FCC ID: 2AXGP-DIACOM DIACOM-LITE-FREQ

Diacom Technology INFORMATION-MEASURING DEVICES OF THE DIACOM TYPE WITH A LOW FREQUENCY GENERATOR MODULE UP TO 1 MHZ AND FREQUENCY GENERATORS UP TO 1 MHZ Diacom-Lite-FREQ, Diacom-Lite-FREQ-Euro Diacom-Lite-FREQ-Utium, Diacom-SOLO-NLS, Diacom-NLS-minica, Diacom-SOLO-FREQ-Personal-Medio, Diacom-SOLO-FREQ-Home, Diacom-SOLO-FREQ-PC User manual Guarantee manual Warranty certificates Czech Republic Prague 2020 TABLE OF CONTENTS Introduction. About devices. Minimum system requirements to can operate the Diacom devices. How to connect the "Diacom" device to the computer. How to operate the devices Diacom-Lite-FREQ, Diacom-Lite-

FREQ-Euro, Diacom-Lite-FREQ-Utium, Diacom-SOLO-

NLS, Diacom-NLS-minica, Diacom-SOLO-FREQ-Personal-

Medio, Diacom-SOLO-FREQ-Home, Diacom-SOLO-FREQ-

PC. Design and technical features and differences of devices, a brief description. Block diagram of the "Diacom" device. Conditions of the limited warranty. Release data. Information on repair works performed. 3 5 5 5 6 6 8 8 10 12 Czech Republic Prague 2020 2 2 Introduction. The present devices have been developed on the basis of own researches as a result of which the invention which has become a basis of manufacture of the above-stated devices has been carried out. Subsequently, a patent for the invention was obtained, confirming the originality of the technology used in the devices, under the number - RU0002721874. https://patentscope.wipo.int/search/en/detail.jsf?docid=ru238125876&_cid=p22-kbphxg-10666-

The invention belongs to the methods of diagnostics by physical parameters, in particular, diagnostics of electromagnetic fluctuations of biologically active zones and their influence on the human body, as well as diagnostics of the human body in case of violations at the cellular level. A method of detecting oscillations of low-current electromagnetic fields, wherein near an object of investigation, weak electromagnetic radiation is successively generated with frequencies from a set of desired frequencies; then parameters of frequency attenuation amplitude in the inductance coil circuit are recorded and the obtained data are compared with measurement data of similar parameters in the absence of the object of investigation; if discrepancies are detected, the given frequency is identified as searched, data on it is entered into a database for subsequent comparative analysis. The publication was also carried out in the international scientific research journal

"Science and World", number # 9 part # 2 of 2017. http://scienceph.ru/f/science_and_world_no_9_49_september_vol_ii_0.pdf The article is on page 26. This article discusses methods for registering oscillations of the electromagnetic field of cells or "Biomagnetism", as a basic source of information about the state of the cell and its upcoming changes. Understanding the nature of the phenomenon will help to carry out inexpensive, early diagnosis of various human pathologies, as well as prevent not only its consequences, but also completely eliminate diseases that can be caused by functional disorders in the body cells. This publication is caused by the need to clarify the chaos that has arisen in the field of the latest diagnostic methods based on the developments and achievements of recent years, which have allowed making a significant breakthrough in understanding the structure of cells and information metabolism between them. The full text of the article can be read at:

http://scienceph.ru/f/science_and_world_no_9_49_september_vol_ii_0.pdf Certification plays a very important role in product manufacturing. 3 Czech Republic Prague 2020 All products have passed the necessary certification in the Czech Republic and in several other countries. Can be marked with a sign INSTRUCTION TO THE USER

. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 18 of the FCC Rules. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

* Reorient or relocate the receiving antenna.

* Increase the separation between the equipment and receiver.

* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

* Consult the dealer or an experienced radio/TV technician for help. Operation with non-approved equipment is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the users authority to operate this equipment. Czech Republic Prague 2020 4 About the devices. Devices are designed for generation and measurement of electromagnetic oscillations by method of comparison of natural frequency of internal generator and frequency of measured object. Data can be displayed on a computer monitor and presented in graphic form and in the form of digital arrays, for subsequent analysis. To operate devices, Diacom Technology has developed a number of programs that can be downloaded on the company's website at www.diacom.technology in the "Programs" section. A conventional unit is used to measure data. A signal span ranges from 0 to 100 conventional units. The device can also generate frequencies up to 1 MHz. The software also uses various graphical indicators when working. The software is designed for detection of biologically active zones, analysis of their changes, as well as for detection of pathogenic microflora, which can affect the normal vital activity of humans and animals. Studying and analyzing the general mutual influence of pathogenic microflora and changes in electromagnetic fluctuation in these processes. In order to obtain the skills of correct work with the software developed by Diacom, it is necessary to undergo training. Minimum system requirements for "Diacom" devices. Intel-Core i5 or higher processor at least 2.0 GHz, RAM is not less than SSD Disk Space Screen permission is minimum:

Monitor OS isn't lower One free 1360768 High Color 16 bit 17 and more Windows 10 and above USB port. RAM OF 6 GB, 10 GB How to connect the "Diacom" device to the computer. Before connecting the device to your computer, you should download the necessary software from the company's website, to the web addresses indicated on the packing list or from the web address: www.diacom.technology. Install the driver of your device, according to its name, the standard method for installing drivers for Windows OS, "Warning" when connecting the device to your computer, you may need to confirm that the device driver is up-to-date, which is not its reinstallation. Next, we install software to operate the device. Run the Software Installation Wizard and, by clicking the active buttons of the Installation Wizard sequentially, carefully reading its messages until a button appears indicating that the installation has finished, install the device software on your computer. Each device type has its own software package. Czech Republic Prague 2020 5 How to operate the devices Diacom-Lite-FREQ, Diacom-Lite-FREQ-Euro, Diacom-

Lite-FREQ-Utium, Diacom-SOLO-NLS, Diacom-NLS-minica, Diacom-SOLO-

FREQ-Personal-Medio, Diacom-SOLO-FREQ-Home, Diacom-SOLO-FREQ-PC. 1. Connect the "Diacom" device to a computer with software and drivers installed. 2. Turn on the device with the toggle switch located at the back panel. ("Diacom-SOLO-

FREQ-PC" turns on immediately when connected to a computer and is not equipped with a toggle switch). 3. Run the required program. Disconnect in reverse order!

Attention!

Supplying more than 3 V. electrical voltage to the inputs of the "Diacom" device can lead to a failure of the input and output circuits of the device and make it unsuitable for further operation, while the warranty obligations will lose force. Any attempt to open the device or remove the protective sticker deprives the owner of the device of the warranty, and the manufacturer is not responsible for the consequences of these actions!

Design and technical features and differences of devices, a brief description. Diacom-Lite-FREQ - the device is equipped with a measuring module, intra-circuit heterodyne and a module for additional generation of low frequency. Designed to work with programs measuring the frequency of low-precision oscillations and low frequency modulation programs. Diacom-Lite-FREQ-EURO - the device is equipped with a measuring module, intra-

circuit heterodyne and a module for additional generation of low frequency. It is designed to work with programs for measuring the frequency of low-current oscillations and programs for modulation of low frequency. Diacom-Lite-FREQ-Utium - the device is equipped with a measuring module, an in-

circuit heterodyne and a module for additional low-frequency generation. It is designed to work with programs for measuring the frequency of low-current oscillations and programs for modulation of low frequency. Diacom-SOLO-NLS - device is equipped with measuring module, internal circuit local oscillator. Designed to work with programs for measuring the frequency of low-current oscillations. Diacom-NLS-minica - The device is equipped with a measuring module, internal circuit heterodyne. Designed to work with programs for measuring the frequency of low-current oscillations. Diacom-SOLO-FREQ-PC - the device is equipped with an internal circuit module of a low-power digital generator of low frequency. Designed to work with low-frequency modulation programs using a low-power digital generator. Diacom-SOLO-FREQ-Personal-Medio - the device is equipped with an internal circuit module of a low-power digital generator of low frequency. It is designed to work independently with its own low frequency modulation program using a digital low power generator. Equipped with a graphic display. Czech Republic Prague 2020 6 Diacom-SOLO-FREQ-Home - the device is equipped with an internal circuit module of a low-power digital generator of low frequency. It is designed to work independently with its own low frequency modulation program using a digital low power generator. Equipped with LED indication. It differs from "Diacom-SOLO-FREQ-Personal-Medio" by a simplified proprietary program with predefined lists of specialized frequencies for the destruction of pathogenic microflora. Czech Republic Prague 2020 7 Block diagram of the "Diacom" device. Computer Computer Pairing Module Microcontroller with in-

circuit generator Measuring module Low-power digital low-

frequency electrical pulse generator module Means of measurement based on an electromagnetic inductive coil Output Czech Republic Prague 2020 8 Limited warranty conditions. The devices are manufactured in the Czech Republic. This warranty applies to all Diacom information and measurement devices, except for components and accessories that are not part of the main unit and are subject to mechanical impact during operation. These components and accessories, as defined by the manufacturer, are consumables. Such components are - cables, wires and accessories that do not contain active radio components (bio-inductors). On such components and accessories, the manufacturer does not install a sealing mark (security sticker, sealing). The start of the warranty period is considered the date of sale of the device and its commissioning and continues for the next two years. Delivery and receipt of the device for repair is the responsibility of the user and is paid by him independently. The manufacturer, at its sole discretion, can accept payment of transportation costs associated with warranty repairs and maintenance of the device. manufacturer. The warranty obligation is renewable when a product is replaced with a more advanced one before the warranty period expires within the framework of companies and shares held by the A defective device may be repaired or replaced with a similar device, at the manufacturer's discretion, provided that this action is not detrimental to the consumer. Consumables can be purchased by the user additionally or under other conditions, by agreement with the manufacturer of the devices. The warranty can be suspended if in the course of operation, the device was subject to mechanical impact, moisture, which led to its physical breakdown, failure, or if there were violations of the rules of operation of the device in terms of exposure to electrical voltage, as well as unauthorized attempts to open the device and damage the protective stickers. Device that has passed the activation is not refundable!

* The terms of warranty service of the "Diacom" device are familiarized. I have no claims. _____________________ / _________________________________________/

Czech Republic Prague 2020 9 Release data. Type (marking) of the device:

*Diacom- _____________________________________________________________

* Serial number of the device: __________________________________ From vendor ________________________ Official seal affixed by vendor Dealer (vendor): ______________________________________________________

*Device sale date: ___________________________20____.

*from dealer __________________________ Official seal affixed by dealer

(!) the warranty is invalid without filled-in fields indicated by an asterisk and seals. Czech Republic Prague 2020 10 Device acceptance and sourcing information. Date of issue ______________________________ 20_____. Complete set:

Main device Bio-inductors Reprinter FREQ cables USB cable Manual Cardboard packaging Case The device is packed __________________________________________ Date ______ ____________ 20_____.

* I have read the terms of sale and warranty obligations (see above) :

__________________________ ( _____________________________________ ) ____ __________20____ . Czech Republic Prague 2020 11 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Information on repair works performed. Date of acceptance for repair _________________________ Comissioning date _________________________ Cause of malfunction _________________________ Signatire (name of the receiver) _______________________ ____________________________________________________________ Official seal affixed by Vendor Official seal affixed by receiver signature __________ signature ________________

Date of acceptance for repair _________________________ Comissioning date _________________________ Cause of malfunction _________________________ Signature (name of the receiver) _______________________ ____________________________________________________________ Official seal affixed by Vendor Official seal affixed by receiver signature __________ signature ________________

Date of acceptance for repair ________________________ Comissioning date _________________________ Cause of malfunction _________________________ Signature (name of the receiver) _______________________ ____________________________________________________________ Official seal affixed by Vendor Official seal affixed by receiver signature __________ signature ________________

* Without filling in the fields marked with an asterisk, the warranty is invalid. Czech Republic Prague 2020 12 Diacom Technology Mkrtchyan Khachatur Jedova 189, Neratovice 277 11 Czech Republic. Produced in EU Czech Republic Prague 2020 13

FCC ID: 2AXGP-DIACOM LABEL INFORMATION:

1. The label will be located on the bottom of the device, at the top left corner. (Please see the

"Label photo" below) 2. UL 969 Approved Label / Permanent pressure sensitive adhesive (Please see the attachment "UL Certification) 3. The size is 2 X 1 inch PGGU2.MH16621 - Marking and Labeling System Materials - Component Page 1 of 1 Marking and Labeling System Materials - Component PGGU2.MH16621 Page Bottom Marking and Labeling System Materials - Component See General Information for Marking and Labeling System Materials - Component MH16621 GENERAL FORMULATIONS 320 S UNION P O BOX 158 SPARTA, MI 49345 USA Pressure-sensitive overlaminations:

Model No. Type of Label Stock Max Temp Min Temp

(C)

(C) Indoor Use Outdoor Use Additional Conditions C1-OL-AP, M1-OL-AP Polyester Vinyl 150 80

-40

-40 Pressure-sensitive unprinted label stocks:

Aluminum (AL) 150 VFW-NTC-AP, VFW-TC-AP Aluminum (AL) 60

-40

-40 Marking: Company name and model designation. Last Updated on 2009-03-17 X X X X

Model No. Application Surface Max Temp Min Temp

(C)

(C) Indoor Use Outdoor Use Additional Conditions C1-STC-AP, C15-STC-AP, C2-STC-AP, S2-STC-AP, G2-STC-AP, BS2-STC-AP, BG2-STC-AP, W2-STC-AP Questions?

Print this page Terms of Use Page Top When the UL Leaf Mark is on the product, or when the word "Environment" is included in the UL Mark, please search the UL Environment database for additional information regarding this product's certification. The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: " 2013 UL LLC". 2013 UL LLC file://S:\GFI Server\Lab\Underwriters Laboratory Certifications\2013 Marking and Labelin... 7/30/2013

September 24, 2020 Electronics TCB Compatible 114 Olinda Drive Brea, CA 92823 Greetings, of authorization This is a letter employees of Compatible to sign applications behalf, and exchange with certification of the following and to receive to accept Compatible Electronics, Inc., specific ally including the Electronics, as an Agent for House of Haas, Inc, for a period of one year, before the Commission on our behalf, to make representations to you on our data between our company and the Commission in connection House of Haos, Inc. product: DIACOM-LIT E-FREQ Model: UTIUM designed The UTIUM is a device to 1 MHz. (Dimensions:

156 x 180 x 36 mm) Clock Frequency:

5 GHz. to scan and generate low-frequency electromagnetic frequencie s up also accept this letter as an attestation that neither House of Haas, Inc. nor any of its officers, 5% or more of the outstanding stock or shares, voting or non-voting, or persons Please directors, have been denied federal 853(a). In addition, time, the situation changes causing benefits holding House of Haas, Inc. will notify the Federal Communications under section 5301 of the Anti-Drug-Abuse act of 1988,21 Commission U.S.C. if, at any House of Haas, Inc to be denied federal benefits. If you have any further questions

(424) 532-1444. or need additional information, please feel free to give me a call at David Galustov House of Haas, Inc. 14039 Sherman Way #102 Van Nuys, CA 91405

September 24, 2020 Compatible Electronics TCB 114 Olinda Drive Brea, California 92823 Re: FCC ID: 2AXGP-DIACOM Subject: Request for withholding from public disclosure the Schematics and Operational Description Pursuant to an application for certification. Greetings, We, House of Haos, Inc., would like to request that all Schematics and Operational Description submitted with the application for certification be withheld from public disclosure as per Section 0.459 of FCC Rules. This request is made under the provisions of Section 0.457 (d) of the Commission's Rules, and Section 552 (b)(4) of the Freedom of Information Act. These sections authorize the withholding from Public inspection, those materials which would be privileged as a matter of law if retained by the Person submitting them, and materials which would not customarily be released to the public by that person. fyou have any questions, please do not hesitate to contact us at (424) 532-1444, Sincerely, XL , Galustov House of Haos, Inc. 14039 Sherman Way #102 Van Nuys, CA 91405

September 24, 2020 Compatible Electronics TCB 114 Olinda Drive Brea, CA 92823 Greetings, We, House of Haos, Inc. attest that our product, FCC 1D: 2AXGP-DIACOM, in accordance with the FCC 18.303 Prohibited frequency bands will not and is incapable of operating within the following prohibited safety, search and rescue frequency bands: 490-510 kHz, 2170-2194 kHz, 8354-8374 kHz, 121.4-121.6 MHz, 156.7-156.9 MHz, and 242.8-243.2 MHz is If you have any further questions or need additional information, please feel free to give me a call at

(424) 532-1444. Sincerely, risk David Galustov House of Haos, Inc. 14039 Sherman Way #102 Van Nuys, CA 91405

September 24, 2020 Compatible Electronics TCB 114 Olinda Drive Brea, California 92823 Subject: TCB application submittal Greetings, We, House of Haos, Inc. would like to declare that the application being submitted for the device with FCC ID: 2AXGP-DIACOM , has not been, submitted to another TCB or FCC for certification. If you have any questions, please do not hesitate to contact us at (424)532-1444. Sincerely, X bef David Galustov House of Haos, Inc. 14039 Sherman Way #102 Van Nuys, CA 91405