eM300-8a V2R1 V200R001 User Manual Issue Date V1.0 2018-02-28 HUAWEI TECHNOLOGIES CO., LTD. Copyright Huawei Technologies Co., Ltd. 2017. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address:
Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website:
http://www.huawei.com Email:
support@huawei.com Issue V1.1 (2018-01-08) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd i eM300-8a V2R1 V200R001 Product Description Contents Contents 1 Product Overview ......................................................................................................................... 1 2 Application Scenarios .................................................................................................................. 2 3 Technical Specifications .............................................................................................................. 3 3.1 Hardware Specifications ............................................................................................................................................... 3 3.2 Software Specifications ................................................................................................................................................ 4 3.3 900M Antenna Specifications ....................................................................................................................................... 5 3.4 eLTE-IoT Module eM300-8a Antenna Design Guide ................................................................................................... 6 4 Services and Applications ........................................................................................................... 9 5 Standards Compliance ................................................................................................................. 10 6 Packing List .................................................................................................................................. 11 7 FCC Regulations .......................................................................................................................... 12 A Acronyms and Abbreviations .................................................................................................. 14 Issue V1.1 (2018-01-08) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd ii eM300-8a V2R1 V200R001 Product Description Contents 1 Product Overview Description Highlights Huawei eLTE-IoT module series are the wireless modules designed for the Internet of Things
(IoT) industry, providing narrowband and low-power-consumption radio data bearer for interconnection with the network. Huawei eLTE-IoT module series also provide a UART port for integration into various industrial devices. The eLTE-IoT eM300-8a V2R1 V200R001 module has the following characteristics:
Support for the 902-928 MHz frequency band eLTE-IoT data service High sensitivity and low power consumption Appearance Support for UART ports, meeting the integration and interconnection requirements of most industrial devices Support for remote management Support for authentication without SIM cards Figure 1-1 shows the appearance of the module. Figure 1-1 Appearance of the module Issue V1.1 (2018-01-08) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd 1 eM300-8a V2R1 V200R001 Product Description Contents 2 Application Scenarios The eLTE-IoT module provides narrowband IoT access for customers in vertical industries. It is applicable to the fixed IoT access scenarios of enterprise and industry customers, meeting the requirements of low power consumption, high sensitivity, and deep coverage. Figure 2-1 Example of IoT application scenarios of the eLTE-IoT module in vertical industries 2 Issue V1.1 (2018-01-08) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd eM300-8a V2R1 V200R001 Product Description Contents 3 Technical Specifications 3.1 Hardware Specifications Table 3-1 shows the hardware specifications of the eLTE-IoT module. Table 3-1 Hardware specifications of the eM300-8a V2R1 V200R001 module Category Technical standard Working frequency External Interface Description eLTE-IoT Litefire 1.1 System bandwidth: 1.8 MHz, subcarrier bandwidth: UL:
3.75 KHz, DL: 15 KHz/3.75 KHz eLTE-IoT 902-928 MHz Support for UART ports (<1000bytes receiving block@9600 baud rate in low power mode,>=1000bytes receiving block@57600 baud rate in normal mode) Package: 94PIN-LCC+LGA Transmit power eLTE-IoT 261dBm Receiver sensitivity Power consumption Power eLTE-IoT Downlink receiver sensitivity reaches -136 dBm, meeting the 5 km suburban coverage requirement. eM300-8a22.4uw@PSM0.46w@Tx=20dBm VBAT supply voltage: 3.3V ~ 3.8V Typical supply voltage: 3.6V VDD_EXT supply voltage: 1.8V or 3.0V Dimension 19.9 23.6 2.2mm Weight
< 3g Temperature Operating temperature: -40oC to +75oC Storage temperature: -40oC to +85oC Issue V1.1 (2018-01-08) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd 3 eM300-8a V2R1 V200R001 Product Description Humidity 5% to 95%
Contents It is recommended that the devices be deployed on live networks within 3 months after arrival, or stored in the following environment:
Temperature: -10oC to 35oC Relative humidity (RH): 30% to 85%
The temperature and humidity equipment and dehumidification equipment must be installed in the storage environment to monitor and adjust temperature and humidity. 3.2 Software Specifications Table 3-2 shows the software specifications of the eLTE-IoT module. Table 3-2 Software specifications of the eLTE-IoT module Item Description eLTE-IoT Support the eLTE-IoT protocol:
Support uplink frequency hopping (HP) sending to comply with the regulations on unlicensed spectra in Latin America. Support authentication without SIM cards Support deregistration on the core network Support HTTP persistent connection and support network-initiated downlink query function if power saving is not required Support uplink ALOHA access Support the RLC ARQ mechanism to ensure the reliable transmission of services Support open loop power control to meet the dynamic receive power range requirement of base stations Performance Data transmission capability: UL: 10 kbit/s(Max) ; DL: 15 kbit/s(Max) Communication interface Support AT command and interconnection with external devices through serial ports Upgrade Support Certification Federal Communications Commission (FCC) certification Product maintenance Support the maintenance and commissioning through the serial port Issue V1.1 (2018-01-08) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd 4 eM300-8a V2R1 V200R001 Product Description 3.3 900M Antenna Specifications Contents Parameters Range Frequency Band 902-928 Bandwidth (typ.) 30 Peak Gain (typ.) VSWR Polarization Pattern Impedance Dimensions Connector 2.5 2 (max) Linear Omni-directional 50 RP-SMA Unit MHz MHz dBi mm 50mm Issue V1.1 (2018-01-08) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd 5 eM300-8a V2R1 V200R001 Product Description Contents 3.4 eLTE-IoT Module eM300-8a Antenna Design Guide Users should connect antennas to eM300-8as antenna pads through micro-strip line or other types of RF trace and the trace impedance must be controlled in 50.Reference Design recommends that the total insert on loss between the antenna pads and antennas should meet the following requirements:
Trace loss Frequency 902MHz-928MHz loss 0.5dB To facilitate the antenna tuning and certification test ,a RF connector and an antenna matching circuit should be added.The following figure is the recommended circuit. Issue V1.1 (2018-01-08) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd 6 eM300-8a V2R1 V200R001 Product Description Contents Antenna matching circuitRF_ANT In figure ,the componenets R5,C13,C14and C50 or C51 are used for antenna matching. The value of componnets can only be achieved after the antenna tuning and usually provided by antenna vendor.By default,the R5 are 0 resistors,and the C13,C14 are 4.7pFand they are reserved for tuning Issue V1.1 (2018-01-08) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd 7 eM300-8a V2R1 V200R001 Product Description Contents The RF test connector is used for the conducted RF performance test,and should be placed as close as to the modules RF_ANT pin.The traces impedance between eM300-8a and antenna must be controlled in 50 Issue V1.1 (2018-01-08) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd 8 eM300-8a V2R1 V200R001 Product Description Contents 4 Services and Applications Data Services The eLTE-IoT module performs IoT data backhaul after being integrated by devices through the serial port. Local Management and Maintenance The eLTE-IoT module supports the maintenance and commissioning through the serial port. Remote Management and Maintenance The eLTE-IoT module support remote device management. Issue V1.1 (2018-01-08) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd 9 eM300-8a V2R1 V200R001 Product Description Contents 5 Standards Compliance Communication Protocol Table 5-1shows the standards and communication protocols that the eLTE-IoT module complies with. Table 5-1 Communication protocol Item Wireless Description eLTE-IoT Issue V1.1 (2018-01-08) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd 10 eM300-8a V2R1 V200R001 Product Description Contents 6 Packing List Table 6-1 shows the packing list of the eLTE-IoT module. Table 6-1 Packing list of the eLTE-IoT module Item Quantity Description eM300-8a V2R1 1 Standard option Issue V1.1 (2018-01-08) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd 11 eM300-8a V2R1 V200R001 Product Description Contents 7 FCC Regulations FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. RF Exposure Information This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. Issue V1.1 (2018-01-08) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd 12 eM300-8a V2R1 V200R001 Product Description IMPORTANT NOTE:
Contents This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for a population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID:
QISEM300-8AMC". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be Available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may cause undesired operation. Issue V1.1 (2018-01-08) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd 13 eM300-8a V2R1 V200R001 Product Description Contents A Acronyms and Abbreviations PSM IOT Power Save Model Internet Of Things Issue V1.1 (2018-01-08) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd 14