all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
(DX2E) User Guide-20121214 | Users Manual | 4.10 MiB | ||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Test Report | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Test Report | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Cover Letter(s) |
1 2 | (DX2E) User Guide-20121214 | Users Manual | 4.10 MiB |
EN NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, Inc. For up-to-date product literature, visit horizonhobby.com and click on the support tab for this product. Meaning of Special Language The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:
NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no possibility of injury. CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury. WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high probability of superficial injury. WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product and NOT a toy. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not attempt disassembly, use with incompatible components or augment product in any way without the approval of Horizon Hobby, Inc. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury. WARNING AGAINST COUNTERFEIT PRODUCTS: Thank you for purchasing a genuine Spektrum product. Always purchase from a Horizon Hobby, Inc. authorized dealer to ensure authentic high-quality Spektrum product. Horizon Hobby, Inc. disclaims all support and warranty with regards, but not limited to, compatibility and performance of counterfeit products or products claiming compatibility with DSM or Spektrum. Age Recommendation:
Not for Children under 14 years. This is not a toy. NOTICE: This product is only intended for use with unmanned, hobby-grade, remote-controlled vehicles and aircraft. Horizon Hobby disclaims all liability outside of the intended purpose and will not provide warranty service related thereto. FRANCE RF SETTING:
The DX2E has a France RF setting that complies with French regulations. When in France, always use the France power setting when operating the transmitter outdoors. WARRANTy REGISTRATION Visit www.spektrumrc.com/registration today to register your product. INSTALLING ThE TRANSMITTER BATTERIES BATTERy LED MONITOR P O W E R ST. TRIM ST. RATE Solid Green Flashing Green Battery is good (Above 4V) Battery voltage is critically low. Replace batteries
(below 4V) TH. TRIM SPEKTRUM DX2E USER GUIDE 1 EN RECEIvER COMPATIBILITy The DX2E is compatible with all Spektrum DSM, DSM2 and Marine surface receivers. RECEIvER CONNECTION AND INSTALLATION SR200 THR STR BIND Antenna LED Throttle Port Steering Port Bind/Battery Port Bind Plug 1. With the receiver off, insert the bind plug into the BIND port on the receiver. 2. Power the receiver through any other port. The green LED will flash continuously, indicating the receiver is in bind mode. 3. With the steering wheel and throttle trigger in the desired preset failsafe positions (see the Failsafe section on this page for more information), press and hold the bind button and turn on the transmitter. The green LED on the front of the transmitter will flash within three seconds, indicating the transmitter is in bind mode. Release the bind button when the green LED flashes. Continue to hold the failsafe positions until the binding process is complete. Bind Button Typical Electric Installation Battery BIND ST TH N R N R To Motor Electronic Speed Control Receiver 2.4Ghz DSM SR200 SPORT SURFACE RECEIVER THR STR BIND Steering Servo Typical Gas Installation Receiver 2.4Ghz DSM SR200 SPORT SURFACE RECEIVER THR STR BIND Throttle Servo Steering Servo Battery Install the Receiver in your vehicle using double-sided foam servo tape. Foam servo tape will hold the receiver in place and help isolate it from vibrations. Mount the antenna up and away from the vehicle in an antenna tube. The higher up the antenna is, the better signal it will receive. NOTICE: Do not cut the antenna. BINDING A RECEIvER Binding is the process of programming the receiver to recognize the GUID (Globally Unique Identifier) code of a single specific transmitter. When a receiver is bound to a transmitter, the receiver will only respond to that specific transmitter. The DX2E and SR200 are bound at the factory, but if you need to rebind for any reason, please follow these steps:
4. The LED on the receiver will glow solid when the transmitter and receiver are bound. 5. Remove the bind plug and store it in a convenient place. You must rebind when:
Different failsafe positions are desired e.g., when throttle or steering reversing has been changed. Changing receiver types e.g., changing from a DSM receiver to a DSM2 or Marine receiver. Binding the receiver to a different transmitter. Some Spektrum receivers, like the SR3001, use a bind button rather than a bind plug. The binding process is the same with this receiver; however, instead of inserting the plug before powering up the receiver, press and hold the bind button while powering up the receiver to enter bind mode. FAILSAFE Failsafe positions are also set during binding. In the unlikely event that the radio link is lost during use, the receiver will drive the servos to their preprogrammed failsafe positions
(normally full brakes and straight steering). If the receiver is turned on prior to turning on the transmitter, the receiver will enter failsafe mode. When the transmitter is turned on, normal control is resumed. For more information on setting the failsafe, refer to the Binding a Receiver section above. SERvO REvERSING If a right steering command does not result in the wheels turning right (and vice versa), the channel may need to be reversed. To reverse a channel, switch the position of the correlating switchN is for normal, R is for reverse. You can use a small screwdriver to move the switch if necessary. 2 SPEKTRUM DX2E USER GUIDE Reverse Switch Steering Reverse Switch Throttle Steering Rate Dial EN BIND ST N R TH P O W E R N R ST. TRIM ST. RATE STEERING TRIM The steering trim dial is used to adjust the steering trim when the wheel is centered. Rotating the dial changes the steering trim (the steering at rest position). Normally, the steering trim is adjusted until the vehicle tracks straight. TH. TRIM Steering Trim Dial P O W E R ST. TRIM TH. TRIM ThROTTLE TRIM The throttle trim dial is used to adjust the throttle trim when the throttle stick is released (neutral position). This is typically used to adjust the brakes. Rotating the dial causes the throttle trim (the throttle position at rest) to be changed. Throttle Trim Dial P O W E R ST. TRIM TH. TRIM STEERING RATE Steering rate (also known as dual rate) allows on-the-fly steering travel adjustments to be made using the steering rate dial. Steering rate limits the amount of travel of the steering servo. The steering rate cannot be greater than 100%. RF MODE The DX2E has a France RF Mode that complies with French regulations. The DX2E must be in France mode when used outdoors in France. At all other times, the transmitter should be in Standard mode. FRANCE MODE Turn the wheel full left, pull the trigger full throttle and hold down the bind button while turning on the transmitter. The Green LED will flash twice. STANDARD MODE Turn the wheel full right, pull the trigger full throttle and hold down the bind button while turning on the transmitter. The Green LED will flash once. ST. RATE GENERAL NOTES Radio controlled models are a great source of pleasure. Unfortunately, they can also pose a potential hazard if not operated and maintained properly. It is imperative to install your radio control system correctly. Additionally, your level of operating competency must be high enough to ensure you are able to control your model under all conditions. If you are a newcomer to radio controlled models, please seek help from an experienced modeler or your local hobby shop. SAFETy POINTS TO OBEy FOR MODELERS Ensure your batteries (both transmitter and receiver) ST. RATE have been properly charged for your model. Check all servos and their connections prior to each run. Do not operate your model near spectators, parking areas or any other area that could result in injury to people or damage of property. Do not operate your model during adverse weather conditions. Poor visibility can cause disorientation and loss of control of your model. Do not point the transmitter antenna directly toward the model. The radiation pattern from the tip of the antenna is inherently low. Do not take chances. If at any time during the operation of your model you observe any erratic or abnormal operation, immediately stop operation of your model until the cause of the problem has been ascertained and corrected. Safety can never be taken lightly. SPEKTRUM DX2E USER GUIDE 3 EN 2.4Ghz TROUBLEShOOTING GUIDE Problem Possible Cause Solution The system will not connect Your transmitter and receiver are too close together Move transmitter 8 to 12 feet from receiver The receiver goes into failsafe mode a short distance away from the transmitter The receiver quits responding during operation You are around metal objects Move to an area with less metal The model selected is not the model bound to Check model selected and ensure you are bound to that model Your transmitter was accidentally put into bind mode and is no longer bound to your receiver Rebind your transmitter and receiver Check the receiver antenna to be sure it is not cut or damaged Replace the receiver or contact Horizon Product Support Inadequate battery voltage Make sure your receiver antenna is in an antenna tube and is above the vehicle Charge batteries. Spektrum receivers require at least 3.5V to operate. An inadequate power supply can allow voltage to momentarily drop below 3.5V and cause the receiver to brown out and reconnect Loose or damaged wires or connectors between battery and receiver Check the wires and connection between the ba-
ttery and receiver. Repair or replace wires and/or connectors FCC INFORMATION This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This product contains a radio transmitter with wireless technology which has been tested and found to be compliant with the applicable regulations governing a radio transmitter in the 2.400GHz to 2.4835GHz frequency range. ANTENNA SEPARATION DISTANCE When operating your Spektrum transmitter, please be sure to maintain a separation distance of at least 5 cm between your body (excluding fingers, hands, wrists, ankles and feet) and the antenna to meet RF exposure safety requirements as determined by FCC regulations. The following illustrations show the approximate 5 cm RF exposure area and typical hand placement when operating your Spektrum transmitter. 1-yEAR LIMITED WARRANTy WhAT ThIS WARRANTy COvERS Horizon Hobby, Inc. (Horizon) warrants to the original purchaser that the product purchased (the Product) will be free from defects in materials and workmanship for a period of 1 year from the date of purchase by the Purchaser. WhAT IS NOT COvERED This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modification of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, or (v) Products not purchased from an authorized Horizon dealer. OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASERS INTENDED USE. PURChASERS REMEDy Horizons sole obligation and purchasers sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASERS SOLE AND EXCLUSIVE REMEDY. 4 SPEKTRUM DX2E USER GUIDE EN LIMITATION OF LIABILITy HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase. LAW These terms are governed by Illinois law (without regard to conflict of law principals). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice. WARRANTy SERvICES QUESTIONS, ASSISTANCE, AND SERvICES Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please direct your email to productsupport@horizonhobby. com, or call 877.504.0233 toll free to speak to a Product Support representative. You may also find information on our website at www.horizonhobby.com. INSPECTION OR SERvICES If this Product needs to be inspected or serviced, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may WARRANTy AND SERvICE CONTACT INFORMATION Country of Purchase United States of America Address 4105 Fieldstone Rd Champaign, Illinois, 61822 USA Horizon Hobby Horizon Service Center
(Electronics and engines) be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby.com under the Support tab. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton. NOTICE: Do not ship Li-Po batteries to horizon. If you have any issue with a Li-Po battery, please contact the appropriate horizon Product Support office. WARRANTy REQUIREMENTS For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon. NON-WARRANTy SERvICE Should your service not be covered by warranty service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashiers checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizons Terms and Conditions found on our website http://www.horizonhobby.com/Service/Request/. United Kingdom Horizon Product Support
(All other products) Horizon Hobby Limited Germany France Horizon Technischer Service Horizon Hobby SAS China Horizon Hobby China SPEKTRUM DX2E USER GUIDE 4105 Fieldstone Rd Champaign, Illinois, 61822 USA Units 1-4 Ployters Rd Staple Tye, Harlow, Essex CM18 7NS, United Kingdom Christian-Junge-Strae 1 25337 Elmshorn, Germany 14 Rue Gustave Eiffel Zone dActivit du Rveil Matin 91230 Montgeron Room 506, No. 97 Changshou Rd. Shanghai, China 200060 Phone Number/Email Address 877-504-0233 Online Repair Request:
visit www.horizonhobby.com/service 877-504-0233 productsupport@horizonhobby.com
+44 (0) 1279 641 097 sales@horizonhobby.co.uk
+49 (0) 4121 2655 100 service@horizonhobby.de
+33 (0) 1 60 47 44 70 infofrance@horizonhobby.com
+86 (021) 5180 9868 info@horizonhobby.com.cn 5 EN PARTS CONTACT INFORMATION Country of Purchase Horizon Hobby United States Sales United Kingdom Horizon Hobby Limited Germany Horizon Hobby GmbH Horizon Hobby SAS France China Address 4105 Fieldstone Rd Champaign, Illinois, 61822 USA Units 1-4 Ployters Rd Staple Tye Harlow, Essex CM18 7NS, United Kingdom Christian-Junge-Strae 1 25337 Elmshorn, Germany 14 Rue Gustave Eiffel Zone dActivit du Rveil Matin 91230 Montgeron Phone Number/Email Address 800-338-4639 sales@horizonhobby.com
+44 (0) 1279 641 097 sales@horizonhobby.co.uk
+49 4121 46199 60 service@horizonhobby.de
+33 (0) 1 60 47 44 70 infofrance@horizonhobby.com Horizon Hobby China Room 506, No. 97 Changshou Rd. Shanghai, China 200060
+86 (021) 5180 9868 info@horizonhobby.com.cn COMPLIANCE INFORMATION FOR ThE EUROPEAN UNION Instructions for disposal of WEEE by users in the European Union This product must not be disposed of with other waste. Instead, it is the users responsibility to dispose of their waste equipment by handing it over to a designated collections point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equip-
ment for recycling, please contact your local city office, your household waste disposal service or where you purchased the product. Declaration of Conformity
(in accordance with ISO/IEC 17050-1) No. HH2012010601 Product(s):
Spektrum DX2E/
Spektrum DX2E with SR200 SPMR2300, SPM2300 2 Item Number(s):
Equipment class:
The object of declaration described above is in conformity with the requirements of the specifications listed below, following the provisions of the European R&TTE directive 1999/5/EC:
EN 300-328 v1.7.1 EN 301 489-1 v1.7.1: 2006 EN 301 489-17 v1.3.2: 2008 EN 60950-1:2006+A11 Signed for and on behalf of:
Horizon Hobby, Inc. Champaign, IL USA January 6, 2011 Steven A. Hall Vice President International Operations and Risk Management Horizon Hobby, Inc. 6 SPEKTRUM DX2E USER GUIDE DE HINWEIS:
Alle Anweisungen, Garantien und dazugehrigen Dokumente knnen ohne Ankndigung von Horizon Hobby Inc. gendert werden. Eine aktuelle Version ersehen Sie bitte im Support Feld unter: http://www.horizonhobby.com Erklrung der Begriffe Die folgenden Begriffe werden in der gesamten Produktliteratur verwendet, um auf unterschiedlich hohe Gefahrenrisiken beim Betrieb dieses Produkts hinzuweisen:
HINWEIS: Wenn diese Verfahren nicht korrekt befolgt werden, knnen sich mglicherweise Sachschden UND geringe oder keine Gefahr von Verletzungen ergeben. ACHTUNG: Wenn diese Verfahren nicht korrekt befolgt werden, ergeben sich wahrscheinlich Sachschden UND die Gefahr von schweren Verletzungen. WARNUNG: Wenn diese Verfahren nicht korrekt befolgt werden, ergeben sich wahrscheinlich Sachschden, Kollateralschden und schwere Verletzungen ODER mit hoher Wahrscheinlichkeit oberflchliche Verletzungen. WARNUNG: Lesen Sie die GESAMTE Bedienungsanleitung, um sich vor dem Betrieb mit den Produktfunktionen vertraut zu machen. Wird das Produkt nicht korrekt betrieben, kann dies zu Schden am Produkt oder persnlichem Eigentum fhren oder schwere Verletzungen verursachen. Nicht geeignet fr Kinder unter 14 Jahren. Dies ist kein Spielzeug. Dies ist ein hochentwickeltes Hobby-Produkt. Es muss mit Vorsicht und gesundem Menschenverstand betrieben werden und bentigt gewisse mechanische Grundfhigkeiten. Wird dieses Produkt nicht auf eine sichere und verantwortungsvolle Weise betrieben, kann dies zu Verletzungen oder Schden am Produkt oder anderen Sachwerten fhren. Dieses Produkt eignet sich nicht fr die Verwendung durch Kinder ohne direkte berwachung eines Erwachsenen. Versuchen Sie nicht ohne Genehmigung durch Horizon Hobby, Inc., das Produkt zu zerlegen, es mit inkompatiblen Komponenten zu verwenden oder auf jegliche Weise zu erweitern. Diese Bedienungsanleitung enthlt Anweisungen fr Sicherheit, Betrieb und Wartung. Es ist unbedingt notwendig, vor Zusammenbau, Einrichtung oder Verwendung alle Anweisungen und Warnhinweise im Handbuch zu lesen und zu befolgen, damit es bestimmungsgem betrieben werden kann und Schden oder schwere Verletzungen vermieden werden. WARNUNG zU GEFLSCHTEN PRoDUKTEN: Vielen Dank, dass Sie sich dieses Spektrum Produkt gekauft haben. Bitte kaufen Sie Ihre Spektrum Produkte immer von einem autorisiertem Hndler um sicherzu stellen, dass Sie ein authentisches hochqualitatives original Spektrum Produkt gekauft haben. Horizon Hobby lehnt jede Untersttzung, Service oder Garantieleistung von geflschten Produkten oder Produkten ab die von sich in Anspruch nehmen kompatibel mit Spektrum oder DSM zu sein. Nicht geeignet fr Kinder unter 14 Jahren. Dies ist kein Spielzeug. HINWEIS: Dieses Produkt ist ausschlielich fr die Verwendung in unbemannten ferngesteuerten Fahrzeugen und Fluggerten im Hobbybereich vorgesehen. Horizon Hobby lehnt jede Haftung und Garantieleistung ausserhalb der vorgesehen Verwendung ab. RF EINSTELLUNG FRANKREICH Die DX2E hat eine franzsische RF Einstellung die mit den Bestimmungen in Frankreich kompatibel ist. Bitte benutzen Sie wenn Sie in Frankreich den Sender im Freien betreiben immer diese Einstellung. GARANTIEREGISTRIERUNG Registrieren Sie bitte heute Ihr Produkt unter www.spektrumrc.com/registration. EINSETzEN DER SENDERBATTERIEN BATTERy LED MoNIToR P O W E R ST. TRIM ST. RATE Grn Grn blinkt TH. TRIM Batterie ist OK (ber 4V) Batteriespannung ist kritisch niedrig. Ersetzen Sie die Batterien. (unter 4 Volt) SPEKTRUM DX2E Bedienungsanleitung 7 DE EMPFNGER KoMPATIBILITT Die DX2E ist kompatibel mit allen Spektrum DSM, DSM2 und Marine Empfngern. EMPFNGEREINBAU UND ANSCHLSSE SR200 THR STR BIND Antenne LED Anschlu Gas Anschlu Lenkung Bindestecker/
Akkuanschlu Bindestecker 1. Stecken Sie mit ausgeschalteten Empfnger den Bindestecker in den Bindeanschlu des Empfngers. 2. Schalten Sie den Empfnger durch einen beliebigen anderen Anschlu ein. Die grne LED blinkt und zeigt damit den Binde Mode an. 3. Mit dem Gashebel und Lenkrad in den gewnschten Preset Failsafepositionen (siehe dazu den Abschnitt Failsafe auf dieser Seite) drcken und halten Sie den Bindeknopf gedrckt und schalten den Sender ein. Die grne LED auf der Vorderseite des Senders blinkt innerhalb von drei Sekunden und zeigt damit an, dass sich der Sender im Bindemode befindet. Lassen Sie den Knopf los wenn die grne LED blinkt. Halten Sie die Failsafepositionen bis der Bindevorgang durchgefhrt ist. Bindeknopf BIND ST TH N R N R Zum Motor 4. Die LED auf dem Empfnger leuchtet und zeigt damit an, dass Sender und Empfnger gebunden sind. TyPISCHER ELEKTRoEINBAU Akku Empfnger 2.4Ghz DSM SR200 SPORT SURFACE RECEIVER THR STR BIND Elektronischer Fahrtenregler Lenkservo TyPISCHER VERBRENNEREINBAU Empfnger 2.4Ghz DSM SR200 SPORT SURFACE RECEIVER THR STR BIND Gasservo Lenkservo Akku Befestigen Sie den Empfnger mit doppelseitigen Schaumklebeband. Das Klebeband hlt den Empfnger in Position und schtzt ihn vor Vibrationen. Schieben Sie die Antenne in ein Antennenrhrchen und stellen dieses aufrecht. Je hher die Antenne steht, desto besser wird sie das Signal empfangen. HINWEIS: Schneiden oder krzen Sie die Antenne nicht. BINDEN DES EMPFNGERS Binden ist der Prozess der Programmierung des Empfnger mit dem eindeutigen Signal eines spezifischen Senders
(GUID). Ist der Empfnger an den Sender gebunden, wird nur er auf die Signale des Senders reagieren. Die DX2E und der SR200 sind ab Werk gebunden. Sollten Sie diese neu binden wollen folgen Sie bitte dieses Schritten:
8 5. Nehmen Sie den Bindestecker aus dem Bindeport herraus und heben ihn sorgfltig auf. Sie mssen den Bindevorgang wiederholen wenn:
Sie andere Failsafepositionen wnschen, oder wenn die Gas- oder Lenkfunktion reversiert wurden. Sie einen anderen Empfnger verwenden oder von einem DSM zu einem DSM2 oder Marine Empfnger wechseln. Sie den Empfnger an einen anderen Sender binden. Einige Spektrum Empfnger wie zum Beispiel der SR3001 haben einen Bindeknopf und keinen Bindeanschlu.
(Port) Der Bindevorgang ist der gleiche. Statt vorher den Bindestecker einzustecken, drcken und halten Sie den Bindeknopf gedrckt whrend Sie den Empfnger einschalten um in den Bindemode zu gelangen. FAILSAFE Die Failsafepositionen werden whrend des Bindes eingestellt. In dem unvorhergesehenden Fall, dass die RF Verbindung unterbrochen wird, fhrt der Empfnger die Servos in die vorprogrammierten Failsafepositionen. Sollte der Empfnger vor dem Sender eingeschaltet werden geht der Empfnger in den Failsafemode. Wird dann der Sender eingeschaltet haben, Sie wieder normale Kontrolle ber das Modell. Fr mehr Informationen ber das Einstellen der Faisafepositionen sehen Sie bitte im Abschnitt-Binden des Empfnger nach. SERVoREVERSE Sollte die Lenkbewegung nach Rechts nicht zur Folge haben, dass sich die Reifen auch nach rechts bewegen, mssen Sie den Kanal reversieren (umdrehen). Um den Kanal zu reversieren schalten Sie den dazugehrigen Schalter auf die andere Position - N steht fr Normal, R fr Reversiert. Sie knnen einen kleinen Schraubendreher nutzen um die Schalter zu bewegen. SPEKTRUM DX2E Bedienungsanleitung Reverseschalter Lenkung Reverseschalter Gas BIND ST TH N R N R LENKUNGSTRIMMUNG Mit dem Drehrad der Lenkungstrimmung knnen Sie die Trimmwerte nach Links und Rechts verndern. Mit diesem Drehrad knnen Sie den Geradeauslauf des Fahrzeuges einstellen. Drehrad Lenkungstrimmung P O W E R ST. TRIM TH. TRIM TRIMM DES GASKANALS Mit dieser Trimfunktion knnen Sie eine Feinjustage des Gas und Bremsservos vornehmen. Zum Beispiel ist es mglich das Standgas bei einem Auto mit Verbrennungsmotor fr die Kaltlaufphase zu erhhen um ein Absterben des Motors zu verhindern. Drehregler Gastrimmung P O W E R ST. TRIM TH. TRIM STEUERWEGE Steuerweg (auch bekannt als Dual Rate) erlaubt die Einstellung des Steuerwegs whrend der Fahrt. Die Steering Rate limitiert den Lenkausschlag des Lenkservos. Sie kann nicht grer als 100%. Steering Rate Dial ST. TRIM ST. RATE DE RF EINSTELLUNG Die DX2E hat eine franzsische RF Einstellung die mit den Bestimmungen in Frankreich kompatibel ist. Bitte benutzen Sie wenn Sie in Frankreich im Freien fahren immer diese Einstellung. Wenn Sie nicht in Frankreich sind sollte der Sender im Standartmode sein. AKTIVIEREN DER FRANzSISCHEN RF EINSTELLUNGEN Drehen Sie das Lenkrad voll nach links, ziehen Sie den Gashebel auf Vollgas und halten Sie den Bindeknopf whrend des Einschaltens gedrckt. Die Grne LED blinkt zwei Mal. DEAKTIVIEREN DER FRANzSISCHEN RF EINSTELLUNGEN Drehen Sie das Lenkrad voll nach rechts, ziehen Sie den Gashebel auf Vollgas und halten Sie den Bindeknopf whrend des Einschaltens gedrckt. Die Grne LED blinkt ein Mal. ALLGEMEINE HINWEISE Ferngesteuerte Modelle bereiten viel Spa. Leider knnen Sie auch ein potenzielles Gefahrenrisiko darstellen, wenn sie nicht ordnungsgem betrieben und gewartet werden. Es ist unbedingt ntig, die Funkfernsteuerung ordnungsgem zu installieren. Darber hinaus mssen Sie gengend Erfahrung besitzen, damit Sie das Modell unter allen Bedingungen beherrschen. Wenn Sie noch keine Erfahrung mit ferngesteuerten Modellen haben, lassen sich Sie bitte von einem erfahrenen Modellbesitzer oder Ihrem rtlichen Hobbyshop einweisen. SICHERHEITSRICHTLINIEN FR MoDELLPI-
LoTEN Stellen Sie vor jeder Benutzung des Senders sicher, dass die Akkus von Sender und Empfnger vollstndig geladen sind. ST. RATE ST. RATE Vergewissern Sie sich vor dem Betrieb eines Modells, dass alle Servos, Gestnge und elektrischen Kabel ordnungsgem verbunden sind. Betreiben Sie das Modell nicht in der Nhe von Zuschauern, Parkpltzen oder anderen Stellen, wo Personen verletzt oder Sachwerte beschdigt werden knnten. Betreiben Sie das Modell nicht bei schlechten Witterungsbedingungen. Schlechte Sicht kann die Orientierung beeintrchtigen und zum Verlust der Kontrolle ber das Modell fhren. Zeigen Sie mit der Antenne nicht direkt auf das Modell. Die Funkabstrahlung der Antenne ist von der Spitze her geringer. Verlassen Sie sich nicht auf Zuflle oder Glck. Beenden Sie immer den Betrieb des Modells, wenn dieses nicht richtig auf den Sender reagiert. Fahren Sie nicht so lange wie die Ursache nicht gefunden und beseitigt ist. Sicherheit darf niemals auf die leichte Schulter genommen werden. TH. TRIM SPEKTRUM DX2E Bedienungsanleitung 9 DE 2.4GHz FEHLERSUCHANLEITUNG Problem Das System will sich nicht verbinden Mgliche Ursache Sender und Empfnger stehen zu nah zusammen Lsung Stellen Sie den Sender und Empfnger 2,643,96 m auseinander Sie sind von metallischen Objekten umgeben Gehen Sie in eine Umgebung mit weniger Metall Das gewhlte Modell ist nicht das gebundene Modell Prfen Sie das gewhlte Modell und stellen sicher dass es gebunden ist Ihr Sender wurde versehentlich in den Bin-
demode gebracht und ist nicht lnger an den Empfnger gebunden Binden Sie Sender und Empfnger erneut berprfen Sie die Empfngerantenne auf Beschdigungen oder Krzungen Ersetzen Sie den Empfnger oder kontakten den technische Service von Horizon Hobby Der Empfnger geht nach kurzer Distanz in den Failsafemode Der Empfnger reagiert nicht mehr Nicht ausreichende Akkuspannung Lose oder beschdigte Kabel/Verbinder zwis-
chen Akku und Empfnger Stellen Sie sicher, dass sich die Antenne im Antennerhrchen befindet und berhalb des Fahrzeuges ist Laden Sie die Akkus. Spektrum Empfnger be-
ntigen mindestesn 3,5 Volt Betriebsspannung. Eine nicht ausreichende Stromversogung kann die Akkuspannung unter 3,5 Volt fallen lassen berprfen Sie die Kabel und Verbinder zwischen Akku und Empfnger. Reparieren oder ersetzen Sie Kabel oder Verbinder GARANTIE UND SERVICE INFoRMATIoNEN WARNUNG Ein ferngesteuertes Modell ist kein Spielzeug. Es kann, wenn es falsch eingesetzt wird, zu erheblichen Verletzungen bei Lebewesen und Beschdigungen an Sachgtern fhren. Betreiben Sie Ihr RC-Modell nur auf freien Pltzen und beachten Sie alle Hinweise der Bedienungsanleitung des Modells wie auch der Fernsteuerung. GARANTIEzEITRAUM Exklusive Garantie - Horizon Hobby Inc (Horizon) garantiert, dass das gekaufte Produkt (Produkt) frei von Material-
und Montagefehlern ist. Der Garantiezeitraum entspricht den gesetzlichen Bestimmung des Landes, in dem das Produkt erworben wurde. In Deutschland betrgt der Garantiezeitraum 6 Monate und der Gewhrleistungszeitraum 18 Monate nach dem Garantiezeitraum. EINSCHRNKUNGEN DER GARANTIE
(a) Die Garantie wird nur dem Erstkufer (Kufer) gewhrt und kann nicht bertragen werden. Der Anspruch des Kufers besteht in der Reparatur oder dem Tausch im Rahmen dieser Garantie. Die Garantie erstreckt sich ausschlielich auf Produkte, die bei einem autorisierten Horizon Hndler erworben wurden. Verkufe an dritte werden von dieser Garantie nicht gedeckt. Garantieansprche werden nur angenommen, wenn ein gltiger Kaufnachweis erbracht wird. Horizon behlt sich das Recht vor, diese Garantiebestimmungen ohne Ankndigung zu ndern oder modifizieren und widerruft dann bestehende Garantiebestimmungen.
(b) Horizon bernimmt keine Garantie fr die Verkaufbarkeit des Produktes, die Fhigkeiten und die Fitness des Verbrauchers fr einen bestimmten Einsatzzweck des Produktes. Der Kufer allein ist dafr verantwortlich, zu prfen, ob das Produkt seinen Fhigkeiten und dem vorgesehenen Einsatzzweck entspricht.
(c) Ansprche des Kufers Es liegt ausschlielich im Ermessen von Horizon, ob das Produkt, bei dem ein Garantiefall festgestellt wurde, repariert oder ausgetauscht wird. Dies sind die exklusiven Ansprche des Kufers, wenn ein Defekt festgestellt wird. Horizon behlt sich vor, alle eingesetzten Komponenten zu prfen, die in den Garantiefall einbezogen werden knnen. Die Entscheidung zur Reparatur oder zum Austausch liegt nur bei Horizon. Die Garantie schliet kosmetische Defekte oder Defekte, hervorgerufen durch hhere Gewalt, falsche Behandlung des Produktes, falscher Einsatz des Produktes, kommerziellen Einsatz oder Modifikationen irgendwelcher Art aus. Die Garantie deckt Schden, die durch falschen Einbau, falsche Handhabung, Unflle, Betrieb, Service oder Reparaturversuche, die nicht von Horizon ausgefhrt wurden, aus. Rcksendungen durch den Kufer direkt an Horizon oder eine seiner Landesvertretung bedrfen der schriftlichen. SCHADENSBESCHRNKUNG Horizon ist nicht fr direkte oder indirekte Folgeschden, Einkommensausflle oder kommerzielle Verluste, die in irgendeinem Zusammenhang mit dem Produkt stehen nicht verantwortlich, unabhngig ab ein Anspruch im Zusammenhang miteinem Vertrag, der Garantie oder der Gewhrleistung erhoben werden. Horizon wird darber 10 SPEKTRUM DX2E Bedienungsanleitung DE hinaus keine Ansprche aus einem Garantiefall akzeptieren, die ber den individuellen Wert des Produktes hinaus gehen. Horizon hat keine Einfluss auf den Einbau, die Verwendung oder die Wartung des Produktes oder etwaiger Produktkombinationen, die vom Kufer gewhlt werden. Horizon bernimmt keine Garantie und akzeptiert keine Ansprche fr in der folge auftretende Verletzungen oder Beschdigungen. Mit der Verwendung und dem Einbau des Produktes akzeptiert der Kufer alle aufgefhrten Garantiebestimmungen ohne Einschrnkungen und Vorbehalte. Wenn Sie als Kufer nicht bereit sind, diese Bestimmungen im Zusammenhang mit der Benutzung des Produktes zu akzeptieren, werden Sie gebeten, dass Produkt in unbenutztem Zustand in der Originalverpackung vollstndig bei dem Verkufer zurckzugeben. SICHERHEITSHINWEISE Dieses ist ein hochwertiges Hobby Produkt und kein Spielzeug. Es muss mit Vorsicht und Umsicht eingesetzt werden und erfordert einige mechanische wie auch mentale Fhigkeiten. Ein Versagen, das Produkt sicher und umsichtig zu betreiben kann zu Verletzungen von Lebewesen und Sachbeschdigungen erheblichen Ausmaes fhren. Dieses Produkt ist nicht fr den Gebrauch durch Kinder ohne die Aufsicht eines Erziehungsberechtigten vorgesehen. Die Anleitung enthlt Sicherheitshinweise und Vorschriften sowie Hinweise fr die Wartung und den Betrieb des Produktes. Es ist unabdingbar, diese Hinweise vor der ersten Inbetriebnahme zu lesen und zu verstehen. Nur so kann der falsche Umgang verhindert und Unflle mit Verletzungen und Beschdigungen vermieden werden. FRAGEN, HILFE UND REPARATUREN Ihr lokaler Fachhndler und die Verkaufstelle knnen eine Garantiebeurteilung ohne Rcksprache mit Horizon nicht durchfhren. Dies gilt auch fr Garantiereparaturen. Deshalb kontaktieren Sie in einem solchen Fall den Hndler, der sich mit Horizon kurz schlieen wird, um eine sachgerechte Entscheidung zu fllen, die Ihnen schnellst mglich hilft. WARTUNG UND REPARATUR Muss Ihr Produkt gewartet oder repariert werden, wenden Sie sich entweder an Ihren Fachhndler oder direkt an Horizon. Packen Sie das Produkt sorgfltig ein. Beachten Sie, dass der Originalkarton in der Regel nicht ausreicht, um beim Versand nicht beschdigt zu werden. Verwenden Sie einen Paketdienstleister mit einer Tracking Funktion und Versicherung, da Horizon bis zur Annahme keine Verantwortung fr den Versand des Produktes bernimmt. Bitte legen Sie dem Produkt einen Kaufbeleg bei, sowie eine ausfhrliche Fehlerbeschreibung und eine Liste aller eingesendeten Einzelkomponenten. Weiterhin bentigen wir die vollstndige Adresse, eine Telefonnummer fr Rckfragen, sowie eine Email Adresse. GARANTIE UND REPARATUREN Garantieanfragen werden nur bearbeitet, wenn ein Originalkaufbeleg von einem autorisierten Fachhndler beiliegt, aus dem der Kufer und das Kaufdatum hervorgeht. Sollte sich ein Garantiefall besttigen wird das Produkt repariert oder ersetzt. Diese Entscheidung obliegt einzig Horizon Hobby. KoSTENPFLICHTIGE REPARATUREN Liegt eine kostenpflichtige Reparatur vor, erstellen wir einen Kostenvoranschlag, den wir Ihrem Hndler bermitteln. Die Reparatur wird erst vorgenommen, wenn wir die Freigabe des Hndlers erhalten. Der Preis fr die Reparatur ist bei Ihrem Hndler zu entrichten. Bei kostenpflichtigen Reparaturen werden mindestens 30 Minuten Werkstattzeit und die Rckversandkosten in Rechnung gestellt. Sollten wir nach 90 Tagen keine Einverstndniserklrung zur Reparatur vorliegen haben, behalten wir uns vor, das Produkt zu vernichten oder anderweitig zu verwerten. ACHTUNG: Kostenpflichtige Reparaturen nehmen wir nur fr Elektronik und Motoren vor. Mechanische Reparaturen, besonders bei Hubschraubern und RC-Cars sind extrem aufwendig und mssen deshalb vom Kufer selbst vorgenommen werden. SICHERHEIT UND WARNUNGEN Als Anwender des Produktes sind Sie verantwortlich fr den sicheren Betrieb aus dem eine Gefhrdung fr Leib und Leben sowie Sachgter nicht hervorgehen soll. Befolgen Sie sorgfltig alle Hinweise und Warnungen fr dieses Produkt und fr alle Komponenten und Produkte, die Sie im Zusammenhang mit diesem Produkt einsetzen. Ihr Modell empfngt Funksignale und wird dadurch gesteuert. Funksignale knnen gestrt werden, was zu einem Signalverlust im Modell fhren wrde. Stellen Sie deshalb sicher, dass Sie um Ihr Modell einen ausreichenden Sicherheitsabstand einhalten, um einem solchen Vorfall vorzubeugen. GARANTIE UND SERVICE KoNTAKTINFoRMATIoNEN Land des Kauf Horizon Hobby Adresse Christian-Junge-Strae 1 25337 Elmshorn, Deutschland Telefon/E-mail Adresse
+49 (0) 4121 2655 100 service@horizonhobby.de Deutschland Horizon Technischer Service KUNDENDIENSTINFoRMATIoNEN Land des Kauf Horizon Hobby Deutschland Horizon Hobby GmbH Adresse Christian-Junge-Strae 1 25337 Elmshorn, Deutschland Telefon/E-mail Adresse
+49 4121 46199 60 service@horizonhobby.de SPEKTRUM DX2E Bedienungsanleitung 11 DE ENTSoRGUNGSRICHTLINIEN IN DER EURoPISCHEN UNIoN Konformittserklrung laut Allgemeine Anforderungen (ISo/IEC 17050-1:2004, korrigierte Fassung 2007-06-15);
Deutsche und Englische Fassung EN ISo/IEC 17050-1:2010 Declaration of conformity (in accordance with ISO/IEC 17050-1) Horizon Hobby, Deutschland GmbH Christian-Junge Strae 1 D-25337 Elmshorn erklrt das Produkt:
Declares the product:
Gerteklasse:
Equipment class:
Spektrum DX2E/Spektrum DX2E mit SR200 (SPMR2300, SPM2300) Spektrum DX2E/Spektrum DX2E with SR200 (SPMR2300, SPM2300) 2 2 Den grundlegenden Anforderungen des 3 und den brigen einschlgigen Bestimmungen des FTEG (Artikel 3 der R&TTE) entspricht. complies with the essential requirements of 3 and other relevant provisions of the FTEG (Article 3 of the R&TTE directive). Angewendete harmonisierte Normen:
Harmonised standards applied:
EN 300-328 V1.7.1 EN 301 489-1 V1.7.1: 2006 EN 301 489-17 V1.3.2: 2008 EN 60950-1:2006+A11 Steven A. Hall Geschftsfhrer Managing Director Birgit Schamuhn Geschftsfhrerin Managing Director Elmshorn, 01.06.2012 Horizon Hobby GmbH; Christian-Junge-Strae 1, 25337 Elmshorn HR Pi: HRB 1909; UStIDNr.:DE812678792; Str.Nr.: 1829812324 Geschftsfhrer: Birgit Schamuhn, Steven A. Hall Tel.: +49 4121 4619960 Fax: +49 4121 4619970 eMail: info@horizonhobby.de; Internet: www.horizonhobby.de Es gelten unsere allgemeinen Geschftsbedingungen, die in unseren Geschftsrumen eingesehen werden knnen. Ware bleibt bis zur vollstndigen Bezahlung Eigentum der Horizon Hobby GmbH Entsorgung in der Europischen Union Dieses Produkt darf nicht ber den Hausmll entsorgt werden. Es ist die Verantwortung des Benutzers, dass Produkt an einer registrierten Sammelstelle fr Elektroschrott abzugeben diese Verfahren stellt sicher, dass die Umwelt geschont wird und natrliche Ressourcen nicht ber die Gebhr beansprucht werden. Dadurch wird das Wohlergehen der menschlichen Gemeinschaft geschtzt. Fr weitere Informationen, wo der Elektromll entsorgt werden kann, knnen Sie Ihr Stadtbro oder Ihren lokalen Entsorger kontaktieren. 12 SPEKTRUM DX2E Bedienungsanleitung FR REMARQUE:
La totalit des instructions, garanties et autres documents est sujette modification la seule discrtion dHorizon Hobby, Inc. Pour obtenir la documentation jour, rendez-vous sur le site www.horizonhobby.com et cliquez sur longlet de support de ce produit. Signification de certains termes spcifiques Les termes suivants sont utiliss dans lensemble du manuel pour indiquer diffrents niveaux de danger lors de lutilisation de ce produit:
REMARQUE: procdures qui, si elles ne sont pas suivies correctement, peuvent entraner des dgts matriels ET potentiellement un risque faible de blessures. ATTENTION: procdures qui, si elles ne sont pas suivies correctement, peuvent entraner des dgts matriels ET des blessures graves. AVERTISSEMENT: procdures qui, si elles ne sont pas suivies correctement, peuvent entraner des dgts matriels et des blessures graves OU engendrer une probabilit leve de blessure superficielle. AVERTISSEMENT: Lisez la TOTALIT du manuel dutilisation afin de vous familiariser avec les caractristiques du produit avant de le faire fonctionner. Une utilisation incorrecte du produit peut entraner lendommagement du produit lui-
mme, ainsi que des risques de dgts matriels, voire de blessures graves. Ceci est un produit de loisirs sophistiqu. Il doit tre manipul avec prudence et bon sens et requiert des aptitudes de base en mcanique. Toute utilisation de ce produit ne respectant pas les principes de scurit et de responsabilit peut entraner des dgts matriels, endommager le produit et provoquer des blessures. Ce produit nest pas destin tre utilis par des enfants sans la surveillance directe dun adulte. Nessayez pas de dmonter le produit, de lutiliser avec des composants incompatibles ou den amliorer les performances sans laccord dHorizon Hobby, Inc. Ce manuel comporte des instructions relatives la scurit, au fonctionnement et lentretien. Il est capital de lire et de respecter toutes les instructions et tous les avertissements du manuel avant lassemblage, le rglage ou lutilisation afin de manipuler correctement lappareil et dviter tout dgt matriel ainsi que toute blessure grave. ATTENTION AUX cONTREFAONS: Nous vous remercions davoir achet un vritable produit Spektrum. Toujours acheter chez un revendeur officiel Horizon hobby pour tre sur davoir des produits authentiques. Horizon Hobby dcline toute garantie et responsabilit concernant les produits de contrefaon ou les produits se disant compatibles DSM ou Spektrum. 14 ans et plus. ceci nest pas un jouet. REMARQUE: Ce produit est uniquement rserv une utilisation avec des modles rduits radiocommands de loisir. Horizon Hobby se dgage de toute responsabilit et garantie si le produit est utilis dautre manire que celle cite prcdemment. MOdE RF FRANcE La DX2E possde un mode France. Quand vous utilisez lmetteur en France, vous devez imprativement vous mettre en mode RF France. Consultez la page 3 pour plus dinformations. ENREGISTREMENT dE GARANTIE Visitez le site www.spektrumrc.com/registration pour enregistrer votre produit. MISE EN plAcE dES pIlES dEl dINdIcATION dE TENSION P O W E R ST. TRIM ST. RATE Vert fixe Vert clignotant Tension correcte (suprieure 4V) Tension faible, remplacez les piles TH. TRIM MANUEL DUTILISATION SPEKTRUM DX2E 13 FR cOMpATIbIlIT dES RcEpTEUR Die DX2E ist kompatibel mit allen Spektrum DSM, DSM2 und Marine Empfngern. bRANchEMENTS ET INSTAllATION dU RcEpTEUR SR200 THR STR BIND Antenne DEL Port des gaz Port de direction Port Bind (affectation) et batterie Prise Bind ensemble lusine, cependant si vous devez effectuez une affectation, suivez les tapes suivantes:
1. Rcepteur hors tension, insrez la prise de bind dans le port bind du rcepteur. 2. Alimentez le rcepteur par nimporte quel autre port. Le DEL verte va se mettre clignoter, indiquant que le rcepteur est en mode affectation. 3. Avec le volant et la gchette en position dsire pour le failsafe (consultez la section failsafe pour plus dinformations), pressez et maintenez le bouton Bind tout en mettant lmetteur sous tension. La DEL verte sur la faade de lmetteur va clignoter durant 3 secondes indiquant que lmetteur est en mode affectation. Relchez le bouton ds que la DEL se met flasher. Continuez de maintenir les commandes en position de failsafe jusqua la fin du processus. Bouton Bind (affectation) INSTAllATION TypIQUE pOUR MOdlE lEcTRIQUE Batterie Vers le moteur BIND ST TH N R N R contrleur lectronique de vitesse Rcepteur 2.4Ghz DSM SR200 SPORT SURFACE RECEIVER THR STR BIND Servo de direction INSTAllATION TypIQUE pOUR MOdlE ThERMIQUE Rcepteur 2.4Ghz DSM SR200 SPORT SURFACE RECEIVER THR STR BIND Servo de gaz Servo de direction Batterie Le rcepteur doit tre fix votre vhicule en utilisant de la mousse double face. Cette mousse double face maintient le rcepteur en place tout en lisolant des vibrations. Lantenne doit tre guide verticalement laide dun tube dantenne. Plus lantenne sera leve, meilleure sera la rception. REMARQUE: Ne jamais couper lantenne. AFFEcTATION dU RcEpTEUR Laffectation est le processus qui programme le rcepteur pour quil reconnaisse le code (appel GUIDGlobally Unique Identifier) dun metteur spcifique. Quand un rcepteur est affect un metteur, le rcepteur ne rpondra quaux ordres donns par cet metteur ou mmoire modle. La DX2E et le SR200 sont affects 4. La DEL du rcepteur sclaire de faon fixe quand laffectation est effectue. 5. Retirez la prise de bind et rangez la soigneusement. Vous devez refaire laffectation quand:
Diffrentes positions de failsafe sont dsires ou que les sens de rottion des servos ont t changs. Vous changez de rcepteur Vous affectez le rcepteur un autre rcepteur. REMARQUE: Certains rcepteurs Spektrum, tels que le SR3001 par exemple, utilisent un bouton daffectation plutt quune prise daffectation. La procdure daffectation est identique avec ce rcepteur. Cependant, au lieu de brancher la prise avant dallumer le rcepteur, appuyez sur le bouton daffectation (Bind) et maintenez-le enfonc lors de lallumage du rcepteur pour faire entrer ce dernier en mode daffectation. FAIlSAFE Les positions du failsafe sont enregistres durant laffectation. Si une perte de signal interviens durant lutilisation du modle, les servos seront automatiquement placs en position failsafe (gnralement gaz au ralenti et direction au neutre). Quand le signal est rtabli, le failsafe se dsactive, le contrle se ractive. Pour plus dinformations concernant le paramtrage du failsafe, consultez la section daffectation du rcepteur. INVERSION dU SENS dES SERVOS Si quand vous tournez le volant vers la droite , les roues braquent vers la gauche (et vice et versa), la voie doit tre inverse. Pour inverser une voie, dplacez linterrupteur de la voie correspondante de la position N la position R. Si ncessaire vous pouvez utiliser un petit tournevis pour dplacer linterrupteur. 14 MANUEL DUTILISATION SPEKTRUM DX2E Inversion du sens de direction Inversion du sens des gaz BIND ST TH N R N R TRIM dE dIREcTION Le trim de direction vous permet de corriger la trajectoire du vhicule. Par exemple, si votre vhicule a tendance aller vers la droite, ajustez le trim vers la gauche jusqu obtenir une trajectoire parfaitement rectiligne. Trim de direction P O W E R ST. TRIM TH. TRIM TRIM dES GAz Le bouton rotatif du trim des gaz sert ajuster le trim des gaz lorsque la manette des gaz est relche (position neutre). On sen sert typiquement pour rgler les freins. Une rotation du bouton entrane un changement du trim des gaz
(la position de la manette des gaz au repos). Trim de gaz P O W E R ST. TRIM TH. TRIM dbATTEMENT dE dIREcTION Le dbattement de direction peut tre ajust tout moment durant le pilotage. Cette fonction vous permet de rduire le dbattement de la direction, le dbattement ne peut tre suprieur 100%. Rglage du dbattement de direction FR MOdE RF La DX2E possde un mode RF France pour sadapter la rglementation franaise. La DX2E doit tre imprativement en mode France quand elle est utilise en France. MOdE FRANcE Tournez le volant totalement gauche, pressez la gchette plein gaz et maintenez le bouton bind appuy durant la mise sous tension de lmetteur. La DEL verte va flasher 2 fois. MOdE STANdARd Tournez le volant totalement droite, pressez la gchette plein gaz et maintenez le bouton bind appuy durant la mise sous tension de lmetteur. La DEL verte va flasher 1 fois. GNRAlITS En tant quutilisateur de ce produit, il est de votre seule responsabilit de le faire fonctionner dune manire qui ne mette en danger ni votre personne, ni des tiers et qui ne provoque pas de dgts au produit ou la proprit de tiers. Respectez scrupuleusement les instructions et avertissements pour ce produit ainsi que pour tous les quipements optionnels/complmentaires (chargeurs, packs de batteries rechargeables, etc.) que vous utilisez. ASpEcTS dE ScURIT RESpEcTER pAR lES MOdlISTES Assurez-vous que les batteries (tant celle de lmetteur que celle du rcepteur) ont t charges correctement pour votre modle. ST. RATE Notez le temps de fonctionnement du systme de faon savoir combien de temps vous pouvez utiliser lmetteur en toute scurit. Avant toute utilisation, contrlez tous les servos et leurs connexions. Nutilisez pas votre modle proximit de spectateurs, sur un parking ou en tout autre lieu o sa manipulation pourrait entraner des blessures corporelles ou provoquer des dgts matriels. ST. RATE Nutilisez pas votre modle en cas de conditions mtorologiques dfavorables. Une visibilit mdiocre peut tre source de dsorientation et pourrait vous amener perdre le contrle de votre modle. Ne pointez pas lantenne de lmetteur directement vers le modle. Le diagramme de rayonnement du sommet de lantenne est, intrinsquement, faible. Ne prenez pas de risques. Si, en cours dutilisation de votre modle, vous constatez, quelque moment que ce soit, un comportement erratique ou anormal, cessez immdiatement de lutiliser jusqu trouver la cause du problme et y remdier. La scurit est une affaire ne jamais prendre la lgre. ST. TRIM ST. RATE TH. TRIM MANUEL DUTILISATION SPEKTRUM DX2E 15 FR GUIdE dE dpANNAGE 2.4Ghz Problme Le systme ne se connecte pas Cause possible Solution Lmetteur et le rcepteur sont trop proches lun de lautre Eloignez lmetteur une distance de 2m environ Vous tes trop poche dobjets mtalliques Eloignez vous de cette zone Le modle slectionn nest pas affect avec lmetteur Vrifiez que vous avez slectionn le bon modle et quil est affect Emetteur mis accidentellement en mode affectation R-effectuez le procesus daffectation Le rcepteur passe en mode failsafe une faible distance de lmetteur Contrlez ltat de lantenne du rcepteur Le rcepteur ne rponds pas durant lutilisation Tension de la batterie trop faible Remplacez le rcepteur ou contactez le service technique Horizon Hobby Assurez-vous que lantenne du rcepteur se trouve dans un tube dantenne et au-dessus du vhicule Rechargez totalement les batteries. Les rcepteurs Spektrum ncessitent un minimum de 3.5V pour fonc-
tionner. Une alimentation insuffisante, peut momentan-
ment chuter en dessous de 3.5V, causant une coupure dalimentation Cbles abms ou dbranchs entre la batterie et le rcepteur Contrlez ltat des cbles et remplacez les sils sont endommags GARANTIE ET RpARATIONS dURE dE lA GARANTIE Garantie exclusive - Horizon Hobby, Inc. (Horizon) garantit que le Produit achet (le Produit ) sera exempt de dfauts matriels et de fabrication sa date dachat par lAcheteur. La dure de garantie correspond aux dispositions lgales du pays dans lequel le produit a t acquis. La dure de garantie est de 6 mois et la dure dobligation de garantie de 18 mois lexpiration de la priode de garantie. lIMITATIONS dE lA GARANTIE
(a) La garantie est donne lacheteur initial ( Acheteur et nest pas transfrable. Le recours de lacheteur consiste en la rparation ou en lchange dans le cadre de cette garantie. La garantie sapplique uniquement aux produits achets chez un revendeur Horizon agr. Les ventes faites des tiers ne sont pas couvertes par cette garantie. Les revendications en garantie seront acceptes sur fourniture dune preuve dachat valide uniquement. Horizon se rserve le droit de modifier les dispositions de la prsente garantie sans avis pralable et rvoque alors les dispositions de garantie existantes.
(b) Horizon nendosse aucune garantie quant la vendabilit du produit ou aux capacits et la forme physique de lutilisateur pour une utilisation donne du produit. Il est de la seule responsabilit de lacheteur de vrifier si le produit correspond ses capacits et lutilisation prvue.
(c) Recours de lacheteur Il est de la seule discrtion dHorizon de dterminer si un produit prsentant un cas de garantie sera rpar ou chang. Ce sont l les recours exclusifs de lacheteur lorsquun dfaut est constat. Horizon se rserve la possibilit de vrifier tous les lments utiliss et susceptibles dtre intgrs dans le cas de garantie. La dcision de rparer ou de remplacer le produit est du seul ressort dHorizon. La garantie exclut les dfauts esthtiques ou les dfauts provoqus par des cas de force majeure, une manipulation incorrecte du produit, une utilisation incorrecte ou commerciale de ce dernier ou encore des modifications de quelque nature quelles soient. La garantie ne couvre pas les dgts rsultant dun montage ou dune manipulation errons, daccidents ou encore du fonctionnement ainsi que des tentatives dentretien ou de rparation non effectues par Horizon. Les retours effectus par le fait de lacheteur directement Horizon ou lune de ses reprsentations nationales requirent une confirmation crite. lIMITATION dES dGTS Horizon ne saurait tre tenu pour responsable de dommages consquents directs ou indirects, de pertes de revenus ou de pertes commerciales, lis de quelque manire que ce soit au produit et ce, indpendamment du fait quun recours puisse tre formul en relation avec un contrat, la garantie ou lobligation de garantie. Par ailleurs, Horizon nacceptera pas de recours issus dun cas de garantie lorsque ces recours dpassent la valeur unitaire du produit. Horizon nexerce aucune influence sur le montage, lutilisation ou la maintenance du produit ou sur dventuelles combinaisons de produits choisies par lacheteur. Horizon ne prend en compte aucune garantie et naccepte aucun recours pour les blessures ou les dommages pouvant en rsulter. En utilisant et en montant le produit, lacheteur accepte sans restriction ni rserve toutes les dispositions relatives la garantie figurant dans le prsent document. Si vous ntes pas prt, en tant quacheteur, accepter ces dispositions en relation avec lutilisation du produit, nous vous demandons de restituer au vendeur le produit complet, non utilis et dans son emballage dorigine. 16 MANUEL DUTILISATION SPEKTRUM DX2E FR QUESTIONS, ASSISTANcE ET RpARATIONS Votre revendeur spcialis local et le point de vente ne peuvent effectuer une estimation dligibilit lapplication de la garantie sans avoir consult Horizon. Cela vaut galement pour les rparations sous garantie. Vous voudrez bien, dans un tel cas, contacter le revendeur qui conviendra avec Horizon dune dcision approprie, destine vous aider le plus rapidement possible. MAINTENANcE ET RpARATION Si votre produit doit faire lobjet dune maintenance ou dune rparation, adressez-vous soit votre revendeur spcialis, soit directement Horizon. Emballez le produit soigneusement. Veuillez noter que le carton demballage dorigine ne suffit pas, en rgle gnrale, protger le produit des dgts pouvant survenir pendant le transport. Faites appel un service de messagerie proposant une fonction de suivi et une assurance, puisque Horizon ne prend aucune responsabilit pour lexpdition du produit jusqu sa rception accepte. Veuillez joindre une preuve dachat, une description dtaille des dfauts ainsi quune liste de tous les lments distincts envoys. Nous avons de plus besoin dune adresse complte, dun numro de tlphone (pour demander des renseignements) et dune adresse de courriel. GARANTIE ET RpARATIONS Les demandes en garantie seront uniquement traites en prsence dune preuve dachat originale manant dun revendeur spcialis agr, sur laquelle figurent le nom de lacheteur ainsi que la date dachat. Si le cas de garantie est confirm, le produit sera rpar Cette dcision relve uniquement de Horizon Hobby. RpARATIONS pAyANTES En cas de rparation payante, nous tablissons un devis que nous transmettons votre revendeur. La rparation sera seulement effectue aprs que nous ayons reu la confirmation du revendeur. Le prix de la rparation devra tre acquitt au revendeur. Pour les rparations payantes, nous facturons au minimum 30 minutes de travail en atelier ainsi que les frais de rexpdition. En labsence dun accord pour la rparation dans un dlai de 90 jours, nous nous rservons la possibilit de dtruire le produit ou de lutiliser autrement. ATTENTION: nous neffectuons de rparations payantes que pour les composants lectroniques et les moteurs. Les rparations touchant la mcanique, en particulier celles des hlicoptres et des voitures radiocommandes, sont extrmement coteuses et doivent par consquent tre effectues par lacheteur lui-mme. cOORdONNES dE GARANTIE ET RpARATIONS Pays dachat France Horizon Hobby Horizon Hobby SAS Adresse 14 Rue Gustave Eiffel Zone dActivit du Rveil Matin 91230 Montgeron INFORMATIONS dE cONTAcT pOUR lES pIcES Pays dachat France Horizon Hobby Horizon Hobby SAS Adresse 14 Rue Gustave Eiffel Zone dActivit du Rveil Matin 91230 Montgeron Numro de tlphone/Courriel
+33 (0) 1 60 47 44 70 infofrance@horizonhobby.com Numro de tlphone/Courriel
+33 (0) 1 60 47 44 70 infofrance@horizonhobby.com MANUEL DUTILISATION SPEKTRUM DX2E 17 FR INFORMATIONS dE cONFORMIT pOUR lUNION EUROpENNE Elimination dans lUnion Europenne Ce produit ne doit pas tre limin avec les ordures mnagres. Il est de la responsabilit de lutilisateur de remettre le produit un point de collecte officiel des dchets dquipements lectriques. Cette procdure permet de garantir le respect de lenvironnement et labsence de sol-
licitation excessive des ressources naturelles. Elle protge de plus le bien-tre de la communaut humaine. Pour plus dinformations quant aux lieux dliminations des dchets dquipements lectriques, vous pouvez contacter votre mai-
rie ou le service local de traitement des ordures mnagres. dclaration de conformit
(conformment la norme ISO/IEC 17050-1) No. HH2012010601 Product(s):
Spektrum DX2E/
Spektrum DX2E avec SR200 SPMR2300, SPM2300 2 Item Number(s):
Equipment class:
Lobjet de la dclaration dcrit ci-dessus est en conformit avec les exigences des spcifications numres ci-aprs, suivant les conditions de la directive ETRT 1999/5/CE Directive:
EN 300-328 V1.7.1 EN 301 489-1 V1.7.1: 2006 EN 301 489-17 V1.3.2: 2008 EN 60950-1:2006+A11 Sign en nom et pour le compte de:
Horizon Hobby, Inc. Champaign, IL USA 6 janvier 2012 Steven A. Hall Vice President Gestion Internationale des Activits et des Risques Horizon Hobby, Inc. 18 MANUEL DUTILISATION SPEKTRUM DX2E IT AVVISO Tutte le istruzioni, le garanzie e gli altri documenti pertinenti sono soggetti a cambiamenti a totale discrezione di Horizon Hobby, Inc. Per una documentazione aggiornata sul prodotto, visitare il sito horizonhobby.com e fare clic sulla sezione Support del prodotto. Significato dei termini usati Nella documentazione relativa al prodotto vengono utilizzati i seguenti termini per indicare i vari livelli di pericolo potenziale durante luso del prodotto:
AVVISO: indica procedure che, se non debitamente seguite, possono determinare il rischio di danni alle cose E il rischio minimo o nullo di lesioni alle persone. ATTENZIONE: indica procedure che, se non debitamente seguite, determinano il rischio di danni alle cose E di gravi lesioni alle persone. AVVERTENZA: indica procedure che, se non debitamente seguite, determinano il rischio di danni alle cose, danni collaterali e gravi lesioni alle persone o il rischio elevato di lesioni superficiali alle persone. AVVERTENZA: Leggere TUTTO il manuale di istruzioni e familiarizzare con le caratteristiche del prodotto prima di farlo funzionare. Un uso improprio del prodotto puo` causare danni al prodotto stesso e alle altre cose e gravi lesioni alle persone. Questo aeromodello e` un prodotto sofisticato per appassionati di modellismo. Deve essere azionato in maniera attenta e responsabile e richiede alcune conoscenze basilari di meccanica. Luso improprio o irresponsabile di questo prodotto puo`
causare lesioni alle persone e danni al prodotto stesso o alle altre cose. Questo prodotto non deve essere utilizzato dai bambini senza la diretta supervisione di un adulto. Non tentare di smontare, utilizzare componenti incompatibili o modificare il prodotto in nessun caso senza previa approvazione di Horizon Hobby, Inc. Questo manuale contiene le istruzioni per la sicurezza, luso e la manutenzione del prodotto. E` fondamentale leggere e seguire tutte le istruzioni e le avvertenze del manuale prima di montare, impostare o utilizzare il prodotto, al fine di utilizzarlo correttamente e di evitare di causare danni alle cose o gravi lesioni alle persone. ATTENZIONE PER I PROdOTTI cONTRAFFATTI:
Grazie per aver acquistato questo prodotto Spektrum genuino. Raccomandiamo di acquistare sempre da rivenditori autorizzati Horizon per essere sicuri di avere un prodotto originale di alta qualit. Horizon rifiuta qualsiasi tipo di assistenza in garanzia di prodotti contraffatti o che dichiarano compatibilit con DSM o Spektrum. Almeno 14 anni. Non un giocattolo. AVVISO: Questo prodotto rivolto esclusivamente a veicoli ed aerei di tipo hobbistico senza pilota a bordo e controllati a distanza. Al di fuori di questo utilizzo, Horizon Hobby declina ogni responsabilit e non riconosce interventi in garanzia. ImPOSTAZIONI RF PER lA FRANcIA:
La radio DX2E ha la possibilit di impostare la RF per essere compatibile con le regole francesi. Se ci si trova in Francia, e si opera allesterno, bisogna impostare i parametri della RF specifici. Si veda a pagina 3 per ulteriori informazioni. REgISTRAZIONE dEllA gARANZIA Visitare oggi stesso il sito www.spektrumrc.com/registration per registrare il prodotto. INSTAllAZIONE dEllE bATTERIE NEl TRASmETTITORE lEd INdIcATORE dEllA bATTERIA P O W E R ST. TRIM ST. RATE Verde fisso Verde lampeggiante TH. TRIM La batteria buona (sopra 4V) La tensione della batteria troppo bassa. Sostituire le batterie
(inferiore a 4V) SPEKTRUM DX2E MANUALE DELLUTENTE 19 IT cOmPATIbIlIT dEl RIcEVITORE La DX2E compatibile con tutti i ricevitori Spektrum DSM, DSM2 marini e di superficie. cOllEgAmENTI Al RIcEVITORE E INSTAllAZIONE SR200 THR STR BIND Antenna LED Motore Sterzo Presa batteria/bind Connettore per bind 1. Con il ricevitore spento inserire il connettore per il bind nella presa dedicata sul ricevitore. 2. Alimentare il ricevitore attraverso una porta qualsiasi. Il LED verde lampeggia continuamente indicando che il ricevitore nel modo bind. 3. Con il volantino dello sterzo e il grilletto del motore posizionati per il fail-safe (vedi la sezione riguardante il Fail-Safe per maggiori informazioni), accendere il trasmettitore tenendo premuto il suo pulsante di bind. Il LED verde, posto nella parte anteriore del trasmettitore, lampegger entro 3 secondi indicando che il trasmettitore nel modo bind. Rilasciare il pulsante di bind mentre il LED verde sta lampeggiando. Mantenere i comandi in posizione di fail-safe finch la procedura non terminata. Bouton Bind (affectation) INSTAllAZIONE cON mOTORE ElETTRIcO Batteria Al motore BIND ST TH N R N R Regolatore elettronico di velocit Ricevitore 2.4Ghz DSM SR200 SPORT SURFACE RECEIVER THR STR BIND Servo dello sterzo INSTAllAZIONE cON mOTORE A ScOPPIO Ricevitore 2.4Ghz DSM SR200 SPORT SURFACE RECEIVER THR STR BIND Servo del motore Servo dello sterzo Batteria Montare il ricevitore sul veicolo usando spugna biadesiva per servi, in questo modo il ricevitore sta al suo posto e viene anche isolato dalle vibrazioni. Montare lantenna nella parte alta del veicolo usando un tubetto per tenerla lontano dal telaio, pi alta e meglio riceve il segnale. AVVISO: Non tagliare lantenna. cONNESSIONE
(bINdINg) dEl RIcEVITORE Questa procedura programma il ricevitore a riconoscere il numero unico GUID del suo trasmettitore. Una volta connesso, il ricevitore risponder solo a quel trasmettitore. Il DX2E e lSR200 sono gi connessi (bound) in fabbrica, per se fosse necessario, possibile rifare la connessione
(rebind) seguendo la procedura:
4. Il LED sul ricevitore resta acceso fisso quando trasmettitore e ricevitore sono connessi. 5. Togliere il connettore per il bind e conservarlo accuratamente. Bisogna rifare questa operazione quando:
Si desidera una posizione diversa del Failsafe, per esempio quando si inverte la corsa di motore e/o sterzo. Si cambia tipo di ricevitore. Si vuole connettere il ricevitore ad un altro trasmettitore. Alcuni ricevitori Spektrum, come lo SR3001, per il bind usano un pulsante invece del connettore. Con questo ricevitore il procedimento di connessione (binding) lo stesso, per, invece di inserire il connettore prima di accendere il ricevitore, bisogna premere il pulsante mentre si accende il ricevitore. FAIlSAFE Limpostazione del fail-safe si fa durante la connessione
(binding). Nel malaugurato caso che si perda il collegamento radio durante il funzionamento, il ricevitore mander i servi nella posizione stabilita per il fail-safe (normalmente freno al massimo e sterzo diritto). Quando il segnale del trasmettitore viene di nuovo ricevuto, i servi tornano a funzionare normalmente. Per ulteriori informazioni si veda la sezione riguardante il binding. INVERSIONE dEI SERVI Se con un comando dello sterzo a destra le ruote vanno verso sinistra (o viceversa), allora bisogna invertire il canale dello sterzo. Per fare questo basta spostare linterruttore relativo da una posizione allaltra (N sta per normale, R sta per reverse), aiutandosi con un piccolo cacciavite. 20 SPEKTRUM DX2E MANUALE DELLUTENTE IT mOdO RF Il trasmettitore DX2E ha un modo RF che rispetta la regolamentazione francese, quindi va impostato sul modo Francia solo quando lo si usa allesterno sul territorio francese. Altrimenti va sempre sul modo Standard. mOdO FRANcIA Ruotare il volantino tutto a sinistra, tirare il grilletto al massimo e premere il pulsante di bind mentre si accende il trasmettitore. Il LED verde lampeggia 2 volte. mOdO STANdARd Ruotare il volantino tutto a destra, tirare il grilletto al massimo e premere il pulsante di bind mentre si accende il trasmettitore. Il LED verde lampeggia 1 volta. NOTE gENERAlI I modelli radiocomandati sono molto piacevoli e divertenti. Per, se non usati con le dovute cautele e con la giusta manutenzione, possono essere fonte di pericolo. Per prima cosa importante installare correttamente il radiocomando. Poi bisogna essere in grado di controllare con sicurezza il modello in ogni condizione. Se si alle prime armi bisogna chiedere aiuto a modellisti esperti o al rivenditore locale. PuNTI dA RISPETTARE PER lA SIcuREZZA Accertarsi che le batterie del trasmettitore e del ricevitore ST. RATE siano ben cariche. Verificare i servi e le loro connessioni prima di usare il modello. Non usare il modello vicino a spettatori, aree di parcheggio o altre situazioni che possano recare danno a persone o cose. Non usare il modello in condizioni meteorologiche avverse. Una scarsa visibilit pu creare disorientamento e perdita di controllo del modello. ST. RATE Non puntare lantenna verso il modello, perch quello il punto di minore irraggiamento e quindi la portata molto ridotta. Non prendere rischi. Se in qualsiasi momento si notano comportamenti del modello strani o pericolosi, bisogna fermarsi finch non si individua e si corregge la causa del problema. La sicurezza non pu essere presa alla leggera. Interruttore reverse Sterzo Interruttore reverse Motore BIND ST TH N R N R TRIm dEllO STERZO Serve per una regolazione fine dello sterzo quando il volantino sta al centro in posizione di riposo. Normalmente il trim dello sterzo si regola per far procedere diritto il veicolo. Manopola trim sterzo P O W E R ST. TRIM TH. TRIM TRIm dEl ThROTTlE La manopola del trim del throttle usata per regolarlo quando la barre del throttle rilasciata (posizione neutra). Normalmente si utilizza per regolare i freni. Ruotando la manopola si cambia il trim del throttle (throttle in posizione ferma). Manopola trim motore P O W E R ST. TRIM TH. TRIM cORSA dEllO STERZO Conosciuto anche come dual rate, grazie al tipo di comando, permette una regolazione dello sterzo durante la corsa. In pratica limita lescursione del servo dello sterzo che comunque non potr superare il 100%. Manopola riduzione sterzo ST. RATE ST. TRIM TH. TRIM SPEKTRUM DX2E MANUALE DELLUTENTE 21 IT guIdA AllA RISOluZIONE dEI PROblEmI Problema Possible causa Soluzione Il sistema non si col-
lega La trasmittente e la ricevente sono troppo vicine Spostare la trasmittente da 2,4 a 3,6 metri dalla ricevente La trasmittente e la ricevente sono troppo vicine a dei grandi oggetti metallici (veicoli, ecc.) Il modello selezionato non collegato alla trasmittente Allontanarsi dai grandi oggetti metallici
(veicoli, ecc.) Assicurarsi che sia stata selezionata la memoria di modello corretta e che la trasmittente sia collegata al modello La trasmittente stata messa in modalit col-
legamento e la ricevente non pi collegata Rifare il collegamento tra trasmittente e ricevente Controllare lantenna della ricevente e assicu-
rarsi che non sia tagliata o danneggiata Sostituirla o contattare il servizio di assistenza Horizon Assicurarsi che lantenna della ricevente si trovi in un tubetto per antenne, al di sopra del veicolo Tensione della batteria bassa Ricaricare completamente le batterie I cavi o i connettori tra batteria e ricevente sono danneggiati o lenti Controllare i cavi e le connessioni tra batteria e ricevente. Riparare o sostituire i cavi e/o i connettori La ricevente va in modalit Failsafe a poca distanza dalla trasmittente La ricevente smette di rispondere durante lutilizzo PERIOdO dI gARANZIA gARANZIA EScluSIVA Horizon Hobby, Inc., (Horizon) garantisce che i prodotti acquistati (il Prodotto) sono privi di difetti relativi ai materiali e di eventuali errori di montaggio. Il periodo di garanzia conforme alle disposizioni legali del paese nel quale il prodotto stato acquistato. Tale periodo di garanzia ammonta a 6 mesi e si estende ad altri 18 mesi dopo tale termine. lImITI dEllA gARANZIA
(a) La garanzia limitata allacquirente originale (Acquirente) e non cedibile a terzi. Lacquirente ha il diritto a far riparare o a far sostituire la merce durante il periodo di questa garanzia. La garanzia copre solo quei prodotti acquistati presso un rivenditore autorizzato Horizon. Altre transazioni di terze parti non sono coperte da questa garanzia. La prova di acquisto necessaria per far valere il diritto di garanzia. Inoltre, Horizon si riserva il diritto di cambiare o modificare i termini di questa garanzia senza alcun preavviso e di escludere tutte le altre garanzie gi esistenti.
(b) Horizon non si assume alcuna garanzia per la disponibilit del prodotto, per ladeguatezza o lidoneit del prodotto a particolari previsti dallutente. sola responsabilit dellacquirente il fatto di verificare se il prodotto adatto agli scopi da lui previsti.
(c) Richiesta dellacquirente spetta soltanto a Horizon, a propria discrezione riparare o sostituire qualsiasi prodotto considerato difettoso e che rientra nei termini di garanzia. queste sono le uniche rivalse a cui lacquirente si pu appellare, se un prodotto difettoso. Horizon si riserva il diritto di controllare qualsiasi componente utilizzato che viene coinvolto nella rivalsa di garanzia. Le decisioni relative alla sostituzione o alla riparazione avvengono solo in base alla discrezione di Horizon. Questa garanzia non copre dei danni superficiali o danni per cause di forza maggiore, uso errato del prodotto, negligenza, uso ai fini commerciali, o una qualsiasi modifica a qualsiasi parte del prodotto. Questa garanzia non copre danni dovuti ad una installazione errata, ad un funzionamento errato, ad una manutenzione o un tentativo di riparazione non idonei a cura di soggetti diversi da Horizon. La restituzione del prodotto a cura dellacquirente, o da un suo rappresentante, deve essere approvata per iscritto dalla Horizon. lImITI dI dANNO Horizon non si riterr responsabile per danni speciali, diretti, indiretti o consequenziali; perdita di profitto o di produzione; perdita commerciale connessa al prodotto, indipendentemente dal fatto che la richiesta si basa su un contratto o sulla garanzia. Inoltre la responsabilit di Horizon non supera mai in nessun caso il prezzo di acquisto del prodotto per il quale si chiede la responsabilit. Horizon non ha alcun controllo sul montaggio, sullutilizzo o sulla manutenzione del prodotto o di combinazioni di vari prodotti. Quindi Horizon non accetta nessuna responsabilit per danni o lesioni derivanti da tali circostanze. Con lutilizzo e il montaggio del prodotto lutente acconsente a tutte le condizioni, limitazioni e riserve di garanzia citate in questa sede. Qualora lutente non fosse pronto ad assumersi tale responsabilit associata alluso del prodotto, si suggerisce di di restituire il prodotto intatto, mai usato e immediatamente presso il venditore. 22 SPEKTRUM DX2E MANUALE DELLUTENTE INdIcAZIONI dI SIcuREZZA Questo un prodotto sofisticato di hobbistica e non un giocattolo. Esso deve essere manipolato con cautela, con giudizio e richiede delle conoscenze basilari di meccanica e delle facolt mentali di base. Se il prodotto non verr manipolato in maniera sicura e responsabile potrebbero risultare delle lesioni, dei gravi danni a persone, al prodotto o allambiente circostante. Questo prodotto non concepito per essere usato dai bambini senza una diretta supervisione di un adulto. Il manuale del prodotto contiene le istruzioni di sicurezza, di funzionamento e di manutenzione del prodotto stesso. fondamentale leggere e seguire tutte le istruzioni e le avvertenze nel manuale prima di mettere in funzione il prodotto. Solo cos si eviter un utilizzo errato e di preverranno incidenti, lesioni o danni. dOmANdE, ASSISTENZA E RIPARAZIONI Il vostro negozio locale e/o luogo di acquisto non possono fornire garanzie di assistenza o riparazione senza previo colloquio con Horizon. questo vale anche per le riparazioni in garanzia. Quindi in tale casi bisogna interpellare un rivenditore, che si metter in contatto subito con Horizon per prendere una decisione che vi possa aiutare nel pi breve tempo possibile. mANuTENZIONE E RIPARAZIONE Se il prodotto deve essere ispezionato o riparato, si prega di rivolgersi ad un rivenditore specializzato o direttamente ad Horizon. il prodotto deve essere Imballato con cura. Bisogna far notare che i box originali solitamente non sono adatti per effettuare una spedizione senza subire alcun danno. Bisogna effettuare una spedizione via corriere che fornisce IT una tracciabilit e unassicurazione, in quanto Horizon non si assume alcuna responsabilit in relazione alla spedizione del prodotto. Inserire il prodotto in una busta assieme ad una descrizione dettagliata degli errori e ad una lista di tutti i singoli componenti spediti. Inoltre abbiasmo bisogno di un indirizzo completo, di un numnero di telefono per chiedere ulteriori domande e di un indirizzo e-mail. gARANZIA A RIPARAZIONE Le richieste in garanzia verranno elaborate solo se presente una prova dacquisto in originale proveniente da un rivenditore specializzato autorizzato, nella quale ben visibile la data di acquisto. Se la garanzia viene confermata, allora il prodotto verr riparato o sostituito. Questa decisione spetta esclusivamente a Horizon Hobby. RIPARAZIONI A PAgAmENTO Se bisogna effettuare una riparazione a pagamento, effettueremo un preventivo che verr inoltrato al vostro rivenditore. La riparazione verr effettuata dopo lautorizzazione da parte del vostro rivenditore. La somma per la riparazione dovr essere pagata al vostro rivenditore. Le riparazioni a pagamento avranno un costo minimo di 30 minuti di lavoro e in fattura includeranno le spese di restituzione. Qualsiasi riparazione non pagata e non richiesta entro 90 giorni verr considerata abbandonata e verr gestita di conseguenza. ATTENZIONE: Le riparazioni a pagamento sono disponibili solo sullelettronica e sui motori. Le riparazioni a livello meccanico, soprattutto per gli elicotteri e le vetture RC sono molto costose e devono essere effettuate autonomamente dallacquirente. gARANZIA E REVISIONA INFORmAZIONI PER I cONTATTI Stato in cui il prodotto stato acquistato Horizon Hobby Indirizzo Christian-Junge-Strae 1 25337 Elmshorn, Germania Telefono/Indirizzo e-mail
+49 (0) 4121 2655 100 service@horizonhobby.de Germania Horizon Technischer Service INFORmAZIONI dI SERVIZIO clIENTI Stato in cui il prodotto stato acquistato Horizon Hobby Germania Horizon Technischer Service Indirizzo Christian-Junge-Strae 1 25337 Elmshorn, Germania Telefono/Indirizzo e-mail
+49 4121 46199 60 service@horizonhobby.de SPEKTRUM DX2E MANUALE DELLUTENTE 23 IT INFORmAZIONI SullA cONFORmIT PER luNIONE EuROPEA Smaltimento allinterno dellunione Europea Questo prodotto non deve essere smaltito assieme ai rifiuti domestici. Al contrario, responsabilit dellutente lo smaltimento di tali rifiuti, che devono essere portati in un centro di raccolta designato per il riciclaggio di rifiuti elettrici e apparecchiature elettroniche. La raccolta differenziata e il riciclaggio di tali rifiuti provenienti da apparecchiature nel momento dello smaltimento aiuteranno apreservare le risorse naturali e garantiranno un riciclaggio adatto aproteg-
gere il benessere delluomo e dellambiente. Per maggiori informazioni sui punti di riciclaggio si prega di contattare il proprio ufficio locale, il servizio di smaltimento rifiuti oil negozio presso il quale stato acquistato il prodotto. dichiarazione di conformit
(in conformit con ISO/IEC 17050-1) No. HH2012010601 Spektrum DX2E/DX2E con SR200 Prodotto(i):
Numero(i) articolo: SPMR2300, SPM2300 Classe dei dispositivi: 2 Gli oggetti presentati nella dichiarazione sopra citata sono conformi ai requisiti delle specifi che elencate qui di seguito, seguendo le disposizioni della direttiva europea R&TTE 1999/5/EC EN 300-328 V1.7.1:2006 EN 301 489-1 V1.7.1: 2006 EN 301 489-17 V1.3.2: 2008 EN 60950-1:2006+A1:2010 Firmato per conto di:
Horizon Hobby, Inc. Champaign, IL USA 6 gennaio 2011 Steven A. Hall Vice Presidente Operazioni internazionali e Gestione dei rischi Horizon Hobby, Inc. 34949 Printed: 12/2011 Horizon Hobby, Inc. The Spektrum trademark is used with permission of Bachmann Industries, Inc. US 7,391,320. Other patents pending. 24 SPEKTRUM DX2E MANUALE DELLUTENTE IC Radiation Exposure Statement for Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-08-27 | 2402 ~ 2478 | DTS - Digital Transmission System | Class II permissive change or modification of presently authorized equipment |
2 | 2012-12-18 | 2418 ~ 2460 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2014-08-27
|
||||
1 2 |
2012-12-18
|
|||||
1 2 | Applicant's complete, legal business name |
Horizon Hobby, LLC
|
||||
1 2 | FCC Registration Number (FRN) |
0006301931
|
||||
1 2 | Physical Address |
2904 Research Rd.
|
||||
1 2 |
Champaign, Illinois 61821
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
b******@baclcorp.com
|
||||
1 2 |
h******@acbcert.com
|
|||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
BRW
|
||||
1 2 | Equipment Product Code |
DSTX1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
C******** D****
|
||||
1 2 | Title |
President and EVP Product Management and Marketing
|
||||
1 2 | Telephone Number |
217-4********
|
||||
1 2 | Fax Number |
217-4********
|
||||
1 2 |
c******@horizonhobby.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
QuieTek Technology (Suzhou) Co.,Ltd.
|
||||
1 2 | Name |
M****** C******
|
||||
1 2 | Physical Address |
No.99 Hongye RD.Suzhou Industrial Park
|
||||
1 2 |
Suzhou, 215006
|
|||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
86-05******** Extension:
|
||||
1 2 | Fax Number |
86-05********
|
||||
1 2 |
m******@quietek.com.cn
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
QuieTek Technology (Suzhou) Co.,Ltd.
|
||||
1 2 | Name |
N****** L******
|
||||
1 2 | Physical Address |
No.99 Hongye RD.Suzhou Industrial Park
|
||||
1 2 |
Suzhou, 215006
|
|||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
86-05******** Extension:
|
||||
1 2 | Fax Number |
86-05********
|
||||
1 2 |
s******@quietek.com.cn
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 | Yes | |||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Surface Radio | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 | Original Equipment | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Class II Permissive Change of extending frequency range described in this filing. Power output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 | Power Output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Radiometrics Midwest Corp.
|
||||
1 2 |
DEKRA Testing and Certification (Suzhou) Co., Ltd.
|
|||||
1 2 | Name |
J**** S********
|
||||
1 2 |
J****** P********
|
|||||
1 2 | Telephone Number |
81529********
|
||||
1 2 |
86-51******** Extension:
|
|||||
1 2 | Fax Number |
81529********
|
||||
1 2 |
86-51********
|
|||||
1 2 |
j******@radiomet.com
|
|||||
1 2 |
j******@quietek.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2478.00000000 | 0.0740000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2418.00000000 | 2460.00000000 | 0.0740000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC