all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.05 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User Manual | Users Manual | 1.05 MiB |
English High Speed Digital Servo with built in DSMR receiver Instruction Manual | Bedienungsanleitung | Manuel dutilisation | Manuale di istruzioni SPMSS6240Rx notice Binding Receiver to transmitter All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com and click on the support tab for this product. Meaning of Special Language The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:
notice: Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no possibility of injury. caUtion: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury. WaRninG: Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high probability of superficial injury. WaRninG: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not in-
tended for use by children without direct adult supervision. Do not attempt disassembly, use with incompatible components or augment product in any way without the approval of Horizon Hobby, LLC. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury. age Recommendation: not for children under 14 years. this is not a toy. WaRninG aGainSt coUnteRfeit pRoDUctS Always purchase from a Horizon Hobby, LLC authorized dealer to ensure authentic high-quality Spektrum product. Horizon Hobby, LLC disclaims all support and warranty with regards, but not limited to, compatibility and performance of counterfeit products or products claiming compatibility with DSM or Spektrum technology. notice: This product is only intended for use with unmanned, hobby-grade, remote-controlled vehicles and aircraft. Horizon Hobby disclaims all liability outside of the intended purpose and will not provide warranty service related thereto. WaRRantY ReGiStRation Visit www.spektrumrc.com/registration today to register your product. S6240Rx High Speed Digital Servo/Receiver The Spektrum S6240Rx High Speed Digital Servo with built in DSMR receiver is compatible with all Spektrum DSMR transmitters and is also backwards compatible with DSM2 transmitters. The S6240Rx offers metal gears and insane speed and torque @ 6V. SpecificationS S6240Rx Type Dimensions
(LxWxH) Weight Voltage Torque Speed Spline Count Gear Type Antenna Length Channels Band High Speed, Digital Servo with DSMR Receiver 41 x 20.9 x 31.6mm 56 g 6V 208 oz-in (15.0kg-cm)
@ 6V 0.08 sec/60 deg @ 6V 23 teeth Metal 3.66 in 2 2.4GHz installation instructions A: 23 tooth metal spline B: Metal case C: Antenna D: Bind Port E: Bind Plug F: Throttle Port A B D F C E Install the servo using the appropriate fasteners included with your vehicle. Properly adjust the steering linkages and transmitter travel values to prevent servo damage. The S6240Rx can be used with up to 6v receiver battery packs. Mount the antenna up and away from the vehicle in the included antenna tube. The higher up the antenna is, the better signal it will receive. notice: Do not cut or modify the antenna. In order to operate, the receiver must be bound to the transmitter. Binding is the process of programming the receiver to recognize the GUID (Globally Unique Identifier) code of a single specific transmitter. When areceiver is bound to atransmitter/model memory, the receiver will only respond to that specific transmitter/model memory. Binding the S6240Rx with a separate receiver pack 1. With the S6240Rx off, insert the bind plug into the BIND port of the Servo. 2. 3. 4. Temporarily Power the S6240Rx through the Throttle Port. The orange LED will flash continuously, indicating that the receiver is in bind mode. With the throttle channel in the desired preset failsafe position (normally neutral), put your transmitter in bind mode. Continue holding the failsafe position until the binding process is complete. The bind process is complete when the orange LED on the S6240Rx is solid. Remove the bind plug from the S6240Rx and store it in a convenient place. Failure to remove the bind plug will result in the receiver entering bind mode the next time you power on the receiver. Unpug the battery from the Throttle Port and install the Throttle servo. Power the S6240Rx through the Bind Port. 7. 8. powering the S6240Rx with a separate receiver pack 5. 6. Steering Servo/
Receiver Throttle Servo Battery Binding the S6240Rx with an eSc 1. With the S6240Rx off, insert the bind plug into the BIND port of the Servo. Connect the ESC lead to the throttle channel port and power up the ESC. 2. The orange LED will flash continuously, indicating that the receiver is in bind mode. 3. With the throttle channel in the desired preset failsafe position (normally neutral), put your 4. transmitter in bind mode. Continue holding the failsafe position until the binding process is complete. The bind process is complete when the orange LED on the S6240Rx is solid. Remove the bind plug from the S6240Rx and store it in a convenient place. Failure to remove the bind plug will result in the receiver entering bind mode the next time you power on the receiver. 5. 6. powering the S6240Rx with an eSc Battery To Motor Steering Servo/
Receiver Electronic Speed Control notice: You must rebind the transmitter and S6240Rx if you:
change the servo reverse after binding. want to use the S6240Rx with a different model memory. are using the receiver with a DSMR transmitter and you change the frame rate in the transmitter. failsafe The throttle failsafe position is set during binding. In the unlikely event that the radio link is lost during use, the receiver will drive the throttle channel to its pre-programmed failsafe position
(normally neutral or full brakes). If the receiver is powered on prior to turning on the transmitter, the receiver will enter the failsafe mode, driving the throttle channel to its preset failsafe position. When the transmitter is turned on, normal control is resumed. iMpoRtant: Failsafe activates only in the event that signal is lost from the transmitter. Failsafe will NOT activate in the event that receiver battery power decreases below the recommended minimums or power to the receiver is lost. 2.4GHz troubleshooting Guide Problem Possible Cause Your transmitter and receiver are The system will not connect too close together Solution Move transmitter 1 to 3 meters from receiver You are around metal objects Move to an area with less metal The receiver is not bound to the active model memory Check model selected and ensure you are bound to that model Your transmitter was accidentally put into bind mode and is no longer bound to your receiver Check the receiver antenna to be sure it is not cut or damaged Inadequate battery voltage The receiver goes into failsafe mode a short distance away from the transmitter The receiver stops responding during operation Loose or damaged wires or connectors between battery and receiver Rebind your transmitter and receiver Replace the receiver or contact Horizon Product Support Make sure your receiver antenna is in an antenna tube and is above the vehicle Charge or replace the receiver batteries. Spektrum receivers require at least 3.5V to operate (We recommend using a 6V receiver pack). An inadequate power supply can allow voltage to momentarily drop below 3.5V and cause the receiver to brown out and reconnect Check the wires and connection between the battery and receiver. Repair or replace wires and/or connectors 1-Year Limited Warranty What this Warranty covers - Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product purchased (the Product) will be free from defects in materials and workmanship for a period of 1 year from the date of purchase. What is not covered This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modification of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer, (vi) Product not compliant with applicable technical regulations, or (vii) use that violates any applicable laws, rules, or regulations. OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASERS INTENDED USE. purchasers Remedy Horizons sole obligation and purchasers sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASERS SOLE AND EXCLUSIVE REMEDY. Limitation of Liability HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase. Law These terms are governed by Illinois law (without regard to conflict of law principals). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice. WaRRantY SeRViceS Questions, assistance, and Services Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call the toll free telephone number referenced in the Warranty and Service Contact Information section to speak with a Product Support representative. inspection or Services If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby.com/
content/service-center_render-service-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton. notice: Do not ship Lipo batteries to Horizon. if you have any issue with a Lipo battery, please contact the appropriate Horizon product Support office. Warranty Requirements For Warranty consideration, you must include your original sales receipt verifying the proof-
of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon. non-Warranty Service Should your service not be covered by warranty, service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashiers checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizons Terms and Conditions found on our website http://
www.horizonhobby.com/content/service-center_ render-service-center. attention: Horizon service is limited to product compliant in the country of use and ownership. if received, a non-
compliant product will not be serviced. further, the sender will be responsible for arranging return shipment of the un-serviced product, through a carrier of the senders choice and at the senders expense. Horizon will hold non-compliant product for a period of 60 days from notification, after which it will be discarded. Warranty and Service contact information Country of Purchase Horizon Hobby Contact Information Address Horizon Service Center
(Repairs and Repair Requests) servicecenter.horizonhobby.com/
RequestForm/
United States of America Horizon Product Support
(Product Technical Assistance) Sales United Kingdom Service/Parts/Sales:
Horizon Hobby Limited productsupport@horizonhobby.com. 877-504-0233 websales@horizonhobby.com 800-338-4639 sales@horizonhobby.co.uk
+44 (0) 1279 641 097 4105 Fieldstone Rd Champaign, Illinois, 61822 USA Units 14, Ployters Rd, Staple Tye, Harlow Essex, CM18 7NS United Kingdom Germany France Horizon Technischer Service service@horizonhobby.de Sales: Horizon Hobby GmbH
+49 (0) 4121 2655 100 Christian-Junge-Strae 1 25337 Elmshorn, Germany Service/Parts/Sales:
Horizon Hobby SAS infofrance@horizonhobby.com
+33 (0) 1 60 18 34 90 11 Rue Georges Charpak 77127 Lieusaint, France fcc information- fcc iD: BRWSpMSS6240Rx This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. notice: Modifications to this product will void the users authority to operate this equipment. This product contains a radio transmitter with wireless technology which has been tested and found to be compliant with the applicable regulations governing a radio transmitter in the 2.400GHz to 2.4835GHz frequency range. ic information- ic: 6157a-SpMSS6240Rx This device complies with Industry Canada license-
exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, Including interference that may cause undesired operation of the device. compliance information for the european Union Horizon Hobby, LLC hereby declares that this product is in compliance with the essential requirements and other relevant provisions of the RED Directive. A copy of the EU Declara-
tion of Conformity is available online at:
http://www.horizonhobby.com/content/support-render-compliance. instructions for Disposal of Weee by Users in the european Union This product must not be disposed of with other waste. Instead, it is the usersresponsibility to dispose of their waste equipment by handing it over to adesignated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in amanner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or where you purchased the product. 2017 Horizon Hobby, LLC. DSM2, DSMR and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. Created 11/16 | 53016 dEutsch High Speed Digital Servo with built in DSMR receiver Instruction Manual | Bedienungsanleitung | Manuel dutilisation | Manuale di istruzioni SPMSS6240Rx HinWeiS empfnger am Sender binden Alle Anweisungen, Garantien und anderen zugehrigen Dokumente knnen im eigenen Ermessen von Horizon Hobby, LLC jederzeit gendert werden. Die aktuelle Produktliteratur finden Sie auf horizonhobby.com unter der Registerkarte Support fr das betreffende Produkt. Meaning of Special Language Die folgenden Begriffe werden in der gesamten Produktliteratur verwendet, um auf unterschied-
lich hohe Gefahrenrisiken beim Betrieb dieses Produkts hinzuweisen:
HinWeiS: Wenn diese Verfahren nicht korrekt befolgt werden, knnen sich mglicherweise Sachschden UND eine geringe oder keine Gefahr von Verletzungen ergeben. acHtUnG: Wenn diese Verfahren nicht korrekt befolgt werden, ergeben sich wahrscheinlich Sachschden UND die Gefahr von schweren Verletzungen. WaRnUnG: Wenn diese Verfahren nicht korrekt befolgt werden, ergeben sich wahrscheinlich Sachschden, Kollateralschden und schwere Verletzungen ODER mit hoher Wahrscheinlichkeit oberflchliche Verletzungen. WaRnUnG: Lesen Sie die GESAMTE Bedienungsanleitung durch, um sich vor der Inbetriebnahme mit den Funktionen des Produkts vertraut zu machen. Wird dieses Produkt nicht korrekt betrieben, kann dies zu Schden am Produkt oder anderen Sachschden und zu schweren Verletzungen fhren. Dies ist ein hochentwickeltes Hobbyprodukt und KEIN Spielzeug. Es muss mit Vorsicht und gesundem Menschenverstand betrieben werden und erfordert gewisse technische Grundfhig-
keiten. Wird dieses Produkt nicht auf eine sichere und verantwortungsvolle Weise betrieben, kann dies zu Verletzungen oder Schden am Produkt oder anderen Sachwerten fhren. Dieses Produkt eignet sich nicht fr die Verwendung durch Kinder ohne direkte berwachung eines Erwachsenen. Versuchen Sie nicht ohne Genehmigung durch Horizon Hobby, LLC, das Produkt zu zerlegen, es mit inkompatiblen Komponenten zu verwenden oder auf jegliche Weise zu erweitern. Diese Bedienungsanleitung enthlt Anweisungen fr Sicherheit, Betrieb und Wartung. Es ist unbedingt notwendig, vor Zusammenbau, Einrichtung oder Verwendung alle Anweisungen und Warnhinweise im Handbuch zu lesen und zu befolgen, damit das Produkt bestimmungs-
age Recommendation: not for children under 14 years. this is not a toy. gem betrieben werden kann und Schden oder schwere Verletzungen vermieden werden. WaRnUnG zU GefLScHten pRoDUkten Bitte kaufen Sie Ihre Spektrum Produkte immer von einem autorisiertem Hndler um sicherzu stellen, dass Sie ein authentisches hochqualitatives original Spektrum Produkt gekauft haben. Hori-
zon Hobby lehnt jede Untersttzung, Service oder Garantieleistung von geflschten Produkten oder Produkten ab die von sich in Anspruch nehmen kompatibel mit Spektrum oder DSM zu sein. HinWeiS: Dieses Produkt ist ausschlielich fr die Verwendung in unbemanten, ferngesteuerten Fahrzeugen und Fluggerten im Hobbybereich vorgese-hen. Horizon Hobby lehnt jede Haftung und Garantieleistung ausserhalb der vorgesehen Verwendung ab. GaRantie ReGiStRieRUnG Registrieren Sie bitte Ihr Produkt unter www.spektrumrc.com/registration. S6240Rx digitaler Hochgeschwindigkeits-Servo/empfnger Der Spektrum S6240Rx digitale Hochgeschwindigkeits-Servo mit integriertem DSMR-Empfnger ist mit allen Spektrum DSMR-Sendern kompatibel und ist auerdem mit den DSM2-Sender abwrts kompatibel. Der S6240Rx bietet Metallgetriebe und eine unglaubliche Geschwindigkeit und Drehmoment bei 6V. 5. 6. Fr den Betrieb mu der Empfnger an den Sender gebunden werden. Binden ist der Prozess der Programmierung des Empfngers mit dem eindeutigen Signal eines spezifischen Senders (GUID) ist der Empfnger an den Sender gebunden wird nur er auf die Signale des Senders reagieren. S6240Rx mit einem separaten empfngerpaket binden 1. Bei ausgeschaltetem S6240Rx den Bindungsstecker in den Bindungsanschluss des Servos stecken. S6240Rx vorbergehend ber den Gasanschluss betreiben. The orange LED will flash continuously, indicating that the receiver is in bind mode. Mit dem Gaskanal in der gewnschten, voreinstellten Failsafe-Position (normalerweise neutral) den Sender in den Bindungsmodus bringen. Behalten Sie die Failsafe-Stellung bei, bis der Kopplungsvorgang abgeschlossen ist. Der Bindungsvorgang ist abgeschlossen, wenn die orange LED auf dem S6240Rx durchgngig leuchtet. Den Bindungsstecker vom S6240Rx entfernen und an einem geeigneten Standort lagern. Wird der Bindungsstecker nicht entfernt, so wird der Empfnger in den Bindungsmodus bergehen, wenn er das nchste Mal eingeschaltet wird. Den Akku vom Gasanschluss trennen und den Gasservo montieren. S6240Rx ber den Bindungsanschluss betreiben. 2. 3. 4. 5. 6. 7. 8. S6240Rx mit einem separaten empfngerpaket betreiben Lenkservo/
Empfnger Gasservo Batterie S6240Rx mit einem Geschwindigkeitsregler binden 1. Bei ausgeschaltetem S6240Rx den Bindungsstecker in den Bindungsanschluss des Servos stecken. Die Leitung des Geschwindigkeitsreglers mit dem Gaskanalanschluss verbinden und den Geschwindigkeitsregler einschalten. Die orangefarbene LED blinkt kontinuierlich und zeigt an, dass der Receiver im Kopplungsmodus ist. 2. 3. 4. Mit dem Gaskanal in der gewnschten, voreinstellten Failsafe-Position (normalerweise neutral) den Sender in den Bindungsmodus bringen. Behalten Sie die Failsafe-Stellung bei, bis der Kopplungsvorgang abgeschlossen ist. Der Bindungsvorgang ist abgeschlossen, wenn die orange LED auf dem S6240Rx durchgngig leuchtet. Den Bindungsstecker vom S6240Rx entfernen und an einem geeigneten Standort lagern. Wird der Bindungsstecker nicht entfernt, so wird der Empfnger in den Bindungsmodus bergehen, wenn er das nchste Mal eingeschaltet wird. S6240Rx Digitaler Hochgeschwindigkeits-
Servo mit integriertem DSMR-Empfnger 41 x 20,9 x 31,6mm 56 g 6V 15,0kg/cm (208 Unzen/
Zoll) bei 6V 0,08 s/60 bei 6V 23Zhne Metall 9,3cm (3,66 Zoll) 2 2.4GHz SpecificationS Typ:
Abmessungen
(L x B x H) Gewicht Spannung Drehmoment Geschwindigkeit Verzahnung Getriebeart Antennenlnge Kanle Band einbauanleitung A: 23-zhnige Metallverzahnung B: Metallgehuse C: Antenne D: Bindungsanschluss E: Bindungsstecker F: Gasanschluss A B D F C E Montieren Sie das Servo mit dem im Lieferumfang des Fahrzeuges enthaltenen Befestigungen. Justieren Sie das Lenkgestnge und die senderseitige Servowegeinstellung um Beschdigungen am Servo zu vermeiden. Der S6240Rx kann mit Empfnger-Akkupaketen von bis zu 6V verwendet werden. Die Antenne sollte nach oben zeigend montiert werden. Je hher die Antenne ist, desto besser ist die Empfangsleistung. Hinweis: Krzen oder modifizieren sich nicht die Antenne. S6240Rx mit einem Geschwindigkeitsregler betreiben Batterie Zum Motor Lenkservo/
Empfnger Elektrischer Geschwindigkeitsregler notice: Sie mssen den Sender und Empfnger neu binden wenn:
Sie die Servolaufrichtung nach dem Binden gendert haben. Sie einen Empfnger mit anderem Modellspeicher verwenden. Sie einen Empfnger mit DSMR Sender verwenden und die Pulsrate ndern. failsafe Die Failsafe-Positionen werden whrend des Bindungsprozess eingestellt. Fr den unwahrschein-
lichen Fall, dass die Funkverbindung whrend des Betriebs abreit, fhrt der Empfnger die Servos in ihre vorprogrammierten Failsafe- Positionen (in der Regel volle Bremse und Lenkung geradeaus). Wird der Empfnger vor dem Sender eingeschaltet, wechselt er in die Failsafe- Be-
triebsart und fhrt die Servos an ihre vordefinierten Failsafe- Positionen. Wird dann der Sender eingeschaltet, haben Sie wieder volle Kontrolle ber das Modell. WicHtiG: Die Failsafefunktion wird nur bei Signalverlust aktiv. Sie wird NICHT aktiv wenn die Spannung des Empfngerakkus unter die zulssige Grenze sinkt oder der Akku ausfllt. wird, um eine sachgerechte Entscheidung zu fllen, die Ihnen schnellst mglich hilft. Wartung und Reparatur Muss Ihr Produkt gewartet oder repariert werden, wenden Sie sich entweder an Ihren Fachhndler oder direkt an Horizon. Rcksendungen/Reparaturen werden nur mit einer von Horizon vergebenen RMA Nummer bearbeitet. Diese Nummer erhalten Sie oder ihr Fachhndler vom technischen Service. Mehr Informationen dazu erhalten Sie im Serviceportal unter www. Horizonhobby.de oder telefonisch bei dem technischen Service von Horizon. Packen Sie das Produkt sorgfltig ein. Beachten Sie, dass der Originalkarton in der Regel nicht ausreicht, um beim Versand nicht beschdigt zu werden. Verwenden Sie einen Paketdienstleister mit einer Tracking Funktion und Versicherung, da Horizon bis zur Annahme keine Verantwortung fr den Versand des Pro-
duktes bernimmt. Bitte legen Sie dem Produkt einen Kaufbeleg bei, sowie eine ausfhrliche Fehlerbeschreibung und eine Liste aller eingesendeten Einzelkomponenten. Weiterhin bentigen wir die vollstndige Adresse, eine Telefonnummer fr Rckfragen, sowie eine Email Adresse. Garantie und Reparaturen Garantieanfragen werden nur bearbeitet, wenn ein Originalkaufbeleg von einem autorisierten Fachhndler beiliegt, aus dem der Kufer und das Kaufdatum hervorgeht. Sollte sich ein Garantiefall besttigen wird das Produkt repariert oder ersetzt. Diese Entscheidung obliegt einzig Horizon Hobby. 5-14-2015 Garantie und Service KontaKtinformationen Land des kauf Horizon Hobby adresse telefon/e-mail adresse Deutschland Horizon Technischer Service Christian-Junge-Strae 1 25337 Elmshorn Germany
+49 (0) 4121 2655 100 service@horizonhobby.de rechtliche informationen fr die europiSche union Horizon LLC erklrt hiermit, dass dieses Produkt konform zu den essentiellen Anforderungen der RED Direktive ist. Eine Kopie der Konformittserklrung ist online unter folgender Adresse verfgbar:
http://www.horizonhobby.com/content/support-render-compliance. entsorgung in der europischen Union Dieses Produkt darf nicht ber den Hausmll entsorgt werden. Es ist die Verantwortung des Benutzers, dass Produkt an einer registrierten Sammelstelle fr Elektroschrott abzugeben diese Verfahren stellt sicher, dass die Umwelt geschont wird und natrliche Ressourcen nicht ber die Gebhr beansprucht werden. Dadurch wird das Wohlergehen der menschlichen Gemeinschaft geschtzt. Fr weitere Informationen, wo der Elektromll entsorgt werden kann, knnen Sie Ihr Stadtbro oder Ihren lokalen Entsorger kontaktieren. 2,4GHz fehlersuchanleitung problem Das System will sich nicht verbinden Mgliche Ursache Sender und Empfnger sind zu nah zusammen Metallische Objekte in der Nhe Lsung Bewegen Sie den Sender 2,5 - 3 Meter vom Empfnger weg Entfernen Sie sich von den metallis-
che Objekten Der Empfnger ist an einen ande-
ren Modellspeicher gebunden Whlen Sie den richtigen Modell-
speicher Der Empfnger geht nach kurzer Distanz in den Failsafemode Der Empfnger reagiert nicht mehr Der Bindevorgang wurde bei dem Sender aktiviert, der Empfnger ist nicht mehr gebunden Prfen Sie die Antenne auf Besch-
digung Empfngerakkuspannung zu niedrig Ist die Akkuspannung zu niedrig und unter zeitweise unter 3,5 Volt fllt, fhrt diese zu Empfangsunterbre-
chung und Neuverbindung Binden Sie den Sender und Empfnger Die Antenne mu sich im Anten-
nenrhrchen und berhalb des Fahrzeuges befinden Ersetzen Sie den Empfnger oder kontaktieren den technischen Service von Horizon Hobby Laden Sie den Empfnger oder Fahrzeugakku. Spektrumempfnger bentigen min-
destens 3,5 Volt Betriebsspannung Lose oder beschdigte Kabel/Verbinder zwischen Akku und Empfnger berprfen Sie die Kabel und Verbinder zwischen Akku und Em-
pfnger. Reparieren oder ersetzen Sie Kabel oder Verbinder Garantie und Service informationen Garantiezeitraum Exklusive Garantie Horizon Hobby LLC (Horizon) garantiert, dass das gekaufte Produkt frei von Material- und Montagefehlern ist. Der Garantiezeitraum entspricht den gesetzlichen Bestimmung des Landes, in dem das Produkt erworben wurde. In Deutschland betrgt der Garantiezeitraum 6 Monate und der Gewhrleistungszeitraum 18 Monate nach dem Garantiezeitraum. einschrnkungen der Garantie
(a) Die Garantie wird nur dem Erstkufer
(Kufer) gewhrt und kann nicht bertragen werden. Der Anspruch des Kufers besteht in der Reparatur oder dem Tausch im Rahmen dieser Garantie. Die Garantie erstreckt sich ausschlielich auf Produkte, die bei einem autorisierten Horizon Hndler erworben wurden. Verkufe an dritte werden von dieser Garantie nicht gedeckt. Garantieansprche werden nur angenommen, wenn ein gltiger Kaufnachweis erbracht wird. Horizon behlt sich das Recht vor, diese Garantiebestimmungen ohne Ankndigung zu ndern oder modifizieren und widerruft dann bestehende Garantiebestimmungen.
(b) Horizon bernimmt keine Garantie fr die Verkaufbarkeit des Produktes, die Fhigkeiten und die Fitness des Verbrauchers fr einen bestimmten Einsatzzweck des Produktes. Der Kufer allein ist dafr verantwortlich, zu prfen, ob das Produkt seinen Fhigkeiten und dem vorgesehenen Einsatzzweck entspricht.
(c) Ansprche des Kufers Es liegt ausschlie-
lich im Ermessen von Horizon, ob das Produkt, bei dem ein Garantiefall festgestellt wurde, repariert oder ausgetauscht wird. Dies sind die exklusiven Ansprche des Kufers, wenn ein Defekt festgestellt wird. Horizon behlt sich vor, alle eingesetzten Komponenten zu prfen, die in den Garantiefall einbezogen werden knnen. Die Entscheidung zur Reparatur oder zum Austausch liegt nur bei Horizon. Die Garantie schliet kosmetische De-
fekte oder Defekte, hervorgerufen durch hhere Gewalt, falsche Behandlung des Produktes, falscher Einsatz des Produktes, kommerziellen Einsatz oder Modifikationen irgendwelcher Art aus. Die Garantie schliet Schden, die durch falschen Einbau, falsche Handhabung, Unflle, Betrieb, Service oder Reparaturversuche, die nicht von Horizon ausgefhrt wurden aus. Rcksendungen durch den Kufer direkt an Horizon oder eine seiner Landesvertretung bedrfen der Schriftform. Schadensbeschrnkung Horizon ist nicht fr direkte oder indirekte Fol-
geschden, Einkommensausflle oder kommer-
zielle Verluste, die in irgendeinem Zusammen-
hang mit dem Produkt stehen verantwortlich, unabhngig ab ein Anspruch im Zusammen-
hang mit einem Vertrag, der Garantie oder der Gewhrleistung erhoben werden. Horizon wird darber hinaus keine Ansprche aus einem Garantiefall akzeptieren, die ber den individuellen Wert des Produktes hinaus gehen. Horizon hat keinen Einfluss auf den Einbau, die Verwendung oder die Wartung des Produktes oder etwaiger Produktkombinationen, die vom Kufer gewhlt werden. Horizon bernimmt keine Garantie und akzeptiert keine Ansprche fr in der folge auftretende Verletzungen oder Beschdigungen. Mit der Verwendung und dem Einbau des Produktes akzeptiert der Kufer alle aufgefhrten Garantiebestimmungen ohne Einschrnkungen und Vorbehalte. Wenn Sie als Kufer nicht bereit sind, diese Bestimmungen im Zusammenhang mit der Benutzung des Produktes zu akzeptieren, wer-
den Sie gebeten, dass Produkt in unbenutztem Zustand in der Originalverpackung vollstndig bei dem Verkufer zurckzugeben. Sicherheitshinweise Dieses ist ein hochwertiges Hobby Produkt und kein Spielzeug. Es muss mit Vorsicht und Umsicht eingesetzt werden und erfordert einige mechanische wie auch mentale Fhigkei-
ten. Ein Versagen, das Produkt sicher und umsichtig zu betreiben kann zu Verletzungen von Lebewesen und Sachbeschdigungen erheblichen Ausmaes fhren. Dieses Produkt ist nicht fr den Gebrauch durch Kinder ohne die Aufsicht eines Erziehungsberechtigten vorgesehen. Die Anleitung enthlt Sicherheit-
shinweise und Vorschriften sowie Hinweise fr die Wartung und den Betrieb des Produktes. Es ist unabdingbar, diese Hinweise vor der ersten Inbetriebnahme zu lesen und zu verstehen. Nur so kann der falsche Umgang verhindert und Unflle mit Verletzungen und Beschdigungen vermieden werden. fragen, Hilfe und Reparaturen Ihr lokaler Fachhndler und die Verkaufs-
telle knnen eine Garantiebeurteilung ohne Rcksprache mit Horizon nicht durchfhren. Dies gilt auch fr Garantiereparaturen. Deshalb kontaktieren Sie in einem solchen Fall den Hndler, der sich mit Horizon kurz schlieen 2017 Horizon Hobby, LLC. DSM2, DSMR and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. Created 11/16 | 53016 franais High Speed Digital Servo with built in DSMR receiver Instruction Manual | Bedienungsanleitung | Manuel dutilisation | Manuale di istruzioni SPMSS6240Rx ReMaRQUe affectation du rcepteur lmetteur La totalit des instructions, garanties et autres documents est sujette modification la seule discrtion dHorizon Hobby, LLC. Pour obtenir la documentation jour, rendez-vous sur le site www.horizonhobby.com et cliquez sur longlet de support de ce produit. Signification de certains termes spcifiques Les termes suivants sont utiliss dans lensemble du manuel pour indiquer diffrents niveaux de danger lors de lutilisation de ce produit:
ReMaRQUe: procdures qui, si elles ne sont pas suivies correctement, peuvent entraner des dgts matriels ET potentiellement un risque faible de blessures. attention: procdures qui, si elles ne sont pas suivies correctement, peuvent entraner des dgts matriels ET des blessures graves. aVeRtiSSeMent: procdures qui, si elles ne sont pas suivies correctement, peuvent entraner des dgts matriels et des blessures graves OU engendrer une probabilit leve de blessure superficielle. aVeRtiSSeMent: lisez la TOTALIT du manuel dutilisation afin de vous familiariser avec les caractristiques du produit avant de le faire fonctionner. Une utilisation incorrecte du produit peut entraner lendommagement du produit lui-mme, ainsi que des risques de dgts matriels, voire de blessures graves. Ceci est un produit de loisirs sophistiqu. Il doit tre manipul avec prudence et bon sens et requiert des aptitudes de base en mcanique. Toute utilisation de ce produit ne respectant pas les principes de scurit et de responsabilit peut entraner des dgts matriels, endommager le produit et provoquer des blessures. Ce produit nest pas destin tre utilis par des enfants sans la surveillance directe dun adulte. Nessayez pas de dmonter le produit, de lutiliser avec des composants incompatibles ou den amliorer les performances sans laccord dHorizon Hobby, LLC. Ce manuel comporte des instructions relatives la scurit, au fonctionnement et lentretien. Il est capital de lire et de respecter toutes les instructions et tous les avertissements du manuel avant lassemblage, le rglage ou lutilisation afin de manipuler correctement lappareil et dviter tout dgt matriel ainsi que toute blessure grave. 14 ans et plus. ceci nest pas un jouet. attention aUx contRefaonS Nous vous remercions davoir achet un vritable produit Spektrum. Toujours acheter chez un revendeur officiel Horizon hobby pour tre sur davoir des produits authentiques. Horizon Hobby dcline toute garantie et responsabilit concernant les produits de contrefaon ou les produits se disant compatibles DSM ou Spektrum. ReMaRQUe: Ce produit est uniquement rserv une utilisation avec des modles rduits radiocommands de loisir. Horizon Hobby se dgage de toute responsabilit et garantie si le produit est utilis dautre manire que celle cite prcdemment. GaRantie et enReGiStReMent Veuillez visiter www.spektrumrc.com/registration pour enregistrer en ligne votre produit. Servo digital ultra rapide/Rcepteur S6240Rx Le servo digital ultra rapide Spektrum S6240Rx avec rcepteur DSMR intgr est compatible avec tous les metteurs Spektrum DSMR et est galement rtro-compatible avec les metteurs DSM2. Le S6240Rx est quip de pignons mtalliques et offre une incroyable vitesse et couple 6V. A: Mtal 23T B: Boitier mtallique C: Antenne D: Port affectation E: Prise affectation F: Port gaz caRactRiStiQUeS S6240Rx Type Dimensions (LxlxH) Masse Tension Couple Vitesse Nombre de dents Type de pignon Longueur de lantenne Voies Frquence Servo digital ultra rapide avec rcepteur DSMR 41 x 20.9 x 31.6mm 56 g 6V 208 oz-in (15.0kg-cm)
@ 6V 0.08 sec/60 deg @ 6V 23T Mtallique 9 cm 2 2.4GHz A B D F C E instructions dinstallation Installez le servo en utilisant les attaches fournies avec votre vhicule. Rglez correctement les les tringleries de direction et les courses sur lmetteur, pour viter tout dommage sur le servo. Le S6240Rx peut tre utilis avec une batterie rcepteur 6V maximum. Laffectation (ou Bind) est le processus consistant renseigner le rcepteur sur le code spcifique de lmetteur, appel identificateur unique global (GUID, Globally Unique Identifier), et mmoriser les valeurs de scurit intgre. Lorsquun rcepteur est affect un metteur/une mmoire de modle, il rpond uniquement cet metteur/cette mmoire de modle spcifique (voir Model-
Match pour plus dinformations). affectation du S6240Rx avec une batterie rcepteur spare 1. 2. 3. 4. Avec le S6240Rx hors tension, insrez la prise affectation dans le port affectation du servo. Alimentez temporairement le S6240Rx par le port gaz. La DEL orange clignotera continuellement, indiquant que le rcepteur est en mode affectation. Avec la voie des gaz sur sa position souhaite de failsafe (normalement au neutre), mettez votre metteur en mode affectation. Maintenez la position failsafe jusqu ce que la procdure daffectation soit termine. La procdure daffectation est termine lorsque la DEL orange du S6240Rx reste fixe. Retirez la prise affectation du S6240Rx et rangez-la soigneusement. Si vous ne retirez pas la prise affectation, le rcepteur entrera en mode affectation lors de la prochaine mise sous tension du rcepteur. Dbranchez la batterie du port gaz et installez le servo gaz. 7. 8. Mettez le S6240Rx sous tension via le port affectation. alimentation du S6240Rx avec une batterie rcepteur spare 5. 6. Servo direction/
Rcepteur Servo gaz Batterie affectation du S6240Rx avec un contrleur 1. 2. 3. 4. Avec le S6240Rx hors tension, insrez la prise affectation dans le port affectation du servo. Connectez le cble contrleur au port de la voie des gaz et mettez le contrleur sous tension. La DEL orange clignotera continuellement, indiquant que le rcepteur est en mode affectation. Avec la voie des gaz sur sa position souhaite de failsafe (normalement au neutre), mettez votre metteur en mode affectation. Maintenez la position failsafe jusqu ce que la procdure daffectation soit termine. La procdure daffectation est termine lorsque la DEL orange du S6240Rx reste fixe. Retirez la prise affectation du S6240Rx et rangez-la soigneusement. Si vous ne retirez pas la prise affectation, le rcepteur entrera en mode affectation lors de la prochaine mise sous tension du rcepteur. 5. 6. alimentation du S6240Rx avec un contrleur Batterie Vers le moteur Servo direction/
Rcepteur Contrleur notice: Vous devez raffecter lmetteur et le rcepteur quand:
Vous inversez la direction dune voie aprs laffectation Vous souhaitez utiliser le rcepteur avec diffrents modles programms dans votre metteur Vous utilisez le rcepteur avec un metteur DSMR et que vous changez son taux de rafrachissement. failsafe (Les positions de scurit intgre) Les positions de scurit intgre (failsafe) des gaz sont galement rgles lors de laffectation. Dans lhypothse peu probable dune perte de la liaison radio en cours dutilisation, le rcepteur ramne le servo des gaz sa position prprogramme de failsafe (freinage maximal normalement) et les sorties des autres voies sont dsactives. Si le rcepteur est mis sous tension avant lmetteur, il bascule en mode failsafe et place le servo des gaz dans la position de failsafe prrgle. Une fois que lmetteur est sous tension, les commandes reprennent leur fonctionnement normal. Installez lantenne en lorientant vers le haut et en lloignant du vhicule. Plus lantenne sera leve, meilleure la rception sera. ReMaRQUe: Ne coupez ou modifiez pas lantenne. iMpoRtant: Le Failsafe sactive uniquement en cas de perte du signal de lmetteur. Le failsafe nest PAS activ si la charge de la batterie du rcepteur est faible ou en cas de perte de puissance du rcepteur. Guide de dpannage 2.4GHz cause possible Solution problme Le systme ne se connecte pas Le rcepteur passe en mode failsafe une faible distance de lmetteur Lmetteur et le rcepteur sont trop proches lun de lautre Vous tes proximit dobjets mtalliques Le rcepteur est affect une autre mmoire de lmetteur Lmetteur a t replac en mode affectation et nest plus affect lmetteur Contrlez ltat de lantenne du rcepteur Le rcepteur ne rpond pas durant lutilisation Batterie de rception faible. Cbles abms ou dbranchs entre la batterie et le rcepteur loignez lmetteur du rcepteur dune distance denviron 2m Dplacez-vous dans une zone com-
portant moins dobjets mtalliques Assurez-vous que la mmoire slectionne correspond au modle utilis Raffectez votre metteur et votre rcepteur Assurez-vous que lantenne du rcepteur est bien dans un tube au plus haut du vhicule Remplacez le rcepteur ou con-
tactez le service technique Horizon Hobby Rechargez ou remplacez la batterie de rception. Les rcepteurs Spektrum ncessi-
tent une tension minimale de 3.5V Si la tension de la batterie est faible, la tension peut momentanment descendre sous 3.5V causant la dconnexion temporaire du rcepteur Contrlez ltat des cbles et rem-
placez-les sils sont endommags Garantie et rparations Dure de la garantie Garantie exclusive - Horizon Hobby, LLC.
(Horizon) garantit que le Produit achet (le Produit ) sera exempt de dfauts matriels et de fabrication sa date dachat par lAcheteur. La dure de garantie correspond aux dispositions lgales du pays dans lequel le produit a t acquis. La dure de garantie est de 6 mois et la dure dobligation de garantie de 18 mois lexpiration de la priode de garantie. Limitations de la garantie
(a) La garantie est donne lacheteur initial (
Acheteur ) et nest pas transfrable. Le recours de lacheteur consiste en la rparation ou en lchange dans le cadre de cette garantie. La garantie sapplique uniquement aux produits achets chez un revendeur Horizon agr. Les ventes faites des tiers ne sont pas couvertes par cette garantie. Les revendications en garantie seront acceptes sur fourniture dune preuve dachat valide uniquement. Horizon se rserve le droit de modifier les dispositions de la prsente garantie sans avis pralable et rvoque alors les dispositions de garantie existantes.
(b) Horizon nendosse aucune garantie quant la vendabilit du produit ou aux capacits et la forme physique de lutilisateur pour une utilisation donne du produit. Il est de la seule responsabilit de lacheteur de vrifier si le produit correspond ses capacits et lutilisation prvue.
(c) Recours de lacheteur Il est de la seule discrtion dHorizon de dterminer si un produit prsentant un cas de garantie sera rpar ou chang. Ce sont l les recours exclusifs de lacheteur lorsquun dfaut est constat. Horizon se rserve la possibilit de vrifier tous les lments utiliss et susceptibles dtre intgrs dans le cas de garantie. La dcision de rparer ou de remplacer le produit est du seul ressort dHorizon. La garantie exclut les dfauts esthtiques ou les dfauts provoqus par des cas de force majeure, une manipulation incorrecte du produit, une utilisation incorrecte ou commerciale de ce dernier ou encore des modifications de quelque nature quelles soient. La garantie ne couvre pas les dgts rsultant dun montage ou dune manipulation errons, daccidents ou encore du fonctionnement ainsi que des tentatives dentretien ou de rparation non effectues par Horizon. Les retours effectus par le fait de lacheteur directement Horizon ou lune de ses reprsentations nationales requirent une confirmation crite. Limitation des dgts Horizon ne saurait tre tenu pour responsable de dommages consquents directs ou indirects, de pertes de revenus ou de pertes commerciales, lis de quelque manire que ce soit au produit et ce, indpendamment du fait quun recours puisse tre formul en relation avec un contrat, la garantie ou lobligation de garantie. Par ailleurs, Horizon nacceptera pas de recours issus dun cas de garantie lorsque ces recours dpassent la valeur unitaire du produit. Horizon nexerce aucune influence sur le montage, lutilisation ou la maintenance du produit ou sur dventuelles combinaisons de produits choisies par lacheteur. Horizon ne prend en compte aucune garantie et naccepte aucun recours pour les blessures ou les dommages pouvant en rsulter. En utilisant et en montant le produit, lacheteur accepte sans restriction ni rserve toutes les dispositions relatives la garantie figurant dans le prsent document. Si vous ntes pas prt, en tant quacheteur, accepter ces dispositions en relation avec lutilisation du produit, nous vous demandons de restituer au vendeur le produit complet, non utilis et dans son emballage dorigine. indications relatives la scurit Ceci est un produit de loisirs perfectionn et non un jouet. Il doit tre utilis avec prcaution et bon sens et ncessite quelques aptitudes mcaniques ainsi que mentales. Lincapacit utiliser le produit de manire sre et raisonnable peut provoquer des blessures et des dgts matriels consquents. Ce produit nest pas destin tre utilis par des enfants sans la surveillance par un tuteur. La notice dutilisation contient des indications relatives la scurit ainsi que des indications concernant la maintenance et le fonctionnement du produit. Il est absolument indispensable de lire et de comprendre ces indications avant la premire mise en service. Cest uniquement ainsi quil sera possible dviter une manipulation errone et des accidents entranant des blessures et des dgts. Questions, assistance et rparations Votre revendeur spcialis local et le point de vente ne peuvent effectuer une estimation dligibilit lapplication de la garantie sans avoir consult Horizon. Cela vaut galement pour les rparations sous garantie. Vous voudrez bien, dans un tel cas, contacter le revendeur qui conviendra avec Horizon dune dcision approprie, destine vous aider le plus rapidement possible. Maintenance et rparation Si votre produit doit faire lobjet dune maintenance ou dune rparation, adressez-
vous soit votre revendeur spcialis, soit directement Horizon. Emballez le produit soigneusement. Veuillez noter que le carton demballage dorigine ne suffit pas, en rgle gnrale, protger le produit des dgts pouvant survenir pendant le transport. Faites appel un service de messagerie proposant une fonction de suivi et une assurance, puisque Horizon ne prend aucune responsabilit pour lexpdition du produit jusqu sa rception accepte. Veuillez joindre une preuve dachat, une description dtaille des dfauts ainsi quune liste de tous les lments distincts envoys. Nous avons de plus besoin dune adresse complte, dun numro de tlphone
(pour demander des renseignements) et dune adresse de courriel. Garantie et rparations Les demandes en garantie seront uniquement traites en prsence dune preuve dachat originale manant dun revendeur spcialis agr, sur laquelle figurent le nom de lacheteur ainsi que la date dachat. Si le cas de garantie est confirm, le produit sera rpar Cette dcision relve uniquement de Horizon Hobby. Rparations payantes En cas de rparation payante, nous tablissons un devis que nous transmettons votre revendeur. La rparation sera seulement effectue aprs que nous ayons reu la confirmation du revendeur. Le prix de la rparation devra tre acquitt au revendeur. Pour les rparations payantes, nous facturons au minimum 30 minutes de travail en atelier ainsi que les frais de rexpdition. En labsence dun accord pour la rparation dans un dlai de 90 jours, nous nous rservons la possibilit de dtruire le produit ou de lutiliser autrement. attention: nous neffectuons de rparations payantes que pour les composants lectroniques et les moteurs. Les rparations touchant la mcanique, en particulier celles des hlicoptres et des voitures radiocommandes, sont extrmement coteuses et doivent par consquent tre effectues par lacheteur lui-mme. coordonnes de Garantie et rparations Pays dachat Horizon Hobby Adresse Numro de tlphone/
E-mail France Horizon Hobby SAS 11 Rue Georges Charpak 77127 Lieusaint
+33 (0) 1 60 18 34 90 infofrance@horizonhobby.com ic information- ic: 6157a-SpMSS6240Rx Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radio-
lectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. informations de conformit pour lUnion europenne Dclaration de conformit de lUnion europenne : Horizon Hobby, LLC dclare par la prsente que ce produit est en conformit avec les exigences essentielles et les autres dispositions de la Directive RED. Une copie de la dclaration de conformit europenne est disponible :
http://www.horizonhobby.com/content/support-render-compliance. instructions relatives llimination des D3e pour les utilisateurs rsidant dans lUnion europenne Ce produit ne doit pas tre limin avec les ordures mnagres. Il est de la responsabilit de lutilisateur de remettre le produit un point de collecte officiel des dchets dquipements lectriques. Cette procdure permet de garantir le respect de lenvironnement et labsence de sollicitation excessive des ressources naturelles. Elle protge de plus le bien-tre de la commu-
naut humaine. Pour plus dinformations quant aux lieux dliminations des dchets dquipements lectriques, vous pouvez contacter votre mairie ou le service local de traitement des ordures mnagres. 2017 Horizon Hobby, LLC. DSM2, DSMR and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. Created 11/16 | 53016 italiano High Speed Digital Servo with built in DSMR receiver Instruction Manual | Bedienungsanleitung | Manuel dutilisation | Manuale di istruzioni SPMSS6240Rx aVViSo connessione ricevente e trasmittente (binding) Tutte le istruzioni, le garanzie e gli altri documenti pertinenti sono soggetti a cambiamenti a totale discrezione di Horizon Hobby, LLC. Per una documentazione aggiornata sul prodotto, visitare il sito horizonhobby.com e fare clic sulla sezione Support del prodotto. Significato dei termini usati Nella documentazione relativa al prodotto vengono utilizzati i seguenti termini per indicare i vari livelli di pericolo potenziale durante luso del prodotto:
aVViSo: indica procedure che, se non debitamente seguite, possono determinare il rischio di danni alle cose E il rischio minimo o nullo di lesioni alle persone. attenzione: indica procedure che, se non debitamente seguite, determinano il rischio di danni alle cose E di gravi lesioni alle persone. aVVeRtenza: indica procedure che, se non debitamente seguite, determinano il rischio di danni alle cose, danni collaterali e gravi lesioni alle persone o il rischio elevato di lesioni superficiali alle persone. aVVeRtenza: Leggere TUTTO il manuale di istruzioni e familiarizzare con le caratteri-
stiche del prodotto prima di farlo funzionare. Un uso improprio del prodotto pu causare danni al prodotto stesso e alle altre cose e gravi lesioni alle persone. Questo un prodotto sofisticato per appassionati di modellismo. Deve essere azionato in maniera attenta e responsabile e richiede alcune conoscenze basilari di meccanica. Luso improprio o irresponsabile di questo prodotto pu causare lesioni alle persone e danni al prodotto stesso o alle altre cose. Questo prodotto non deve essere utilizzato dai bambini senza la diretta supervisione di un adulto. Non tentare di smontare, utilizzare componenti incompa-
tibili o modificare il prodotto in nessun caso senza previa approvazione di Horizon Hobby, LLC. Questo manuale contiene le istruzioni per la sicurezza, luso e la manutenzione del prodotto. fondamentale leggere e seguire tutte le istruzioni e le avvertenze del manuale prima di montare, impostare o utilizzare il prodotto, al fine di utilizzarlo correttamente e di evitare di causare danni alle cose o gravi lesioni alle persone. almeno 14 anni. non un giocattolo. attenzione peR i pRoDotti contRaffatti: Raccomandiamo di acquistare sempre da rivenditori autorizzati Horizon per essere sicuri di avere un prodotto originale di alta qualit. Horizon rifiuta qualsiasi tipo di assistenza in garanzia di prodotti contraffatti o che dichiarano compatibilit con DSM o Spektrum. aVViSo: Questo prodotto rivolto esclusivamente a veicoli ed aerei di tipo hobbistico senza pilota a bordo e controllati a distanza. Al di fuori di questo utilizzo, Horizon Hobby declina ogni responsabilit e non riconosce interventi in garanzia. ReGiStRazione DeLLa GaRanzia Visitare oggi stesso il sito www.spektrumrc.com/registration per registrare il prodotto. Ricevente/Servo digitale alta velocit S6240Rx Il servo digitale ad alta velocit Spektrum S6240Rx con ricevente integrata DSMR. 5. 6. Questa procedura programma il ricevitore a riconoscere il numero unico GUID del suo trasmetti-
tore. Una volta connesso, il ricevitore risponder solo a quel trasmettitore. connessione S6240Rx con ricevente separata 1. 2. 3. 4. Con la S6240Rx spenta, inserire il connettore bind nella presa BIND del servo. Alimentare la S6240Rx temporaneamente tramite la presa sul throttle. Il LED arancione lampeggia continuamente, indicando che la ricevente in modalit Bind. Con il canale del motore nella posizione desiderata di failsafe preimpostata (di solito neutra), mettere la trasmittente in modalit Bind. Mantenere la posizione di failsafe fino al completamento della procedura di connessione. La procedura di connessione completa quando il LED arancione sulla S6240Rx diventa fisso. Rimuovere il connettore bind dalla S6240Rx e conservarlo in un luogo facilmente accessibile. La mancata rimozione del connettore bind fa s che la ricevente entri in modalit Bind allaccensione successiva. Scollegare la batteria dalla presa sul throttle e installare il servocomando motore. Alimentare la S6240Rx tramite la presa Bind. 5. 6. 7. 8. alimentazione S6240Rx con ricevente separata Servocomando/
ricevente Servocomando motore Batteria connessione S6240Rx con eSc 1. 2. 3. 4. Con la S6240Rx spenta, inserire il connettore bind nella presa BIND sul servo. Collegare il cavo dellESC alla presa del canale del motore e accendere lESC. Il LED arancione lampeggia continuamente, indicando che la ricevente in modalit Bind. Con il canale del motore nella posizione di failsafe preimpostata (di solito neutra), mettere la trasmittente in modalit Bind. Mantenere la posizione di failsafe fino al completamento della procedura di connessione. La procedura di connessione completa quando il LED arancione sulla S6240Rx fisso. Rimuovere il connettore bind dalla S6240Rx e conservarlo in un luogo facilmente accessibile. La mancata rimozione del connettore bind fa s che la ricevente entri in modalit Bind allaccensione successiva. SpecificHe S6240Rx Tipo Dimensioni (LxPxA) Peso Voltaggio Coppia Velocit Scanalatura Tipo ingranaggio Lunghezza antenna Canali Banda Servo digitale alta velocit con ricevente DSMR 41 x 20,9 x 31,6 mm 56 g 6 V 15 kg/cm @ 6 V 0,08 s/60 gradi @ 6 V 23 denti Metallo 9,30 cm 2 2,4 GHz A: 23 scanalature metalliche B: scocca metallica C: antenna D: presa Bind E: connettore bind F: presa per throttle F A B D C E istruzioni di installazione Installate il servo usando le appropriate viti di fissaggio che sono incluse nel veicolo. Per prevenire il danneggiamento del servo, cercate di registrare i braccetti di sterzata ed il valore di sterzata in modo appropriato. La S6240Rx pu essere utilizzata con pacchi batterie fino a 6 V. Montare lantenna in una posizione alta e distanziata dal veicolo. Pi alta e migliore sar il segnale ricevuto. aVViSo: non tagliare o modificare lantenna. alimentazione S6240Rx con eSc Batteria Al motore Servocomando/
ricevente ESC aVViSo: Bisogna rifare la connessione fra trasmettitore e ricevitore se:
si inverte la corsa dei servi con il Reverse. si cambia modello sulla memoria del trasmettitore. si usa il ricevitore con un trasmettitore DSMR e si cambia il frame rate sul trasmettitore. failsafe La posizione di failsafe del motore viene impostata durante la connessione (binding). Nel caso improbabile che si perda il collegamento radio durante luso, il ricevitore mander il servo del motore nella posizione di failsafe preprogrammata normalmente al centro o con i freni al massimo e lascer i servi degli altri canali nella loro posizione attuale. Se il ricevitore fosse acceso prima del trasmettitore, entrer nel modo failsafe portando il servo del motore nella sua posizione pre-
-programmata. Accendendo il trasmettitore si ristabilisce il controllo normale. iMpoRtante: Il failsafe si attiva solo nel caso che venga perso il segnale del suo trasmettitore. Non si attiver se la batteria del ricevitore scende sotto alla sua tensione minima o se il ricevitore non pi alimentato. prodotto in una busta assieme ad una descrizi-
one dettagliata degli errori e ad una lista di tutti i singoli componenti spediti. Inoltre abbiasmo bisogno di un indirizzo completo, di un numero di telefono per chiedere ulteriori domande e di un indirizzo e-mail. Garanzia a riparazione Le richieste in garanzia verranno elaborate solo se presente una prova dacquisto in originale proveniente da un rivenditore specializzato autorizzato, nella quale ben visibile la data di acquisto. Se la garanzia viene confermata, allora il prodotto verr riparato o sostituito. Questa decisione spetta esclusivamente a Horizon Hobby. Riparazioni a pagamento Se bisogna effettuare una riparazione a paga-
mento, effettueremo un preventivo che verr inoltrato al vostro rivenditore. La riparazione verr effettuata dopo lautorizzazione da parte del vostro rivenditore. La somma per la ripara-
zione dovr essere pagata al vostro rivenditore. Le riparazioni a pagamento avranno un costo minimo di 30 minuti di lavoro e in fattura includeranno le spese di restituzione. Qualsiasi riparazione non pagata e non richiesta entro 90 giorni verr considerata abbandonata e verr gestita di conseguenza. attenzione: Le riparazioni a pagamento sono disponibili solo sullelettronica e sui motori. Le riparazioni a livello meccanico, soprattutto per gli elicotteri e le vetture RC sono molto costose e devono essere effettuate autonomamente dallacquirente. Garanzia e assistenza - informazioni per i contatti Stato dacquisto Germania Horizon Hobby Horizon Technischer Service indirizzo Christian-Junge-Strae 1 25337 Elmshorn, Germania Telefono/Indirizzo e-mail
+49 (0) 4121 2655 100 service@horizonhobby.de informazioni sulla conformit per lUnione europea Horizon Hobby, LLC con la presente dichiara che il prodotto conforme ai requisiti essenziali e ad altre disposizioni rilevanti del RED direttiva. Una copia della dichiarazione di conformit per lUnione Europea disponibile a:
http://www.horizonhobby.com/content/support-render-compliance. istruzioni del Raee per lo smaltimento da parte di utenti dellUnione europea Questo prodotto non deve essere smaltito assieme ai rifiuti domestici. Invece responsabi-
lit dellutente lo smaltimento di tali rifiuti, che devono essere portati in un centro di raccolta desig-
nato per il riciclaggio di rifiuti elettronici. Con tale procedimento si aiuter preservare lambiente e le risorse non verranno sprecate. In questo modo si protegger il benessere dellumanit. Per maggiori informazioni sui punti di riciclaggio si prega di contattare il proprio ufficio locale o il servizio di smaltimento rifiuti. Guida alla risoluzione dei problemi 2,4GHz problema Il sistema non si collega possibile causa Il trasmettitore e il ricevitore sono troppo vicini Ci sono oggetti metallici vicini La ricevente va in modalit Failsafe a poca distanza dalla trasmittente La rice-
vente smette di rispondere durante lutilizzo Il ricevitore connesso alla me-
moria di un modello diverso Il trasmettitore stato posto in modalit Bind e non pi connes so ricevitore Verificare che lantenna del ricevi-
tore non sia danneggiata Tensione della batteria ricevente troppo bassa. Se la tensione della batteria fosse bassa, potrebbe scendere per brevi momenti sotto i 3,5 V causando uno spegnimento improvviso del ricevitore e una successiva riconnessione I cavi o i connettori tra batteria e ricevente sono danneggiati o lenti Soluzione Allontanare il trasmettitore a circa 3 metri dal ricevitore Spostarsi in unarea con meno metallo Accertarsi che sul trasmettitore sia attiva la memoria giusta Ripetere la procedura di conne-
ssione fra trasmettitore e ricevitore Accertarsi che lantenna del ricevitore sia inserita nel suo tubo e posta nella parte alta del veicolo Sostituire il ricevitore o contattare il servizio assistenza Horizon Caricare la batteria del ricevitore o del veicolo. I ricevitori Spektrum ri-
chiedono almeno 3,5 V per funzionare Controllare i cavi e le connessioni tra batteria e ricevente. Riparare o sostituire i cavi e/o i connettori periodo di garanzia Garanzia esclusiva Horizon Hobby, LLC, (Horizon) garantisce che i prodotti acquistati (il Prodotto) sono privi di difetti relativi ai materiali e di eventuali errori di montaggio. Il periodo di garanzia conforme alle disposizioni legali del paese nel quale il prodotto stato acquistato. Tale periodo di garanzia ammonta a 6 mesi e si estende ad altri 18 mesi dopo tale termine. Limiti della garanzia
(a) La garanzia limitata allacquirente originale
(Acquirente) e non cedibile a terzi. Lacqui-
rente ha il diritto a far riparare o a far sostituire la merce durante il periodo di questa garanzia. La garanzia copre solo quei prodotti acquistati presso un rivenditore autorizzato Horizon. Altre transazioni di terze parti non sono coperte da questa garanzia. La prova di acquisto necessaria per far valere il diritto di garanzia. Inoltre, Horizon si riserva il diritto di cambiare o modificare i termini di questa garanzia senza alcun preavviso e di escludere tutte le altre garanzie gi esistenti.
(b) Horizon non si assume alcuna garanzia per la disponibilit del prodotto, per ladeguatezza o lidoneit del prodotto a particolari previsti dallutente. sola responsabilit dellacquirente il fatto di verificare se il prodotto adatto agli scopi da lui previsti.
(c) Richiesta dellacquirente spetta soltanto a Horizon, a propria discrezione riparare o sosti-
tuire qualsiasi prodotto considerato difettoso e che rientra nei termini di garanzia. queste sono le uniche rivalse a cui lacquirente si pu appellare, se un prodotto difettoso. Horizon si riserva il diritto di controllare qualsi-
asi componente utilizzato che viene coinvolto nella rivalsa di garanzia. Le decisioni relative alla sostituzione o alla riparazione avvengono solo in base alla discrezione di Horizon. Questa garanzia non copre dei danni superficiali o danni per cause di forza maggiore, uso errato del prodotto, negligenza, uso ai fini commerci-
ali, o una qualsiasi modifica a qualsiasi parte del prodotto. Questa garanzia non copre danni dovuti ad una installazione errata, ad un funzionamento errato, ad una manutenzione o un tentativo di riparazione non idonei a cura di soggetti diversi da Horizon. La restituzione del prodotto a cura dellacquirente, o da un suo rappresentante, deve essere approvata per iscritto dalla Horizon. Limiti di danno Horizon non si riterr responsabile per danni speciali, diretti, indiretti o consequenziali;
perdita di profitto o di produzione; perdita commerciale connessa al prodotto, indipenden-
temente dal fatto che la richiesta si basa su un contratto o sulla garanzia. Inoltre la responsabi-
lit di Horizon non supera mai in nessun caso il prezzo di acquisto del prodotto per il quale si chiede la responsabilit. Horizon non ha alcun controllo sul montaggio, sullutilizzo o sulla manutenzione del prodotto o di combinazioni di vari prodotti. Quindi Horizon non accetta nessu-
na responsabilit per danni o lesioni derivanti da tali circostanze. Con lutilizzo e il montaggio del prodotto lutente acconsente a tutte le con-
dizioni, limitazioni e riserve di garanzia citate in questa sede. Qualora lutente non fosse pronto ad assumersi tale responsabilit associata alluso del prodotto, si suggerisce di di restituire il prodotto intatto, mai usato e immediatamente presso il venditore. indicazioni di sicurezza Questo un prodotto sofisticato di hobbisti-
ca e non un giocattolo. Esso deve essere manipolato con cautela, con giudizio e richiede delle conoscenze basilari di meccanica e delle facolt mentali di base. Se il prodotto non verr manipolato in maniera sicura e responsabile potrebbero risultare delle lesioni, dei gravi danni a persone, al prodotto o allambiente circostante. Questo prodotto non concepito per essere usato dai bambini senza una diretta supervisione di un adulto. Il manuale del prodotto contiene le istruzioni di sicurezza, di funzionamento e di manutenzione del prodotto stesso. fondamentale leggere e seguire tutte le istruzioni e le avvertenze nel manuale prima di mettere in funzione il prodotto. Solo cos si eviter un utilizzo errato e di preverranno incidenti, lesioni o danni. Domande, assistenza e riparazioni Il vostro ne-
gozio locale e/o luogo di acquisto non possono fornire garanzie di assistenza o riparazione senza previo colloquio con Horizon. Questo vale anche per le riparazioni in garanzia. Quindi in tale casi bisogna interpellare un rivenditore, che si metter in contatto subito con Horizon per prendere una decisione che vi possa aiutare nel pi breve tempo possibile. Manutenzione e riparazione Se il prodotto deve essere ispezionato o riparato, si prega di rivolgersi ad un rivenditore specializzato o direttamente ad Horizon. il prodotto deve essere imballato con cura. Bis-
ogna far notare che i box originali solitamente non sono adatti per effettuare una spedizione senza subire alcun danno. Bisogna effettuare una spedizione via corriere che fornisce una tracciabilit e unassicurazione, in quanto Horizon non si assume alcuna responsabilit in relazione alla spedizione del prodotto. Inserire il 2017 Horizon Hobby, LLC. DSM2, DSMR and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. Created 11/16 | 53016
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-09-18 | 2404 ~ 2476 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2017-09-18
|
||||
1 | Applicant's complete, legal business name |
Horizon Hobby, LLC
|
||||
1 | FCC Registration Number (FRN) |
0006301931
|
||||
1 | Physical Address |
2904 Research Rd.
|
||||
1 |
Champaign, Illinois 61821
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@micomlabs.com
|
||||
1 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BRW
|
||||
1 | Equipment Product Code |
SPMSS6240RX
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
C****** D****
|
||||
1 | Title |
President and EVP Product Management and Marketing
|
||||
1 | Telephone Number |
217-4********
|
||||
1 | Fax Number |
217-4********
|
||||
1 |
c******@horizonhobby.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
CENTRE OF TESTING SERVICE CO., LTD.
|
||||
1 | Name |
V******** Y******
|
||||
1 | Physical Address |
A101, No.65, Zhuji Highway, Tianhe District
|
||||
1 |
Guangzhou, Guangdong
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
+86-2********
|
||||
1 |
c******@cts-lab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | S6240Rx High-Speed, Digital Servo with DSMR Receiver | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Centre of Testing service Co., Ltd
|
||||
1 | Name |
V******** Y****
|
||||
1 | Telephone Number |
86-20********
|
||||
1 | Fax Number |
86-20********
|
||||
1 |
v******@cts-lab.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 20 | 2404.00000000 | 2476.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC