all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 1.89 MiB | October 06 2016 | |||
1 | Cover Letter(s) | October 06 2016 | ||||||
1 | Cover Letter(s) | October 06 2016 | ||||||
1 | External Photos | October 06 2016 | ||||||
1 | Internal Photos | October 06 2016 | ||||||
1 | ID Label/Location Info | October 06 2016 | ||||||
1 | Test Report | October 06 2016 | ||||||
1 | Test Setup Photos | October 06 2016 |
1 | Users Manual | Users Manual | 1.89 MiB | October 06 2016 |
SR4000T/SR6000T Telemetry Receiver Instruction Manual Telemetrie Empfnger Rcepteur avec tlmtrie intgre Ricevente con Telemetria EN NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com and click on the support tab for this product. Meaning of Special Language The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:
NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no possibility of injury. CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury. WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high probability of superficial injury. Age Recommendation: Not for children under 14 years. This is not a toy. WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to oper-
ate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not attempt disassembly, use with Incompatible components or augment product in any way without the approval of Horizon Hobby, LLC. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instruc-
tions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury. WARNING AGAINST COUNTERFEIT PRODUCTS Always purchase from a Horizon Hobby, LLC authorized dealer to ensure authentic high-quality Spektrum product. Horizon Hobby, LLC disclaims all support and warranty with regards, but not limited to, compatibility and performance of counterfeit products or products claiming compatibility with DSM or Spektrum technology. NOTICE: This product is only intended for use with unmanned, hobby-grade, remote-controlled vehicles and aircraft. Horizon Hobby disclaims all liability outside of the intended purpose and will not provide warranty service related thereto. WARRANTY REGISTRATION Visit www.community.spektrumrc.com today to register your product. EN Water-Resistant Component Your new Horizon Hobby SR4000T/SR6000T Telemetry Receiver has a special water-resistant coating on the electronics to ensure reliable performance in higher than average moisture conditions. This conformal coating can offer mild protection from light drops of water. DO NOT submerge this product under water for any period of time. If it is submerged, it may result in damage or loss of function. DO NOT pour water onto or allow excess water to come in direct contact with the product. DO NOT operate this product in heavy rain or snow. DO NOT expose this product to salt water (ocean water or water on salt-
covered roads), contaminated or polluted water. In case of excess exposure to water or debris, immediately wipe down the SR4000T/SR6000T with a soft cloth, and allow it to fully dry before next use. NOTICE: Never use a pressure washer to clean your vehicle. NOTICE: Make sure the other components in your vehicle are waterproof or water-resistant before driving in wet conditions. SR4000T/SR6000T Telemetry Receiver The Spektrum SR4000T/SR6000T Telemetry Receiver is compatible with all Spektrum DSMR surface transmitters. Telemetry functions require a Spektrum transmitter capable of telemetry. Specifications Type: DSMR with internal telemetry Dimensions (LxWxH): 1.5 x 1.1 x 0.6 in (37.5 x 27.7 x 15.7mm) Antenna Length: 8.27 in (210mm) Channels: 4 (SR4000T): 6 (SR6000T) Weight: 0.3 oz (9.2 g) Band: 2.4GHz Voltage Range: 3.59.6V A: Voltage sensor port B: Temperature sensor port C: Bind Button D: Antenna E: RPM sensor port F: XBUS Port G: Servo ports-
Bind/Battery Steering Throttle Aux1-Aux4
(SR4000T: Aux1, Aux2) A B C D G E F EN Receiver Installation and Setup Install the Receiver in your vehicle using double-sided foam servo tape. Foam servo tape will hold the receiver in place and help isolate it from vibrations. Mount the antenna up and away from the vehicle. The higher up the antenna is, the better signal it will receive. NOTICE: Do not cut or modify the antenna. Powering the receiver with a separate receiver pack Receiver Throttle Servo Steering Servo Battery Powering the receiver with an ESC Battery To Motor Receiver Electronic Speed Control Steering Servo Failsafe Failsafe position is set during binding. In the unlikely event that the radio link is lost during use, the receiver will drive all channels to its pre-programmed failsafe position (normally neutral or full brakes). If the receiver is powered on prior to turning on the transmitter, the receiver will enter the failsafe mode, driving the throttle channel to its preset failsafe position. When the transmitter is turned on, normal control is resumed. IMPORTANT: Failsafe activates only in the event that signal is lost from the transmitter. Failsafe will NOT activate in the event that receiver battery power decreases below the recommended minimums or power to the receiver is lost. EN Binding Receiver to Transmitter In order to operate, the receiver must be bound to the transmitter. Binding is the process of programming the receiver to recognize the GUID (Globally Unique Identifier) code of a single specific transmitter. When areceiver is bound to atransmitter/model memory, the receiver will only respond to that specific transmitter/model memory. Binding 1. Push and hold the bind button on the receiver while powering up the receiver. The orange LED will flash continuously, indicating that the receiver is in bind mode. Tip: It is possible to use a bind blug in the BIND/BATT port if desired. 2. With all channels in the desired preset failsafe position (normally neutral), put your transmitter in bind mode. Continue holding the failsafe position until the binding process is complete. 3. The bind process is complete when the orange LED on the receiver is solid. CAUTION: When the bind process is complete, the throttle and steering channels are active. Keep hands and loose objects away from all spinning parts on the vehicle. You must rebind the transmitter and receiver if you:
change the servo reverse after binding. want to use the receiver with a different model memory. are using the receiver with a DSMR transmitter and you change the frame rate in the transmitter. are using the receiver in 5.5ms and want telemetry, you must rebind in 11ms. Aux channels The Aux channels can operate as extra servo channels, or as a power supply for a personal transponder. If 5.5ms frame rate is selected in the transmitter, only two channels, Steering and Throttle, are operational. The Aux channels can be used to power a personal transponder or lights. If a frame rate other than 5.5ms is selected, the Aux channels will operate as extra servo channels. IMPORTANT: When using the receiver with a DSMR transmitter, you must re-bind any time you change the frame rate in the transmitter. NOTICE: The DX4R Pro or DX6R are required for 5.5ms frame rate. EN Telemetry The Spektrum SR4000T/SR6000T Telemetry Receiver features 4 integrated telemetry ports that are compatible with Spektrum telemetry capable transmitters. The Telemetry ports include:
The Spektrum SR4000T/SR6000T Telemetry Receiver has the Voltage Sensor and the Temperature Sensors included in the box. Voltage Sensor Voltage Temperature RPM XBus Port (Connect additonal telemetry sensors) Plug the voltage sensor (SPMA9570) into the VOLT port on the SR4000T/SR6000T. Attach the stripped end of the wire to the -Negative (Black) wire of the voltage source. Typically, you would solder the wire to the battery connector. Temperature Sensor Plug the Temperature sensor (SPMA9571) into the TEMP port on the SR4000T/SR6000T. Loop the wire around the head of a nitro/gas engine, snugging the plastic sleeve to secure the wire. The mounting position on nitro/gas engines will result in different temperature readings. Experiment with different posistions on the engine head for best results. Loop the wire around a battery pack or electric motor and secure in place with tape. For information on installing other Spektrum Telemetry Sensors visit http://www.spektrumrc.com EN 2.4GHz Troubleshooting Guide Solution Problem Move transmitter 8 to 12 The system will not connect feet away from receiver Possible Cause Your transmitter and re-
ceiver are too close together You are near metal objects Move to an area with less metal The receiver goes into failsafe mode a short distance away from the trans-
mitter The receiver stops responding during operation The receiver is bound to a different model memory Your transmitter was placed into bind mode and is no longer bound to your receiver Check for damage on the receiver antenna Low receiver battery voltage If the battery voltage is low, it may drop below 3.5V momentarily, causing the receiver to brown-out, then reconnect Make sure the correct model memory is active in your transmitter Rebind your transmitter and receiver Make sure your receiver an-
tenna is in an antenna tube and is above the vehicle Replace the receiver or contact Horizon Product Support Charge the receiver or vehicle battery. Spektrum receivers require at least 3.5V to operate Loose or damaged wires or connectors between battery and receiver Check the wires and connection between the battery and receiver. Repair or replace wires and/or connectors EN 1-Year Limited Warranty What this Warranty Covers - Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product purchased (the Product) will be free from defects in materials and workmanship for a period of 1 year from the date of purchase. What is Not Covered This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modification of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer, (vi) Product not compliant with applicable technical regulations, or (vii) use that violates any applicable laws, rules, or regulations. OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASERS INTENDED USE. Purchasers Remedy Horizons sole obligation and purchasers sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASERS SOLE AND EXCLUSIVE REMEDY. Limitation of Liability HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase. EN Law These terms are governed by Illinois law (without regard to conflict of law principals). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice. WARRANTY SERVICES Questions, Assistance, and Services Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call the toll free telephone number referenced in the Warranty and Service Contact Information section to speak with a Product Support representative. Inspection or Services If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby. com/content/_service-center_render-service-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton. NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with a LiPo battery, please contact the appropriate Horizon Product Support office. Warranty Requirements For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon. EN Non-Warranty Service Should your service not be covered by warranty, service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashiers checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizons Terms and Conditions found on our website http://www.horizonhobby.com/content/_service-center_render-
service-center. ATTENTION: Horizon service is limited to Product compliant in the country of use and ownership. If received, a non-compliant Product will not be serviced. Further, the sender will be responsible for arranging return shipment of the un-serviced Product, through a carrier of the senders choice and at the senders expense. Horizon will hold non-compliant Product for a period of 60 days from notification, after which it will be discarded. Warranty, Service and Customer Service Contact Information 5-14-2015 Country of Purchase United States of America United Kingdom Horizon Hobby Contact Information Address Horizon Service Center
(Repairs and Repair Requests) Horizon Product Support
(Product Technical Assistance) servicecenter.horizonhobby. com/RequestForm/
productsupport@horizonhobby. com. 877-504-0233 4105 Fieldstone Rd Champaign, Illinois, 61822 USA Sales websales@horizonhobby.com 800-338-4639 Service/Parts/Sales:
Horizon Hobby Limited Germany Horizon Technischer Service Sales: Horizon Hobby GmbH sales@horizonhobby.co.uk
+44 (0) 1279 641 097 service@horizonhobby.de
+49 (0) 4121 2655 100 Units 14, Ployters Rd, Staple Tye, Harlow Essex, CM18 7NS United Kingdom Christian-Junge-
Strae 1 25337 Elmshorn, Germany France Service/Parts/Sales:
Horizon Hobby SAS infofrance@horizonhobby.com
+33 (0) 1 60 18 34 90 11 Rue Georges Charpak 77127 Lieusaint, France EN FCC Information This equipment has been tested and found to comply with the limits for a Class B digi-
tal device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. This device complies with part 15 of the FCC rules. Operation is subject to the follow-
ing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: Modifications to this product will void the users authority to operate this equipment. This product contains a radio transmitter with wireless technology which has been tested and found to be compliant with the applicable regulations governing a radio transmitter in the 2.400GHz to 2.4835GHz frequency range. IC Information This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, Including interference that may cause undesired operation of the device. Compliance Information for the European Union Horizon Hobby, LLC hereby declares that this product is in compliance with the essential requirements and other relevant provisions of the R&TTE Directive. A copy of the EU Declaration of Conformity is available online at:
http://www.horizonhobby.com/content/support-render-compliance. Instructions for Disposal of WEEE by Users in the European Union This product must not be disposed of with other waste. Instead, it is the usersresponsibility to dispose of their waste equipment by handing it over to adesignated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in amanner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or where you purchased the product. DE HINWEIS Alle Anweisungen, Garantien und anderen zugehrigen Dokumente knnen im eigenen Ermessen von Horizon Hobby, LLC jederzeit gendert werden. Die aktuelle Produktliteratur finden Sie auf horizonhobby.com unter der Registerkarte Support fr das betreffende Produkt. Die folgenden Begriffe werden in der gesamten Produktliteratur verwendet, um auf unterschiedlich hohe Gefahrenrisiken beim Betrieb dieses Produkts hinzuweisen:
HINWEIS: Wenn diese Verfahren nicht korrekt befolgt werden, knnen sich mglicherweise Sachschden UND eine geringe oder keine Gefahr von Verlet-
zungen ergeben. ACHTUNG: Wenn diese Verfahren nicht korrekt befolgt werden, ergeben sich wahrscheinlich Sachschden UND die Gefahr von schweren Verletzungen. WARNUNG: Wenn diese Verfahren nicht korrekt befolgt werden, ergeben sich wahrscheinlich Sachschden, Kollateralschden und schwere Verletzungen ODER mit hoher Wahrscheinlichkeit oberflchliche Verletzungen. Nicht geeignet fr Kinder unter 14 Jahren. Dies ist kein Spielzeug. WARNUNG: Lesen Sie die GESAMTE Bedienungsanleitung durch, um sich vor der Inbetriebnahme mit den Funktionen des Produkts vertraut zu machen. Wird dieses Produkt nicht korrekt betrieben, kann dies zu Schden am Produkt oder anderen Sachschden und zu schweren Verletzungen fhren. Dies ist ein hochentwickeltes Hobbyprodukt und KEIN Spielzeug. Es muss mit Vorsicht und gesundem Menschenverstand betrieben werden und er-
fordert gewisse technische Grundfhigkeiten. Wird dieses Produkt nicht auf eine sichere und verantwortungsvolle Weise betrieben, kann dies zu Verlet-
zungen oder Schden am Produkt oder anderen Sachwerten fhren. Dieses Produkt eignet sich nicht fr die Verwendung durch Kinder ohne direkte berwachung eines Erwachsenen. Versuchen Sie nicht ohne Genehmigung durch Horizon Hobby, LLC, das Produkt zu zerlegen, es mit inkompatiblen Komponenten zu verwenden oder auf jegliche Weise zu erweitern. Diese Bedienungsanleitung enthlt Anweisungen fr Sicherheit, Betrieb und Wartung. Es ist unbedingt notwendig, vor Zusammenbau, Einrichtung oder Verwendung alle Anweisungen und Warnhinweise im Handbuch zu lesen und zu befolgen, damit das Produkt bestimmungsgem betrieben werden kann und Schden oder schwere Verletzungen vermieden werden. WARNUNG zU GEflSCHTEN PRoDUKTEN Bitte kaufen Sie Ihre Spektrum Produkte immer von einem autorisiertem Hndler um sicherzu stellen, dass Sie ein authentisches hochqualita-
tives original Spektrum Produkt gekauft haben. Horizon Hobby lehnt jede Untersttzung, Service oder Garantieleistung von geflschten Produkten oder Produkten ab die von sich in Anspruch nehmen kompatibel mit Spektrum oder DSM zu sein. HINWEIS: Dieses Produkt ist ausschlielich fr die Verwendung in unbemanten, ferngesteuerten Fahrzeugen und Fluggerten im Hobbybereich vorgese-hen. Horizon Hobby lehnt jede Haftung und Garantieleistung aus-
serhalb der vorgesehen Verwendung ab. GARANTIE REGISTRIERUNG Registrieren Sie bitte Ihr Produkt unter www.spektrumrc.com/registration. DE Spritzwassergeschtzte Komponente Ihr neuer Horizon Hobby Empfnger ist mit einer speziellen Beschichtung auf der Elektronik ausgestattet die den Einsatz in feuchteren Umgebungen ermglicht. Die Beschichtung bietet dabei einen leichten Schutz gegen kleine Mengen Spritzwassertropfen. Tauchen Sie dieses Produkt NIEMALS unter Wasser. Dieses knnte zu Beschdigungen fhren und einen Funktionsverlust zur Folge haben. Gieen Sie NIEMALS Wasser auf das Produkt oder lassen Wasser in direkten Kontakt zu dem Produkt kommen. Betreiben Sie das Produkt NIEMALS in starken Regen oder Schnee. Lassen Sie das Produkt niemals in Kontakt mit Salzwasser (Meerwas-
ser oder salzbedeckte Straen) oder verunreinigtem Wasser kommen. Im Fall von Wasserkontakt oder Verschmutzung reinigen oder trocknen Sie den Empfnger unverzglich mit einem weichen Tuch und lassen ihn vor dem nchsten Gebrauch vollstndig trocknen. HINWEIS: Verwenden Sie niemals einen Hochdruckreiniger um ihr Fahrzeug zu reinigen. HINWEIS: Stellen Sie sicher das andere Komponenten in ihrem Fahrzeug wasserdicht oder wassergeschtzt sind, bevor Sie in nasser Umgebung fahren. SR4000T/SR6000T Telemetrie Empfnger Der Spektrum SR4000/SR6000T Telemetrie Empfnger ist kompatibel zu allen Spektrum DSMR Surface Empfngern. Die Telemetriefunktion erfordert eine Telemetriefhige Fernsteuerung. Spezifikationen Typ: DSMR mit eingebauter Telemetrie Abmessungen: (LxWxH): 37.5 x 27.7 x 15.7mm Antennenlnge: 210mm Kanle: 4 (SR4000T): 6 (SR6000T) Gewicht: 9.2 g Band: 2.4GHz Betriebsspannung: 3.59.6V A: Sensoranschluss Spannung B: Sensoranschluss Temperatur C: Binde Button D: Antenne E: RPM Drehzahlsensoranschluss F: XBus Anschluss G: Servoanschlsse-
Binden/Akku Lenkung Gas Aux1-Aux4
(SR4000T: Aux1, Aux2) A B C D G E F DE Empfngereinbau und Setup Montieren Sie den Empfnger mit doppelseitigen Schaumklebeband. Dieses Klebeband sichert den Empfnger und schtzt ihn vor Vibrationen. Die Antenne sollte nach oben zeigend montiert werden. Je hher die Antenne ist, desto besser ist die Empfangsleistung. Hinweis: Krzen oder modifizieren sich nicht die Antenne. Stromversorgung des Empfngers mit einem Empfngerpack Empfnger Gasservo Lenkservo Akku Stromversorgung des Empfngers mit einem Regler Akku Zum Motor Empfnger Elektronischer Fahrtenregler Lenkservo failsafe Die Failsafe-Positionen werden whrend des Bindungsprozess eingestellt. Fr den unwahrscheinlichen Fall, dass die Funkverbindung whrend des Betriebs abreit, fhrt der Empfnger die Servos in ihre vorprogrammierten Failsafe-
Positionen (in der Regel volle Bremse und Lenkung geradeaus). Wird der Emp-
fnger vor dem Sender eingeschaltet, wechselt er in die Failsafe- Betriebsart und fhrt die Servos an ihre vordefinierten Failsafe- Positionen. Wird dann der Sender eingeschaltet, haben Sie wieder volle Kontrolle ber das Modell. WICHTIG: Die Failsafefunktion wird nur bei Signalverlust aktiv. Sie wird NICHT aktiv wenn die Spannung des Empfngerakkus unter die zulssige Grenze sinkt oder der Akku ausfllt. DE Binden des Empfngers an den Sender Fr den Betrieb mu der Empfnger an den Sender gebunden werden. Binden ist der Prozess der Programmierung des Empfngers mit dem eindeutigen Signal eines spezifischen Senders (GUID) ist der Empfnger an den Sender gebunden wird nur er auf die Signale des Senders reagieren. Binden 1. Halten Sie den Bindenbutton gedrckt whrend Sie den Empfnger einschalten. Die orange LED beginnt zu blinken und zeigt damit an, dass sich der Empfnger im Bindemode befindet. Tipp: Sie knnen ebenfalls einen Bindestecker dem BIND/BATT Port des Empfngers verwenden. 2. Stellen Sie den Gaskanal in die gewnschte Failsafeposition und bringen den Sender in den Bindemode. Halten Sie die Failsafepositionen bis der Bindevorgang durchgefhrt ist. 3. Der Bindevorgang ist durchgefhrt wenn die orange LED auf dem Empfn-
ger leuchtet. ACHTUNG: Ist der Bindevorgang durchgefhrt sind Gas und Lenkung aktiv. Halten Sie die Hnde und andere lose Objekt weg von drehenden Teilen. Sie mssen den Sender und Empfnger neu binden wenn:
Sie die Servolaufrichtung nach dem Binden gendert haben. Sie einen Empfnger mit anderem Modellspeicher verwenden. Sie einen Empfnger mit DSMR Sender verwenden und die Pulsrate ndern. AUX Kanle Sie knnen die AUX Kanle als Servokanle oder zur Stromversorgung eines Transponders verwenden. Ist eine Pulsrate von 5.5ms gewhlt sind nur die zwei Kanle Lenkung und Gas aktiv. Die Auxkanle knnen zur Stromversorgung eines Transponders oder Beleuchtung verwendet werden. Wurde eine andere Pulsrate als 5.5ms gewhlt arbeiten die Aux Kanle als zustzliche Servokanle. IMPoRTANT: Wenn Sie den Empfnger mit einem DSMR Sender verwenden, mssen Sie nach nderung der Pulsrate neu binden. HINWEIS: Die DX4R Pro oder DX6R erfordern eine 5.5ms Pulsrate. DE Telemtrie Der Spektrum SR4000T/SR6000T Telemetrieempfnger ist mit vier Telemetrieanschlssen ausgestattet die kompatibel zu Telemetriefhigen Spektrum Fernsteuerungen sind. Die Telemetrieanschlsse sind:
Spannung Temperatur RPM (Drehzahl) XBus Anschluss (zum Anschluss von zustzlichen Telemetriesensoren) Im Lieferumfang des SR4000T/SR5000T Telemetrieempfngers ist ein Span-
nungs- und Temperatursensor enthalten. Spannungssensor Schlieen Sie den Spannungssensor an den VOLT Anschluss des SR4000T/SR6000T an. Verbinden Sie das schwarze ( - Negativ) offene Ende mit der Stromquelle. Normalerweise geschieht das mit dem Anlten an Akkuanschluss. Temperatursensor Schlieen Sie den Temperatursensor (SPMA9571) an den TEMP Anschluss des SR4000T/SR6000T an. Fhren Sie das Kabel um den Zylinderkopf des Verbrennungsmotors und sichern es in den Khlrippen mit den Plastikschlauchstckchen. Je nach Montageposition kann die bermittelte Temperatur variieren. Experimentieren Sie fr die besten Ergebnisse mit verschiedenen Positionen auf dem Zylinderkopf. Fhren Sie das Kabel um den Akkupack oder Elektromotor und sichern ihn mit Klebeband. Fr weitere Informationen ber die Montage von Spektrum Telementriesen-
soren besuchen Sie bitte http://www.spektrumrc.com 2,4GHz fehlersuchanleitung Problem Das System will sich nicht verbinden Mgliche Ursache Sender und Empfnger sind zu nah zusammen Metallische Objekte in der Nhe Der Empfnger ist an einen anderen Modellspeicher gebunden Der Bindevorgang wurde bei dem Sender aktiviert, der Empfnger ist nicht mehr gebunden Prfen Sie die Antenne auf Beschdigung Der Empfnger geht nach kurzer Distanz in den Failsafemode Der Empfnger reagiert nicht mehr Empfngerakkuspannung zu niedrig Ist die Akkuspannung zu niedrig und unter zeitweise unter 3,5 Volt fllt, fhrt diese zu Empfangsunterbre-
chung und Neuverbindung Lose oder beschdigte Kabel/Verbinder zwischen Akku und Empfnger DE lsung Bewegen Sie den Sender 2,5 -
3 Meter vom Empfnger weg Entfernen Sie sich von den metallische Objekten Whlen Sie den richtigen Modellspeicher Binden Sie den Sender und Empfnger Die Antenne mu sich im Antennenrhrchen und berhalb des Fahrzeuges befinden Ersetzen Sie den Empfn-
ger oder kontaktieren den technischen Service von Horizon Hobby Laden Sie den Empfnger oder Fahrzeugakku. Spektrumempfnger bentigen mindestens 3,5 Volt Betriebsspannung berprfen Sie die Kabel und Verbinder zwischen Akku und Empfnger. Reparieren oder ersetzen Sie Kabel oder Verbinder DE Garantie und Service Informationen Garantiezeitraum Exklusive Garantie Horizon Hobby LLC (Horizon) garantiert, dass das gekaufte Produkt frei von Material- und Montagefehlern ist. Der Garantiezeitraum entspricht den gesetzlichen Bestimmung des Landes, in dem das Produkt erworben wurde. In Deutschland betrgt der Garantiezeitraum 6 Monate und der Gewhrleistungszeitraum 18 Monate nach dem Garantiezeitraum. Einschrnkungen der Garantie
(a) Die Garantie wird nur dem Erstkufer (Kufer) gewhrt und kann nicht bertragen werden. Der Anspruch des Kufers besteht in der Reparatur oder dem Tausch im Rahmen dieser Garantie. Die Garantie erstreckt sich ausschlielich auf Produkte, die bei einem autorisierten Horizon Hndler erworben wurden. Verkufe an dritte werden von dieser Garantie nicht gedeckt. Garantieansprche werden nur angenommen, wenn ein gltiger Kaufnachweis erbracht wird. Horizon behlt sich das Recht vor, diese Garantiebestimmungen ohne Ankndigung zu ndern oder modifizieren und widerruft dann bestehende Garantiebestimmungen.
(b) Horizon bernimmt keine Garantie fr die Verkaufbarkeit des Produktes, die Fhigkeiten und die Fitness des Verbrauchers fr einen bestimmten Ein-
satzzweck des Produktes. Der Kufer allein ist dafr verantwortlich, zu prfen, ob das Produkt seinen Fhigkeiten und dem vorgesehenen Einsatzzweck entspricht.
(c) Ansprche des Kufers Es liegt ausschlielich im Ermessen von Horizon, ob das Produkt, bei dem ein Garantiefall festgestellt wurde, repariert oder ausgetauscht wird. Dies sind die exklusiven Ansprche des Kufers, wenn ein Defekt festgestellt wird. Horizon behlt sich vor, alle eingesetzten Komponenten zu prfen, die in den Garantiefall einbezogen werden knnen. Die Entscheidung zur Reparatur oder zum Austausch liegt nur bei Horizon. Die Garantie schliet kosmetische Defekte oder Defekte, hervorgerufen durch hhere Gewalt, falsche Behandlung des Produktes, falscher Einsatz des Produktes, kommerziellen Einsatz oder Modifikationen irgendwelcher Art aus. Die Garantie schliet Schden, die durch falschen Einbau, falsche Hand-
habung, Unflle, Betrieb, Service oder Reparaturversuche, die nicht von Horizon ausgefhrt wurden aus. Rcksendungen durch den Kufer direkt an Horizon oder eine seiner Landesvertretung bedrfen der Schriftform. Schadensbeschrnkung Horizon ist nicht fr direkte oder indirekte Folgeschden, Einkommensausflle oder kommerzielle Verluste, die in irgendeinem Zusammenhang mit dem Produkt stehen verantwortlich, unabhngig ab ein Anspruch im Zusam-
menhang mit einem Vertrag, der Garantie oder der Gewhrleistung erhoben werden. Horizon wird darber hinaus keine Ansprche aus einem Garantiefall akzeptieren, die ber den individuellen Wert des Produktes hinaus gehen. Horizon hat keinen Einfluss auf den Einbau, die Verwendung oder die Wartung des Produktes oder etwaiger Produktkombinationen, die vom Kufer gewhlt DE werden. Horizon bernimmt keine Garantie und akzeptiert keine Ansprche fr in der folge auftretende Verletzungen oder Beschdigungen. Mit der Verwend-
ung und dem Einbau des Produktes akzeptiert der Kufer alle aufgefhrten Garantiebestimmungen ohne Einschrnkungen und Vorbehalte. Wenn Sie als Kufer nicht bereit sind, diese Bestimmungen im Zusammenhang mit der Benutzung des Produktes zu akzeptieren, werden Sie gebeten, dass Produkt in unbenutztem Zustand in der Originalverpackung vollstndig bei dem Verkufer zurckzugeben. Sicherheitshinweise Dieses ist ein hochwertiges Hobby Produkt und kein Spielzeug. Es muss mit Vorsicht und Umsicht eingesetzt werden und erfordert einige mechanische wie auch mentale Fhigkeiten. Ein Versagen, das Produkt sicher und umsichtig zu betreiben kann zu Verletzungen von Lebewesen und Sachbeschdigungen erheblichen Ausmaes fhren. Dieses Produkt ist nicht fr den Gebrauch durch Kinder ohne die Aufsicht eines Erziehungsberechtigten vorgesehen. Die Anleitung enthlt Sicherheitshinweise und Vorschriften sowie Hinweise fr die Wartung und den Betrieb des Produktes. Es ist unabdingbar, diese Hinweise vor der ersten Inbetriebnahme zu lesen und zu verstehen. Nur so kann der falsche Umgang verhindert und Unflle mit Verletzungen und Beschdigungen vermieden werden. fragen, Hilfe und Reparaturen Ihr lokaler Fachhndler und die Verkaufstelle knnen eine Garantiebeurteilung ohne Rcksprache mit Horizon nicht durchfhren. Dies gilt auch fr Garan-
tiereparaturen. Deshalb kontaktieren Sie in einem solchen Fall den Hndler, der sich mit Horizon kurz schlieen wird, um eine sachgerechte Entscheidung zu fllen, die Ihnen schnellst mglich hilft. Wartung und Reparatur Muss Ihr Produkt gewartet oder repariert werden, wenden Sie sich entweder an Ihren Fachhndler oder direkt an Horizon. Rcksendungen/Reparaturen werden nur mit einer von Horizon vergebenen RMA Nummer bearbeitet. Diese Nummer erhalten Sie oder ihr Fachhndler vom technischen Service. Mehr Informationen dazu erhalten Sie im Servicepor-
tal unter www. Horizonhobby.de oder telefonisch bei dem technischen Service von Horizon. Packen Sie das Produkt sorgfltig ein. Beachten Sie, dass der Originalkarton in der Regel nicht ausreicht, um beim Versand nicht beschdigt zu werden. Verwenden Sie einen Paketdienstleister mit einer Tracking Funktion und Ver-
sicherung, da Horizon bis zur Annahme keine Verantwortung fr den Versand des Produktes bernimmt. Bitte legen Sie dem Produkt einen Kaufbeleg bei, sowie eine ausfhrliche Fehlerbeschreibung und eine Liste aller eingesendeten Einzelkomponenten. Weiterhin bentigen wir die vollstndige Adresse, eine Telefonnummer fr Rckfragen, sowie eine Email Adresse. Garantie und Reparaturen Garantieanfragen werden nur bearbeitet, wenn ein Originalkaufbeleg von einem autorisierten Fachhndler beiliegt, aus dem der Kufer und das Kaufdatum hervorgeht. Sollte sich ein Garantiefall besttigen wird das Produkt repariert oder ersetzt. Diese Entscheidung obliegt einzig Horizon Hobby. 5-14-2015 DE Garantie und Service Kontaktinformationen land des Kauf Horizon Hobby Adresse Deutschland Horizon Technischer Service Christian-Junge-Strae 1 25337 Elmshorn Germany Telefon/E-mail Adresse
+49 (0) 4121 2655 100 service@horizonhobby.de Rechtliche infoRmationen fR die euRopische union Horizon LLC erklrt hiermit, dass dieses Produkt konform zu den essentiellen Anforderungen der R&TTE Direktive ist. Eine Kopie der Konformittserklrung ist online unter folgender Adresse verfgbar:
http://www.horizonhobby.com/content/support-render-compliance. Entsorgung in der Europischen Union Dieses Produkt darf nicht ber den Hausmll entsorgt werden. Es ist die Verantwortung des Benutzers, dass Produkt an einer registrierten Sammelstelle fr Elektroschrott abzugeben diese Verfahren stellt sicher, dass die Umwelt geschont wird und natrliche Ressourcen nicht ber die Gebhr beansprucht werden. Dadurch wird das Wohlergehen der menschlichen Gemein-
schaft geschtzt. Fr weitere Informationen, wo der Elektromll entsorgt werden kann, knnen Sie Ihr Stadtbro oder Ihren lokalen Entsorger kontaktieren. FR REMARQUE La totalit des instructions, garanties et autres documents est sujette modification la seule discrtion dHorizon Hobby, LLC. Pour obtenir la documentation jour, rendez-vous sur le site www.horizonhobby.com et cliquez sur longlet de support de ce produit. Signification de certains termes spcifiques Les termes suivants sont utiliss dans lensemble du manuel pour indiquer diffrents niveaux de danger lors de lutilisation de ce produit:
REMARQUE: procdures qui, si elles ne sont pas suivies correctement, peuvent entraner des dgts matriels ET potentiellement un risque faible de blessures. ATTENTION: procdures qui, si elles ne sont pas suivies correctement, peuvent entraner des dgts matriels ET des blessures graves. AVERTISSEMENT: procdures qui, si elles ne sont pas suivies correctement, peuvent entraner des dgts matriels et des blessures graves OU engendrer une probabilit leve de blessure superficielle. 14 ans et plus. Ceci nest pas un jouet. AVERTISSEMENT: lisez la TOTALIT du manuel dutilisation afin de vous familiariser avec les caractristiques du produit avant de le faire fonctionner. Une utilisation incorrecte du produit peut entraner lendommagement du produit lui-mme, ainsi que des risques de dgts matriels, voire de blessures graves. Ceci est un produit de loisirs sophistiqu. Il doit tre manipul avec prudence et bon sens et requiert des aptitudes de base en mcanique. Toute utilisation de ce produit ne respectant pas les principes de scurit et de responsabilit peut entraner des dgts matriels, endommager le produit et provoquer des blessures. Ce produit nest pas destin tre utilis par des enfants sans la surveillance directe dun adulte. Nessayez pas de dmonter le produit, de lutiliser avec des composants incompatibles ou den amliorer les performances sans laccord dHorizon Hobby, LLC. Ce manuel comporte des instructions relatives la scurit, au fonctionnement et lentretien. Il est capital de lire et de respecter toutes les instructions et tous les avertisse-
ments du manuel avant lassemblage, le rglage ou lutilisation afin de manipuler correctement lappareil et dviter tout dgt matriel ainsi que toute blessure grave. ATTENTION AUx CONTREFAONS Nous vous remercions davoir achet un vritable produit Spektrum. Toujours acheter chez un revendeur officiel Horizon hobby pour tre sur davoir des produits authentiques. Horizon Hobby dcline toute garantie et responsabilit concernant les produits de contrefaon ou les produits se disant compatibles DSM ou Spektrum. REMARQUE: Ce produit est uniquement rserv une utilisation avec des modles rduits radiocommands de loisir. Horizon Hobby se dgage de toute responsabilit et garantie si le produit est utilis dautre manire que celle cite prcdemment. GARANTIE ET ENREGISTREMENT Veuillez visiter www.spektrumrc.com/registration pour enregistrer en ligne votre produit. FR Composant rsistant leau Votre nouveau rcepteur Horizon Hobby, a une platine lectronique recouverte dune rsine spciale qui offre une protection contre les claboussures deau. NE PAS immerger ce produit. Si cela se produit, il risque dtre endom-
mag ou de perdre sa fonction. NE PAS renverser deau sur le produit, ni laisser de leau rentrer en contact de manire excessive avec le produit. NE PAS utiliser ce produit sous une forte pluie ou sous la neige. NE JAMAIS exposer ce produit de leau sale (eau de mer ou route sale), ou de leau contamine ou pollue. Dans le cas dune exposition excessive leau ou de la salet, essuyez im-
mdiatement le rcepteur avec un chiffon doux et laissez-le totalement scher avant la prochaine utilisation. REMARQUE : Nutilisez jamais un nettoyeur haute-pression pour nettoyer le vhicule. REMARQUE: Contrlez que les autres composants de votre vhicule sont rsis-
tants leau ou tanches avant deffectuer une sortie en conditions humides. Rcepteur avec tlmtrie intgre SR4000T/SR6000T Le rcepteur avec tlmtrie intgre SR4000T/SR6000T est compatible avec tous les metteurs Spektrum DSMR. Les fonctions tlmtrie ncessitent lutilisation dun metteur Spektrum compatible tlmtrie. Caractristiques Type: DSMR avec tlmtrie intgre Dimensions (LxlxH): 37,5 x 27,7 x 15,7mm Longueur de lantenne: 210mm Voies: 4 (SR4000T): 6 (SR6000T) Masse: 9,2g Frquence: 2,4GHz Tension dalimentation: 3,5 9,6V A: Port de capteur de tension B: Port de capteur de temprature C: Bouton affectation (Bind) D: Antenne E: Port de capteur de rgime F: Port XBUS G: Ports servos-
A B Affectation/Batterie Direction (Steering) Gaz (Throttle) Aux1 - Aux4
(SR4000T: Aux1, Aux2) C D G E F FR Branchements et installation du rcepteur Installez le rcepteur dans votre vhicule laide de la mousse double-face pour servo. La mousse double-face permettra de maintenir le rcepteur en place et de le protger des vibrations. Installez lantenne en lorientant vers le haut et en lloignant du vhicule. Plus lantenne sera leve, meilleure la rception sera. REMARQUE: Ne coupez ou modifiez pas lantenne. Installation du rcepteur avec pack batterie Rcepteur Servo de gaz Servo de direction Batterie Installation du rcepteur avec ESC Batterie Vers le moteur Contrleur Rcepteur Servo de direction Failsafe (Les positions de scurit intgre) Les positions de scurit intgre (failsafe) sont galement rgles lors de laffectation. Dans lhypothse peu probable dune perte de la liaison radio en cours dutilisation, le rcepteur ramne le servo des gaz sa position prpro-
gramme de failsafe (freinage maximal normalement) et les sorties des autres voies sont dsactives. Si le rcepteur est mis sous tension avant lmetteur, il bascule en mode failsafe et place le servo des gaz dans la position de failsafe prrgle. Une fois que lmetteur est sous tension, les commandes repren-
nent leur fonctionnement normal. IMPORTANT: le Failsafe sactive uniquement en cas de perte du signal de lmetteur. Le failsafe nest PAS activ si la charge de la batterie du rcepteur est faible ou en cas de perte de puissance du rcepteur. FR Affectation du rcepteur lmetteur Laffectation (ou Bind) est le processus consistant renseigner le rcepteur sur le code spcifique de lmetteur, appel identificateur unique global (GUID, Globally Unique Identifier), et mmoriser les valeurs de scurit intgre. Lorsquun rcepteur est affect un metteur/une mmoire de modle, il rpond uniquement cet metteur/cette mmoire de modle spcifique (voir ModelMatch pour plus dinformations). Affectation 1. Pressez et maintenez le bouton Affectation du rcepteur lors de la mise sous tension du rcepteur. La DEL orange clignotera continuellement, indiquant que le rcepteur est en mode affectation. Conseil: Vous pouvez galement utiliser une prise daffectation dans le port BIND/BATT si vous le souhaitez. 2. En plaant la gchette dans la position dsire pour le failsafe
(gnralement au neutre), mettez votre metteur en mode affectation. Maintenez la position de failsafe jusqu la fin du processus daffectation. 3. Le processus daffectation est termin quand la DEL orange du rcepteur sallume fixement. ATTENTION: La voie des gaz et la voie de direction sont actives quand le processus daffectation est termin. Tenez vos mains, cheveux et pendentifs lcart des pices en rotation du vhicule. Vous devez raffecter lmetteur et le rcepteur quand:
Vous inversez la direction dune voie aprs laffectation Vous souhaitez utiliser le rcepteur avec diffrents modles programms dans votre metteur Vous utilisez le rcepteur avec un metteur DSMR et que vous changez son taux de rafrachissement. Voies auxiliaires Les voies auxiliaires peuvent servir pour commander dautres servos ou pour alimenter une puce de comptage. Si le taux de rafrachissement slectionn dans votre metteur est de 5.5ms, seules les voies des gaz et de direction seront oprationnelles. Les voies Aux ne pourront servir qu alimenter une puce de comptage ou des clairages. Si un taux de rafrachissement autre que 5.5ms est slectionn, les voies Aux pourront commander dautres servos. IMPORTANT: Quand vous utilisez le rcepteur avec un metteur DSMR, vous devrez refaire le processus daffectation chaque changement de taux de rafrachissement de lmetteur. REMARQUE: Seules les radios DX4R Pro ou DX6R permettent un taux de rafrachissement de 5,5ms. FR Tlmtrie Le rcepteur Spektrum SR4000T/SR6000T avec tlmtrie intgre est quip de 4 ports tlmtrie intgrs compatibles avec les metteurs Spektrum avec tlmtrie. Les ports tlmtrie comprennent:
Le rcepteur Spektrum SR4000T/SR6000T avec tlmtrie intgre comprend un capteur de tension et un capteur de temprature. Capteur de tension Tension Temprature Rgime (RPM) Port XBus (Connexion supplmentaire de capteurs tlmtrie) Branchez le capteur de tension (SPMA9570) au port VOLT du SR4000T/
SR6000T. Attachez lextrmit dnude du cble au cble ngatif - (Noir) de la source tension. En gnral, on soude le cble la prise batterie. Capteur de temprature Branchez la capteur de temprature (SPMA9571) dans le port TEMP du SR4000T/SR6000T. Enroulez le cble autour de la tte du moteur thermique, en le serrant pour le maintenir en place. Les mesures de temprature seront diffrentes selon la position de montage du capteur sur le moteur. Essayez diffrents montages sur le moteur afin dobtenir les meilleurs rsultats. Enroulez le cble autour de la batterie ou du moteur lectrique et fixez-le avec de ladhsif. Pour obtenir des informations sur linstallation dautres capteurs de tlmtrie Spektrum, visitez la page http://www.spektrumrc.com FR Guide de dpannage 2.4GHz Problme Cause possible Solution Le systme ne se connecte pas Le rcepteur passe en mode failsafe une faible distance de lmetteur Le rcepteur ne rpond pas durant lutilisation Lmetteur et le rcepteur sont trop proches lun de lautre Vous tes proximit dobjets mtalliques Le rcepteur est affect une autre mmoire de lmetteur Lmetteur a t replac en mode affectation et nest plus affect lmetteur Contrlez ltat de lantenne du rcepteur Batterie de rception faible. Si la tension de la batterie est faible, la tension peut momentanment descen-
dre sous 3.5V causant la dconnexion temporaire du rcepteur loignez lmetteur du rcepteur dune distance denviron 2m Dplacez-vous dans une zone comportant moins dobjets mtalliques Assurez-vous que la mmoire slectionne cor-
respond au modle utilis Raffectez votre metteur et votre rcepteur Assurez-vous que lantenne du rcepteur est bien dans un tube au plus haut du vhicule Remplacez le rcepteur ou contactez le service technique Horizon Hobby Rechargez la batterie de rception ou de propulsion du vhicule. Les rcepteurs Spektrum ncessitent une tension minimale de 3.5V Cbles abms ou dbranchs entre la batterie et le rcepteur Contrlez ltat des cbles et remplacez-les sils sont endommags FR Garantie et rparations Dure de la garantie Garantie exclusive - Horizon Hobby, LLC. (Horizon) garantit que le Produit achet
(le Produit ) sera exempt de dfauts matriels et de fabrication sa date dachat par lAcheteur. La dure de garantie correspond aux dispositions lgales du pays dans lequel le produit a t acquis. La dure de garantie est de 6 mois et la dure dobligation de garantie de 18 mois lexpiration de la priode de garantie. Limitations de la garantie
(a) La garantie est donne lacheteur initial ( Acheteur ) et nest pas transfrable. Le recours de lacheteur consiste en la rparation ou en lchange dans le cadre de cette garantie. La garantie sapplique uniquement aux produits achets chez un revendeur Horizon agr. Les ventes faites des tiers ne sont pas couvertes par cette garantie. Les revendications en garantie seront acceptes sur fourniture dune preuve dachat valide uniquement. Horizon se rserve le droit de modifier les dispositions de la prsente garantie sans avis pralable et rvoque alors les dispositions de garantie existantes.
(b) Horizon nendosse aucune garantie quant la vendabilit du produit ou aux capacits et la forme physique de lutilisateur pour une utilisation donne du produit. Il est de la seule responsabilit de lacheteur de vrifier si le produit correspond ses capacits et lutilisation prvue.
(c) Recours de lacheteur Il est de la seule discrtion dHorizon de dterminer si un produit prsentant un cas de garantie sera rpar ou chang. Ce sont l les recours exclusifs de lacheteur lorsquun dfaut est constat. Horizon se rserve la possibilit de vrifier tous les lments utiliss et susceptibles dtre intgrs dans le cas de garantie. La dcision de rparer ou de remplacer le produit est du seul ressort dHorizon. La garantie exclut les dfauts esthtiques ou les dfauts provoqus par des cas de force majeure, une manipulation incorrecte du produit, une utilisation incorrecte ou commerciale de ce dernier ou encore des modifications de quelque nature quelles soient. La garantie ne couvre pas les dgts rsultant dun montage ou dune manipulation errons, daccidents ou encore du fonctionnement ainsi que des tentatives dentretien ou de rparation non effectues par Horizon. Les retours effectus par le fait de lacheteur directement Horizon ou lune de ses reprsentations nationales requirent une confirmation crite. Limitation des dgts Horizon ne saurait tre tenu pour responsable de dommages consquents directs ou indirects, de pertes de revenus ou de pertes commerciales, lis de quelque manire que ce soit au produit et ce, indpendamment du fait quun recours puisse tre formul en relation avec un contrat, la garantie ou lobligation de garantie. Par ailleurs, Horizon nacceptera pas de recours issus dun cas de garantie lorsque ces recours dpassent la valeur unitaire du produit. Horizon nexerce aucune influence sur le montage, lutilisation ou la maintenance du produit ou sur dventuelles combinaisons de produits choisies par lacheteur. Horizon ne prend en compte aucune garantie et naccepte aucun recours pour les blessures ou les dommages pouvant en rsulter. En utilisant et en montant FR le produit, lacheteur accepte sans restriction ni rserve toutes les dispositions relatives la garantie figurant dans le prsent document. Si vous ntes pas prt, en tant quacheteur, accepter ces dispositions en relation avec lutilisation du produit, nous vous demandons de restituer au vendeur le produit complet, non utilis et dans son emballage dorigine. Indications relatives la scurit Ceci est un produit de loisirs perfectionn et non un jouet. Il doit tre utilis avec prcaution et bon sens et ncessite quelques aptitudes mcaniques ainsi que mentales. Lincapacit utiliser le produit de manire sre et raisonnable peut provoquer des blessures et des dgts matriels consquents. Ce produit nest pas destin tre utilis par des enfants sans la surveillance par un tuteur. La notice dutilisation contient des indications relatives la scurit ainsi que des indications concernant la maintenance et le fonctionnement du produit. Il est absolument indispensable de lire et de comprendre ces indications avant la premire mise en service. Cest uniquement ainsi quil sera possible dviter une manipulation errone et des accidents entranant des blessures et des dgts. Questions, assistance et rparations Votre revendeur spcialis local et le point de vente ne peuvent effectuer une estimation dligibilit lapplication de la garantie sans avoir consult Horizon. Cela vaut galement pour les rparations sous garantie. Vous voudrez bien, dans un tel cas, contacter le revendeur qui conviendra avec Horizon dune dcision approprie, destine vous aider le plus rapidement possible. Maintenance et rparation Si votre produit doit faire lobjet dune maintenance ou dune rparation, adressez-vous soit votre revendeur spcialis, soit directement Horizon. Emballez le produit soigneusement. Veuillez noter que le carton demballage dorigine ne suffit pas, en rgle gnrale, protger le produit des dgts pouvant survenir pendant le transport. Faites appel un service de messagerie proposant une fonction de suivi et une assurance, puisque Horizon ne prend aucune responsabilit pour lexpdition du produit jusqu sa rception accepte. Veuillez joindre une preuve dachat, une description dtaille des dfauts ainsi quune liste de tous les lments distincts envoys. Nous avons de plus besoin dune adresse complte, dun numro de tlphone (pour demander des renseignements) et dune adresse de courriel. Garantie et rparations Les demandes en garantie seront uniquement traites en prsence dune preuve dachat originale manant dun revendeur spcialis agr, sur laquelle figurent le nom de lacheteur ainsi que la date dachat. Si le cas de garantie est confirm, le produit sera rpar Cette dcision relve uniquement de Horizon Hobby. Rparations payantes En cas de rparation payante, nous tablissons un devis que nous transmettons votre revendeur. La rparation sera seulement effectue aprs que nous ayons reu la confirmation du revendeur. Le prix de la rparation devra tre acquitt au revendeur. Pour les rparations payantes, nous facturons au minimum 30 minutes de travail en atelier ainsi que les frais de rexpdition. En labsence dun accord pour la rparation dans un dlai de 90 jours, nous nous rservons la possibilit de dtruire le produit ou de lutiliser autrement. FR ATTENTION: Nous neffectuons de rparations payantes que pour les composants lectroniques et les moteurs. Les rparations touchant la mcanique, en particulier celles des hlicoptres et des voitures radiocommandes, sont extrmement coteuses et doivent par consquent tre effectues par lacheteur lui-mme. Coordonnes de Garantie et rparations 5-14-2015 Pays dachat Horizon Hobby Adresse France Horizon Hobby SAS 11 Rue Georges Charpak 77127 Lieusaint Numro de tlphone/
+33 (0) 1 60 18 34 90 infofrance@horizonhobby. com Information IC Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Informations de conformit pour lUnion europenne Dclaration de conformit de lUnion europenne : Horizon Hobby, LLC dclare par la prsente que ce produit est en conformit avec les exigences essentielles et les autres dispositions dela RTTE Directive. Une copie de la dclaration de conformit europenne est disponible :
http://www.horizonhobby.com/content/support-render-compliance. Instructions relatives llimination des D3E pour les utilisateurs rsidant dans lUnion europenne Ce produit ne doit pas tre limin avec les ordures mnagres. Il est de la responsabilit de lutilisateur de remettre le produit un point de collecte officiel des dchets dquipements lectriques. Cette procdure permet de garantir le respect de lenvironnement et labsence de sollicitation excessive des ressources naturelles. Elle protge de plus le bien-tre de la communaut humaine. Pour plus dinformations quant aux lieux dliminations des dchets dquipements lectriques, vous pouvez contacter votre mairie ou le service local de traitement des ordures mnagres. IT AVVISO Tutte le istruzioni, le garanzie e gli altri documenti pertinenti sono soggetti a cambiamenti a totale discrezione di Horizon Hobby, LLC. Per una documen-
tazione aggiornata sul prodotto, visitare il sito horizonhobby.com e fare clic sulla sezione Support del prodotto. Significato dei termini usati Nella documentazione relativa al prodotto vengono utilizzati i seguenti termini per indicare i vari livelli di pericolo potenziale durante luso del prodotto:
AVVISO: indica procedure che, se non debitamente seguite, possono determinare il rischio di danni alle cose E il rischio minimo o nullo di lesioni alle persone. ATTENZIONE: indica procedure che, se non debitamente seguite, determi-
nano il rischio di danni alle cose E di gravi lesioni alle persone. AVVERTENZA: indica procedure che, se non debitamente seguite, determinano il rischio di danni alle cose, danni collaterali e gravi lesioni alle persone o il rischio elevato di lesioni superficiali alle persone. Almeno 14 anni. Non un giocattolo. AVVERTENZA: Leggere TUTTO il manuale di istruzioni e familiariz-
zare con le caratteristiche del prodotto prima di farlo funzionare. Un uso improprio del prodotto pu causare danni al prodotto stesso e alle altre cose e gravi lesioni alle persone. Questo un prodotto sofisticato per appassionati di modellismo. Deve essere azionato in maniera attenta e responsabile e richiede alcune cono-
scenze basilari di meccanica. Luso improprio o irresponsabile di questo prodotto pu causare lesioni alle persone e danni al prodotto stesso o alle altre cose. Questo prodotto non deve essere utilizzato dai bambini senza la diretta supervisione di un adulto. Non tentare di smontare, utilizzare com-
ponenti incompatibili o modificare il prodotto in nessun caso senza previa approvazione di Horizon Hobby, LLC. Questo manuale contiene le istruzioni per la sicurezza, luso e la manutenzione del prodotto. fondamentale leggere e seguire tutte le istruzioni e le avvertenze del manuale prima di montare, impostare o utilizzare il prodotto, al fine di utilizzarlo correttamente e di evitare di causare danni alle cose o gravi lesioni alle persone. ATTENZIONE PER I PRODOTTI CONTRAFFATTI: Raccomandiamo di acquistare sempre da rivenditori autorizzati Horizon per essere sicuri di avere un prodotto originale di alta qualit. Horizon rifiuta qualsiasi tipo di assistenza in garanzia di prodotti contraffatti o che dichiarano compatibilit con DSM o Spektrum. AVVISO: Questo prodotto rivolto esclusivamente a veicoli ed aerei di tipo hobbistico senza pilota a bordo e controllati a distanza. Al di fuori di questo utilizzo, Horizon Hobby declina ogni responsabilit e non riconosce interventi in garanzia. REgISTRAZIONE DEllA gARANZIA Visitare oggi stesso il sito www.spektrumrc.com/registration per registrare il prodotto. IT Componente resistente allacqua Il vostro nuovo ricevitore Horizon Hobby, sulla parte elettronica ha uno speciale rivestimento resistente a condizioni di umidit medie o forti. Questo rivesti-
mento protettivo pu offrire una protezione leggera dalle goccioline di acqua. NON immergere in acqua questo prodotto per qualsiasi periodo di tem-
po. In caso contrario si potrebbe danneggiare o perdere delle funzioni NON versare acqua allinterno di questo prodotto o permettere che spruzzi di acqua entrino in contatto con esso NON usare questo prodotto in caso di forte pioggia o neve NON esporre questo prodotto al contatto con acqua salata (acqua marina o acqua proveniente da una strada su cui sia stato sparso del sale), acqua contaminata o inquinata Nel caso di eccessiva esposizione allacqua o a detriti, asciugare immediata-
mente il ricevitore con un panno morbido, e lasciare che si asciughi prima di usarlo di nuovo AVVISO: Non usare mai acqua sotto pressione per pulire il vostro veicolo. AVVISO: Questo componente impermeabile per poterlo utilizzare in ambienti bagnati. Controllate che siano resistenti allacqua anche gli altri componenti del vostro veicolo prima di utilizzarlo in condizioni di bagnato. Ricevente con Telemetria SR4000T/
SR6000T Questa ricevente Spektrum compatibile con le trasmittenti car Spektrum DSMR. Le funzioni di telemetria richiedono una trasmittente Spektrum abilitata. Caratteristiche Typo: DSMR con telemetria interna Dimensioni (LxWxH): 37,5 x 27,7 x 15,7mm Lunghezza antenna: 8,27 in 210mm Canali: 4 (SR4000T): 6 (SR6000T) Peso: 9,2 g Banda: 2,4GHz Tensione di utilizzo: 3,59,6V A: Presa sensore tensione B: Presa sensore temperatura C: Tasto connessione (bind) D: Antenna E: Presa sensore RPM F: Presa XBUS G: Prese per servocomandi-
Batteria/Bind Sterzo Motore Aux1-Aux4
(SR4000T: Aux1, Aux2) A B C D G E F IT Installazione ricevente e impostazioni Installare la ricevente sul proprio veicolo usando del nastro biadesivo in gomma piuma per servi. Questo nastro tiene ferma la ricevente e nello stesso tempo la isola dalle vibrazioni. Montare lantenna in una posizione alta e distanziata dal veicolo. Pi alta e migliore sar il segnale ricevuto. AVVISO: non tagliare o modificare lantenna. Installazione con regolatore elettronico Ricevitore Servo motore Servo sterzo Batteria Installazione con pacco batteria Batteria Al motore Ricevitore Regolatore elettronico di velocit Servo sterzo Failsafe La posizione di failsafe del motore viene impostata durante la connessione
(binding). Nel caso improbabile che si perda il collegamento radio durante luso, il ricevitore mander il servo del motore nella posizione di failsafe pre-
programmata normalmente al centro o con i freni al massimo e lascer i servi degli altri canali nella loro posizione attuale. Se il ricevitore fosse acceso prima del trasmettitore, entrer nel modo failsafe portando il servo del motore nella sua posizione pre-programmata. Accendendo il trasmettitore si ristabilisce il controllo normale. IMPORTANTE: Il failsafe si attiva solo nel caso che venga perso il segnale del suo trasmettitore. Non si attiver se la batteria del ricevitore scende sotto alla sua tensione minima o se il ricevitore non pi alimentato. IT Connessione (Binding) del ricevitore al trasmettitore Questa procedura programma il ricevitore a riconoscere il numero unico GUID del suo trasmettitore. Una volta connesso, il ricevitore risponder solo a quel trasmettitore. Collegamento 1. Tenere premuto il tasto Bind sulla ricevente mentre la si accende. Il LED arancio lampegger continuamente, indicando che la ricevente in modalit connessione (bind). Consiglio: volendo si pu usare un Bind Plug inserito nella presa BIND/BATT. 2. Con il motore nella posizione di failsafe (normalmente il punto neutro), mettere il trasmettitore in modalit bind. Bisogna mantenere la posizione di failsafe finch la procedura di connessione (binding) non terminata. 3. La procedura termina quando il LED arancio sul ricevitore resta acceso fisso. ATTENZIONE: quando termina la procedura di connessione, i canali di motore e sterzo sono attivi. Tenere le mani e gli oggetti liberi lontano dalle parti rotanti del veicolo. Bisogna rifare la connessione fra trasmettitore e ricevitore se:
si inverte la corsa dei servi con il Reverse. si cambia modello sulla memoria del trasmettitore. si usa il ricevitore con un trasmettitore DSMR e si cambia il frame rate sul trasmettitore. Canali ausiliari I canali Aux possono operare come canali aggiuntivi per servi, o come alimentatori per il proprio transponder. Se sulla trasmittente si selezionato un Frame Rate di 5,5ms, sono operativi solo due canali, Sterzo e Motore. I canali ausiliari si possono usare per alimentare un transponder o delle luci. Se si selezionato un Frame Rate diverso da 5,5ms, i canali ausiliari potranno operare con servi aggiuntivi. IMPORTANTE: quando si usa questo ricevitore con un trasmettitore DSMR, bisogna rifare la connessione tutte le volte che si cambia frame rate sul trasmettitore. AVVISO: per il Frame Rate di 5,5ms necessario avere una DX4R Pro o DX6R. IT Telemetria La ricevente Spektrum SR4000T/SR6000T ha 4 prese integrate per la teleme-
tria compatibile con le trasmittenti Spektrum abilitate. Queste prese sono:
Questa ricevente inoltre viene fornita con i sensori per la tensione e la tem-
peratura compresi. Sensore per la tensione Tensione Temperatura RPM Porta XBUS (collega sensori per la telemetria addizionali) Collegare il sensore di tensione (SPMA9570) alla presa VOLT sullSR4000T/SR6000T. Collegare il filo con lestremit spellata al cavo del Negativo (Nero -) della sorgente di alimentazione. Normalmente si salda questo filo al connettore della batteria. Sensore per la temperatura Collegare il sensore di temperatura (SPMA9571) alla presa TEMP sullSR4000T/SR6000T. Avvolgere il filo intorno alla testa di un motore a scoppio, utilizzando il manicotto in plastica per fissarlo. Si avranno letture di temperatura diverse a seconda della posizione di montaggio sulla testa del motore a scoppio. Si dovranno fare delle prove per stabilire la posizione migliore in base ai risultati voluti. Avvolgere il filo del sensore intorno alla batteria o al motore elettrico fissandolo con del nastro adesivo. Per avere ulteriori informazioni sullinstallazione di questi sensori si veda su http://www.spektrumrc.com. IT guida alla Risoluzione dei Problemi 2.4gHz Problema Il sistema non si collega Possibile Il trasmettitore e il ricevi-
tore sono troppo vicini La ricevente va in modalit Failsafe a poca distanza dalla trasmittente La rice-
vente smette di rispondere durante lutilizzo Ci sono oggetti metallici vicini Il ricevitore connesso alla memoria di un modello diverso Il trasmettitore stato posto in modalit Bind e non pi connesso al ricevitore Verificare che lantenna del ricevitore non sia dan-
neggiata Tensione della batteria ricevente troppo bassa. Se la tensione della batteria fosse bassa, potrebbe scendere per brevi momenti sotto a 3,5V causando uno spegnimento improvviso del ricevitore e una successiva ricon-
nessione I cavi o i connettori tra batteria e ricevente sono danneggiati o lenti Soluzione Allontanare il trasmet-
titore a circa 3 metri dal ricevitore Spostarsi in unarea con meno metallo Accertarsi che sul trasmet-
titore sia attiva la memoria giusta Ripetere la procedura di connessione fra trasmet-
titore e ricevitore Accertarsi che lantenna del ricevitore sia inserita nel suo tubetto e posta nella parte alta del veicolo Sostituire il ricevitore o contattare il servizio assistenza Horizon Caricare la batteria del ricevitore o del veicolo. I ricevitori Spektrum ri-
chiedono almeno 3,5V per funzionare Controllare i cavi e le connessioni tra batteria e ricevente. Riparare o sosti-
tuire i cavi e/o i connettori IT Periodo di garanzia garanzia esclusiva Horizon Hobby, LLC, (Horizon) garantisce che i prodotti acquistati (il Prodotto) sono privi di difetti relativi ai materiali e di eventuali errori di montaggio. Il periodo di garanzia conforme alle disposizioni legali del paese nel quale il prodotto stato acquistato. Tale periodo di garanzia ammonta a 6 mesi e si estende ad altri 18 mesi dopo tale termine. limiti della garanzia
(a) La garanzia limitata allacquirente originale (Acquirente) e non cedibile a terzi. Lacquirente ha il diritto a far riparare o a far sostituire la merce durante il periodo di questa garanzia. La garanzia copre solo quei prodotti acquistati presso un rivenditore autorizzato Horizon. Altre transazioni di terze parti non sono coperte da questa garanzia. La prova di acquisto necessaria per far valere il diritto di garanzia. Inoltre, Horizon si riserva il diritto di cambiare o modificare i termini di questa garanzia senza alcun preavviso e di escludere tutte le altre garanzie gi esistenti.
(b) Horizon non si assume alcuna garanzia per la disponibilit del prodotto, per ladeguatezza o lidoneit del prodotto a particolari previsti dallutente. sola responsabilit dellacquirente il fatto di verificare se il prodotto adatto agli scopi da lui previsti.
(c) Richiesta dellacquirente spetta soltanto a Horizon, a propria discrezione riparare o sostituire qualsiasi prodotto considerato difettoso e che rientra nei termini di garanzia. queste sono le uniche rivalse a cui lacquirente si pu ap-
pellare, se un prodotto difettoso. Horizon si riserva il diritto di controllare qualsiasi componente utilizzato che viene coinvolto nella rivalsa di garanzia. Le decisioni relative alla sostituzione o alla riparazione avvengono solo in base alla discrezione di Horizon. Questa garanzia non copre dei danni superficiali o danni per cause di forza maggiore, uso errato del prodotto, negligenza, uso ai fini commerciali, o una qualsiasi modifica a qualsiasi parte del prodotto. Questa garanzia non copre danni dovuti ad una installazione errata, ad un funzionamento errato, ad una manutenzione o un tentativo di riparazione non idonei a cura di soggetti diversi da Horizon. La restituzione del prodotto a cura dellacquirente, o da un suo rappresentante, deve essere approvata per iscritto dalla Horizon. limiti di danno Horizon non si riterr responsabile per danni speciali, diretti, indiretti o conse-
quenziali; perdita di profitto o di produzione; perdita commerciale connessa al prodotto, indipendentemente dal fatto che la richiesta si basa su un contratto o sulla garanzia. Inoltre la responsabilit di Horizon non supera mai in nessun caso il prezzo di acquisto del prodotto per il quale si chiede la responsabilit. Horizon non ha alcun controllo sul montaggio, sullutilizzo o sulla manutenzione del prodotto o di combinazioni di vari prodotti. Quindi Horizon non accetta nessuna responsabilit per danni o lesioni derivanti da tali circostanze. Con lutilizzo e il montaggio del prodotto lutente acconsente a tutte le condizioni, limitazioni e riserve di garanzia citate in questa sede. Qualora lutente non fosse pronto ad assumersi tale responsabilit associata alluso del prodotto, si suggerisce di di restituire il prodotto intatto, mai usato e immediatamente presso il venditore. IT Indicazioni di sicurezza Questo un prodotto sofisticato di hobbistica e non un giocattolo. Esso deve essere manipolato con cautela, con giudizio e richiede delle conoscenze basi-
lari di meccanica e delle facolt mentali di base. Se il prodotto non verr ma-
nipolato in maniera sicura e responsabile potrebbero risultare delle lesioni, dei gravi danni a persone, al prodotto o allambiente circostante. Questo prodotto non concepito per essere usato dai bambini senza una diretta supervisione di un adulto. Il manuale del prodotto contiene le istruzioni di sicurezza, di funzionamento e di manutenzione del prodotto stesso. fondamentale leggere e seguire tutte le istruzioni e le avvertenze nel manuale prima di mettere in funzione il prodotto. Solo cos si eviter un utilizzo errato e di preverranno incidenti, lesioni o danni. Domande, assistenza e riparazioni Il vostro negozio locale e/o luogo di acquisto non possono fornire garanzie di assistenza o riparazione senza previo colloquio con Horizon. Questo vale anche per le riparazioni in garanzia. Quindi in tale casi bisogna interpellare un rivenditore, che si metter in contatto subito con Horizon per prendere una decisione che vi possa aiutare nel pi breve tempo possibile. Manutenzione e riparazione Se il prodotto deve essere ispezionato o riparato, si prega di rivolgersi ad un rivenditore specializzato o direttamente ad Horizon. il prodotto deve es-
sere imballato con cura. Bisogna far notare che i box originali solitamente non sono adatti per effettuare una spedizione senza subire alcun danno. Bisogna effettuare una spedizione via corriere che fornisce una tracciabilit e unassicurazione, in quanto Horizon non si assume alcuna responsabilit in relazione alla spedizione del prodotto. Inserire il prodotto in una busta assieme ad una descrizione dettagliata degli errori e ad una lista di tutti i singoli compo-
nenti spediti. Inoltre abbiasmo bisogno di un indirizzo completo, di un numero di telefono per chiedere ulteriori domande e di un indirizzo e-mail. garanzia a riparazione Le richieste in garanzia verranno elaborate solo se presente una prova dacquisto in originale proveniente da un rivenditore specializzato autorizzato, nella quale ben visibile la data di acquisto. Se la garanzia viene confermata, allora il prodotto verr riparato o sostituito. Questa decisione spetta esclusiva-
mente a Horizon Hobby. Riparazioni a pagamento Se bisogna effettuare una riparazione a pagamento, effettueremo un preventivo che verr inoltrato al vostro rivenditore. La riparazione verr effettuata dopo lautorizzazione da parte del vostro rivenditore. La somma per la riparazione dovr essere pagata al vostro rivenditore. Le riparazioni a pagamento avranno un costo minimo di 30 minuti di lavoro e in fattura includeranno le spese di restituzione. Qualsiasi riparazione non pagata e non richiesta entro 90 giorni verr considerata abbandonata e verr gestita di conseguenza. ATTENZIONE: Le riparazioni a pagamento sono disponibili solo sullelettronica e sui motori. Le riparazioni a livello meccanico, soprattutto per gli elicotteri e le vetture RC sono molto costose e devono essere effettuate autonomamente dallacquirente. 5-14-2015 IT garanzia e Assistenza - Informazioni per i contatti Stato dacquisto Germania Horizon Hobby Horizon Technischer Service Indirizzo Christian-Junge-Strae 1 25337 Elmshorn, Germania Telefono/Indirizzo e-mail
+49 (0) 4121 2655 100 service@horizonhobby.de Informazioni sulla conformit per lUnione Europea Horizon Hobby, LLC con la presente dichiara che il prodotto conforme ai requisiti essenziali e ad altre disposizioni rilevanti del R&TTE direttiva. Una copia della dichiarazione di conformit per lUnione Europea disponibile a: http://www.horizonhobby.com/content/support-render-compliance. Istruzioni del RAEE per lo smaltimento da parte di utenti dellUnione Europea Questo prodotto non deve essere smaltito assieme ai rifiuti domestici. Invece responsabilit dellutente lo smaltimento di tali rifiuti, che devono essere portati in un centro di raccolta designato per il riciclaggio di rifiuti elettronici. Con tale procedimento si aiuter preservare lambiente e le risorse non verranno sprecate. In questo modo si protegger il benessere dellumanit. Per maggiori informazioni sui punti di riciclaggio si prega di contattare il proprio ufficio locale o il servizio di smaltimento rifiuti. IT 2016 Horizon Hobby, llC. DSM, DSMR and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, llC. The Spektrum trademark is used with permission of Bachmann Industries, Inc. All other trademarks, service marks and logos are property of their respective owners. Patents pending. Created 05/16 52170
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-06-10 | 2404 ~ 2476 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2016-06-10
|
||||
1 | Applicant's complete, legal business name |
Horizon Hobby, LLC
|
||||
1 | FCC Registration Number (FRN) |
0006301931
|
||||
1 | Physical Address |
2904 Research Rd.
|
||||
1 |
Champaign, Illinois 61821
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@micomlabs.com
|
||||
1 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BRW
|
||||
1 | Equipment Product Code |
SPMSR4000T
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
C******** D********
|
||||
1 | Title |
President and EVP Product Management and Marketing
|
||||
1 | Telephone Number |
217-4********
|
||||
1 | Fax Number |
217-4********
|
||||
1 |
c******@horizonhobby.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Centre of Testing Service Co., LTD
|
||||
1 | Name |
S******** Z******
|
||||
1 | Physical Address |
A101, No.65, Zhuji Highway,Tianhe District
|
||||
1 |
Guangzhou
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
86-20********
|
||||
1 |
c******@cts-lab.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Surface Receiver with Telemetry | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Centre of Testing service Co., Ltd
|
||||
1 | Name |
V****** Y****
|
||||
1 | Telephone Number |
86-20********
|
||||
1 | Fax Number |
86-20********
|
||||
1 |
v******@cts-lab.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 20 | 2404.00000000 | 2476.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC