Taiwan NCC R3A304 RoHS RoHS Thailand or www.poly.com/rohs
......... Russia
. MFi Made for iPhone 13 Pro Max, iPhone 13 Pro, iPhone 13, iPhone 13 mini, iPhone 12 Pro Max, iPhone 12 Pro, iPhone 12, iPhone 12 mini, iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE (2nd generation), iPad Pro 12.9-inch (5th generation), iPad Pro 11-inch
(3rd generation), iPad Pro 12.9-inch (1st generation), iPad Pro 9.7-inch, iPad Air (4th generation), iPad Air 2, iPad mini 4, iPad mini 3, iPad mini 2, iPad (6th generation), iPad (5th generation). FreeRTOS software Permission is hereby granted, free of charge, to any person obtaining a copy of this FreeRTOS software and associated documentation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. For CBVS1 Wireless Charge Stand only Note: This equipment has been tested and found to comply with the limits for consumer ISM equipment, pursuant to part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Regulatory Compliance Information United States/Puerto Rico A/V ICTE Declaration of Conformity/FCC Regulatory Information We Plantronics Inc, 345 Encinal Street Santa Cruz, California, 95060 USA
(800) 544-4660 declare under our sole responsibility that the products VS85T, CBVS1, BT700C comply with Part 15 of the FCC Rules. Operation is subject the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any 81242 interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on another circuit. 4. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. BC Exposure to RF Radiation The internal wireless radio operates within the guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. Independent studies have shown that the internal wireless radio is safe for use by consumers. Visit poly.com for more information. In order to comply with FCC and ISED RF Exposure requirements, the base must be installed and operated such that a minimum separation distance of 20 cm is maintained between the base and all persons during normal operation. NOTE: Modifications not expressly approved by Plantronics, Inc. could void the users authority to operate the equipment. Canada CAN ICES-003 (B)/NMB-003(B) CAN RSS-216 / CNR-216 ISED Canada Regulatory Information This device complies with ISED licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dISED applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. Cet quipement est conforme aux limites dexposition de radiation ISED noncs pour un environnement non contrl. Argentina Australia/New Zealand C-29549 C-25745 R-NZ TELEPERMIT Telepermit Holder:
Telco Approvals Ltd Product:
Poly Voyager Surround 80 Headset PTC 208 / 23 / 005 Brazil Este equipamento no tem direito proteo contra interferncia prejudicial e no pode causar interferncia em sistemas devidamente autorizados. Modelos: VS85T xxxxx-xx-xxxxx Europe France The product operates in 2400-2483.5 Product recycling/Rgles de tri MHz ISM band with the maximum RF transmit power less than 0.1w EIRP. FR Cet appareil ses accessoires se recyclent China DPOSER EN MAGASIN DPOSER EN DCHTERIE OU Italy Japan VCCI Class B statement:
R 201-230510 R 201-200833 VCCI-B
(B)
, . Korea R-C-hpi-VS85T R-C-PLT-BT700C R-C-hpi-CBVS1
(SAR: Specific Absorption Rate) 1.6[W/kg]
. Mexico
. 0 mm Requisitos de la FCC (seccin 15) y por el IFT Su uso est sujeto a las dos condiciones siguientes:
1. Este dispositivo no puede causar interferencias nocivas. 2. Este dispositivo debe aceptar todas las interferencias recibidas,incluidas aquellas que puedan causar un funcionamiento no deseado. Singapore UAE Philippines ESD-RCE-2024370 Complies with IMDA Standards DA101619 2023 Poly. Apple and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. All trademarks are the property of their respective owners. RMN (
215543-48 09.23
): VS85T, CBVS1, BT700C