Quiet Touch Training E-Kit TQ208 / TQ107 / TQ208Z Instruction Manual Bedienungsanleitung Manuel d'utilisation Manuale di istruzioni Manual de instrucciones Manual de instrues Handleiding
[Safety Precautions and Warnings]
* Be sure to read the following carefully before assembly. To ensure safe assembly, work on a stable, spacious, and level surface. Exercise extreme caution when working in areas where children are present, and ensure that an adult supervises and guides them at all times. Always use the included AC adapter. Do not use the included power cord with other products. Take great care not to pinch your hands or fingers when opening or closing the rack, assembling or attaching the drum pedals, or attaching, removing, or adjusting the position of other parts. Be careful not to overtighten any bolts. Applying excessive force may damage the plastic parts. Do not tighten the square-head bolts on the brackets attached to the back of the snare pad or tom pads without first inserting the rods into them.Tightening the bolts without the rods in place may deform the brackets, rendering them unusable. TQ208 x 1 x 1 x 1 x 3 x 1 x 3 x 1 x 1 x 2 x 1 x 1 x 2 x 1 x 1 x 1 TQ107 x 1 x 1 x 1 x 3 x 1 x 3 x 1 x 2 x 2 x 1 x 1 x 2 x 1 TQ208Z x 1 x 3 x 1 x 1 x 1 x 2 x 1 x 1 x 2 x 1 x 1 Assembling the stand Installing each part to the stand x 2 x 1 x 2 x 1 TQ208 / TQ208Z x 3 x 3 x 1 x 1 TQ107 x 3 x 3 x 1 TQ208 CR RD TT1 TT2 HH SD HHP TT3 BD CR/RD/HH SD/TT1/TT2/TT3 BD HHP TQ107 CR RD TT1 TT2 HH SD HHP TT3 BD CR/RD/HH SD/TT1/TT2/TT3 BD/HHP TQ208 / TQ107 Module Description:Part Names and Functions 1. Front Panel 2. Sound Select Button 3. Volume Knob 4. Power Button 5. Bluetooth Butn 10 6 7 8 9 6 7 8 9 1. Front Panel Displays the operating status and settings of the module. You can check information such as power status, selected sound, and connection status. 2. Sound Select Button Allows you to switch between the 8 built-in sounds. Each press of the button changes the sound sequentially. 3. Volume Knob Adjusts the overall output volume of the unit. Controls the volume of the drum sounds as well as external audio input
(AUX IN / Bluetooth). 4. Power Button Turns the power of the unit on and off. When the power is turned on, the module starts up and is ready for use. 5. Bluetooth Button Press and hold this button to activate the Bluetooth function. You can connect a smartphone or other Bluetooth-enabled device and play external audio wirelessly through the unit. 6. OUTPUT An output jack for connecting to external equipment such as an amplifier or speaker. Outputs the drum sounds and audio input from AUX IN. 7. PHONES A jack for connecting headphones or earphones. Allows you to enjoy playing without disturbing others. 8. AUX IN An input jack for connecting external devices such as a smartphone or audio player. The input audio will be mixed with the drum sounds and played through the outputs. 9. DC IN The power input jack for connecting the supplied AC adapter. Using MIDI controller What Is a MIDI Controller?A MIDI controller is a device that transmits performance data (such as strike intensity and timing) to external devices as MIDI signals. This product allows you to output the performance data from an electronic drum set as MIDI signals. How to UseConnect this product to a computer or external sound source using a standard USB cable.When you strike a pad, a MIDI signal is transmitted, and sound is produced by the connected sound source (such as a DTM software sound source). Important NotesMIDI signals are not audio.Sound is produced by the connected device (computer or sound source).Settings on the sound source side may be required. Important Notes When Using Pedals from Other brand If you are using a pedal other than the one provided, first loosen the hex head bolt indicated by the red circle, attach the pedal, and then tighten the hex head bolt. Main Specifications FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IC Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. Cet appareil contient des metteurs /
rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences et Dveloppement conomique Canada. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.a
