimo le prestazioni nel tempo vostro ricevitore e tenere valida la garanzia, lo si pu usare solo nel modo descritto nella sezione Condizioni duso di questo manuale. In aggiunta, le procedure descritte nella sezione Manutenzione in condizioni di bagnato, si devono applicare regolarmente se si sceglie di usarlo in queste condizioni. Se non siete disposti ad eseguire questa manutenzione aggiuntiva, allora dovete evitare di utilizzare il veicolo in condizioni di bagnato. ATTENZIONE: La mancata applicazione di queste cautele mentre si usa questo prodotto e il rispetto delle seguenti precauzioni, potrebbe portare ad un malfunzionamento del prodotto e/o ad invalidare la garanzia. Precauzioni generali Leggere attentamente le procedure di manutenzione in condizioni di bagnato, per essere sicuri di avere tutte le attrezzature necessarie per questo scopo. Non utilizzate il vostro ricevitore quando c il rischio che entri in contatto con acqua salata (acqua marina o acqua proveniente da una strada su cui sia stato sparso del sale), acqua contaminata o inquinata. Lacqua salata molto conduttiva e altamente corrosiva, perci bisogna usare molta cautela. Condizioni di utilizzo Questo ricevitore funzioner correttamente in ognuna delle seguenti situazioni:
2 ore di funzionamento continuo in erba o vegetazione coperta da rugiada
(bagnata). 2 ore di funzionamento continuo in nebbia fitta (95% di umidit, aria satura, condensazione di acqua). 1 ora di funzionamento continuo in pioggia leggera (< di 2,5 mm/ora). 15 minuti di funzionamento continuo sotto la pioggia intensa (> 7,6 mm/ora). 1 ora di funzionamento continuo con nevischio leggero (< di 2,5 mm/ora). 1 ora di funzionamento continuo con neve leggera (< di 6,35 mm/ora). 4040 IT 45 minuti di funzionamento continuo stando fermi o correndo in acqua dolce corrente (il livello dellacqua dovrebbe stare sempre sotto al telaio del veicolo), o spruzzi costanti di acqua, senza alcuna immersione dei componenti impermeabili. 5 minuti di funzionamento continuo stando fermi o correndo in acqua dolce corrente (il livello dellacqua non dovrebbe mai superare i 10 mm al di sopra del telaio del veicolo), spruzzi costanti o frequenti di acqua, immersioni intermittenti dei componenti impermeabili. 1 ora di funzionamento continuo in sabbia umida, sporcizia, fango o neve
(il loro livello deve sempre stare al disotto del telaio del veicolo), spruzzi costanti senza immersione o copertura dei componenti impermeabili. Inoltre, se si esegue unadeguata manutenzione (come descritta pi avanti) subito dopo lesposizione allacqua, il ricevitore rester ben protetto dalla corrosione o da altri danni a lungo termine, derivanti dallacqua. Manutenzione in condizioni di bagnato Risciacquate con cura il fango e la sporcizia dal veicolo con un getto di acqua. Togliete la batteria (o le batterie) e asciugate i contatti. Se avete a disposizione dellaria compressa, soffiate sul ricevitore per togliere i residui di acqua eventualmente rimasti nelle piccole fessure e negli angoli. Asciugate lacqua rimasta allinterno dei connettori. Lasciate che il ricevitore si asciughi allaria prima di riporlo. Lacqua continuer a sgocciolare o ad evaporare per alcune ore. AVVISO: In questi casi non usate acqua sotto pressione per pulire il vostro veicolo. AVVISO: Il ricevitore impermeabilizzato per poterlo usare in condizioni di bagnato. Prima di usare il veicolo in queste condizioni, accertatevi che gli altri componenti del veicolo siano impermeabili o resistenti allacqua. AVC - CONTROLLO ATTIVO DEL VEICOLO La tecnologia AVC una novit Spektrum RC da Horizon Hobby. Questo sistema di stabilizzazione Spektrum aggiunge un nuovo livello di controllo alla vostra esperienza nel pilotaggio RC. La tecnologia AVC utilizza dei sensori per regolare sterzo e motore fornendo una guida pi stabile e controllata. AVVISO: Con il ricevitore SR4210 bisogna usare dei servi digitali. Se si usassero dei servi analogici, le prestazioni del sistema sarebbero ridotte causando anche un surriscaldamento dei servi stessi. 4141 ITIT MANUALE SRS4210 Il ricevitore car Spektrum SRS4210 DSMR compatibile con tutti i trasmettitori Spektrum DSMR ed anche compatibile in modo retroattivo con i trasmettitori DSM2. Il ricevitore SRS4210 NON compatibile con i trasmettitori DSM. Per un elenco completo dei trasmettitori compatibili, si veda la pagina del prodotto SRS4210 sul sito web spektrumrc.com. Caratteristiche Tipo: DSMR Dimensioni (LxWxH):
36.3 x 24.4 x 13.0mm Canali:
2, 4 con AVC disabilitato Peso: 10.9 g Banda: 2.4GHz Tensione operativa:
3.59.6V Antenna Presa Bind/Batteria Porta disattivazione Porta dati Presa Aux 2 Presa Aux 1 Presa Motore Presa Sterzo Canali AUX I canali AUX possono controllare dei servi aggiuntivi oppure alimentare un transponder personale. Se lAVC attivo, restano operativi solo 2 canali (sterzo e motore). I canali AUX si possono usare per alimentare un transponder personale o delle luci. Se lAVC non attivo (si veda il relativo paragrafo sul manuale), i canali AUX si possono usare per comandare dei servi aggiuntivi. 4242 IT Collegamenti al ricevitore e installazione Prima di connettere (binding) il trasmettitore al ricevitore, bisogna aver gi in-
stallato il ricevitore sul veicolo. Il ricevitore si pu montare piatto con letichetta rivolta verso lalto o appoggiandolo su di un fianco. Quando si connette il ricevi-
tore, il sistema AVC riconosce automaticamente lorientamento del ricevitore. Quando letichetta rivolta verso lalto, il ricevitore deve essere perfettamente piatto o perfettamente perpendicolare quando montato su di un fianco. Se il ricevitore fosse inclinato anche leggermente, lAVC non funzionerebbe correttamente. Se si cambia lorientamento del ricevitore dopo la connessione, bisogna rifarla per avere un funzionamento corretto. Installare il ricevitore sul veicolo usando il nastro in spugna biadesiva fornito, in questo modo, oltre a tenere fermo il ricevitore, lo si protegge anche dalle vibrazioni. IMPORTANTE: Per installare il ricevitore SRS4210 non usare materiale a strappo, altrimenti si andrebbe a influire sulle prestazioni del sistema AVC. Montare lantenna nella parte alta del veicolo usando un tubetto per tenerla lontano dal telaio, pi alta e meglio riceve il segnale. AVVISO: Non tagliare o modificare lantenna. Failsafe Nel malaugurato caso che si perda il collegamento radio durante lutilizzo, il ricevitore mander il servo del motore nella posizione neutra (motore al minimo). Se si accende il ricevitore prima del trasmettitore, il ricevitore entrer in modalit Failsafe portando il canale del motore nel suo punto neutro. Quando si accende il trasmettitore, tutto torna normale. IMPORTANTE: Il Failsafe si attiva solo nel caso che venga perso il segnale del suo trasmettitore. Non si attiver se la batteria del ricevitore scende sotto alla sua tensione minima o se il ricevitore non pi alimentato. 4343 IT Installazione con Regolatore Elletronico Batteria Servo Motore Ricevitore Servo Sterzo Installazione con pacco batteria Regolatore elettronico di velocit Batteria Ricevitore Al Motore Servo Sterzo IMPORTANTE: Se sul trasmettitore si regolano i trim di sterzo e motore, per registrare la loro posizione bisogna spegnere e riaccendere il ricevitore. In caso contrario il sistema AVC non funzionerebbe regolarmente. 4444 IT Connessione (Binding) del ricevitore al trasmettitore Questa procedura programma il ricevitore a riconoscere il numero unico GUID del suo trasmettitore. Una volta connesso, il ricevitore risponder solo a quel trasmettitore. Connettere e calibrare il ricevitore Tutte le volte che si entra nella procedura di connessione bisogna calibrare il ricevitore. IMPORTANTE: Bisogna attenersi scrupolosamente alla seguente procedura per avere lAVC che funziona correttamente. 1. 2. Accendere il ricevitore. Il LED arancio lampeggia indicando che Inserire il Bind Plug nella presa BIND del ricevitore. il ricevitore pronto per la connessione. 3. Sul trasmettitore centrare ST TRIM e TH TRIM. 4. Mettere il trasmettitore in modalit per la connessione (bind). 5. La procedura di connessione completa quando il LED arancio del ricevitore resta acceso fisso. 6. Con il grilletto del trasmettitore mettere il motore al massimo. 7. Portare il grilletto del trasmettitore nella posizione di massimo freno, poi riportarlo al centro. 8. Portare il volantino del trasmettitore completamente a destra. 9. Portare il volantino del trasmettitore completamente a sinistra, poi riportarlo al centro. Il LED arancio lampeggia una volta. 10. Quando la procedura di connessione e di calibrazione sono terminate, si pu togliere il Bind Plug. 11. Spegnere il trasmettitore. IMPORTANTE: Nei seguenti casi bisogna rifare la connessione fra trasmettitore e ricevitore:
Si fatto un Reverse dopo la connessione Si cambiata una corsa dopo la connessione Si vuole usare il ricevitore con un altro modello in memoria Se si cambia il Reverse di un servo o si regola una corsa, lAVC non lavorer correttamente. Disabilitare la funzione di assistenza alla stabilit Se si partecipa ad una gara, potrebbe essere richiesto di disabilitare il sistema AVC. Per disabilitare il sistema AVC, inserire un secondo Bind Plug nella porta Disable prima di fare la connessione. IMPORTANTE: Tutte le volte che si fa la connessione (bind), bisogna calibrare il ricevitore. Per attivare lAVC, si veda il relativo paragrafo sul manuale. 4545 IT GUIDA ALLA RISOLUZIONE DEI PROBLEMI 2.4GHZ Possible Causa La trasmittente e la ricevente sono troppo vicine La trasmittente e la ricevente sono troppo vicine a dei grandi oggetti metallici
(veicoli, ecc.) Il ricevitore non connesso con la memoria del modello attivo La trasmittente stata messa in mo-
dalit collegamento e la ricevente non pi collegata Controllare lantenna della ricevente e assicurarsi che non sia tagliata o danneggiata Tensione della batteria bassa I cavi o i connet-
tori tra batteria e ricevente sono danneggiati o lenti La sensibilit dello sterzo troppo alta Il canale dello sterzo stato invertito dopo la calibrazione Il canale del motore stato invertito dopo la calibrazione Soluzione Spostare la trasmittente da 1 a 3 metri dalla ricevente Allontanarsi dai grandi oggetti metallici (veicoli, ecc.) Assicurarsi che sia stata selezio-
nata la memoria di modello corretta e che la trasmittente sia collegata al modello Rifare il collegamento tra trasmittente e ricevente Sostituirla o contattare il servizio di assistenza Horizon Assicurarsi che lantenna della ricevente si trovi in un tubetto per antenne, al di sopra del veicolo Caricare o sostituire la batteria del ricevitore Controllare i cavi e le connessioni tra batteria e ricevente. Riparare o sostituire i cavi e/o i connettori Ridurre la sensibilit dello sterzo Rifare la connessione e calibrare Rifare la connessione e calibrare Problema Il sistema non si collega La ricevente va in modalit Failsafe a poca distanza dalla trasmittente La ricevente smette di rispondere durante lutilizzo Le ruote ante-
riori oscillano Quando lauto slitta o si gira, le ruote anteriori sterzano dalla parte sbagliata Quando lauto slitta o si gira, il motore non si riduce 4646 IT GARANZIA Periodo di garnzia Horizon Hobby, Inc., (Horizon) garantisce che i prodotti acquistati (il Prodotto) sono privi di difetti relativi ai materiali e di eventuali errori di montaggio. Il periodo di garanzia conforme alle disposizioni legali del paese nel quale il prodotto stato acquistato. Tale periodo di garanzia ammonta a 6 mesi e si estende ad altri 18 mesi dopo tale termine. Limiti della garanzia
(a) La garanzia limitata allacquirente originale (Acquirente) e non cedibile a terzi. Lacquirente ha il diritto a far riparare o a far sostituire la merce durante il periodo di questa garanzia. La garanzia copre solo quei prodotti acquistati presso un rivenditore autorizzato Horizon. Altre transazioni di terze parti non sono coperte da questa garanzia. La prova di acquisto necessaria per far valere il diritto di garanzia. Inoltre, Horizon si riserva il diritto di cambiare o modificare i termini di questa garanzia senza alcun preavviso e di escludere tutte le altre garanzie gi esistenti.
(b) Horizon non si assume alcuna garanzia per la disponibilit del prodotto, per ladeguatezza o lidoneit del prodotto a particolari previsti dallutente. sola responsabilit dellacquirente il fatto di verificare se il prodotto adatto agli scopi da lui previsti.
(c) Richiesta dellacquirente spetta soltanto a Horizon, a propria discrezione riparare o sostituire qualsiasi prodotto considerato difettoso e che rientra nei termini di garanzia. Queste sono le uniche rivalse a cui lacquirente si pu appellare, se un prodotto difettoso. Horizon si riserva il diritto di controllare qualsiasi componente utilizzato che viene coinvolto nella rivalsa di garanzia. Le decisioni relative alla sostituzione o alla riparazione avvengono solo in base alla discrezione di Horizon. Questa garanzia non copre dei danni superficiali o danni per cause di forza maggiore, uso errato del prodotto, negligenza, uso ai fini commerciali, o una qualsiasi modifica a qualsiasi parte del prodotto. Questa garanzia non copre danni dovuti ad una installazione errata, ad un funzionamento errato, ad una manutenzione o un tentativo di riparazione non idonei a cura di soggetti diversi da Horizon. La restituzione del prodotto a cura dellacquirente, o da un suo rappresentante, deve essere approvata per iscritto dalla Horizon. Limiti di danno Horizon non si riterr responsabile per danni speciali, diretti, indiretti o conse-
quenziali; perdita di profitto o di produzione; perdita commerciale connessa al prodotto, indipendentemente dal fatto che la richiesta si basa su un contratto o sulla garanzia. Inoltre la responsabilit di Horizon non supera mai in nessun caso il prezzo di acquisto del prodotto per il quale si chiede la responsabilit. Horizon non ha alcun controllo sul montaggio, sullutilizzo o sulla manutenzione del prodotto o di combinazioni di vari prodotti. Quindi Horizon non accetta nessuna responsabilit per danni o lesioni derivanti da tali circostanze. Con lutilizzo e il montaggio del prodotto lutente acconsente a tutte le condizioni, limitazioni e riserve di garanzia citate in questa sede. Qualora lutente non 4747 IT fosse pronto ad assumersi tale responsabilit associata alluso del prodotto, si suggerisce di restituire il prodotto intatto, mai usato e immediatamente presso il venditore. Indicazioni di sicurezza Questo un prodotto sofisticato di hobbistica e non un giocattolo. Esso deve essere manipolato con cautela, con giudizio e richiede delle conoscenze basi-
lari di meccanica e delle facolt mentali di base. Se il prodotto non verr ma-
nipolato in maniera sicura e responsabile potrebbero risultare delle lesioni, dei gravi danni a persone, al prodotto o allambiente circostante. Questo prodotto non concepito per essere usato dai bambini senza una diretta supervisione di un adulto. Il manuale del prodotto contiene le istruzioni di sicurezza, di funzionamento e di manutenzione del prodotto stesso. fondamentale leggere e seguire tutte le istruzioni e le avvertenze nel manuale prima di mettere in funzione il prodotto. Solo cos si eviter un utilizzo errato e di preverranno incidenti, lesioni o danni. Domande, assistenza e riparazioni Il vostro negozio locale e/o luogo di acquisto non possono fornire garanzie di assistenza o riparazione senza previo colloquio con Horizon. Questo vale anche per le riparazioni in garanzia. Quindi in tale casi bisogna interpellare un rivendi-
tore, che si metter in contatto subito con Horizon per prendere una decisione che vi possa aiutare nel pi breve tempo possibile. Manutenzione e riparazione Se il prodotto deve essere ispezionato o riparato, si prega di rivolgersi ad un rivenditore specializzato o direttamente ad Horizon. Il prodotto deve es-
sere Imballato con cura. Bisogna far notare che i box originali solitamente non sono adatti per effettuare una spedizione senza subire alcun danno. Bisogna effettuare una spedizione via corriere che fornisce una tracciabilit e unassicurazione, in quanto Horizon non si assume alcuna responsabilit in relazione alla spedizione del prodotto. Inserire il prodotto in una busta assieme ad una descrizione dettagliata degli errori e ad una lista di tutti i singoli compo-
nenti spediti. Inoltre abbiasmo bisogno di un indirizzo completo, di un numnero di telefono per chiedere ulteriori domande e di un indirizzo e-mail. Garanzia a riparazione Le richieste in garanzia verranno elaborate solo se presente una prova dacquisto in originale proveniente da un rivenditore specializzato autorizzato, nella quale ben visibile la data di acquisto. Se la garanzia viene confermata, allora il prodotto verr riparato o sostituito. Questa decisione spetta esclusiva-
mente a Horizon Hobby. Iparazioni a pagamento Se bisogna effettuare una riparazione a pagamento, effettueremo un preventivo che verr inoltrato al vostro rivenditore. La riparazione verr effettuata dopo lautorizzazione da parte del vostro rivenditore. La somma per la riparazione dovr essere pagata al vostro rivenditore. Le riparazioni a pagamento avranno un costo minimo di 30 minuti di lavoro e in fattura includeranno le spese di restituzione. Qualsiasi riparazione non pagata e non richiesta entro 90 giorni verr considerata abbandonata e verr gestita di conseguenza. 4848 IT ATTENZIONE: Le riparazioni a pagamento sono disponibili solo sullelettronica e sui motori. Le riparazioni a livello meccanico, soprattutto per gli elicotteri e le vetture RC sono molto costose e devono essere effettuate autonomamente dallacquirente. Garanzia e assistenza informazioni per i contatti Stato di acquisto EU Horizon Hobby Indirizzo Telefono/Indi-
rizzo e-mail Horizon Technischer Service service@horizonhobby.eu Sales: Horizon Hobby GmbH
+49 (0) 4121 2655 100 Hanskampring 9 D 22885 Barsbttel, Germany 4949 IT INFORMAZIONI SULLA CONFORMIT PER LUNIONE EUROPEA Dichiarazione di Conformit EU: Horizon Hobby, LLC con la presente dichiara che il prodotto conforme ai requisiti essenziali e ad altre disposizioni rilevanti della direttiva RED. Una copia della dichiarazione di conformit per lUnione Europea disponibile a:
http://www.horizonhobby.com/content/support-render-compliance. Smaltimento allinterno dellUnione Europea Questo prodotto non deve essere smaltito assieme ai rifiuti domestici. Invece responsabilit dellutente lo smaltimento di tali rifiuti, che devono essere portati in un centro di raccolta designato per il riciclaggio di rifiuti elettronici. Con tale procedimento si aiuter preservare lambiente e le risorse non verranno sprecate. In questo modo si protegger il benessere dellumanit. Per maggiori informazioni sui punti di riciclaggio si prega di contattare il proprio ufficio locale o il servizio di smaltimento rifiuti. 5050 IT 5151 SRS4210 | AR636H | SRS4200 | SRS4201 42673.3 Updated 08/17 2017 Horizon Hobby, Inc. DSM, DSM2, DSMR, Active Vehicle Control, AVC and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, Inc. The Spektrum trademark is used with permission of Bachmann Industries, Inc. Patents pending.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-10-05 | 2404 ~ 2476 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2017-10-05
|
||||
1 | Applicant's complete, legal business name |
Horizon Hobby, LLC
|
||||
1 | FCC Registration Number (FRN) |
0006301931
|
||||
1 | Physical Address |
2904 Research Rd.
|
||||
1 |
Champaign, Illinois 61821
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@micomlabs.com
|
||||
1 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BRW
|
||||
1 | Equipment Product Code |
DASRX12
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
C**** D********
|
||||
1 | Title |
President and EVP Product Management and Marketing
|
||||
1 | Telephone Number |
217-4********
|
||||
1 | Fax Number |
217-4********
|
||||
1 |
c******@horizonhobby.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
CENTRE OF TESTING SERVICE CO., LTD.
|
||||
1 | Name |
V**** Y******
|
||||
1 | Physical Address |
A101, No.65, Zhuji Highway, Tianhe District
|
||||
1 |
Guangdong
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
86-20********
|
||||
1 |
c******@cts-lab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Receiver | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Centre of Testing service Co., Ltd
|
||||
1 | Name |
V******** Y******
|
||||
1 | Telephone Number |
86-20********
|
||||
1 | Fax Number |
86-20********
|
||||
1 |
v******@cts-lab.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 20 | 2404.00000000 | 2476.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC